Silent Gliss. Venetian Blind Systems

Transcription

1 Venetian Blind Systems

2 Application Chart Dimensions Features / Options Fitting Options Fitting Surfaces Operation Side Guide available Slat widths (mm) Twin Operation Mono operation Radio Control Perforated Slats (25mm only) Dual action wand Privacy (min light) Ceiling Fix Wall Fix Wood Concrete Suspended Ceiling System 28cm 2.5m 2.5m 4m² cm 2.5m 2.5m 5m² cm 3m 5m 7m² 25 50cm 3m 3m 4.5m² V 65cm 3m 3.4m 5 m²

3 Cord/Wand operated Venetian Blind System 8100 Cord/Wand operated Venetian Blind Product Information Venetian blind system for mm aluminium slats. Small headrail which allows the fitting in narrow window frames. Unique user-friendly control wand, combining tilt operation of slats with integrated cords for fast raising/lowering of the blind. Left or right hand operation with various wand lengths available. Available in 77 different slat colours. The system can be used up to a maximum width of 2.5 m. The maximum system drop and surface are 2.5 m and 4 m². The system 8100 can be equipped with side-guide wires and can therefore be used for sloped applications up to 15 inclination. The top stack of the slats can measure up to 12% of the blind drop (depending on slat widths and make-up). Please refer to the specific stack height charts. Beside fixation on window frame, this system can also be easily fitted with snap brackets on ceilings or walls. Delivered ready assembled

4 Profile Information Profile for mm Slats System Dimensions & Slat Stack Height 2.5 m 28 cm 2.5 m 4 m² Slat stack height calculation 50 (cm) Please note that the indicated stack heights may vary by up to 1 cm. System Options Side guides for stabilising blind system and sloped applications (up to 15 ) A B C A and B: Fitting of side guides inside window frame (A: detail eyelet / B: detail wireholder) C: Fitting of side guides onto front of window frame The system 8100 can be equipped with side-guide wires and can therefore also be used for sloped applications up to 15 inclination. 4

5 Fitting Information Bracket Positioning 5 cm cm cm 5 cm Side gaps when side-by-side fitting or recess fitting The light gap between two systems, when fitted side-by-side, has been minimized to only 5 mm. 5 mm mm Distance from wall when recess fitting is 2-3 mm. Fitting Options CAD download through Silent Gliss website Ceiling fitting with bracket 8103 ( mm) / Bracket ( mm) 8149 Bracket (44mm) Please note: Optional bracket 8149 for inside window frame fitting. 5

6 Recess fitting with bracket 8103 ( mm) Bracket ( mm) Wall or window frame fitting with bracket 8103 ( mm) Bracket ( mm) Wall fitting with brackets and bracket 8103 ( mm) (mm) / Brackets Bracket cover (60mm) Bracket ( mm) Wall fitting with adjustable bracket support 3271 / bracket plates and bracket 8103 ( mm) 8100 (mm) 3271/ / Bracket support Bracket plates 8103 Bracket ( mm) Wall fitting with bracket support 3271 and bracket 8103 ( mm) Bracket support Bracket ( mm) 6

7 Standard Accessories 8003 Profile (mm) 8006 Slat (mm) 8012 Bottom clip ( mm) 8101 Profile 8103 Bracket ( mm) 8105 End cover ( mm) 8111 Tilter holder ( mm) 8113 Tilter holder with pulley ( mm) 8115 Tilter ( mm) 8117 Holder cover ( mm) 8119 Profile 8121 Stop ring ( mm) 8123 Gear box left ( mm) 8124 Gear box right ( mm) 8145 Cord tassel inner Cord tassel inner Endcover ( mm) Pipe set (225 mm) Pipe set (385 mm) Pipe set (585 mm) Pipe set (785 mm) Pipe set (985 mm) Pipe set (1185 mm) Cord lock Snap ring Brake spring Cord tassel outer Cord tassel bush Slat clip ( mm) 101 Ladder cord ( mm) Lift cord ø 1.4 mm Pipe set (1385 mm) Pipe set (1585 mm) Pipe set (1800 mm) 7

8 Optional Accessories 3133 Bracket cover (60mm) 3134 Bracket (60mm) 3135 Bracket (80mm) 3271 Bracket support 3272 Bracket plate (69mm) 3273 Bracket plate (92mm) 8128 Spacer (4 ) 8129 Spacer (10 ) 8149 Bracket (44mm) 8235 Wire base short 8236 Wire base long 8237 Wire holder 8241 Eyelet 8249 Device Extension pipe (1800 mm) Pipe joint Threaded pin M3x Wire ø 0.9 mm for side guiding Useful Measures Profile (mm) Slat (mm) End cover ( mm) Ladder cord ( mm) Lift cord ø 1.4 mm ø Wire ø 0.9 mm for side guiding ø0.9 8

