ISO/TC 211 Geographic information/geomatics Secretariat: SN (Norway)
|
|
- Ernest Kristopher Tyler
- 5 years ago
- Views:
Transcription
1 ISO/TC 211 N Number of pages: 12 ISO/TC 211 Geographic information/geomatics Secretariat: SN (Norway) Document type: Resolutions Title: Source: Resolutions from the 42nd ISO/TC 211 plenary meeting in Tromsø, Norway, /17 ISO/TC 211 plenary Expected action: Info Meeting date/location: /17, Tromsø, Norway A to secretary: bjs@standard.no Committee URL: and
2 ISO/TC 211 N 4320 Resolutions of the 42nd plenary meeting of ISO/TC 211 Tromsø, Norway, /17 Liaison with Small Business Standards ISO/TC 211 appreciates and accepts the request for a category A liaison from Small Business Standards, and instructs the secretariat to inform the ISO Central Secretariat of its approval. Progress of the revision of ISO :2008 ISO/TC 211 notes that WG 6 has revised ISO :2008 according to the comments received at systematic review and through discussions in the project team. Noting that the comments have been resolved, ISO/TC 211 decides to omit the committee draft stage. ISO/TC 211 requests that the WG 6 convenor distributes the updated version to the WG for their approval, and that the document is forward to the secretariat for a six weeks review by the members. If there are no objections, it will be sent to ISO for DIS ballot. Progress of the revision of ISO 19126:2009 ISO/TC 211 confirms the allocation of project to WG 7. Progress of the revision of ISO 19112:2003 ISO/TC 211 confirms the allocation of project to WG 1. Progress of the revision of ISO 19123:2005 ISO/TC 211 confirms the allocation of project to WG 6. Registration of new project ISO New project (Stage 20.00): ISO/NP 19166, Geographic information BIM to GIS conceptual mapping (B2GM) Submitted by: NMB of Republic of Korea Project Leader: Dr. Tae Wook Kang, Republic of Korea 2
3 Approval date: Target date for IS: The project is assigned to WG 10. Registration of new project ISO New project (Stage 20.00): ISO/NP , Geographic information Geodetic references -- Part 1: The International Terrestrial Reference System (ITRS) Submitted by: NMB of France Project Leader: Dr. Claude Boucher, France Editor: Mr. Thierry Gattacceca, France Approval date: Target date for IS: The project is assigned to WG 4. Registration of new project ISO 19157:2013 Amendment 1 New project (Stage 30.00): ISO 19157:2013 Amendment 1, Geographic information Data quality Amendment 1: Describing data quality using coverages Submitted by: ISO/TC 211 Secretariat Project Leader: Mr. David Danko, USA Approval date: Target date for IS: The project is assigned to WG 9. ISO/TC 211 requests that the WG 9 convenor distributes the updated version to the WG for their approval, and that the document is forward to the secretariat for a six weeks review by the members. If there are no objections, it will be sent to ISO for DIS ballot. Registration of new project ISO (revision of ISO 19111:2007) 3
4 New project (Stage 20.20): ISO/NP , Geographic information Spatial referencing by coordinates Part 1: Fundamentals Submitted by: International Association for Geodesy (IAG), GGOS Bureau of Products and Standards Project Leader: Mr. Roger Lott, United Kingdom Approval date: Target date for IS: The project is assigned to WG 9. Registration of new project ISO (revision of ISO 19116:2004) New project (Stage 20.00): ISO/NP 19116, Geographic information Positioning services Submitted by: NMB of Japan Project Leader: Mr. Tetsuya Gunji, Japan Editor: Mr. Reese Plews, Japan Approval date: Target date for IS: The project is assigned to WG 4. Registration of new project ISO New project (Stage 30.00): ISO/NP , Geographic information Schema for coverage geometry and functions Part 2: Coverage Implementation Schema Submitted by: Open Geospatial Consortium (OGC) Project Leader: Mr. Peter Baumann, OGC Approval date: Target date for IS: The project is assigned to WG 6. Noting that there were only one substantial comment, and that this is resolved, ISO/TC 211 resolves to omit the committee draft stage. 4
5 ISO/TC 211 requests that WG 6 convenor distributes the updated version to the WG for their approval, and that the document is forwarded to the secretariat for a six weeks review before it is sent to ISO for DIS ballot. Registration of new project ISO New project (Stage 20.00): ISO/NP , Addressing Part 2: Good practices for address assignment schemes Submitted by: World Bank Project Leader: Ms. Catherine D. Farvacque-Vitkovic, World Bank Editor: Mr. Tony Braun, World Bank Approval date: Target date for IS: The project is assigned to WG 7. Registration of new project ISO (revision of ISO 19131:2007) New project (Stage 20.20): ISO/NP 19131, Geographic information Data product specifications Submitted by: NMB of Sweden Project Leader: Mr. Anders Skog, Sweden Approval date: Target date for IS: The project is assigned to WG 9. Registration of new project ISO (revision of ISO 19142:2010) New project (Stage 30.00): ISO/NP 19142, Geographic information Web Feature Service Submitted by: Open Geospatial Consortium (OGC) 5
