SGR53 SIDE-MOUNTED WEAK-POST GUARDRAIL ATTACHED TO CULVERT PLAN VIEW ELEVATION VIEW DETAIL B DETAIL A SHEET NO. DATE: 37 1/2" 953 (TYP) 150" 3810
|
|
|
- Marjorie Cross
- 5 years ago
- Views:
Transcription
1 PLAN VIEW 150" /2" 953 (TYP) C A B C 8-FBB01 RWB01a FWR01 FWR01 RWB01a RWM04a RWM04a PSF01 FBX08a PSF01 FBX08a DETAIL A DETAIL B 1 of 7 12/5/2016
2 INTENDED USE The Side-Mounted Weak-Post Guardrail Attached to Culvert is designed as a treatment to continue W-beam guardrail systems across large box culverts. It is compatible with the Midwest Guardrail System (MGS) with or without blockouts (SGR20a-c or SGR41), respectively, such that an approach transition would not be required between the two barriers. The Side-Mounted Weak-Post Guardrail Attached to Culvert is an adaptation of the MGS Bridge Rail (SBO02c) with only the socket length and attachment hardware changing. All post and rail components are identical to the original MGS Bridge Rail (SBO02c). The Top-Mounted Weak-Post Guardrail Attached to Culvert is TL-3 crash-worthy, and has been tested according to the Manual for Assessing Safety Hardware (MASH) safety performance criteria. The Side-Mounted Weak-Post Guardrail Attached to Culvert is one of two configurations for the Weak-Post Guardrail Attached to Culvert. The other configuration is a Top-Mounted Weak-Post Guardrail Attached to Culvert (SGR52). A stiffness transition between the new guardrail attached to culvert system and adjacent MGS installation (SGR20a-c or SGR41) is unnecessary. A 75-in. [1905] spacing is recommended between the last S3x5.7 (S76x8.5) culvert post (PSF01) and the first guardrail post of the adjacent MGS installation. The adjacent MGS may be either blocked (SGR20a-c) or non-blocked (SGR41). COMPONENTS Unit Length = 150 [3810] DESIGNATOR COMPONENT NUMBER PSF01 S3x5.7 by 44 long Post and Standoff 4 RWM04a 12-6 W-Beam MGS Section 1/2 Post Spacing 1 RWB01a Gauge W-Beam Backup Plate 4 FBX08a Hex Bolt 5/16-18x1 1/4 x1 1/4 and Nut 4 RWR01 1 3/4"x1 3/4"x1/8 Square Guardrail Washer 4 FBB01 5/8 Dia., 1 1/2" Long Guardrail Bolt and Nut 8 FBX16a Hex Bolt 5/8-11x5 x1 1/2" and Nut Side-Mounted Bracket Assembly 4 FWC20a 3/4 Plain Round Washer 8 FWC12a 1/2" Plain Round Washer 8 FRR20b 3/4" Dia., 11" Long Threaded Rod 8 FNX20a 3/4" Dia. Hex Nut 8 FRR12b 1/2" Dia., 7" Long Threaded Rod 8 FNX12a 1/2 Dia. Hex Nut 8 2 of 7 12/5/2016
3 RWM04a 8-FBB01 FBX08a FWR01 RWB01a PSF01 SIDE-MOUNTED BRACKET ASSEMBLY FBX16a FWC20a FRR20 MIN 16" /2" 368 FNX20a FRR12b SECTION C-C FNX12a FWC12a 3 of 7 12/5/2016
4 ELIGIBILITY FHWA Eligibility Letter B-264, September 29, REFERENCES Schneider, A.J., Rosenbaugh, S.K., Faller, R.K., Sicking, D.L., Lechtenberg, K.A., and Reid, J.D., Safety Performance Evaluation of Weak-Post, W-Beam Guardrail Attached to Culvert, Final Report to the Midwest States Pooled Fund Program, MwRSF Research Report No. TRP , Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, Nebraska, February 12, Rosenbaugh, S.K., Faller, R.K., Lechtenberg, K.A., and Bielenberg, R.W., Weak-Post, W-Beam Guardrail Attachment to Culvert Headwalls, Paper No , Transportation Research Record No. 2437, Journal of the Transportation Research Board, TRB AFB20 Committee on Roadside Safety Design, Transportation Research Board, Washington D.C., January 2014, pages CONTACT INFORMATION Midwest Roadside Safety Facility University of Nebraska-Lincoln 130 Whittier Research Center 2200 Vine Street Lincoln, NE (402) Website: 4 of 7 12/5/2016
5 TOP MOUNTING PLATE GUSSET 1/4" [6] PLAN VIEW ISOMETRIC VIEW 1/4" [6] TUBE TOP MOUNTING PLATE BOTTOM MOUNTING PLATE PROFILE VIEW SIDE-MOUNTED BRACKET ASSEMBLY 5 of 7 12/5/2016
6 3/8" /8" 67 3/4" 19 D THRU 2" /2" /8" 67 3/8" 10 3/8" 10 3/8" 10 1/2" [13] THICK TOP MOUNTING PLATE GUSSET 8" 203 7" /2" 419 1" 25 5/8" 16 D (TYP) 3" /2" 38 1/2" [13] THICK BOTTOM MOUNTING PLATE 10" 254 4"x4"x3/8" [102x102x10] TUBE 1 1/2" 38 3" 76 7" 178 7/8" 22 D (TYP) 1 1/2" 38 1/2" [13] THICK TOP MOUNTING PLATE 6 of 7 12/5/2016
7 SPECIFICATIONS 4 x4 x3/8 Square Tube The square tube shall be ASTM A500 grade B galvanized steel. Top Mounting Plate The top mounting plate shall be ASTM A572 grade 50 galvanized steel. Top Mounting Plate Gusset The top mounting plate gusset shall be ASTM A572 grade 50 galvanized steel. Bottom Mounting Plate The bottom mounting plate shall be ASTM A572 grade 50 galvanized steel. 7 of 7 12/5/2016
SET03a-b THRIE-BEAM BULLNOSE END TERMINAL ELEVATION PLAN SHEET NO. DATE: BEGIN STANDARD THRIE BEAM GUARDRAIL CONSTRUCTION 31 5/8" 804 B B.
