(Alarm Valve) & ' ( ()& * +,, & +-,. /0-
|
|
|
- Jesse Lucas
- 5 years ago
- Views:
Transcription
1 (Alarm Valve) กก ก
2 กก ก กก ก (Alarm Valve) ก ก (Alarm Valve) (Alarm Valve) ก ก ก ก กก ก (Alarm Valve) 25 (1 ) 300 (12 ) ก (Alarm Valve) กก 2. กกก ก (Solid Flow System) กก ก ก (Sensitiveness) ก กกกก (Electrical and Mechanical Alarms) ก (Retard Factor) กกกกก ก ก :
3 (Waste of Water) กก ก กกก ก กก ก ก ก ก ANSI/ASME B ก ANSI B ก ANSI V ก ANSI/AWWA C ก ANSI/ASME B Alarm Accessories for Automatic Water-Supply Control Valves for Fire Protection Service, UL ก 4.1 ก ก ก (Size) กกกก ก กกกก (Working Pressures) กก 1,200 กก (Positions) กกก ( ) :
4 4.1.5 (Bodies and Covers) กกกกกก ก ก ก ก (Thermal Shock) กกกก (Flange Class) ก กก (ก) ก ก () ก ANSI/ASME B () ก ANSI B () ก ANSI V ก () ก ANSI/AWWA C207 1,200 กก ก ANSI/ASME B16.5 กก 1,200 กก กกกก ก NFPA13, Standard for the Installation of Sprinkler Systems กก ก กก (Retard Chamber) ก 15 ก ก 20 ก กก ก :
5 ก: (1) (2) ก ก ก ก ก (ก) ก ก () กกก กก ก กกก กก 12.7 (1/2 ) ก กก กก ASTM A กก กก ASTM A563 ก A B ASTM A (Load) กกก 2 กก ASTM A กก ก 5 ก ก (1) กก (Full-face Gasket) (2) ก ก (Ring Gasket) กก กกก กก (Valve Mechanisms) กก กก กกก :
6 กก กก ก ก กกกก Phosphor Bronze กกกกก : (1) กกกก (Monel Metal) (2) กกกกก Inserts กกกกก กก กกก ก (Clapper Supports) (Clapper Arm Bushing) ก (Hinge Pin Bearing) กก 3.2 ก (Side Plug) ก ก ก (Screw Thread) กกกกก ก (Clapper Arm) (Hinge Pin) ก กกก กก กกกกก (Surge) กก ก 4.6 กก 9.5 ก 80 กก ก (Bearing) กกกกก :
7 ก (Hinge-pin Support Bearing) ก (Clapper-arm Bearing) กกก 70 ก ก 7.9 ก กกกกก (Clapper Stops) (Clapper) กกกกก ก กกกก กก (Clapper Rings and Seat Rings) ก กกก กก ก ก กกก กก (Metal Clapper Ring) กก (Body Seating Ring) ก 3.2 (1/8 ) ก 3.2 ก ก 3.2 (1/8 ) ก ก (Dovetailed) ก ก กกก ก ก ก กกกก :
8 กก กกกก (Nonmetallic Materials) ก ก (1) กกกก (2) ก (3) ก (4) ก กกกก (กก) (Clearance) กก กกกกกกก ก ก ก ก ก ก 12.7 ก 6.4 ก ก (Hub of Clapper Arm) ก ก 6.4 กก กก ก กกก ก (Clapper-arm Bearing) ก ก กก (Auxiliary Checks) กก (Bypass) กก กก ก ก/กก :
9 กกกกก กก กก กกก กกกกก กกกก ก กกกกกก กกกก กกกก กก กก กก (Retarding Chambers) กกกกกก กกก ก Phosphor Bronze ก 50,000 ก ก (Hydrostatic Pressure) 2 1 กก กก ก กกกก ก กกก (Orifice) ก 1.6 ก ก ก 20 กก :
10 ก กก ก (Retard Chamber) กก (Alarm Devices) ก กก กกกก กกกกก ก กกก (Alarm Valve) กก (Automatic Sprinkler System) (Water Motor Gong) (Fire Alarm System) ก (Pressure Switch) ก (Zone) กก กก กก (Alarm Valve) ก :
11 3 กก 1. ก ก 3. (Alarm Valve) กกก (ก) ก (Wet Pipe System) กก ( ) กก (Maximum Protection Area Limitations) (System :
12 Riser) (Combined System Riser) ก 1 ก ( ) ก () 4,831 (52,000) ก 4,831 (52,000) ก -Pipe Schedule 2,323 (25,000) -Hydraulically Calculated 3,716 (40,000) () (Dry Pipe System) กกกกก กก 2,839 กกก (System Test Station) ก 60 () (Pre-Action System) กกกกก กก 2,839 กกก (System Test Station) ก 60 () (Deluge System) กกกกกก (Hydraulically Calculated) 4.3 ก ก ก ก (Alarm Valves) ก ก ก (Valve Trim) :
13 ก ก Shut off valve ก กก ก ก ก ก 4.2 ก ก กกก ก (Alarm Valve) กกก (Types of System) ก กกกก 5 ก (ก) กก (Water Motor Gong) ก (Alarm Devices) ก กก 23 (75 ) ก 6 (20 ) () กก (Water Motor Gong) ก () ก () กก 4.4 ก ก (Alarm Valve) กก ก (Seat Disc) ก ก ก (Metallic Materials Test) กก ก ASTM กก (ก.) :
14 ก 50, กกก Hydraulic Cylinder ก 50,000 (Clapper Spring) (Clapper) กก 45 Internal Bypass Spring Bypass ก (Retard Chamber Diaphragms) (Diaphragms) กก กก ก (Nonmetallic Materials Test) ก ก (Clapper facings) (O-rings) (Elastomeric) กก (Gasket) ก ก (Plastic Parts) กก ก ก กกก ก ก กกกก (Full Draft) (Circulating Air Oven) 121 ±1 กก ก (Elastomeric Facing) (ORing) ก ก :
