REDUCED PROFILE INTRODUCTION

Similar documents
COMPACT SIZE INTRODUCTION & LOGIC

UTILITY LIGHT INTRODUCTION

Applications. Standard Materials

LED SOLUTIONS Harsh and Hazardous Products

50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard

100 KILLARK L E D. EXPANDING RANGE of HARSH & HAZARDOUS LED LUMINAIRES and SYSTEMS. Class I, Div. 1 & 2 Zones 1 & 2 MINI-CATALOG HSI = GREEN

LMV Series W Low Profile - Medium Base

EVLPF Series Compact Fluorescent

N2MVF Series Compact Fluorescent

LED FLOOD LIGHT SOLUTIONS Harsh and Hazardous Products

elevated ambient capability. in installations where moisture, dirt, dust, vibration, corrosion and rough usage are problems.

DMV Series W For Combustible Dusts

EVLED201 36W Led Luminaire. Descriptions. Manufacturer Information. Packaging Carton 1 Weight Per each 14.85

Explosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67

Explosion Proof 70 Watt Low Profile LED Light Fixture Lumens - C1D1 Group B - Hydrogen Rated

Hazardous Area LED Lighting Hazard Gard LED Luminaires. Hazard Gard EVLL LED

Explosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4'

C1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount

150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam

50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved

Table 500-3(d) Identification Numbers. Maximum Identification

C2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens

Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications. Now cul Listed!

Enhancing Safety + Productivity. Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications

Explosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps

25W Hazardous Location Integrated LED Light Fixture Lumens - Low Profile - ATEX IEC CSA UL

Explosion Proof Light Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1

Low Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer C1D1 - C2D2 - ISO 14644/FS-209E

Code Master Factory Sealed Strobe Luminaires Explosionproof, Dust-Ignitionproof

Pro Series LED Lighting Champ LED floodlights. Champ Pro Series. LED floodlights for heavy industrial

Explosion Proof LED Light - Equivalent to Watt HID C1D2, UL Listed

UL Listed Available with Cl. I, Div. 2, Groups A, B, C, D rating

48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2

26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE

Rating. Class I Div II

Explosion Proof LED Light - Equivalent to Watt Metal Halide - Class 1 Division 2

*RENTAL* Class 1 Division Watt Incandescent Light - Explosion Proof - Wall Mount Volts

300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated

Hazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp

80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup

Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style V Dimmable

VAPORGARD Incandescent Luminaires

SIMPLIFIED LIGHTING. TRUSTED PROTECTION. CODE MASTER LED LUMINAIRES CLASS I, DIVISION 1

Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs

CATALOG NUMBER NAME DESCRIPTION HTL X Keeper 2 40 Watts 120v 5000K 4,000 Lm HTL X Keeper 2 40 Watts 277v 5000K 4,000 Lm 4.

208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC

100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord

Enhancing Safety + Productivity. Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications

MAR2 LED SERIES M A R 2 L E D. Linear LED Lighting for Hazardous Locations

Explosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1

4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2

150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24" Stand - Class I Div 1 C&D V

Explosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips

Dimensions (111mm) 3 (76mm) (111mm) (48mm)

25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame V AC

Dimensions (111mm) (111mm) 3 (76mm)

Explosion Proof Exit Sign - Class I, Division I - IP65-120V/277VAC - Emergency Battery Back-Up

150W Explosion Proof LED Flood Light - Surface Mount Lumens - C1D V AC

Champ-Pak Wall Pack Luminares

120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones

Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications. Now cul Listed!

HL-2449_flg:8 pager 6/17/10 11:19 AM Page 1 Tear Drop LED Series

CEC: Class I, Division 2, Groups A, B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Enclosure 4X

LED lighting for light industrial areas IHB series high bay LED luminaires. IHB series. High bay LED luminaires for light industrial areas

100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof

60W Flameproof LED Emergency Linear Fixture V AC - (2) 30W LED Lamps - ATEX/IECEx

Bright Ideas. Innovative Solutions. Product Catalog. INDUSTRIAL AND HAZARDOUS Lighting Solutions

MERCMASTER LED SERIES

Choice of factory set distributions. Thermally set white polyester powder paint. Optional wet location listing

Champ-Pak TM Wall Pack & Floodlight Luminaires Hazardous and Non-Hazardous

SDL4 LED Strip Diffused Lens

T8 Self Ballasted UL & CSA LED TUBE RETROFITS

BAS SDL8' LED Strip Diffused Lens

Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2

An Eaton Intelligent Power solution. Champ VMV Connected lighting for hazardous areas

Industrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved Nanometer

40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated

120W Hazardous Location LED Fixture V DC - Modbus TCP/IP - Network Controlled - Dimmable

100W Portable Explosion Proof LED Light - (2) LED Lamps - Non-Spark Aluminum Base - Inline Switch

DuroSite LED High Bay - UL for Indoor and Outdoor Industrial Applications. Patent Pending

56W Hazardous Location LED Fixture - C1D2 - Stainless Steel - Dimmable - DALI Network

WARNING WARNING. Installation Instructions for 116DEXSTC-FJ AdaptaBeacon Fire Alarm Strobe Lights for Use in Hazardous Locations.

LED lighting for land-based rigs Pauluhn DLL LED Luminaires. Pauluhn DLL. LED luminaires for land-based drilling

Lighting for Hazardous & Severe Environments

ARRAN LED LED FLOODLIGHT. Standard Specification. Features

50-175W VMV Series Champ H.I.D. Luminaires

150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D

Vaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant Lumens

VIENTO MEDIUM AREA & SITE LED LUMINAIRE OPTICS

S R 8 Circular LED Engine Product Specification

Class 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors

MN/DOT Specification Sign Lighting Luminaire With 150 or 250 Watt Metal Halide Lamps 11/05/09

Explosion Proof Light - Base Stand Mount - 16 Inch Watt LED - Class I Div 1 C&D

CPPG ENERGY EFFICIENT CANOPY LIGHTS FOR PARKING AREAS

DuroSite Series LED High Bay - UL for Indoor and Outdoor Industrial Applications. Patent Pending

CLM 422 Series LED Ceiling Luminaire Module - 45Watt

Installation Instructions for 116DEGEX-FJ-(R) AdaptaBeacon Fire Alarm Strobe Lights for Use in Hazardous Locations

BAYMAX TM LED LINEAR HIGHBAY FIXTURE BLHT SERIES

V2LCHF2UNV1 Led Lumnr. Features. Material, Color, and Finish. Long Description. Manufacturer Information EATON CROUSE-HINDS SERIES GTIN

56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network

Transcription:

KILLARK REDUCED PROFILE INTRODUCTION Class I, Div. 2, Groups A,B,C,D Class l, one 2, Groups llc,llb,lla Class II, Div. 1 & 2, Groups E,F,G Class III uitable for wet locations Marine Rated (U only) Type 3, 4X Certified - File LR11713 FEATURE-PECIFICATION Applications CertiLite V VM1L LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or Type 3 and 4X areas where wind, water, snow, or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. Typical applications include manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and storage facilities. Compliances UL-8750 for LED lighting UL-844 tandard for lighting fixtures for hazardous locations, Class I, Division 2; Class II, Divisions 1 and 2; Class III CA C22.2 no. 137-M1981 electric luminaries for use in hazardous locations Enclosed and gasketed Type 3, 4X Materials Housing, splice box and cast guards corrosion resistant copper-free aluminum alloy Baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection All external hardware - stainless steel Reflectors - Polyester reinforced fiberglass LED Luminaire Features and tandards upplemental 20KA/10KV urge Protection is standard (for 120-277 VAC models) 10KA/10KV urge Protection (for 347-480 VAC) Reduced profile with Traditional Industrial Appearance and uitability Wide variety of optics including globes, globes with reflectors, all-glass refractors, and spin-top refractors wing-barrel Nut patented tank mounting system Optional Mounting arrangements including Pendant, Wall, Ceiling, tanchion and others VM1L LED Housings can be retrofitted to existing VM splice boxes; upgrade from HID sources Energy avings less than 55 Watts of Power wing-barrel Nut (Patented) Hang Fixture Polycarbonate 12 pin-top Refractor VRG2550 LED Array Life 100,000+ hours with 70% initial lumens Long Fixture Life 50,000-55,000 maintenance free hours Crisp White Light for Excellent Color Rendering Chromaticity 5000 K (CCT); 70 CRI Ambient suitability -40 C to 55 C Instant on including after power interruption World Voltage 120-277VAC 50/60Hz older-le LED Board Connections Vibration Resistant Dual Driver Option (DDR) For additional energy savings, half of the fixture can be turned off wing into Place Tighten Photo controls Class I Div. 2 / N4X areas Available as Field or Factory Installed to save energy when light not required. Earthquake Tab Built-in attachment point for safety cables. afety: ecures fixture to structure in case of conduit failure. L24

KILLARK H A LO C REDUCED PROFILE CATALOG LOGIC CertiLite V LED Catalog Number Logic Housing eries 5-1/2 thread w/driver and LED s Lamp Wattage 40W LED 50W LED Voltage 05 480VAC 50/60 Hz 15 347VAC 50/60 Hz 27 12-24VDC 30 120-277VAC 50/60 Hz Mounting Type A Pendant X Ceiling B Wall Bracket C Cone Top E E Mount Adapter D tanchion 25 tanchion traight 90 N None (mount ordered separately) VM1L 50 30 0 0 00 0 00 Options F ingle Fuse (Not to be used in Canada) FF Double Fuse (Not to be used in Canada) TBX Terminal Blocks X= Variations (May be alphanumeric to indicate terminals) P1 Photocell 120V (C1D2 only) Factory Installed P2 Photocell 208-277V (C1D2 only) Factory Installed QD QD Wired at Driver CP Component Pack (Tank w/mount, optic, guard - LED s included in tank) AN Assembled (Tank w/mount, optic, guard- LED s included in tank) DDR Dual Driver Option Guard G Guard (Globes & Glass refractors) N No Guard Entry (Mounts available) 2 3/4 NPT (A,B,C,X) 3 1 NPT (A,B,C,X) 4 1 1/4 NPT (D,) 5 1 1/2 NPT (D,) 6 3/4 NPT 5-Hub (X) 7 1 NPT 5-Hub (X) 8 M20 4-Hub (X) 9 M20 5-Hub (X) E Mount Adapter N None (mount ordered separately) Optic GL Globe R5 Type V Refractor (all glass) 8 Type V 8 pin-top Refractor 5 Type V12 pin-top Refractor P5 Polycarbonate Type V 12 pin-top Refractor EE OFTWARE FOR LATET LED PHOTOMETRY L25

