Intrunet SPC series advanced security for a connected world

Transcription

1 Intrunet SPC series advanced security for a connected world The SPC series intrusion systems combine unmatched flexibility and scalability up to 51 wired/10 wireless zones, with a cost effective design and installation concept. All SPC controllers are designed to meet EN50131 standards, offering versatile operation and alarm management functionality. A common range of system components can be mixed and matched to expand the system and connect detectors and peripherals from the comprehensive Intrunet wired and wireless range. Straightforward system commissioning is achieved thanks to a powerful suite of configuration tools and a high speed/high length field bus, which also ensures high fault tolerance. The common look & feel across the hardware, configuration software and operational devices facilitate installation and set up and make operation very intuitive. With future-proof and high performance processor technology, the SPC series offer sophisticated functionality including advanced door control and true system partitioning for all application sizes and criticality, with ample room for expansions or upgrades. Answers for infrastructure.

2 Planning for the future with scalable SPC series intruder alarm systems A modular range for all applications Scalable up to 51 wired or wireless zones, the modular SPC series facilitate the planning and installation phases thanks to common keypads, modules and s, which can be mixed and matched to fit applications of all sizes and allow the systems to grow with the customer requirements. Sophisticated programming, alarm management and control functionality including door control enable the system to be truly tailored to the most stringent security requirements. True system partitioning All SPC series controllers support true system partitioning, enabling multi-area and multi-tenant applications. Multitenant systems have the capability to report multiple URNs to central stations and enable private (SMS) notification to specific users. For added security, access to the Web server is also partitioned with authentication for each tenant. Advanced connectivity With increasing requirements for security services, connectivity to Alarm Receiving Centres (ARC) is now a major part of any security system. The SPC controllers can connect to an ARC over PSTN, GSM or IP with GPRS backup, also enabling multi-transmission of queued alarms over PSTN and GSM in a single call. Unmatched installation flexibility The SPC series system design concept delivers a consistent overall performance regardless of the system size. The concept is supported by the high-speed and high-length field bus, a reliable backbone that is ideal for larger system installations, as it delivers high fault tolerance (loop configuration) and allows up to 400 m to separate each bus device. Seamless on-site programming The panel can also be set-up locally using the keypads, PC application or preprogrammed configurations by connecting the Fast Programmer to the controller. A parameter server enables a streamlined commissioning across a large installer team as it provides a common SPC configuration database. Engineer friendly menus (based upon mobile phone formats) along with system templates make the SPC series some of the quickest panels to program directly from the keypad. Remote configuration with unique on-board Web server The higher end controller models can be configured remotely through any of the communication channels (PSTN, GSM or IP over Ethernet using the on-board Web server or through the PC application. This remote programming facility minimises expensive on-site engineering costs and can contribute to lower the overall costs of ownership for the enduser. Powerful control and operation Various keypad variants are available, with additional integrated function modules such as card reader, Intrunet wireless receiver or voice assistance support. The 3-character standard keypads with clear text display provide a modern and functionally advanced user interface for all standard applications. The comfort keypad with its large LCD display and optional voice assistance functionality is ideal for a wide range of applications, from simple single area systems up to complex multi area systems. Control over SMS enables the system to be fully or part set and alarms to be restored. Advanced door management The SPC range cost effectively combine intrusion protection and door control management in the same control ler. Compatible with card and card/pin readers, they enable the control of up to 64 entry doors or 3 entry/exit doors, combined with automatic setting and unsetting of areas depending on the individual user rights. The definition of door groups supports high security applications, with additional function - ality such as anti-passback, card holder escort or custodian access. Highlights Controllers from 8 to 51 alarm zones From 6 up to 51 freely programmable outputs Advanced door control management functionality on all models Separate intrusion and access event logs On-board Web server as standard on all models for local or remote programming and control IP communication on all SPC panels series PSTN and GSM plug-in modules for versatile communication Reliable High fault tolerance with highspeed X-BUS expansion interfaces Future-proof and scalable systems Reduced on-site engineering time with flexible programming options Comprehensive suite of communication devices enables full up-/downloads EN Compliant (independently validated) Grade & Grade 3 Remote or on-site programming and maintenance