15 กก ก ±2 ก 24 ก (Elastomeric) กก กก (Aging Test) (Full Draft) ก ก ก ก (Fully Open) Type II A Standard Specification for Gravity Convection and Force Ventilation Ovens, ASTM E ก ก กก ก ก กก กก ก ก (Elastomeric) กก (Gasket) (Elastomeric) ก (Seal) ก Standard for Gaskets and Seals, UL 157 (ก) ( PolyOrganoSiloxane ก) (Tensile Strength) ก 3.4 กก (Ultimate Elongation) ก 1 () (Natural Rubber) (Synthetic Rubber) (Tensile Strength) ก 10.3 กก (Ultimate Elongation) ก :
16 (Tensile Strength) ก 15.2 กก (Ultimate Elongation) ก 1 () ก ( (Tensile Strength) (Elongation) ก (Oven Aging) ก ก Standard for Gaskets and Seals, UL 157 กก ก Standard for Gaskets and Seals, UL 157 กก Finished Elastomeric ก (Oring) กก ก (Adhesion Test for Resilient Seat Material) ก (ก) (Clapper Facing) ก Fc ก F c = DPI 4 F C = ก () D = ก () กก Seat Material กก ก 2 P = (Psig) l = Seat Material ก ก ก; () ก F C ก (ก) () กก (Tension Compression Machine) กก () () กกก (Clamp) 90 ก 87 ก :
17 กก (ก) () ก () ก 90 กกกก 1 ก (Tension Compression Testing Machine) () กกก 2.5 (Tensile Force) กก (Resilient Clapper Facing) กก (Seat) ก 34 กก ก A D ก 1 ก :
18 W D OD 2 ก ( 4.4.4) กก (Installation Assembly Test) (Alarm Valve) ก ก ก (Alarm Valve) 1 (Water Motor Alarm) (Alarm Valve) Seat 1.80 กก 20 (3/4 ) กกก (Handhole Openings) ก กก ก ก 150 (6 ) ก (Tension Compression) :
19 กกกก ก ก ก 2 กก 2 ก ( ) ก () 50 (2) (2- ½ ) 1, (3) 1, (4) 2, (6) 4, (8) 6,703 1, (10) 9,950 2, กก ก กก กก ก ก กก กกก (Positiveness of Response and Transmission Test) กกก (Mechanic) กกกก กก ก (Alarm) ก ก (Rated Pressure) กก ก (Reset) กก ( ) :
20 Electric Alarms 34.5 กก Electric Alarms กกกก กกกก (Hydraulic Friction Loss Test) ก กก 20.7 กก ก ก กก กกก (Differential Mercury Gauge) ก (Piezometer) ก กกก กก ก กกก กก กก กก ก ก กก ก ก 1 กก (Seat) ก กกก ก ก ก ก ก 150 (6 ) 5 ก (Maximum Rated Working Pressure) ก 8 4 ก (Maximum Rated Working Pressure) :
21 1 ก (Valve Clapper) ก ก กก กก ก ก ก กก ก ก (ก) กก ( ) ก 1,200 ก ก () 138 กก ก(Maximum Rated Working Pressure) 517 ก ก (Working Pressure) กก 1,200 กก กก 5 ก (Down Stream) (Alarm Valve) 5 ก (Down Stream) กก (Rated Working Pressure) กกก Sprinkler (Nominal Orifice Size) (Service Pressure) (System Pressure) ก กก 90 กก (13 ) ก (Rated Working Pressure) 517 กก (75 ) :
22 กก 5 ก ก (Alarm Valve) กกก กกก ก ก ก ก กก กก ก Special Alarm Port Drain Fitting กก ( กก Alarm Port Drain Fitting) กก ก ก (Bourdon Tube Pressure Gauge) (Manometer) ก กก (Clapper) (Manometer) ก กกก (Clapper) กก (Seat) กก Manometer (Clapper) ก ก กก ก กก ก กก กก ก ก (Retarding Factor) ก (Retarding Factor) (Retard Chamber) 5 90 ก กก ก ก ก :
23 กก ก 0.24 กก ก 3 กก ( ) ก. ก 2 15,100 (4,000 ก) กก (1,000 ก) 1.21 กกก (175 ) ก 200 (8 ) ก. (Gate Valve). 100 (4 ) (2 ½ 4 ) 100 (2 ½ ) 100 (4 ) (3 4 ) 80 (3 ) 100 (4 ) 100 (4 ) 150 (6) 150 (6) 150 (6) (8 6 ) 200 ( 8 ) :
24 (2 ½ 1 ½ ) 65 (2 ½ ) (3 1 ½ ) 100 (4 ) (6 4 1 ½ ) 150 (6) ( ½ ) 200 (8 ). (Retard Chamber). (Manufacturer Pressure Switch). (Water-motor Alarm Gong) 20 (¾ ) ก 22.9 ก 1.8. ก 40 (1 ½ ) 3.7 ±152. กกก 2 ก กก (2 30 ก).. Weigh barrel กกก ก 4 กก ( ) :
25 ก. (Alarm Valve). ก. ก. (Retard Chamber). Close pipe nipple 20 (¾ ) ก (¾ ). 20 (¾ ) (Cross Fitting). Pipe nipple 20 (¾ ) ก (¾ ) (Tee Fitting) กก (0 30 ). Close pipe nipple 20 (¾ ). ¾ (Ball Valve). 20 (¾ ). (Water Motor Alarm) กก (Manufacturing and Production Test) ก กก ก ก กกก ก กก (Rated Pressure) กก ก (Rated Pressure) ก ก 620 กก ก (Downstream) กก (Clapper) ก 4.5 ก ก กก ก :
