Model SFMV Series Lead-Free Supply Fixtures Based On The MV17 Master Mixing Valves APPLICATION: The Acorn SFMV Series Supply Fixtures can be accurately referred to as a High/Low valve fixture, compliant with the temperature control requirements of at flow rates well below the ASSE standard tested flow rate. The SFMV Series Supply Fixtures are ideal for applications without recirculating pumps where the minimum flow for accurate control can be met by the actual demand of but a few fixtures. They are also ideal for recirculating systems where demand can vary from the pump draw alone (no user demand) up to a very high user usage. From small to large commercial applications, the SFMV series is offered in models/sizes and various inlet and outlet configurations in order to allow you to select the valve with the capacity and performance capable of delivering safely controlled tempered hot water to all your fixtures, at all times. FEATURES: l G Lead-Free sweated assembly featuring a DZR brass body mixing valve containing corrosion-resistant internal components. l Integral cartridge style checks with screens to prevent backflow and to filter debris from entering the valve. l Temperature adjustment is made using an Allen wrench. A locknut on the bonnet prevents unauthorized or accidental temperature adjustment. l Commercial quality paraffin actuator provides repeatable, reliable performance. l Includes lockable full port brass ball valves on inlet and outlet connections. l Temperature gauge on outlet, with gauges optionally available for inlets. l Valve is IAPMO certified per and CSA B12.3. l Factory assembled and pneumatically tested to 80 PSI (2 kpa). l Available with a Cold Water Supply Bypass configuration. l The MV17 is capable of exceeding the temperature control accuracy requirements of at Zero GPM actual user demand. The system must include a continuously operating recirculation pump capable of meeting the minimum flow rate shown on the nearby chart (. to 4 GPM based on the model) with a correctly adjusted balancing valve. * Under Normal Operating Conditions. G The wetted surface of these valves contacted by consumable water contains less than 0.2% of lead by weight in conformance with national lead free law. GUIDE SPECIFICATION: SFMV-1-B-OT-ITG SPECIFICATIONS: Patent Pending SFMV Series Supply Fixtures shall be factory assembled and feature an MV17 Series Mixing Valve which contains an advanced paraffin sensor with a temperature range of 0 F to 1 F (37.8 C to 71 C) and factory set at 120 F (38 C) with a locknut to prevent unauthorized temperature changes. Fixture shall also include copper piping, lockable ball valves and a temperature gauge standard on the valve outlet. Body material shall be lead-free brass with corrosion-resistant internal components. Fixture shall include an outlet temperature gauge. Supply Fixture shall be Acorn model SFMV- (1, 2, 3, 4 or ). Please visit or most current Page 1 of CSA B12.3 Valve Specifications: Maximum Operating Pressure:... 