3 Intrunet SPC panels System example Motion detection Fast Programmer SPC Pro software On-board Web server System (8 inputs/ outputs) RS3 System (Smart Power System Supply) Wireless (8 outputs) USB Wireless sensors Wired sensors Manage/control/configure On-site connection via: On-site services Alarm signalling Max. 400 m X-BUS spurs or 1 loop* IP Ethernet PSTN GSM/ GPRS Standard LCD keypad Remote services Manage/control/configure 1 Comfort keypad, indication/key -door switch s (door management) Remote PC connection via: On-board Web server SPC Pro software SPC remote maintenance server SPC Safe with automated site administration over IP X-BUS IR1 0 PSTN GSM/ GPRS IR 70 IR6 0 Text messages to mobile phones IR6 5 Central Monitoring Station Control/event management To Com SPC IR1 60 User notification SP C SPC Com IP alarm receiver (Ethernet with GPRS backup) Ke y pa d Ze nt ra le Ex pa Connect on alarm/ event and on demand Control/event management nd er IP network X-BUS SPCSPC Zentrale Zentrale SPC Zentrale Event messages via SMS Control commands via SMS Other communications *Dependent on panel. SPC spur, SPC5000/6000 x spurs or 1 loop. Remote connection to an Alarm Receiving Centre Versatile communications with plug-in GSM and PSTN modules Remote event management and system control via SMS 3

4 Versatile operation and comprehensive alarm management functionality Intuitive keypad for direct operation Flexible remote control and operation via SPC Com or Web browser User-friendly local operation The system features various setting op tions accessible through the keypads: in FULLSET mode, it gives full protection to a building whilst opening of entry/ exit zones will start the entry timer. Two PARTSET modes provide perimeter protection to a building while allowing free movement through the exit and access areas. When selected, these modes will exclude pre-defined zones from protection, and the alarm is instantly activated. Instant control and safe operation over Web browser The on-board Web server enables users or engineers to log on remotely from any PC and check the system and zones status, as well as logs and perform certain programming operations over IP such as area setting or unsetting. A system alerts user page provides information on all of the alerts that the user can clear or isolate. The alert signal (or zone) and its current status is displayed along with the action available to the user for each of the alert conditions. This enables faults to be isolated until rectified, without impacting the performance of the rest of the system. Remote system control Users or engineers can log on from any remote PC and check the status of alarms, view event logs or turn on and off different areas. Users can also be notified of events via SMS text messaging and even control the panel via SMS commands sent over the GSM network (set, part-set, restore alarm). Direct alarm management The type of alarms generated by the SPC systems can vary depending on the type of zone that triggered the alarm activation (Each zone type will activate its own unique output type an internal flag or indicator that can then be logged or assigned to a physical output for activation of a specific device). A Full Alarm activation will report the alarm to the Alarm Receiving Centre (ARC) if one has been configured. A Local Alarm activation will not attempt to call the ARC even if one has already been configured. A Silent Alarm activation will not generate any visual or audible indications of the alarm. The alarm event will be reported to the ARC. Safer alarm handling The SPC Com alarm receiver software provides a graphical status representation of all SPC panels connected to the system. This enables a quicker event investigation and intervention. Actions undertaken in response to alarms can be logged for future reference, and response procedures can also be displayed to guide the user through the appropriate alarm handling steps. Powerful remote services On-site engineering time is minimised with remote configuration and control available through the unique Web server or a PC with SPC Pro both allowing engineers to access secure a full range of service functions, via Broadband/LAN or data channels over GSM/PSTN. Highlights Pre-defined operation modes facilitate set-up and reduce operator error Comprehensive system set options Local or remote system control Zone-specific alarm activation and transmission types Alarm transmission delay functionality with verification through event filtering Optimal queued alarms transmission in one call Reduced on-site engineering time with flexible programming options Graphical system alarm status Log of alarm responses and procedures 4