26 4.5.4 ก ก ก กกกก กกกก ก ก ก กก ก :
27 กก ( 4.5) :. ก ก : ก กก : ก : ก ก : ก กก : : ก : กกก ( ) :
28 :. กกกก กก () ( 4.5) ก ก : ก ( ) :
29 5. ก 5.1 ก (Alarm Valve) (Retarding Chamber) (ก) ก () () ก (Alarm Valve) Retard (Alarm Valve) (ก) (Nominal Size) () (Working Pressure) () 3 6 กก () กก () ก ก ก 5.6 (ก) (ก) () (ก) () () ก 6.4 (1/4 ) ก 80 (3 ) 10 (3/8 ) ก 80 (3 ) ก ก 0.76 กก 1.3 () (Retard Chamber) ก ก 4.8 กก ก () ก (ก) (ก) ก () ก ก (ก) () (ก) (),() :
30 กกก ก 4.8 กก กกก กก ก กก 5.2 ก กก ก UL 193, 2004 Edition; Alarm Valves for Fire-Protection Service, by Underwriters Laboratories Inc., U.S.A UL 753, 2004 Edition; Standard for Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service, by Underwriters Laboratories Inc., U.S.A NFPA 13, 2007 Edition; Standard for the Installation of Sprinkler Systems, by National Fire Protection Association, U.S.A :
TECHNICAL DATA. Wet 26a. February 22, 2009
February 22, 2009 Wet 26a 1. DESCRIPTION The Viking Alarm Check Valve serves as a check valve by trapping pressurized water above the clapper and preventing reverse flow from sprinkler piping. The valve
Discontinued Product
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The Victaulic Series 759 alarm check valve works as a check valve by preventing the reverse flow of water from the system piping to the water supply. The valve
Series 759 FireLock Alarm Check Valve
R IPS CARBON STEEL PIPE FIRE PROTECTION PRODUCTS 10.70 Series 759 FireLock Alarm Check Valve Grooved Grooved PRODUCT DESCRIPTION U L FM U L C See Victaulic publication 10.01 for details. The Victaulic
Instructions for Installation, Operation, Care and Maintenance
Bulletin 422 Model E Alarm Check Valve Bulletin 422 Instructions for Installation, Operation, Care and Maintenance DN100, DN150, DN200 SIZE Model E with E2 Euro Trim The Reliable Automatic Sprinkler Co.,
DARTMOUTH COLLEGE DESIGN November 15, 2007 & CONSTRUCTION GUIDELINES
SECTION 15300 FIRE PROTECTION PART 1 DESIGN DIRECTIVES 1.1 DESIGN CRITERIA A. Dartmouth College is currently insured by Factory Mutual. References to the owner s insurance company in this specification
ALARM VALVE MODEL: SDH-AVA TECHNICAL DATA : OPERATION DESCRIPTION. Flange X Groove Groove X Groove Bar (250 PSI)* WORKING PRESSURE
ALARM VALVE MODEL: SDH-AVA TECHNICAL DA : MINAL SIZE END CONNECTION 200, 50, 00, & 80 Flange X Flange Flange X roove roove X roove MAXIMUM WORKIN PRESSURE THREADED OPENIN MOUNTIN DESCRIPTION 7.5 Bar (250
Model AV Alarm Valve With and Without Model RC-1 Retard Chamber European Conformity Valve Trim General Description
Worldwide Contacts www.tyco-fire.com Model AV--00 Alarm Valve With and Without Model RC- Retard Chamber European Conformity Valve Trim General Description The TYCO Model AV--00 Alarm Valves DN, DN0, DN0,
Model DDX Deluge Valve
Model DDX Deluge Valve Bulletin 510 Bulletin 510 Features 1. Differential type, simple, lightweight, dependable construction. 2. Simply and easily trimmed for releasing by: Manual pull stations Wet pilot
SECTION DRY-PIPE SPRINKLER SYSTEMS
SECTION 21 1300 S PART 1 -GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
DIVISION 21 FIRE SUPPRESSION SECTION FIRE PROTECTION SPECIALTIES
DIVISION 21 FIRE SUPPRESSION PART 1 GENERAL 1.01 DESCRIPTION A. Provide UL listed, FM approved listed fire protection specialties or accessories as required by either the equipment manufacturer or the
DELUGE VALVE MODEL: SD-DVH2 TECHNICAL DATA TRIM DESCRIPTION DESCRIPTION VALVE OPERATION. 82 ASTM A 216 WBC.