12 PSI (861 kpa) Maximum Hot Water Supply Temp:... 180 F (82 C) Outlet Temp. Range:... 0 F-1 F (38 C-71 C) Minimum Hot Water Supply*... F (3 C) Above Set Point Flow Rate at 4 PSI (3 kpa) differential: MV17-1:... GPM (6.8 LPM) MV17-2:... 4 GPM (170 LPM) MV17-3:... 90 GPM (341 LPM) MV17-4:... 0 GPM (68 LPM) MV17-:... 22 GPM (82 LPM) Certified Minimum Flow: MV17-1:... 0. GPM (1.9 LPM) MV17-2:... 1 GPM (3.8 LPM) MV17-3:... 2 GPM (7.6 LPM) MV17-4:... 3 GPM (11.4 LPM) MV17-:... 4 GPM (.1 LPM) NOTE: performance based on actual demand or recirculation pump flow rate or a combination of both. See FEATURES regarding control performance at ZERO GPM user demand. Federal Public Law 111-380 (No Lead) P.O. BOX 327 626-336-461
VALVE SELECTION: o SFMV-1 o SFMVCP-1 Rough Chrome Plated Brass Valve Body, 1/2 Inlets & Outlet, GPM (6.8 LPM) o o SFMVCP-2 Rough Chrome Plated Brass Valve Body, 3/4 Inlets & 1 Outlet 4 GPM (170 LPM) o Brass Valve Body, 1 Inlets & 1-1/4 Outlet 90 GPM (341 LPM) o SFMVCP-3 Rough Chrome Plated Brass Valve Body, 1 Inlets & 1-1/4 Outlet 90 GPM (341 LPM) o Brass Valve Body, 1-1/4 Inlets & 1-1/2 Outlet 0 GPM (68 LPM) o SFMVCP-4 Rough Chrome Plated Brass Valve Body, 1-1/4 Inlets & 1-1/2 Outlet 0 GPM (68 LPM) q SFMV- o SFMVCP- Brass Valve Body, 1/2 Inlets & Outlet, GPM (6.8 LPM) Brass Valve Body, 3/4 Inlets & 1 Outlet 4 GPM (170 LPM) Brass Valve Body, 1-1/2 Inlets & 2 Outlet 22 GPM (82 LPM) Rough Chrome Plated Brass Valve Body, 1-1/2 Inlets & 2 Outlet 22 GPM (82 LPM) PIPING : : o -T o -B Top Supply Inlet Bottom Supply Inlet : o -OT Outlet Top o -OB Outlet Bottom o -OSL Outlet Side, Left o -OSR Outlet Side, Right VALVE OPTIONS: o o -ITG o -TBV STYLE o -RC o -SMC Cold Water Bypass Inlet Temperature Gauges, Hot & Cold Thermostatic Balancing Valve (-B-OT Piping Configuration Only. Optional Cabinet Not Available) OPTIONAL CABINET: Recessed Cabinet Surface Mounted Cabinet FINISH o -PRC Prime Coat Finish (16 Gage Mild Steel) o -SSTL Stainless Steel (18 Gage Type 4) DOOR OPTIONS o -DRS Solid Door o -DRV Door Viewport Must Specify: Hinge Location (N/A, & SFMV-) o -L Left o -R Right # SFMV Series WARNING: Cancer and Reproductive Harm - www.p6warnings.ca.gov Page 2 of Acorn Controls warrants that its products are free from defects in material or workmanship under normal use and service for a period of one year from date of shipment. Acorn s liability under this warranty shall be discharged solely by replacement or repair of defective material, provided Acorn is notified in writing within one year from date of shipment, F.O.B. City of Industry, California. SELECTION SUMMARY & APPROVAL FOR MANUFACTURING Model Number & Options Quantity Company Contact Title Signature (Approval for Manufacturing) Date 800-488-8999 or 626-336-461
