ISO TC 204 Intelligent Transport Systems

Size: px
Start display at page:

Download "ISO TC 204 Intelligent Transport Systems"

Transcription

1 ISO TC 204 Intelligent Transport Systems Global ITS standards with a focus on Cooperative Communication Systems 2nd ETSI TC ITS workshop Sophia Antipolis 11/02/2010 András Csepinszky ISO TC204 WG16

2 Agenda Introduction of ISO/TC 204 Introduction of WG16 Status of WG16 work items Next steps Standardization needs

3 Purpose of ISO (International Organization for Standardization) To facilitate international exchange of materials and services To encourage international cooperation of intellectual, scientific, technical, and economical activities

4 ISO Process Preliminary Proposal PWI (Preliminary Work Item) -Examine the item for the standardization at WG NP (New work item Proposal) -Examine the apply range for standardization at WG -NP voting Draw up and Examine WD (Working Draft) at WG Working Committee Inquiry CD (Committee Draft (s)) -Discuss the advise from TG -CD voting DIS (Draft International Standard) -Send DIS to the countries concerned -5 month voting Approval FDIS (Final DIS) -Enroll FDIS -2 month voting Publication Proofreading and Printing Published

5 Voting Procedure Name Member Term Remarks PWI (Preliminary stage) P Member - Greater part of P member NP Voting (Proposal stage) P Member Within 3 month Greater part of voted P member and the declaration of positive participation from more than 5 P member CD Voting (Committee stage) P Member 3 4 month There is a consensus as the principle. If it is not obtain, it is necessary to obtain more than 2/3 approval of P member DIS Voting (Inquiry stage) Representatives of All countries Within 5 month More than 2/3 approval of P member voting and less than 1/4 opposite of total voting FDIS Voting (Approval stage) Representatives of All countries Within 2 month More than 2/3 approval of P member voting and less than 1/4 opposite of total voting Note: P member is participating member, O member is observing member.

6 ISO/TC204 Chairman (U.S.) Structure of ISO/TC204 WG name WG1:Architecture WG3:ITS データベース技術 Database Technology Convener country UK 日本 Japan Secretariat:TIA(U.S.) (Telecommunications Industry Association) WG4:Automatic Vehicle Identification WG5:Electronic Fee Collection WG7:General Fleet Management WG8:Public Transport WG9:Integrated Transport Information Management WG10:Traveler 旅行者情報 Information Systems WG11:Route Guidance and Navigation Systems WG14:Vehicle/Roadway Warning and Control Systems WG15:Dedicated Short-Range Communications WG16:Wide 広域通信 Area Communication WG17:Nomadic ノーマディックデバイス device WG18:Cooperative Systems Norway Sweden Canada USA Australia Germany Vacant seat Japan Germany USA Korea Korea Germany

7 Members of ISO/TC204 Participating members (25): Take part in conferences and play an active role in operations with a voting requirement Algeria, Australia, Austria, Belgium, Brazil, Canada, China, Czech, France, Germany, Hungary, India, Italy, Japan, South Korea, Malaysia, Netherlands, Norway, Russia, South Africa, Spain, Sweden, Switzerland, United Kingdom, United State Observing members (29): Follow operations as an observer with the right to submit comments and take part in conferences Benin, Chile, Colombia, Croatia, Cuba, Cyprus, Denmark, Egypt, Finland, Greece, Hong Kong, Indonesia, Iran, Ireland, Israel, New Zealand, Pakistan, Philippines, Poland, Romania, Serbia, Singapore, Slovakia, Sri Lanka, Thailand, Trinidad and Tobago, Turkey, Ukraine, Uruguay

8 Structure of ISO/TC204 WG16 ISO/TC204 WG16 Chairman (U.S.) SWG SWG0:Architecture WG3:ITS SWG1:Media データベース技術 name Convener K. Evensen 日本 H-J. Fischer SWG2:Networking H. Wakayama SWG3:Probe Data M. Sato SWG4:Application Management SWG5:Emergency Communications SWG6:Non-IP Networking WG10: 旅行者情報 SWG7:LI Security M. Ohyama B. Williams S. Takaaki S. Cadzow

9 Family of standards at ISO/TC204 WG16

10 ISO/TC204 WG16 SWG16.0 Architecture ISO Work Item Title Target Dates Started Project Leader Project Control FDIS CALM Architecture FDIS: IS: DIS CALM Management FDIS: IS: K Evensen knut.evensen@qfree.com K Evensen knut.evensen@qfree.com FDIS ballot was started on 14 January DIS ballot ended on 24 September Results: Yes 13; Yes with comments 5; Abstain 4; No 2. Next step: FDIS ballot.

