Machinery and tools. The appropriate system for every workshop.

Size: px

Start display at page:

Download "Machinery and tools. The appropriate system for every workshop."

Lionel Greene
5 years ago
Views:

to rely on tools that are just as professional.

extremely robust and allow you to manage all works in this area

1 The appropriate system for every workshop. Everyone working professionally in orthopedics has to be able to rely on tools that are just as professional. This is the case for smaller workshops but also for large industrial factories. Minke offers high-performance machinery which are constructed extremely robust and allow you to manage all works in this area fast, reliably and above all economically. Due to made-to-measure solutions, Minke offers the proper system for all workshops. Machinery and tools

The worldwide tried and tested deep drawing system with four highly efficient models used for crimping and deep drawing.

VACUTHERM guaranteed success for orthopedic quality work.

Including reduction frames to reduce the deep drawing area to 400 x 450 mm. Recessing box for leg lasts and an adjustable heating plate for each drawing area.

No. 8170.22 VACUTHERM PC 5A Size, form and function correspond to those of the classic PC 4A.

2 The worldwide tried and tested deep drawing system with four highly efficient models used for crimping and deep drawing. For smaller workshops as well as for large industrial factories. Robust systems, that allow you to manage all works in this area fast, reliably and above all economically. VACUTHERM guaranteed success for orthopedic quality work. F 2 VACUTHERM PC 4A Due to a larger drawing area, the PC 4A offers best conditions for all common crimping and deep drawing processes. Including reduction frames to reduce the deep drawing area to 400 x 450 mm. Recessing box for leg lasts and an adjustable heating plate for each drawing area. 620 mm 625 mm 1070 mm Drawing area 600 x 450 mm Reduction frame 450 x 400 mm 400 V, 50 Hz, ca. 4.3 kw Nominal suction capacity 16 m 3 /h Sound pressure level 60 dba Final pressure 2 mbar Art.No VACUTHERM PC 5A Size, form and function correspond to those of the classic PC 4A. In addition to that, it is equipped with the Minke positioning pad, a vacuum controlled positioning and stabilizing aid. It allows you to position and fix the part, which is to be shaped (lasts, crimping wood), in any possible position. 620 mm 625 mm 1070 mm Drawing area 600 x 450 mm Reduction frame 450 x 400 mm 400 V, 50 Hz, ca. 4.3 kw Nominal suction capacity 16 m 3 /h Sound pressure level 60 dba Final pressure 2 mbar Art.No

VACUTHERM PC 3A Taking care of smaller jobs in a fast and uncomplicated way. 435 mm 625 mm 970 mm Drawing area 400 x 450 mm 400 V, 50 Hz, ca.

03 F 3 VACUTHERM PC 2A For orthopedic (large-scale) workshops.

Smaller shaping parts can be processed by reducing the deep drawing area to 400 x 450 mm using the reduction frame.

No. 8170.12 VACUFORM Compact table set for smaller crimping works with thermoplastic materials.

3 VACUTHERM PC 3A Taking care of smaller jobs in a fast and uncomplicated way. 435 mm 625 mm 970 mm Drawing area 400 x 450 mm 400 V, 50 Hz, ca. 3 kw Nominal suction capacity 16 m 3 /h Sound pressure level 60 dba Final pressure 2 mbar Art.No F 3 VACUTHERM PC 2A For orthopedic (large-scale) workshops. The 650 x 750 mm drawing area offers enough room for corsets, thighs-/lower leg models, leg lasts, etc. Smaller shaping parts can be processed by reducing the deep drawing area to 400 x 450 mm using the reduction frame. 725 mm 850 mm 1850 mm Drawing area 650 x 700 mm 400 x 450 mm Nominal suction capacity 400 V, 50 Hz, ca. 8.1 kw Sound pressure level 25 m 3 /h Final pressure 2 mbar Art.No VACUFORM Compact table set for smaller crimping works with thermoplastic materials. Without heating unit, a favorable alternative to the VACUTHERM. Very low sound level because of the use of a compressed air pump (Venturi). 425 mm 600 mm 120 mm Drawing area 410 x 360 mm Nominal suction capacity (open pipe) 39.2 m 3 /h Stored in pressure* 6 bar Final pressure 250 mbar Art.No * the pressure that needs to be stored in so that the Venturi-pump is able to change compressed air to vacuum

Higher cubic capacity for your workshop The MediLift has been a renowned treatment pedestal for years.

platform, bending down is no longer needed when taking measures, plastering etc. in the daily use.