DELUGE VALVE MODEL: SD-DVH2 TECHNICAL DATA NORMAL SIZE MATERIAL SEVICE PRESSURE THREADED OPENING MOUNTING FACTORY HYDOSTATIC TEST PRESSURE FLANGE CONNECTION WET PILOT SPRINKLER HEIGHT LIMITATION NET WEIGHT
A. Section includes wet-pipe sprinkler system, system design, installation, and certification.
SECTION 21 13 13 WET-PIPE SPRINKLER SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes wet-pipe sprinkler system, system design, installation, and certification. 1.2 REFERENCES A. General: Comply
SECTION SPRINKLER SYSTEMS
SECTION 13900 SPRINKLER SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
mechanical. OPERATION Rapidrop Global
TECHNICAL DATA : MODEL NOMINAL SIZE MAXIMUM SERVICE PRESSURE A 00, 50, 00 & 80 NB Bar (75 Psi) THREADEDOPENING BSPT ( NPT - Optional ) MOUNTING Vertical FLANGECONNECTION ANSI B6. FF #5 (Optional IS:538)
TotalPac 3 Firecyle III Deluge Remote controlled system
(Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a Firecycle III system trim totally preassembled, pre-wired and factory tested. All electrical
Nitin Ventures FZE. (A Division of Nitin Fire Protection Industries Ltd.)
Model : A TECHNICAL DATA : Model Nominal Size Maximum Service Pressure Threaded Opening Mounting Flange Connection Trim Factory Hydrostatic Test Pressure Frictional Loss in Terms of Equivalent Length of
SECTION DRY PIPE SPRINKLER SYSTEMS MODEL F SERIES DRY VALVE
SECTION 21 1316 DRY PIPE SPRINKLER SYSTEMS MODEL F SERIES DRY VALVE PART 1 GENERAL 1.01 SECTION INCLUDES A. Dry-pipe sprinkler system. B. System design, installation, and certification. C. Fire department
THE JAMES RUSHTON EARLY LEARNING AND FAMILY SUCCESS CENTER #2616 ISSUE FOR CONSTRUCTION
SECTION 21 1301- FIRE-SUPPRESSION SYSTEMS PART 1 - GENERAL 1.1 SUMMARY: A. This Section includes fire-suppression piping and equipment for the following building systems: 1. Wet-pipe, fire-suppression
Datasheet. Vacuum Double-interlock Preaction System, Electric Release Self contained unit. Features. FIREFLEX VACTEC description
FIREFLEX VACTEC description This FIREFLEX VACTEC integrated fire protection system consists of a vacuum system trim totally pre-assembled, prewired and factory tested. All electrical and mechanical components
Datasheet. Dry-pipe Vacuum Sprinkler System, Electric Release Self contained unit. Features. FIREFLEX VACTEC description
FIREFLEX VACTEC description This FIREFLEX VACTEC integrated fire protection system consists of a vacuum system trim totally pre-assembled, prewired and factory tested. All electrical and mechanical components
TotalPac 3 Wet pipe system c/w retard chamber
DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of an integrated wet type sprinkler riser assembly with retard chamber, totally pre-assembled, prewired and
Technical Data TYPE T14 & T14D TEMPERATURE PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4511A T14 PILOT
Technical Data SD 4511A SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE T14 & T14D TEMPERATURE PILOT PRINTED IN U.S.A. SD 4511A/9811 5 13 /16 D 4 7 /8 1 13 /16 T14 PILOT
1.2 CODES AND REGULATIONS A. Sprinkler system design, equipment, materials, devices, and installation shall conform to the following:
SECTION 21 10 00 - WATER-BASED FIRE-SUPPRESSION PART I - GENERAL 1.1 SUMMARY A. Inclusion of sprinkler and standpipe systems shall be as determined by NFPA National Fire Code pamphlet 101 and program statement.
B. The sprinkler system shall be designed to meet the more stringent of the requirements of NFPA 13 and FM Global requirements.