11 ISO/TC204 WG16 SWG16.1 Media I. ISO Work Item Title Target Dates Started Project Leader Project Control NP IS CALM receiving public broadcast communications CALM using 2G Cellular Systems R Williams bw_csi@fastmail.fm R Williams bw_csi@fastmail.fm NP/CD ballot ended on 4 September Results: Yes 9; Yes with comments 4; Abstain 6; No 1. Next step: DIS ballot. Published standard IS CALM using 3G R Williams Published standard Cellular Systems bw_csi@fastmail.fm IS CALM IR R Williams bw_csi@fastmail.fm PWI CALM IR Rev R Williams bw_csi@fastmail.fm DIS CALM M FDIS: IS: DIS CALM Millimetre, Physical Layer FDIS: IS: K Evensen knut.evensen@qfree.com M Fujise fujise@nict.go.jp Standard is under revision CD ballot was approved by TC 204 Barcelona plenary. Next step: CD ballot. DIS ballot ended on 24 September Results: Yes 12; Yes with comments 6; Abstain 3; No 3. Next step: FDIS ballot. DIS ballot ended on 24 September Results: Yes 18; Yes with comments 0; Abstain 6; No 1. Next step: FDIS ballot.

12 ISO Work Item ISO/TC204 WG16 SWG16.1 Title Media II. Target Dates Started Project Leader Project Control PWI CALM Millimetre, A Dearlove PWI has been registered by MAC-related alan@copseycomms.com retransmitted to ISO CS. ISO CS. Form4 should be Parameters IS CALM Networking HJ Fischer Published standard - Lower Layer HJFischer@fischertech.de SAPs IS CALM MAIL K Koga Published standard k- koga@da.jp.nec.com IS CALM ITS using Public Wireless Networks - General requirement H Cho hbcho@etri.re.kr Published standard PRF PRF CALM MWB using IEEE CALM MWB using HC-SDMA PWI CALM Millimetre, MAC-related Parameters IS: H Cho hbcho@etri.re.kr IS: K Murakami kazuhiro.murakami. xm@kyocera.jp A Dearlove alan@copseycomms.com Direct publication was approved by TC204 Chiang Mai plenary. Draft was submitted to TC204 on 25 October Proof is under review. Direct publication was approved by TC204 Chiang Mai plenary. Draft was submitted to TC204 on 22 October Proof is under review. PWI has been registered by ISO CS. Form4 should be retransmitted to ISO CS.

13 ISO/TC204 WG16 SWG16.1 Media III. ISO Work Item Title Target Dates Started Project Leader Project Control CD CALM Applications using Satellite DIS: FDIS: IS: R Williams bw_csi@fastmail.fm Next step: DIS ballot. DIS CALM Applications using FDIS: IS: K Murakami kazuhiro.murakami. xm@kyocera.jp DIS ballot ends on 20 April 2010

14 ISO/TC204 WG16 SWG16.2 Networking ISO Work Item Title Target Dates Started Project Leader Project Control DIS CALM IPv6 Networking FDIS: IS: H Wakayama hiwakaya@microsoft.com DIS re-ballot ended on 9 January 2010.

15 ISO/TC204 WG16 SWG16.3 Probe data ISO Work Item Title Target Dates Started Project Leader Project Control IS FDIS Vehicle Probe Data for Wide Area Communication Basic Principles for personal data protection in probe vehicle information systems CD TS Probe Data Reporting Management NP Event based Probe Vehicle Data T Kishi tkishi@jaict.ac.jp FDIS: IS: FDIS: IS: CD: DIS: FDIS: IS: Y Watanabe riho-m@cuc.ac.jp S Sprouffske ssprouffske@swri.or g M Hauschild Martin.hauschild@b mw.de Published standard FDIS Ballot started on 8 February DTS ballot ended 30 December Results: Yes 14; Yes with comments 1, Abstain 4, No 0. Direct publication was approved by TC204 Barcelona plenary. Draft and figures were submitted to TC204 on 18 November Waiting for proof. CD ballot was approved by TC204 Chiang May plenary. CD ballot time extension was approved by TC204 Barcelona plenary. New CD ballot target date was requested by TC204 on 9 December New target date is 12 February 2010.

16 ISO Work Item IS IS :2008 ISO/TC204 WG16 SWG16.4 Application management Title TICS Wide Area Communication Message Management Information CALM Application Management Target Dates Started Project Leader H Wakayama hiwakaya@microsoft.com Project Control ISO CS extended the life time of the standard M Ohyama Published standard masumi.ooyama@nif ty.com DIS CALM Application FDIS: M Ohyama DIS ballot ended on 22 Management IS: masumi.ooyama@nif November Results: Conformance Test ty.com Yes 13; Yes with comments 1; Abstain 9; No 0. Next step: direct publication.