9 Cord/Wand operated Venetian Blind System 8110 Cord/Wand operated Venetian Blind Product Information Venetian blind system for mm or 25 mm aluminium slats. Unique user-friendly control wand, combining tilt operation of slats with integrated cords for fast raising/lowering of the blind. Left or right hand operation with various wand lengths available. Available in 77 different slat colours. Also perforated slats available for 25 mm slats. The system can be used up to a maximum width of 3 m (25 mm slats), respectively 2.5 m ( mm slats). The maximum system drop and surface with 25 mm are 5 m and 7 m², respectively 2.5 m and 5 m² when using mm slats. The system 8110 can be equipped with side-guide wires and can therefore be used for sloped applications up to 15 inclination. The top stack of the slats can measure up to 12% of the blind drop (depending on slat widths and make-up). Please refer to the specific stack height charts. Beside fixation on window frame, this system can also be easily fitted with snap brackets on ceilings or walls. Special optional privacy feature (PC) available for 25 mm slats, where the slats are punched with a special method to ensure no direct light penetration when slats are closed. Delivered ready assembled

10 Profile Information System Dimensions and Slat Stack Height 2.5 m ( mm slats) 3 m (25 mm slats) 28 cm ( and 25 mm slats) 2.5 m ( mm slats) 5 m (25 mm slats) 5 m² ( mm slats) 7 m² (25 mm slats) Slat stack height calculation (cm) (PC) (cm) 25 (PC) Please note that the indicated stack heights may vary by up to 1 cm. System Options Privacy feature (PC) available for 25 mm slats / Option The slats are punched with a special method to ensure no direct light penetration when slats are closed. The PC feature on 8110 is ideal for use in offices and helps compliance with EC computer shading regulations. 10

11 Side guides for stabilising blind system and sloped applications (up to 15 ) A B C A and B: Fitting of side guides inside window frame (A: detail eyelet / B: detail wireholder) C: Fitting of side guides onto front of window frame The system 8110 can be equipped with side-guide wires and can therefore also be used for sloped applications up to 15 inclination. Fitting Information Bracket Positioning 5 cm cm cm 5 cm Side gaps when side-by-side fitting or recess fitting 8110 The light gap between two systems, when fitted side-by-side has been minimized to only 5 mm. 5 mm 2 3 mm Distance from wall when recess fitting is 2-3 mm. 11

12 Fitting Options Ceiling fitting with bracket Bracket Recess fitting with bracket Bracket Wall or window frame fitting with bracket Bracket 8110 Wall fitting with brackets and bracket (mm) / Brackets Bracket cover (60mm) Bracket

13 Wall fitting with adjustable bracket support 3271 / bracket plates and bracket (mm) 3271/ / Bracket support Bracket plates Bracket Wall fitting with bracket support 3271 and bracket Bracket support Bracket Standard Accessories 8003 Profile (mm) 8004 Profile (24.3mm) 8006 Slat (mm) 8007 Slat (25mm) 8012 Bottom clip ( mm) 8013 Bottom clip (25 mm) 8120 Profile 8145 Cord tassel inner Cord tassel inner Endcover ( mm) 8239 End cover (24mm) Profile End cover (25 mm) Shaft stop Gear box Sleeve cover Gear spacer Gear box cover Tilter holder without pulley Tilter holder with pulley Tilter Brake spacer 13

14 10090 Pipe set (225 mm) Pipe set (385 mm) Pipe set (585 mm) Pipe set (785 mm) Pipe set (985 mm) Pipe set (1185 mm) Cord lock Snap ring Brake spring Cord tassel outer Cord tassel bush Bracket Click (25 mm) Slat clip (25 mm) Click ( mm) Slat clip ( mm) 101 Ladder cord ( mm) Ladder cord (25 mm) Lift cord ø 1.4 mm Pipe set (1385 mm) Pipe set (1585 mm) Pipe set (1800 mm) 8110 Optional Accessories 3133 Bracket cover (60mm) 3134 Bracket (60mm) 3135 Bracket (80mm) 3271 Bracket support 3272 Bracket plate (69mm) 3273 Bracket plate (92mm) 8235 Wire base short 8236 Wire base long 8237 Wire holder 8241 Eyelet 8249 Device Extension pipe (1800 mm) Pipe joint Threaded pin M3x3 14

