PENOBSCOT BUILDING Hydrel ceramic metal halide fl oodlights highlight the progressive setbacks.

Transcription

1

2 PENOBSCOT BUILDING Hydrel ceramic metal halide fl oodlights highlight the progressive setbacks. COMPUWARE HEADQUARTERS Hydrel ceramic metal halide in-grade luminaires compliment compact fl uorescent wall-wash units to highlight the facade. Penobscot Building (left background) Compuware Headquarters (right foreground) Detroit Michigan Lighting Designer: Gary Steffy Lighting Design Inc. Photograph by: Gene Meadows

3 PARADOX ARCHITECTURAL IN-GRADE Paradox: A situation which appears contradictory but contains truths worth considering. For decades the lighting industry has turned to Hydrel s revolutionary fl ow-through product solutions when quality and performance matter most. For Hydrel, the paradox was meeting customer needs for minimal luminaire depth and aperture size, or situations where fl ow-through technology was not applicable. With this in mind, Hydrel set out to establish the standard for sealed in-grade illumination. The result: Paradox Architectural In-grade Luminaires. The Paradox Architectural In-grade is a compact, high-performance luminaire designed for up lighting architectural and landscape features, while providing the best modular sealed technology in the lighting industry today. Hydrel offers special insight into the complex demands of providing aesthetic, effi cient and durable lighting for in-grade applications. With a patent-pending junction box design and proprietary sealing technology, the Paradox is easy to install and highly durable. Proven Knife-Edge technology provides a watertight seal. The patent-pending door design maintains a wide source offering, allowing the light emitting area to exceed that of much larger luminaires. Hydrel s cool lens model is able to reduce heat by as much as 30%. These performance features combined with the fi xture s low profi le and simple styling make the Paradox series the fi rst choice for sealed in-grade lighting. Architecturally Styled Rugged Construction Superior Performance 1

4 DESIGN + PERFORMANCE FEATURES Architecturally styled 7" low profi le aperture. Minimal luminaire size and presence features an 8" housing depth. Utilizes 12W LED to 70W MH sources. Modular design simplifi es installation and maintenance. Innovative sealing technology provides IP68 Rating and meets UL wet location requirements. Precision optics designed to maximize lighting performance and minimize glare. Reduced lens surface temperature through the use of Hydrel's patent pending cool lens model....truth worth considering. 2

5 SPECIFICATIONS DOOR MATERIAL Die cast bronze or stainless steel. HOUSING Compression molded polyester with patent pending internal direct access junction box for throughbranch wiring. Internal junction box provides 44 in 3 volume for ease of wire connections and to ensure proper seal during installation. The housing is U.V. stabilized, impact and corrosion resistant for use in all types of environments. The housing utilizes a side-car confi guration and houses both the lamp and power module components as well as the lens/ door fi nishing section. LIGHT DISTRIBUTION Narrow spot through wide fl ood available. See ordering guide for complete list of distribution options. REFLECTORS (Non-refl ectorized lamps): High purity anodized specular or semi-specular materials in various distributions provide maximum performance and uniformity. Lamps can be aimed 15 from vertical and rotated 360. All confi gurations available with Hydrel s Aim-Lock indexed and locking components to allow re-lamping and maintenance without re-aiming. LENS / SEAL Tempered clear fl at borosilicate glass. The patent pending door / lens seal uses proprietary Knife-Edge technology to secure the assembly to the housing. Three captive screws hold the assembly in place. The lens is custom molded to provide maximum aperture opening and advanced thermal characteristics. CONDUIT ENTRIES Two molded ¾ NPT side entries standard, bottom hubs are molded with a ¾ NPT membrane knockout. POWER MODULE Integrally mounted modular power supply, prewired with quick connectors for easy installation and maintenance. Ballasts are rated for low starting temperatures. High power factor magnetic ballasts standard, electronic ballasts also available. FINISH Natural bronze or stainless steel with a brushed fi nish. Bronze doors may be painted. See ordering guide for color options. 3

6 HYDREL INNOVATION EASY AIMING Fixture aiming is a critical element to many projects and designers are concerned with the methods to accomplish it. Paradox Series lamps can be aimed 15 from vertical and rotated Loosen two tilt screws. The Paradox Series uses a mechanical aiming process. Aim-Lock indexed and locking components allow maintenance and relamping to be accomplished without re-aiming Tilt lamp. Tighten two tilt screws. Rotate optic assembly. 5 Tighten rotational lock screw DOOR / LENS ASSEMBLY Hydrel s patent pending door design utilizes proven Knife-Edge technology to ensure a watertight seal. Three captive door screws maintain aesthetic integrity and are designed to allow for positive sealing without the ability to damage the grommet through over-tightening. By incorporating a custom molded lens design, the Paradox Architectural In-grade provides maximum aperture opening while maintaining a minimal footprint. For added safety, Hydrel offers an optional anti-slip lens (pictured right). REDUCED LENS TEMPERATURES A major challenge in the design of in-grade fi xtures is the removal of heat to protect components and provide lower lens temperatures. When the potential exists for direct human contact with lenses, care is required to protect pedestrians from injury. The Paradox Architectural In-grade Cool Lens model (PDX7CL) utilizes a combination brass top ring, heat sink, and refl ective secondary IR lens fi lter to reduce heat by 30% when necessary. As with the use of all luminaires in pedestrian areas, Hydrel recommends that the proper care be taken in the selection of luminaire location, lamp wattage and distribution, in order to minimize pedestrian risk. Lens IR Lens Brass Top Ring 4