SECTION 21 13 13 FIRE PROTECTION SPRINKLER SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes labor and materials for the installation of a hydraulically calculated automatic, wet-pipe sprinkler
TECHNICAL DATA SINGLE INTERLOCKED PREACTION SYSTEM WITH ELECTRIC RELEASE
Page 1 of 12 1. (Refer to Figures 1-7.) Viking supervised Single-Interlocked Preaction Systems utilize a Viking Deluge Valve and a pneumatically pressurized automatic sprinkler system. The system piping
SECTION AUTOMATIC SPRINKLER PIPING
SECTION 15330 AUTOMATIC SPRINKLER PIPING ****** ***** **** *** ** * ** *** **** ***** ****** NOTE TO SPECIFIER: This section contains several types of automatic sprinkler piping. Some piping is allowed
SECTION DRY PIPE SPRINKLER SYSTEMS MODEL G SERIES DRY VALVE
SECTION 21 1316 DRY PIPE SPRINKLER SYSTEMS MODEL G SERIES DRY VALVE PART 1 GENERAL 1.01 SECTION INCLUDES A. Dry-pipe sprinkler system. B. System design, installation, and certification. C. Fire department
SECTION FIRE-SUPPRESSION STANDPIPES
PART 1 - GENERAL 1.1 DESCRIPTION Fire-suppression wet and manual dry standpipes. 1.2 SCOPE OF WORK SECTION 21 12 00 A. Design, installation and testing shall be in accordance with NFPA 14 except for specified
OPEN SPRINKLER SYSTEM
OPEN SPRINKLER SYSTEM Introduction Competence and innovation driven by consistent market development and customer requirements have shaped the successful development of the SHIELD Brand. The extensive
Model CV-1FR Riser Check Valves 2 to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data. Page 1 of 6 OCTOBER 2010 TFP950
Technical Services 00--9 +-0--0 www.tyco-fire.com Model CV-FR Riser Check Valves to Inch (DN0 to DN00) General Description The TYCO Model CV-FR Riser Check Valve is a compact and rugged swingtype unit
TECHNICAL DATA OBSOLETE
October 10, 2008 Deluge Devices 281a 1. PRODUCT DESCRIPTION The Viking Model C-1 is a rate-of-rise releasing device for use on hydraulic and pneumatic release systems controlling operation of Viking deluge
SECTION FIRE PROTECTION
SECTION 15300 - FIRE PROTECTION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, and Section 15030, ELECTRICAL REQUIREMENTS FOR
SECTION METERS AND GAGES FOR PLUMBING PIPING
SECTION 220519 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
TECHNICAL DATA. Factory Mutual Approval is pending for the system as a whole.
September 8, 2000 Dry 132 a 1. PRODUCT NAME High Pressure Dry System Manufactured 2000-2. MANUFACTURER The Viking Corporation 210 N Industrial Park Road Hastings MI 49058 U.S.A. Telephone: (616) 945-9501
TECHNICAL DATA DOUBLE INTERLOCKED PREACTION SYSTEM WITH ELECTRIC/ PNEUMATIC RELEASE 1. DESCRIPTION 2. LISTINGS AND APPROVALS 3.
Page 1 of 9 1. (Refer to Figures 1-3.) Viking Electric/Pneumatic Double Interlocked Preaction Systems utilize a Viking deluge valve controlled by a pneumatic actuator (E.1), normally held closed by supervisory
Deluge Valves. Model 68 DE\ EL. Electrically Actuated Remote-Reset Deluge Valve. Dorot Fire Protection Division. Certification & compliance by design
Fire Protection Div. Dorot Fire Protection Division Deluge Valves Model 68 DE\ EL Electrically Actuated Remote-Reset Deluge Valve Certification & compliance by design 1 ANSI FCI 70-2 Class VI seat leakage
TotalPac 3 Double interlock Preaction, Electric/PneuLectric release Self-contained system
(Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a preaction system trim totally preassembled, pre-wired and factory tested. All electrical
TECHNICAL DATA. 319a. January 27, 2012
January 27, 2012 319a 1. DEsCrIpTIoN (Refer to Figures 1-3.) Viking Electric/Pneumatic Double Interlocked Preaction Systems utilize a Viking deluge valve controlled by a pneumatic actuator (E.1), normally
SECTION WET-PIPE SPRINKLER SYSTEMS EASY RISER CHECK VALVE
SECTION 21 1313 WET-PIPE SPRINKLER SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. Wet-pipe sprinkler system. B. System design, installation, and certification. C. Fire department connections. 1.02 RELATED
RESEARCH AND TECHNOLOGY BUILDING RENOVATION 05/18/09 SECTION REFRIGERANT PIPING AND SPECIALITIES
SECTION 23 23 00 REFRIGERANT PIPING AND SPECIALITIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Refrigerant piping. 2. Unions, flanges, and couplings. 3. Pipe hangers and supports. 4. Refrigerant
Gas Station & C Store SECTION CWM Job No
SECTION 21 1300 - PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide labor, materials, equipment and services to perform operations required for the complete installation and related Work as required in Contract
SECTION SPRINKLER SYSTEMS
SECTION 15325 SPRINKLER SYSTEMS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Wet-pipe sprinkler systems. B. Preaction sprinkler systems. C. System design, installation, and certification. D. Fire department
SPRINKLERS TABLE OF CONTENTS
SPRINKLERS TABLE OF CONTENTS SECTION 21 13 13 WET PIPE SPRINKLER SYSTEMS SECTION 211313 - WET PIPE SPRINKLER SYSTEMS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract,
University of Delaware
SECTION 23 21 23_HYDRONIC PIPING SYSTEMS ABOVE GRADE PART 1 GENERAL 1.1 SUMMARY University Contact: Energy & Engineering Group (302) 831-1744 This standard includes hydronic piping requirements for both
FIRE SUPPRESSION SPRINKLER SYSTEM
PART 1 GENERAL 1.01 DESCRIPTION A. The provisions of the General Requirements, Supplementary Requirements, and Division 1 apply to the plumbing work specified in this Division. B. The requirements of this
All electrical systems and components require CSA approval stamped on the nameplate of the heater.
