Smart Metering Infrastructure (SMI)

Transcription

1 Smart ing Infrastructure () meter Components Context Diagram HAN Environment Expected to overlap Utility HAN HAN Environment Customer HAN Legend: HAN Home Area Network MDM Management System MSATS ing, Settlements and Transfer Solution IHD In Home Display W/H water heater A/C air conditioner PP pool pump metrology function Master HAN Device Slave HAN Device (IHD, W/H, A/C, PP, appliances, etc) secure tunnel customer service function other functions Internet Internet Gateway Internet SMART METER COMMUNICATIONS NETWORK METER DATA MANAGEMENT SYSTEM (RETAILER) Local Communications Port Customer HAN Environment needs to overlap the Utility HAN Environment (and include a gateway) if meter data is to be sourced. Third Party? RETAILER MANAGEMENT SYSTEM CUSTOMER INFORMATION SYSTEM (RETAILER) SMART METER MANAGEMENT SYSTEM or / recipient B2B Handler B2B Handler or / recipient B2B e-hub B2B e-hub B2B e-hub METER DATA MANAGEMENT SYSTEM () B2B e-hub or / recipient B2B Handler NEMNET or / recipient DISTRIBUTION MANAGEMENT SYSTEM METER DATA MANAGEMENT SYSTEM (DB) B2B Handler AEMO MDM MSATS CONNECTION POINT MANAGEMENT SYSTEM Settlements System CUSTOMER INFORMATION SYSTEM (DB) OUTAGE MANAGEMENT SYSTEM BILLING SYSTEM BILLING SYSTEM Slide 1

2 Swim Lane presentation General representation #2 Check Check confirmation Correct Verify Check SMMS = SMMS + SMCN + Slide 2

3 Swim Lane presentation BP01 de-energisation (includes general representation#2) (first check) (, ) De-energisation Second check Life Support Sensitive Load Special loads () Second check Life Support Sensitive Load Special loads () check failed Successful completion Check BP10 SMMS Slide 3

4 Swim Lane presentation Triggered by a physical wiring to connect a circuit to the meter BP02 - registration 3 rd Party Appliance connection Site visit to meter new circuit connected to meter SMMS Appliance connection details appliance new circuit Connect circuit to meter Slide 4

5 Swim Lane presentation (,, 3 RD Party) Load Control settings Feasibility check Network security BP02 operation (includes general representation#2) check failed Successful completion Check BP10 Slide 5

6 Swim Lane presentation BP02 de-registration 3 rd Party failed Successful completion Disconnect circuit (if required) Blank to nullify CLC/R Site visit to meter circuit disconnected from meter Notification + SMMS Appliance disconnection details Appliance removed Remove circuit from meter Slide 6

7 Swim Lane presentation BP04 Supply Capacity Control (includes general representation#2) (first check) (, ) SCC Second check Life Support Sensitive Load check failed Successful completion Check BP10 Notification + Slide 7

8 Swim Lane presentation BP05 routine and adhoc Event Log collection for metering data Used for metering data Collect d Processing ing data process failed QOS Event Log A&S Event Log HAN Event Log d prioritising queuing managed access Managed access SMMS Slide 8

9 Swim Lane presentation BP05 routine Event Log collection other than for metering data Collect Processing Event Logs QOS Event Log A&S Event Log HAN Event Log d failed prioritising queuing managed access Managed access SMMS Slide 9

10 Swim Lane presentation BP05 adhoc Event Log collection other than for metering data (, ) Event Logs Adhoc Event Log QOS Event Log A&S Event Log HAN Event Log d failed Collect Processing prioritising queuing managed access Managed access SMMS Slide 10

11 Swim Lane presentation (,, ) Alarm configuration BP05 Event Log alarm setup failed Successful completion Alarm configuration Slide 11

12 Swim Lane presentation BP05 Event Log alarm receipt Alarm detail Alarm detail review Alarm initiated Reverse polarity Neutral connection degradation Earth connection degradation Slide 12

13 Swim Lane presentation BP06 routine reading of metering data Collect d Processing Event Logs ing data ing Time synchronisation failed prioritising queuing managed access Managed access SMMS Slide 13

