SWARCO TRAFFIC SYSTEMS GMBH. TDD1-MW Traffic Detector User Manual TDD1-MW_BE_00

Transcription

1 TDD1-MW Traffic Detector User Manual TDD1-MW_BE_00

2 CONTENTS 1 Introduction About this manual Usage according to regulations Label Symbols Safety instructions About the TDD1-MW traffic detector Application range Working principle Mounting Accessories Technical specifications Electrical connections Technical data Dimensions Configuration Key functions Detector functions model TDD1-MW Detector functions model TDD1-MW EC Declaration of conformity Niederkircher Straße 16, D Trier, T , F , E. detection@swarco.de 2/13

3 1 Introduction In this chapter you will find preliminary remarks about the usage of the TDD1-MW traffic detector, as well as explanations about the structure of this manual and the usage of symbols. 1.1 About this manual On the following pages you will learn how to install and operate the device in an appropriate way. We attach great importance to the safe, appropriate and effective handling of this device. It is therefore important to read this manual thoroughly before using the device. In the manual you will find important instructions helping you to avoid danger and to prolong the reliability and durability of the device and the accessories. For your own safety you should read the safety instructions. Follow the instructions closely in order to avoid danger for yourself and others or damage to the device. If you have any questions about the TDD1-MW which are not answered in this manual, or if you have problems understanding the descriptions, please contact: SWARCO TRAFFIC SYSTEMS GmbH Business Unit Detection Niederkircher Straße Trier Germany Usage according to regulations The TDD1-MW traffic detector is solely suited for the detection of vehicles in traffic. Any further usage is not appropriate. Do not use the TDD1-MW for any other purpose. Niederkircher Straße 16, D Trier, T , F , E. 3/13

4 1.3 Label SWARCO TRAFFIC SYSTEMS GMBH The TDD1-MW is provided with a quality label and serial number. You will need the indications when talking with the customer service, e. g. ordering accessories or spare parts. Note here the serial number and name of the device in order to have them available when needed: Serial number: Device identification: This manual is valid for devices with the following order numbers: RD_TDD1-MW30 RD_TDD1-MW75 D D CE-label: 1.4 Symbols In several places throughout this manual you will find the following symbols stating important safety instructions: ATTENTION! This symbol indicates dangers which might cause damage to people or property NOTE This symbol indicates information for installation and function of the device Niederkircher Straße 16, D Trier, T , F , E. detection@swarco.de 4/13

5 1.5 Safety instructions Read the following safety instructions thoroughly and observe them carefully. They are stated to ensure your own safety and the safety of others and to avoid damage to the device or accessories. ATTENTION! Danger of electricity! Make sure that no liquid may get inside the device. If this happens, interrupt the power supply to the device at once. If you notice any damage, e.g. broken or crushed cables, damaged plugs, enclosures etc., turn off the device at once, interrupt the power supply and make sure that the device cannot accidentally be turned on again. The device may only be installed, brought into service and repaired by an electrotechnical expert. Inappropriate operation, improper maintenance or not observing the instructions in this manual can lead to danger. Any malfunction of the device which may limit the safety of its users or others must be removed immediately. All warning and safety labels on the device must be observed and kept complete and legible. The appropriate usage must be observed by all means. For damage resulting from inappropriate usage the manufacturer will not undertake any liability. The device must not be used as a safety component in the sense of the European Directive 98/37/EC ("Machinery Directive ). In systems with high risk additional safety measures are necessary. The operator of the device must ensure that the chosen means of operation will not cause damage to material or danger to people and that all security and safety installations are present and functioning. Before installation and first operation please observe the instructions in the manual. The manual must be available at the site of usage at any time. It must be read thoroughly and applied appropriately by the person responsible for the operation, maintenance and service of the device. NOTE Our products are in a constant process of improvement and advancement. Because of this, read the current manual thoroughly before installation and first operation. Without prior consent of the manufacturer, no modifications, neither mechanical nor electrical, may be done. Only parts that have the consent of the manufacturer may be used for backfitting or as accessories. Any violations will lead to the termination of conformity and the manufacturer s warranty. The user will subsequently bear the risk. Niederkircher Straße 16, D Trier, T , F , E. detection@swarco.de 5/13