15 10118 Ladder cord (25 mm) PC Wire ø 0.9 mm for side guiding Useful Measures Profile (mm) Profile (24.3mm) Slat (mm) Slat (25mm) End cover (25 mm) Ladder cord ( mm) Ladder cord (25 mm) Ladder cord (25 mm) PC Lift cord ø 1.4 mm ø Wire ø 0.9 mm for side guiding ø

16 8110

17 Motorised Venetian Blind System 8250 Motorised Venetian Blind Product Information Electrically operated venetian blind system for mm or 25 mm aluminium slats. Available in 77 different slat colours. Also perforated slats available for 25 mm slats. The system can be used with a minimum width of 65 cm, up to a height of 2 m. With a minimum width of 80 cm, the system can be used up to a height of 3.4 m. The maximum system width and surface are 3 m and 5 m². The system 8250 can be equipped with side-guide wires and can therefore be used for sloped applications up to 15 inclination. The top stack of the slats can measure up to 12% of the blind drop (depending on slat widths and make-up). Please refer to the specific stack height charts. The system can be easily fitted with snap brackets on ceilings or walls. Delivered ready assembled. Can be combined with Radio Remote Control System Silent Gliss

18 Profile Information System Dimensions & Slat stack height 3 m 65 cm (up to a height of 2 m) 80 cm (up to a height of 3.4 m) 3.4 m 5 m² Slat stack height calculation (cm) Please note that the indicated stack heights may vary by up to 1 cm. System Options Side guides for stabilising blind system and sloped applications (up to 15 ) A B C A and B: Fitting of side guides inside window frame (A: detail eyelet / B: detail wireholder) C: Fitting of side guides onto front of window frame The system 8250 can be equipped with side-guide wires and can therefore also be used for sloped applications up to 15 inclination. 18

19 Radio Remote Control System Silent Gliss 9940 Combined with the Radio Remote Control System Silent Gliss 9940, this system offers maximum comfort with minimum wiring. For further details, please refer to catalogue section Motors & Controls. Fitting Information Bracket Positioning 7 cm cm cm 7 cm Attention: Never position the brackets 8201 on the take up reels. Side gaps when side-by-side fitting or recess fitting The light gap between two systems, when fitted side-by-side has been minimized to only 5 mm mm 2 3 mm Distance from wall when recess fitting is 2-3 mm. 19

20 Fitting Options CAD download through Silent Gliss website Ceiling fitting with bracket Bracket (31.5mm) Recess fitting with bracket min Bracket (31.5mm) Wall or window frame fitting with bracket Bracket (31.5mm) Wall fitting with brackets and bracket 8201 (mm) Brackets Bracket cover (60mm) Bracket (31.5mm) 20

21 Wall fitting with adjustable bracket support 3271 / bracket plates and bracket / / Bracket support Bracket plates 8201 Bracket (31.5mm) Wall fitting with bracket support 3271 and bracket Bracket support Bracket (31.5mm) Standard Accessories 8003 Profile (mm) 8004 Profile (24.3mm) 8006 Slat (mm) 8007 Slat (25mm) 8010 Lift cord (ø 1.2 mm) 8012 Bottom clip ( mm) Bottom clip (25 mm) 8025 Shaft 5x5 mm 8038 Shaft adaptor long 8039 Stop ring 8041 Bearing 8042 Cone long 8043 Cone short 8044 Cover long 8045 Cover short 8046 Ring 8047 Head rail adaptor 8048 Shaft adaptor 8049 Endstop (AMS 25) 8060 Motor (LW25 B83 0.8Nm) 8102 Profile 8106 End cover (25 mm) 21

22 8201 Bracket (31.5mm) 8238 Endcover ( mm) 8239 End cover (24mm) Slat clip (25 mm) Slat clip ( mm) 101 Ladder cord ( mm) Ladder cord (25 mm) Power Supply 1.5 DC Optional Accessories 3133 Bracket cover (60mm) 3134 Bracket (60mm) 3135 Bracket (80mm) 3136 Bracket (100mm) 3137 Bracket (120mm) 3271 Bracket support 3272 Bracket plate (69mm) 3273 Bracket plate (92mm) 8235 Wire base short 8236 Wire base long 8237 Wire holder 8241 Eyelet Device 8262 Spacer (10 ) 8263 Spacer (4 ) 9052 Transformer power supply Wire ø 0.9 mm for side guiding Useful Measures Profile (mm) Profile (24.3mm) Slat (mm) Slat (25mm)