5 Technical overviews Controllers SPC40 / SPC430 SPC530 SPC530 SPC5330 SPC6330 Hard-wired zones (max.) 8 to 3 8 to 18 8 to 51 Wireless zones (max.) Programmable outputs (max.) 6 to 30 6 to 18 6 to 51 Number of areas (max.) Number of doors (max.) entry-exit/ 4 entry 16 entry-exit/16 entry 3 entry-exit/ 64 entry Number of users (max.) Field bus X-BUS devices (max.) 1 X-BUS interface (1 spur) 11 (5 s + 4 keypads + door s) X-BUS interfaces ( spurs or 1 loop) 48 (16 s + 16 keypads + 16 door s) 18 (64 s + 3 keypads + 3 door s) Calendars Cause & Effect programming Yes Yes Yes Event memory 1,000 10,000 intrusion and 10,000 access events Ethernet On board On board On board Language Multiple Multiple Multiple Comfort keypad, indication, keyswitch Remote maintenance server SPC Safe SPC Com Fast Programmer Operating voltage Auxiliary power Max. 750 ma (subject to size of battery fitted & Security Grade required) 1 output with max. 750 ma (at 1 V DC) on integrated PSU on controller PCB Battery (optional) Max. 7 Ah/1 V Max. 17 Ah/1 V Max. 7 Ah/1 V Max. 17 Ah/1 V Max. 17 Ah/1 V Housing Small metal Hinged metal Small metal Hinged metal Hinged metal Security grade (Grade, Class II) (Grade 3, Class II) (Grade, Class II) (Grade 3, Class II) (Grade 3, Class II) Plug-on modules and accessories SPCN110 SPCN310 SPCN910 SPCW110 SPCW101 Type Network connection PSTN module, V.90 PSTN (analogue telephone network) GSM module incl. antenna GSM / GPRS (Dual band) Communications Interface Module Supports 3rd party comms. devices - Redcare, Dualcom SiWay RF kit for panel External aerial kit Connection to SPCN310 or SPCW110 with m cable Frequency 900/1800 MHz 868 MHz Wireless receiver SiWay RF receiver Current consumption Min. 5 ma Max. 35 ma Min. 130 ma Max. 130 ma 40mA consumption quiescent Min. 10 ma Max. 10 ma 5

6 s SPCK40 SPCK41 SPCK4 SPCK60 SPCK63 SPCE10 SPCE110 Type Wired LCD keypad Wired LCD keypad with integrated card reader Wired LCD keypad with integrated wireless receiver Wired keypad with large LCD Wired keypad with large LCD and integrated card reader and audio LCD display x 16 characters x 16 characters x 16 characters 18 x 64 pixels 18 x 64 pixels Indication with LED s and function keys Keyswitch Card reader Voice annunciation 15 khz (EM410 or compatible) 15 khz (EM410 or compatible) 15 khz (EM410 or compatible) Wireless receiver SiWay RF receiver (868 MHz) Indication 3 status LED s 3 status LED s 3 status LED s 5 status LED s 5 status LED s 16 LED s (freely programmable) LED s (freely programmable) Operation soft keys and soft keys and soft keys and 4 soft keys and 4 soft keys and 4 function keys (freely progr.) Keyswitch with 3 positions (-0-1) Operating voltage V DC V DC V DC V DC V DC V DC V DC1 Current consumption Min. 45 ma Max. 90 ma Min. 80 ma Max.110 ma Min. 50 ma Max.95 ma Min. 55 ma Min. 110 ma Min. 30 ma Max. 90 ma Min. 30 ma Max. 50 ma Housing Plastic Plastic Plastic Plastic Plastic Plastic Plastic s SPCE650 SPCE450 SPCW130 SPCA10 SPCP33 SPCP333 SPCP43 SPCP433 Type 8 inputs / outputs 8 outputs Wireless receiver -door Smart PSU (7 AH) with I/O- Smart PSU (17 AH) with I/O- Smart PSU (7 AH) with I/O- Smart PSU (17 AH) with I/O- Harwired zones Outputs 8 Card reader interfaces Door capacity ( 6 bit/ Clock&Data) 1 entry/exit or entry Wireless receiver voltage Auxiliary power SiWay RF receiver (868 MHz) V DC 30 V AC, +10 to 15%, 50 Hz Max. x 750 ma (subject to size of battery fitted & Security Grade required) Battery Max. 7 Ah/1 V Max. 17 Ah/1 V Max. 7 Ah/1 V Max. 17 Ah/1 V Housing Plastic Small metal Hinged metal Small metal Hinged metal Cards & Tags IB41-EM IB4-EM IB44-EM IB45-EM Proximity 15 khz (EM Technology) Description 6 Printed ISO cards compliant with EM410 reading technology. Can be used with the readers xx500-em. Cards also include magnetic stripe and card number on back. Blank printable ISO card compliant with EM410 reading technology. Can be used with the readers xx500-em. Cards also include magnetic stripe and card number on back. Keyring tag with Siemens logo, compliant with EM410 reading technology. Can be used with the readers xx500-em. Card number on front. Adhesive tag with Siemens logo, compliant with EM410 reading technology. Can to be attached to existing magnetic stripe cards when adding EM410 readers to an existing magstripe installation. Card number on back.