Model SFMV Series Lead-Free Thermostatic Mixing Supply Fixtures TECHNICAL DIMENSIONS: LESS OPTIONAL -ITG SFMV-T-OT SFMV-B-OB SFMV-1 1/ 1/ 7-3/4" (197) -1/ (394) 9-1/ (241) 13-7/8" (32) -/8" (270) 8-3/8" (213) 4-1/4" (8) -3/4" (273) 1 9-7/8" (21) 18" (47) -7/8" (403) " (24) 4-1/ (114) 1-1/4" 16-3/4" (42) 2 (84) -3/8" (264) 22-7/8" (81) 18-3/4" (476) -3/8" (390) (2) SFMV- 1-1/4" 1-1/ 1-1/ 1 23-1/4" (91) 2-1/ (648) 13-3/4" (349) 13-1/4" (337) 2 (97) 2 (6) 22-1/4" (6) 2 (84) 16-/8" (422) -/8" (422) (2) 6-/8" PRESSURE DROP PSID (KPA) CV (34) (69) (3) 20 (138) (207) 4 (3) (414) MV17-1 GPM (6.8 LPM) 2.2 (19) 7 (26.7) 8.7 (32.8) (37.9) 12.3 (46.4) (6.8) 17.3 (6.6) SFMV-B-OT MV17-2 4 GPM (170 LPM) MV17-3 90 GPM (341 LPM) 6.7 13.4 (6.8) 21.2 (80.3) 42.4 (1.6) 26 (98.4) 2 (227.1) 36.7 (139) 73. (278.2) 4 (170.3) 90 (340.7) 2 4 (393.4) SFMV-OB-OSL MV17-4 0 GPM (68 LPM) 22.4 0 (189) 70.7 (167.7) 86.6 (327.8) 0 (378.) 122. (463.6) 0 (67.8) 173.2 (6.7) MV17-22 GPM (82 LPM) 33. 7 (284) 6 (401.) 1 (491.7) 0 (67.8) 183.7 (69.4) 22 (81.7) 29.8 (983.) Please visit or most current Page 3 of CSA B12.3 P.O. BOX 327 626-336-461
Model SFMV Series Lead-Free Thermostatic Mixing Supply Fixtures TECHNICAL DIMENSIONS: LESS OPTIONAL -ITG SFMV-B-OB SFMV-T-OT PRESSURE DROP PSID (KPA) CV (34) (69) (3) 20 (138) (207) 4 (3) (414) MV17-1 GPM (6.8 LPM) 2.2 (19) 7 (26.7) 8.7 (32.8) (37.9) 12.3 (46.4) (6.8) 17.3 (6.6) MV17-2 4 GPM (170 LPM) MV17-3 90 GPM (341 LPM) 6.7 13.4 (6.8) 21.2 (80.3) 42.4 (1.6) 26 (98.4) 2 (227.1) 36.7 (139) 73. (278.2) 4 (170.3) 90 (340.7) 2 4 (393.4) & MV17-4 0 GPM (68 LPM) 22.4 0 (189) 70.7 (167.7) 86.6 (327.8) 0 (378.) 122. (463.6) 0 (67.8) 173.2 (6.7) SFMV-B-OSL MV17-22 GPM (82 LPM) 33. 7 (284) 6 (401.) 1 (491.7) 0 (67.8) 183.7 (69.4) 22 (81.7) 29.8 (983.) SFMV-B-OT SFMV-1 1/ 1/ 7-3/4" 7-3/4" -/8" 1 6-/8" 4-1/4" " 1-7/8" (197) (381) (197) (270) (343) (8) (381) (48) 8-1/ (216) N/A -3/4" 19" -3/4" -3/4" 18" 8-7/8" 4-1/ 18-1/ (273) (483) (273) (400) (47) (22) (114) (470) (44) 9-/8" (24) N/A 1-1/4" 16-3/4" (42) 2 (84) 12-3/4" (324) 18-3/4" (476) 21-7/8" (6) 12-3/4" (324) (2) 2-3/8" (721) 2-1/4" (7) 12-/8" (321) N/A 1-1/4" 1-1/ 2 (97) 18-1/4" (464) 19-1/4" (489) 2 (84) 1 (343) 6-1/4" (8) 26-1/ (673) 3-3/4" (9) 1 (3) N/A SFMV- 1-1/ 1 2-1/4" (641) 23-1/4" (91) 2 (6) -/8" (397) 7-1/4" (184) 29-/8" (72) 3-3/4" (9) 14" (36) -1/ (394) Please visit or most current Page 4 of CSA B12.3 P.O. BOX 327 626-336-461
Model SFMV Series Lead-Free Thermostatic Mixing Supply Fixtures TECHNICAL DIMENSIONS: WITH OPTIONAL -ITG SFMV-T-OT-ITG SFMV-B-OB-ITG SFMV-1 1/ 1/ 7-3/4" (197) " (381) 1 (3) 12-7/8" (327) -/8" (270) 7-7/8" (200) 4-1/4" (8) -3/4" (273) 1 -/8" (397) (432) -3/4" (400) 9-/8" (244) 4-7/8" (124) 1-1/4" 16-3/4" (42) 2 (84) 17-1/ (44) 19-7/8" (0) 18-3/4" (476) 12-/8" (321) -7/8" (149) SFMV- 1-1/4" 1-1/ 1-1/ 23-1/4" (91) 1 2-1/ (648) 17-7/8" (44) 19-1/4" (489) 23-1/4" (91) 2 (84) 22-1/4" (6) 2 (84) 1 (3) 1 (346) (2) 6-/8" MV17-1 GPM (6.8 LPM) PRESSURE DROP PSID (KPA) CV 2.2 (34) (19) (69) 7 (26.7) (3) 8.7 (32.8) 20 (138) (37.9) (207) 12.3 (46.4) 4 (3) (6.8) (414) 17.3 (6.6) MV17-2 4 GPM (170 LPM) 6.7 (6.8) 21.2 (80.3) 26 (98.4) 36.7 (139) 4 (170.3) 2 SFMV-B-OT-ITG MV17-3 90 GPM (341 LPM) MV17-4 0 GPM (68 LPM) 13.4 22.4 0 (189) 42.4 (1.6) 70.7 (167.7) 2 86.6 (327.8) (227.1) 0 (378.) 