This is why the MediLift is accessible at all times without using up room in your workshop or measuring

F 4 The new MediLift is also available as a fixed wall-mounted.

Folded up, the MediLift juts merely 25 cm off the wall!

4 Higher cubic capacity for your workshop The MediLift has been a renowned treatment pedestal for years. Due to its continuously variable up- and downwards moveable measuring, diagnosis, and treatment platform, bending down is no longer needed when taking measures, plastering etc. in the daily use. The characteristic option of the MediLift, of removing the treatment chair to allow access for wheel chairs, has been made easier. Due to the newly gained mobility, the MediLift can be folded up and put away when it is not needed. This is why the MediLift is accessible at all times without using up room in your workshop or measuring room. It simply disappears silently in a corner behind a curtain! F 4 The new MediLift is also available as a fixed wall-mounted. This guarantees constant accessibility without having supporting feet that claim room. Folded up, the MediLift juts merely 25 cm off the wall! Outside measures folded (L x B x H): 29 x 95 x 151 cm Outside measures unfolded (L x B x H): 145 x 95 x 151 cm Platform size 125 x 95 cm Stroke height up to 100 cm Stroke weight 225 kg 220 V Functions Platform foldable, outer railing attachable, wall-mounting or mobile lifting platform, transport grips and rollers inclusive Art.No

FLÜSTERNDER JAKOB (WHISPERING JACOB) F 5 Compressor with extremely low sound level during the loading process, and

Arranged as a RD-element, it has two air pressure connections with separate pressure regulations and manometers, and it

Extra: Two electricity connections and one main switch.

Because of flexible arrangement possibilities with regard to freely chooseable height, number of shelves, doors or

Starting out from standard element measures (625 x 600 x 830 mm (B x D x H), free grill 540 mm), the height can be chosen

5 FLÜSTERNDER JAKOB (WHISPERING JACOB) F 5 Compressor with extremely low sound level during the loading process, and therefore less disturbing noises in your workshop. Arranged as a RD-element, it has two air pressure connections with separate pressure regulations and manometers, and it supplies enough air for stapler, spraying pistol, compressed air pump, etc. Extra: Two electricity connections and one main switch. Base cabinet for VACUTHERM Made-to-measure base cabinets from the RD-workshop program. Because of flexible arrangement possibilities with regard to freely chooseable height, number of shelves, doors or drawers it is the ideal base for your VACUTHERM. Starting out from standard element measures (625 x 600 x 830 mm (B x D x H), free grill 540 mm), the height can be chosen freely in steps of 3 cm. By choosing the height, the free screen for drawers etc. can be calculated. For detailed information order our RD-workshoparrangement catalogue. 625 mm 600 mm freely chooseable (see RD-program, chapter Workshop arrangement ) Suction capacity 50 l/min Max. pressure 10,5 bar Sound emission 45 db(a)/1m Compressing Air connections 2 Electricity connections 2 Connecting Voltage 220 V, 50 Hz Art.No

F 6 TURBO I + TURBO II The TURBO II airing off, spraying and radiant cabinet allows you to spray color, finish,

Protect yourself from hazardous color mist, dust from sandblasting, or solvent and plastic fumes.

(TURBO I suction cabinet without suction table).

design, the TURBETA workplace with an integrated vacuum unit provides constantly clean air.

your health, because TURBETA, the workplace with venting turbine, filter mat and activated carbon filter exhausts and

6 F 6 TURBO I + TURBO II The TURBO II airing off, spraying and radiant cabinet allows you to spray color, finish, impregnate, sandblast or air off. Also think about the handling of casting resin or glass silk. Protect yourself from hazardous color mist, dust from sandblasting, or solvent and plastic fumes. TURBO II cares for fresh air with a ventilation turbine, filter mat and activated carbon filter provides clean air (TURBO I suction cabinet without suction table). high suction capacity explosion secure engine low noise level small dimensions TURBETA Integrated in the RD-program design, the TURBETA workplace with an integrated vacuum unit provides constantly clean air. Solvents, adhesives, fine dusts, casting resin, glass silk, color and impregnating sprays are no longer a danger for your health, because TURBETA, the workplace with venting turbine, filter mat and activated carbon filter exhausts and filters hazardous fumes. 625 mm 610 mm (TURBO II) 1570 mm (TURBO I) 1610 mm suction table (only TURBO II) 760 mm 220 v, 50 Hz TURBO II Art.No TURBO I Art.No mm 600 mm free-to-chose (see RD-program, chapter Workplace arrangement ) 220 V, 50 Hz Art.No

SPRINTHER Heating cabinet can be used in the RD-program or as a table set.

