CH 4 C 2 H 2 C 3 H 8 CO 2 H 2 H 2 S HFC NH 3 NO 2 O 2 O 3 SO 2

Transcription

1 PluraSens CH 4 C 2 H 2 C 3 H 8 CO CO 2 H 2 H 2 S HFC NH 3 NO 2 O 2 O 3 SO 2 VOC E2600 Family Gas Detectors

2 E2610 Series Compact wall-mount housing providing optimal airflow Integrated sensor with long lifetime ( years) Wide operating temperature range (-40/-30 to +70 C) Available for combustible gases, Ammonia, VOC and Carbon Monoxide Easy installation and maintenance High accuracy and stability Two relays with switch-over contact Flashing LED and an internal buzzer Available with 230 VAC or 24 VDC power supply Affordable price and low maintenance costs

3 E2611 Series 4-20mA 0-10V RS485 Modbus Compact wall-mount housing providing optimal airflow Integrated accurate and stable sensor with long lifetime ( years) Wide operating temperature range (-40/-30 to +70 C) Available for Combustibles, Ammonia and Volatile Organic Compounds Two independent user configurable analog outputs 0-10 V / 4-20 ma interface for Fieldbus networking Two configurable relays with closing contact, internal buzzer option Available with 230 VAC or 24 VDC power supply Easy installation and maintenance Affordable price and low maintenance costs

4 E2618 Series IP mA 0-10V RS485 Modbus 24 VDC powered point transmitters for gas detection systems Dust- and watertight enclosure for harsh environment Available for wide range of combustible, toxic gases and oxygen Attached, duct-mount or remote sensor probe options Two independent user configurable analog outputs 0-10 V / 4-20 ma interface for Fieldbus networking Easy installation and maintenance Competitive price and low maintenance costs

5 E2608 Series IP mA 0-10V RS485 Modbus Dust- and watertight enclosure for harsh environment Available for wide range of combustible, toxic gases and oxygen Attached, duct-mount or remote sensor probe options Two independent user configurable analog outputs 0-10 V / 4-20 ma interface for Fieldbus networking Two configurable relays with closing contact Available with 230 VAC or 24 VDC power supply Easy installation and maintenance Competitive price and low maintenance costs

6 Hydrogen detection Mandatory in confined spaces, where potentially explosive concentration of hydrogen gas can accumulate as a result of generation or leaks. As hydrogen is lighter than air and tends to rise up, hydrogen detectors should be mounted near the ceiling in proximity to potential sources. Recommended coverage area for each hydrogen detector is m 2 and corresponding coverage radius m. Battery charging rooms Gas cylinders storage Gas testing equipment, gas blending benches Wastewater treatment plants Laboratories, research environment Vehicle fuel cells, hydrogen filling stations Type E2610-LEL E2611-H2 E2618-H2 E2608-H2 Enclosure IP20 - dry rooms IP20 - dry rooms IP65 - damp rooms IP65 - damp rooms Semiconductor type, integrated Semiconductor type, integrated Outputs - Semiconductor or catalytic type, Alarms Blinkng LED & Buzzer Buzzer - - Relays 2 x SPDT 2 x SPST - 2 x SPST Semiconductor or catalytic type, Power 24 VDC / 230 VAC 24 VDC / 230 VAC 24 VDC 24 VDC / 230 VAC E2600 series combustible gas detectors operate in the range % LEL and are intended for safe (not ATEX rated) areas.