BEGIN STANDARD THRIE BEAM GUARDRAIL CONSTRUCTION 177" 4496 9 31 5/8" 804 B B RTM02a 414 3/8" 10525 75" 1905 (TYP) RTM07e 0" [0] RADIUS 37 1/2" 953 (TYP) RTM07d 409 1/2" [10401] RADIUS 2 3 4 5 6 7 8 PLAN
Bridge Railing Research for Local Bridges
Bridge Railing Research for Local Bridges Scott Rosenbaugh Research Engineer Midwest Roadside Safety Facility University of Nebraska-Lincoln 2017 Nebraska Bridge Conference Kearney, NE 4-12-2017 1 Background
Ponderosa Pine Round Posts as Alternative to Rectangular SYP Posts in Retrofit G4(2W) Guardrail Systems
INNOVATIONS IN ROADSIDE SAFETY HARDWARE AND FEATURES Ponderosa Pine Round Posts as Alternative to Rectangular SYP Posts in Retrofit G4(2W) Guardrail Systems KARLA A. LECHTENBERG RONALD K. FALLER JOHN D.
Midwest Guardrail System (MGS) W-Beam to Thrie-Beam Transition
Paper No. 07-2628 Midwest Guardrail System (MGS) W-Beam to Thrie-Beam Transition By Karla A. Polivka University of Nebraska E527 NH (0656) Lincoln, NE 68588 Phone: (402) 472-9070 Fax: (402) 472-2022 kpolivka2@unl.edu
MASH Implementation for Guardrail
MASH Implementation for Guardrail Katherine Smutzer Standards Engineer, INDOT Purdue Road School March 7, 2017 Content in this presentation is for information only. Changes to INDOT design guidance and
DYNAMIC TESTING OF MGS W6X8.5 POSTS AT DECREASED EMBEDMENT
DYNAMIC TESTING OF MGS WX8. POSTS AT DECREASED EMBEDMENT Submitted by Tyler L. Schmidt Undergraduate Research Assistant Robert W. Bielenberg, M.S.M.E., E.I.T. Research Associate Engineer John D. Reid,
TRAFFIC ENGINEERING DIVISION INSTRUCTIONAL & INFORMATIONAL MEMORANDUM
VIRGINIA DEPARTMENT OF TRANSPORTATION TRAFFIC ENGINEERING DIVISION INSTRUCTIONAL & INFORMATIONAL MEMORANDUM GENERAL SUBJECT: Barrier Systems SPECIFIC SUBJECT: Guardrail System Spot Repair Condition Ratings
TEMPORARY DESIGN GUIDANCE FOR GUARDRAIL
TEMPORARY DESIGN GUIDANCE FOR GUARDRAIL Note: These temporary guidelines have been written in attempt to cover questions that may arise with moving towards use of the Midwest Guardrail System and the Manual
TESTING OF M203x9.7 (M8x6.5) AND. S76x8.5 (S3x5.7) STEEL POSTS - POST COMPARISION STUDY FOR THE CABLE MEDIAN BARRIER
TESTING OF M3x9.7 (Mx.) AND S7x. (S3x.7) STEEL POSTS - POST COMPARISION STUDY FOR THE CABLE MEDIAN BARRIER Submitted by Beau D. Kuipers, B.S.M.E., E.I.T. Graduate Research Assistant John D. Reid, Ph.D.
Numerical simulation of single- and doublefaced W-beam guardrails under vehicular impacts on six-lane divided freeways
Surface Effects and Contact Mechanics XI 49 Numerical simulation of single- and doublefaced W-beam guardrails under vehicular impacts on six-lane divided freeways H. Fang 1, N. Li 1, M. Gutowski 1, M.