17 ISO/TC204 WG16 SWG16.5 Emergency communication ISO Work Item Title Target Dates Started Project Leader Project Control IS ITS Safety and Emergency Notifications using any Available Wireless Media - Data Registry R Williams bw_csi@fastmail.fm Published standard

18 ISO/TC204 WG16 SWG16.6 Non-IP networking ISO Work Item Title Target Dates Started Project Leader Project Control DIS CALM non-ip Communication Mechanisms FDIS: IS: T Sugiura takaaki@mri.co.jp DIS ballot ended on 24 January 2010

19 ISO Work Item ISO/TC204 WG16 SWG16.7 Title PRF TR Lawful Interception in ITS and CALM LI Security Target Dates FDIS: IS: Started Project Leader S Cadzow scott@cadzow.com Project Control Direct publication was approved by TC204 Chiang Mai plenary. Draft was submitted to TC204 on 22 October Title change was requested by ISO CS and approved by editor on 10 November Waiting for proof. CD TR Data retention for FDIS: S Cadzow Direct publication was law enforcement IS: scott@cadzow.com approved by TC204 in ITS and CALM Barcelona plenary. Draft is circulated internally. PWI CALM Security Part 1: Framework PWI CALM Security Part 2: Threat Vulnerability and Risk Analysis PWI CALM Security Part 3: Objectives and Requirements PWI CALM Security Part 4: Countermeasures S Cadzow scott@cadzow.com S Cadzow scott@cadzow.com S Cadzow scott@cadzow.com S Cadzow scott@cadzow.com Item registered by ISO CS 11 December Form4 should be retransmitted to ISO CS. Item registered by ISO CS 11 December Form4 should be retransmitted to ISO CS. Item registered by ISO CS 11 December Form4 should be retransmitted to ISO CS. Item registered by ISO CS 11 December Form4 should be retransmitted to ISO CS.

20 ISO/TC204 WG16 development summary I. 1996: first work item registered 2001: 5 new work items registered 2005: 7 new work items registered 2006: 8 new work items registered 2007: 7 new work items registered 2008: 7 new work items registered 2010: 4 new work items are expected to be registered

21 ISO/TC204 WG16 development summary II. Published standards 2006: ISO published 2 WG16 standards 15662, : ISO published 4 WG16 standards 21212, 21213, 21218, : ISO published 4 WG16 standards 22837, 24103, 24978, Number of expected publications for WG16 standards are expected to be published 11766, 11769, 21210, 21215, , 21217, 24102, 25112, 25113, 25114, 29281

22 ISO/TC204 WG16 objectives for 2010 To wrap up the work on the draft work items To get the standards published

23 ISO/TC204 WG16 needs for the future Reliable test standards for the published WG16 standards such as: ETSI TS for ISO/IS ETSI TS for ISO/IS ETSI TS for ISO/IS 24102

24 Make standardization experience available to stakeholders Building on the past esafety Support activities Intelligent Car Support will support the implementation of actions and recommendations of the esafety Forum and the Intelligent Car Initiatives Follow-up the deployment of esafety and Intelligent Car key technologies Organise esafety Forum and Intelligent Car meetings Monitor the implementation of esafety recommendations Support & coordinate ITS standardisation activities Launch minor studies on topics identified by the esafety Forum Support the EeIP and contribute to the deployment of ecall service

International standards used locally worldwide ISO/TC 67

International standards used locally worldwide ISO/TC 67 / International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie

More information

STANDARDISATION OF SRF (ISO/TC 300)

STANDARDISATION OF SRF (ISO/TC 300) STANDARDISATION OF SRF (ISO/TC 300) Mikko Talola Chairman of CEN/TC 343 & ISO/TC 300 Workshop Production and utilisation options for Solid Recovered Fuels EUBCE 2018 Copenhagen, Denmark May 17, 2018 SRF

More information

Yoshikazu Tanabe On behalf of Mr.Shigeo AIBA

Yoshikazu Tanabe On behalf of Mr.Shigeo AIBA ESF-International Spring Makers Conference Report of ISO/TC 227 April 6 th 2016 Yoshikazu Tanabe On behalf of Mr.Shigeo AIBA President of Toyoshima Co.,Ltd Chairman of Mirror committee (JSMA) 1 / 10 Contents

More information

International Standards Health Informatics. Audrey Dickerson, RN, MS ISO/TC 215 Secretary

International Standards Health Informatics. Audrey Dickerson, RN, MS ISO/TC 215 Secretary International Standards Health Informatics Audrey Dickerson, RN, MS ISO/TC 215 Secretary Objectives To appreciate the global role of standards in our lives To understand the role of international HIT standards

More information

Installation Instructions

Installation Instructions Installation Instructions About This Document Use this document to install the 1784-PCM4/B cable. This cable connects the 1784-PCMK/B card to an SLC 5/01, 5/02, or 5/03 processor or a 1747-AIC link coupler

More information

Status report to ISO/TC204 October 2012

Status report to ISO/TC204 October 2012 [CEN/TC278/WG1 N1658] CEN/TC278/WG1 & ISO/TC204/WG5 Status report to ISO/TC204 October 2012 Jesper Engdahl Jesper Engdahl, WG Convenor Rapp Trans AG Hochstrasse 100 CH-4018 Basel, Switzerland Phone: +41

More information

Accuracy counts! Sensors with analog output

Accuracy counts! Sensors with analog output Accuracy counts! Sensors with analog output Company Contrinex is a leading international high-tech sensor company with headquarters in Switzerland. Contrinex offers quality and highly innovative sensing

More information

Manusa Automatic. Doors. Safety beyond the Standard. EN16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods.

Manusa Automatic. Doors. Safety beyond the Standard. EN16005 Power operated pedestrian doorsets. Safety in use. Requirements and test methods. Manusa Automatic Doors. Safety beyond the Standard. Visual guide of Standard compliance in Manusa automatic sliding doors. Power operated pedestrian doorsets. Safety in use. Requirements and test methods.

More information

Weishaupt WKmono 80. The next-generation burner for ratings up to kw. That s reliability

Weishaupt WKmono 80. The next-generation burner for ratings up to kw. That s reliability Weishaupt WKmono 80 The next-generation burner for ratings up to 17 000 kw That s reliability Weishaupt WKmono 80: The next-generation monobloc burner The powerful output offered by the new WKmono 80 burner

More information

BFD Light Curtains The new choice for cutting edge safety for industrial doors

BFD Light Curtains The new choice for cutting edge safety for industrial doors BFD Light Curtains The new choice for cutting edge safety for industrial doors The BFD Series light curtains are designed specifically for the industrial door market, as they provide a new safety sensor

More information

High vacuum guide FOR PRE-SEPARATORS AND CYCLONES

High vacuum guide FOR PRE-SEPARATORS AND CYCLONES High vacuum guide FOR PRE-SEPARATORS AND CYCLONES High vacum guide for pre-separators and cyclones System description Nederman Pre-separation and Vacuum Transportation Systems pre-separate and discharge

More information

A WMIA Partner of the Year Winner S-Series Enclosureless Dust Collector

A WMIA Partner of the Year Winner S-Series Enclosureless Dust Collector A WMIA Partner of the Year Winner S-Series Enclosureless Dust Collector Nederman S-Series BR-11112-0323 The S-Series up to 5,000 CFM Suitable for collection of many different types of dust including wood,

More information

PTG, SWT Series. Heat Recovery Systems

PTG, SWT Series. Heat Recovery Systems PTG, SWT Series Heat Recovery Systems Hot air exhaust in summer Shutter Ducting system Available hot air Fresh air inlet Compressor Because of the enclosed, compact construction of screw compressors, it

More information

Welcome and breaking the ice!

Welcome and breaking the ice! Welcome and breaking the ice! Janet Mifsud Vice-President (Europe) International Bureau for Epilepsy Member, Joint Task Force, Epilepsy Advocacy Europe Overview Overview 17.00 Welcome and breaking the

More information

CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved

CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved CEN/TC 256 Overview Presentation to ISCC January 2017 C Cork Chair CEN/TC 256 Overview of presentation CEN/TC 256 Organisation Developments in 2016 Key outputs Activities for 2017 2 CEN/TC 256 Committee

More information

Future development of the furniture industry A look at the next 3-5 years

Future development of the furniture industry A look at the next 3-5 years Tappi-Symposium at interzum 2007 on May 7, 2007 Future development of the furniture industry A look at the next 3-5 years Dirk-Uwe Klaas - Managing Director Hauptverband der Deutschen Holzindustrie e.v.

More information

ISO/TC 215 N RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2. Date of document: Expected action: Background:

ISO/TC 215 N RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2. Date of document: Expected action: Background: ISO/TC 215 N 2473 ISO/TC 215 Health informatics Email of secretary: Diana.warner@ahima.org Secretariat: ANSI (United States) RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2 Document type: Resolution Date

More information

Compact FREME. flash recovery energy management equipment HEAT TRANSFER SOLUTIONS

Compact FREME. flash recovery energy management equipment HEAT TRANSFER SOLUTIONS Compact FREME flash recovery energy management equipment HEAT TRANSFER SOLUTIONS spirax FREME Spirax Compact FREME Flash steam and condensate heat recovery system Spirax Compact FREME (Flash Recovery Energy

More information

Forces @ work 2 Forces@work Forces@work The collection in brief Today s office environment is not only a place of work, it is also a place in which many of us spend most of our waking hours. In some aspects,

More information

Advantages of automatic boiler bottom blowdown

Advantages of automatic boiler bottom blowdown ABV20 DFG300A Our solution The Spirax Sarco automatic boiler bottom blowdown system is designed to be efficient and cost effective. The system comprises a BT1000 cyclic timer and an actuated ABV20 or a

More information

Beckhoff short profile

Beckhoff short profile Beckhoff short profile Beckhoff implements open automation systems based on PC Control technology The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and automation software

More information

AutoM Click to go to the page. AutoM Auto Shaker Filter

AutoM Click to go to the page. AutoM Auto Shaker Filter AutoM.0111.4 Click to go to the page AutoM Auto Shaker Filter The Auto M (500-6,500 CFM) Suitable for various applications that generate light to medium volumes of dry dust ATEX Compliant Applications:

More information

Leading manufacturer of high-end ball valves and pneumatic actuators. Over 60 years experience with industrial applications