7 Readers PP500-EM HD500-EM PR500-EM SP500-EM PM500-EM Proximity 15 khz (EM Technology) Description Heavy-duty card and PIN reader. Position indicator light and illuminated keypad make it easy to use in dark places. Tamper switch. Heavy-duty card-only reader. Vandal-proof, impact and fire resistant. Popular both in vulnerable locations and modern office environments. Card-only reader. Slim and compact. Card-only reader. Compact design. Designed for mounting in single-gang back boxes. Card-only reader. Designed for panel mounting. Suitable for most remote call-point locations. Interface to controller Environment Remote/on-site programming and operation SPCX410 SPCS310 SPC Web server SPCS30 SPCS410 SPCS510 Type SPC Fast Programmer SPC Pro programming software On-board Web server SPC Remote maintenance server SPC Safe site administration server SPC Com alarm receiving software Availability SPC41xx SPC5xx SPC41xx SPC5xx SPC5xx SPC5xx Limited features for SPC41xx SPC5xx SPC 63xx Key functionality Save/back up site configurations (store up to 100 configuration files) Save default files (sites with static values for future reuse) Retrieve/download firmware releases 1MB memory Common engineering tool for SPC series for configuration, commissioning and maintenance: Offline preconfigurations On site (RS3/ USB/IP) Remote (PSTN/ GSM/IP over Ethernet) Authenticated access Graphical status representation with icons Only the parameters and attributes of the configured devices and options are visible Accessible via any PC with standard browser Automatic or manual technical status report / log file transmission from panels (SPC5000/6000) to remote maintenance server at predefined time intervals Every status report is stored in a database SPC Pro (standalone) as installer interface to maintenance server Notification in SPC Pro if results requires attention by installer Supports up to 50 Installation Reporting via PSTN, GSM or IP (over Ethernet) Repository for all SPC4000/5000/ 6000 configuration files with client / server architecture Export of configuration files from SPC Safe database to local PC s for offline configuration changes in field with SPC Pro. Import of SPC4000/5000/ 6000 configuration files in SPC Safe database from local PC s after offline configuration changes in field with SPC Pro Automatic update of central data base via IP after local configuration change of panel (/63xx model) Provides full alarming Chain, from detector to receiver for and SPC 63xx Simple interface to monitor and control a large panel park (status icon for each connected panel) Supports integration of SPC Com into existing CMS annunciation software via standard SurGard serial interface protocol) Connection USB (PC) and 10-pin socket (SPC controller) RS3, USB, IP over Ethernet GSM, PSTN, IP over Ethernet GSM, PSTN, IP over Ethernet IP over Ethernet IP over Ethernet, IP over GPRS 7

8 Answers for infrastructure. Megatrends driving the future The megatrends demographic change, urbanization, climate change and globali zation are shaping the world today. These have an unprecedented impact on our lives and on vital sectors of our economy. Innovative technologies to answer the associated toughest questions Throughout a 160 year history of proven research and engineering talent, with more than 50,000 active patents, Siemens has continuously provided its customers with innovations in the ar eas of healthcare, energy, industry and in frastructure globally and locally. Increase productivity and efficiency through complete building life cycle management Building Technologies offers intelligent integrated solutions for industry, commercial and residential buildings and public infrastructure. Over the entire fa cility s life cycle, our comprehensive and environmentally conscious port fo lio of products, systems, solutions and services for low voltage power distribution and electrical installation technology, building automation, fire safety and security, ensures the: optimum comfort and highest energy efficiency in buildings, safety and security for people, processes and assets, increased business productivity. Siemens plc Industry Sector Building Technologies Division Brecon House Llantarnam Park Cwmbran NP44 3AB United Kingdom Tel +44 (0) Fax +44 (0) The information in this document contains general descriptions of technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract.