Contents. References for your electric towel-dryer radiator 2. Warning 3

Contents References for your electric towel-dryer radiator 2 Warning 3 Installation 1/Prepare to install the electric towel-dryer radiator 4 2/Mark and drill the fixing points for the electric towel-dryer radiator and fan 5 3/Fix the electric towel-dryer radiator to the wall 6 4/ Fix the fan to the wall 7 5/ Fix the hook to the wall 8 6/Connect the electric towel-dryer radiator 9 7/Install the remote control on the wall 10 Procedure for recognizing the remote control 11 Setting the remote control 12 Operation The remote control 13 The various displays 13 Description of fan indicators 14 Use Starting up / Putting your electric towel-dryer radiator on stand-by 15 Choose your heating mode 16 Heat your room: using Comfort mode 16 Reduce room temperature: use of Eco mode 17 Programme your heating periods: use of Programming mode 18 to 20 Away more than 24 hours: use of Frost-free mode 21 Select functions 21 Run heating and drying once only: use of Shower cycle function 22 Activate Boost, towel drying or warming: use of Manual function 24 Programme Shower cycle: use of Programming function 27 Select language 31 Set day and time 32 Set parameters Select internal or external programming mode (Pilot wire) 33 Select Shower cycle settings 35 Calibrate ambient temperature 37 Select Comfort + temperature 38 Load-shedding 38 Lock commands 39 Restore factory settings 39 Using electric towel-dryer radiator without remote control 40 Advice Maintenance 41 In the event of a problem 42 to 44 1

Thank you for your choice and your confidence. The electric towel-dryer radiator that you have just purchased was subject to thorough testing and checking to ensure quality and your complete satisfaction. Keep the manual, even after installation of the electric towel-dryer radiator. The accessories box supplied with your electric towel-dryer radiator will contain: - the decorative trims (see usage stage 3 page 6) - the wall support for the fan (see usage stage 1 page 7) - the fan locking screws (see usage stage 5 page 8) - the cable feedthrough (see usage stage 6 page 8) - the wall hook (see usage page 8) - Wall hook screws (see usage page 8) - The remote control (see installation page 10) The references for your electric towel-dryer radiator These are located on the right hand side of the electric towel-dryer radiator. The product code and serial number are the manufacturer's identification from the electric towel-dryer radiator you have just purchased. A. Standards, quality labels B. Make of product C. Product code D. Manufacturer's reference E. Serial no. F. Manufacturer's no. Appliances bearing this symbol must not be disposed of in household waste, but must be collected separately and recycled. Collection and recycling of products at the end of their life must comply with local provisions and regulations. 2

Warning - Children must not climb the electric towel-dryer radiator. - Children must not lean on the electric towel-dryer radiator when it is operating, since in some circumstances, the surface can cause burns to the skin, especially as small children have not yet acquired the reflexes of an adult and are slower to react. If there is a risk of contact, install a protective grille in front of the electric towel-dryer radiator. - Children must be supervised to ensure they do not play with or near to the electric towel-dryer radiator. If there is a risk of contact, install a protective grille in front of the electric towel-dryer radiator. - Children under 3 years old should be kept away from this electric towel-dryer radiator, unless they are under constant supervision. - This electric towel-dryer radiator is not designed for use without supervision by children under 14 years of age, or by people of reduced physical, sensory or mental capacity, or those inexperienced or ignorant unless they have received prior instruction about the use of the appliance from someone responsible for their safety. - Children under 14 years of age must not play with the electric toweldryer radiator, or adjust it, clean it or maintain it. - The appliance must be connected to a 230 V, single-phase, 50 Hz mains supply. - This appliance must only be connected to a power supply by an authorized person, in accordance with the applicable regulations and standards. - This electric towel-dryer radiator is not designed for use by people (including children) of reduced physical, sensory or mental capacity, or those inexperienced or ignorant unless they have received prior instruction or supervision from someone responsible for their safety, about the use of the electric towel-dryer radiator. - Any intervention on electrical parts may only be made by a qualified professional. - Make sure that no objects or paper are inserted into the electric towel-dryer radiator. - The first time the radiator heats up, a slight smell may be perceptible. This is the result of any remaining traces from the manufacturing process of the electric toweldryer radiator. - To avoid any danger posed to very young children, this electric towel-dryer radiator should be installed so that the lowest heated bar is at least 600 mm above the floor. - For safety reasons, the re-filling of the electric towel-dryer radiator is strictly forbidden. If necessary, contact the manufacturer's after-sales department, or a qualified professional. 3

