INDONESIA REGULATORY BODY. as of 3 November 2017 I. COUNTRIES WITH MANDATORY STANDARDS FOR GOVERNMENT PROCUREMENT ONLY RATIONALE FOR REGULATION
|
|
- Douglas Peters
- 6 years ago
- Views:
Transcription
1 I. COUNTRIES WITH MANDATORY STANDARDS FOR GOVERNMENT PROCUREMENT ONLY INDONESIA I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Indonesia Consumer Protection II. REGULATION BODY COUNTRY REGULATORY BODY Indonesia Ministry of Industry Ministry of Energy and Mineral Resources Ministry of Trade Page 1 of 17
2 III. LEGISLATIVE FRAMEWORK COUNTRY Indonesia LEGISLATIVE FRAMEWORK 1. Act No. 8 / 1999 concerning Consumer Protection 2. Act No. 3 / 2014 concerning Industry 3. Act No. 7 / 2014 concerning Trade 4. Act No. 20 /2014 concerning Standardization and Conformity Assessment. Government Regulation No. 102/2000 concerning National Standardization 6. Decree of the Minister of Industry No. 86/M-IND/PER/9/2009 concerning the Implementation of SNI in Industrial Sector 7. Decree of the Minister of Industry No. 1/M-IND/PER/3/2012 concerning The Procedures for Recognition of Certification Product of Electrical and Electronic Equipment Issued by Conformity Assessment Bodies Listed in ASEAN 8. Decree of the Minister of Energy and Mineral Resorces No. 01/2016 concerning The Procedures for Recognition of Product Certification and Product Test Report of Electrical and Electronic Equipment Issued by Conformity Assessment Bodies Listed in ASEAN 9. Decree of the Minister of Trade No. 24/M-DAG/PER/4/2016 concerning Standardization on Trade Sector Page 2 of 17
3 IV. MANDATORY STANDARDS Product type or grouping Domestic Standards Please tick box if mandatory STANDARDS Relevant International Standards Incandescent lamps SNI V IEC Ed.6 ( ) Self-ballast lamp for general lighting SNI V IEC Ed.1.0 service ( ) Plugs and socket-outlets for household and similar purposes. Part 1 : General requirement Switches for household installations and similar fixed electric. Part 1: General requirements Circuit breakers for over current protection for household and similar installation. Part 1 : Circuit breaker for a.c operated Electrical appliances for household usages and other similar types of safety products; Part Special requirements for electric fan Lamp controlgears - Part 1: General and safety requirements Lamp controlgears - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps Indicate whether requires: State reason Safety (S), if MOD Environment HS Code (E), EMC, or combinatio n IDT S Extent of Alignment Type of Certification IDT S SNI V IEC ( ) IDT S SNI V IEC (2000) IDT S SNI SNI /Amd SNI SNI SNI V IEC (2003) IDT S V IEC ( ) IDT S V IEC ( ) IDT S V IEC ( ) IDT S Page 3 of 17
4 Product type or grouping Residual current operated circuit - breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 1: General rules Residual current operated circuitbreakers without integral overcurrent protection for household and similar uses (RCCB s) - Part 2-1: Applicability of the general rules to RCCB s functionally independent of line voltage Luminaires - Part 1: General requirements and tests Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires Domestic Standards Please tick box if mandatory STANDARDS Relevant International Standards Extent of Alignment State reason if MOD Indicate whether requires: Safety (S), Environment (E), EMC, or combinatio n HS Code SNI V IEC ( ) IDT S SNI V IEC ( ) IDT S SNI V IEC (2003) IDT S SNI V IEC (1979) IDT S Type of Certification Luminaires - Part 2-2: Particular requirements - Recessed luminaires Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting SNI SNI V IEC (1997) IDT S V IEC (2002) IDT S Luminaires - Part 2-: Particular requirements Floodlights SNI Primary Battery - part 1: General SNI V V IEC (1998): IDT S IDT S IEC (2000) Page 4 of 17
5 Product type or grouping Primary Battery - part 2: Electrical and Physical Requirement PVC insulated cables with a rated voltage up to 40/70 V - Part 3: Nonsheated cables for fixed wiring PVC insulated cables with a rated voltage up to 40/70 V - Part 4: Sheated cables for fixed wiring PVC insulated cables with a rated voltage up to 40/70 V - Part : Flexible cables Domestic Standards Please tick box if mandatory STANDARDS Relevant International Standards Extent of Alignment State reason if MOD Indicate whether requires: Safety (S), Environment (E), EMC, or combinatio n HS Code SNI V IEC (2000) IDT S SNI V IEC ( ) IDT S SNI V IEC ( ) IDT S SNI V IEC ( ) IDT S Type of Certification Page of 17