Guardrail Design. Licking County Engineer s Office April 16, 2014
Roadside Design Guardrail Design Licking County Engineer s Office April 16, 2014 Roadside Design National Roadside Fatalities (Most Harmful Event) Other 20% Trees 50% Barriers 8% Utility Embankment and
VALIDATION OF FINITE ELEMENT MODELS OF INJURY RISK IN VEHICLE-ROADSIDE BARRIER CRASHES
VALIDATION OF FINITE ELEMENT MODELS OF INJURY RISK IN VEHICLE-ROADSIDE BARRIER CRASHES Qian Wang, Hampton C. Gabler Virginia Tech-Wake Forest, Center for Injury Biomechanics Blacksburg, VA 24061 ABSTRACT
ENGINEERING DIVISION
VIRGINIA DEPARTMENT OF TRANSPORTATION GENERAL SUBJECT: BARRIER SYSTEMS SPECIFIC SUBJECT: TRAFFIC ENGINEERING DIVISION MEMORANDUM GUARDRAIL SYSTEM SPOT REPAIR Damage Condition Ratings and Repair Strategies
Pole Mounting System Installation & Certification Manual
Pole Mounting System Installation & Certification Manual IronRidge Pole Mount Installation Guide... 2 IronRidge Certification Letter... 11 IronRidge Wet Stamped Drawing... 12 www.ironridge.com 800-227-9523
IMPROVEMENTS TO THE WEAK-POST W-BEAM GUARDRAIL
Paper No. 01-2282 IMPROVEMENTS TO THE WEAK-POST W-BEAM GUARDRAIL by Malcolm H. Ray Associate Professor Worcester Polytechnic Institute Klas Engstrand Graduate Research Assistant Worcester Polytechnic Institute
STATE OF KANSAS DEPARTMENT OF TRANSPORTATION PLAN AND PROFILE OF PROPOSED. Sta Br. No (011) 50'-70'-50' R.D.G.H.
OF 36-74 KA-483-0 08 INDEX OF DEPARTMENT OF TRANSPORTATION 3 TITLE SHEET TYPICAL SECTIONS PLAN SHEET & GENERAL NOTE PLAN AND PROFILE OF PROPOSED GUARDRAIL 4 5-0 GUARDRAIL LAYOUT GUARDRAIL STANDARDS SUMMARY
CHAPTER 10 ROADSIDE SAFETY
CHAPTER 10 ROADSIDE SAFETY Introduction 10-4 Clear Zone 10-4 Figure 10-1 Recovery Area and Clear Zone Examples Table 10-1 Clear Zone for 3R Projects on National Highway System Table 10-2 Clear Zone for
Pole Mounting System Installation & Certification Manual
Pole Mounting System Installation & Certification Manual IronRidge Pole Mount Installation Guide... 2 IronRidge Certification Letter... 17 IronRidge Wet Stamped Drawing... 18 IronRidge Foundation Addendum...
Town of Weston Guardrail Overview Report
Town of Weston Guardrail Overview Report July 28, 2016 Prepared for: Town of Weston Weston, MA 02493 Submitted by: Nitsch Engineering 2 Center Plaza, Suite 430 Boston, MA 02108 Nitsch Engineering Project
CHAPTER 14: GUARDRAIL and BARRIERS
CHAPTER 14: GUARDRAIL and BARRIERS If you have any questions regarding guardrail, end treatments and/or pay items included in your plan, please contact the Project Design Services Unit or the Design Standards
Column headings match the SEQ descriptions Both ends of guardrail accounted for All notes accounted for and make sense SP/funding splits shown
GUARDRAIL GUARDRAIL - TABS Column headings match the SEQ descriptions Both ends of guardrail accounted for All notes accounted for and make sense SP/funding splits shown TRAFFIC BARRIER REMOVE SALVAGE
LEGEND: ROOMS ROOMS ACMV OVERHAUL HANGER LAYOUT FOR 202&203 SECOND MEZZANINE FLOOR TYPICAL FRONT ELEVATION FOR HIGHWALL MOUNTED INDOOR UNIT
GF-LVAU-05 GF-LVAU-04 GF-EVAU-03 Ref. piping to above TYPICAL FRONT ELEVATION FOR HIGHWALL MOUNTED INDOOR UNIT REF. PIPE (LL & SL) REF. PIPES & DRAIN PIPE WALL CONCEALED DRAIN PIPE ROOMS ROOMS CONNECTED
APPENDIX I SECTION I-1-INTRODUCTION... I-1
APPENDIX I SECTION I-1-INTRODUCTION... I-1 SECTION I-2- BARRIER SYSTEMS AND TERMINALS... I-2 W-Beam Guardrail General Criteria... I-2 GR-10 Guardrail over Culvert in Low Fills... I-4 High Tension Cable...
Parts List. Modular Flaker F-1501MAH(-C) F-1501MWH(-C) F-1501MRH(-C) hoshizakiamerica.com
Parts List Modular Flaker F-1501MAH(-C) F-1501MWH(-C) F-1501MRH(-C) hoshizakiamerica.com Number: 71353 Issued: 7-9-2014 Revised: 12-14-2017 CONTENTS Note About Ordering Parts... 3 A. Main Assembly & Refrigeration
Parts List. Modular Flaker. Models FD-1001MAJ-C, MRJ-C. hoshizakiamerica.com
Parts List Modular Flaker Models FD-1001MAJ-C, MRJ-C hoshizakiamerica.com Number: 71356 Issued: 8-28-2014 Revised: 8-14-2017 CONTENTS Note About Ordering Parts... 3 A. Main Assembly & Refrigeration Circuit...