/20.0 PURPOSE This specification describes the minimum requirements for design, material of construction, and installation requirements for Automatic Sprinkler Systems for all plants at Vale Operations
CubeSmart Gulf Breeze Storage AUTOMATIC FIRE SPRINKLER SYSTEM
SECTION 21 0000 AUTOMATIC FIRE SPRINKLER SYSTEM PART 1 GENERAL 1.1 QUALITY ASSURANCE A. Codes and Standards: 1. FBC (Florida Building Code 2015) 2. FBC (Florida Fire Code 2015) 3. NFPA #13R (Standard for
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 21 1314D - AUTOMATIC SPRINKLER SYSTEMS (DRY-PIPE) PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
TECHNICAL DATA. model c-2
Page 1 of 6 1. PRODUCT DESCRIPTION The Viking Model C-2 is a rate-of-rise releasing device for use on hydraulic and pneumatic release systems controlling operation of Viking deluge valves on deluge or
Flow Control for Fire Protection
Flow Control for Fire Protection Valve Solutions From An Industry Leader AmesFireWater.com Count on the Fire Protection Leader for Reliable Flow Control Solutions Ames provides a range of high-quality
TOTALPAC2 Integrated Fire Protection System
TOTALPAC2 Integrated Fire Protection System Page 1 of 8 General 1. Applicable Standards The TOTALPAC2 Surefire complies with the following standards: - NFPA-13 Sprinkler Systems; - NFPA-15 Water Spray
SECTION AIR DUCT ACCESSORIES
SECTION 23 33 00 AIR DUCT ACCESSORIES PART 1 - GENERAL 1.1 SUMMARY A. Section includes back-draft dampers, combination fire-and-smoke dampers, duct access doors, fire dampers, smoke dampers, volume control
C. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers.
SECTION 22 10 00 PLUMBING PIPING AND PUMPS PART 1 - GENERAL 1.1 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.
ISO9001:2008 Cert Certified FIRE HYDRANTS. since SFFECO
ISO9001:2008 Cert. 403 Certified FIRE HYDRANTS SFFECO since www.sffeco.com DRY BARREL FIRE HYDRANT Meets all applicable parts of ANSI/AWWA C502 standard UL Listed (EX16453) and FM Approved (FM1510) 250
ACADEMIC SUCCESS CENTER THE COLLEGE AT BROCKPORT STATE UNIVERSITY OF NEW YORK PROJECT NO
SECTION 210523 - GENERAL-DUTY VALVES FOR WATER-BASED FIRE-SUPPRESSION PIPING PART 1 - GENERAL 1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
A. All Fire Suppression System design and installation shall comply with the most current and adopted version of NFPA 13.
21 10 00 PART 1 - GENERAL 1.01 SCOPE A. The following standards and procedures apply to the design and installation of all wet pipe and dry pipe sprinkler systems. The design of fire suppression systems
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 21 1314W - AUTOMATIC SPRINKLER SYSTEMS (WET PIPE SYSTEMS) PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
A. This Section includes the following domestic water piping specialties:
SECTION 221119 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
C. All components of the systems described shall meet the requirements as stated herein and shall be approved by the Architect and Consultant.
SECTION 218800 - FIRE PROTECTION 1. GENERAL A. Provisions of Division 1, GENERAL REQUIREMENTS, and Section 230000, MECHANICAL GENERAL CONDITIONS, and Section 230050, SEISMIC PROTECTION are a part of this
ADDENDUM NO. 3 March 19, 2018
ADDENDUM NO. 3 March 19, 2018 PROJECT: MT. VIEW ELEMENTARY CASSIA SCHOOL DISTRICT NO 151 BURLEY, IDAHO The following addenda apply to the Project Manual and / or Drawings for this project and shall be
B. Standard-Pressure Standpipe Piping: Fire-suppression standpipe piping designed to operate at working pressure 175 psig (1200 kpa) maximum.
Page 211200-1 SECTION 211200 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
esfr dry pendent sprinkler Vk502 (k14.0)
Page 1 of 11 1. DESCRIPTION Viking Early Suppression Fast Response (ESFR) Dry Pendent Sprinkler VK502 is a fast response fusible element type sprinkler designed for use in storage areas subject to freezing
Model CV-1F Grooved End Swing Check Valves. General Description. Technical Data. Installation. Page 1 of 6 FEBRUARY 2016 TFP1550. Worldwide Contacts
Worldwide Contacts www.tyco-fire.com Model CV-F Grooved End Swing Check Valves General Description The TYCO Model CV-F Grooved End Swing Check Valves are compact and rugged swing-type units that allow
TECHNICAL DATA OBSOLETE
January 27, 2012 311a 1. DEsCrIpTIoN (Refer to Figures 1-3.) Viking supervised Single Interlocked Preaction Systems utilize a Viking Deluge Valve and a pneumatically pressurized automatic sprinkler system.