6 Project Leader: Mr. Peter Vretanos, OGC Approval date: Target date for IS: The project is assigned to WG 4. This new project replaces the ongoing project. Registration of new project ISO (revision of ISO 19143:2010) New project (Stage 30.00): ISO/NP 19143, Geographic information Filter encoding Submitted by: Open Geospatial Consortium (OGC) Project Leader: Mr. Peter Vretanos, OGC Approval date: Target date for IS: The project is assigned to WG 4. This new project replaces the ongoing project. Registration of ISO/CD 19127, Geographic information Geodetic register, as DIS (revision of ISO 19127:2005) ISO/TC 211 instructs the secretariat to update document N 4247 according to the proposal from the editing committee, given in document N 4311, and forward ISO/CD to the ISO Central Secretariat for DIS ballot. Publication of ISO/DTS 19157, Geographic information - Data quality - Part 2: XML schema implementation ISO/TC 211 instructs the secretariat to forward document N 4273 to the ISO Central Secretariat for publication. 6
7 Imagery sensor models for geopositioning - Implementation schema ISO/TC 211 recognizes the need for a new XML schema for the encoding of ISO and ISO/TC 211 appreciates and accepts the offer from the NMB of China to propose the NWIP for , Geographic information - Imagery sensor models for geopositioning - Part 3: Implementation schema. Systematic review of ISO 19134:2007, Geographic information Location-based services Multimodal routing and navigation Noting the results of the systematic review of ISO 19134:2007 (N 4253), ISO/TC 211 resolves to confirm this standard. ISO/TC 211 instructs the secretariat to inform the ISO Central Secretariat about its decision. Systematic review of ISO 19137:2007, Geographic information Core profile of the spatial schema Noting the results of the systematic review of ISO 19137:2007 (N 4254), ISO/TC 211 resolves to confirm this standard, with a plan to initiate revision when ISO is published. ISO/TC 211 instructs the secretariat to inform the ISO Central Secretariat about its decision. Systematic review of ISO :2005, Geographic information Metadata XML schema implementation Part 2: Extensions for imagery and gridded data Noting the results of the systematic review of ISO :2005 (N 4255), ISO/TC 211 resolves to confirm this standard and to withdraw it when ISO is published. ISO/TC 211 instructs the secretariat to inform the ISO Central Secretariat about its decision. Systematic review of ISO 19146:2010, Geographic information Cross-domain vocabularies Noting the results of the systematic review of ISO 19146:2010 (N 4256), ISO/TC 211 resolves to revise the standard. ISO/TC 211 instructs the secretariat to send out a call for project leader and experts to the project. The project is allocated to WG 1. 7
8 Systematic review of ISO/TS :2012, Geographic information Ontology Part 1: Framework Noting the results of the systematic review of ISO/TS :2012 (N 4257), ISO/TC 211 resolves to confirm this technical specification. ISO/TC 211 instructs the secretariat to inform the ISO Central Secretariat about its decision. Systematic review of ISO/TS 19158:2012, Geographic information Quality assurance of data supply Noting the results of the systematic review of ISO/TS 19158:2012 (N 4258), ISO/TC 211 resolves to confirm this technical specification. ISO/TC 211 instructs the secretariat to inform the ISO Central Secretariat about its decision. Recommendations on vote on systematic reviews ISO/TC 211 recognizes that the upcoming systematic reviews have a number of standards where the members are requesting guidance on how to vote. ISO/TC 211 recommends the following for systematic reviews with due date : ISO 19105:2000 Geographic information Conformance and testing Recommendation: Revise to align with recommendations on modular standards (N 3110, N 3165, N 3205) ISO 19132:2007 Geographic information Location-based services Reference model Recommendation: Confirm, noting important developments such as Smart Cities and Internet of Things; consider revision at a later stage based on guidance from the ad hoc group on LBS. Ad hoc group on classification issues Noting the comments on the revision of ISO (N 3982), ISO/TC 211 decides to establish an ad hoc group on the topic of geographic information classification schemes. The ad hoc group shall develop and present their scope of work for discussion at the next plenary. The ISO/TC 211 accepts the offer from the WG 7 Convenor, Mr. Antony Cooper, to chair the group. 8
