NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date

Transcription

1 NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date 1/2385/CDV 2/1933/CDV 14/995/FDIS 14/996/FDIS 21A/688/CDV IEC /AMD2 ED2: Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics - Section 32: Underwater acoustics IEC ED1: Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motor IEC ED1: Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers IEC ED1: Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers IEC ED1: Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4 - Coin types (button) lithium secondary cells and batteries G/381/CD IEC ED2: Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed DC power drive systems 34B/2027/CDV IEC 60400/AMD1 ED8: Lampholders for tubular fluorescent lamps and starterholders 34B/2028/CDV IEC /AMD2 ED5: Miscellaneous lampholders - Part 1: General requirements and tests 34B/2029/CDV IEC 60238/AMD2 ED9: Edison screw lampholders 34B/2030/CDV IEC 61184/AMD1 ED4: Bayonet lampholders 34D/1449/CDV IEC 60570/AMD2 ED4: Electrical supply track systems for luminaires 34D/1450/CDV IEC ED2: Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires 82/1511(F)/CDV IEC ED1: Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements 82/1541/CD IEC ED3: Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics 82/1547/CD IEC TS ED3: Renewable energy and hybrid systems for rural electrification - Part 12-1: Recommendations for selection of lamps and lighting appliances for off-grid electricity systems 82/1548/CD IEC TS ED1: Guidelines for qualifying PV modules, components and materials for operation at high temperatures 86C/1571/FDIS IEC ED1: Fibre optic active components and devices Package and interface standards Part 21: Design guide of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA) 112/444/CD IEC TR ED2: Selection guide for polymeric materials for outdoor use under HV stress CIS/A/1280/CDV CISPR /AMD1/FRAG3 ED4: Fragment 3: Amendment of the large loop antenna system (LLAS) validation and conversion factors and addition of tabular values Page 1 of 6

2 2/1933(F)/CDV IEC ED1: Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motor 13/1778/CDV IEC ED2: Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment 13/1779/CDV IEC ED2: Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) 13/1780/CDV IEC ED2: Electricity metering equipment (a.c.) - Particular Requirements - Part 22: Static meters for active energy (classes 0,1 S, 0,2 S and 0,5 S) 13/1781/CDV IEC ED2: Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) 13/1782/CDV IEC ED2: Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1S, 1, 2 and 3) 15/871/CD IEC ED2: Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors 17A/1208/FDIS IEC ED3: High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches 21A/688(F)/CDV IEC ED1: Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4 - Coin types (button) lithium secondary cells and batteries 22F/519/DTR IEC TR 62544/AMD2 ED1: High-voltage direct current (HVDC) systems - Application of active filters 22F/520/DTR IEC TR 62757/AMD1 ED1: Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible AC transmission systems (FACTS) and their valve halls 22F/521/DTR IEC TR ED1: Performance of unified power flow controller (UPFC) in electric systems 23H/431/CD IEC ED5: Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements H/432/CD IEC ED5: Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories 23H/433/CD IEC ED2: Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock 23H/434/CD IEC 61316/AMD1 ED2: Industrial cable reels /1015/DTR IEC TR ED2: Summary of requirements and tests to products in the scope of IEC /1443/CD IEC ED4: Explosive atmospheres Part 26: Equipment with separation elements or combined Levels of Protection 31/1444/CD IEC ED1: Workplace atmospheres Part 3: Gas detectors - Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods 34D/1453/CD IEC ED2: Luminaires - Part 2: Particular requirements - Section 23: Extra low voltage lighting systems for filament lamps 35/1416/FDIS IEC ED4: Safety of primary and secondary lithium cells and batteries during transport 45/865/CD IEC ED1: Requirements of tracking system for radioactive materials 45B/929/FDIS IEC ED2: Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials 46A/1377/CD IEC ED2: Coaxial communication cables - Part 6-2: Detail specification for 75-4 type CATV drop cables Page 2 of 6