Installation 1/Prepare to install the electric towel-dryer radiator Installation rules - This electric towel-dryer radiator was designed to be installed in residential property. For other situations, please consult your distributor. - The installation must comply with professional standards and the safety standards in force in the country of installation. (NFC 15100 in France). - The electric towel-dryer radiator shall have a 230 V single-phase 50 Hz power supply. - In damp environments such as bathrooms and kitchens, you must install the junction box at least 25 cm from the floor. Keep the electric towel-dryer radiator out of any draught that could affect its operation. (e.g.: beneath a centralized mechanical fan, etc.). Do not install it underneath a fixed power outlet. Volume 1: Volume 2 Volume 3 No electrical appliance. IPX4 electrical appliance (Standard EN 60335-2-43: 2003/A2: 2008) Comply with the minimum recommended distances from furnishings when positioning the appliance. 4

2/Mark and drill the fixing points for the electric towel-dryer radiator and fan Using the packaging cover, position your electric towel-dryer radiator on the wall with the help of the appliance centreline. Unfold the flap to place it properly on the floor (use a level if necessary). Mark the 4 drilling points shown on the surface of the cover for fixing the toweldryer radiator, and the 4 drilling points for fixing the fan. Mark these points with a pencil, piercing through the card. Fixing left pivot Appliance mid-line Fixing right pivot Take the cover away. Use bolts suitable for your type of partition wall (e.g., for plasterboard, use M5 metal expansion bolts for the radiator, and M4 bolts for the fan). Pre-screw the 4 fixing screws for the electric towel-dryer radiator (leave the screws protruding by 8 mm max). Fixing points for electric towel-dryer radiator (left or right) Fixing points for fan 5

3/Fix the electric towel-dryer radiator to the wall Remove the electric towel-dryer radiator from the box. Stand it on the floor. Remove the 6 wedges from the ends (the electric towel-dryer radiator rests on the fan wedges). Open out the hinges to 90. Lift the electric toweldryer radiator up to slide the hinges on to the screws. Screw up the screws slightly. Check that the towel-dryer radiator is vertical. (using a level). Tighten the 4 screws. Screw Fit the decorative trims: push them against the wall and slide them on as far as they will go. Screw 6

4/ Fix the fan to the wall Screw on the wall support for the fan (we recommend you screw in the 4 screws in the order shown opposite). Detach the fan from its frame and set it down on the ground. Remove the wedges. Cut away the two finishing caps. screw finishing cap Bring the fan up to attach it to the lower hooks. Swing it into position. lower hooks Clip in place. 7

Screw up the two lock-screws provided on top of the fan. Put the finishing caps in place (cut away previously at stage 2). Glue the cable feedthrough provided under the hinge at the bottom of the electric towel-dryer radiator. Slide the connecting cable through the feedthrough. 5/ Fix the hook to the wall Fix the hook as shown in the diagram. 8

6/Connect the electric towel-dryer radiator Connection rules The electric towel-dryer radiator shall have a 230 V single-phase 50 Hz power supply. The electric towel-dryer radiator power supply must be connected directly to the mains, after the circuit-breaker and without an intermediary switch. The mains connection will use the electric towel-dryer radiator cable, through a junction box. In a damp environment such as bathrooms and kitchens, you must install the junction box at least 25 cm from the floor. A ground connection is not permitted. Do not connect the pilot wire (black wire) to ground. The installation must have an omnipolar circuit-breaker, with a contact opening distance of at least 3 mm. If the power cable is damaged, the manufacturer, the after-sales service or a similarly qualified person must replace it, for safety's sake. If you are using the pilot wire via a programming unit, the latter must have a 30 ma differential protection device (e.g.: bathroom). This differential protection must be the same one that protects the electric towel-dryer radiator. Connection diagram for electric towel-dryer radiator Turn off power and connect the wires as shown in the following diagram: Live = brown neutral = blue pilot wire = black appliance cable Live neutral main supply 1 st case : appliance only 2 nd case: slave appliance appliance not controlled. pilot wire not connected. to appliance with unit or programmer You can connect the pilot wire if your home has a programming unit, programmer or controller. In this case, check that the programming commands are being correctly transmitted with the following procedures, according to the selected mode (Comfort, Eco, etc.): Signal to be transmitted COMFORT FROST- FREE STOP LOAD- SHEDDING COMFORT COMFORT Measurement between pilot wire and neutral 0 Volts 230 volts -115 Volts negative + 115 Volts positive 230 Volts for 3 sec 230 Volts for 7 sec 9

7/Install the remote control on the wall For the best possible use of your remote control, we recommend you install it beside the electric towel-dryer radiator (the temperature probe inside activates or turns off the fan as required), at a height of 1.5m, so that the screen can be read easily. Position the remote control holder on the wall. Mark the two drilling holes (make sure they are horizontally aligned). Remove the remote control holder and drill the 2 holes. Mark the 2 drilling holes Pre-screw the 2 screws supplied, before installing the holder. Then place the remote control holder opposite the 2 oblongs. Swing the holder anti-clockwise (make sure the holder is level). Tighten the screws. Put the cover in place. Your installation is complete. To remove the cover, insert a screwdriver into the slot and unclip the cover. 10

