NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date

Transcription

1 NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date 10/1005/CD IEC Ed.3: Insulating liquids - Determination of the breakdown voltage at power frequency 13/1718/CD IEC Ed. 2.0, Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment 13/1719/CD IEC Ed. 2.0, Electricity metering equipment - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) 13/1720/CD IEC Ed. 2.0, Electricity metering equipment - Particular requirements - Part 22: Static meters for active energy (classes 0,1 S, 0,2 S and 0,5 S) 13/1722/CD IEC Ed. 2.0 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) 13/1724/CD IEC Ed. 2.0 Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for fundamental component reactive energy (classes 0,5 S, 1 S and 1) 18/1554/CD IEC : Electrical installations in ships - Part 401: Installation and test of completed installation 18/1555/CD IEC/IEEE : Subsea equipment - Power connectors, penetrators and jumper assemblies with rated voltage from 3 kv (Umax = 3,6 kv) to 30 kv (Umax = 36 kv) 23E/978A/CDV IEC Ed.1: Requirements for Automatic Reclosing Devices (ARDs) for circuit-breakers, RCBOs, RCCBs for household and similar uses 34A/1931/CDV Amendment 2 to IEC Ed.3: Lamps for road vehicles - Dimensional, electrical and luminous requirements 34A/1933/CDV IEC Ed.5: Lamps, light sources and LED packages for road vehicles - Performance requirements 47A/995/CD IEC Ed.1: Integrated Circuits - EMC evaluation of transceivers - Part 1: General conditions and definitions 51/1150/FDIS IEC Ed.2: Inductive components - Reliability management 62D/1384/CDV IEC : Dedical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment 62D/1385/CDV IEC : Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment 62D/1415F/CDV 64/2146/CD IEC : Low-voltage electrical installations - Part 7-710: Requirements for special installations or locations - Medical locations 65/645/PAS IEC PAS Ed1: Smart Manufacturing - Reference Architecture Model Industry 4.0 (RAMI4.0) /612/FDIS Amendment 1 to IEC Ed.3: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements 66/613/FDIS IEC Ed.2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits Page 1 of 6

2 66/614/FDIS IEC Ed.1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength 69/460/CD IEC Ed 2.0: ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging 69/461/CD IEC Ed 2.0: ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - Part 23: DC electric vehicle supply equipment 77A/934/CDV IEC (f4): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current? 16 A per phase) 77A/935/CDV IEC (f3): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current? 16 A per phase) 82/1185/FDIS IEC Ed.1: Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability 85/555/CDV IEC : Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters 85/556/CDV IEC : Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters 85/557/CDV IEC : Direct acting indicating analogue electrical measuring instruments and their accessories - Part 4: Special requirements for frequency meters 85/558/CDV IEC : Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes 85/559/CDV IEC : Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special Requirements for Ohmmeters (Impedance Meters) and Conductance Meters 85/560/CDV IEC : Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments 85/561/CDV IEC : Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for multi-function instruments 86A/1767/FDIS IEC /Ed4: Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance 88/603/CD IEC Ed.2: Wind energy generation systems - Part 27-1: Electrical simulation models - Generic models 88/604/CD IEC Ed.1: Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation 88/606/FDIS IEC Ed.2: Wind power generation systems - Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring 91/1386/CDV IEC Ed.3: Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies 100/2762/CDV IEC Ed. 1.0: Wireless Power Transfer - Management - Part 2: Multiple devices control management (TA15) 101/517/CDV IEC Ed.2: Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear 101/518/CDV IEC Ed.2: Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person Page 2 of 6