7 Methane detection Mandatory in confined spaces, where potentially explosive concentration of methane (natural gas) can accumulate as a result of generation or leaks. As methane is lighter than air and tends to rise up, methane detectors should be mounted near the ceiling in proximity to potential sources. Recommended coverage area for each methane detector is m 2 and corresponding coverage radius m. Boiler rooms, commercial kitchens Biogas production plants Gas pipelines and compressor stations Gas blending and testing equipment, cylinders storage Wastewater treatment plants Laboratories, research environment Type E2610-LEL E2611-CH4 E2618-CH4 E2608-CH4 Enclosure IP20 - dry rooms IP20 - dry rooms IP65 - damp rooms IP65 - damp rooms Semiconductor type, integrated Semiconductor type, integrated Outputs - Semiconductor or catalytic type, Alarms Blinkng LED & Buzzer Buzzer - - Relays 2 x SPDT 2 x SPST - 2 x SPST Semiconductor or catalytic type, Power 24 VDC / 230 VAC 24 VDC / 230 VAC 24 VDC 24 VDC / 230 VAC E2600 series combustible gas detectors operate in the range % LEL and are intended for safe (not ATEX rated) areas.

8 LPG detection Mandatory in confined spaces, where potentially explosive concentration of liquefied petroleum gas (LPG) can accumulate as a result of leaks. As butane and propane, the main constituents of LPG, are heavier than air and tend to sink down, LPG detectors should be mounted near the floor in proximity to potential sources. Recommended coverage area for each LPG detector is m 2 and corresponding coverage radius m. LPG plants and facilities LPG boiler houses, commercial kitchens Underground parkings, storage rooms Laboratories, research environment Type E2610-LEL E2611-LPG E2618-LPG E2608-LPG Enclosure IP20 - dry rooms IP20 - dry rooms IP65 - damp rooms IP65 - damp rooms Semiconductor type, integrated Semiconductor type, integrated Outputs - Semiconductor or catalytic type, Alarms Blinkng LED & Buzzer Buzzer - - Relays 2 x SPDT 2 x SPST - 2 x SPST Semiconductor or catalytic type, Power 24 VDC / 230 VAC 24 VDC / 230 VAC 24 VDC 24 VDC / 230 VAC E2600 series combustible gas detectors operate in the range % LEL and are intended for safe (not ATEX rated) areas.

9 Ammonia detection Ammonia is a highly hazardous toxic and corrosive chemical, used as a refrigerant (R717) for very low temperatures. EU Standard EN378:2008 requires that all plants with a charge over 50 kg NH 3 must have a gas detection system installed. Ammonia emissions from animal waste in intensive livestock and poultry farms may affect animal health and productivity. As ammonia is lighter than air and tend to rise up, NH 3 detectors should be mounted near the ceiling in proximity to potential leak sources, or located in breathing area. Recommended coverage area for each NH 3 detector is m 2 and corresponding coverage radius m. Large industrial refrigeration systems Animal agriculture (livestock and poultries) Fertilizer production and storage Laboratories, research environment Type E2610-NH3 E2611-NH3 E2618-NH3 E2608-NH3 Enclosure IP20 - dry rooms IP20 - dry rooms IP65 - damp rooms IP65 - damp rooms Semiconductor type, integrated Semiconductor type, integrated Outputs - Semiconductor or electrochemical type, Alarms Blinkng LED & Buzzer Buzzer - - Relays 2 x SPDT 2 x SPST - 2 x SPST Semiconductor or electrochemical type, Power 24 VDC / 230 VAC 24 VDC / 230 VAC 24 VDC 24 VDC / 230 VAC E2600 series gas detectors are intended for safe (not ATEX rated) areas.

10 Halocarbon detection Halocarbon based refrigerant gas leaks should be detected, as older сhlorofluorocarbons (CFCs) are ozone-depleting and newer hydrofluorocarbons (HFCs) are relatively expensive. Refrigerant leaks may also result in dangerous displacement of oxygen in closed rooms. As halocarbon refrigerants are heavier than air and tend to sink down, refrigerant gas detectors should be mounted close to the floor in proximity to potential leak sources. Recommended coverage area for each refrigerant detector is m 2 and corresponding coverage radius m. Cold storage warehousing Refrigerated plants Mechanical/Chiller Rooms Ice Scating Arenas Type E2618-HFC E2608-HFC Enclosure IP65 - damp rooms IP65 - damp rooms Outputs Semiconductor type, Alarms - - Semiconductor type, Relays - 2 x SPST Power 24 VDC 24 VDC / 230 VAC E2600 series gas detectors are intended for safe (not ATEX rated) areas.