6 Product type or grouping Safety of household and similar electrical appliances Part 2-41 : Particular requirements for pumps Domestic Standards SNI Please tick box if mandatory STANDARDS Relevant International Standards V IEC ( ) Extent of Alignment State reason if MOD Indicate whether requires: Safety (S), Environment (E), EMC, or combinatio n HS Code IDT S Type of Certification Household and similar electrical appliances Safety Part 2-3: Particular requirements for electric irons SNI V IEC ( ) IDT S Audio, video and similar electronic apparatus Safety requirements SNI V IEC 6006 ( ) MOD Unless otherwise specified, the tests are carried out under normal operating conditions at: - anambient temperature between 20 o C and 3 o C - a relative humidity of 70 % ± 1% maximum S Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers SNI IEC :2009 V IEC Ed 4.2 (200-07) IDT S Page 6 of 17
7 Product type or grouping Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines Domestic Standards SNI IEC :2009 SNI IEC :2009 Please tick box if mandatory STANDARDS Relevant International Standards V IEC Ed 6.1 (200-04) V IEC ( ) Extent of Alignment State reason if MOD Indicate whether requires: Safety (S), Environment (E), EMC, or combinatio n HS Code IDT S IDT S Type of Certification Page 7 of 17
8 V. MODE OF REGULATION AND TYPES OF CONFORMITY ASSESSMENT REGIMES COUNTRY Indonesia TYPES OF CON- FORMITY ASSESS- MENT REGIMES Technical Regulation based on SNI MODE OF REGULATION Technical regulation on EEE by adopting partially or fully technical specification and/or parameter of SNI is stipulated by Ministerial Decree taking into account safety, security, health, environment, moral hazard, and economical aspects, that are equally imposed to both domestic and imported products which are traded in Indonesian teritory. Manufacturers of EEE which are technically regulated based on SNI shall fulfill the SNI requirements and shall affix the SNI mark on the products, packages and/or label of their products Product Registration to get NPB (for imported products) or NRP (for domestic products) Pre-market surveillance over traded goods produced domestically, shall be done through Product Registration Number (Nomor Registrasi Produk - NRP) Pre-market surveillance over imported of EEE shall be done through Goods Registration Number (Nomor Pendaftaran Barang NPB), NRP and NPB shall be issued by the Director of Standardization and Quality Control, Ministry of Trade The validity of NRP and NPB are in accordance with the validity period of SPPT SNI. NRP or NPB shall affix underneath SNI Mark and/or other recognized conformity mark, on to their products or packages. Page 8 of 17
9 COUNTRY TYPES OF CON- FORMITY ASSESS- MENT REGIMES Registration of CAB MODE OF REGULATION as of 3 November 2017 CAB issuing an SNI Mark Product Certification can be a domestic or foreign product certification body supported by accredited testing laboratories and/or inspection institutions. Domestic CAB shall be accredited by KAN according to its scopes, CAB shall be registered to the Directorate of Standardisation and Quality Control, Ministry of Trade. All CAB which have the scope of mandatory SNI s requirements shall be accredited by National Accreditation Body of Indonesia (KAN) and assigned by Minister of Industry Page 9 of 17
10 VI. FLOWCHART OF INDONESIA S REGIME PROCEDURES FOR RECOGNITION OF CERTIFICATES OF EEE FROM CONFORMITY ASSESSMENT BODIES IN ASEAN COUNTRIES AMS Indonesia Product EEE ASEAN 1 Listed Product Certification Body for EEE 3 Product Certification Body SPPT SNI according to certification type ISO/IEC Listed Testing Lab. for EEE Legend: 1. Using Certificate of Conformity issued by AMS Listed Product Certification Body 2. Using Testing report issued by AMS Listed Testing Lab. Listed Testing lab have to be accredited for full parameter of the standards 3. Direct to Indonesia Registered Product Certification Body Page 10 of 17
11 EEE products from ASEAN countries could enter Indonesia through three mechanisms: 1. Using Certificate of Conformity (CoC) from Product CB outside Indonesia 1.1 Manufacturer certify their products in CB from outside Indonesia (Listed in ASEAN). 1.2 Importer submits an application to Registered CB in Indonesia to issue SPPT-SNI, by attaching required documents. 1.3 CB in Indonesia verifies the application and the documents. 1.4 In the case of questionable data/information in CoC and/or test report, CB in Indonesia may re-test the product. 1. In the case of different edition of referenced standard, modification, or others, CB in Indonesia may take test of untested parameters. 1.6 Based on verification result, CB in Indonesia may approve or reject the application. 1.7 CB in Indonesia will conduct market surveillance 1.8 CB in Indonesia will evaluate factory surveillance report conducted by foreign CB which issued CoC. 2. Using test report from testing laboratory in home country 2.1 Manufacturer test their product in Testing laboratory in their home country (Listed in ASEAN) 2.2 Importer submits an application to Registered CB in Indonesia to issue SPPT-SNI, by attaching required documents. 2.3 CB in Indonesia verifies the application and the documents. 2.4 In the case of questionable data/information in test report, CB in Indonesia may re-test the product. 2. In the case of different edition of referenced standard, modification, or others, CB in Indonesia may take test of untested parameters. 2.6 Based on verification result, CB in Indonesia may approve or reject the application. 2.7 In the case of the application is approved, CB in Indonesia will continue the certification process (including factory audit) and issues SPPT-SNI or reject the application. 2.8 CB in Indonesia will conduct market surveillance. Page 11 of 17
