8 Garda - LED 01A LED_AU_Garda.indd 8 27/12/16 09:57

Transcription

1 8 Garda - LED

2 Garda - LED 9 AMENITIES FIXTURES

3 Garda - LED

4 Garda - LED 11 Housing and arms: pressed in diecast aluminium and designed with a very small surface exposed to wind. Optics: Optics made of PMMA with high temperature resistance and UV rays. AMENITIES FIXTURES Pole connection: pressed in diecast aluminium. Suited for poles with a diameter 60-76mm. Diffuser: extra-clear tempered glass, 4 mm thick, resistant to thermal shocks and impacts (UNI-EN 12-1: 2001). Coating: In different stages. Grey epoxy cationic electrocoating, resistant to corrosive and saline environments. UV stabilized priming using anthracite acrylic resin. UNI EN On request: acetic acid ISO 9227 salt spray coating pursuant to standard UNI EN ISO 9227 Corrosion Tests in Artificial Atmosphere cd/klm cd/klm cd/klm 330 Garda 1 - wide beam 331 Garda 2 - asymmetric ϒ Garda 3 - cycleways cd/klm 333 Garda 4 - cycleways + residential amenities cd/klm ϒ 33 Garda - wide beam Equipment: nylon wiring plate 30% fibre glass complete with connector for mains connection and for LED module. Automatic temperature control inside the device with automatic resetting. With dedicated electronic device to protect the LED module. Equipped with an air-circulation valve. Energy-saving: the possibility to choose the correct drive current for LEDs will allow you to have the right power under specific design conditions, and also help you deal with maintenance and retrofitting problems. Using a lower current will improve the efficiency of fixtures and therefore increase energy savings, whilst a higher current will result in a higher light flux so that you can reduce the number of fixtures. Low Flicker: product with a very low ; uniform light for greater eye protection. 700 Specify pole height. For poles and accessories, see chapter: Poles Table for the various options for managing the supply point 1-V dimming Virtual midnight PLC remote control Adjustment range from %-0% with 1-V Ordered with sub-code -12 Stand alone system with reduction of luminous flux and surge protector 6/ KV Ordered with sub-code Point-to-point and system management and diagnosis system Ordered with sub-code Wi-Fi remote control (to be agreed upon) Point-to-point and system management and diagnosis system with Wi-Fi system on request

5 12 Garda - LED acc. 9 anti-glare shield anthracite To prevent glare effects. To be fitted when Garda is installed near a window. EN EC cd/klm 16 LED 331 Garda 2 - asymmetric LED (Tj=2 C) LED anthracite K lm - CRI 70 LED anthracite K lm - CRI LED On request Power supply n.led W ølm lm 30mA lm 70%.000h (L70B0)

6 EN EC Garda - LED AMENITIES FIXTURES cd/klm ϒ 8 LED 16 LED 332 Garda 3 - cycleways LED (Tj=2 C) LED anthracite K - 223lm - CRI 70 LED anthracite K lm - CRI 70 70%.000h (L70B0) On request Power supply n.led W ølm lm 30mA lm EN EC cd/klm ϒ 16 LED 32 LED 333 Garda 4 - cycleways + residential amenities LED (Tj=2 C) LED anthracite K lm - CRI 70 LED anthracite K lm - CRI 70 70%.000h (L70B0) On request Power supply n.led W ølm lm 30mA lm

7 14 Garda - LED

8 EN EC Garda - LED AMENITIES FIXTURES cd/klm 16 LED 32 LED 330 Garda 1 - wide beam LED (Tj=2 C) LED anthracite K lm - CRI 70 LED anthracite K lm - CRI 70 70%.000h (L70B0) On request Power supply n.led W ølm lm 30mA lm EN EC cd/klm 24 LED 70% h (L70B20) 33 Garda - wide beam LED (Tj=2 C) LED anthracite K lm - CRI 70