Procedure for recognizing the remote control DESCRIPTION DESCRIPTION After installation of the electric towel-dryer radiator and the remote control on the wall, you can turn the power on again to commission the remote control. Open the battery compartment on the back of the remote control to replace the battery. You must insert the battery (CR2430) into the remote control within 10 minutes of powering up the electric towel-dryer radiator. NB: If more than 10 minutes have passed, turn the power off at the circuit-breaker and start it up again. Proceed as follows, staying beside your towel-dryer. The pairing process begins when the battery is inserted. pairing Wait a few moments while the recognition process takes place (there is nothing for you to do). Do not insert the battery before powering up the electric towel-dryer radiator. Pairing is complete. You can move on to setting the language. If the remote control pairing procedure has not succeeded, go to page 43. 11

Setting the remote control When the remote control recognition procedure is finished, set the date and time on the remote control. Choose the language (Fr for French, En for English, etc.). French Language changed Select language with + or - Confirm your choice by pressing You have selected the language. Choose the day. Select day with + or -. Confirm your choice by pressing Choose the time. Select hour with + or -. Confirm your choice by pressing Select minutes with + or -. Confirm your choice by pressing The setting procedure is finished. The remote control returns to the main display. 12

Operation The remote control For increased savings and ease of use, your electric towel-dryer radiator has a remote control with digital display. It allows you to set all the functionalities of your electric toweldryer radiator. A. Setting temperature, day and time B. Start-up / Validation / Stand-by C. Setting temperature, day and time D. Back E. Shower cycle F. Menu G. Navigation key < or > The various displays Display of day, time and setting in progress Display of day, time and setting in progress Display of programme Display of temperature, day and time if setting in progress Action impossible Remote control reception status Battery status Calibration Modes Set up Programming Locking Pilot wire Timer 13

On the remote control, you can see if your electric towel-dryer radiator is warming the bathroom, warming the towels or drying the towels: Your electric towel-dryer radiator is warming the towels Your electric towel-dryer radiator is drying the towels Your electric towel-dryer radiator is warming the bathroom. Description of fan indicators The indicator shows red if the electric towel-dryer radiator is heating. This indicator is green when the electric towel-dryer radiator is on but not heating. It is off if the electric towel-dryer is stopped (but still powered up). The indicator shows orange when the filter needs cleaning (see page 41). 14

Use STARTING UP YOUR ELECTRIC TOWEL-DRYER RADIATOR STARTING UP YOUR ELECTRIC TOWEL-DRYER RADIATOR Start your appliance by pressing briefly on the power button, on the left-hand side of the fan. The remote control displays the comfort temperature. The first time it starts up, the appliance is set in Comfort mode at 21 C. ACTIVATE SCREEN Press one of the keys on the remote control to activate its screen. The screen of the remote control turns on. PUT YOUR ELECTRIC TOWEL-DRYER RADIATOR ON STAND-BY Press and hold the power button to put your appliance on stand-by. Your electric towel-dryer radiator is no longer heating. Press the power button briefly to turn on the remote control. 15

CHOOSE YOUR HEATING MODE Your electric towel-dryer radiator offers you several heating modes: The Comfort Mode * that lets you set a pleasant ambient temperature. The Eco Mode that lets you lower the room temperature during the night or if you are away from the house for a long period. Programming Mode PROG lets you select your heating periods for Comfort or Eco mode. Frost-free Mode lets you maintain a temperature of 7 C (± 3 C) if you are away for more than 24 hours. HEAT YOUR ROOM: USING COMFORT MODE DESCRIPTION This mode lets you set a pleasant ambient temperature in the room. HOW TO ACTIVATE THIS MODE Before any action, press one of the keys to turn the screen on. To activate Comfort mode, press < or > until the arrow is on the mode The electric towel-dryer radiator will maintain a Comfort temperature of 21 C. The recommended Comfort temperature is 21 C. The Comfort mode range is from 12.5 C to 30 C. HOW TO ALTER THE TEMPERATURE Change the temperature displayed by pressing + or -. The electric towel-dryer radiator heats to the specified temperature. Wait at least 6 hours for the temperature to stabilise. Change the temperature again if it does not suit you. 16

REDUCE ROOM TEMPERATURE: USE OF ECO MODE DESCRIPTION This mode lets you lower the room temperature during the night or if you are away from the house for between 2 and 24 hours. HOW TO ACTIVATE THIS MODE Before any action, press one of the keys to turn the screen on. To activate Eco mode, press < or > until the arrow is on the ECO mode. The temperature will be reduced to 3.5 C below the selected Comfort temperature HOW TO ALTER THE TEMPERATURE Change the temperature displayed by pressing + or -. The electric towel-dryer radiator heats to the specified temperature. 17