12 3. Using Indonesia Registered Product CB Manufacturer certify their products using Indonesia Registered Product CB. VII. MAINS VOLTAGE, FREQUENCY AND MAINS PLUG CONFIGURATION Country Indonesia Mains Voltage and Tolerance Mains Frequency and Tolerance Applicable Legislation Domestic Standard 230 % 0 % SNI Plugs and socketoutlets for household and similar purposes. Part 1 : General requirement Please tick box if mandatory V Mains Plug Configuration Relevant Extent of International Alignment Standard - IEC Ed.3.0(2002,am.1 (2006) IEC Ed.1.0(1987) IEC Ed.1.0(1989) (0nly for the safety) Diagram of Mains Plug Configuration- SNI :Plugs and Sockets-Outlets for household and similar purposes;part 2.3:Particular Requirement for switched socket outlets without interlock for fixed installation. Page 12 of 17
13 Country Mains Voltage and Tolerance Mains Frequency and Tolerance Applicable Legislation Domestic Standard SNI : Plugs and Sockets-Outlets and couplers for industrial purposes;part 3: Particular Requirement for plugs, socket outlets, connectors and appliance inlets for use in explosive gas atmospheres. SNI /Amd on Amendment 1 of Indonesian National Standard for General Requirements on Electrical Installation Please tick box if mandatory Mains Plug Configuration Relevant Extent of International Alignment Standard - V IEC (series) Diagram of Mains Plug Configuration- Page 13 of 17
14 VIII. MARKING/LOGO : Affixing SNI and NRP Note: 101 : Product Certification Body certifying the products 010 : Factory Location : Registration Number in Directorate of Standardization and Quality Control Page 14 of 17
15 Affixing SNI and NPB Note: 101 : Product Certification Body certifying the products 16 : Country of Origin : Registration Number in Directorate of Standardization and Quality Control Page 1 of 17
16 IX. OTHER INFORMATION No Product Additional Requirement Link for Technical Regulation 1. Air Conditioner (AC) - Minimum class I Insulation - Supply cable must SNI certified 2. Refrigerator - Minimum class I Insulation - Supply cable must SNI certified - Plug must SNI certified - Gross capacity is calculated based on SNI ISO 102: _30_IUBTT_2013%20AC%20kulkas%20mesin%20cuci.pdf 3. Washing Machine - Minimum class I Insulation - Supply cable must SNI certified - Plug must SNI certified - Loading capacity is calculated based on IEC Water Pump - Minimum class I Insulation - Supply cable must SNI certified - Plug must SNI certified. Electric iron - Minimum class I Insulation - Supply cable must SNI certified - Plug must must SNI certified nis_sni_ %202.pdf 6. CRT Television - Minimum class II Insulation - Supply cable must SNI certified - Plug must SNI certified Page 16 of 17
17 X. CONTACT PERSON Country Indonesia JSC EEE Representative Officer Chandrini M. Dewi Director of Standardization and Quality Control Directorate General of Consumer Protection and Trade Compliance Ministry of Trade Jl. Raya Bogor KM 26 Ciracas - Jakarta Timur Telp : (021) /3Fax : chandrini.dewi@kemendag.go.id, ks.ditstandalitu@gmail.com Contact Person Konny Sagala, S.Si Head of Center for Cooperation on Standardization - BSN BPPT I Building Jl. M.H. Thamrin No. 8, Kebon Sirih Jakarta Pusat Indonesia Phone : Fax : konny@bsn.go.id, bilreg.bsn@gmail.com Designating Body Wahyu Purbowasito Setyo Waskito Head of Center for Standard Application System - BSN BPPT I Building Jl. M.H. Thamrin No. 8, Kebon Sirih Jakarta Pusat Indonesia Phone : Fax : db_indonesia@bsn.go.id Page 17 of 17
INDONESIAN MANDATORY EE STANDARDS (26 Products) as of 12 Feb 2016
INDONEIAN MANDATORY EE TANDARD (26 Products) as of 12 Feb 2016 Domestic tandards mandaty TANDARD tandards Incandescent lamps NI 04-3560-1994 V IEC 60064 Ed.6 (1993-12) elf-ballast lamp f general lighting
More informationSINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY
As of June 2016 SINGAPORE I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY COUNTRY REGULATORY BODY Singapore SPRING Singapore III. LEGISLATIVE
More informationSINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY
As of October 2017 SINGAPORE I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY COUNTRY REGULATORY BODY Singapore SPRING Singapore III. LEGISLATIVE
More informationTHAILAND REGULATORY BODY LEGISLATIVE FRAMEWORK RATIONALE FOR REGULATION. Consumer Protection.
