YAH Product Features Johnson Controls YORK YAH ceiling mounted cabinet fan coil units are terminal points of central airconditioning systems. They are designed for fresh air units or to cool, heat, humidify and dehumidify, filter and clean the air, etc. The conditioned air can be delivered to locations across various distances via specially designed ducts. The units are especially suitable for the airconditioning of commercial buildings and industry applications. YORK YAH series air handling units have different models. The ranges from kw to kw, and air flow from 00 to 000. d external total pressure ranges from 0 to Pa. More external total pressure can be provided for flexible application. Each unit is made from galvanized steel with mm thick polyester fiber insulation. It contains a builtin coil and fan, and externally mounted nylon air filters. Cooling and heating coil use copper tubes with hydrophilic aluminium fins. The fan, motor and belt pulley are all highquality products producing stable and efficient performance. The fan is a forward curved centrifugal model that works on double air inlets. The motor features IP and a type F insulation with selflubricating bearings. The externally mounted filter can be withdrawn from side or bottom. Features Easy installation Lower unit height for low head floor ceiling application Low noise Filter can be maintained from side or bottom Efficiency Heat Exchanger quality copper tube and aluminium fin Better heat transfer efficiency Efficiency Motor Wellknown brand motors IE motor efficiency Low operating cost VSD motor optional Nomenclature & Feature YAH:YORK ceiling mounted air handling unit Nominal airflow: model code X 0 Fan drive type: BBeltdriver fan YAH 0 B S N 0 0 0 0 0 0 L A E Design serial number: E External total pressure code: AY; external total pressure; 0Special air flow Optimized Casing Structure Smooth surface, elegant profile Inner surface with aluminium foil surface, quality upgrade Ceilingmounted design with firm and stable frame Steel bolts, nuts, screws with special treatment, enhanced corrosion resistance Galvanized steel with mm thick polyester fiber insulation Performance Heat Insulation New polyester fiber insulation Good thermal insulation performance Noncombustible type, good fire resistance Casing Type: SSingke skin mm insulation Pipe connection: LLeft handling RRight handling Cooling coil: N H Heating coil: 0Without heating coil Row heating coil Rows heating coil Evaporative humidifier: 0Without humidifier 0mm humidifier 00mm humidifier 0mm humidifier Air condition: 0Return air condition XFresh air condition Power supply: 00V/N~/0Hz C0V/N~/0Hz DV/N~/Hz E0V/N~/Hz F0V/N~/Hz TiO: 0Without TiO; TTiO Filter: 0G(Nylon) filter AG(Aluminium mesh) filter BG Plate filter CG Plate filter DF Plate filter Quiet Operation quality material: fan and motor Double inlet, forward curved blade centrifugal fan Less vibration Low noise motor with belt drive Each fan has been dynamically and statically balanced
Specifications Main Technical Data YAHFB YAH0B 00 000 Nominal external total pressure (Pa) 00 00 0 0 Max. external total pressure (Pa) 0 0 Nominal Return air condition Fresh air condition........ Nominal heating Return air condition Fresh air condition........ Fan type Motor type Motor power 0. 0. Dimensions (mm) Width Height 0 Weight (kg). The weight listed in the table is the shipping weight.the operation weight of unit is about 0% more than the shipping weight.. return air conditions: air inlet at C DB/.WB; chilled water inlet/outlet at C/ C.. return air heating conditions:air inlet at C DB; hot water inlet/outlet at C/0 C.. Cooling conditions of fresh air unit: air inlet at C DB/ C WB; chilled water inlet/outlet at C/ C. YAHFB YAH0B YAH0B YAH0B YAH0B YAH0B YAH0B YAH0B YAHB 00 0 000 00 000 000 0000 000 0 0 0 0 0 00 0 0 00 0 0 0 0 0 0 0 0 0 0 0........... 0.......0.. 0..........0 0.. 0..0 0.0 0........ 0.....0... 0.0. 0...0.... 0. 0....... 0.0 0.. 0. efficient, double air inlets forward curved Ø asynchronous motor, F class insulation, IP 0. 