11 Carbon Monoxide detection Carbon monoxide (CO) is a highly toxic, colorless and odorless gas. Monitoring is required in places where CO may be formed from incomplete combustion. CO is very close to the same density as air, so the gas tends to spread evenly in the room. Carbon monoxide detectors should be mounted in the breathing zone at a height ~1,5 m from the floor in proximity to potential leak sources. Recommended coverage area for each CO detector is m 2 and corresponding coverage radius m. Indoor parking, vehicle service centers Boiler and burner rooms Factories and warehouses Tunnels Wastewater treatment plants Incineration facilities Type E2610-CO E2618-CO E2608-CO Enclosure IP20 - dry rooms IP65 - damp rooms IP65 - damp rooms Electrochemical type, integrated Electrochemical type, attached, duct or remote Outputs - Alarms Blinkng LED & Buzzer - - Relays 2 x SPDT - 2 x SPST Electrochemical type, attached, duct or remote Power 24 VDC / 230 VAC 24 VDC 24 VDC / 230 VAC E2600 series CO gas detectors are intended for safe (not ATEX rated) areas.

12 Carbon Dioxide detection Carbon dioxide (CO 2 ) level is a primary indicator of indoor air quality. Monitoring of CO 2 is required for demand controlled ventilation in occupied places, to prevent oxygen depletion by CO2 leaks in confined rooms, and to ensure optimal atmosphere for growth of plants and mushrooms. CO 2 is slightly heavier air, but the gas tends to spread evenly in the room. Carbon dioxide detectors should be mounted in the breathing zone at a height ~1,5 m from the floor. Recommended coverage area for each CO 2 detector is m 2 and corresponding coverage radius m. Public buldings, theaters, cinemas, concert halls HVAC in office buildings, hotels Factories, refrigeration facilities Greenhouses and mushroom plants Type E2609-CO2 E2618-CO2 E2608-CO2 Enclosure IP20 - dry rooms IP65 - damp rooms IP65 - damp rooms Outputs Optical NDIR type, integrated 0-10 V Optical NDIR type, attached, duct or remote Alarms Relays 1 x SPDT - 2 x SPST Optical NDIR type, attached, duct or remote Power 24 VDC 24 VDC 24 VDC / 230 VAC E2600 series CO 2 gas detectors are intended for safe (not ATEX rated) areas.

13 Oxygen detection Oxygen may be dangerously displaced in closed rooms by other neutral gases, like argon, refrigerants, CO 2 etc. Oxygen depletion detectors should be mounted in the breathing zone at a height ~1,5 m from the floor. Recommended coverage area for each O 2 detector is m 2 and corresponding coverage radius m. Inert gas storages, confined spaces Modified atmospheres (filling of windows and packages) Nitrogen blanketing in industrial processes Incubators, fermentation vessels Type E2618-O2 E2608-O2 E2811-RP33-O2 Enclosure IP65 - damp rooms IP65 - damp rooms IP65 - damp rooms Outputs Electrochemical type, attached, duct or remote Electrochemical type, attached, duct or remote Alarms Relays - 2 x SPST - Electrochemical type, Zigbee wireless, range m Power 24 VDC 24 VDC / 230 VAC 3V Li battery, up to 3 years E2600 / E2800 series gas detectors are intended for safe (not ATEX rated) areas.