9 ISO/TC 211 instructs the secretariat to send out a call for members of the group before the end of June. Joint work with ISO/TC 59/SC 13 Buildings and civil engineering works Organization of information about construction works Noting the ongoing discussion in WG 10 concerning the GIS-BIM integration and previous resolutions (575, 605, 690), ISO/TC 211 instructs the secretariat to contact the ISO/TC 59/SC 13 secretariat to discuss how to organize joint work between the two committees. Creation of harmonized models at an early stage ISO/TC 211 resolves that every project in ISO/TC 211 that includes a UML model shall create and validate the model in the Harmonized Model before the document becomes a Committee Draft or Draft Technical Specification. In order to support this, the need for a UML model should be explicit in the new work item proposals, and member bodies are encouraged to nominate required expertise. Nomination of representatives from ISO/TC 211 to UN-GGIM session 6 ISO/TC 211 nominates the following delegation to the 6th session of the UN Committee of Experts on GGIM: Mr. Olaf Østensen Mr. Chris Body Ms. Jeanne Foust Liaison representatives ISO/TC 211 appreciates and accepts the following nominations of liaison representatives: Mr. Larry Hothem, USA to IAG Mr. Larry Hothem, USA to FIG Mr. Larry Hothem, USA to SCAR Ad hoc group on best practices for UML modelling in ISO/TC 211 ISO/TC 211 expresses its appreciation to the ad hoc group on best practices for UML modelling and its convenor, Mr. Knut Jetlund, for their work. ISO/TC 211 resolves to disband the group, and transfers the responsibilities of the group to HMMG. 9
10 Geographic information standards wiki ISO/TC 211 thanks the International Cartographic Association for its initiative to establish and host a wiki for geographic information standards (ISO/TC 211, OGC and IHO), and the contribution by Stuttgart University of Applied Sciences. ISO/TC 211 encourages its members to maintain the wiki. Offers to host the Secretariat for ISO/TC 211 ISO/TC 211 thanks the national bodies of China, Sweden and Turkey for offering to take on the ISO/TC 211 Secretariat. Further, noting the TMB resolution 66/2016, ISO/TC 211 congratulates Swedish Standards Institute on being selected and looks forward to their successful leadership of ISO/TC 211 from January Acclamation 10
11 Adjustment of target dates of the ISO/TC 211 programme of work Bold = Delivered documents Project no WG CD DIS FDIS IS/TS (Rev) (Rev.) Under publication (Rev.) CD (Rev.) (Rev) (Rev) (Rev) Under publication (Rev) (Rev) (Rev) (Rev) (Rev) (rev) (Rev) (Rev) TS (Rev) (Rev) Amd TS TS Stage Stage 0 Review summary Requirements concerning subsequent meetings ISO/TC 211 adopts the following meeting schedule: 43rd plenary /12-02 Redlands, CA, USA 44th plenary /06* Stockholm, Sweden Facilities for WG meetings, editing committees, project teams and other meetings will be provided prior to the plenary, as required. *To be decided 11
12 Appreciations ISO/TC 211 expresses its appreciation to Standards Norway (SN) for hosting the meeting and providing the excellent meeting facilities at the Radisson Blu Hotel in Tromsø. ISO/TC 211 expresses its appreciation to the sponsors and co-organizers; the Norwegian Mapping Authority, the Ministry of Local Government and Modernisation and the Norwegian government s agency for railway services, for their support which made the arrangement possible. ISO/TC 211 expresses its appreciation to arrangement committee, Mr. Morten Borrebæk, Mr. Magnus Karge and Mr. Olaf Østensen, the Norwegian Mapping Authority, Mr. Trond Hovland, ITS Norway; Mr. Knut Jetlund, the Norwegian Public Roads Administration and Ms. Bjørnhild Sæterøy, Standards Norway, for their preparation of the meeting. ISO/TC 211 expresses its appreciation to Ms. Mette Wiken, Standards Norway, for her work with the preparation and her support to the delegates during the meeting. ISO/TC 211 expresses its appreciation to the sponsors for the delightful welcome reception at Polaria. ISO/TC 211 expresses its appreciation to host for arranging the meeting dinner at idyllic Sommarøy, and to Ms. Kari Strande, the Ministry of Local Government and Modernisation for her address to the delegates at the dinner. Acclamation 12
ISO/TC 211 Geographic information/geomatics Secretariat: SN (Norway)
2015-12-11 Number of pages: 9 ISO/TC 211 Geographic information/geomatics Secretariat: SN (Norway) Document type: Resolutions Title: Source: Resolutions from the 41st ISO/TC 211 plenary meeting in Sydney,