PROGRAMME YOUR HEATING PERIODS: USE OF PROGRAMMING MODE PROG DESCRIPTION This mode allows you to programme your Comfort temperature periods (when you are at home) and Eco temperature periods (at night or when you are away). Before adjusting the programming, check that the remote control is already set to the correct date and time. (see page 32). The remote control contains a default setting. This is displayed as follows: - The black blocks show that you are in Comfort mode. - 'No blocks' shows that you are in Eco mode. This preset programme has: From Monday to Sunday, Comfort periods from 6 am to 10 am and from 6 pm to 10 pm. HOW TO DISPLAY THE PRESET PROGRAMME Before any action, press one of the keys to turn the screen on. To access the Eco/Comfort programming menu, press Press on < or > to display Prog Eco/Comfort. Confirm your choice by pressing You will then see the Select Day menu. Press < or > to see the next day. Repeat to see the factory-set programme (Comfort mode and Eco mode) for each day of the week. When you have finished, quit the menu by pressing the back key to return to the Eco/Comfort Programming menu. To return to the main screen, press the back key. 18

HOW TO MODIFY THE PRESET PROGRAMME If the pre-set programme does not suit your own lifestyle, you can change it, and set your own Comfort and Eco temperature periods. Before any action, press one of the keys to turn the screen on. Go to the Prog Eco/Comfort menu (see previous page for how to access it). Confirm by pressing Press < or > to select the day for your programme. You can now modify the preset programme. ( programming in Comfort mode, programming in Eco mode) Confirm by pressing Press < or > to select the day for your programme. Eco => Comfort: If you want to change to Comfort mode for a time period that is programmed in Eco mode, press the + key. Comfort => Eco: If you want to change to Eco mode for a time period that is programmed in Comfort mode, press the - key. You have changed Monday's programme, confirm your choice by pressing You can copy this programme for other days in the week. Do you want to copy the programming for other days in the week? You want to copy this programme for days in the week that have the same routine. To change the day, press < or >. 19

You don't want to copy the programming for other days in the week If you do not want to copy the programme, press < or > until the display shows NO. The remote control returns to the main display. HOW TO ACTIVATE PROGRAMMING Before any action, press one of the keys to turn the screen on. To activate Programming mode, press < or > until the arrow is on the mode PROG. The remote control returns to the main display. The remote control displays programming in Comfort PROG * or Eco PROG ECO mode. 20

AWAY MORE THAN 24 HOURS: USE OF FROST-FREE MODE DESCRIPTION This mode lets you maintain a temperature of 7 C (± 3 C) if you are away for more than 24 hours. This temperature cannot be modified. HOW TO ACTIVATE THIS MODE Before any action, press one of the keys to turn the screen on. To activate Frost-free mode, press < or > until the arrow is on the Frost-free mode. The electric towel-dryer radiator will maintain a temperature of 7 C. SELECT FUNCTIONS Your electric towel-dryer radiator gives you access to several functions to maximise your comfort in the bathroom: - Shower cycle : provides the following 3 actions: quickly heats your bathroom (pre-set, adjustable temperature of 24 C ), warms your towels (if the shower cycle programme is used ) for when you get out of the shower or bath, and dries them after use. - Boost: operation of the fan for a period of between 5 and 60 minutes, so that the bathroom temperature can rise quickly. - Drying towels: for drying your towels quickly. Mainly used when it is not necessary to heat the bathroom. - Warming towels: electric towel-dryer radiator runs at maximum power for 35 minutes, giving you greater comfort when you get out of the shower or bath. - The shower cycle programme adapts to your way of life. This function gives you a warm bathroom as soon as you enter, as the fan starts up 10 minutes before the cycle is programmed to start. You can programme 3 different shower cycles per day, depending on when you enter the bathroom and how long you spend in it. - The Eco-Comfort programme is preset by default. You can still modify it however, to programme the electric towel-dryer radiator temperature, hour by hour and day by day, in Comfort mode (pre-set, adjustable temperature of 21 C ), or in Eco mode (3.5 C below Comfort temperature). This function optimizes use of the towel-dryer radiator, making significant energy savings. 21

RUN HEATING AND DRYING ONCE ONLY: USE OF SHOWER CYCLE FUNCTION DESCRIPTION This function lets you heat your bathroom (factory-set temperature of 24 C) and dry your towels after use. The period is chosen to suit the length of time you spend in the bathroom. The Shower Cycle programme remains active after the chosen period, to finish drying your towels. HOW TO ACTIVATE THIS FUNCTION Before any action, press one of the keys to turn the screen on. To activate the Shower Cycle function, press the Shower key. You can modify the length of the shower cycle with the + or - key. The time allowed can vary from 5 to 60 minutes. The selected period begins to run. It will be stored in memory for the next time the shower cycle is run. After your chosen period has ended, the shower cycle continues to dry your towels. (the towel drying period is 120 minutes and cannot be altered). When the time has expired, the remote control returns to the main menu. If you press the Back key by accident, the menu asks you if you want to deactivate the function. OK in order not to deactivate the Shower cycle function. The cycle continues. 22