THAILAND I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Thailand Consumer Protection. II. REGULATION BODY COUNTRY Thailand REGULATORY BODY Thai Industrial tandards Institute (TII) under the
More informationTHAILAND REGULATORY BODY LEGISLATIVE FRAMEWORK RATIONALE FOR REGULATION. Consumer Protection.
THAILAND I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Thailand Consumer Protection. II. REGULATION BODY COUNTRY Thailand REGULATORY BODY Thai Industrial tandards Institute (TII) under the
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationMUTUAL RECOGNITION ARRANGEMENT ON CONFORMITY ASSESSMENT OF ELECTRICAL AND ELECTRONIC EQUIPMENT. APEC EEMRA Information Interchange Format PART 1
MUTUAL RECOGNITION ARRANGEMENT ON CONFORMITY ASSESSMENT OF ELECTRICAL AND ELECTRONIC EQUIPMENT APEC EEMRA Information Interchange Format PART 1 Introduction This format is being prepared to assist member
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationREGULATORY ENVIRONMENT ON ELECTRICAL AND ELECTRONIC PRODUCTS IN ASEAN. Table of Contents
REGULATORY ENVIRONMENT ON ELECTRICAL AND ELECTRONIC PRODUCTS IN ASEAN Table of Contents I. Rationale for Regulation II. III. IV. Regulatory Authority Legislative Framework Mandatory V. Mode of Regulation
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationList of Harmonised Standards for EEE. Household and similar electrical appliances- Safety Part 1: General requirements
Updated on 13 November 2015 List of Harmonised Standards for EEE *or any newer edition No. Agreed edition* of IEC Standards for ASEAN Harmonization Standard Title Scope of Standard 1 IEC 60065 Ed.7.0(2001)
More informationAS/NZS IEC :2013
AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED
More informationIEC vs Myanmar vs Electrical and Electronic ဦ အ က ဒ တ ယ ည န က ရ မ လ ပ စစ စစ ဆ ရ ဌ န မန တ လ တ င ဒသက စက မ က က ပ ရ န င စစ ဆ ရ ဦ စ ဌ န စက မ ဝန က ဌ န 1
IEC vs Myanmar vs Electrical and Electronic Equipment Standards ဦ အ က ဒ တ ယ ည န က ရ မ လ ပ စစ စစ ဆ ရ ဌ န မန တ လ တ င ဒသက စက မ က က ပ ရ န င စစ ဆ ရ ဦ စ ဌ န စက မ ဝန က ဌ န 1 VS. JSCEEE VS. Electrical Inspection
More informationEU Declaration of Conformity Annex
EU Declaration of Conformity Annex Document number: 2016 / 9C1-3423710-EN-00 The conformity of the designated product(s) with the provisions of the European radio equipment Directive is given by the compliance
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationCOMMISSION REGULATION (EU) / of
EUROPEAN COMMISSION Brussels, 30.11.2016 C(2016) 7767 final COMMISSION REGULATION (EU) / of 30.11.2016 amending Regulations (EC) No 1275/2008, (EC) No 107/2009, (EC) No 278/2009, (EC) No 640/2009, (EC)
More informationsafety requirements are to comply with this compulsory specification twelve (12) months after the publication of this notice.
