Card SN Relay V23030

Transcription

1 Card SN Relay V23030 n n Low profile, therefore particularly suited for flat pack components grouping For relays with or 2 form C (CO) contacts: - creepage and clearance distances between contacts and frame >5mm or >0mm (depending on the relay version) - dielectric strength between contacts and frame 4kVrms or 6kVrms Typical applications measuring and control systems, alarm and security equipment, road traffic and railway signaling systems Contact Data A04 A06 A204 A206 Contact arrangement 4 form C, 6 form C, 4 form C, 6 form C, (4 CO) (6 CO) (4 CO) (6 CO) Max. switching voltage VAC 250VAC 36VAC 36VAC Limiting continuous current 50 C ambient 75 C ambient Limiting making/breaking current 3A) 3A) Contact material Ag, Ag, Gold F2) Gold F2) Au-flashed Au-flashed Contact style bifurcated contacts Frequency of operation, without load max. 30 operations/s Operate / release time approx. 8/2ms Max. DC breaking capacity (contacts Ag, gold flashed) Curve : arc extinguished within contact transit period (limit curve I) Curve 2: safe breaking, erc extinguished (limit curve II) Contact Data (continued) Mechanical endurance aaprox. 08 operations ) The current of 3 A for max 4s at 0% on-time. 2) Gold F on request only 3) Self inductance in accordance with IEC Coil Data Magnetic system Coil voltage range Max. coil temperature Thermal resistance neutral, monostable 5 to 60 0 C 35K/W Coil versions, monostable Coil Rated Operate Limiting Coil Rated coil code voltage voltage Voltage resistance power 4/6 pole Ω±0%4) mw / / / / / ) / ) 878 4) Coil resistance ±5% All figures are given for coil without pre-energization, at ambient temperature +23 C The operating voltage limits UI and UII depend on temperature according to the following formula: UI tamb = ki*ui 20 C, UII tu = kii*uii 20 C; tamb = ambient temperature, UI tamb = minimum voltage at ambient temperature, UII tamb = maximum voltage at ambient temperature, ki and kii are factors. tamb 20 C 30 C 40 C 50 C 60 C 70 C ki kii Insulation Data Electrical endurance Type Load 2.4A, 24, resistive 3A, 24, resistive.35a, 30, resistive 0.85A, 40, resistive 0.36A, 60, resistive 0.2, 0, rersitive 2.4A, 24, resistive+00μh3) 0.6A, 60, resistive+00μh3) 0.24A, 0, resistive+00μh3) , Rev Tyco Electronics Corporation, Operations appr. x06 appr. 0.3x06 appr. 6x06 appr. 2x07 appr. 8x07 appr. 0x07 appr. x06 appr. 0x06 40x06 according to IEC 680- and to be used Initial dielectric strength between coil and frame between contact and contact between contact and frame between contact and coil 500Vrms 000Vrms 000Vrms 000Vrms

2 Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at /customersupport/rohssupportcenter Ambient temperature -40 to +70 C Category of environmental protection IEC 680 RT I - dust protected, RT III - immersion cleanable Degree of protection, IEC IP30, IP67 Terminal type PCB-THT Weight V23030-Axxx approx. 2g V23030-Cxxx approx. 30g V23030-Hxxx approx. 25g V23030-Jxxx approx. 30g Ultrasonic cleaning not recommended Packaging unit 5 pcs. PCB layout / terminal assignment Bottom view on solder pins 4 form C (4 CO) contacts V23030-Axxxx-xx04 V23030-Hxxxx-xx04 6 form C (6 CO) contacts V23030-Axxxx-xx04 V23030-Hxxxx-xx04 Hole M required only for relays with earth connection , Rev Tyco Electronics Corporation, according to IEC 680- and to be used Hole M required only for relays with earth connection.

3 Dimensions V23030-Axxx, 4 form C (4 CO) contacts, dust protected V23030-Hxxx, 4 form C (4 CO) contacts, immersion cleanable V23030-Cxxx, 6 form C (6 CO) contacts, dust protected V23030-Jxxx, 6 form C (6 CO) contacts, immersion cleanable , Rev Tyco Electronics Corporation, according to IEC 680- and to be used 3

4 Product code structure Typical product code V A 02 -A 04 Type V23030 Card SN Relay Contact arrangement A 4 form C, 4 CO, dust proof C 6 form C, 6 CO, dust proof H 4 form C, 4 CO, immersion cleanable J 6 form C, 6 CO, immersion cleanable Earth connection Without earth connection 2 With earth connection Coils Coil code: please refer to coil versions table Contact material A Silver, gold flashed A2 Gold F Contact arrangement 04 4 form C, 4 CO 06 6 form C, 6 CO Other types on request Product code Version Coil Arrangement Enclosure Part number V23030-Axxx, 4 pole, without earth connection, dust protected V23030-A07-A04 4 pole, without earth conn. 2 4 form C (4 CO) Dust protected V23030-A02-A04 4 pole, without earth conn form C (4 CO) Dust protected V23030-A026-A04 4 pole, without earth conn form C (4 CO) Dust protected V23030-A2xxx, 4 pole, with earth connection, dust protected V23030-A202-A04 4 pole, with earth conn. 6 4 form C (4 CO) Dust protected V23030-A207-A04 4 pole, with earth conn. 2 4 form C (4 CO) Dust protected V23030-A207-A204 4 pole, with earth conn. 2 4 form C (4 CO) Dust protected V23030-A202-A04 4 pole, with earth conn form C (4 CO) Dust protected V23030-A2026-A04 4 pole, with earth conn form C (4 CO) Dust protected V23030-A204-A04 4 pole, with earth conn form C (4 CO) Dust protected V23030-Cxxx, 6 pole, without earth connection, dust protected V23030-C07-A04 6 pole, without earth conn. 2 6 form C (6 CO) Dust protected V23030-C02-A04 6 pole, without earth conn form C (6 CO) Dust protected V23030-C02-A204 6 pole, without earth conn form C (6 CO) Dust protected V23030-C026-A04 6 pole, without earth conn form C (6 CO) Dust protected V23030-C2xxx, 6 pole, with earth connection, dust protected V23030-C202-A04 6 pole, with earth conn. 6 6 form C (6 CO) Dust protected V23030-C207-A04 6 pole, with earth conn. 2 6 form C (6 CO) Dust protected V23030-C207-A204 6 pole, with earth conn. 2 6 form C (6 CO) Dust protected V23030-C202-A04 6 pole, with earth conn form C (6 CO) Dust protected V23030-C204-A04 6 pole, with earth conn form C (6 CO) Dust protected , Rev Tyco Electronics Corporation, according to IEC 680- and to be used Datasheets, product data, Definitions section, application notes and all specifications

5 Partner in Electronic Components & Supply Chain Solutions The Netherlands Elektrostraat 7 NL-7483 PG Haaksbergen Tel: +3 (0) Fax: +3 (0) nl@texim-europe.com Denmark Sdr. Jagtvej 2 DK-2970 Hørsholm Tel: Fax: nordic@texim-europe.com Belgium Gentsesteenweg 54-C22 Chaussée de Gand 54-C22 B-082 Brussel / Bruxelles Tel: +32 (0) Fax: +32 (0) belgium@texim-europe.com United Kingdom St. Mary s House, Church Lane Carlton Le Moorland Lincoln LN5 9HS Tel: +44 (0) Fax: +44 (0) uk@texim-europe.com Germany Bahnhofstrasse 92 D-2545 Quickborn Tel: +49 (0) Fax: +49 (0) germany@texim-europe.com Germany Martin-Kollar-Strasse 9 D-8829 München Tel: +49 (0) Fax: +49 (0) germany@texim-europe.com Austria Warwitzstrasse 9 A-5020 Salzburg Tel: +43 (0) Fax: +43 (0) austria@texim-europe.com Texim Europe B.V. Elektrostraat 7 NL-7483 PG Haaksbergen Tel: +3 (0) info@texim-europe.com