Documents Title Closing Date

Transcription

1 NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od 1. mája 2013 do 31. mája 2013 Documents Title Closing Date 3/1145/CD IEC DB Extended procedure for change request C00257; graphical symbol S01910 Sensor 3C/1863/CDV IEC Pr: Hearing aid 9/1786A/CDV IEC Ed.1: Railway applications - Fixed installations - Traction transformers 9/1790/CDV IEC A1 Ed.2: Amendment 1 to IEC Ed.2: Railway applications - Fixed installations - DC switchgear - Part 1: General 9/1791/CDV 9/1792/CDV 9/1803/FDIS 9/1804/FDIS 9/1805/FDIS IEC A1 Ed.2: Amendment 1 to IEC Ed.2: Railway applications - Fixed installations - DC switchgear - Part 2: DC circuit breakers IEC A1 Ed.1: Amendment 1 to IEC Ed.1: Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies IEC Ed.2: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock IEC Ed.2: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems IEC Ed.1: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual interaction of a.c. and d.c. traction systems 10/900/CDV IEC Ed.3: Specifications for unused silicone insulating liquids for electrotechnical purposes 10/907/CD IEC Ed.3: Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis 13/1530/CDV 13/1546/FDIS IEC /Ed2: ELECTRICITY METERING - PAYMENT SYSTEMS - Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systems IEC /Ed.1:Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling Page 1 of 9

2 14/746/CDV IEC Ed.2: Tap-changers - Part 1: Performance requirements and test methods A/1042/FDIS IEC Ed.1: High-voltage switchgear and controlgear - Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines 17A/1044/FDIS IEC Ed.1: High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures B/1821/FDIS IEC Ed.2: Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) 17B/1822/FDIS IEC Ed.1: Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors 17B/1814/CDV IEC Ed.3: Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet 20/1436/CDV 20/1437/CDV 20/1438/CDV 22F/302/CDV 22F/303/CDV 23A/685/CDV 23B/1102/CDV IEC : Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 1: general requirements IEC : Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 2: Test methods IEC : Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 3: Flexible cables (cords) IEC Ed.1: Determination of power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements IEC Ed.1: Determination of power losses in voltage sourced converter (VSC) valves for high voltage direct current (HVDC) systems - Part 2: Modular multilevel converters IEC Ed.2: Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation IEC Ed.2: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements E/793/CD IEC Ed.1: In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD) E/795/FDIS Amendment 2 to IEC Ed.3: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules Page 2 of 9

3 23E/796/FDIS Amendment 2 to IEC Ed.3: Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules /805/CDV IEC : Electroaccoustics - Hearing aids - Electromagnetic compatibility (EMC) 29/804/CDV IEC : Electroacoustics - Hearing aids - Measurement of the performance characteristics of hearing aids 31J/221/CD IEC Ed. 2.0: Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres 31J/223/CD IEC /A1/Ed3: Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation 33/532/FDIS CEI A1/Ed2: Condensateurs des moteurs à courant alternatif - Partie 1: Généralités - Caractéristiques fonctionnelles, essais et valeurs assignées - Règles de sécurité - Lignes directrices pour l'installation et l'utilisation /533/FDIS IEC A1/Ed2: AC motor capacitors - Part 2: Motor start capacitors /531/FDIS IEC /Ed1: Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application A/1659/CDV IEC Ed.1: LED modules for general lighting - Performance requirements 34C/1034F/CDV IEC A3 Ed.2: Amendment 3 - Lamp controlgear - Part 1: General and safety requirements 34C/1036F/CDV IEC A1 Ed.2: Amendment 1 - Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements 34C/1050/CD IEC A1 Ed.2: Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps 34D/1093/CDV IEC Ed.1: Luminaire performance - Part 2-1: Particular requirements for LED luminaires 37/406/CDV IEC /Ed3: Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems /407/CDV IEC /Ed1: Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations Page 3 of 9