3 46A/1378/CD IEC ED2: Coaxial communication cables - Part 6-3: Detail specification for type 75-5 CATV drop cables 46A/1379/CD IEC ED2: Coaxial communication cables - Part 6-4: Detail specification for 75-7 type CATV drop cables 46C/1118/FDIS IEC ED1: MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS Part 11: Symmetrical single pair cables with transmission characteristics up to 600 MHz Horizontal floor wiring Sectional specification 47/2524/CDV IEC ED1: Semiconductor devices - Semiconductor interface for human body communication- Part 4: Semiconductor interface for capsule endoscopy using human body communication 47E/631/CDV IEC ED1: Semiconductor devices - Part 18-2: Semiconductor bio sensors - Evaluation process of lens-free CMOS photonic array sensor package module 47E/632/CDV IEC ED1: Semiconductor devices - Part 18-3: Semiconductor bio sensors - Fluid flow characteristics of lens-free CMOS photonic array sensor package module with fluidic system 47E/639/CD IEC ED1: Semiconductor devices - Part 14-11: Semiconductor sensors - Test method of surface acoustic wave based integrated sensor for measuring ultra violet, illumination and temperature 49/1294/CD IEC ED1: Guidelines for the measurement method of power durability for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) applications. 59A/223/CDV IEC ED1: Electric dishwashers for commercial use - Test methods for measuring the performance 59M/104/FDIS IEC /AMD1 ED2: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers 61/5755/FDIS IEC /AMD1 ED6: Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines 61/5756/FDIS IEC /AMD2 ED3: Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances 61/5757/FDIS IEC /AMD1 ED6: Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care 61/5758/FDIS IEC /AMD2 ED4: Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam 62A/1308/CD ISO ED1: Health software and health IT systems safety, effectiveness and security - Foundational principles, concepts and terms 86/549/CD IEC ED1: Optical circuit boards - Part 2-61: Test methods - Flexibility for flexible optic-electric circuits 86A/1919/CD IEC ED1: Optical Fibre Cables Part 6: Indoor-Outdoor cables - Sectional specification for Indoor-Outdoor cables 86B/4148(F)/CDV IEC ED1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas) 86B/4172/CD IEC ED2: Fibre optic interconnecting devices and passive components Connector optical interfaces Part 3-1: Connection parameters for 1,25 mm and 2,5 mm diameter cylindrical full zirconia PC ferrules, core location variant 1, non-dispersion shifted single mode fibres Page 3 of 6

4 86B/4173/CD IEC ED2: Fibre optic interconnecting devices and passive components Connector optical interfaces Part 3-1: Connection parameters for 1,25 mm and 2,5 mm diameter cylindrical full zirconia angled PC ferrules, core location variant 1, non-dispersion shifted single mode fibres 86C/1567/CDV IEC ED1: Dynamic modules - Reliability - Part 2-1: Qualification test template 90/429/CD IEC ED2: Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors 91/1550/CDV IEC ED1: Device embedding assembly technology - Part 1: Generic specification for device embedded substrates 104/822/CD IEC ED4: Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist 112/444A/CD IEC TR ED2: Selection guide for polymeric materials for outdoor use under HV stress 113/450/CD IEC TS : Nanomanufacturing - Key control characteristics Part 4-8: Nano-enabled electrical energy storage devices - Determination of water content for electrode nanomaterials by the Karl Fischer Method 117/101/CD IEC ED1: Solar thermal electric plants Part 4-1: General requirements for the design of solar tower plants 121/44/DTR IEC TR ED1: Switchgear and controlgear and their assemblies for low-voltage - Energy efficiency 1/2385A/CDV IEC /AMD2 ED2: Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics - Section 32: Underwater acoustics 8B/34/CD IEC TS ED1: Microgrids-Technical Requirements - Protection and Dynamic Control 13/1778(F)/CDV IEC ED2: Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment 13/1781(F)/CDV IEC ED2: Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) 13/1782(F)/CDV IEC ED2: Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1S, 1, 2 and 3) 14/998/CD IEC ED1: Power transformers - Part 22-5: Power transformer and reactor fittings - Pumps 14/999/CD IEC ED1: Power transformers - Part 24: Specification of Voltage Regulating Distribution Transformers (VRDT) 18/1649/FDIS IEC ED4: Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions 18/1650/FDIS IEC ED3: Mobile and fixed offshore units - Electrical installations - Part 2: System design 18/1651/FDIS IEC ED4: Mobile and fixed offshore units - Electrical installations - Part 3: Equipment 18/1652/FDIS IEC ED2: Mobile and fixed offshore units - Electrical installations - Part 4: Cables 18/1653/FDIS IEC ED4: Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units 18/1654/FDIS IEC ED4: Mobile and fixed offshore units - Electrical installations - Part 6: Installation 18/1655/FDIS IEC ED4: Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas 18/1656/FDIS IEC ED1: Electrical installations in ships - Part 302-2: Low voltage switchgear and controlgear assemblies Marine power 22F/522/CD IEC TR ED4: Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions 23E/1091/CDV IEC /AMD1 ED2: Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation Page 4 of 6