HOW TO DEACTIVATE THE SHOWER CYCLE FUNCTION If you want to stop the Shower Cycle function before the programmed period finishes, press the Back key. Press on < or > to display YES. The shower cycle stops. The remote control returns to the main display. 23

USE THE MANUAL FUNCTION: ACTIVATE BOOST DESCRIPTION This function allows you to activate the electric towel-dryer radiator boost. The fan will heat your bathroom for a period between 5 and 60 minutes. HOW TO ACTIVATE THIS MODE Before any action, press one of the keys to turn the screen on. To activate Boost, press the Menu key. You can alter the Boost period by pressing + or -. OK to run Boost. At the end of the Boost period, the remote control returns to the main display. HOW TO DEACTIVATE THIS MODE To deactivate Boost, press the Back key. Press on < or > to display YES Boost stops. The remote control returns to the main display. 24

USE THE MANUAL FUNCTION: ACTIVATE TOWEL DRYING DESCRIPTION This function allows you to activate towel drying. The towel drying period is 120 minutes. HOW TO ACTIVATE THIS MODE Before any action, press one of the keys to turn the screen on. To activate Towel drying, press the Menu key. Press on < or > to display ACTIVATE DRYING. Towel drying is activated. The drying period is 120 minutes and cannot be altered. At the end of the Towel drying period, the remote control returns to the main display. HOW TO DEACTIVATE THIS MODE To deactivate Towel drying, press the Back key. Press on < or > to display YES. Towel drying stops. The remote control returns to the main display. 25

USE THE MANUAL FUNCTION: ACTIVATE TOWEL WARMING DESCRIPTION This function allows you to activate towel warming. The towel warming period is 35 minutes. HOW TO ACTIVATE THIS MODE Before any action, press one of the keys to turn the screen on. To activate Towel warming, press the Menu key. Press on < or > to display ACTIVATE TOWEL WARMING. Towel warming is activated. The warming period is 35 minutes and cannot be altered. At the end of the Towel warming period, the remote control returns to the main display. HOW TO DEACTIVATE THIS MODE To deactivate Towel warming, press the Back key. Press on < or > to display YES. Towel warming stops. The remote control returns to the main display. 26

USE THE SHOWER CYCLE PROGRAMMING FUNCTION DESCRIPTION This function lets you programme the Shower Cycle function, running the bathroom and towel heating function, and then the towel warming function. The period is programmed according to how long you spend in the bathroom, but the Shower Cycle function will start earlier so that your towels are warm when you enter the bathroom. It remains active after the programmed period, to finish drying your towels. You can programme 3 periods for using the bathroom in one day, to meet the needs of the whole family. Programme example: Choice of day MONDAY Cycle 1: Time to enter the bathroom: 6 am - Length of cycle: 15 minutes What happens in your bathroom: From 5.15am to 5.50 am This function can be activated or deactivated* From 5.50 to 6.15 am From 6.15 to 8.15 am. Towel heating Heating bathroom Towel drying Temperature setting can be modified* This function can be activated or deactivated* - Cycle 2: Time to enter the bathroom: 7.30 am - Length of cycle: 30 minutes - Cycle 3: Time to enter the bathroom: 6 pm - Length of cycle: 30 minutes This programme can be used on other days in the week, so could be copied to TUESDAY, THURSDAY and FRIDAY. Another programme can be set for WEDNESDAY, SATURDAY and SUNDAY - Cycle 1: Time to enter the bathroom: 8.30 am - Length of cycle: 15 minutes - Cycle 2: Time to enter the bathroom: 6.30 pm - Length of cycle: 30 minutes - Cycle 3: No 3rd programme Before adjusting the programming, check that the remote control is already set to the correct date and time. (see page 32). * Adjustable by setting the shower cycle parameters (see page 35). 27

HOW TO PROGRAMME THE SHOWER CYCLE Before any action, press one of the keys to turn the screen on. To use the Shower Cycle programming function, press the Menu key. Press on < or > to display Prog SHOWER CYCLE. You have to choose the day for the programme. Select the day with < or >, then confirm your choice by pressing You have to choose the time you enter the bathroom to start the first shower cycle. Choose the hour with the + or - keys, then confirm your choice with Choose the minutes with the + or - keys, then confirm your choice by pressing You have to enter the length of the shower cycle (from 5 to 60 minutes). Choose the length of time with the + or - keys, then confirm your choice by pressing The first shower cycle period is programmed. 28

