JURISDICTION NOTES INDEX VICINITY MAP REV BY DATE COMMENTS REV A KEITH 3/6/2014 ADDED THE 2013 IFC * * * *

Transcription

1 ABBREVIATIONS ELETRIAL NOTES JURISDITION NOTES VIINITY MAP INDEX LIENSE GENERAL NOTES REV BY DATE OMMENTS REV A KEITH 3/6/204 ADDED THE 203 IF * * * * * * * * * * * * * * * *

2 MP Metal Seam Stories Un-Locked Gated Front Of House LEGEND 3' Fire Setback 3' Fire Setback MP 3' Fire Setback (E) DRIVEWAY 3' Fire Setback 3' Fire Setback A PV3 SITE PLAN Scale: /8" = ' 0 ' 8' 6'

3 A SIDE VIEW OF MP NTS LANDSAPE PORTRAIT X-SPAING RAFTER: 0 24" O.J.: MP None 32" 9" 0" 0" X-ANTILEVER Y-SPAING Y-ANTILEVER ROOF ARRAY 250 PITH PITH 9 Metal Standing Seam NOTES STAGGERED STORIES: 2 SP SP S-5 DETAIL SHOWING SEAM PROFILE Scale: 3"='-0" S STANDOFF Scale: /2" = '

4 GROUND SPES MAIN PANEL SPES GENERAL NOTES INVERTER SPES MODULE SPES LIENSE INV INV 2 INV 3 Inverter B V A 2 3 String(s) Of On MP POI B A A D 3 Vmp = VA Imp = AA 2 Voc* = VD Isc = AD Vmp = VD Imp= AD Voc* = VD Isc = AD Vmp = VD Imp= AD

5 ELETRIAL ALULATIONS String(s) Module Type: Module ount: Icont = (Amps): Yingli YL250P-29b YGE-Z Branch ircuit Parallel MPPT 3 strings per Branch A modules per series string String Branch A onductor: onductor: Icont *.25 = (Amps) 30 deg ampacity = PV Wire Size: Icont = (Amps) Start ampacity Temperature derate (%=F) onduit fill derate (%=#) Derated ampacity Icont *.25 = (Amps) Ampacity Inverter Output Inverter Type: Inverter ount: Fronius IG Plus A 7.5 AFI AWG_0 AWG_ Total Icont = (Amps): 3.2 Icont *.25 = (Amps) OP Size = onductor 3: AWG_8 Icont *.25 = (Amps) 30 deg ampacity = Icont = (Amps) Start ampacity Temperature derate (%=F) onduit fill derate (%=#) Derated ampacity Icont *.25 = (Amps) Ampacity THWN

6 () NE E.3 (D) (INV) NE (POI) NE B.4 (D) (INV) NE (A) (D) (INV) NE (F) TO BE USED WHEN INVERTER IS UNGROUNDED (A) (POI) NE (A) (POI) NE (A) (POI) NE 690.7(4) (A): A Disconnect (): onduit (B): ombiner Box (D): Distribution Panel (D): D Disconnect (I): Interior Run onduit (INV): Inverter With Integrated D Disconnect (L): Load enter (M): Utility Meter (POI): Point of Interconnection S - O XEL Label Set 3055 leaview Way San Mateo, A T:(650) F:(650) (888)-SOL-ITY ( )

7 S-5! Attachment Hardware Modern standing seam roofing systems boast that by design, fastening through the weathering membrane is greatly reduced or eliminated. Unfortunately, when it becomes necessary to attach something to the roof, there has never been a way to do it without compromising roof integrity and voiding system warranties. Such attachments have in the past been the source of leaks, panel corrosion and repeated maintenance problems. against the seam material (this is usually done with an industrial grade screwgun). The set screws compress the seam material against the opposite wall of the clamp. They will "dimple" the seam material, but will not penetrate it. Threaded holes in the clamp (and stainless hardware provided) enable the easy attachment of various ancillary items to the clamps. The S-5! clamp systems now offer a complete solution to the attachment of a wide variety of ancillary rooftop accessories, including HVA equipment, signage, solar panels, snow retention hardware, gas piping and conduit, rooftop lighting, fascias, equipment screens, parapet bracing, condensate lines, stack and flue bracing, antennae, roof walkways and more. S-5-U on a vertical seam S-5-U on a horizontal seam A variety of S-5! clamp styles are available: opyright 2000, Metal Roof Innovations, Ltd The S-5-U will fit most "structural" and "architectural" panel seam styles. The S-5-Z is specially designed to fit ZipRib, Kal-Zip and similar profiles. The S-5-B is a brass clamp, designed for use on double-folded standing seam or traditional batten seam copper. The S-5-E is an aluminum clamp designed to fit traditional double-folded standing seam profiles. Metal Roof Innovations, Ltd., also develops custom clamps. We invite you to ontact Us with inquiries about special requirements. Aluminum clamps are metallurgically compatible with bare or painted galvanized, Galvalume, Aluminized and Galfan coated steel, as well as bare or painted aluminum, stainless and zinc sheet products. In most applications, the clamp should be installed at a location on the seam that avoids the panel s attachment clip location. S-5! clamps may also be used at a clip location, provided the clip is an expansion (dualcomponent) clip. All aluminum clamps are furnished with a stainless steel bolt and washer (3/8" diameter x 5/8" length; bolt head size is 9/6"). For more detailed installation instructions, see the Installation section. S-5! clamps attach to the panel seam by the tightening of two "bullet-nosed" stainless steel set screws