391 WEST WATER STREET TAUNTON, MA P: F:
391 WEST WATER STREET TAUNTON, MA 02780 WWW.QUICK-SLING.COM INFO@QUICK-SLING.COM P: 1.800.699.0453 F: 1.800.699.0423 QUICK-SLING MINI-SPLIT STANDS QSMS1200 QSMS1201 QSMS1800 QSMS1801 QSMS2400 QSMS2401
DESIGN SCENE SUBJECT INDEX
DESIGN SCENE SUBJECT INDEX CHAPTER 1: TITLE SHEET and GENERAL LAYOUT AREA OF ENVIRONMENTAL SENSITIVITY BRIDGE & APPROACH PLANS CONSTRUCTION PLAN FOR EXCEPTIONS EXCEPTION CLARIFICATION GOVERNING SPECIFICATIONS
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Trailer Assembly 01 190331 Frame Assembly w/plugs 02 180741 Bracket, Axle, Trailer 03 180751 Axle, Trailer 04 180641 Washer,.8" ID, 1.5"
GUARDRAIL REPLACEMENT HIGHWAY SAFETY PROGRAM. prepared by. Michael R. Monnig SAFETY ENGINEER
M S- S{;c; GUARDRAIL REPLACEMENT HIGHWAY SAFETY PROGRAM prepared by Michael R. Monnig SAFETY ENGINEER Highway Safety Engineering Section Maintenance Operations Division Texas State Department of Highways
1SC. Instructions for HORIZONTAL 43 to 54 TV Mounting Bracket
Instructions for HORIZONTAL 43 to 54 TV Mounting Bracket Wall mount your speakers securely enough that they cannot fall and cause personal injury or damage to property. Paradigm DOES NOT supply hardware
40-INCH FREE- STANDING ELECTRIC RANGE LE. Model No. FEF450B D2015
Product No. 38154535D2015 Series 40" f/s elec Color white Market North America Wiring Diagram 318045323 Owner's Guide 318200706 Installation Instructions 318200870 Service Data Sheet 318202603 Timer Guide
Homestyle Stacked Washer/ Dryer
Homestyle Stacked Washer/ Dryer Parts Refer to Page 3 for Model Numbers SWD441C_801998 www.alliancelaundry.com Part No. 801998R6 January 2018 Table of Contents Title Page Parts Ordering Information...
Parts List. Modular Flaker. Models FD-1002MAJ-C, MRJ-C. hoshizakiamerica.com
Parts List Modular Flaker Models FD-1002MAJ-C, MRJ-C hoshizakiamerica.com Number: 71372 Issued: 8-14-2017 CONTENTS Note About Ordering Parts... 3 A. Main Assembly & Refrigeration Circuit... 4 FD-1002MAJ-C...
MDT6N SERVICE PARTS TABLE OF CONTENTS. Cabinet PAGE 2. Hopper PAGE 3. Sink PAGE 4. Ice Chute and Dispensing PAGE 5. Air Cooled Refrigeration PAGE 6
This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine needing parts to be sure that this is the correct parts list. There have been several
Parts List. Modular Flaker. Models F-2001MWH F-2001MRH(3)(-C) F-2001MLH. hoshizakiamerica.com
Parts List Modular Flaker Models F-2001MWH F-2001MRH(3)(-C) F-2001MLH hoshizakiamerica.com Number: 71354 Issued: 7-11-2014 Revised: 3-28-2018 CONTENTS Note About Ordering Parts... 3 A. Main Assembly &
MacroAir AirVolution HVLS Fans
Manufacturer: MacroAir Technologies, Inc. 794 South Allen Street San Bernardino, CA 92408-2210 macroairfans.com SECTION 15830 INDUSTRIAL/COMMERCIAL CEILING FANS PART 1 GENERAL MacroAir AirVolution HVLS
Creating Complete Roadway Corridors:
Creating Complete Roadway Corridors: The AASHTO Guide to Transportation Landscape Architecture and Environmental Design NCHRP Project 15-33 Status Report AASHTO Standing Committee on Design Technical Committee
CURRICULUM VITAE. James J. Valenta, PE, MSCE, FITE 8463 Shield Road Dexter, MI (734)
CURRICULUM VITAE James J. Valenta, PE, MSCE, FITE 8463 Shield Road Dexter, MI 48130 (734) 904-2652 Email: jvalenta@prodigy.net Areas of Expertise: Roadway Hydroplaning Analysis, Guardrail, Highway Design,
UMA-1020 Light Weight Suspended Ceiling Kit
INSTALLATION INSTRUCTIONS UMA-1020 Light Weight Suspended Ceiling Kit The provides a sturdy support for LCD/DLP hanging brackets (and certain other products weighing less than 50 pounds) when installing
Statistical In-Service Safety Performance Evaluation of Guardrail End Treatments
Statistical In-Service Safety Performance Evaluation of Guardrail End Treatments Research Report For Wisconsin Department of Transportation Madhav V. Chitturi, Ph.D. William Bremer Kelvin R. Santiago-Chaparro