You want to programme a Cycle 2 and/or 3 You want to carry on, programming another shower cycle period. Follow the same process as above, and again to create Cycle 3. You do not want to programme a Cycle 2 and/or 3 You do not want to create a Cycle 2 and/or 3, press the + or - keys until NO appears. You can now copy the programming. HOW TO COPY PROGRAMMING Before any action, press one of the keys to turn the screen on. You can copy this programme for one or more days in the week. You can now copy this programme to the next day. Continue by selecting the day with < or >. When you have finished, press the Back key. 29

HOW TO MODIFY A SHOWER CYCLE PROGRAMME If you have made a mistake entering the time you will spend in the bathroom, and you have to programme further Shower cycles, or if you simply want to delete the programme, proceed as follows. Before any action, press one of the keys to turn the screen on. Go back to the Shower cycle programming menu by pressing the Menu key. You can delete the shower cycle programme (completely, on the chosen day). OK Press OK to create a new programme for the day whose programme you have just deleted. OK Start the shower cycle programming again. 30

SELECT LANGUAGE You can select the display language for the remote control. HOW TO ACCESS THE LANGUAGE SELECTION Before any action, press one of the keys to turn the screen on. To access the display language selection, press Menu. Press on < or > to display LANGUAGE. Select your preferred language (Fr for French, En for English, etc.). Change it if required with the + or keys. The screen returns to the main display. 31

SET DAY AND TIME This setting has to be repeated whenever the battery is changed. HOW TO ACCESS DAY AND TIME SETTING Before any action, press one of the keys to turn the screen on. To access day and time setting, press Menu. Press on < or > to display Day and Time. Choose the day with the + or - keys. Change it if required with the + or - keys. Choose the minutes with the + or - keys. The screen returns to the main display. 32

SET PARAMETERS SELECT INTERNAL OR EXTERNAL PROGRAMMING DESCRIPTION Your electric towel-dryer radiator has two programming mode options: - Internal programming that allows you to programming heating periods in Comfort or Eco mode, and the Shower Cycle, directly from your remote control. - External programming that allows you to use the Pilot wire when it is connected to a programmer. See the manual included with your programmer. Note: The default programming mode is Internal programming. HOW TO CHOOSE INTERNAL PROGRAMMING OR PILOT WIRE Before any action, press one of the keys to turn the screen on. To access Choice of programming, press Menu. Press on < or > to display Parameters. Select Internal or External Pilot wire programming mode YES: you want to use Internal programming. Confirm your choice by pressing Confirm your choice by pressing To activate Programming, press < or > until the arrow is on the mode PROG. The remote control shows you whether you are in Comfort or in Eco mode. 33

NO: you want to use External Pilot wire programming Press the + or - keys until NO appears. The Pilot wire will run your programming. The screen returns to the main display. To activate Programming mode, press < or > until the arrow is on the PROG mode. The Pilot wire icon appears. 34

SET PARAMETERS: SELECT SHOWER CYCLE SETTINGS DESCRIPTION The shower cycle function lets you perform 3 actions: heat the bathroom, heat the towels and dry the towels. You can deactivate those you do not want to use and change the temperature for bathroom heating (Comfort +). Before any action, press one of the keys to turn the screen on. To access the Shower Cycle parameters, press the Menu key. Press on < or > to display PARAMETERS. Press on < or > to display SHOWER CYCLE PARAMETERS. Select if you want to keep Towel heating in the shower cycle. Select if you want to keep Towel heating in the shower cycle. Confirm if you want to keep Towel heating, by pressing Press the + or key if you do not want to keep Towel heating. Select the "Comfort +" temperature Press the + or keys if you want to modify the Comfort + temperature. 35

Select if you want to keep Towel drying in the shower cycle. Confirm if you want to keep Towel drying, by pressing Press the + or key if you do not want to keep Towel drying. You have set the parameters for the shower cycle. The screen returns to the main display. 36

SET PARAMETERS: CALIBRATE AMBIENT TEMPERATURE DESCRIPTION After the heating has been on for several hours, you may observe a temperature level that is different from the one shown on your remote control, depending on your installation. In this case, you can calibrate the temperature displayed. E.g.: A temperature of 20 C is displayed on your remote control. The temperature recorded on your thermometer is 19 C => Select calibration value -1 C. Your electric towel-dryer radiator will heat the room to 20 C. Before any action, press one of the keys to turn the screen on. To access the bathroom ambient temperature calibration parameters, press Menu. Press on < or > to display PARAMETERS. Press on < or > to display AMBIENT SENSOR CALIBRATION. Select your calibration value (between -2 C and 2 C) by pressing the keys + or -. The screen returns to the main display. 37