23 Lift cord (ø 1.2 mm) ø Ladder cord ( mm) Ladder cord (25 mm) Wire ø 0.9 mm for side guiding ø0.9 Motor & Controls The system 8250 is equipped with two different motor versions, depending on the size of the system. Motor Silent Gliss Torque: 0.4 Nm / 0.8 Nm Voltage: 24 V DC Current: 0.45 A / 0.65 A Speed: 40 rpm / 30 rpm Overload Protection CE Standard No end limit setting Weight: 195 g Operating Methods Combination of wall switch with single system V 24 V : Power Supply 1.5 DC Combination of wall switch with multiple systems 230 V 24 V : Power Supply 1.5 DC Transformer allows max. 2 systems connected, with optional Transformer 9052 max. 4 systems can be connected. Radio Remote Control System Silent Gliss 9940 System can be combined with Radio Remote Control System Silent Gliss For further details, please refer to catalogue section Motors & Controls. 23

24 Wiring and Connections Important: For other operating / wiring methods, please see section Motor & Controls, Silent Gliss 9940 or contact Silent Gliss

25 Chain Operated Venetian Blind System 8300 Chain Operated Venetian Blind Product Information Mono controlled, chain operated venetian blind system for mm or 25 mm aluminium slats. One single metal chain controls raising/lowering of slats and tilting. Left or right hand operation. Available in 77 different slat colours. Also perforated slats available for 25 mm slats. The situation of the control mechanism on the front of the headrail not only offers easy access and operation but also enables the side-by-side mounting of systems with a minimized light gap. The system can be used up to a minimum width of 50 cm and a maximum width of 3 m ( and 25 mm slats). The maximum system drop and surface are 3 m and 4.5 m². The system 8300 can be equipped with side-guide wires and can therefore be used for sloped applications up to 15 inclination. The top stack of the slats can measure up to 12% of the blind drop (depending on slat widths and make-up). Please refer to the specific stack height charts. The system can be easily fitted with snap brackets on ceilings or walls. Delivered ready assembled

26 Profile Information System Dimensions and Slat Stack Height 3 m 50 cm 3 m 4.5 m² Slat stack height calculation (cm) Please note that the indicated stack heights may vary by up to 1 cm System Options Side guides for stabilising blind system and sloped applications (up to 15 ) A B C A and B: Fitting of side guides inside window frame (A: detail eyelet / B: detail wireholder) C: Fitting of side guides onto front of window frame The system 8300 can be equipped with side-guide wires and can therefore also be used for sloped applications up to 15 inclination. 26

27 Fitting Information Bracket Positioning 7 cm cm cm 7 cm Side gaps when side-by-side fitting or recess fitting The light gap between two systems, when fitted side-by-side has been minimized to only 5 mm. 5 mm mm Distance from wall when recess fitting is 2-3 mm. Fitting Options Ceiling fitting with bracket Bracket 27

28 Recess fitting with bracket Bracket Wall or window frame fitting with bracket Bracket Wall fitting with brackets and bracket 8302 (mm) / Brackets 3133 Bracket cover (60mm) 8302 Bracket 8300 Wall fitting with adjustable bracket support 3271 / bracket plates and bracket 8302 (mm) 3271/ / Bracket support Bracket plates 8302 Bracket 28

29 Wall fitting with bracket support 3271 and bracket Bracket support Bracket 28.8 Standard Accessories 8003 Profile (mm) 8004 Profile (24.3mm) 8006 Slat (mm) 8007 Slat (25mm) 8010 Lift cord (ø 1.2 mm) 8012 Bottom clip ( mm) 8013 Bottom clip (25 mm) 8214 Profile 8215 Adapter hex 8222 Ring 8224 Pin 8238 Endcover ( mm) 8239 End cover (24mm) 8248 Bead chain (ø 4 mm) Profile 8302 Bracket 8305 Chain drive right 8306 Chain drive left 83 Spindle right 8317 Spindle left 8321 Support 8322 Device Slat clip (25 mm) Slat clip ( mm) 101 Ladder cord ( mm) Ladder cord (25 mm) 29

30 Optional Accessories 3133 Bracket cover (60mm) 3134 Bracket (60mm) 3135 Bracket (80mm) 3271 Bracket support 3272 Bracket plate (69mm) 3273 Bracket plate (92mm) 8235 Wire base short 8236 Wire base long 8237 Wire holder 8241 Eyelet 8249 Device 8262 Spacer (10 ) 8263 Spacer (4 ) Wire ø 0.9 mm for side guiding Useful Measures Profile (mm) Profile (24.3mm) Slat (mm) Slat (25mm) Lift cord (ø 1.2 mm) ø Ladder cord ( mm) Ladder cord (25 mm) Wire ø 0.9 mm for side guiding ø0.9 30

31

32 Unit 1B/107 Carnarvon Street Silverwater NSW 2128 Australia Tel: Fax: SGAUS_TB_VE_ /