KAIGA GENERATING STATION
KAIGA GENERATING STATION Plant Site, PO-Kaiga, Uttara Kannada District Pin: 581400, Karnataka. Ph. : 08382-264141/264001/264042 Tender Reference No. : - CMM/KAIGA 1-4/ KGS1-4/ 53166 Item Name: - HARDWARE
TS-49 PART # DPEC DATE: REVISED:
36-6022 COMPACT PORTABLE TABLE SAW - w/mobile STAND 38 73 325 176 x2 x4 x2 324 326 323 x2 P1 36-6022 COMPACT PORTABLE TABLE SAW - w/mobile STAND 116 191 P2 36-6022 COMPACT PORTABLE TABLE SAW - w/mobile
CG Section and Base Assembly Series 1 through 12
GAS CG Section and Base Assembly Series through 2 5 3 2 2 3 4 9 6 8 0 8B 0A 7 22 Discontinued Service Parts CG Section and Base Assembly Series through 2 GAS Fig. No. Part No. Description Series No. 3-03-85
WASATCH HOLLOW PRESERVE PHASE II RIPARIAN RESTORATION JOB NO
WASATCH HOLLOW JOB NO. 231504 SHEET SET ASSEMBLY ORDER VICINITY MAP OWNER DEPARTMENT OF: COMMUNITY AND ECONOMIC DEVELOPMENT DIVISION DIRECTOR - MARY DELAMARE SCHAEFER CITY ENGINEER - JEFF SNELLING, S.E.
Part Lists & Exploded Views
UC-B DOOR VIEW PARTS LIST Ref # Part # Description 1 350 Closer, Door 150Lb 0070 Screw, #- x 1/" PH Hex Washer 3 0070 Screw, #- x 1/" PH Hex Washer 351111 Hinge, Cabinet Bottom- Black 35111 Hinge, Cabinet
GAS/OIL. 78 Section Assembly. 152 Discontinued Service Parts
78 Section Assembly 152 Discontinued Service Parts 78 Section Assembly Part Description Mfr. s Part A 315700059 FRONT SECTION 80 P. S. I. 7813 315700120 INTERMEDIATE SECTION, REGULAR 80 P.S. I. 7815 B
Connecting the DOTs: Nationwide Trends in the Inventory, Evaluation, and Management of Historic Roads
Connecting the DOTs: Nationwide Trends in the Inventory, Evaluation, and Management of Historic Roads In 2013-2014 Mead & Hunt, Inc. surveyed state Departments of Transportation (DOTs) on how they address
W-BEAM BACKED GUARDRAIL W-BEAM BACKED GUARDRAIL AND GUARDRAIL LONG SPAN INSTALLATIONS AND GUARDRAIL LONG SPAN INSTALLATIONS
* SEE STANDARD PLAN R-6-SERIES FOR POST SPAING AND GUARDRAIL LAYOUT TO FROM TO GUARDRAIL APPROAH TERMINAL, TYPE 1 OR GUARDRAIL APPROAH TERMINAL, TYPE 2. SEE POST PLAEMENT DETAIL 2'- 5 4 3 2 1 1 2 3 4 5
(Toll Free); 7am-7pm Pacific Time, Monday-Saturday. Assembly instructions for: DUSTIN S FACE TO FACE GLIDERS WITH XW ROOF
866.332.2403 (Toll Free); 7am-7pm Pacific Time, Monday-Saturday Assembly instructions for: DUSTIN S FACE TO FACE GLIDERS WITH XW ROOF FRAME QUANTITY DRAWING 2 Structure Supports 2 Supports 1 Base support
Spare Parts List (Kits) Model Ref.:- HM35 SERIES A Spare Parts List (Kits) Issue 8 Dated 10-February-2015 Reference Drawing 09-1108-0000 Issue B Dated 07-January 2014 Drawing Ref. Part Number DESCRIPTION
CORPRATE OFFICE 5257 NE MARTIN LUTHER KING JR. BLVD, SUITE 202 PORTLAND, OREGON USA
COMPANY PROFILE CORPRATE OFFICE 5257 NE MARTIN LUTHER KING JR. BLVD, SUITE 202 PORTLAND, OREGON 97211 USA 800-673-0478 info@vippipe.com VIP INDSTRIAL SUPPLY, LLC TYPE OF PROPRIETORSHIP: USA LLC CORPORATION
MLG35 Parts Manual Phase 8
MLG35 Parts Manual Phase 8 For Internal Use Only RETAIN THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE Whirlpool Corporation Commercial Laundry Benton Harbor, MI 49022 1-800-662-3587 Part No.
Standard Specification for Hardened Steel Washers [Metric] 1
![Standard Specification for Hardened Steel Washers [Metric] 1](/thumbs/77/74974858.jpg "Standard Specification for Hardened Steel Washers [Metric] 1")
Designation: F 436M 93 (Reapproved 2000) METRIC Standard Specification for Hardened Steel Washers [Metric] 1 This standard is issued under the fixed designation F 436M; the number immediately following
Pole Mounting System Installation & Certification Manual
Pole Mounting System Installation & Certification Manual IronRidge Pole Mount Installation Guide... 2 IronRidge Certification Letter... 14 IronRidge Wet Stamped Drawing... 15 IronRidge Foundation Addendum...