Outside measures 625 mm 600 mm free-to-chose (RD-program, chapter Workplace arrangement ) Inside

stability and recirculating air heating 220 V, 50 Hz, 2.8 kw Art.No. 9083.

This corrective aspect is the special feature of this shaping system.

For fast heating and activation of all thermoplastics, for reworking and correcting finished

7 SPRINTHER Heating cabinet can be used in the RD-program or as a table set. Temperature scale for all common thermoplastics. Can be used as base for Vacutherm PC 4 and PC 5. Outside measures 625 mm 600 mm free-to-chose (RD-program, chapter Workplace arrangement ) Inside measures 460 mm 420 mm 300 mm Temperature continuously variable, free-to-choose to 250 C stability and recirculating air heating 220 V, 50 Hz, 2.8 kw Art.No PRIMAT 1500 Mobile shaping tool, which can be used for house calls or hospital visits as well as in your own workshop. Two integrated shaping cushions and an integrated vacuum pump in the control panel allow making detailed footprints. Precision steering of the vacuum allow corrections of deformations directly into the cushion. This corrective aspect is the special feature of this shaping system. F 7 SPRINTLI - the handy activating tool for your workshop. For fast heating and activation of all thermoplastics, for reworking and correcting finished products. Activation room 20 l Outside measures 430 mm 380 mm 260 mm Grill measures 280 mm 280 mm Heater (high-grade steel) 1500 W Art.No Case measures Length 620 mm 380 mm 230 mm Weight incl. two cushions 17 kg 220 V, 50 Hz Output continuously variable control bar Art.No shaping cushions, each: Length 430 mm 270 mm 50 mm Art.No

HOTTER I / HOTTER II Activating tool for warming up, heating, drying, activating and

F 8 HOTTER I Electronic temperature regulation and timer, automatic switch-off inclusive.

Fast reacting, robust heating elements for even surface beaming.

HOTTER II Equipment equal to HOTTER I, but it has two heating units (upper and lower

320 mm (600 mm inclusive switchboard) 330 mm 400 mm Flunder 300 x 300 mm regulation

8 HOTTER I / HOTTER II Activating tool for warming up, heating, drying, activating and plasticizing. Available as wall fixing or table setup. F 8 HOTTER I Electronic temperature regulation and timer, automatic switch-off inclusive. Equipped with swiveling Flunder (heat protection), moveable up- and downwards. Fast reacting, robust heating elements for even surface beaming. Direct regulative (beaming) heater. HOTTER II Equipment equal to HOTTER I, but it has two heating units (upper and lower heating). Especially suitable for working table. Accessible from three sides. Direct regulative (beaming) heater. 320 mm (600 mm inclusive switchboard) 330 mm 400 mm Flunder 300 x 300 mm regulation Flunder up to 300 mm 220 V AC, 50 Hz, 2000 Watt Hotter I Art.No mm 330 mm 400 mm Flunder 250 x 310 mm regulation Flunder up to 150 mm 220 V AC, 50 Hz, 2 x 2000 Watt Hotter II Art.No

F 9 BESS technically mature, robust band saw, accident-protective construction very low

water-based materials (e.g. solvent-free adhesives).

air. Roller diameter Engine output Cutting speed Blade length (max.

9 F 9 BESS technically mature, robust band saw, accident-protective construction very low noise level completely non-vibrating PUSTER Warm air fan for quick evaporation of water for water-based materials (e.g. solvent-free adhesives). Since water does not evaporate as quickly as solvents do, adhesion is only assured after a certain period of time. This period can be shortened by using controlled, circulating, wide-ranging, regular warm air. Roller diameter Engine output Cutting speed Blade length (max.) 315 mm 1PS 450/900 m/min 2220 mm 200/220V, 50/60Hz Art.No Total height 750 mm Light height 400 mm 380 mm 350 mm Weight 15 kg Heating output 1.4 kw (Step1), 2.8 kw (Step 2) Total connecting voltage 220 V, 50 Hz Art.No

Varistat for sitting and standing operating mode.