0.......0.0 00 00 00 0 0 0 00 0 0 0 0 0 0 0. Heating conditions of fresh air unit: air inlet at C DB; hot water inlet/outlet at C/0 C.. External total pressure: the sum of velocity pressure and static pressure at the air discharge outlet (exclude the pressure drop across the unit). For fourpiped unit, heating coil is in the front of the coil in the direction of air flow.. If the unit has TiO, evaporative humidifier or split coil (+heating) option, the external total pressure should be deducted by the responding air drop pressure The unit performance is based on m altitude, the variance of altitude will affect the unit performance Altitude correction factors YAHB 000.........0 00 Altitude(m) 00 00 00 00 00 heat 0. 0. 0. 0. 0. Sensible heat 0. 0.0 0. 0. 0.0 Note: The above is only for reference. Please contact our local office for detailed data. YAHD Evaporative Humidifier Performance YAHFB YAH0B YAHFB YAH0B YAH0B 00 000 00 0 0mm Air pressure drop (Pa) Fresh air humidification (kg/h) Mixed air humidification (kg/h) Weight (kg) 00mm 0 0 mm 0mm 00mm 0 0mm 0 0 0mm 00mm 0 0mm 0 0mm 00mm 0mm 0 0 Electric Wiring Diagrams Electric Connection:. The direct start schematic diagram (Fig.) is for motor up to.kw. The Y start schematic (Fig.) for motors more than.kw.. The dashed lines is provided by customer and it should be connected according to Fig. or Fig.. Please ensure that all connections are tightened. YAH0B YAH0B YAH0B YAH0B YAH0B YAHB YAHB 000 00 000 000 0000 000 000. The evaporative humidification is an isenthalpic process, which is only suitable for comfort airconditioning, and not suitable for the applications where high precision of humidity control is required. 0 0. When the unit is equipped with a evaporative humidifier. The external static pressure of unit should be deducted by air pressure drop across the humidifier.. Fresh air humidification conditions: C DB; 0% RH. Face velocity less than.0m/s.. Mixed air (fresh air ratio at 00%) humidification condition: C DB; % RH. Face velocity less than.0m/s. 0. The above net weight includes the weight of evaporative humidifier, stainless steel frame and water distribution box; the operation weight of the evaporative humidifier is about 0% more than the unit.. The face velocity of direct feeding evaporative humidifier is the same as those of coils. 0 0 0 0 0. All electric connections should comply with local electric installation codes.. The ground terminal of the unit must be connected to the ground terminal in the control panel.. Customer should connect the power and control devices and supply shortcircuit and over heat protection. for placing an order:. The motor power is 0V/N0Hz, 0V/N/0Hz, V/N/Hz, 0V/N/Hz or 0V/N/Hz, wires.. The unit is equipped with plate type prefilters at the return air intake.. When placing an order, the pipe direction (left connection or right) should be noticed (note: facing the return air intake, it is the right if the inlet/outlet water pipes are on the right side of unit and vice versa).. The airflow rate and total pressure should be noticed when placing an order.. If starter is required, it should be noticed when placing an order (an option).
Specifications Main Technical Data Unit Drawings Width Height Supply air flange size Piping position A B C D E F G H J K L M N Return air flange size P Q Coil piping (Connection diameter) R Single Fan Units Double Fan Units YAHFB 00 0.... 0 0 Ø YAH0B 000.... 0 Ø YAHFB 00 00.... 0 0 Ø YAH0B 0 00.... 0 Ø YAH0B 0 0 0... 0. 0 Ø YAH0B 000.. Ø YAH0B 00 0. 0.. Ø YAH0B 000 0. 0.. 00 Ø YAH0B 000 00. 0.. 0 Ø YAH0B 0000 00 0. 0... 0 0 Ø YAHB 000 00 0.... 0 00 Ø YAHB 000 00. 0... 0 Ø. When G is, the unit has only one air supply duct connection.. The coil pipe connections use male threads (thread code R), the corresponding imperial diameters are: mm mm/ mm/ mm mm/ mm. The condensate pipe connections use mm O.D. male threads (thread code R).. All dimensions are SI unit (mm). The above applies to left hand unit.