Installation Manual Universal Top-of-Pole Mount UNI-TP/02
Installation Manual Universal Top-of-Pole Mount UNI-TP/02 Solar Mounting Solutions UNI-TP/02 April 2008 www.ironridge.com 2008 IronRidge, Inc. All Rights Reserved Version 1.0 2 Universal Top-of-Pole Mount
McDONALD S 30 ROOF ELEMENT
29-10 7/16 PRE-DRILLED HOLES IN LEGS 4-8 15/16 1-7 1/4 MCDO BRACKET 1-7 1/4 RIVNUT NALDS BRACKET 10-8 2 1-7 1/4 = DISTANCE FROM BOTTOM OF BASE PLATE TO CENTER OF TIE-BACK ASSEMBLY C L 22 1/16" FROM WALL
M50SL / M75SL Parts Manual
M50SL / M75SL Parts Manual American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com www.amdry.com ADC Part No.
GUARDRAIL. Project Design Services Unit September
GUARDRAIL Project Design Services Unit September 2018 http://ihub/projectdelivery/design/index.html GUARDRAIL If you EVER have any questions regarding guardrail, end treatments and/or pay items please
Standard Specification for Hardened Steel Washers [Metric] 1
![Standard Specification for Hardened Steel Washers [Metric] 1](/thumbs/84/89510336.jpg "Standard Specification for Hardened Steel Washers [Metric] 1")
Designation: F 436M 03 METRIC Standard Specification for Hardened Steel Washers [Metric] 1 This standard is issued under the fixed designation F 436M; the number immediately following the designation indicates
36"x17" Portable Tool Chest and 6-Drawer Tool Cabinet
36"x17" Portable Tool Chest and 6-Drawer Tool Cabinet CHEST 24571 CABINET 24572 CAUTION: 1. Read and follow all safety information and instructions before using this product for the first time. 2. Fill
Homestyle Stacked Washer/Dryer
Homestyle Stacked Washer/Dryer Parts Refer to Page 3 for Model Numbers SWD443C_801802 www.alliancelaundry.com Part No. 801802R8 January 2018 Table of Contents Title Page Parts Ordering Information...
PennDOT. single spann lanes and 3- mayy need to be to accommodate. any bridge. addition to III. Date: CRP 07/27/2015 CRP.
(10/27/14) PennDOT Section 106 Field Assessments and Finding Combined Early tification/finding? Yes Concurrence required or requested: Yes MPMS: 51507 ER# (if consultation with PHMC required) ): County:
Deluxe Welding Tool Chest
Deluxe Welding Tool Chest Item# 9002166 OPERATOR S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety
24. Exhaust Fan. 2. ½ NPT Brass nut. 1. Brass Elbow. 4. Speaker. 6. Rain Shower head. 5. White LED Light. 16. Flex Drain Assembly
1. Brass Elbow 2. ½ NPT Brass nut 4. Speaker 5. White LED Light 6. Rain Shower head 12. Steamer Cleaning Port 13. Massage Jet 14. Foldable Seat 16. Flex Drain Assembly 22. Door Handles 24. Exhaust Fan
Global-Tek (Singapore) Pte Ltd
Global-Tek (Singapore) Pte Ltd Door Type G-TEK G-TEK WWW.GLOBAL-TEK.COM.SG 1 P a g e Door Type, CONTENTS Wash and Rinse Arm Assembly....... 3-4 Booster Heater... 5-6 Wash Chamber.. 7-8 Door Lift Assembly...9-10
Hoshizaki America, Inc.