73. (278.2) 122. (463.6) 90 (340.7) 0 (67.8) 4 (393.4) 173.2 (6.7) SFMV-B-OSL-ITG MV17-22 GPM (82 LPM) 33. 7 (284) 6 (401.) 1 (491.7) 0 (67.8) 183.7 (69.4) 22 (81.7) 29.8 (983.) Please visit or most current Page of CSA B12.3 P.O. BOX 327 626-336-461
Model SFMV Series Lead-Free Thermostatic Mixing Supply Fixtures Plumbed For Cold Water Supply Bypass TECHNICAL DIMENSIONS: WITH OPTIONAL -ITG SFMV-B-OB-ITG SFMV-T-OT-ITG PRESSURE DROP PSID (KPA) CV (34) (69) (3) 20 (138) (207) 4 (3) (414) MV17-1 GPM (6.8 LPM) 2.2 (19) 7 (26.7) 8.7 (32.8) (37.9) 12.3 (46.4) (6.8) 17.3 (6.6) MV17-2 4 GPM (170 LPM) 6.7 (6.8) 21.2 (80.3) 26 (98.4) 36.7 (139) 4 (170.3) 2 MV17-3 90 GPM (341 LPM) 13.4 42.4 (1.6) 2 (227.1) 73. (278.2) 90 (340.7) 4 (393.4) SFMV-B-OSL-ITG MV17-4 0 GPM (68 LPM) MV17-22 GPM (82 LPM) 22.4 33. 0 (189) 7 (284) 70.7 (167.7) 6 (401.) 86.6 (327.8) 1 (491.7) 0 (378.) 0 (67.8) 122. (463.6) 183.7 (69.4) 0 (67.8) 22 (81.7) 173.2 (6.7) 29.8 (983.) SFMV-B-OT-ITG SFMV-1 1/ 1/ 7-3/4" (197) 1 (406) 1 (343) -/8" (270) 12-7/8" (327) 6-/8" 4-1/4" (8) 14-/8" (371) (44) 8" (203) -3/4" (273) 21-3/8" (43) 17-3/8" (441) -3/4" (400) (432) 8-7/8" (22) 4-7/8" (124) 18-1/ (470) (1) 9-/8" (244) 1-1/4" 16-3/4" (42) (6) 19" (483) 18-3/4" (476) 20" (08) 12-7/8" (327) -7/8" (149) 2-3/8" (64) 2-3/4" (70) -/8" (397) 1-1/4" 1-1/ 2-3/8" (64) 22-3/8" (68) 22-1/4" (6) 2 (84) 1 (343) (2) 26-/8" (676) (89) 13-1/4" (337) SFMV- 1-1/ 1 28-1/4" (718) 23-3/8" (94) 2 (84) 2 (84) -/8" (397) 6-/8" 29-/8" (72) 3-1/4" (83) 14" (36) Please visit or most current Page 6 of CSA B12.3 P.O. BOX 327 626-336-461
Model SFMV-TBV Series Lead-Free Thermostatic Mixing Supply Fixtures With Thermostatic Balancing Valve TECHNICAL DIMENSIONS: WITH OPTIONAL -TBV "L" "M" 1 1/ RETURN LINE 2 3 4 1 TEMPERATURE GAUGE 2 MIXING VALVE 3 TEMPERATURE/PRESSURE GAUGE 4 -TBV THERMOSTATIC BALANCING VALVE CHECK VALVE "L" "M" SFMV-1 1/ 1/ 7-3/4" (197) 2-3/4" (70) 6-1/ (16) (6) 2 (6) 6-/8" 1 (346) 8-7/8" (22) 3 (81) -1/4" (133) (1) -3/4" (273) 9" (229) (6) 9-1/4" (23) 2 (6) 8-3/8" (213) 11-/8" (29) 8" (203) 4 () -1/4" (133) 2-1/4" (7) 1-1/4" 16-1/4" (413) 2-7/8" (73) 8-1/ (216) -1/ (267) 36-/8" (9) 11-1/4" (286) 19" (483) -7/8" (276) 4-1/4" (1149) 8-1/ (216) 3-3/4" (9) 1-1/4" 1-1/ 3-1/4" (82) 9-1/ (241) 1 () 36-/8" (9) 1 () 18-3/8" (467) 1 (279) 48" (1219) 7-3/8" (187) 4" (2) SFMV- 1-1/ 1 4-1/8" () 9-3/4" (248) 13-3/8" (340) 36-/8" (9) 1 (343) (432) -1/4" (2) 49-3/8" (124) 8-1/4" (2) 4-1/4" (8) Please visit or most current Page 7 of CSA B12.3 P.O. BOX 327 626-336-461