More informationD R A F T. ISO/TC 211 N 31xx. ISO/TC 211 Geographic information/geomatics Number of pages: 9
D R A F T ISO/TC 211 N 31xx 2011-05-27 Number of pages: 9 ISO/TC 211 Geographic information/geomatics Title: Source: Resolutions from the 32nd ISO/TC 211 plenary meeting in Delft, The Netherlands, 2011-05-26/27
More informationISO/TC 211 Geographic information/geomatics
2012-06-08 Number of pages: 7 ISO/TC 211 Geographic information/geomatics Title: Source: Resolutions from the 34th ISO/TC 211 plenary meeting in Toulouse, France, 2012-06-07/08 ISO/TC 211 plenary Expected
More informationISO/TC 211 Geographic information/geomatics
2012-12-12 Number of pages: 6 ISO/TC 211 Geographic information/geomatics Title: Source: Resolutions from the 35th ISO/TC 211 plenary meeting in Jeddah, Saudi Arabia, 2012-12-11/12 ISO/TC 211 plenary Expected
More informationISO/TC 211 N 4714 Resolutions from the 45th ISO/TC 211 plenary meeting in Wellington, New Zealand,
ISO/TC 211 N 4714 ISO/TC 211 Geographic information/geomatics Email of secretary: therese.andren@sis.se Secretariat: SIS (Sweden) Resolutions from the 45th ISO/TC 211 plenary meeting in Wellington, New
More informationISO/TC 211 Geographic information/geomatics
2009-11-06 Number of pages: 6 ISO/TC 211 Geographic information/geomatics Title: Source: Resolutions from the 29th ISO/TC 211 plenary meeting in Quebec City, Canada 2009-11-05/06 ISO/TC 211 plenary Expected
More informationISO/TC 211 GEOGRAPHIC INFORMATION AND GEOMATICS A FRAMEWORK AND REFERENCE MODEL
ISO/TC 211 GEOGRAPHIC INFORMATION AND GEOMATICS A FRAMEWORK AND REFERENCE MODEL Kian FADAIE Canada Centre for Remote Sensing Natural Resources Canada Fadaie@nrcan.gc.ca Paper number 1734 KEY WORDS: ISO/TC211,
More informationAGI and British Standards Committee (IST/36) Geographic Information Business Plan 2015
AGI and British Standards Committee (IST/36) Geographic Information Business Plan 2015 Peter Parslow, Chairman 1. Scope IST/36 is committee of British Standards Institution (BSI) with responsibility for
More informationISO/TC 215 N RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2. Date of document: Expected action: Background:
ISO/TC 215 N 2473 ISO/TC 215 Health informatics Email of secretary: Diana.warner@ahima.org Secretariat: ANSI (United States) RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2 Document type: Resolution Date
More informationContact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status:
Date 2007-11-26 Supersedes document Reference number ISO/TC 224 N 360 This document is still under study and subject to change. It should not be used for reference purposes. ISO/TC 224 Title: Service activities
More informationISO Coordinate Reference Systems Registry
ISO Coordinate Reference Systems Registry E. Brockmann (SWISSTOPO) M. Craymer (NRCAN) W. Dick (IERS-CB, BKG) B. Garayt IGN France) J. Ihde (BKG) J. Luthardt (CRS-EU, BKG) EUREF Symposium June 6-8, 2012
More informationCEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
More informationActivities of International Standards Organization (ISO) TC211 and TC172 with respect to Geodetic References
Activities of International Standards Organization (ISO) TC211 and TC172 with respect to Geodetic References Session 2.4 Standards and Traceability of a Terrestrial Reference Frame/GNSS Larry D. Hothem
More informationCEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
More informationResolutions from the Plenary Meeting of ISO/TC215 Health Informatics Kuopio Finland 27 May 2011
1 Resolutions from the Plenary Meeting of ISO/TC215 Health Informatics Kuopio Finland 27 May 2011 1. Resolved that ISO/TC215 accepts the report and resolutions of the Executive Council. 2. Resolved that
More informationStatus report to ISO/TC204 October 2012
[CEN/TC278/WG1 N1658] CEN/TC278/WG1 & ISO/TC204/WG5 Status report to ISO/TC204 October 2012 Jesper Engdahl Jesper Engdahl, WG Convenor Rapp Trans AG Hochstrasse 100 CH-4018 Basel, Switzerland Phone: +41
More information2. Regarding the Withdrawal of ISO/IEEE Projects from the TC 215 Program of Work
Proposed Resolutions from the 8 May 2012 meeting of ISO/TC 215/WG 7, Devices, in Vancouver for consideration at the plenary meeting of ISO/TC 215 on 9 May 2012 1. Regarding IEEE Projects in TC 215 ISO/TC
More informationEUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
More informationInternational Standards Health Informatics. Audrey Dickerson, RN, MS ISO/TC 215 Secretary
International Standards Health Informatics Audrey Dickerson, RN, MS ISO/TC 215 Secretary Objectives To appreciate the global role of standards in our lives To understand the role of international HIT standards
More informationCooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring
Cooperation between EGRC and ISO/TC 82, Mining A subject worth exploring ISO/CS presentation to the UNECE Expert Group on Resource Classification, Seventh Session, 27-29 April 2016 ISO basics What is the
More informationSTRATEGY PLAN ISO/TC 34/SC 17 Management systems for food safety
STRATEGY PLAN 2013-2017 ISO/TC 34/SC 17 Management systems for food safety STRATEGY PLAN 2013-2017 ISO/TC 34/SC 17 Management systems for food safety Content Background...5 Scope and work of ISO/TC 34/SC
More informationDRAFT MEETING MINUTES. Dated Reference ISO/TC 215/ WG7 N 0297 ISO/TC 215 PLENARY AND WG MEETINGS ISO/TC215 HEALTH INFORMATICS WG7 DEVICES
DRAFT MEETING MINUTES Dated 2010-05-19 Reference ISO/TC 215/ WG7 N 0297 ISO/TC 215 PLENARY AND WG MEETINGS ISO/TC215 HEALTH INFORMATICS WG7 DEVICES WG7 Secretariat: PATTY KRANTZ (ANSI) patty.krantz"at"medtronic.com
More informationISO/TC 207 COMMUNIQUÉ
COMMUNIQUÉ 9 th Annual Meeting of ISO/TC 207 on Environmental Management ISO/TC 207 held its 9 th Plenary meetings in Kuala Lumpur, Malaysia from July 2 to July 8, 2001. Member bodies from 56 countries
More informationCEN/TC 442. Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS 2017-12-08 ØIVIND ROOTH, CHAIR CEN/TC442 11.12.2017 2 What is BIM? BIM - Building Information Modelling Is an industry
More informationStandards Solution. What it is and how to use it. July 2017
Standards Solution What it is and how to use it July 2017 Who is IOGP? IOGP is the International Association of Oil & Gas Producers IOGP works on behalf of the world's oil & gas exploration and production
More informationBUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
More informationGI Standardization Overview
Second workshop on the use of GIS/OGC standards in meteorology GI Standardization Overview 1 nicolas.lesage@ign.fr 12 Janvier 2009 Modèle TN-02.018-1.1 The goal of standardization According to decree number
More informationIntroduction to ISO and ISO membership
Introduction to ISO and ISO membership 2 ISO Mission ISO develops high quality voluntary International Standards which facilitate international exchange of goods and services, support sustainable and equitable
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationYoshikazu Tanabe On behalf of Mr.Shigeo AIBA
ESF-International Spring Makers Conference Report of ISO/TC 227 April 6 th 2016 Yoshikazu Tanabe On behalf of Mr.Shigeo AIBA President of Toyoshima Co.,Ltd Chairman of Mirror committee (JSMA) 1 / 10 Contents
More informationIFLA KM Section Leaders Team: Roles and Responsibilities Purpose 1. Composition of Knowledge Management Section Leaders Team (KM Leaders)
IFLA KM Section Leaders Team: Roles and Responsibilities by Xuemao Wang, Chair of KM Section, with consultation from the KM Leadership Team 5/19/2011, revised 8/10/2011 Purpose To describe the composition
More informationISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique
More informationDoc. Number: N Report of CEN/TC 267 Secretariat "Industrial piping and pipelines" for the 30 th Plenary Meeting 27 October 2016 (Paris)
«Industrial piping and pipelines» CEN/TC 67 Date: 016-09-7 Assistant: Patricia DUFOUR Direct line: + (0)1 7 17 67 8 p.dufour@unm.fr Doc. Number: N 1069 Your contact: Patrick AMESLON Direct line: + (0)1
More informationbuildingsmart Summit, Opening plenary session
Document id Title Organisation /Author Date Status Plenary session agenda, Toronto Excom 2014-10-20 Draft 5 buildingsmart Summit, Opening plenary session Allstream Centre Room 206 CD Monday October 27
More informationCEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action
CEN/TC 151 N 800 CEN/TC 151 Construction equipment and building material machines - Safety E-mail of Secretary: rene.kampmeier_vdma.org@livelink.din.de Secretariat: DIN N 800 CEN TC 396 Activity report
More informationISO/TC 249 Newsletter
ISO/TC 249 Newsletter Vol. 6 (2014 Christmas Edition) Congratulations to the publications of the first two international standards of ISO/TC249 ISO 17218:2014 Sterile acupuncture needles for single use
More informationBUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices
Page: 1 BUSINESS PLAN CEN/TC 444 Test methods for environmental characterization of solid matrices EXECUTIVE SUMMARY Scope Standardization of test methods for the environmental characterization of soil,
More informationSTANDARDISATION OF SRF (ISO/TC 300)
STANDARDISATION OF SRF (ISO/TC 300) Mikko Talola Chairman of CEN/TC 343 & ISO/TC 300 Workshop Production and utilisation options for Solid Recovered Fuels EUBCE 2018 Copenhagen, Denmark May 17, 2018 SRF
More informationThe term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013.