5 23E/1122/FDIS IEC ED1: Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations- Part 3: Circuit-breakers for DC operation 23H/434A/CD IEC 61316/AMD1 ED2: Industrial cable reels /1443A/CD IEC ED4: Explosive atmospheres Part 26: Equipment with separation elements or combined Levels of Protection 35/1417/CD IEC ED5: Primary batteries - Part 5: Safety of batteries with aqueous electrolyte 38/599/CDV IEC ED1: Instrument Transformers - Part 13: Standalone Merging Unit 47/2540/CD IEC ED1: Long-term storage of electronic components Part 8: Passive electronic devices 49/1295/DTS IEC TS ED1: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 5: Piezoelectric sensors 56/1831/CDV IEC ED2: Reliability testing - Compliance test plans for success ratio 61/5760/FDIS IEC /AMD1 ED5: Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers 62A/1310/CD IEC Ed. 2: Health software - Software life cycle processes 62C/735/CD IEC ED3: Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems 62D/1666/FDIS IEC ED1: Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograph 70/144/CD IEC 62262/AMD1 ED1: Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) 77B/797/FDIS IEC ED2: Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test 79/618/CD IEC ED1: Alarm and electronic security systems - Part 11-33: Electronic access control systems - Access control configuration for IP Interoperability based on web services 82/1531/CDV IEC ED1: Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing 82/1556/CD IEC ED3: Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics 86A/1906/CDV IEC ED9: Optical fibres - Part 2: Product specifications - General 86A/1920/CD IEC ED1: Optical Fibre Cables - Part 6-10: Indoor-Outdoor cables - Family specification for a Universal Indoor-Outdoor cable 86A/1921/CD IEC ED1: Optical Fibre Cables - Part 6-20: Indoor-Outdoor cables - Family specification for Flame Retardant Outdoor cables 86A/1922/CD IEC ED1: Optical Fibre Cables - Part 6-30: Indoor-Outdoor cables - Family specification for Weatherized Indoor cables 86B/4174/CD IEC ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism 89/1463/CD IEC ED3: Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure 100/3184/CDV IEC 62760/AMD1 ED1: Audio reproduction method for normalized loudness level (TA 20) 116/399/CDV IEC /AMD1 ED2: Household and similar electrical appliances - Safety - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers 117/102/CD IEC TS ED1: Solar thermal electric plants - Part 2-1: Thermal energy storage systems - Characterization of active, sensible systems for direct and indirect configurations Page 5 of 6

6 117/103/CD IEC ED1: Solar thermal electric plants - Part 3-1: General requirements for the design of parabolic trough solar thermal electric plants SyCSmartEnergy/10 IEC TS ED1: System Reference Deliverable SRD: Definition of Extended SGAM Smart Energy Grid Reference 2/CD Architecture JTC1- ISO/IEC ED1: Information technology - Home electronic system (HES) architecture - Part 5-12: Intelligent SC25/2854/FDIS grouping and resource sharing for HES Class 2 and Class 3 - Remote access test and verification JTC1-SC41/81/CD ISO/IEC ED1: Internet of Things (IoT) Wireless sensor network system supporting electrical power substation JTC1-SC41/84/CD ISO/IEC ED1: Internet of Things (IoT) - Interoperability for IoT Systems - Part 2: Transport interoperability 8/1512/DTS IEC TS ED2: Assessment of power quality - Characteristics of electricity supplied by public networks A/911/DTR FUNCTIONAL SAFETY SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR Part 4: Explanation and rationale for changes in IEC from Edition 1 to Edition 2 100/3212/DTR IEC TR ED1: Radio Frequency(RF) Beam Wireless Power Transfer/Transmission (WPT) for Mobile devices /454/DTS IEC TS ED1: Nanomanufacturing - Key control characteristics - Part 6-1: Graphene powder Volume resistivity: four probe method 113/455/DTS IEC TS ED1: Nanomanufacturing Key control characteristics Part 6-13: Graphene powder - Oxygen functional groups content: Boehm titration method 117/104/DTS IEC TS ED1: Solar thermal electric plants - Part 3-3: Systems and components - General requirements and test methods for solar receivers 51/1272A/FDIS IEC ED1: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFDcores 62C/738/DTR IEC TR ED1: Guidance on error and warning messages for software used in radiotherapy 62D/1671/FDIS IEC ED2: Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment 65B/1147/FDIS IEC ED1: Programmable controllers Part 10: PLC open XML exchange format 86A/1923/FDIS IEC ED3: Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling 86A/1924/FDIS IEC ED3: Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling 86A/1925/FDIS IEC ED3: Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling 89/1465/DTS IEC TS ED3: Fire hazard testing - Part 2-20: Glowing/hot-wire based test methods - Hot wire ignition test Apparatus, confirmatory test arrangement and guidance 106/480/FDIS IEC ED2: Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz) Page 6 of 6