8 YGE-Z 60 ELL SERIES YINGLI SOLAR Z SERIES Ideal for residential and commercial applications where cost savings, installation time, and aesthetics matter most. Best hoice for INSTALLERS Lower balance-of-system costs with Zep ompatible frame. Reduce on-roof labor costs by more than 25%. A SOLUTION OPTION YL260P-29b YL255P-29b YL250P-29b YL245P-29b YL240P-29b Leverage the built-in grounding system if it s mounted, it s grounded. Decrease your parts count eliminate screws, rails, mounting clips, and grounding hardware. Best hoice for HOMEOWNERS Minimize roof penetrations while maintaining the system s structural integrity. Invest in an attractive solar array that includes aesthetic array skirt. layouts (portrait or landscape). Trust in the reliability and theft-resistance of the Zep ompatible system. The YGE-Z Series is now available as an Enphase Energized A Solution. This solution delivers optimum performance and integrated intelligence. The Enphase M25-Z Zep ompatible ENERGIZED Microinverter is designed to connect directly into the Z Series module groove, eliminating the need for tools or fasteners all with one easy step. WARRANTIES Leading limited power warranty* ensures 9.2% of rated power for 0 years, and 80.7% of rated power for 25 years. 0-year limited product warranty. * In compliance with our warranty terms and conditions. QUALIFIATIONS & ERTIFIATES ZEP OMPATIBLE FRAME U.S. TARIFF-OMPLIANT YGE-Z 60 ELL SERIES ELETRIAL PERFORMANE Electrical parameters at Standard Test onditions (ST) Module type YL260P-29b YL255P-29b YL250P-29b YL245P-29b YL240P-29b Power output Pmax W Power output tolerances max % -0 / +3 m % max mpp urrent at Pmax Impp A Open-circuit voltage oc Short-circuit current Isc A ST: 000W/m 2 irradiance, 25 cell temperature, AM.5g spectrum according to EN according to EN Electrical parameters at Nominal Operating ell Temperature (NOT) Power output Pmax W max mpp urrent at Pmax Impp A Open-circuit voltage oc Short-circuit current Isc A NOT: open-circuit module operation temperature at 800W/m 2 irradiance, 20 ambient temperature, m/s wind speed THERMAL HARATERISTIS Nominal operating cell temperature NOT 46 +/- 2 max %/ oc %/ sc Isc %/ 0.05 mpp %/ OPERATING ONDITIONS Max. system voltage Max. series fuse rating Limiting reverse current Operating temperature range Max. static load Max. hailstone impact (diameter / velocity) ONSTRUTION MATERIALS Front cover (material / thickness) ell (quantity / material / dimensions / number of busbars) Encapsulant (material) Frame (material / color / edge sealing) Junction box (ingress protection rating) 600VD or 000VD 5A 5A -40 to 85 F (-40 to 85 ) 2400Pa 25mm / 23m/s low-iron tempered glass / 3.2mm 60 / multicrystalline silicon / 56mm x 56mm / 2 or 3 ethylene vinyl acetate (EVA) anodized aluminum alloy / black / silicone or tape able (length / cross-sectional area) 00mm / 4mm 2 onnector (type / ingress protection rating) 3.94 (00) 2.7 (55) GENERAL HARATERISTIS Dimensions (L / W / H) 64.96in (650mm) / 38.98in (990mm) /.8in (46mm) Weight 45.2lbs (20.5kg) PAKAGING SPEIFIATIONS Number of modules per pallet 22 Number of pallets per 40' container 28 Packaging box dimensions (L / W / H) Box weight Units: inch (mm) Grounding holes 6 ø0.236 (6) Mounting holes x0.35 (6.5x8) Drainage holes 8 0.2x0.35 (3x8).8 (46) (990) (936) 0.47 (2) 43.3 (00).38 (35) SETION (967) (650) 3.94 (00).8 (46) Warning: Read the Installation and User Manual in its entirety before handling, installing, and operating Yingli modules (650) Intelligent real-time monitoring at the system and module level with Enlighten. UL 703 and UL 703, E, FSE, ISO 900:2008, ISO 400:2004, BS OHSAS 800:2007, SA8000 If you buy from Yingli Americas, Yingli Americas acts as the importer and complies with all applicable tariffs. ustomers can buy from Yingli Americas with no worry that they will be liable for any import tariffs. This datasheet complies with EN 50380:2003 requirements. Our Partners YINGLISOLAR.OM/US Yingli Americas Yingli Green Energy Americas, Inc. info@yingliamericas.com Tel: + (888) YINGLISOLAR.OM/US NYSE:YGE Yingli Green Energy Holding o. Ltd. YGEZ60ellSeries203_EN_20309_V0