Hoshizaki America, Inc. Professional Series Refrigerated Kitchen Equipment Models FH-SSB(-HD) A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 0 Issued: -8-999 Revised: 9-9-0 CONTENTS
MK-100 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-00 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space
Parts List. Professional Series Refrigerated Kitchen Equipment. Models FH2-SSB(-HD) hoshizakiamerica.com
Parts List Professional Series Refrigerated Kitchen Equipment Models FH-SSB(-HD) hoshizakiamerica.com Number: 0 Issued: -8-999 Revised: --0 CONTENTS Auxiliary Codes... Note About Ordering Parts... A. Main
Won-Door FireGuard T H E P E R F E C T F I T I N A V A R I E T Y O F A P P L I C A T I O N S
Won-Door FireGuard T H E P E R F E C T F I T I N A V A R I E T Y O F A P P L I C A T I O N S Fire Safety By Design O N L Y T H E W O N - D O O R F I R E G U A R D C A N cover wide spans* heights up to
OWNER S MANUAL IMPORTANT: READ OWNER S MANUAL CAREFULLY
Floor Burnisher OWNER S MANUAL IMPORTANT: READ OWNER S MANUAL CAREFULLY Please fill out and return your warranty card MODEL 261120 031811 TABLE OF CONTENTS CONGRATULATIONS on your purchase of a Global
Installation Manual Universal Side-of-Pole Mount UNI-SP/02A
Installation Manual Universal Side-of-Pole Mount UNI-SP/02A Solar Mounting Solutions UNI-SP/02A September 2009 www.ironridge.com 2009 IronRidge, Inc. All Rights Reserved Version 2.1 2 Universal Side-of-Pole
CU1526, CU2026, CU3030 Service Parts
This is the illustrated list of service parts for all models of the CU, CU0 and CU00 self contained ice machines. These machines were manufactured in several voltages, which is designated by a numeric
INSTALLATION, OPERATION, SERVICE & PARTS SUPPLEMENT for
T-333 Manual INSTALLATION, OPERATION, SERVICE & PARTS SUPPLEMENT for Rooftop Energy Storage Systems (ESS) AIR COOLING UNIT 77-62186-00 THRU -04 & 77-62203-00 T-333 REV. 03/2012 2012 Mobile Climate Control
SERVICE PARTS LIST for
T-0PL Manual SERVICE PARTS LIST for MODELS AC0 & AC0 With BT Digital Display or 80P/8P Electronic Thermostat T-0PL REV. 06/0 0 Mobile Climate Control TABLE OF CONTENTS TABLE OF CONTENTS... i CONDENSER
ML-175 Parts Manual. Phase 7
ML-175 Parts Manual Phase 7 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com www.amdry.com ADC Part No.
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Trailer Assembly 01 180721 Frame Assembly 02 188671 Bushing, 1.02" ID x 1.25" OD x.75l 03 188781 Support, Axle, 1" 04 188381 Plate, Axle
Hardware Kits and Specifications for RBEF, RBSF, RBEA, RBSA, RDEF, RDSF, RDEA, RDSA Resistors
Hardware Kits and Specifications for RBEF, RBSF, RBEA, RBSA, RDEF, RDSF, RDEA, RDSA Resistors RBEF, RBSF datasheet: www.vishay.com/doc?807 RBEA, RBSA datasheet: www.vishay.com/doc?809 RDEF, RDSF datasheet:
Continuous Flow Dryer Assembly Manual
Continuous Flow Dryer Assembly Manual Dryer Assembly Manual Sukup Manufacturing Company 1555-255th Street P.O. Box 677 Sheffield, Iowa 50475 Phone 641 892 4222 Fax 641 892 4629 Table of Contents Table
Hoshizaki America, Inc.
Hoshizaki America, Inc. Commercial Series Refrigerated Kitchen Equipment Models CRA-FS CRA-HS CFA-FS CFA-HS A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71309 Issued: 7-1-011 CONTENTS
SCC 201E Valid as of E21SE0404 up to E21SE... SCC 201E
Electrical unit Voltage 3 NAC 400V 50-60Hz 1 1 Control panel 2 2 Electrical installation 3 3 Clima Plus 4 4 Steam generator, Bypass 5 5 Hot air heating 6 6 Motor and fan wheel 7 7 Interior cabinet 8 8
MK-2000 GAS SERIES MASONRY SAW
www.mkdiamond.com MK-000 GAS SERIES MASONRY SAW Parts List MODELS part # MK-00H MK-00V MK-00K MK-00G Revision 0 0.0 Manual Part No. 0-PM Caution: Read all safety and operating instructions before using
2 Drawer Vehicle Storage System
2 Drawer Vehicle Storage System Part No 51000 Installation: Includes: Mounting Kit: 4 x bolts 4 x washers 4 x locking nuts 1 Remove right hand side top section by undoing the 10 retaining screws and set
MacroAir by Blue Giant AirVolution HVLS Fans
Manufacturer: MacroAir Technologies, Inc. 794 South Allen Street San Bernardino, CA 92408-2210 Macroairfans.com SECTION 15830 INDUSTRIAL/COMMERCIAL CEILING FANS PART 1 GENERAL MacroAir by Blue Giant AirVolution
Juna Ceiling Fan JU54. Installation Instructions Instrucciones de instalación Instructions d installation
Juna Ceiling Fan JU54 Installation Instructions Instrucciones de instalación Instructions d installation Read and Save These Safety Precautions. Turn off electricity at main switch before wiring or servicing
VFA6-HD TOLERANCE NOTES CEK 1/25/2017 VFA6-HD CUSTOMER BMC 12/13/2017 6' HEAVY DUTY V-FRAME ASSEMBLY WITH TWO STIFF ARMS 1 OF 5 PARTS LIST
ITEM 6 7 9 0 6 7 9 0 6 7 9 6 QTY 70 7 6 X-VFAW X-HDCAMTBW X-MHTPHD X-VFAPL X-LCBP X-HDCAMSS X-SPTB X-HDCAMSP X-TBCA SC MCP DCP P P6 A GFW GLW GNUT GR- GR- GR- X-UB0 X-UB G07 G06 G0 A G0 GFW GLW GNUT X-UB0
OP44-1 REV 2: Removed depiction of air intake hole in the CB-907A Right Aft Case Baffle.