ISO/TC 135 N 476 Non-destructive testing Our Date: 2013-10-15 Number of Pages:9 (Incl. this page.) To: Cc : ISO Central Secretariat P-members and O-members of ISO/TC 135 Chairmen and Secretaries of ISO/TC
More informationReport. CEN/TC 55 Dentistry
Date 2009-03-30 CEN/TC 55 N 562 Report of the Plenary meeting of CEN/TC 55 Dentistry held on 2009-03-03 in Bratislava Contents 1 Opening of the meeting...3 2 Roll call of delegates...3 3 Adoption of the
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationFor IEC use only. SMB Meeting 157, Frankfurt
For IEC use only SMB/5906/SBP 2016-05-27 INTERNATIONAL ELECTROTECHNICAL COMMISSION STANDARDIZATION MANAGEMENT BOARD SUBJECT SMB Meeting 157, Frankfurt Updated Strategic Business Plan of IEC TC 97, Electrical
More informationCEN/TC 207 N N Work programme May Document type: Other committee document. Date of document:
CEN/TC 207 N 1646 CEN/TC 207 Furniture Email of secretary: fabrizio.tacca@uni.com Secretariat: UNI (Italy) N 1646 - Work programme May 2016 Document type: Other committee document Date of document: 2016-05-05
More informationWG IV/ CEN/TC 251 WG IV. HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA
WG IV/ Saved: 13 October 2003 N03-08 Page 1 of 5 CEN/TC 251 WG IV HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA TITLE/ SUBJECT: SOURCE: WGIV and ISO TC215 WG2.1 (devices)
More informationISO safety standards. supporting progress in technology. Bangkok, Kolin Low
ISO safety standards supporting progress in technology Bangkok, 2017-07-10 Kolin Low ISO A global system ISO EXPERTS 247 active TCs 3 555 technical bodies 4 997 documents under development ISO MEMBERS
More informationISO/TC 30 Standards. Dr Michael Reader-Harris, NEL and Dr David Michael International Secretariats, BSI
Dr Michael Reader-Harris, NEL and Dr David Michael International Secretariats, BSI Slide 1 Benefits of standards Contributed to about 13 per cent of the growth in labour productivity in the UK over 1948-2002,
More informationAre there any new or emerging trends in technology that will impact the scope and work activities of the TC? Please describe briefly.
SMB/6498/R STRATEGIC BUSINESS PLAN (SBP) IEC/TC OR SC: SECRETARIAT: DATE: 109 DE 2018-06 Please ensure this form is annexed to the Report to the Standardization Management Board if it has been prepared
More informationSTANDARDS RELATED MEETING REPORT
STANDARDS RELATED MEETING REPORT REPORT No. : 2285 BY: JP Nhlapo (Standards Writer) and Dr JG Auret (TC31 Mirror Committee chairman): ATTENDANCE AT: IEC TC 31,Subcommittees and WG s CITY: Frankfurt COUNTRY:
More informationFIIRSM, GIOSH, RSP, OSHCR,
Report to Enprotex David Matthews FIIRSM, GIOSH, RSP, OSHCR, DipSM UK Lead and Convener of TC94 SC14 WG1 General Requirements and WG2 Structural Firefighting PPE ISO TC/94 SC/14: Constitution: 26 Countries
More informationFOLLOW UP SOURCE. Australian National Body / SA Report to TC46 Plenary 2015 Z41A. ISO TC 46 "Information and documentation"
ISO TC 46 "Information and documentation" Date: 2015-05-20 Z41A Doc. Number: N 2537 Assistant: Francisca Bien Aimé Direct line : + 33 (0 1 41 62 80 31 francisca.bienaime@afnor.org Your contact: Sabine
More informationStandardization of Remote Sensing Technology. Yuan-Yuan Jia. Academy of Opto-Electronics (AOE), CAS
WGCV-36 Shanghai, China May 13-17, 2013 Standardization of Remote Sensing Technology Yuan-Yuan Jia 1 Academy of Opto-Electronics (AOE), CAS 2 Secretariat of National Technical Committee 327 on RS of Standardization
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationCEN/TC 229 "Precast concrete products CEN/TC 229 N nd meeting of CEN/TC (Oslo) Draft agenda Revision 1
AFNOR-NORMALISATION Unit Construction and Water Cycle Department CEN/TC 229 Secretariat Your correspondent : Jean-Claude HESLING direct line : +33 (0)1 41 62 83 93 jeanclaude.hesling@afnor.org Secretary
More informationDecember Volume 19 Issue 02
Page - 1 PACIFIC ASIA LIFT AND ESCALATOR ASSOCIATION As we see 2017 coming to a close, and many of our friends and colleagues are planning Christmas, New Year festivities and holidays, we can reflect on
More informationISO/TC 249: past, present and future
ISO/TC 249: past, present and future Mr David Graham Chair of ISO/TC 249 6 December 2012 THE PAST History of ISO/TC 249 ISO/TC proposed by SAC at 45 th TMB, June 2009 Preliminary meeting August 2009, Beijing
More informationISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Tällberg, Sweden
ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Tällberg, Sweden By jouko.vaskimo@aalto.fi ISO/TC 258, the Technical Committee (TC) of the International
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationBUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
More informationCEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved
CEN/TC 256 Overview Presentation to ISCC January 2017 C Cork Chair CEN/TC 256 Overview of presentation CEN/TC 256 Organisation Developments in 2016 Key outputs Activities for 2017 2 CEN/TC 256 Committee
More informationBUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
More informationThe Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
More informationStandardisation activities in the field of HMI for road vehicles
International Telecommunication Union Standardisation activities in the field of HMI for road vehicles Dr. Christhard Gelau Bundesanstalt für Straßenwesen/Federal Highway Research Institute (BASt) Department
More informationBUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
More informationBUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
More informationISO Technical Committee 209 Status Report. Conor Murray Irish Representative, ISO TC 209 Committee Chairman Irish Cleanroom Society
ISO Technical Committee 209 Status Report Conor Murray Irish Representative, ISO TC 209 Committee Chairman Irish Cleanroom Society 1 ISO TC 209 Conor Murray Bio Conor Murray is a founder member and current
More informationBUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More informationInternational standards used locally worldwide ISO/TC 67
/ International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie
More informationCEN/TC 12. and ISO TC67 SC4 Plenary meeting in PAU (2004)
ISO/TC 67/SC 4 N 282 CEN/TC 12 and ISO TC67 SC4 Plenary meeting in PAU (2004) 12/13 May 2004 1 1 CEN TC12 AND ISO TC67 CEN TC12 is acting according to the goal of the Industry: GLOBAL STANDARDS USED LOCALLY
More informationISO Safety of machinery Laser processing machines Part 1: General safety requirements
INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions
More informationISO/CEN ACTIVITIES. EURL-Campylobacter workshop 2018 Hanna Skarin
ISO/CEN ACTIVITIES EURL-Campylobacter workshop 2018 Hanna Skarin RELEVANT GROUPS IN ISO AND CEN ISO/TC34/SC9: - ISO: International Standardisation Organisation - TC34: Technical Committee 34 on Food products
More informationQAiST WP2 and 6 A status report
QAiST WP2 and 6 A status report ESTIF STD&C meeting December 2 nd 2010 Peter Kovács* and Jan Erik Nielsen *) SP Technical Research Institute of Sweden peter.kovacs@sp.se +46 706524802 Summary of presentation
More informationBUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS CEN/TC 72 Business Plan Page: 1 EXECUTIVE SUMMARY Scope To prepare standards, harmonised where necessary, to meet the essential requirements
More informationBUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
More informationProgress in American and international. regarding woodworking machinery. LAS VEGAS, July 25th voluntary «TECHNICAL SIDE» of machinery safety
1.1 Safety laws AWFS 2015 The Stage Progress in American and international Woodworking Safety Standards Overview of what is going on around the world regarding safety Iuri Betti ISO/TC 39/SC4 chairman
More informationISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting
INTERNATIONAL STANDARD ISO 1806 Second edition 2002-12-01 Fishing nets Determination of mesh breaking force of netting Filets de pêche Détermination de la force de rupture de la maille de nappe de filet
More informationIEC TC 62: Overview & Work Program
IEC TC 62: Overview & Work Program Norbert Bischof, Secretary IEC TC 62, and SC 62C Presented bynicole Denjoy DITTA Vice-Chair COCIR Secretary General DITTA Workshop on International Standards Florianópolis,,
More informationISO/TS TECHNICAL SPECIFICATION
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 22391-7 First edition 2011-11-15 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance
More informationISO/IEC and CEN standardization activities + buildingsmart
ISO/IEC and CEN standardization activities + buildingsmart ICIS DA, Cologne, June 2018 Gunnar Friborg, Molio, June 20 th 2018 1 Agenda Organization and collaboration within BIM standardization and development
More informationISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 17892-6 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Reconnaissance et