plasters, lasts, cork, foamed or distorted

Lightning fixing without exertion the piece of work is

VARISTAT HP One simple turn loosens the stretching

compressing air tools Model for sitting operation of

10 Varistat for sitting and standing operating mode. F 10 VARISTAT Universal lasting- and working stand. Precise fixing of the piece of work (e.g. plasters, lasts, cork, foamed or distorted installations, etc.) in any position or height. Lightning fixing without exertion the piece of work is removed by the pneumatic stretching and swinging mechanism kick n swing. (Also available with mechanical fixing). VARISTAT HP One simple turn loosens the stretching cuff and adjusts the working height directly to the ergonomically favorable position. Pneumatic operation Additional connection for compressing air tools Model for sitting operation of traverse 600 mm Art.No Model for standing operation of traverse 950 mm Art.No Pneumatic operation Additional connection for compressing air tools For all operating heights of traverse 600 mm 900 mm Art.No

The sign is burnt from an electrically heated embossing plate into the leather or prints a colored foil by using the thermo-transfer technique.

YERRA II YERRA II Embossing press for foil embossing and branding (with automatic foil configuration). F 11 Supporting table Weight Embossing Area Max.

11 YERRA I Embossing press for branding embossing YERRA I Manual embossing press Mark and label your insoles or beddings with your own corporate logo! The marking is either a branding or a multi-colored foil labeling. The sign is burnt from an electrically heated embossing plate into the leather or prints a colored foil by using the thermo-transfer technique. Send us your logo final drawing, and we will manufacture the plate for you! YERRA II YERRA II Embossing press for foil embossing and branding (with automatic foil configuration). F 11 Supporting table Weight Embossing Area Max. operating height Embossing Pressure 190 x 190 mm 200 mm 353 mm 489 mm 35 kg 70 x 90 mm 95 mm 6 kn (600Kp) 220 V AC, 50Hz Art.No Supporting table Weight Embossing Area Max. operating height Embossing Pressure Embossing Pressure 190 x 190 mm 200 mm 353 mm 489 mm 35 kg 70 x 90 mm 95 mm 6 kn (600Kp) 220 V AC, 50Hz Art.No

F 12 HYDRAC The soft force which saves time.

perforation patterns made from plate materials and leather.

In case you have your own idea for stamping knives or molds, send

MENSOR XD Precision measuring tool for differences in height.

preparation, production and fitting of orthopedic aids.

to access, are achieved with the MENSOR XD.

12 F 12 HYDRAC The soft force which saves time. Manual stamp for stamping soles, heels, installations, and perforation patterns made from plate materials and leather. Just order our special Minke stamping knives and mold brochure. In case you have your own idea for stamping knives or molds, send us a drawing and we will manufacture it for you! MENSOR XD Precision measuring tool for differences in height. Precisely measuring tools are of immense importance for the preparation, production and fitting of orthopedic aids. Clear and precise measuring results, even on points that are hard to access, are achieved with the MENSOR XD. Pressure table Weight Pressure plate Stroke height Pressure 300 x 300 mm 300 mm 600 mm 720 mm 80 kg diameter 280 mm 85 mm 5 tons Art.No MENSOR XD Art.No

Mashinery and tools DURA-frame stand DURA Last stand F 13 Floor stand: 5 chrome-plated

Wall stand: 3 chrome-plated rails and retainers.

DURA basic element (free standing) for 300 350 pairs of lasts (requires nur ca. 0.

Floor stand 1650 mm 670 mm Art.No. 8166.

13 Mashinery and tools DURA-frame stand DURA Last stand F 13 Floor stand: 5 chrome-plated rails and retainers. Capacity: bobbins. Wall stand: 3 chrome-plated rails and retainers. Capacity per rail and side: 3 4 bobbins. DURA basic element (free standing) for pairs of lasts (requires nur ca. 0.7 m 2 ). DURA basic element (wall shelf) for pairs of lasts. Floor stand 1650 mm 670 mm Art.No DURA basic element (free standing) Length 1000 mm 2000 mm Basic element Art.No Extension element Art.No Wall stand 830 mm 670 mm Art.No DURA basic element (wall shelf) Length 1000 mm 2000 mm Basis element Art.No Extension element Art.No

TOOLS The Best Choice in Hot Air Tools

TOOLS The Best Choice in Hot Air Tools Hot Air Welders The Quick-SE Hot Air TOOL The versatile Quick-SE is a light, handy, tried and tested hot air welding tool. Ergonomic Handle Design. This Quick-SE