Options Industry Leading Technology NanoTi0 Healthy Air Sterilizer (Optional) Johnson Controls is committed to providing comfortable and healthy living and working environment for all our customers. Whilst caring and safeguarding the natural environment outside. With indoor air quality becoming a crucial global health concern, our unique nanotio healthy air sterilization technology can help remove almost all airborne germs and pathogens, ensuring healthy and fresh indoor air supply. By oxidising and decomposing the harmful substances in the air, YORK NanoTiO healthy sterilization technology kills airborne germs, eliminates odors, and removes microbes and other harmful particles safely and efficiently. Biological pollutant e.g. bacteria and germs Organic pollutant volatile organic compounds (VOCs) e.g. formaldehyde, benzene Molds, fungi Inorganic gaseous pollutant e.g. NOx, Sox Smoke and offensive odours NanoTiO healthy air sterilization technology contains the following features: YORK is the first brand in the industry to apply Nanograde TiO technology to fan coils, residential and commercial central air conditioners, and residential split units. TiO Healthy Air Sterilizer YAHF YAH0 YAHF YAH0 YAH0 Nanograde TiO has been recognised in countries and is patentpending TiO photocatalysis not only filters bacteria but also kills them The ultraviolet light (UVA) in NanoTiO Healthy Air Sterilizer is designed to be durable, lasting up to 0,000 hours The technology has been tested by the following institutes and organisations: The Hong Kong Polytechnic University, Report No. P00 The Productivity Council of Hong Kong, Report No. 0 The Detection Centre of Microbiology, Guangzhou, PRC, Report No. 0 If the Nanograde TiO sterliser is ordered by customers, it will be installed on the YAH unit by the manufacturer prior to shipping. TiO YAHF TiO YAH0 TiO YAHF TiO YAH0 TiO YAH0 Connection frame No. Connection flange dimension 0 0 0 0 0 0 0 Lamp input power (W) x x x x x Cooling/Heating Capacity Table YAHF YAH0 YAHF YAH0 YAH0 YAH0 YAH0 YAH0 YAH0 YAH0 YAH YAH 00 000 00 0 000 00 000 000 0000 000 000 Rows......... 0.............0... return air conditions: air inlet at C DB/.WB; chilled water inlet/outlet at C/ C.. return air heating conditions:air inlet at CDB; hot water inlet/outlet at C/0 C.. Cooling conditions of fresh air unit: air inlet at C DB/ C WB; chilled water inlet/outlet at C/ C.. Heating conditions of fresh air unit: air inlet at C DB; hot water inlet/outlet at C/0 C. Return air condition Fresh air condition Return air condition Fresh air condition Sensible... 0...0....0 0... 0....0....... 0. 0. 0. 0. 0.0 0. 0..0.0.....0.....0..... Cooling Capacity. 0..... 0.0..0....................... 0..0. 0.... 0...0. 0.0. 0... Sensible.0 0. 0..... 0................ 0. 0....0.......0...0.0.....0....0 0........ 0...0. 0. 00........... heating..........0....... 0.0 0... 0... 0. 0.0 0. 0. 0. 0. 0. 0.0 0.....0..0......0..0. Heating Capacity...................... 0. 0. heating.......0........ 0.0 0. 0. 0... 0... 0. 0. 0.0 0. 0. 0..000..0.0..........0....0 0..... 0.. 0............. 0.... YAH0 TiO YAH0 x YAH0 TiO YAH0 x YAH0 TiO YAH0 00 x YAH0 TiO YAH0 0 x YAH0 TiO YAH0 0 x YAH TiO YAH 00 x YAH TiO YAH x. Power of ultraviolet lamp is 0V ~/0Hz or 0V ~/Hz. Do not stare at the ultraviolet lamp for long time to prevent eye injury.. The relevant wiring of interlock control between sterilizer and YAH unit should be supplied by customer, i.e. the sterilizer starts when the indoor fan is turned on; and the sterilizer stops when the indoor fan is turned off.
Row, Rows Coil Heating Capacity Table Rows heating Return air condition heating Fresh air condition YAHF 00.. 0. 0.0.0.0.. 0. 0.0.0.0 YAH0 000. 0. 0..0.0.. 0. 0.0..0 YAHF 00.. 0. 0. 0... 0. 0. 0. 0..0 YAH0.. 0. 0. 0.... 0. 0... YAH0 0.0. 0. 0. 0.... 0. 0.0.. YAH0 000.. 0.0 0. 0.... 0..00.. YAH0 00.. 0. 0..... 0.... YAH0 000.. 0. 0..... 0.... YAH0 000.. 0..0.... 0.... YAH0 0000.. 0.0..0.0 0...00..0.0 YAH 000.. 0...0.0.....0.0 YAH 000 0..0. 0.0 0.0....0.0. return air heating conditions:air inlet at CDB; hot water inlet/outlet at C/0 C.. Heating conditions of fresh air unit: air inlet at C DB; hot water inlet/outlet at C/0 C.. For fourpiped unit, heating coil is in the front of the coil in the direction of air flow. 0
Office Locations Australia (Sydney) Tel: + () 0 00 Fax: + () China (Shanghai) Tel: + () 0 Fax: + () Hong Kong Tel: + 0 00 Fax: + India (Mumbai) Tel: + () 000 Fax: + () 00 Indonesia (Jakarta) Tel: + () 00 Fax: + () 00 Japan (Tokyo) Tel: + () 0 Fax: + () Korea (Seoul) Tel: + Fax: + Macau Tel: + 0 Fax: + Malaysia (Kuala Lumpur) Tel: + () 00 Fax: + () 0 New Zealand (Auckland) Tel: + () Fax: + () 0 Singapore Tel: + 00 Fax: + 0 Thailand (Bangkok) Tel: + () 00 Fax: + () Manufacturing/assembly: Guangzhou, China; Selangor, Malaysia PUBL0(0)