28 No. 38232 GOVERNMENT GAZETTE, 28 NOVEMBER 2014 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID No. 944 28 November 2014 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act
More informationEU Declaration of Conformity
Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: 2015/ 9C1-3290710-EN-00 OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Germany OSRAM
More informationEnergy Efficiency Labelling
THE KINGDOM OF SAUDI ARABIA IMPORT GUIDE No 02 Energy Efficiency Labelling Important Note : this Import Guide is intended to give Bureau Veritas Customers essential information as reference related to
More informationEU Declaration of Conformity
Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: 2016 / 9C1-3378799-EN-00 OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Gerrnany OSRAM
More informationEU Declaration of Conformity Annex
The conformity of the designated product(s) with the provisions of the European Low Voltage Directive is given by the compliance with the following European Standard(s) or other specifications. If not
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More informationEC-Declaration of Conformity Annex
EC-Declaration of Conformity Annex Document number: / ZCI-2987462-DOC-00 The conformity of the designated product(s) with the provisions of the European Directive 2006/95/EC is given by the compliance
More informationAS/NZS :2015
AS/NZS 60598.2.10:2015 (IEC 60598.2.10, Ed.2.0:2003, MOD) Australian/New Zealand Standard Luminaires Part 2.10: Particular requirements Portable luminaires for children Superseding AS/NZS 60598.2.10:1998
More informationASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES
ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES In accordance to the ASEAN Sectoral MRA for Electrical and Electronic Equipment,
More information2014 / ZCI DOC-00 OSRAM GmbH Marcel-Breuer-Str München Germany. OSRAM Lamp controlgear QUICKTRONIC. M See attached list
OSRAM H Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Germany OSRAM Lamp controlgear QUICKTRONIC M
More information2013 / ZCI DOC-00 OSRAM GmbH Marcel-Breuer-Str München Germany. OSRAM LED module LF05A/E-P. M See attached list
OSRAM m Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: / ZCI-2853521 -DOC-00 OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Germany
More informationCERTIFICATION BODY ACCREDITATION PROGRAM (CBAP) Scope of Accreditation
CERTIFICATION BODY ACCREDITATION PROGRAM (CBAP) Scope of Accreditation Accredited Legal Entity: LABTEST CERTIFICATION INC. Contact Name: Address: Kavinder Dhillon 3133-20800 Westminster Highway Richmond,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD. 1 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 Thailand Mr. Dirk Fleischer (Quality
More informationEC-Declaration of Conformity OSRAM J
EC-Declaration of Conformity OSRAM J Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: / ZCI-2790030-DOC-00 OSRAM GmbH Marcel-Breuer-Str.
More informationParkring Garching Germany. OSRAM Double-capped LED Lamp SubstiTUBE T8 ADVANCED HF El See attached list
0 LEDVANCE Document number: 2016 / 9C1-3424019-EN-00 Manufacturer or representative: LEDVANCE GmbH Address: Parkring 29-33 85748 Garching Germany Brand name or trade nnark: Product type: Product designation:
More informationEU Declaration of Conformity Annex
2017 / 9C1- The conformity of the designated product(s) with the provisions of the European Low Voltage Directive is given by the compliance with the following European Standard(s) or other specifications.
More informationCONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES
CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES 1 Hair Dryers 8516.31 MS IEC 60335-2-23 Household and similar electrical appliances-
More informationEU eclaration of Conformity
EU eclaration of Conformity Document num ber: 2016 / 27 / 1D Manufacturer or representative: Radium Lampenwerk GmbH Lampenwerk Wipperfürth Address: Dr. Eugen-Kersting-Str. 6 D-51688 Wipperfürth Germany
More information10.6 Schedule of Accreditation
Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying
More informationCRITICAL INTERPRETATION/ ADDITIONAL REQUIREMENTS WHERE LISTED STANDARDS ARE INSUFFICIENT/SILENT/VAGUE
As of April 2017 CRITICAL INTERPRETATION/ ADDITIONAL REQUIREMENTS WHERE LISTED STANDARDS ARE INSUFFICIENT/SILENT/VAGUE Member Product 1 Applied Clause/s Issues/Concerns Critical Interpretation Additional
More informationENERGY EFFICIENCY STANDARD AND LABELING FOR REFRIGERATOR IN INDONESIA
Technical Reference on Harmonization of Energy Efficiency Test Methods of Refrigerators Toward the New IEC 62552 among APEC Region Held by China Standard Certification Guiyang China, 2 December 2015 Totok
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 THAILAND Mr. Dirk Fleischer (Quality Manager
More informationEC-Declaration of Conformity
!OSRAM Manufacturer or representative: OSRAM GmbH Address: Marcel-Breuer-Str. 6 80807 München Germany Brand name or trade mark: Product type: Product designation: OSRAM Self-ballasted LED lamp Lightify
More informationANNEX. to the. Proposal for a Council Decision. on the conclusion of the Free Trade Agreement between the European Union and the Republic of Singapore
EUROPEAN COMMISSION Brussels, 18.4.2018 COM(2018) 196 final ANNEX 3 ANNEX to the Proposal for a Council Decision on the conclusion of the Free Trade Agreement between the European Union and the Republic
More informationDEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008)
STAATSKOERANT, 19 NOVEMBER 2010 No.33763 11 No. R. 1072 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID 19 November 2010 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5
More informationACMA mandated EMC standards
Part 1 Generic standards Item No. Applicable Standard Full Title of Standard Publication Date equipment type Standard being replaced AS/NZS 61000.6.3: 2012 30/04/2012 AS/NZS 61000.6.3: 2007 14/10/2015
More informationEU Declaration of Conformity Lampenwerk Wipperfürth
Lampenwerk Wipperfürth Document number: 2016 / 26 / 1D Manufacturer or representative: Radium Lampenwerk GmbH Address: Dr. Eugen-Kersting-Str. 6 D-51688 Wipperfürth Germany Brand name or trade mark: Product
More informationEnergy Efficiency Labelling
THE KINGDOM OF SAUDI ARABIA IMPORT GUIDE No 02 Energy Efficiency Labelling Important Note : this Import Guide is intended to give Bureau Veritas Customers essential information as reference related to
More informationRADIOCOMMUNICATIONS (EMC STANDARDS) NOTICE 2004 No. 2
RADIOCOMMUNICATIONS (EMC STANDARDS) NOTICE No. 2 Pursuant to regulation 32(1)(a), (b), (c), (d) and (j) of the Radiocommunications Regulations 2001, the Chief Executive, Ministry of Economic Development,
More information10.6 Schedule of Accreditation
Accreditation Manager: Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements
More informationEC-Declaration of Conformity
Document number: 1/5 Manufacturer or representative: OSRAM AG Address: Hellabrunner Straße 1 81543 München Germany Brand name or trade mark: Product type: Product designation: LED module LS_LRXXX-Linear
More informationLaboratory Authorization Certificate
Laboratory: Scope of Authorization: NEMKO S.p.A. a Socio Unico Via del Carroccio, 4-20853 Biassono (MB) ITALY UL60950-1 Information Technology Equipment Safety Part 1 General Requirements (Including AM
More informationEC-Declaration of Conformity
V V! i bsram Manufacturer or representative: OSRAM GmbH Address: Marcel-Breuer-Str. 6 80807 München Germany Brand name or trade mark: Product type: Product designation: OSRAM Self-ballasted LED lamp Lightify
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationG-Marking Low Voltage Electrical Equipment & Appliances. GCC-GSO Conformity Assessment Scheme (RCAS)
G-Marking Low Voltage Electrical Equipment & Appliances GCC-GSO Conformity Assessment Scheme (RCAS) 1 Agenda TOPIC G-Marking Scheme Overview G-Marking Now and Post July 2016 Affected Products, Standards,
More informationZCI DOC-00 OSRAM GmbH Marcel-Breuer-Str München Germany. Auxiliary Equipment LS/PD AP KIT. See attached list
OSRAM Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: ZCI-3054178-DOC-00 OSRAM GmbH Marcel-Breuer-Str. 6 80807 München Germany OSRAM
More informationEC-Declaration of Conformity
Manufacturer or representative: OSRAM GmbH Address: Marcel-Breuer-Str. 6 80807 München Germany 1/6 Brand name or trade mark: Product type: Product designation: OSRAM Lamp controlgear QTP-OPTIMAL See attached
More informationEC-Declaration of Conformity
Manufacturer or representative: OSRAM GmbH 1/6 Address: Marcel-Breuer-Str. 6 80807 München Germany Brand name or trade mark: Product type: Product designation: OSRAM as specified below DALI Professional
More informationAUGUST 2016 CONTENTS:
EMC SERVICES NEWSLETTER AUGUST 2016 CONTENTS: RECENT STANDARD CHANGES NEW FCC REGULATIONS IEC 60601-1-2 4TH EDITION LOW VOLTAGE DIRECTIVE EU DIRECTIVES EMC DIRECTIVE 2014/30/EU KOREA UPDATE: KN32/35 1.