Leading manufacturer of high-end ball valves and pneumatic actuators. Over 60 years experience with industrial applications Company profile Leading manufacturer of high-end ball valves and pneumatic actuators Over 60 years experience with industrial applications We develop, manufacture and market our products HABONIM tailor-made

More information

KNX The worldwide STANDARD for home and building control. KNX Association International

KNX The worldwide STANDARD for home and building control. KNX Association International KNX The worldwide STANDARD for home and building control KNX Association International KNX is the Standard CENELEC EN 50090 the only European Standard for Home and Building Electronic Systems (HBES) based

More information

CRA24-B3 controlled residential ventilation

CRA24-B3 controlled residential ventilation controlled residential ventilation Table of contents Overview of controlled residential ventilation 3 Damper control for a balanced air volume 4 VAV control system for a defined room temperature 7 Complete

More information

The advantages of closed heating systems. White paper

The advantages of closed heating systems. White paper The advantages of closed heating systems White paper Flamco B.V. December 2016 Closed versus open Heating Systems Heating and cooling installation use water for the energy transfer because it s the most

More information

KNX The worldwide STANDARD for home and building control. KNX Association International

KNX The worldwide STANDARD for home and building control. KNX Association International KNX The worldwide STANDARD for home and building control KNX Association International KNX is the Standard CENELEC EN 50090 the only European Standard for Home and Building Electronic Systems (HBES) based

More information

ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Athens, Greece

ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Athens, Greece ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Athens, Greece By jouko.vaskimo@aalto.fi ISO/TC 258, the Technical Committee (TC) of the International Organization

More information

Press Release. Short profile Beckhoff. Short profile February 2009 Page 1 of 6

Press Release. Short profile Beckhoff. Short profile February 2009 Page 1 of 6 Page 1 of 6 Short profile Beckhoff Beckhoff implements open automation systems based on PC Control technology. The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and

More information

Fire-Resistant. Automatic Doors

Fire-Resistant. Automatic Doors Fire-Resistant Automatic Doors 1 2 Automatic fire- resistant door. Hotel sector. Created in 1966, Manusa is a leading company in the market of automatic doors thanks to the development of its own technology

More information

STT 3000 Series STT250 /150 Surge Protection Device Specifications

STT 3000 Series STT250 /150 Surge Protection Device Specifications STT 3000 Series STT250 /150 Surge Protection Device Specifications Part Number: 46188660-501 EN2I-6061 June 2011 Introduction This device is designed to give the Smart Temperature Transmitter maximum protection

More information

About European Standards

About European Standards About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization

More information

STANDARD T6 (200 C) SENSOR CABLE RANGE

STANDARD T6 (200 C) SENSOR CABLE RANGE STANDARD T6 (200 C) SENSOR CABLE RANGE for the Automotive Industry TE AUTOMOTIVE /// PRODUCT SHEET STANDARD T6 (200 C) SENSOR CABLE RANGE for the Automotive Industry High-performance automotive wire In

More information

LEADERSHIP FOR GROWTH GOSH, April 2016 METRO AG 2016

LEADERSHIP FOR GROWTH GOSH, April 2016 METRO AG 2016 LEADERSHIP FOR GROWTH GOSH, April 2016 METRO AG 2016 MADE FOR SUCCESS: METRO GROUP AT A GLANCE. One of the world s leading retail and wholesale companies Successful stock-listed company Presence in over

More information

COMBIFAB F Fan The flexible fan for dust extraction systems in all industries

COMBIFAB F Fan The flexible fan for dust extraction systems in all industries COMBIFAB F Fan The flexible fan for dust extraction systems in all industries Combifab F Fan Our Combifab F range of fans consists of four different fans solving all kinds of dust extraction applications

More information

Signal converters SVE4 Product overview

Signal converters SVE4 Product overview Signal Converters SVE4 Signal converters SVE4 Product overview Signal input range 0 10 V, 0 20 ma or for position sensors SMH-S1-HG Switch output 2x PNP or 2x NPN Switching function freely programmable

More information

Contents. +0 % VS 2016 On page 1 you will find the key indicators at a glance : chains in the country: 2016 and 2017 sales, number of stores,,

Contents. +0 % VS 2016 On page 1 you will find the key indicators at a glance : chains in the country: 2016 and 2017 sales, number of stores,, Contents Section : Global Analysis This section aims to provide an overview of the global DIY market : Global market size evolution Main regions: market sizes, evolution, average DIY expenditure per capita

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide quality 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr D P Koek

More information

The term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013.

The term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013. ISO/TC 135 N 476 Non-destructive testing Our Date: 2013-10-15 Number of Pages:9 (Incl. this page.) To: Cc : ISO Central Secretariat P-members and O-members of ISO/TC 135 Chairmen and Secretaries of ISO/TC

More information

ISO/TC 249: past, present and future

ISO/TC 249: past, present and future ISO/TC 249: past, present and future Mr David Graham Chair of ISO/TC 249 6 December 2012 THE PAST History of ISO/TC 249 ISO/TC proposed by SAC at 45 th TMB, June 2009 Preliminary meeting August 2009, Beijing

More information

EUROPEAN COMMISSION HEALTH & CONSUMER PROTECTION DIRECTORATE-GENERAL RAPEX Report

EUROPEAN COMMISSION HEALTH & CONSUMER PROTECTION DIRECTORATE-GENERAL RAPEX Report EUROPEAN COMMISSION HEALTH & CONSUMER PROTECTION DIRECTORATE-GENERAL Directorate B - Consumer Affairs B3 - Product and service safety RAPEX Report Background The Rapid Alert System for non-food consumer

More information

The national standards bodies of:

The national standards bodies of: EN 1317 for Vehicle Restraint Systems (VRS) - overview presented by B. Wolfgang Wink Senior Manager International Division Volkmann & Rossbach Germany 16th World Meeting International Road Federation Lisboa

More information

Value engineering developed from global experience

Value engineering developed from global experience Corporate Profile Value engineering developed from global experience Design and Engineering Capabilities With more than 50 years of experience as a solution provider, EagleBurgmann Expansion Joint Solutions

More information

Foreword. A completely revised report for quicker and easier access to key information

Foreword. A completely revised report for quicker and easier access to key information 2017 Foreword A completely revised report for quicker and easier access to key information Following a completely revised edition in 2016, we introduce the 2017 DIY / Home Improvement Global Report. We

More information

Textile fire protection closures EI 30/90

Textile fire protection closures EI 30/90 Textile fire protection closures EI 30/90 Hidden Shield EI 30 Hidden Shield EI 90 10. World Novelty and this has already been awarded! Double / two-sided fire protectionroller shutter construction > EI60

More information

D R A F T. ISO/TC 211 N 31xx. ISO/TC 211 Geographic information/geomatics Number of pages: 9

D R A F T. ISO/TC 211 N 31xx. ISO/TC 211 Geographic information/geomatics Number of pages: 9 D R A F T ISO/TC 211 N 31xx 2011-05-27 Number of pages: 9 ISO/TC 211 Geographic information/geomatics Title: Source: Resolutions from the 32nd ISO/TC 211 plenary meeting in Delft, The Netherlands, 2011-05-26/27

More information

Detect. React. Benefit. Increase the availability of your plants with SIMATIC Notifier!

Detect. React. Benefit. Increase the availability of your plants with SIMATIC Notifier! Detect. React. Benefit. Increase the availability of your plants with! Unrestricted Siemens AG 2019 siemens.com/simatic-notifier New milestones of productivity with SIMATIC Notifier Page 2 Detect React

More information

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods INTERNATIONAL STANDARD ISO 7458 Second edition 2004-03-01 Glass containers Internal pressure resistance Test methods Récipients en verre Résistance à la pression interne Méthodes d'essai Reference number

More information

Labeling and Identification Products

Labeling and Identification Products Labeling and Identification Products 25 Year System Performance Coverage* We are confident that your AMP NETCONNECT cabling system will keep performing to current TIA/EIA industry standards. If the registered

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 16410-1 October 2011 ICS 35.240.60; 03.220.20 English Version Electronic fee collection - Evaluation of equipment for

More information

Forum for European Electrical Domestic Safety FEEDS. B. DOME FISUEL

Forum for European Electrical Domestic Safety FEEDS. B. DOME FISUEL Forum for European Electrical Domestic Safety FEEDS B. DOME FISUEL Benoit.dome@gmail.com Twitter @FisuelEU Agenda 1. Participants 2. Objectives 3. White Paper 4. Conclusions 1.Participants Consumer Association

More information

Knowledge Management Section ANNUAL REPORT

Knowledge Management Section ANNUAL REPORT Knowledge Management Section ANNUAL REPORT 2016-2017 Introduction Professional Units must prepare an Annual Report each year. It has been agreed by the Governing Board that this can cover the period September

More information

CEN/TC 442 Decisions taken /16

CEN/TC 442 Decisions taken /16 CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct

More information

International Product Compliance and Certifications. Product Safety Consulting, Inc.

International Product Compliance and Certifications. Product Safety Consulting, Inc. International Product Compliance and Certifications - USA - Canada - Europe - Other International - CB Scheme Agenda This was the only mark. Now, these are the marks A bit of history.. UL founded in 1894

More information

Contact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status:

Contact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status: Date 2007-11-26 Supersedes document Reference number ISO/TC 224 N 360 This document is still under study and subject to change. It should not be used for reference purposes. ISO/TC 224 Title: Service activities

More information

Heinz Lux. Director, KNX

Heinz Lux. Director, KNX Heinz Lux Director, KNX 234 KNX Manufacturers in 30 countries The worldwide STANDARD for Home and Building Control KNX is the STANDARD CENELEC EN 50090 the only European Standard for Home and Building