6 2 About the TDD1-MW traffic detector 2.1 Application range The detectors of the TDD1-MW series have been developed for a range of applications that require robust and reliable detection: Green-phase request or extension at traffic lights, with possibility to discriminate by vehicle driving direction Speed-dependent detection of vehicles Door sensor: As detector for auto-operation of doors 2.2 Working principle The TDD1-MW detectors detect moving objects by means of the frequency shift of the reflected microwave vs. the transmitted waves. Several application-dependent features can be configured easily and effortlessly using the IR remote control (extra accessory): Direction-discrimination (approaching, receding, both) Detection range (depending on model) Minimum speed threshold (4 km/h, 8 km/h) Auto-timer output activation (off, 90 s, 150 s) Feedback LED on front of detector (on, off) 2.3 Mounting The recommended mounting location is on a pole at the side of the road, approximately 1 to 5 m above ground. 2.4 Accessories IR Remote Control: To customize the settings of the detector, an infrared remote control is required. The remote control is an extra accessory and has to be ordered separately. Order number: RD_TDD1_IRF (D ) Mounting Accessories: Pole mount adapter for mounting the detector on a round pole. The pole mount adapter is an extra accessory and has to be ordered separately. Order number: RD_TDC_PMA (D ) Connection Cable: An according connection cable is necessary for the electrical connection of the detector. This cable is an extra accessory and has to be ordered separately. Order number: RD_TDD1_Cable15m (D ) Niederkircher Straße 16, D Trier, T , F , E. detection@swarco.de 6/13

7 3 Technical specifications 3.1 Electrical connections In order to easily mount or quickly exchange the detector, the cable is connected with the detector by means of a plug. The pin assignment of the socket is listed as follows: Pin Color code* Connection 1 White V+ Supply voltage (5 48) V DC / (12 43) V AC 2 Brown V- Supply voltage / GND 3 Green Relay: Common 4 Yellow Relay: Normally open 5 Grey Relay: Normally closed 6 and 7 Pink/Free Reserved *Connection code for the optionally available connection cable Table 1 Pin assignment cable socket 3.2 Technical data Supply Voltage Power Consumption Output / Switch* Function indication Turn-on time (5 48) V DC / (12 43) V AC typ V DC Dimensions See Figure 1 Case Material Weather protection Weight Doppler Radar Detection Range Low speed threshold Operating Temperature Humidity Sealing Relay, SPDT / 300 V AC / 2 A / 60 W Tri-color LED on front of detector typ. 1 second after power on Polycarbonate, dark grey Stainless steel V4A approx. 700 g incl. bracket (approx. 560 g with plug) K-Band GHz GHz TDD1-MW30: 30 m nominal TDD1-MW75: 75 m nominal 4 km/h / 8 km/h (selectable) -40 C to +70 C 95 % RH max. IP 64 splash proof * The maximum voltage on the output must not exceed the supply voltage! Table 2 Technical data Niederkircher Straße 16, D Trier, T , F , E. detection@swarco.de 7/13

8 3.3 Dimensions Figure 1 Dimensions (incl. plug) Niederkircher Straße 16, D Trier, T , F , E. detection@swarco.de 8/13

9 4 Configuration The different application-dependent functions can easily and comfortably be configured by means of the optionally available IR remote control. Two different remote control devices are currently available. 4.1 Key functions Key Function Front LED flash pattern Directional discrimination Low speed threshold Detection Range Periodic auto-trigger Feedback front-led Table 3 Key functions 1. Press until the detector s feedback LED shows the color of the function (next to the key on the remote) you d like to access. 2. Press the function-key until the color of the feedback LED corresponds to the desired setting (see table above). 3. Press function-key again to confirm the new setting. Niederkircher Straße 16, D Trier, T , F , E. detection@swarco.de 9/13

10 4.2 Detector functions model TDD1-MW30 Figure 2 Detector functions model TDD1-MW30 Niederkircher Straße 16, D Trier, T , F , E. detection@swarco.de 10/13

11 4.3 Detector functions model TDD1-MW75 Figure 3 Detector functions model TDD1-MW75 Niederkircher Straße 16, D Trier, T , F , E. detection@swarco.de 11/13

12 5 EC Declaration of conformity Niederkircher Straße 16, D Trier, T , F , E. 12/13

13 SWARCO TRAFFIC SYSTEMS GMBH Niederkircher Straße 16 D Trier All rights reserved Niederkircher Straße 16, D Trier, T , F , E. 13/13