More informationAS/NZS IEC 62560:2014
AS/NZS IEC 62560:2014 (IEC 62560-2011 Ed 1.0, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications AS/NZS IEC 62560:2014 AS/NZS
More information10.6 Schedule of Accreditation
Accreditation Manager: Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements
More information1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?
QUESTIONS TO REGULATORS 1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres? Note: This answer only relates to coal mining in the state of New South
More information10.6 Schedule of Accreditation
Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying
More informationGovernment Notices
Government Notice No. 200 of 2017 Government Notices 2017 1265 THE CONSUMER PROTECTION ACT Regulations made by the Minister under section 4 of the Consumer Protection Act 1. These regulations may be cited
More informationAS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017
AS/NZS 62560:2017 (IEC 62560, Ed. 1.1:2015, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications Superseding AS/NZS IEC 62560:2014
More informationCompilation of regulatory approaches used in various countries. Information received by the Secretariat through a survey in 2009
Compilation of regulatory approaches used in various countries Information received by the Secretariat through a survey in 2009 At its seventeenth session, the Working Party mandated the Sectoral Initiative
More informationResource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes. Tokyo, 15 February 2016
Resource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes Tokyo, 15 February 2016 Policy context Europe 2020 Strategy: objectives on employment,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA INC. 10 Technology Drive (Test Laboratory) Peabody, MA 01960 Mr. William Stinson Phone 1 978 573 2517 ELECTRICAL Valid To: December 31, 2019
More informationIntegration of IEC Standards and Conformity Assessment into LED Lighting Market In Korea DEONNA (KEUM) LEE
Integration of IEC Standards and Conformity Assessment into LED Lighting Market In Korea 2017.10.11 DEONNA (KEUM) LEE 1 CONTENTS 1. Introduction 2. LED Lighting Standardization of Korea 3. Test & Certification
More informationDRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT
COMMITTEE: EL-002 Safety of Household and Similar Electrical Appliances and Small Power Transformers ATTENTION: Bev Harniss DR 18925 CP DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR
More informationCERTIFICATION BODY ACCREDITATION PROGRAM QUALITY AUDITING INSTITUTE
CERTIFICATION BODY ACCREDITATION PROGRAM Accredited Legal Entity: QUALITY AUDITING INSTITUTE #16-211 Schoolhouse Street, Coquitlam, BC V3K 4X9 Canada Telephone: (604) 461-8378 Fax: (604) 461-8377 Email:
More informationC 271/32 Official Journal of the European Union
C 271/32 Official Journal of the European Union 12.11.2003 Commission communication in the framework of the implementation of the Council Directive 89/336/EEC (2003/C 271/04) (Text with EEA relevance)
More informationOverview of standardization and mandatory technical regulation systems of Turkmenistan. (gas and electricity)
Annex 9 verview of standardization and mandatory technical regulation systems of Turkmenistan (gas and electricity) Prepared by: Reviewed by: Quality Assured by: Leonid Malov Viktor Petrenko Volodymyr
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 7240-29 First edition 2017-06 Fire detection and alarm systems Part 29: Video fire detectors Systèmes de détection et d alarme d incendie Partie 29: Titre manque Reference
More informationOn Electromagnetic Compatibility
TECHNICAL REGULATION On Electromagnetic Compatibility Approved by Resolution of Cabinet of Ministers of Ukraine No. 785 dd. 2009.07.29 ELMAS LTD Index Index...2 General Provisions...3 Essential Requirements...5
More informationConsumer Protection (Safety Requirements) (Amendment) Regulations 2017
Consumer Protection (Safety Requirements) (Amendment) Regulations 2017 GN No. 200 of 2017 Government Gazette of Mauritius No. 95 of 7 October 2017 THE CONSUMER PROTECTION ACT Regulations made by the Minister
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 173/05)
C 173/142 EN Official Journal of the European Union 13.5.2016 Commission communication in the framework of the implementation of Directive 2014/30/EU of the European Parliament and of the Council on the
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02)
12.2.2016 EN Official Journal of the European Union C 54/9 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. October 2014
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC October 2014 Issued on : 07 November 2014 Page 1 Information Procedure on Standards Notifications
More informationRole of CE Marking in the Placing on the Market of Electronic Components
Explanatory Leaflet Role of CE Marking in the Placing on the Market of Electronic Components New Legislative Framework Component Industries RoHs Directive CE Marking Low Voltage Directive Electronic Components
More informationWilla Breed Manager: Electrotechnical Standards SABS South Africa
Willa Breed Manager: Electrotechnical Standards SABS South Africa Energy efficiency of electrical and electronic apparatus What does SANS 941 require? Overview of the Presentation Introduction Steps for
More informationEU Declaration of Conformity Annex
The conformity of the designated product(s) with the provisions of the European Low Voltage Directive, /35/EU, is given by the compliance with the following European Standard(s) or other specifications.
