DAMPER CONTROL PANELS

Size: px

Start display at page:

Download "DAMPER CONTROL PANELS"

Martin Stewart Barker
6 years ago
Views:

DAPER PANELS TOLE WITH LIHTS () FOR USE WITH COBINATION FIRE/SOKE DAPERS WITH DTO (LS-400) odel: DCP1 Damper Control Panel The DCP1 is a toggle switch operated control panel with position indicator

1 DAPER PANELS TOLE WITH LIHTS () FOR USE WITH COBINATION FIRE/SOKE DAPERS WITH DTO (LS-400) odel: DCP1 Damper Control Panel The DCP1 is a toggle switch operated control panel with position indicator lights for use with Nailor Combination Fire/Smoke Dampers equipped with the DTO Dual Temperature Override Sensor (LS-400) Reopenable Control Option. The DCP1 provides the ability to open or close the damper in a dynamic smoke management system or to test the damper. Indicator lights on the DCP1 panel provide visual confirmation of the damper position. The toggle switch is a 3 position control switch with the following options: NORAL: Damper remains open until closed by the primary heat sensor or smoke detector signal. : Damper closes and remains closed regardless of any sensor signal. RE: The damper opens and remains open (override position) until the secondary hi-limit sensor signals the damper to close and lock. The DCP1 is shipped loose for field mounting and wiring either near the damper or in a remote location. WIRIN DIARAS: DCP1 RE NORAL SOKE PRIARY DTO (LS-400) IF REQUI () 4" x 4" ELECTRICAL BOX () DCP1 RE NORAL SOKE PRIARY DTO (LS-400) IF REQUI () 4" x 4" ELECTRICAL BOX () COBINATION FIRE/SOKE DAPERS / / S1 DAPER S1 DAPER S2 DAPER S2 DAPER OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) DCP1/DTO (LS-400) with Honeywell rotary cam type position indicator package DCP1/DTO (LS-400) with Nailor or Honeywell built-in (actuator auxiliary switches) position indicator package 67

DAPER PANELS KEY WITH LIHTS () FOR USE WITH COBINATION FIRE/SOKE DAPERS WITH DTO (LS-400) odel: DCP2 Damper Control Panel COBINATION FIRE/SOKE DAPERS The DCP2 is a key switch operated control panel

2 DAPER PANELS KEY WITH LIHTS () FOR USE WITH COBINATION FIRE/SOKE DAPERS WITH DTO (LS-400) odel: DCP2 Damper Control Panel COBINATION FIRE/SOKE DAPERS The DCP2 is a key switch operated control panel with position indicator lights for use with Nailor Combination Fire/Smoke Dampers equipped with the DTO Dual Temperature Override Sensor (LS-400) Reopenable Controls Option. The DCP2 provides the ability to open or close the damper in a dynamic smoke management system or to test the damper. Indicator lights on the DCP2 panel provide visual confirmation of the damper position. The key switch is a 3 position control switch with the following options: NORAL: Damper remains open until closed by the primary heat sensor or smoke detector signal. : Damper closes and remains closed regardless of any sensor signal. RE: The damper opens and remains open (override position) until the secondary hi-limit sensor signals the damper to close and lock. The DCP2 is shipped loose for field mounting and wiring either near the damper or in a remote location. WIRIN DIARAS: DCP2 RE NORAL SOKE PRIARY DTO (LS-400) IF REQUI () () DCP2 RE NORAL SOKE PRIARY DTO (LS-400) IF REQUI () 4" x 4" ELECTRICAL BOX 4" x 4" ELECTRICAL BOX () / / S1 DAPER S1 DAPER S2 DAPER S2 DAPER OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) DCP2/DTO (LS-400) with Honeywell rotary cam type position indicator package DCP2/DTO (LS-400) with Nailor or Honeywell built-in (actuator auxiliary switches) position indicator package 68

DAPER PANELS LIHTS ONLY FOR USE WITH ALL SOKE AND COBINATION FIRE/SOKE DAPERS odel: DCP3 Damper Control Panel The DCP3 is a single control panel containing indicator lights only and is for use with

3 DAPER PANELS LIHTS ONLY FOR USE WITH ALL SOKE AND COBINATION FIRE/SOKE DAPERS odel: DCP3 Damper Control Panel The DCP3 is a single control panel containing indicator lights only and is for use with Nailor Smoke and Combination Fire/Smoke Dampers equipped with the LS-300 Position Indicator Package. The green light indicates damper is open and the red light indicates damper is closed. The DCP3 is shipped loose for field mounting and wiring either near the damper or in a remote location. WIRIN DIARAS: DCP3 / LS-300 / S1 DAPER DCP3 LS-300 S1 DAPER COBINATION FIRE/SOKE DAPERS S2 DAPER OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) S2 DAPER OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) DCP3 with LS-300 (Honeywell rotary cam type) position indicator package DCP3 with LS-300 (Nailor or Honeywell built-in aux. switches) position indicator package 69

DAPER PANELS TEST WITH LIHTS (OENTARY) FOR USE WITH ALL SOKE AND COBINATION FIRE/SOKE DAPERS odel: DCP4 Damper Control Panel COBINATION FIRE/SOKE DAPERS The DCP4 is a momentary push button operated

4 DAPER PANELS TEST WITH LIHTS (OENTARY) FOR USE WITH ALL SOKE AND COBINATION FIRE/SOKE DAPERS odel: DCP4 Damper Control Panel COBINATION FIRE/SOKE DAPERS The DCP4 is a momentary push button operated control panel with indicator lights for use with all Nailor Smoke and Combination Fire/ Smoke Dampers. The push button switch provides the ability to cycle test the damper by pushing and holding down the button until the damper has cycled closed. The indicator lights on the DCP4 panel provide a visual confirmation of the damper position when connected to the LS-300 Position Indicator Package. The DCP4 is shipped loose for field mounting and wiring either near the damper or in a remote location. WIRIN DIARAS: DCP4 SOKE ERL/LS-300 IF REQUI () () DCP4 SOKE ERL/LS-300 IF REQUI () () / 4" x 4" ELECTRICAL BOX 4" x 4" ELECTRICAL BOX / S1 DAPER S1 DAPER S2 DAPER S2 DAPER OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) DCP4 for combination fire/smoke dampers with LS-300 (Honeywell rotary cam type) position indicator package DCP4 for combination fire/smoke dampers with LS-300 (Nailor or Honeywell built-in aux. switches) position indicator package 70

DAPER PANELS KEY TEST WITH LIHTS (OENTARY) FOR USE WITH COBINATION FIRE/SOKE DAPERS odel: DCP5 Damper Control Panel The DCP5 is a momentary key switch operated control panel with indicator lights for

5 DAPER PANELS KEY TEST WITH LIHTS (OENTARY) FOR USE WITH COBINATION FIRE/SOKE DAPERS odel: DCP5 Damper Control Panel The DCP5 is a momentary key switch operated control panel with indicator lights for use with all Nailor Combination Fire/Smoke Dampers. The two position spring loaded key switch provides the ability to cycle test the damper by turning and holding the key until the damper has cycled closed. Releasing the key re-energizes the control circuit/actuator and returns the damper to its normal open position. The indicator lights on the DCP5 panel provide a visual confirmation of the damper position when connected to the LS-300 Position Indicator Package. The DCP5 is shipped loose for field mounting and wiring either near the damper or in a remote location. WIRIN DIARAS: DCP5 SOKE ERL/LS-300 IF REQUI () () DCP5 SOKE ERL/LS-300 IF REQUI () () COBINATION FIRE/SOKE DAPERS / 4" x 4" electrical box 4" x 4" electrical box / S1 DAPER S1 DAPER S2 DAPER S2 DAPER OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) OUNTED ON DAPER (FACTORY WIRIN TERINATES AT SPLICE POINTS INDICATED) DCP5 for combination fire/smoke dampers with LS-300 (Honeywell rotary cam type) position indicator package DCP5 for combination fire/smoke dampers with LS-300 (Nailor or Honeywell built-in aux. switches) position indicator package 71

COMBINATION FIRE/SMOKE DAMPERS

MODEL SERIES 1270 (1 1/2 HR.) VEE ROOVE BLADE Model Series 1270 combination fire/smoke dampers, with sturdy veegroove style blades and a rugged mitered corner hat channel frame design that virtually eliminates