More informationIntermediate report of the Secretariat on activities of CEN/TC 305 "Potentially explosive atmospheres Explosion prevention and protection"
2012-01-27 305 N 926 "Potentially explosive atmospheres Explosion prevention and protection" Intermediate report of the Secretariat on activities of 305 "Potentially explosive atmospheres Explosion prevention
More informationBUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the
More informationBSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
More informationCEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for
CEN European Committee for Standardization CENELEC European Committee for Electrotechnical Standardization CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities
More informationISO INTERNATIONAL STANDARD. Fire-resistance tests Elements of building construction Part 1: General requirements
INTERNATIONAL STANDARD ISO 834-1 First edition 1999-09-15 Fire-resistance tests Elements of building construction Part 1: General requirements Essai de résistance au feu Éléments de construction Partie
More informationImplementation Guidance for ISO 9001:2008
Document: ISO/TC 176/SC 2/N 836 Our ref Secretariat of ISO/TC 176/SC 2 Date: 15 October 2008 Implementation Guidance for ISO 9001:2008 CONTENTS 1.0 INTRODUCTION 2.0 BACKGROUND ON ISO 9001:2008 REVISION
More informationDIN NAMed Fachbereich G Medizinische Informatik Arbeitsausschuss 3 Terminologie. Angela Ollesch
DIN NAMed Fachbereich G Medizinische Informatik Arbeitsausschuss 3 Terminologie Angela Ollesch Organisationsschema NAMed im DIN Stand Juli 2004 FB G Medizinische Informatik Arbeitsausschuss G2 Interoperabilität
More informationNote 1: TC 61 does not deal with appliances which are already explicitly covered by the scope of other IEC Technical Committees.
SMB/6486/R STRATEGIC BUSINESS PLAN (SBP) IEC/TC OR SC: SECRETARIAT: DATE: IEC/TC 61 United States May 2018 A. STATE TITLE AND SCOPE OF TC TITLE: IEC TC 61, Safety of household and similar electrical appliances.
More informationACTION PLAN and RESOURCE REQUEST FORM for Professional Units
ACTION PLAN and RESOURCE REQUEST FORM for Professional Units 2016-2017 Name of Professional Unit: IFLA Cataloguing Section (CATS) Scope of Professional Unit: The Cataloguing Section analyses the functio
More informationBehind the scenes of ISO 22301
Behind the scenes of ISO 22301 Stefan Tangen Secretary of ISO/TC 223 Societal security So how does standardization work in practice? Example on cargo security SWEDEN 2001 Safe Swedish rules Stakeholders
More informationISO 14004:2004, Environmental Management Systems - General Guidelines On Principles, Systems And Support Techniques By ISO/TC 207/SC 1 READ ONLINE
ISO 14004:2004, Environmental Management Systems - General Guidelines On Principles, Systems And Support Techniques By ISO/TC 207/SC 1 READ ONLINE If you are searching for the ebook by ISO/TC 207/SC 1
More informationAbout European Standards
About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization
More informationAITS FUNDED REPORT OF INTERNATIONAL/EUROPEAN MEETING
AITS FUNDED REPORT OF INTERNATIONAL/EUROPEAN MEETING This report is to be submitted to the relevant BSI Programme Manager at the same time as the AITS form is returned (i.e. within 1 month of the date
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés
More informationISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies
INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en
More informationFinal Business Plan for a CEN Workshop on
1/6 Final for a CEN Workshop on Humanitarian Mine Action - Test and evaluation - Metal detectors - Part 2: Soil characterisation for metal detector and ground penetrating radar performance TABLE OF CONTENTS
More informationUNESCO - Man and the Biosphere (MAB) Programme Scientific Committee on Problems of the Environment (SCOPE)
30 March 2011 UNESCO - Man and the Biosphere (MAB) Programme Scientific Committee on Problems of the Environment (SCOPE) UNESCO-MAB SCOPE International Expert Group for the Urban Futures Programme Terms
More informationBUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY 1. BUSINESS ENVIRONMENT OF THE CEN/TC 132 It may be hard to believe but only 150 years ago aluminium was considered to be
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18750 May 2015 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - Cooperative systems - Definition
More information