More information31 March 2015 LW JELE (TECHNICAL SPECIALIST) NRCS Regulatory research and development
NRCS National Regulator for Compulsory Specifications DUE workshop: overview of the technical and administrative regulatory requirements for the energy efficiency of electrical and electronic apparatus
More information(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION
11.11.2010 EN Official Journal of the European Union C 306/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
More information... II.. s:. U".!.! 0 I a'.! n) '4-!J..SZ.ll ~~ Jq~ (Jql.sii.JI u l?o Jq~ GCC Standardization Organization. Designation of a Notified Body
.... II.. s:. U".!.! 0 I a'.! n) '4-!J..SZ.ll ~~ Jq~ (Jql.sii.JI u l?o Jq~ GCC Standardization Organization Designation of a Notified Body The GCC Standardization Organization (GSO) hereby affirms that
More informationSPECIFICITIES OF SUPERVISION OF OVERPRESSURIZED EQUIPMENT
FEDERAL ENVIRONMENTAL, INDUSTRIAL AND NUCLEAR SUPERVISION SERVICE OF RUSSIA SPECIFICITIES OF SUPERVISION OF OVERPRESSURIZED EQUIPMENT V. Chernyshev Deputy Head Department of State Construction Supervision
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Location Certification Scheme Edisonstraat 12A 6902 PK Zevenaar The Netherlands
More informationEnergy Efficient Product Policy in the European Union
Efficient Product Policy in the European Union 29 June 2016 Portuguese Association of Engineers Portuguese Association of HVAC&R Industry Robert Nuij Head of Sector Efficient Products Directorate General
More informationIEC PROJETOS EM VOTAÇÃO
IEC PROJETOS EM VOTAÇÃO IEC/TC 10 - Fluids for electrotechnical applications. ATÉ 25 DE JULHO DE 2014 IEC 60599 Ed.3: Mineral oil-impregnated electrical equipment in service - Guide to the interpretation
More informationTechnical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
More information9 maggio 2016 / 9 May Hotel NH Laguna Palace Mestre (VE)
9 maggio 2016 / 9 May 2016 09.00 18.00 Hotel NH Laguna Palace Mestre (VE) F-GAS and ECODESIGN Venezia 9 maggio 2016 Introduzione all Ecodesign ed all Label D. Polverini DG GROW Unit C1- Clean technologies
More informationListing of standards providing presumption of conformity for List (2) products under Regulation BD
BD-142004-01 List Standards Listing Listing of standards providing presumption of conformity for List products under Regulation BD-142004-01 Ed. 1.0 -February 2018 2018-02-18 The standard references below
More informationProduct Compliance Andy Guest
Product Compliance Andy Guest EDA Forum November 2015 www.thelia.org.uk What do we mean by compliant in lighting? How do we know products are compliant? Its CE Marked That means its OK doesn t it? What
More informationBRÜEL & KJÆR REGULATORY REQUIREMENTS AND MARKINGS
BRÜEL & KJÆR REGULATORY REQUIREMENTS AND MARKINGS This document contains short descriptions of selected national/international safety and environmental requirements with relevance to the handling and shipment
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Activities trading under the names and Kiwa Telefication Fire alarm/detection
More informationSANS 941 Willa Breed. Click to add title. Programme Manager Electrotechnical Standards
SANS 941 Willa Breed Click to add title Programme Manager Electrotechnical Standards Presentation at SABS Convention 2012 SANS 941 Energy Efficiency of Electrical and Electronic Apparatus What does SANS
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX amending Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010,
More information... II.. s::. U II!.! 0 I Q I! n) ~}.St.ll ~I Jq~ (Jql.siLII U" I? o Jq~ GCC Standardization Organization. Designation of a Notified Body
... II.. s::. U II!.! 0 I Q I! n) ~}.St.ll ~I Jq~ (Jql.siLII U" I? o Jq~ GCC Standardization Organization Designation of a Notified Body The GCC Standardization Organization (GSO) hereby affirms that Bureau
More information