9 / Battery harging Systems / Welding Technology / Solar Electronics FRONIUS IG PLUS ADVANED INVERTER WITH INTEGRATED AFI / MIX Technology / Smart Transformer Switching / WLAN / Quick Service Technology / Smart Grid Ready / The Fronius IG Plus Advanced is the first complete inverter lineup of the NE 20 compliant AFI protected inverters in the United States. Power classes ranging from 3 to 2 kw in both single and true 3 phase applications with integrated Fronius MIX Technology and wide voltage windows are the perfect match for your system design. TEHNIAL DATA: FRONIUS IG PLUS ADVANED (3.0-UNI, 3.8-UNI, 5.0- UNI,6.0- UNI,7.5-UNI) INPUT DATA Recommended PV-Power (kwp) Nominal Input urrent Max. Usable Input urrent MPPT - Voltage Range D Startup Max. Input Voltage Admissable onductor Size (D) Max. urrent per D Input Terminal 3.0-UNI 3.8-UNI A 4.0 A A 7.8 A 5.0- UNI 6.0-UNI 7.5- UNI A 6.5 A 23.4 A 28. A V 260 V 600 V No. 4 to 6 AWG. For larger wire, use Fronius connecting distributor. 20 Amps. For higher input current, use Fronius connecting distributor A 35. A TEHNIAL DATA: FRONIUS IG PLUS ADVANED (3.0- UNI, 3.8-UNI, 5.0-UNI,6.0-UNI,7.5-UNI) OUTPUT DATA 3.0-UNI 3.8-UNI 5.0-UNI 6.0-UNI 7.5- UNI Nominal Output Power Max. ontinuous Output Power A Output Voltage Number of Phases Admissible onductor Size (A) Max. ontinuous Utility Backfeed urrent Nominal Output Frequency Operating Frequency Range Total Harmonic Distortion Power Factor 3,000 W 3,000 W 3,800 W 3,800 W 5,000 W 5,000 W 208 / 240 / 277 6,000 W 6,000 W 7,500 W 7,500 W GENERAL DATA 3.0-UNI Max. Efficiency Unit Dimensions (W x H x D) E Efficiency x 26.5 x 9.9 in % 5.0-UNI Max. ontinuous Output urrent PROTETIVE EQUIPMENT 6.0-UNI 7.5- UNI x 38. x 9.9 in. 7. x 38. x 9.9 in. 7. x 38. x 9.9 in. 208 V 95.0 % 240 V 277 V onsumption in Standby (Night) <.5 W onsupmtion During Operation 8W 8W 4 W 4 W 4 W ooling ontrolled forced ventilation, variable speed fan Enclosure Type NEMA 3R Power Stack Weight 3 lbs. (4 kg) 3 lbs. (4 kg) 57 lbs. (26 kg) 57 lbs. (26 kg) 57 lbs. (26 kg) Wiring ompartment Weight 24 lbs. ( kg) Admissable Ambient Operating Temperature -3o F...+3o F (-25o...+55o ) Advanced Grid Features Active and reactive power control, low voltage ride-through UL , IEEE , IEEE 547., UL 699B-203, ANSI/IEEE 62.4, F Part 5 A & B, NE Article 690, ompliance No (Sept. 20) alifornia Solar Initiative - Program Handbook - Appendix : Inverter Integral 5% Meter Performance Specification 7. x 26.5 x 9.9 in % Operating A Voltage Range No. 4-4 AWG 0A 60 Hz Hz <3 % 0.85 ind. / cap. 3.8-UNI EFFIIENY Ground Fault Protection D Reverse Polarity Protection Islanding Protection Over Temperature Protection Arc-Fault ircuit Protection 3.0-UNI 208 V 240 V 277 V 208 V 240 V 277 V 3.8-UNI 5.0-UNI 6.0-UNI 7.5-UNI 4.4 A 2.5 A 0.8 A 8.3 A 5.8 A 3.7 A V (-2 / +0%) V (-2 / +0%) V (-2 / +0%) 24.0A 20.8 A 8. A 28.8 A 25.0 A 2.7 A 36. A 3.3 A 27. A 3.0-UNI 3.8-UNI 5.0-UNI 6.0-UNI 7.5- UNI Internal GFDI (Ground Fault Detector/Interrupter) in accordance with UL and NE Art. 690 Internal Diode Internal; in accordance with UL , IEEE and NE Output power derating / active cooling Internal AFI (Arc-Fault ircuit Interrupter); in accordance with UL 699 Outline of Investigation for Photovoltaic (PV) D Arc-Fault ircuit Protection (Issue Number 2, January 4, 203)