3 101/521/FDIS IEC Ed.2: Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization 104/718/CD Amendment 1 to IEC Ed.2: Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance CIS/A/1181/CDV Amendment 2 to CISPR (f4): Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty 17A/1125/CDV IEC Ed.4: High-voltage switchgear and controlgear - Part 110: Inductive load switching 18/1554A/CD IEC : Electrical installations in ships - Part 401: Installation and test of completed installation /1555A/CD IEC/IEEE : Subsea equipment - Power connectors, penetrators and jumper assemblies with rated voltage from kv (Umax = 3,6 kv) to 30 kv (Umax = 36 kv) 18/1556/CD IEC 62742: Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a nonmetallic hull 21/902/CD IEC : Safety requirements for secondary batteries and battery installations - Part 5: lithium-ion batteries for traction applications 21/903/CD IEC : Safety requirements for secondary batteries and battery installations - Part 5: lithium-ion batteries for stationary applications 21A/610/FDIS IEC 60623: Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechageable single cells 34C/1247/CDV IEC Ed.1: Digital addressable lighting interface - Part 332: Particular requirements - Input control devices - Feedback 46F/359/CD IEC : Ed 1.0!: RADIO-FREQUENCY CONNECTORS -Part 60: Sectional specification for series SMPM RF coaxial connectors 47E/559/CD IEC Ed.2: Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers 47F/254/CDV IEC Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 30: Measurement methods of electro-mechanical conversion characteristics of MEMS piezoelectric thin film 51/1151/CD IEC/TR Ed.1: Dimensinal tolerance of ferrite cores /1153/CD IEC Ed.3: High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor 61D/348/CDV IEC /F1/Ed 6 Household and similar electrical appliances Safety Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers 61D/350/CDV IEC /F2/Ed 6 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers 61D/351/CDV IEC /F3/Ed 6 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers 64/2147/FDIS Amendment 1 to IEC : Low voltage electrical installation - Part 4-41: Protection for safety - Protection against electric shock 76/558/CD IEC TR : Photobiological Safety of Lamps and Lamp Systems: Measuring Methods B/766/CD IEC Electromagnetic compatibility (EMC) - Part 4-20 : Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides 82/1188/DTS IEC TS Ed.1: Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 3: Outdoor infrared thermography of photovoltaic modules and plants Page 3 of 6

4 82/1189/DTS IEC TS Ed.1: Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials used for frontsheets and backsheets 82/1190/CD IEC Ed.1: Testing of PV modules to differentiate performance in multiple climates and applications - Part 3: Test procedure for encapsulant transmittance 86B/4011A/CDV IEC /Ed1 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows 86B/4036/CD IEC /Ed3 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family 86B/4038/CD IEC /Ed3: Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family CIS/A/1194/FDIS Amendment 2 to CISPR : Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements CIS/A/1195/FDIS Amendment 1 to CISPR : Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration CIS/H/311A/CDV Amendment 2 to IEC Ed.2: Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments 1/2316/FDIS IEC : International electrotechnical vocabulary - Part 811: Electric traction /2317/FDIS IEC : International electrotechnical vocabulary - Part 821: Signalling and security apparatus for railways /2318/CD IEC Ed. 1.0: International Electrotechnical Vocabulary. Part 171: Digital technology - Fundamental concepts 9/2190A/CDV IEC Ed.1: Railway applications - Rolling stock equipment - Onboard lithium-ion traction batteries 21A/611/CD IEC : Secondary cells and batteries containing alkaline or other non-acid electrolytes - Part 4 - Coin type secondary lithium cells and batteries 40/2481/CDV IEC Ed.3: Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes 40/2502/DTR IEC/TR Ed.1: Study for the derating curve of surface mount fixed resistors - Derating curves based on terminal part temperature 45/817/CD IEC Ed.1: Nuclear instrumentation - Data format for list-mode digital data acquisition used in radiation detection and measurement 46C/1060/CD IEC : MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - Part 11: Cables for 1 Gb/s over one pair - Sectional specification 47/2321/CDV IEC Ed.1: Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors 47/2325/CD IEC Ed.1:Semiconductor devices - mechanical and climatic test methods - Part 41: Reliability testing methods of non-volatile memory devices 47A/996/CD IEC Ed.1: Integrated circuits - Three dimensional integrated circuits - Part 1: General conditions and definitions 47A/997/CD IEC Ed.1: Integrated circuits - Three dimensional integrated circuits - Part 3: A model and measurement conditions of through silicon via Page 4 of 6