7 BEST FOR A REASON SOURCE The Paradox Architectural In-grade is a compact, high performance luminaire, and at 8 inches in depth the shallowest fi xture able to accommodate lamps to 70W HID. Developed with the industry s leading technology in mind, the Paradox Series is also available with LED sources. Incorporating the superior lumen maintenance and optimized energy performance of LEDs into Hydrel s revolutionary sealed in-grade once again sets the standard for design and performance in architectural in-grade lighting. Low Voltage to 75 Watts Incandescent to 70 Watts HID to 70 Watts Compact Fluorescent to 26 Watts LED to 12 Watts JUNCTION BOX Hydrel s patent pending junction box design offers 44 in 3 volume for simpler installation and utilizes proven Knife-Edge technology to ensure a watertight seal. A single fastener makes installation 50% faster and ensures even compression at the gasket, offering the highest protection against moisture intrusion for sealed in-grade technology. ACCESSORIES INTERNAL SOURCE SHIELDS / GLARE CONTROL The Paradox Architectural In-grade features internal glare control options for a number of distributions, providing clean, architecturally pleasing surfaces. These shields fasten internally, eliminating glare outside the desired distribution pattern. COLOR CONTROL Achieved through color fi lters or monochromatic LEDs, color is an important parameter for lighting designers. Hydrel has been at the forefront in providing color options for a wide range of projects and applications. DECORATIVE ROCK GUARD (pictured right) With Hydrel s decorative rock guard, safety no longer detracts from the aesthetic value of a lighting design. The patent pending rock guard is offered in cast bronze or stainless steel, is integrally cast as part of the door, and meets safety and luminaire preservation objectives as a singular die-cast component. 5

8 THE CATHEDRAL OF THE MOST BLESSED SACRAMENT Facade lighting on the cathedral was developed to accentuate the ornate character of the architecture, rather than fl atly fl ood walls. Hydrel in-grades are strategically located to highlight various elements. Each in-grade uses a 70-watt ceramic metal halide lamp for color qualities similar to that of incandescent, but with six to ten times the life and much better effi ciency. The Cathedral of the Most Blessed Sacrament Detroit Michigan Lighting Designer: Gary Steffy Lighting Design Inc. Photograph by: Gene Meadows

9 APPLICATION GUIDE WALLS & BUILDINGS FOR LIGHT COLORED, SMOOTH CONCRETE WALLS: Wall height Source/Distribution 12LED CLWHO LSD 35CMT4 WWD 70CMT4 WWD Spacing Set back COLUMNS FOR LIGHT COLORED, SMOOTH CONCRETE COLUMNS: Column height Source/Distribution 35CMT6 SP 35CMT6 SP 70CMT6 SP Set back ' SIGNS FOR SMALL TO MEDIUM GROUND MOUNTED SIGNS: Sign Dimension Source/Distribution P3035CM MFL 35CMT6 WFL 70CMT6 WFL Set back FLAGS FOR FLAG SIZES 5-10 IN WIDTH: Pole Height Two Fixtures Three Fixtures Four Fixtures 180º Apart 120º Apart 90º Apart 15' 35CMT6 SP 20CMT4 SP 12LED CLWHO SP 25' 70CMT6 SP 35CMT6 SP 20CMT4 SP 15' 2' 3' * 3' * 25' 3' 4' - 5' * 4' - 5' * Union Station Metropolitan Water District Courtyard Los Angeles, CA Photograph by: Gene Sasse * Up to 1/5 pole ht. from base evenly surround pole. LAMP SELECTION GUIDE Tree Size Small Structure Open Tight Lamp Benefit Source / Distribution LED Enhances Green CLWHO MFL CLWHO SP MH Enhances Green 35CMT6 MFL 35CMT6 SP QTZ Enhances White M50 FL M50 SP INCAN Enhances Red/Yellow P3070I FL P3070I NSP OPTICAL AIMING 10 Aiming Angle for Spot Applications y Height x Distance of object of setback 10 ft 2.0 ft 20 ft 3.5 ft 30 ft 5.2 ft 40 ft 7.0 ft 50 ft 9.0 ft x = Distance of setback of fixture for beam center to hit height desired. y = Height of object where beam center is desired. 7