10 TEHNIAL DATA: FRONIUS IG PLUS ADVANED(0.0- UNI,.4- UNI,0.0-3 UNI DELTA,.4-3 UNI DELTA, WYE277) TEHNIAL DATA: FRONIUS IG PLUS ADVANED(0.0- UNI,.4- UNI,0.0-3 UNI DELTA,.4-3 UNI DELTA, WYE277) INPUT DATA UNI.4 - UNI UNI DELTA.4-3 UNI DELTA WYE277 Recommended PV-Power (kwp) Nominal Input urrent 27.6 A 3.4 A 27.6 A 3.4 A 33. A Max. Usable Input urrent 46.7 A 53.3 A 46.7 A 53.3 A 56. A MPPT - Voltage Range V D Startup 260 V Max. Input Voltage 600 V Admissable onductor Size (D) No. 4 to 6 AWG. For larger wire, use Fronius connecting distributor. Max. urrent per D Input Terminal 20 Amps. For higher input current, use Fronius connecting distributor. OUTPUT DATA UNI.4 - UNI UNI DELTA.4-3 UNI DELTA WYE277 Nominal Output Power 9,995 W,400 W 9,995 W,400 W 2,000 W Max. ontinuous Output Power 9,995 W,400 W 9,995 W,400 W 2,000 W A Output Voltage 208 / 240 / / 240 / / / / 277 WYE Number of Phases Admissible onductor Size (A) No. 4-4 AWG Max. ontinuous Utility Backfeed urrent 0A Nominal Output Frequency 60 HZ Operating Frequency Range Hz Total Harmonic Distortion < 3 % Power Factor 0.85 ind. / cap. GENERAL DATA UNI.4 - UNI UNI DELTA.4-3 UNI DELTA WYE277 Max. Efficiency 96.2 Unit Dimension (W x H x D) 7. x 49.7 x 9.9 in. E Efficiency 208 V 95.0 % 95.0 % 95.0 % n.a. 240 V n.a. 277 V n.a. n.a. onsumption in Standby (Night) <.5 W onsumption During Operation 20 W ooling ontrolled forced ventilation, variable speed fan Enclosure Type NEMA 3R Power Stack Weight 84 lbs. (38 kg) Wiring ompartment Weight 26 lbs. (2 kg) Admissible Ambient Operating Temperature -3 o F...+3 o F (-25 o o ) Advanced Grid Features Active and reactive power control, low voltage ride-through UL , IEEE , IEEE 547., UL 699B-203, ANSI/IEEE 62.4, F Part 5 A & B, NE Article 690, ompliance No (Sept. 20) alifornia Solar Initiative - Program Handbook - Appendix : Inverter Integral 5% Meter Performance Specification EFFIIENY UNI.4 - UNI UNI DELTA.4-3 UNI DELTA WYE277 Operating A Voltage Range 208 V V (-2 / +0 %) 240 V V (-2 / +0%) 277 V V (-2 / +0%) Max. ontinuous Output urrent 208 V 48. A 54.8 A 27.7 A* 3.6 A* n.a. 240 V 4.7 A 47.5 A 24.0 A* 27.4 A* n.a. 277 V 36. A 4.2 A n.a. n.a. 4.4 A* PROTETIVE EQUIPMENT UNI.4 - UNI UNI DELTA.4-3 UNI DELTA WYE277 Ground Fault Protection Internal GFDI (Ground Fault Detector/Interrupter) in accordance with UL and NE Art. 690 D Reverse Polarity Protection Internal Diode Islanding Protection Internal; in accordance with UL , IEEE and NE Over Temperature Protection Output power derating / active cooling Arc-Fault ircuit Protection Internal AFI (Arc-Fault ircuit Interrupter); in accordance with UL 699 Outline of Investigation for Photovoltaic (PV) D Arc-Fault ircuit Protection (Issue Number 2, January 4, 203) WE HAVE THREE DIVISIONS AND ONE PASSION: SHIFTING THE LIMITS. Fronius USA LL 6797 Fronius Drive Portage, IN USA pv-usa@fronius.com M,06,0008,EN v0 203 as