14 Ozone detection Ozone is a non-flammable gas, colorless to blue in color with very pungent odor. It is a powerful oxidizer, attacks the eyes and respiratory system and can cause pulmonary edema. Used as powerful desinfectant and purifier agent. Swimming pools, spas Food processing and preservation Water treatment and purification Air purification and sterilization Type E2618-O3 E2608-O3 E2811-RP33-O3 Enclosure IP65 - damp rooms IP65 - damp rooms IP65 - damp rooms Outputs Electrochemical type, attached, duct or remote Electrochemical type, attached, duct or remote Alarms Relays - 2 x SPST - Electrochemical type, Zigbee wireless, range m Power 24 VDC 24 VDC / 230 VAC 3V Li battery, up to 3 years E2600 / E2800 series gas detectors are intended for safe (not ATEX rated) areas.

15 Acetylene detection Acetylene is colorless combustible gas slightly lighter than air. It is widely used in metal welding and cutting. Leaks of acetylene should be carefully monitored, as it is highly explosive material. Metal welding and cutting Cylinder storage rooms Industry Laboratories, research environment Type E2610-LEL E2611-C2H2 E2618-C2H2 E2608-C2H2 Enclosure IP20 - dry rooms IP20 - dry rooms IP65 - damp rooms IP65 - damp rooms Semiconductor type, integrated Semiconductor type, integrated Outputs - Semiconductor or catalytic type, Alarms Blinkng LED & Buzzer Buzzer - - Relays 2 x SPDT 2 x SPST - 2 x SPST Semiconductor or catalytic type, Power 24 VDC / 230 VAC 24 VDC / 230 VAC 24 VDC 24 VDC / 230 VAC E2600 series gas detectors are intended for safe (not ATEX rated) areas.

16 Ethylene detection Extremely flammable colourless gas. Widely used as a row material in polymer industry and as a fruit ripener. Detection is mandatory in confined spaces, where potentially explosive concentration of ethylene can accumulate as a result of leaks. Agriculture Industry Gas storage rooms Laboratories, research environment Type E2618-C2H4 E2608-C2H4 Enclosure IP65 - damp rooms IP65 - damp rooms Outputs Electrochemical Alarms - - Electrochemical Relays - 2 x SPST Power 24 VDC 24 VDC / 230 VAC E2600 series gas detectors are intended for safe (not ATEX rated) areas.

17 Sulfur dioxide detection Sulfur dioxide is colourless gas with pungent odour. It is an intermediate in the production of sulfuric acid. SO 2 is used as reductant, as bleaching agent for delicate materials and as a preservative in food industry and winemaking. Sulfur dioxide is toxic when inhaled. As sulfur dioxide is heavier than air and tend to sink down, refrigerant gas detectors should be mounted at cm above the floor in proximity to potential leak sources. Chemical industry Winemaking Food processing and preservation Laboratories Type E2618-SO2 E2608-SO2 Enclosure IP65 - damp rooms IP65 - damp rooms Outputs Electrochemical, Alarms - - Electrochemical, Relays - 2 x SPST Power 24 VDC 24 VDC / 230 VAC E2600 series gas detectors are intended for safe (not ATEX rated) areas.

18 Chlorine detection Cl 2 Clorine is yellow-greenish gas with pungent odour. It is used as desinfectant and bleaching agent in the manufacturing of industrial and consumer products. Chlorine is a toxic gas that irritates the respiratory system. Being a strong oxidizer, it may react with flammable materials. As chlorine is heavier than air and tend to sink down, detectors should be mounted close to the floor in proximity to potential leak or generation sources. Chemical and polymer industry Swimming pools Water treatment plants Laboratories Type E2618-Cl2 E2608-Cl2 Enclosure IP65 - damp rooms IP65 - damp rooms Outputs Electrochemical, Alarms - - Electrochemical, Relays - 2 x SPST Power 24 VDC 24 VDC / 230 VAC E2600 series gas detectors are intended for safe (not ATEX rated) areas.

