Sun Protection Systems. Technical catalogue. Blinds S80. Balance of light and shade. si_soltec_techcat09_zaluzija_s80.

Transcription

1 Sun Protection Systems Technical catalogue Blinds S80 Balance of light and shade. si_soltec_techcat09_zaluzija_s80.indd 1 11/17/09 10:49 PM

2 Blinds S80 - Motor drive Design description External Soltec Venetian blinds type S80 with motor drive. Trapezium slat 80mm is fixed into a textile ladder and a lifting ribbon enable rotation of slats around their axis as well as their lifting or lowering. Aluminium guides with a dimension of 18/24mm are rubber coated. Guides are mounted onto window frame with spacers. In case when blinds are not integrated in the facade 1,mm powder painted Alu mask is recommended for covering the package of folded blinds. : ID No.: SOL S SOL S : Cartridge: Guides: Assembling: Dimensions: Motor Mask Under-plaster mask Alu 18/24 mm Onto the window or facade. mask or under-plaster version. Maximal window shade width is 400 cm and height 00 cm. Control: Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer: group control by means of a main switch and/or individual switch; group control by means of a switch and/or individually over remote control; control in connection with sensors such as: wind/sun/ time/rain sensor; control in connection with a computer (»smart house«system). 2 Technical catalogue / Blinds / S80 si_soltec_techcat09_zaluzija_s80.indd 2 11/17/09 10:49 PM

3 Sun Protection Systems 8 R27 Mask height Blade package height 80 min R27 Blinds height 48 Mask height Blade package height Blinds height 80 min ID No. SOL S Motor Mask design ID No. SOL S Motor Under-face design TEchnical catalogue / Blinds / S80 si_soltec_techcat09_zaluzija_s80.indd 11/17/09 10:49 PM

4 Blinds S80 - Manual drive (windlass) Design description External Soltec Venetian blinds type S80 with a windlass manual drive. Trapezium slat 80mm is fixed into a textile ladder and a lifting ribbon enable rotation of slats around their axis as well as their lifting or lowering. Aluminium guides with a dimension of 18/24mm are rubber coated. Guides are mounted onto window frame with spacers. In case when blinds are not integrated in the facade 1,mm powder painted Alu mask is recommended for covering the package of folded blinds. : ID No.: SOL S80-00 SOL S : Cartridge: Guides: Assembling: Dimensions: Mask Under-plaster mask Alu 18/24 mm Onto the window or facade. Version with a mask or under-facade mounting. Maximal blinds width is 400 cm and height 00 cm. 4 Technical catalogue / Blinds / S80 si_soltec_techcat09_zaluzija_s80.indd 4 11/17/09 10:49 PM

5 Sun Protection Systems 8 R27 Mask height Blade package height 80 Blinds height min Height table (mm) Shade height Package height Mask height ID No. SOL S Design pod fasado TEchnical catalogue / Blinds / S80 si_soltec_techcat09_zaluzija_s80.indd 11/17/09 10:0 PM

6 Blinds S width 110 width min 2 mm min 2 mm ID No. SOL Ground plan ID No. SOL S Ground plan 6 Technical catalogue / Blinds / S80 si_soltec_techcat09_zaluzija_s80.indd 6 11/17/09 10:0 PM

7 Sun Protection Systems 80 Blinds height Mask height Blade package height min ID No. SOL S Mask design TEchnical catalogue / Blinds / S80 7 si_soltec_techcat09_zaluzija_s80.indd 7 11/17/09 10:0 PM

8 Balance of light and shade. Soltec - Sun Protection Systems, MIPO d.o.o., Obrtna ulica 9, 827 Dobova, Slovenia t +86 (0) , f +86 (0) , e info@soltec.si, si_soltec_techcat09_zaluzija_s80.indd 8 11/17/09 10:0 PM