REVISION DESCRIPTION: OP44-1 REV 2: Removed depiction of air intake hole in the CB-907A Right Aft Case Baffle. OP44-4 REV 1: Steps rewritten to describe the air intake hole on the CB-907A Right Aft Case
Original Contract Amount $ 754, Change Order #1 $ 129, New Contract Amount $ 883, New Contract, Compared to Original 117.
Agenda Item: 9. MEMORANDUM TO: Programs, Projects, and Operations Subcommittee FROM: Eric Williams, Natural Resources Planner SUBJECT: Hell Creek Grade Control Stabilization, Change Order 1 DATE: August
COMMERCIAL ELECTRIC DRYER MODELS: MLE26PDBZW1 (White) 01/14/ Maytag Part No. W Rev. A
COMMERCIAL ELECTRIC DRYER MODELS: MLE26PDBZW1 (White) 01/14/2016 2016 Maytag Part W10856858 Rev. A CONTROL PANEL AND SEPARATOR PARTS 01/14/2016 2 Part W10856858 Rev. A CONTROL PANEL AND SEPARATOR PARTS
CND Committee Meeting April 10, 2018
CND Committee Meeting April 10, 2018 Projects must: Serve a public purpose/benefit Have a detailed budget reflecting accurate project costs and match sources Have a detailed and achievable timeline including
Pole Mounting System Installation & Certification Manual
Pole Mounting System Installation & Certification Manual IronRidge Pole Mount Installation Guide... 2 IronRidge Certification Letter... 14 IronRidge Wet Stamped Drawing... 15 IronRidge Foundation Addendum...
TRW-17 READ PRIOR TO UNPACKAGING COMPONENTS
Rotary Woofer Setup & Installation Guide for the Eminent Technology Model TRW-17 READ PRIOR TO UNPACKAGING COMPONENTS Contents: 1) Removing Rotary Woofer Stand (optional) from Shipping Crate 2) Removing
CHAPTER 21 AIR CONDITIONING
FBA-C, FBA-C FBA-C3, FBA-C CHAPTER AIR CONDITIONING -00 Page July, 0 FBA-C, FBA-C FBA-C3, FBA-C List of Effective Pages Chapter / Section Page No. Date Chapter / Section Page No. Date -00 Jul, 0 Jul, 0-0
99105A Series - F Brush Lift Assembly Model :99105A 20" EZ BD Floorkeeper (w/ 2-12 V Batteries) - Series F
9905A Series - F Brush Lift Assembly Model :9905A 0" EZ BD Floorkeeper (w/ - V Batteries) - Series F Page- 5 7 8 9 5 7 8 0 5 7 8 9 0 5 7 8 9 0 0589 NUT, LOCK W/ LOCTITE 070 RING, RETAINING 0 WASHER, PLAIN
Illustrated Parts List REFRIGERATED BACK COUNTER. Duke Manufacturing Company. MODEL: RBC 48 RBC 60 (Ending Serial # , Built 3/24/2017)
Illustrated Parts List RBC 60 RBC 48 REFRIGERATED BACK COUNTER MODEL: RBC 48 RBC 60 (Ending Serial # 03172774, Built 3/24/2017) This manual is Copyright 2018 Duke Manufacturing Co. All rights reserved.
Thanks for shopping with Improvements! Deluxe Ironing Center Item #567719
Thanks for shopping with Improvements! Deluxe Ironing Center Item #567719 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean, smooth
Important Instructions
Important Instructions Subject: Installing Elevated Base Pedestal on Frontload Washers and Dryers Use With: PDR08W, PDR08B, PDR08U, PDR08G, PDR08D, PDC06B, PDC08B, PDC0B, PDCB Elevated Base Pedestals This
wholesalesolar.com Table of Contents 1. Racking Layout Options (page 2-3) 2. IronRidge Roof Mounting System (page 4-12)
wholesalesolar.com Table of Contents 1. Racking Layout Options (page 2-3) 2. IronRidge Roof Mounting System (page 4-12) 3. WEEB Installation Instructions (page 13-24) Page 1 RACKING LAYOUT OPTIONS MID
COMMERCIAL ELECTRIC DRYER MODELS: MLE27PDBYW1 (White) 01/19/ Maytag Part No. W Rev. A
COMMERCIAL ELECTRIC DRYER MODELS: MLE27PDBYW1 (White) 01/19/2016 2016 Maytag Part W10856883 Rev. A CONTROL PANEL AND SEPARATOR PARTS 01/19/2016 2 Part W10856883 Rev. A CONTROL PANEL AND SEPARATOR PARTS
CBUCK Engineering. Evaluation Report. Solar Attic Fans Self-Flashing Series
Evaluation Report Solar Attic Fans Self-Flashing Series with Low Profile Remote Mounted Solar Panel 20 Watts, 30 Watts & 40 Watts Solar Panels Manufacturer 1370 FM 116 Gatesville, Texas 76528 (877) 288-4234
GV Series 4 Section Assembly
GV Series 4 Section Assembly 192 Current Service Parts GV Series 4 Section Assembly Fig. No. Part No. Description Size Notes 1 322-200-280 Section Assembly, GV-3 (Repair Kit Required) 3 1 322-200-281 Section