EU Declaration of Conformity

Transcription

1 ...Innovative liquid vaporizing and gas mixing solutions EU Declaration of Conformity WE, Algas-SDI 151 South Michigan Street Seattle, WA USA Declare, solely under own responsibility, that the product Model: Second Sun Series, LPG catalytic tank heater for increase pressure and vaporization in a LPG storage tank. Mentioned in this declaration, complies with the following standards and/or normative documents: Requirements Remarks Certificates No. 2014/34/EU Product Quality Assurance Presafe 17 ATEX 18187Q ATEX Directive Notified Body: DNV GL Nemko Presafe AS 2460 Veritasveien 3, 1363 Høvik, Norway II 2 G Ex db ia IIB T1 TÜV 13 ATEX X IECEx TUN X EN :2012 EN :2007 EN :2012 Explosive atmospheres - Part 0: Equipment - General requirements Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" Notified Body: TÜV NORD CERT GmbH 0044 Am TÜV Hannover Germany 2009/142/EC Gas Appliance Directive (GAD) 845CO-0004 Notified Body: Danish Institute of Fire and Security Technology 0845 Jernholmen 12 DK-2650 Hvidovre Mike Zimmer, PE Directory of Engineering May 12, 2017

2 Certificate No. 845CO-0004 rev.3 File No. PBA Sheet 1 of 2 EC-TYPE EXAMINATION (MODULE B) CERTIFICATE This is to certify that: No. 845CO-0004 Danish Institute of Fire and Security Technology, specified as a "notified body" under the terms of the Danish Safety Technology Authority, did undertake the relevant type approval procedures for the equipment identified below which was found to be in compliance with the essential requirements of Gas Appliance Directive (GAD) 2009/142/EC, subject to any conditions in the description attached hereto. Applicant Address Algas-SDI 151 South Michigan Street, Seattle, Washington, USA Type of Appliance Trade Mark Type/Model LPG tank heater Second Sun SS-30, SS-20, SS-10 Specified Standards - The attached (description of type approval) forms part of this certificate. This certificate remains valid unless cancelled or revoked, provided the conditions in the attached description are complied with and the equipment remains satisfactory in service. Date of issue Issued by Danish Institute of Fire and Security Technology Notified Body No Signed Name Ken Olesen Note: This certificate will not be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with the notified body named on this certificate. XXXX/YY Subject to compliance with the conditions in the annex Description of Type Approval, which forms part of this certificate, and those of Annex II and Annex III of the Directive, the Manufacturer is allowed to affix the "Mark of Conformity" to the product described herein. yy xxxx Last two digits of the year in which the mark is affixed Number of the Notified Body responsible for quality surveillance module This certificate is issued under the authority of the Danish Safety Technology Authority.

3 Certificate No. 845CO-0004 rev.3 File No. PBA Sheet 2 of 2 Product Description Trade Marks Second Sun Type/Model SS-30, SS-20, SS-10 (Annex) Description of Type Approval Model Country of destination Category Pressure High pressure Low pressure SS-10 All EU and NO, IS and CH LPG Direct pressure 42 mbar SS-20, SS-30 All EU and NO, IS and CH LPG Direct pressure 30 mbar Technical Data Heat Input: SS-30:30000 BTU/h, 8.8 kw SS-20:20000 BTU/h, 5.9 kw SS-10:10000 BTU/h, 2.9 kw Comments: This approval include the use of Fisher LPG regulator type or type R232 Type Approval Documentation Test report : Drawings : Statements: Instructions: Others: DBI evaluation report no. PBA10096 dated , regarding compliance with: - Gas Appliance Directive 2009/142/EC List of drawings Statement from the manufacturer regarding the suitability of the used materials. Instructions: Installation, Operation and Maintenance Manual SECOND SUN P/N51856 Report no. SS dated April 2013 from Algas-SDI showing compliance with the ATEX Directive 94/9/EC for use in zone 1 End of Certificate Jernholmen 12 DK-2650 Hvidovre Phone: Fax: dbi@dbi-net.dk

4

5

6

7

8

9

10

11 OVERENSSTEMMELSESATTEST / Internal Manufacturing checks with monitoring of the final assessment CERTIFICATE Enheden er efter direktivets (For pressurized equipment built acc. to the EU-directives) Modul A2 Det attesteres, at Kiwa Inspecta som bemyndiget organ nr har kontrolleret enheden. It is certified that Kiwa Inspecta Notified body no has controlled the assembly. Beskrivelse af det trykbærende anlæg: Væsentlige grænser: Dato: Description of the pressure equipment: Essential limits: Sagsnummer: Rekvirent: Client: Algas-SDI International LLC 151 South Michigan Street WA Seattle, USA Kategori: I, II, III eller IV Category: II Kammer/Chamber Inspektionssted: Place of inspection: Algas SDI International Over Holluf Vej Odense SØ Tilladt tryk: All. Pressure: PS LP:30mbar HP: direct pressure Bar Fabrikant: Manufacture: Algas-SDI International LLC 151 South Michigan Street WA Seattle, USA Prøvningstryk/Test pressure: PT Bar Type: Type: Catalytic tank heater "Second Sun" Model: SS-10, SS-20, SS-30 Tilladt temp.: All. Temp.: TS -40/49 C Løbenummer: Serial nummer: Fremstillingsår: Year of manufacture: ~ Volume: Volume: V Fluida Gruppe:1 or Group of fluids: 2 Dokumentation er udstedt af Notified Body eller myndighed, sagsnummer: The documentation is issued on basis of Notified Body, Case No.: , CE1727 See list of drawings for model: SS-10, SS-20, SS-30. Tegningsnummer.: Drawings No.: Risk assesment document no: SS Version 11. ATEX aproval: TÜV 13 ATEX X. DBI Aproval: 845CO-0004 rev. 1, IECEx certificate: IECEx TUN X 1 L Kontrollen er foretaget på basis af reglerne i bekendtgørelse om indretning m.v. af trykbærende udstyr og i overensstemmelse med bestemmelserne for modul A2 i EF-direktiv nr. 2014/68/EU. The control is carried out on basis of the rules in notice No. 190 on arrangement of pressurized equipment and in conformity with the regulations for modul A2 in EC-directive No. 2014/68/EU. Det trykbærende udstyr er mærket med CE 1727/The pressurized equipment is marked with CE Gyldig for fremstillng af trykbærende anlæg indtil: Valid for manufacturing of pressurized equiment until: Month: 9 Years: 2018 Kiwa Inspecta A/S Rapporten må kun gengives i sin helhed. Dele af rapporten må gengives hvis der foreligger en godkendelse fra Kiwa Inspecta og rekvirenten. The report must be reproduced only in full. Reproduction of parts of the report is subject to the approval of Kiwa Inspecta and the Client. Kiwa Inspecta A/S I Vadgaardsvej 25 I 6830 Nr. Nebel I T:(+45) I M: info@inspecta.dk I Rev