More information

English version. Management Centre: Avenue Marnix 17, B Brussels

English version. Management Centre: Avenue Marnix 17, B Brussels TECHNICAL REPORT CLC/TR 62061-1 RAPPORT TECHNIQUE TECHNISCHER BERICHT August 2010 ICS 13.110; 25.040.99; 29.020 English version Guidance on the application of ISO 13849-1 and IEC 62061 in the design of

More information

Rotary Screw Compressors SXC»Compact«Series

Rotary Screw Compressors SXC»Compact«Series www.kaeser.com Rotary Screw Compressors SXC»Compact«Series With the world-renowned SIGMA PROFILE Air delivery 0.6 to 0.0 m /min, Pressure 5 What do you expect from your compressed air system? Compressed

More information

Sýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

Sýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals ÍSLENSKIR STAÐLAR CEN/TS 16244:2018 Gildistaka 15.5.2018 ICS: 91.04 Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

More information

ALARM SYSTEMS - INTRUSION AND

ALARM SYSTEMS - INTRUSION AND IRISH STANDARD I.S. CLC/TS 50131-4:2006 ICS 13.310 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS -- PART 4: WARNING Tel: +353 1 807 3800

More information

POSITIONERS CONTROLS ELECTRO-PNEUMATIC INTELLIGENCE FOR DOUBLE & SINGLE ACTING PNEUMATIC ACTUATORS SERIES 6A. The High Performance Company CELEBRATING

POSITIONERS CONTROLS ELECTRO-PNEUMATIC INTELLIGENCE FOR DOUBLE & SINGLE ACTING PNEUMATIC ACTUATORS SERIES 6A. The High Performance Company CELEBRATING POSITIONERS ELECTRO-PNEUMATIC INTELLIGENCE CONTROLS SERIES 6A FOR DOUBLE & SINGLE ACTING PNEUMATIC ACTUATORS CELEBRATING The High Performance Company Y E A R S INTELLIGENCE Series 6A Intelligent Electro-Pneumatic

More information

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL

More information

30th. English. Anniversary Since 1980 RICH. Heat & Cool molding system RICH-2. ZICUL (Chiller) WATER PURIFIER

30th. English. Anniversary Since 1980 RICH. Heat & Cool molding system RICH-2. ZICUL (Chiller) WATER PURIFIER 30th Anniversary Since 1980 English RICH Heat & Cool molding system ZICUL (Chiller) WATER PURIFIER RICH system (Rapid isolation cooling & heating) Unparalleled quality Innovative level of quality : High

More information

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 15213-2 May 2006 ICS 35.240.60 English Version Road transport and traffic telematics - After-theft systems for the recovery

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18750 May 2015 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - Cooperative systems - Definition

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties INTERNATIONAL STANDARD ISO 9311-1 First edition 2005-08-15 Adhesives for thermoplastic piping systems Part 1: Determination of film properties Adhésifs pour réseaux de tuyauteries en matières thermoplastiques

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

HazLoc Essential Guides:

HazLoc Essential Guides: HazLoc Essential Guides: Intertek Deeside Lane, Chester, CH1 6DD UK hazloc@intertek.com +44 1244 882590 www.intertek-hazloc.com Contents Contents... 1 Introduction... 1 Introduction to Ex... 1 ATEX Overview...

More information

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16244 April 2018 ICS 91.040.10; 91.140.30 English Version Ventilation in hospitals - Coherent hierarchic structure and common

More information

National foreword. Text affected

National foreword. Text affected PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Récipients en verre Bagues à crans pour bouchage sous vide Partie 1: Généralités Reference

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

Pillow Plate Heat Exchanger SYNOTHERM

Pillow Plate Heat Exchanger SYNOTHERM Pillow Plate Heat Exchanger SYNOTHERM Functional principle of Pillow Plate Heat Exchangers SYNOTHERM 8000 heat transfer coeffcient h [ W/m 2 k ] 7000 6000 5000 4000 3000 2000 1000 0 Pillow Plate Heat Exchanger

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide quality Head Office Warwick House Houghton Hall Park Houghton Regis Dunstable LU5 5ZX Contact:

More information

Standards for ITS, the perspective of CEN/TC278

Standards for ITS, the perspective of CEN/TC278 Standards for ITS, the perspective of CEN/TC278 Henk Stoelhorst Chairman CEN/TC278 10 FEB 2010 Presentation content ITS standards Why do we need ITS standards The standards bodies CEN/TC278: ITS standards

More information

Contents. EN :2012 (E) Issue 5 ( ) Page

Contents. EN :2012 (E) Issue 5 ( ) Page Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...