4 40/2211/CDV 40/2212/CDV IEC Ed.3: Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethyleneterephthalate film dielectric surface mount d.c. capacitors IEC Ed.2: Fixed capacitors for use in electronic equipment - Part 23: Sectional specification: Fixed surface mount metallized polyethylene naphthalate film dielectric d.c. capacitors 40/2227/CDV IEC Ed.1: Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics 45/754/FDIS 46/457/CDV 46/459/CD IEC Ed.2: Nuclear instrumentation - High-purity germanium crystals for radiation detectors - Measurement methods of basic characteristics IEC ed 1.0-RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - Part 2-7: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to MHz, IEC connectors IEC : Metallic Communication Cable test methods? Part 4-7: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the Transfer impedance ZT and the screening attenuation as or the Coupling attenuation ac of RF- Connectors and assemblies up to and above 3 GHz; Tube in Tube method 47/2169/CD IEC Ed.1: Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plan A/903/CD 47D/835/CD 47D/834/CD IEC/TS Ed.1: Integrated circuits, measurement of electromagnetic immunity - Part 9: Measurement of radiated immunity - Surface scan method IEC Ed.2: Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA IEC Ed.2: Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Finepitch Ball Grid Array and Fine-pitch Land Grid Array (FBGA/FLGA) 47F/150/CDV IEC Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes 48B/2339B/CDV 48D/541A/CD 48D/542/FDIS IEC /Ed2: Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking IEC Ed1.0: Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part-3-108: Dimensions of subracks R-type and plug-in units IEC /Ed1: Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC and IEC series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets /1392/FDIS IEC /A1/Ed3: Winding wires - Test methods - Part 3: Mechanical properties Page 4 of 9

5 55/1393/CD IEC /Ed1: Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire /1398/CD IEC 60172/Ed 4: Test procedure for the determination of the temperature index of enamelled winding wires 57/1366/FDIS 57/1358/FDIS IEC Ed.1: Energy management system application program interface (EMS-API) - Part 452: CIM Static transmission network model profiles Interface de Programmation d'application pour Système de Gestion d'énergie (EMS-API) - Partie 452: Profils du modèle de réseau de transmission statique CIM IEC Ed.1: Application integration at electric utilities - System interfaces for distribution management - Part 100: Implementation profiles /1370/DTS IEC TS Ed.1Framework for energy market communications - Part 503: Market data exchanges guidelines for the IEC profile 59A/175/CD IEC Ed.4: Electric dishwashers for household use - Methods for measuring the performance C/169/CDV IEC Ed.3: Household electric blankets - Methods for measuring performance 59C/170/CDV IEC Ed.2: Household electric heating pads - Methods for measuring performance 59K/243/CDV IEC A1 Ed.4: Amendment 1 to IEC Ed.4: Household microwave ovens - Methods for measuring performance 59M/47/CDV IEC Ed.1: Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements M/48/CDV IEC Ed.1: Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements M/49/CDV IEC Ed.1: Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume A/863/CDV IEC 62353: Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment 62D/1072/FDIS 64/1882/CDV Amendment 1 to IEC : Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated type non-invasive sphygmomanometers IEC : Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems Page 5 of 9

6 65/527/CDV IEC Ed. 1:Document kinds for Electrical and Instrumentation Projects in the Process Industry /531/FDIS IEC : Industrial communication networks - Network and system security -Part 3-3: System security requirements and security levels 65B/873/FDIS IEC /Ed.3:Thermocouples- Part 1 Ed 3.0: EMF specifications and tolerances B/874/FDIS EC Ed 1: Programmable Controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) B/875/DTS IEC/TS Ed 1: Industrial process control systems - Guideline for evaluating process control systems part 1: Specifications 65C/736/FDIS IEC : Industrial communication networks - Wireless communication networks - Part 2: Coexistence management 65C/737/FDIS IEC 61918: Industrial communication networks - Installation of communication networks in industrial premises C/738/FDIS IEC x: Industrial communication networks - Profiles - Part 5-x: Installation of fieldbuses - Installation profiles for CPF x /245/CD IEC /Ed.1:Electric vehicle conductive charging system - Part 21-2: EMC requirements for OFF board electric vehicle charging systems 77B/685/CDV IEC : Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test 78/1014/FDIS IEC 60743: Live working - Terminologie for tools, devices and equipment /419/DTS IEC TS Ed.1: Alarm and electronic security systems - Part 7-8: Alarm transmission systems - Requirements for common protocol for alarm transmission using the Internet protocol 82/763/CDV IEC Ed.1: Connectors for DC-application in photovoltaic systems - Safety requirements and tests 82/764/CDV IEC Ed.1: Junction boxes for photovoltaic modules - Safety requirements and tests 82/776/DTS IEC TS Ed.1: Specification of concentrator cell description Page 6 of 9