5 47F/266/FDIS IEC Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 28: Performance testing method of vibration-driven MEMS electret energy harvesting devices 55/1587/CD IEC /Ed1: Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class /1588/CD IEC /Ed1: Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class /665/CD IEC Ed.3: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values 59/666/DTS IEC TS Ed.1: Household and similar electrical appliances - Specifying smart capabilities of appliances and devices - General aspects 61B/576/CD IEC /A1/Ed1: Household and similar electrical appliances - Safety - Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators 61B/577/CD IEC /f2/Ed7: Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens 61B/578/CD IEC /f3/Ed7: Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens 61B/579/CD IEC /f4/Ed7: Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens 61B/580/CD IEC A1-f2 Ed 4.0: Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens 77A/936/CDV IEC (f1): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current? 16 A per phase) 80/824/CD IEC Ed.1: Maritime navigation and radiocommunication equipment and systems - Bridge alert management - Part 1: Operational and performance requirements, methods of testing and required test results 86B/4020/CDV IEC /Ed1: Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High power qualification of passive optical components for environmental category C 91/1394/CDV IEC Ed.2: Product package labels for electronic components using bar code and two-dimensional symbologies 100/2775/CDV IEC Ed1 Accessibility terms and definitions 100/2818/DTS IEC : Multimedia systems and equipment - Multimedia e-publishing and e-book - Conceptual model for multimedia e-publishing Ed.2 100/2819/DTS IEC/TD Ed.1:CAR MULTIMEDIA SYSTEMS AND EQUIPMENT - DRIVE MONITOR SYSTEM - Part 1: General (TC100) 110/809/CD IEC Ed.1: Laser display devices Part 5-4: Optical measuring methods of colour speckle 111/449/CD IEC : Environmentally Conscious Design (ECD) - Principles, requirements and guidance 120/89/DTS IEC/TS Ed.1: Electrical Energy Storage (ESS) Systems - Part 5-1: Safety consderations related to grid integrated electrical energy storage (EES) systems 121A/115/DTR IEC/TR Ed.1: Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures CABPUB/139/CD ISO/IEC CD 17028: Conformity assessment - Guidelines and Examples of a certification scheme for services 22E/178/FDIS Document 22E/178/FDIS has been withdrawn. The ballot on document 22E/178/FDIS is terminated due to additional technical changes agreed by the SC 22E/PT and the Secretariat were not included in the document. A new FDIS document will be circulated later. Page 5 of 6

6 25/572/CDV ISO Ed2: Quantities and units - Part 4: Mechanics 31/1289/CD IEC /TS/Ed1: Explosive atmospheres - Part 42: Electrical safety devices for equipment 31/1290/CD ISO/IEC /Ed : Workplace atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases 47/2319/CDV IEC Ed.1: Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors 48B/2531/CD IEC Ed.1: Connectors for electronic equipment - tests and measurements - Part : Endurance test schedules - Test 99b, Test schedule for unintended unmating under electrical load 62D/1419/CDV ISO : Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment 64/2149/CD Amendment 3 to IEC (f3): Low voltage electrical installation - Part Selection and rection of electrical equipment - Isolation, switching and control - Clause Devices for protection against overcurrent 65/637A/CDV IEC Ed1 A1: Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers 65A/815/CDV IEC A1 Ed. 2: Amendment 1 - IEC Ed. 2: Functional safety - Safety instrumented systems for the process industry sector - Normative (uon) Part 1: Framework, definitions, system, hardware and software requirements 66/617/CD IEC Ed.2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems 69/434/CDV IEC Ed. 1.0: Electric vehicle charging system - Part 21-2: EMC requirements for OFF board electric vehicle charging systems 86B/4040/CD IEC /Ed3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time 87/640/DTS IEC TS 62464: Ultrasonics - output test - Guide for the maintenance of ultrasound - Physiotherapy systems 101/522/CD ISO 20615: Fibre ropes - Electrostatic surface potential measuring method /446/CD IEC Ed. 1.0 : Definition of Low Halogen Materials used in Electrical and Electronic Products 116/303/FDIS IEC /Ed1: Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers Page 6 of 6