SET PARAMETERS: CALIBRATE COMFORT + TEMPERATURE DESCRIPTION During the shower cycle Comfort + phase (see page 35), it is possible that, depending on the position of the remote control, you will detect a temperature different from that set in the Comfort + parameters (24 C default). In this case, you can calibrate the temperature. E.g.: A Comfort + temperature of 24 C is displayed on your remote control. The temperature recorded on your thermometer is 25 C => Select calibration value +1 C. Your electric towel-dryer radiator will heat the room to 24 C. Before any action, press one of the keys to turn the screen on. To access the bathroom ambient temperature calibration parameters, press Menu. Press on < or > to display PARAMETERS. Press on < or > to display CONTROL SENSOR CALIBRATION. Select your calibration value (between -2 C and 2 C) by pressing the keys + or -. The screen returns to the main display. LOAD-SHEDDING Our appliances are compatible with various load-shedding systems. Never use the method of load-shedding by switching off the mains supply, since this is incompatible with our appliances. It damages the thermostat. Delestage Radiateur = Radiator load-shedding During load-shedding periods, the remote control displays Loadshedding. The electric towel-dryer radiator then returns to its initial operating mode. 38

LOCK CONTROLS We recommend locking the keypad on the remote control to prevent inadvertent operation. HOW TO LOCK THE REMOTE CONTROL Before any action, press one of the keys to turn the screen on. Press Back + OK + Menu for at least 5 seconds to lock the controls. The Lock icon appears. Use the same procedure for unlocking, pressing Back + OK + Menu for at least 5 seconds. The Lock icon disappears. The settings can now be modified. RESTORE FACTORY SETTINGS Your electric towel-dryer radiator has the option of returning to factory settings. Before any action, press one of the keys Press Menu + Back + < for at least 10 seconds. to turn the screen on. Stay near to your electric towel-dryer radiator for pairing the remote control. Set the remote control (see page 12). 39

USING ELECTRIC TOWEL-DRYER RADIATOR WITHOUT REMOTE CONTROL From your electric towel-dryer radiator itself, you can turn on the heating and operate its fan. Using the indicator lights you can also display the status of your electric towel-dryer radiator. STARTING UP THE ELECTRIC TOWEL-DRYER RADIATOR To start-up the electric toweldryer radiator, press the power button on the left side of the fan. If the remote control is not detected, the towel-dryer radiator will operate in Comfort mode at 21 C. The coil indicator shows red if the electric towel-dryer radiator is heating. This indicator is green when the electric towel-dryer radiator is on but not heating. It is off if the electric towel-dryer is stopped (but still powered up). START UP THE FAN To start up the fan press the fan button on the left side of the fan. Your remote control shows Radiator boost. It will run for 15 minutes. The FILTER indicator shows orange when the filter needs cleaning (see page 41). 40

Advice MAINTENANCE The towel-dryer radiator should be dusted twice a year, to maintain its performance (with a soft cloth or the brush fitting of a vacuum cleaner). First turn off the heating by pressing and holding the power button (for about 4 seconds) and allowing it to cool down. Never use abrasive or solvent products. CLEANING THE FAN - Clean the air intake and outlet grilles with a vacuum cleaner. - The fan has a dust filter, which if it becomes clogged, can cause the fan to shut down (orange indicator light on at the bottom of the electric towel-dryer radiator). Clean the filter regularly for optimum use. CLEANING THE FILTER When the filter needs cleaning, the remote control shows: CLEAN FILTER Clean the filter following the instructions printed on the fan. Orange indicator light. Turn off the towel dryer. Pull out the filter from behind the fan. Clean the filter. Replace the filter. Wait 10 minutes before restarting the electric toweldryer radiator. Turn on the electric towel-dryer radiator. 41

IN THE EVENT OF A PROBLEM PROBLEM FOUND The electric towel-dryer radiator is not heating. CARRY OUT CHECK - Check that the installation's circuit-breakers are engaged, or that the load-shedder (if you have one) has not cut power to the electric towel-dryer radiator. - Check the ambient temperature of the room: if too high, the electric towel-dryer radiator will not heat up. The electric towel-dryer radiator - Increase the temperature by pressing the + key. is not warming the bathroom enough. - If the temperature setting is at maximum (28 C), carry out the following checks: Check if there is another heating appliance in the room. Make sure your electric towel-dryer radiator is only heating the room itself. (door closed). Check the electric towel-dryer radiator power supply. Check whether the power of your electric towel-dryer radiator is suited to the size of your room (we recommend 110W / m2 on average). The electric towel-dryer radiator is heating constantly. - Check that the electric towel-dryer radiator is not placed in a draught (door open nearby) or that the temperature setting has been altered. - There may be an issue with the mains supply. In the event of a problem (thermostat stuck, etc.), turn off the power to the electric towel-dryer radiator (fuse, circuit-breaker) for about 10 minutes, then turn it on again. - - If this event happens frequently, check the power supply with your energy company. The electric towel-dryer radiator is very hot to touch. It is normal for the electric towel-dryer radiator to be hot when it is operating, the maximum surface temperature is limited as specified in the NF standard Electricity Performance. If you think that your electric towel-dryer radiator is still too hot, however, check that the power is suitable for the size of your room (we recommend 110W / m2) and that the electric towel-dryer radiator is not in a draught that could affect its setting. The fan stops prematurely. Check that the air intake and outlet grilles are not blocked. If they are, then clean them (see Maintenance section). Check that the room temperature is not too high. If it is, then it is normal for the fan to shut down. Just wait for the ambient temperature to fall before using the fan again. If your home is at an altitude of more than 1000m, the air is less dense, so this could cause the room temperature to rise more quickly. This problem could therefore recur (without a serious impact on the lifespan of the components of the appliance). In all cases, in order to restart the electric towel-dryer radiator, proceed as follows: Turn off heating (long press of about 4 seconds on the Power button ). Wait at least 10 minutes. Restart the heating (press the Power button ). 42