More information

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Tällberg, Sweden

ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Tällberg, Sweden ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Tällberg, Sweden By jouko.vaskimo@aalto.fi ISO/TC 258, the Technical Committee (TC) of the International

More information

FF-SR Series. FF-SR25933 Two-hand Safety Control Module FF-SR25933

FF-SR Series. FF-SR25933 Two-hand Safety Control Module FF-SR25933 Two-hand Safety Control Module FF-SR Series FEATURES Complies with the Machinery Directive 98/37/EC and UL 508 Type III C per EN 574, Category 4 per EN 954-1 Inputs for two dual-contact pushbuttons 0,5

More information

Return loss measurement of fiber optic components

Return loss measurement of fiber optic components Return loss measurement of fiber optic components Solutions Brief 815-1 How the HP 8153A/HP 81534A measure return loss of fiber optic components? The significance of return loss The introduction of new

More information

International Standardization for the Petroleum and Natural Gas Industry Possible Cooperation of APEC Members with OGP/SC and ISO/TC-67

International Standardization for the Petroleum and Natural Gas Industry Possible Cooperation of APEC Members with OGP/SC and ISO/TC-67 2008/SOM3/SCSC/CONF/034 International Standardization for the Petroleum and Natural Gas Industry Possible Cooperation of APEC Members with OGP/SC and ISO/TC-67 Submitted by: International Association of

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

The ISIA Minimum Standard

The ISIA Minimum Standard The ISIA Minimum Standard Guidelines for Safety And something more Vittorio CAFFI Krakow 17-18 May 2012 1 Why safety? As every human activity, snowsports involve a certain degree of risk 2 Snowsports teachers

More information

Standardisation activities in the field of HMI for road vehicles

Standardisation activities in the field of HMI for road vehicles International Telecommunication Union Standardisation activities in the field of HMI for road vehicles Dr. Christhard Gelau Bundesanstalt für Straßenwesen/Federal Highway Research Institute (BASt) Department

More information

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.

More information

EUROPEAN LANDSCAPE CONVENTION CEP-CDPATEP

EUROPEAN LANDSCAPE CONVENTION CEP-CDPATEP Strasbourg, 21 April 2011 CEP-CDPATEP (2011) 1E Rev. EUROPEAN LANDSCAPE CONVENTION CEP-CDPATEP 6 th COUNCIL OF EUROPE CONFERENCE ON THE EUROPEAN LANDSCAPE CONVENTION DRAFT AGENDA Council of Europe Palais

More information

Pressing for Excellence. Tunnel Finisher & Bagging Machines

Pressing for Excellence. Tunnel Finisher & Bagging Machines Tunnel Finisher & Bagging Machines Market Leader with over 900 Finishing Facilities Worldwide We provide solutions for our customer s high demands for finish technology. For this reason we are one of the

More information

StolenVehicle Tracking

StolenVehicle Tracking StolenVehicle Tracking automotive.vodafone.co.uk Vodafone Power to you Vodafone Automotive Stolen Vehicle Tracking and Monitoring Services The ultimate protection for your vehicle with European coverage

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 22475-3 December 2007 ICS 03.120.20; 03.100.30; 93.020 English Version Geotechnical investigation and testing - Sampling

More information

Rotary Screw Compressors SXC»Compact«Series. With the world-renowned SIGMA PROFILE FAD 0.26 to 0.8 m 3 /min, Pressures bar

Rotary Screw Compressors SXC»Compact«Series. With the world-renowned SIGMA PROFILE FAD 0.26 to 0.8 m 3 /min, Pressures bar www.kaeser.com Rotary Screw Compressors SXC»Compact«Series With the world-renowned SIGMA PROFILE FAD 0.6 to 0. m /min, Pressures What do you expect from your compressed air system? Compressed air should

More information

MKN Galley Solutions

MKN Galley Solutions MKN Galley Solutions MKN Master of Performance MKN is at home in the best professional kitchens in the world, whether in high class hotels and restaurants, in community catering, in catering chains, in

More information

L-force Drive-based Safety. Safe, scaleable and above all integrated

L-force Drive-based Safety. Safe, scaleable and above all integrated L-force Drive-based Safety Safe, scaleable and above all integrated L-force your future is our drive 2 Cost efficiency, saving time and improving quality are the challenges of the future. Lenze is meeting

More information

stylemakerstm SINCE 1895

stylemakerstm SINCE 1895 stylemakerstm SINCE 1895 OUR HERITAGE With a clear focus on the future, we are able to draw on our long proud history for inspiration. But the real strength of our company lies in the quality of our employees.

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular INTERNATIONAL STANDARD ISO 9100-12 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 12: 89 regular Récipients en verre Bagues à crans pour bouchage sous vide Partie 12: 89 regular Reference

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16411 December 2014 ICS 97.190 Supersedes CEN/TR 16411:2014 English Version Child use and care articles - 2014 compiled interpretations of

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif

More information

CONFORMITY ASSESSMENT - SUPPLIER'S

CONFORMITY ASSESSMENT - SUPPLIER'S STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY

More information

Pillow Plate Heat Exchanger SYNOTHERM

Pillow Plate Heat Exchanger SYNOTHERM Pillow Plate Heat Exchanger SYNOTHERM Functional principle of Pillow Plate Heat Exchangers SYNOTHERM 8000 heat transfer coeicient h [ W/m 2 k ] 6000 4000 2000 0 Pillow Plate Heat Exchanger Tubular Heat

More information