14 Swim Lane presentation (, ) Collect ing Time synchronisation BP06 special reading of metering data d failed Processing Event Logs ing data prioritising queuing managed access Managed access SMMS Slide 14

15 Swim Lane presentation (, ) BP07 reactive energy sampling setup failed Successful completion List of sites Sample period dates send Enable reactive energy data settings Notification + Slide 15

16 Swim Lane presentation BP07 routine reactive energy sampling Collect d Processing Event Logs Reactive energy data Reactive energy data failed prioritising queuing managed access Managed access SMMS Slide 16

17 Swim Lane presentation re-energisation BP08 re-energisation pre-setup (includes general representation#2) (, ) Monitor supply ARM BP08 re-energisation pre-setup should contain the same safety checks as the re-energisation process [JB comment, 20/05/11] check failed Successful completion Monitor supply ARM SMMS Slide 17

18 Swim Lane presentation BP08 re-energisation (includes general representation#2) (first check) (, ) re-energisation Second check de-energisation age () Second check de-energisation age () check failed Successful completion Check BP10 Re-energisation SMMS Slide 18

19 Swim Lane presentation MSATS/CATS process BP10 customer transfer (includes general representation#2) MSATS Transfer () Customer service settings BP01, BP02, BP08, BP22 Transfer completed failed Successful completion hold Slide 19

20 Swim Lane presentation BP11 NMI discovery /MSATS receive send Search findings Search findings are only returned to the party who ed the search Slide 20

21 Swim Lane presentation AEMO ing data process reports Initial reports Additional reports BP12 wholesale settlements Additional information AEMO Query send Weekly Settlements statements review Resolve ing data process Reconcile dispute pay Slide 21

22 Swim Lane presentation BP13 service charging Internal systems receive reconcile dispute pay Resolve Monthly invoice Prepare invoice send review Slide 22

23 Swim Lane presentation BP14 remote meter service checking (includes general representation#2) (, ) Remote meter service checking failed Successful completion if discrepancy found Slide 23

24 Swim Lane presentation AEMO BP16 network security event and notification Early event notification failed After the event notification Identify event Determine action notification Early event notification Early event notification Slide 24

25 Swim Lane presentation BP17 customer supply (safety) monitoring Notification Take action Notification review Condition detected Reverse polarity Neutral connection degradation Earth connection degradation Slide 25

26 Swim Lane presentation BP18 meter loss of supply detection Notification Take action Notification review After supply is restored Condition detected Loss of supply Slide 26

27 Swim Lane presentation BP19 standing data verification Check Check confirmation Correct Verify Check SMMS = SMMS + SMCN + Slide 27

28 Swim Lane presentation BP20 fault restoration Notification timeline Returned to service notification Initial notification investigate notification Rectify notification Initial notification Initial notification Notification timeline Test Fail Returned to service notification failed OK Slide 28

29 Swim Lane presentation (,, 3 RD Party) Load Control settings Feasibility check Network security BP21 priority override (includes general representation#2) check failed Successful completion Notification of by another party Check BP10 Slide 29

30 Swim Lane presentation (,, 3 RD Party) Load Control settings Feasibility check Network security BP22 network tariff configuration and application (includes general representation#2) check failed Successful completion Check BP10 Slide 30

31 Swim Lane presentation Software upgrade Initiate Initiate planning process BP23 software features enhancement planning process Obtain authorisation failed Successful completion Slide 31

32 Swim Lane presentation New connection standing data BP24 new connection (includes general representation#2) Successful completion New meter installed Initiate?? Assign NMI failed?? Or should it be the install commission install install Plug & Play Initial settings Plug & Play Slide 32

33 Swim Lane presentation Ministerial determination standing data BP25 meter exchange (rollout) (includes general representation#2) Plan rollout Create Program schedule Successful completion exchanged failed?? Or should it be the commission install install Plug & Play Initial settings Plug & Play Slide 33

34 Swim Lane presentation Change to meter standing data BP26 meter exchange (existing) (includes general representation#2) Assign Successful completion New meter installed failed?? Or should it be the Install commission install install Plug & Play Initial settings Plug & Play Slide 34