Model SFMV-ITG-TBV Series Lead-Free Thermostatic Mixing Supply Fixtures With Inlet Temperature Gauges And Thermostatic Balancing Valve TECHNICAL DIMENSIONS: WITH OPTIONS -ITG-TBV "L" "M" 1 1/ RETURN LINE 2 3 4 1 1 TEMPERATURE GAUGE 2 MIXING VALVE 3 TEMPERATURE/PRESSURE GAUGE 4 -TBV THERMOSTATIC BALANCING VALVE CHECK VALVE "L" "M" SFMV-1 1/ 1/ 7-3/4" (197) 2-3/4" (70) 6-1/ (16) (6) 2 (6) 6-/8" 1 (343) (2) 3 (813) 6-1/4" (9) (1) -3/4" (273) (194) (6) 8-3/8" (213) 2 (6) 8-1/ (216) 12-/8" (321) " (24) 39" (991) 6-1/ (16) 2-1/4" (7) 1-1/4" 16-3/4" (42) 2-7/8" (73) 8-1/ (216) -1/4" (2) 36-/8" (9) 11-1/ (292) 19" (483) 9-/8" (24) 4" (1143) 8-1/4" (2) 3-3/4" (9) 1-1/4" 1-1/ 3-1/4" (82) 9-1/ (241) 12-1/8" (8) 36-/8" (9) 12-1/4" (311) 18-1/ (470) 9-/8" (24) 47-1/ (1207) 8-1/4" (2) 4" (2) SFMV- 1-1/ 1 4-1/8" () 9-3/4" (428) 14-3/8" (36) 36-/8" (9) 13-3/4" (349) (432) 9-1/ (241) 0-3/8" (1280) (219) 4-1/4" (8) Please visit or most current Page 8 of CSA B12.3 P.O. BOX 327 626-336-461
Model SFMV Series Cabinets Thermostatic Mixing Supply Fixture Cabinets TECHNICAL DIMENSIONS: WITH OPTIONAL -ITG TYP. CONTINUOUS PIANO HINGE LOCK CATCH INTEGRAL FLANGE FOR -RC RECESSED CABINET CYLINDER LOCK H M C CWB SEE VALVE CHART CABINET SHOWN LESS DOOR FOR CLARITY SFMV-1 1/ 1/ 3/4" 1-1/4" / " (380) -1/ (4) (4) / (3) -1/ 2 () (0) / 28-1/ (72) " (7) " (380) -1/ 2 (8) (4) (3) (0) " (7) 2-1/4" () 28-1/ (72) 36-1/ (9) " (380) -1/ 2 (8) (4) (3) (0) 3 (790) (0) 28-1/ (72) 3 (9) / 17-1/ (44) -1/ (4) (4) / 27-1/ (700) -3/4" (14) 24-1/ (620) (0) / 38-1/ (980) " (7) 18" (4) -1/ 2 () (4) (3) (0) " (7) 2-1/4" () 28-1/ (72) 36-1/ (9) (4) -1/ 2-1/ () (4) (3) (0) 3 (790) (0) 28-1/ (72) 3 (9) SFMV- 1-1/4" 1-1/ 1-1/ / -1/ (77) " (XXX) / 32-1/ (82) 3 (8) -1/ (77) 37" (940) 32-1/ (82) 4 (40) 31-1/ (800) 37" (940) 29-1/ (70) 4 (90) / 38-1/ (980) 29" (73) / 41-1/ () 3 (8) 28-1/ (72) 4 (40) 32-1/ (82) 4 (40) 32-1/ (82) 4 (6) 29-1/ (70) 4 (90) Please visit or most current Page 9 of CSA B12.3 P.O. BOX 327 626-336-461
Model SFMV Series Cabinets Thermostatic Mixing Supply Fixture Cabinets TECHNICAL DIMENSIONS: LESS OPTIONAL -ITG TYP. CONTINUOUS PIANO HINGE LOCK CATCH INTEGRAL FLANGE FOR -RC RECESSED CABINET CYLINDER LOCK H M C CWB SEE VALVE CHART CABINET SHOWN LESS DOOR FOR CLARITY SFMV-1 1/ 1/ 3/4" 1-1/4" / " (380) -1/ (4) (4) / (3) -1/ 2 () (0) / 28-1/ (72) " (7) " -1/ 18" (380) (4) (4) (3) -1/ (6) (0) 28-1/ (72) 29-1/ (70) 14" (3) -1/ 19" (480) (4) 18-1/ (470) -1/ 2 (6) (0) 28-1/ (72) 29" (73) / 17-1/ (44) -1/ (4) (4) / 27-1/ (700) -3/4" 24-1/ (62) (0) / 38-1/ (980) " (7) (4) -1/ 20-1/ (20) (4) 28" (7) -1/ 2 () (0) " (7) 8-1/4" (2) 3 (790) (4) -1/ 2 (8) (4) 21-1/ (4) -1/ 31 (790) (0) -1/ (77) 34" (86) SFMV- 1-1/4" 1-1/ 1-1/ / -1/ (77) " (XXX) / 32-1/ (82) 3 (8) -1/ (77) 3 (840) 32-1/ (82) 3" (890) -1/ (77) 37" (940) -1/ (77) 36-1/ (9) / 38-1/ (980) 29" (73) / 41-1/ () 3 (8) 3 (80) 37" (940) 36-1/ (9) 39" (990) 32-1/ (82) 4 (6) 3-1/ (900) 4 (90) Please visit or most current Page of CSA B12.3 P.O. BOX 327 626-336-461