PROBLEM FOUND The remote control recognition procedure does not work. The indicator light flashes. Changing the remote control: pairing the remote control again. The electric towel-dryer radiator is not heating. The remote control shows a message. CARRY OUT CHECK - You inserted the battery while you were too far away from your electric towel-dryer radiator. The remote control screen goes to stand-by: press a key to activate the remote control. Procedure for recognizing the remote control starts. - - The procedure must be carried out within 10 minutes of powering up the electric towel-dryer radiator. The remote control may be too far from the electric towel-dryer radiator. The electric towel-dryer radiator is switched off. To access parameter settings for pairing the remote control again, press Menu. Press on < or > to display PARAMETERS. Press on < or > to display NEW PAIRING Confirm again when YES is displayed. Pairing has worked: The remote control shows ON. Pairing has not worked: the remote control shows OFF: contact the manufacturer's after-sales service. For the following displays, contact the manufacturer's after-sales service: The indicator light flashes. If the following is displayed, replace the battery (type CR2430). The electric towel-dryer radiator is not heating. The remote control shows a message. The fan does not start up. The electric towel-dryer radiator is in Frost-free mode. Your programming unit is in Frost-free mode and has therefore sent the Frost-free command to your appliance, connected via the Pilot wire. The filter must be clogged. The remote control should display "Clean filter". See page 41. 43

PROBLEM FOUND The electric towel-dryer radiator is not heating. The remote control shows a message. CARRY OUT CHECK When there is a power cut, or the electric towel-dryer is turned off, this message appears on your remote control. See page 40 for instructions on restarting your electric towel-dryer radiator. The fan stops during the Shower cycle. The upper and lower parts of the electric towel-dryer radiator are cooler than the rest of the appliance. Traces of dirt appear on the wall around the electric towel-dryer. The electric towel-dryer radiator makes a continuous vibrating noise while heating. The fan operates for at least 10 minutes when the Shower cycle is activated. It may then stop if the room temperature reaches 24 C. The fan restarts to maintain this room temperature. - The upper elements are not filled completely, to allow expansion of the thermodynamic fluid. They heat up only through conduction. - The lower elements carry the returning fluid after it has transmitted its heat. In a polluted environment, dirt may appear on the air outlets of the appliance or on the wall. This is linked to poor quality ambient air (smoke from cigarettes, candles, incense, chimney, etc.). In this case, it is recommended that the airing of the room is checked (ventilation, air intakes, etc.). Such dirt deposits do not justify replacement of the electric toweldryer radiator under the terms of the warranty. Check it is properly fixed to its support. If the electric towel-dryer radiator is fixed to a hollow partition wall, it may vibrate. 44

Thank you for your choice and your confidence. The NEFERTITI INTEGRAL ROTATING electric towel-dryer radiator that you have just purchased was subject to thorough testing and checking to ensure quality and your complete satisfaction.

WARRANTY DOCUMENT TO BE RETAINED BY USER FOR PRESENTATION ONLY IN THE EVENT OF A CLAIM The warranty period runs for 2 years from the date of installation or purchase and may not exceed 30 months from the date of manufacture, without supporting documentation. Atlantic provides exchange or supply of parts found to be faulty excluding any payments for damages or interest. The user meets all costs of transport, labour and handling. Damage resulting from incorrect installation, from a mains supply that does not comply with standard NF EN 50160, from abnormal usage or failure to comply with the instructions contained in the said manual is not covered by the warranty. The provisions of these warranty terms and conditions do not exclude the purchaser s right to benefit from the legal protection applicable in all cases regarding hidden faults and defects, as specified in articles 1641 onwards of the Civil Code. Present this certificate only in the event of a claim made to the distributor or your installer, attaching your purchase invoice. TYPE OF APPLIANCE*: SERIAL NO.: NAME AND ADDRESS OF CUSTOMER: *this information is shown on the panel on the left hand side of the appliance. Distributor s stamp All disputes are covered solely by the jurisdiction of the courts of La Roche-sur-Yon.