10 PARADOX ARCHITECTURAL IN-GRADE EXAMPLE: * Indicates required selection. PDX7 B 35CMT6 120 SP FLC 34S RG LPI SF Model * PDX7 PDX7CL Material * SS Stainless Steel BSS 14 Brushed Stainless Steel B Bronze Lamp Type * Low Voltage 1 M20 MR11 GZ4 base M35 MR11 GZ4 base M50 MR16 GX5.3 base M75 MR16 GX5.3 base P3650 PAR36, screw terminal base P3675 PAR36, screw terminal base AR11135 G53 base AR11150 G53 base AR11175 G53 base Incandescent 2 P2050I PAR20, med. base P3050I PAR30, med. base P3070I PAR30, med. base HID 20MHCP 10,12 PGJ5 base 20MHCG 11,12 GU6.5 base 20CMT4 12,13 T4 G8.5 base 35CMT4 12,13 T4 G8.5 base 70CMT4 12,13 T4 G8.5 base 35CMT6 T6 G12 base 70CMT6 T6 G12 base P2035CM PAR20 medium base P3035CM PAR30 medium base P3070CM PAR30 medium base R11135CM GX8.5 R11170CM GX8.5 Fluorescent 18TRT 5,15 Triple Tube, GX24q2 base 26TRT 5,15 Triple Tube, GX24q3 base Voltage * MVOLT 6 Lens * FLC Flat lens clear FLCAS Flat lens clear, anti-slip Distribution * NSP Narrow Spot, specular reflector, SP Spot, specular reflector, MFL Medium Flood, Diffuse reflector, WFL Wide Flood, Diffuse reflector, WWD 7 Wall wash relector, Conduit Entries * 34S Two 3/4 NPT Side (Standard) Lamp * LPI Lamp Included Accessories Internal IHL Internal Honeycomb Louver ISS 8 Internal Source Shield WWL 9 Wall Wash Internal Louver LSF Linear Spread Filter CFAMB Color Filter Amber CFBLU Color Filter Blue CFGRN Color Filter Green CFRED Color Filter Red External RG Decorative Rock Guard Options Fusing SF Single Fuse DF Double Fuse Ballasting GEB 6 Electronic Ballast Notes: 1 Low voltage only available with 120, 240, 277 inputs. 2 Incandescent models are available with 120 Volt only. 3 Available for Low Voltage lamps only only available with 70CMT6 & P3070CM. 5 18TRT or 26TRT available with MVOLT only. 6 If GEB and a HID source is chosen, insert MVOLT. 7 Available with T4 G8.5 base, MH20 PGJ5 base, and MH20 G46.5 base. 8 Available with T6 and T4 lamps in NSP distribution only. Not valid with WWD. 9 Available only with WWD distributions and 18TRT, 26TRT lamps. 10 Philips Mini MasterColor available in 20W and 120V only. 11 GE Mini UltraMax available in 20W and 120V only. 12 Available with electronic ballast only CMT4, 35CMT4 or 70CMT4 only valid with MVOLT and GEB. 14 Not available with Decorative Rock Guard. 15 Available only in MFL light distribution. 8 Hydrel is an ISO 9001 Certified Manufacturer U.L. and C.U.L. Listed for wet locations. NEMKO CE N IP68 Rating

11 ORDERING GUIDE LED EXAMPLE: * Indicates required selection. PDX7 B 12LED CLW 120 SP FLC 34S IHL LPI Model * PDX7 Material * SS Stainless Steel BSS 14 Brushed Stainless Steel B Bronze Lamp Type * 12LED LED Color CLW Cool White CLWHO Cool White High Output WMW Warm White AMB Amber BLU Blue CYN Cyan GRN Green RED Red RBL Royal Blue Voltage * MVOLT Distribution * SP Spot, MFL Medium Flood, WFL Wide Flood, LSD Linear Spread Distribution Lens * FLC Flat lens clear FLCAS Flat lens clear, anti-slip Conduit Entries * 34S Two 3/4 NPT Side (Standard) Accessories Internal IHL Internal Honeycomb Louver External RG Decorative Rock Guard Lamp * LPI LED array Included DIMENSIONS STANDARD HOUSING COOL LENS OPTION 6 dia. 7 dia. 9 (229) 15 (381) 15 (381) 9 (229) 6 dia. 7 dia. 9 (229) 15 (381) 15 (381) 9 (229) 8 (203) 5 (127) 10 (254) 5 (127) For more information, contact the factory or visit the Hydrel website: 9

12 2007 Kevin Beswick Form No / Bradley Avenue, Sylmar, CA T F custserv@hydrel.com Acuity Brands, Inc. All rights reserved. Hydrel is a trademark of Acuity Brands, Inc.