LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

Transcription

1 OVE n Electrotechnical Association 1010 Wien, Eschenbachgasse 9, ZVR: DVR: OVE Testing & Certification 1190 Wien, Kahlenberger Str. 2A, T F ENEC Certification Body registered under ID # 11. Validity of ENEC Licences can be checked at LICENCE to use the European Mark Licence No Date of issue: Wien, Rev. No. 01 OVE the n Electrotechnical Association as signatory to the "Agreement on the use of a commonly agreed Mark of Conformity for certain electrical equipment complying with European Standards" hereby grants the right to label the products mentioned hereunder and listed in the Annex with the Mark(s) shown above to the following company Licenceholder: Zumtobel Lighting GmbH Product: Luminaires for emergency lighting Trade Mark: Series/Type: Series ECOSIGN Basis for this given right is the conformity of the products with the requirements of the relevant Standard(s) as listed in the Annex and the fulfilment of articles 8 and 9 of the ENEC-Agreement by the manufacturer. This licence refers to the tested specimen and to all products manufactured strictly identical to the submitted one. This licence has been issued under the presumption and conditional on the fact that the licensee holds all necessary legal rights with regard to the product presented for testing and certification. n Electrotechnical Association Head of Testing & Certification Dipl.-Ing. W. Martin OVE Testing & Certification Accredited by the Federal Ministry of Science, Research and Economy as Certification Body for products within the scope as given in the official decree and published under

2 Page 1/4 Hersteller Manufacturer Fertigungsstätte(n) Factory location(s) Zumtobel Lighting GmbH Zumtobel Lighting GmbH Typenbezeichnung Type reference Series ECOSIGN, see page 4/4 of Annex * Prüfbericht Test Report Nationale Bestimmung(en) National Standard(s) Europanorm(en) European Standard(s) TGM-VA EE SFT1/SFT2/SFT3, TGM-VA EE 33793a ECS, MA39-VFA ÖVE/ÖNORM EN : ÖVE-LI/EN :1989 ÖVE/ÖNORM EN : ÖVE/ÖNORM EN 62471: EN : A11:2009 EN :1989 EN : A1: A2:2008 EN 62471:2008 * Ersatz für Zertifikat Superseded licence dated Items modified are marked with an asterisk (*) Anmerkung(en) Remark(s) WMT-procedure

3 Page 2/4 * Nennspannung Rated voltage Anzahl und Leistung der Lampen Rated wattage and number of lamps Lampentyp(en) Lamp identification Schutzgrad Degree of protection Netzanschluß Supply connection Befestigungsfläche Supporting surface Schutzklasse Class of protection Beschreibung des Aufbaus Description of construction * Zusatzinformation Additional information AC V 2 LED-Modules with 6 LEDs each LED IP 65 IP 20 (types ECOSIGN LED TEC...) Screwless terminals or track adaptor Normally flammable surface Cl.I Ceiling or track mounting luminaires for emergency lighting for fixed installation. With housing made of plastic (plastic cover) and equipment rack made of sheet steel. Terminals for looping-in. Light source LED. With electronic control gear (SELV). In combination with track mounting adaptor for TECTON degree of protection IP 20

4 Page 3/4 Bauteil Code Hersteller Typenbezeichnung Konformitätszeichen Component Code Manufacturer Type Reference Mark(s) of conformity * Ballast B Tridonic EM POWER1 ENEC 12 * B Tridonic EM POWER2 ENEC 12 Terminal A Electro Terminal SLK3 450V, 16A, T110 Wiring A Nexans H05V2-U 0,5mm², 105 C Adaptor A Zumtobel V, 6A LED-Module C Nichia S6 1,5W 150x8x2, NS2W ENEC 10 VDE ENEC A B C D The component is replaceable with another one, also certified, with equivalent characteristics. The component is replaceable if authorised by the test house. Integrated component tested together with the appliance. Alternative component.

5 Typecode: Annex to Licence No Rev. 01 Page 4/4 ECOSIGN. LED... Type of Ballast NT1, NT3, NSI, NDA, NPS Type of Lamp LED Mounting position AB... Surface mounting TEC... Tecton track mounting (IP 20) Ballast generation C none Luminaire series Accessories: AW... wall mounting bracket AW wall mounting bracket 90 ASI rope mounting API suspension tube