7 86A/1519/CD IEC /Ed2: Optical fibres - Part 1-43: Measurement methods - Numerical aperture measurement 86B/3627/FDIS IEC /Ed2: Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family 86B/3630/CD IEC /Ed2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector and transceiver endface visual and automated inspection C/1158/DTR 86C/1159/CD IEC /TR/Ed3: Optical amplifier - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers IEC /Ed1: Optical amplifiers - Test methods - Part 4-3: Power transient parameters in single channel optical fibre amplifiers with output power control /1157/CDV IEC /Ed1: Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids 90/326/FDIS 91/1099/CD 91/1100/CD 91/1090/CDV IEC : Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloysheathed Bi-2223 and Bi-2212 composite superconductors IEC Ed.1: Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogen epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly IEC Ed.1: Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly IEC Ed. 1: Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices /1102/DTR IEC/TR Ed.1: Documentation on the evaluation of Electrochemical Migration in Printed Wiring Boards /313/FDIS IEC Ed.1: Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays /403/CD IEC Ed.3: Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements 100/2121A/CDV IEC Ed. 2.0: Radio Data System (RDS) - Receiver products and characteristics - Methods of measurement (TA 1) /2122A/CDV IEC Ed. 3: Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz (TA 1) Page 7 of 9

8 100/2153/FDIS IEC /Ed. 1: Universal Serial Bus interfaces for data and power Part 2: USB Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14) /2129/CDV IEC /Ed.1: Multimedia systems and equipment - Colour measurement and management /2156/FDIS IEC /Ed. 1: Universal Serial Bus interfaces for data and power Part 1: Universal Serial Bus Specification, Revision 2.0 (TA 14) 100/2157/FDIS IEC /Ed. 1: Universal Serial Bus interfaces for data and power Part 3: USB Battery Charging Specification, Revision 1.2 (TA 14) /391/CDV IEC Ed. 2: Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags /603/CDV IEC Ed.2: Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests /609/CDV IEC Ed.2: Environmental testing - Part 2-39: Tests and Guidance: Combined temperature or temperature and humidity with low air pressure tests 105/450/DTS IEC TS Ed.3: Fuel cell technologies - Part 1: Terminology 110/457/CDV IEC Ed.1: Electronic paper displays - Part 1-1 : Terminology 110/461/CDV IEC Ed.1: Electronic paper displays Part 3-1: Optical measuring methods /474/FDIS IEC Ed.1: Organic Light Emitting Diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime /475/FDIS IEC Ed.1: Electronic paper display - Part 3-2: Measuring method - Electro-optical /465/CDV IEC Ed. 2: Organic light emitting diode displays - Part 1-2: Terminology and letter symbols 111/303/CDV IEC nd Edition - Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS), Ion Attachment Mass Spectrometry (IAMS) and High Pressure Liquid Chromatography - Ultra Violet detection (HPLC-UV) 112/245/CDV IEC Ed. 3: Electric strength of insulating materials - Test methods - Part 2 : Additional requirements for tests using direct voltage Page 8 of 9

9 112/246/CDV IEC Ed. 3: Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests /256/DTS IEC/TS Ed. 1: Electrical Insulation Systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified Test 112/258/DTR IEC/TR Ed.1: Measurement of Internal Electric Field in Insulating Materials used by Pressure Wave Propagation Method /114/CD IEC TS Ed.1: Marine energy - Wave, tidal and other water current converters - Part 10: Assessment of mooring system for marine energy converters (MECS) /71/DTR IEC/TR Ed.1: Electromagnetic Environment Criterion for High-voltage Direct Current (HVDC) Overhead Transmission Lines CIS/A/1031/CDV Amendment 2 to CISPR (f2): Requirements when using an external preamplifier with a measuring receiver CIS/F/604/CD Amendment 3 to CISPR 14-2: Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity CIS/F/606/CD CISPR 14-1 (f1): Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission CIS/F/607/CD CISPR 14-1 (f2): Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission JPC2/38/CDV JPC2/39/CDV ISO/IEC : ISO/IEC : Energy efficiency and renewable energy sources - Common international terminology - Part 1: Energy Efficiency ISO/IEC : Energy efficiency and renewable energy sources - Common international terminology - Part 2: Renewable Energy Sources Page 9 of 9