19 Nitrogen dioxide detection Nitrogen dioxide is brown gas with pungent odour. It is formed in most combustion processes when using air as the oxidant. Nitrogen dioxide is toxic when inhaled. At low concentrations it anesthetizes the nose, thus creating a potential for overexposure. As nitrogen dioxide is heavier than air and tends to sink down, detectors should be mounted close to the floor in proximity to potential sources. Indoor parkings, skating arenas, tunnels Thermal power stations Pulp mills Laboratories Type E2618-NO2 E2608-NO2 Enclosure IP65 - damp rooms IP65 - damp rooms Outputs Electrochemical, Alarms - - Relays - 2 x SPST Electrochemical, Power 24 VDC 24 VDC / 230 VAC E2600 series gas detectors are intended for safe (not ATEX rated) areas.

20 Hydrogen sulfide detection Colorless gas with charasteristic odour of rotten eggs. It is slightly heavier than air, very poisonous, corrosive, flammable, and explosive. At high concentrations it causes the paralysis of olfactory nerve, which increase the risk of overexposure. Hydrogen sulfide results from anaerobic decay of organic matter, e.g. in sinks, sewers etc. Wastewater and sewage treatment plants Paper and pulp mills Food and beverages industry Laboratories Type E2618-H2S E2608-H2S Enclosure IP65 - damp rooms IP65 - damp rooms Outputs Electrochemical, Alarms - - Electrochemical, Relays - 2 x SPST Power 24 VDC 24 VDC / 230 VAC E2600 series gas detectors are intended for safe (not ATEX rated) areas.

21 Battery Charging Rooms Safety of battery back-up installations for various electronic systems has to be monitored. As lead acid batteries are charged, hydrogen gas is produced, which may accumulate and reach hazardous combustible levels in confined spaces. Gas Typical range Transmitter Detector Hydrogen H %LEL E2618-H2 E2608-H2 E2610-LEL E2611-H2 Boiler Houses Control of leaks of combustible gases and Carbon Monoxide Gas Typical range Transmitter Detector Carbon Monoxide CO ppm E2618-CO Methane CH %LEL E2618-CH4 Propane C 3 H %LEL E2618-LPG E2608-CO E2610-CO E2608-CH4 E2610-LEL E2611-CH4 E2610-LEL E2611-LPG E2608-LPG Hotels, Libraries, Restaurants Control of indoors air quality and leaks of refrigerants Gas Typical range Transmitter Detector Carbon Dioxide CO ppm E2618-CO2 E2608-CO2 E2609-CO2 Halocarbon Refrigerants ppm E2618-HFC E2608-HFC

22 Ice Scating Arenas Air quality of public indoor environments has to be monitored for people safety. Ice resurfacing equipment operated in closed arenas releases CO and NO 2 gases from the burning of fuel. Dehumidification equipment can lead CO gas into the ventilation system. Leaks of refrigerant gases (propane, halocarbons, ammonia) can occur in refrigeration equipment. Gas Typical range Transmitter Detector Carbon Monoxide CO ppm E2618-CO E2608-CO E2610-CO Nitrogen Dioxide NO ppm E2618-NO2 E2608-NO2 Propane C 3 H %LEL E2618-LPG Ammonia NH ppm E2618-NH3 E2608-LPG E2610-LEL E2608-NH3 E2610-NH3 Halocarbon Refrigerants ppm E2618-HFC E2608-HFC Indoor Parking and Service Garages By monitoring the concentration of toxic vehicle exhaust fumes and ventilating based on their concentration, a safe environment in garages and economical ventilation can be ensured. For gasoline, natural gas, propane powered vehicles, CO should be detected. For vehicles with diesel engines, NO 2 levels should be measured. Alternatively, CO 2 as general air quality indicator may be monitored. Gas Typical range Transmitter Detector Carbon Monoxide CO ppm E2618-CO E2608-CO E2610-CO Nitrogen Dioxide NO ppm E2618-NO2 E2608-NO2 Carbon Dioxide CO ppm E2618-CO2 E2608-CO2 E2609-CO2