TECHNICAL DATA. Refer to the Approval Chart and Design Criteria for UL and FM Listing/Approval requirements that must be followed.
Page 1 of 10 1. DESCRIPTION Viking Early Suppression Fast Response (ESFR) Dry Pendent Sprinkler VK504 is a fast response fusible element type sprinkler designed for use in storage areas subject to freezing
A. This section includes design and performance information for fire protection and suppression systems.
SECTION 21 00 10: FIRE PROTECTION SYSTEM DESIGN 1. SUMMARY A. This section includes design and performance information for fire protection and suppression systems. 2. GENERAL A. All fire protection materials
N2 BLAST Datasheet Preaction double interlock, Electric/Pneulectric c/w N 2 Blast Nitrogen generating system Self contained unit
Preaction double interlock, Electric/Pneulectric c/w N 2 Blast Nitrogen generating system FireFlex N 2 Blast description The FIREFLEX N2 Blast integrated system consists of an integrated double interlock
TotalPac 3 Single interlock Firecyle III Preaction Self-contained system
(Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a Firecycle III system trim totally preassembled, pre-wired and factory tested. All electrical
PART 1 - GENERAL SECTION FIRE PROTECTION BASIC MATERIALS AND METHODS
FIRE PROTECTION BA SECTION 13910 - FIRE PROTECTION BASIC MATERIALS AND METHODS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler, standpipe and fire hose,
Wayne State University WSU Project No Chatsworth Tower Apts. Misc. Bldg. Upgrades DSD Project No
SECTION 213113 - ELECTRIC-DRIVE, CENTRIFUGAL FIRE PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
SECTION FIRE PROTECTION. A. Examine all conditions as they exist at the project, prior to submitting a bid for the work of this section
PART 1 - GENERAL 1.00 GENERAL PROVISIONS A. Examine all conditions as they exist at the project, prior to submitting a bid for the work of this section 1.01 DESCRIPTION OF WORK A. Work Included: Provide
DIVISION 21 - FIRE SUPPRESSION
DIVISION 21 - FIRE SUPPRESSION DESIGN CRITERIA It is the policy of UC Davis to install fire sprinkler systems in all new construction/facilities. If the building is classified as a pole barn, shed, carport,
TotalPac 3 Deluge, Electric release Self-contained system
(Optional) DESRIPTION This TOTALPA 3 integrated fire protection system by FireFlex Systems Inc. consists of a deluge system trim totally preassembled, pre-wired and factory tested. All electrical and mechanical
FREEDOM RESIDENTIAL CONCEALED HORIZONTAL SIDEWALL SPRINKLER VK480 TECHNICAL DATA
Page 1 of 6 1. DESCRIPTION Viking Freedom Residential Concealed Horizontal Sidewall Sprinkler VK480 is a small high-sensitivity solder link and lever residential sprinkler designed for installation on
N2 BLAST Datasheet Preaction double interlock, Electric/Pneumatic c/w N 2 Blast Nitrogen generating system Self contained unit
FireFlex N 2 Blast description The FIREFLEX N2 Blast integrated system consists of an integrated double interlock Electric/Pneumatic release preaction automatic sprinkler system combined with a Nitrogen
STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Used Fluid Handling Portable Used-Oil Gravity Drains
Portable Used-Oil Gravity Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s)
YARWAY PROCESS THERMODYNAMIC STEAM TRAPS SERIES 40/40D AND C250/260
SERIES 40/40D AND C250/260 Designed for a variety of high pressure and high capacity applications found in utility, industrial and marine service FEATURES Designed to fail open. Designed for superheat
Flow Control for Fire Protection
Flow Control for Fire Protection Valve Solutions From An Industry Leader AmesFireWater.com Count on the Fire Protection Leader for Reliable Flow Control Solutions Ames provides a range of high-quality
SPECIFICATION: ECS SERIES CLEAN AGENT FIRE SUPPRESSION SYSTEM
1. GENERAL SPECIFICATION 1.1. A total flooding, FM-200 fire suppression system, super-pressurized with dry nitrogen shall be installed to meet a minimum design concentration of %, by volume in all designated
2016 CDM Smith All Rights Reserved July 2016 SECTION FIRE PROTECTION - SPRINKLER AND STANDPIPE SYSTEMS
PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 21 13 13 FIRE PROTECTION - SPRINKLER AND STANDPIPE SYSTEMS A. Furnish all labor, materials, equipment services and incidentals required to design and install properly
University of Houston Master Construction Specifications Insert Project Name SECTION DRY-PIPE FIRE SPRINKLER SYSTEM PART 1 - GENERAL
SECTION 21 13 16 DRY-PIPE FIRE SPRINKLER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
Model G5-56 Dry (SIN RA5114) K5.6 (80 metric) Concealed Dry Pendent Sprinkler
UL Quick Response FM Standard Response ½ (13mm) Cover plate Adjustment Features 1. Flat cover plate with threaded attachment. 2. Solid or perforated cover plate available in chrome and white as Standard
DIVISION 21 - FIRE SUPPRESSION
DIVISION 21 - FIRE SUPPRESSION DESIGN CRITERIA It is the policy of UC Davis to install fire sprinkler systems in all new construction/facilities. If the building is classified as a pole barn, shed, carport,
Mercury Plastics New Building February TABLE OF CONTENTS
DIVISION 21: FIRE SUPPRESSION 210500 COMMON REQUIREMENTS FOR FIRE SUPPRESSION 210548 VIBRATION AND SEISMIC CONTROLS FOR FIRE SUPPRESSION PIPING AND EQUIPMENT 211300 WET PIPE FIRE SUPPRESSION SPRINKLERS
STANDARD RESPONSE DRY PENDENT ELO SPRINKLERS TECHNICAL DATA 1. DESCRIPTION 2. LISTINGS AND APPROVALS
Page 1 of 9 1. DESCRIPTION Viking Standard Response Dry Pendent Extra-Large Orifice (ELO) Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. These dry pendent