23 Pulp and Paper Industry Pulp and paper mills can present many dangerous situations, which can be significantly decreased by utilizing toxic gas monitoring. Gas Typical ranges Transmitter Detector Hydrogen Sulfide H 2 S ppm E2618-H2S E2608-H2S Sulfur Dioxide SO ppm E2618-SO2 E2608-SO2 Food and Beverages Industry Whether pre-cooking food, treating wastes and byproducts or ensuring food is preserved properly for shipment, food and beverage processors use and produce dangerous gases. As a result, gas detection is an important part of the everyday safety requirements for these processing facilities. Gas Typical ranges Transmitter Detector Propane C 3 H %LEL E2618-LPG Carbon Monoxide CO ppm E2618-CO Carbon Dioxide CO ppm E2618-CO2 E2608-LPG E2610-LEL E2608-CO E2610-CO E2608-CO2 E2609-CO2 Nitrogen Dioxide NO ppm E2618-NO2 E2608-NO2 Hydrogen Sulfide H 2 S ppm E2618-H2S E2608-H2S Ammonia NH ppm E2618-NH3 E2608-NH3 E2610-NH3 Halocarbon Refrigerants ppm E2618-HFC E2608-HFC Volatile Organic Compounds VOC ppm %LEL E2618-VOC E2608-VOC E2610-VOC E2611-VOC Oxygen Deficiency O %vol E2618-O2 E2608-O2 Ozone O ppm E2618-O3 E2608-O3

24 Refrigeration Leaks of refrigerant gases (propane, halocarbons, ammonia, CO 2 ) can occur in refrigeration equipment. Refrigerant leaks may also result in dangerous displacement of oxygen in closed rooms. Gas Typical range Transmitter Detector Carbon Dioxide CO ppm E2618-CO2 Propane C 3 H %LEL E2618-LPG Ammonia NH ppm E2618-NH3 E2608-CO2 E2609-CO2 E2608-LPG E2610-LEL E2608-NH3 E2610-NH3 Halocarbon Refrigerants ppm E2618-HFC E2608-HFC Solvent Storages and Painting Chambers Toxic and flammable vapors of volatile organic compounds (VOC), like ethanol, toluene, xylene may accumulate and reach hazardous combustible levels in confined spaces. Gas Typical ranges Transmitter Detector Volatile Organic Compounds VOC ppm %LEL E2618-VOC E2608-VOC E2610-VOC E2611-VOC Swimming Pools and Spas Control of leaks of water desinfectants Cl 2 and O 3 to ensure safety of people. Gas Typical range Transmitter Detector Chlorine Cl ppm E2618-CL2 E2608-CL2 Ozone O ppm E2618-O3 E2608-O3

25 Wastewater Treatment Wastewater treatment process creates a range of inert, toxic and combustible gases, which can build up in enclosed spaces or deplete oxygen to endanger plant personnel, and therefore shall be monitored. Gas Typical range Transmitter Detector Methane CH %LEL E2618-CH4 E2608-CH4 Hydrogen H %LEL E2618-H2 E2608-H2 Hydrogen Sulfide H 2 S ppm E2618-H2S E2608-H2S Carbon Monoxide CO ppm E2618-CO E2608-CO Oxygen Deficiency O %vol E2618-O2 E2608-O2 Chlorine Cl ppm E2618-CL2 E2608-CL2 Sulfur Dioxide SO ppm E2618-SO2 E2608-SO2 Ozone O ppm E2618-O3 E2608-O3 Workshops and Welding Toxic and flammable gases and oxygen deficiency must be monitored for worker safety. Gas Typical range Transmitter Detector Acetylene C 2 H %LEL E2618-C2H2 E2608-C2H2 Nitrogen Dioxide NO ppm E2618-NO2 E2608-NO2 Carbon Dioxide CO ppm E2618-CO2 E2608-CO2 Carbon Monoxide CO ppm E2618-CO E2608-CO Oxygen Deficiency O %vol E2618-O2 E2608-O2 Ozone O ppm E2618-O3 E2608-O3