B. Section Identification for Fire Suppression Piping and Equipment.
SECTION 211300 - FIRE SUPPRESSION SPRINKLERS PART 1 GENERAL 1.1 SECTION INCLUDES A. Dry-pipe sprinkler system. B. System design, installation, and certification. C. Fire department connections. 1.2 RELATED
TECHNICAL DATA DELUGE SYSTEM CONTROLLED BY ELECTRIC RELEASE
Page 1 of 8 1. DESCRIPTION Viking Deluge Systems utilize a Viking Deluge Valve to control the water supply to system piping equipped with open sprinklers and/or spray nozzles. The system piping remains
SECTION WET-PIPE SPRINKLER SYSTEMS
SECTION 21 13 13 WET-PIPE SPRINKLER SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
N2 BLAST Datasheet SUREFIRE double interlock c/w N 2 Blast Nitrogen generating system Self contained unit
SUREFIRE double interlock c/w N 2 Blast Nitrogen generating system FireFlex N 2 Blast description The FIREFLEX N2 Blast integrated system consists of an integrated SUREFIRE double interlock preaction automatic
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION
SECTION 21 05 00 COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 - GENERAL 1.1 SUMMARY A. This section supplements all sections in this division, including pipe, fittings, valves, and connections for sprinkler
UC Santa Cruz Campus Design Guide. Includes the following sections: None DESIGN REQUIREMENTS
DIVISION 21 - FIRE SUPPRESSION Includes the following sections: None DESIGN REQUIREMENTS It is the policy of City of Santa Cruz to install fire sprinkler systems in all new construction/facilities. If
Division 23 - HVAC Switzerland Beallsville K-12. Section HYDRONIC PIPING SECTION HYDRONIC PIPING PART 1 - GENERAL
Division 23 - HVAC 090070 Switzerland Beallsville K-12 Section 23 21 13 HYDRONIC PIPING SECTION 23 21 13 HYDRONIC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the
SECTION SECTION DESIGN REQUIREMENTS
SECTION 26 09 SECTION 23 05 23 DESIGN REQUIREMENTS GENERAL DUTY VALVES GENERAL INFORMATION 1.1 This section applies to valves for hydronic and steam systems. DESIGN REQUIREMENTS 2.1 Design Criteria a.
Used Fluid Handling Portable Used Oil Gravity Drains
Portable Used Oil Gravity Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s)
SPECIFICATION: Kidde Engineered Fire Suppression System Designed for use with 3M Novec 1230 Fire Protection
1. GENERAL SPECIFICATION 1.1 A total flooding, Novec 1230 fluid, fire suppression system, super-pressurized with dry nitrogen shall be installed to meet a minimum design concentration of %, by volume in
TECHNICAL DATA. 31a. September 18, (DN25 - DN50)
September 18, 2009 31a 1. DESCRIPTION Viking EasyPac Residential Riser Manifold Assemblies are available in sizes 1, 1-1/4, 1-1/2, and 2 for NFPA 13D and NFPA13R residential fire sprinkler systems. The
A. NFPA 2001 Standard for Clean Agent Fire Extinguishing Systems 2004 edition.
1. GENERAL SPECIFICATION 1.1 A total flooding, FM-200 fire suppression system, super-pressurized with dry nitrogen shall be installed to meet a minimum design concentration of %, by volume in all designated
TECHNICAL DATA 1. SYSTEM DESCRIPTION 2. SYSTEM OPERATION 3. INSTALLATION. Page 1 of 5
Page 1 of 5 1. SYSTEM DESCRIPTION Viking supervised, single interlocked preaction pre-primed systems utilize a Viking Deluge Valve (A.1) and a hydraulically pressurized automatic sprinkler system. The
The rotary type compressor consists of an integrally formed rotor and shaft, five vanes, and a cylinder.
W1860BE.book Page 12 Tuesday, January 28, 2003 11:01 PM 2. Cooling System A: COMPRESSOR The rotary type compressor consists of an integrally formed rotor and shaft, five vanes, and a cylinder. As the rotor