KILLARK REDUCED PROFILE ORDERING INFORMATION PENDANT CEILING WALL CONE ORDERING INFORMATION PENDANT WITH OPTIC AND GUARD 40 3/4 120-277VAC VM1L4030A2GLG VM1L4030A2R5G VM1L4030A28G VM1L4030A25G 50 3/4 120-277VAC VM1L5030A2GLG VM1L5030A2R5G VM1L5030A28G VM1L5030A25G CEILING WITH OPTIC AND GUARD 40 3/4 120-277VAC VM1L4030X2GLG VM1L4030X2R5G VM1L4030X28G VM1L4030X25G 50 3/4 120-277VAC VM1L5030X2GLG VM1L5030X2R5G VM1L5030X28G VM1L5030X25G WALL WITH OPTIC AND GUARD 40 3/4 120-277VAC VM1L4030B2GLG VM1L4030B2R5G VM1L4030B28G VM1L4030B25G 50 3/4 120-277VAC VM1L5030B2GLG VM1L5030B2R5G VM1L5030B28G VM1L5030B25G CONE WITH OPTIC AND GUARD 40 3/4 120-277VAC VM1L4030C2GLG VM1L4030C2R5G VM1L4030C28G VM1L4030C25G 50 3/4 120-277VAC VM1L5030C2GLG VM1L5030C2R5G VM1L5030C28G VM1L5030C25G L26

KILLARK H A LO C REDUCED PROFILE ORDERING INFORMATION TANCHION 25 TANCHION TRAIGHT E ADAPTER ORDERING INFORMATION 25 TANCHION WITH OPTIC AND GUARD 40 1-1/2 120-277VAC VM1L4030D5GLG VM1L4030D5R5G VM1L4030D58G VM1L4030D55G 50 1-1/2 120-277VAC VM1L5030D5GLG VM1L5030D5R5G VM1L5030D58G VM1L5030D55G TRAIGHT TANCHION WITH OPTIC AND GUARD 40 1-1/2 120-277VAC VM1L40305GLG VM1L40305R5G VM1L403058G VM1L403055G 50 1-1/2 120-277VAC VM1L50305GLG VM1L50305R5G VM1L503058G VM1L503055G E ADAPTER WITH OPTIC AND GUARD 40 NA 120-277VAC VM1L4030EGLG VM1L4030ER5G VM1L4030E8G VM1L4030E5G 50 NA 120-277VAC VM1L5030EGLG VM1L5030ER5G VM1L5030E8G VM1L5030E5G MOUNTING BOXE FOR E ADAPTER CATALOG NUMBER PENDANT CEILING BRACKET TANCHION HUB IE EA2 EX2 EB2 3/4 EA3 EX3 EB3 1 ED4A 1-1/4 /1-1/2 Pendant Wall Bracket Ceiling 25 tanchion EE OFTWARE FOR LATET LED PHOTOMETRY L27

KILLARK REDUCED PROFILE COMPONENT Pendant Ceiling Wall Cone Top HUB IE 25 tanchion traight tanchion E Adapter* VMEA * VMEA is used between a driver tank and an E mount-ordered separately. * * Furnished with non-metallic plugs. Also available: VMB10B wall 4xM25 hubs, and VMB810B 2xM20 side hubs and 2xM25 top/bottom Tank Adapter CERTILITE V VM MOUNTING PLICE BOXE CATALOG NUMBER PENDANT CEILING 4 HUB CEILING 5 HUB WALL CONE TOP 25 DEGREE TANCHION 90 DEGREE TANCHION 3/4 VMA2B VMX2B VMX6B VMB2B VMC2B 1 VMA3B VMX3B VMX7B VMB3B VMC3B 1-1/4 VMD4B VM4B 1-1/2 VMD5B VM5B M-20 VMX8B** VMX9B** VMB8B** VM1L LED OPTIC AND ACCEORIE DECRIPTION OPTIC LOGIC GUARD Globe (glass) VMG17 (GL) VMAG17 Refractor (all glass) Type V VMR175 (R5) VMAG17 Refractor (spin top) 8 Type V VRG1550 (8) VMRWG8 Refractor (spin top) 12 Type V VRG2550 (5) VMRWG Refractor polycarbonate (spin-top) 12 Type V VRP175 (P5) VMRWG DOME REFLECTOR (Polyester reinforced fiberglass) VMPD40 NA ANGLE REFLECTOR (Polyester reinforced fiberglass) VMPA40 NA 120VAC Photocell with F tyle Cover VMFPC1 NA 208-277VAC Photocell with F tyle Cover VMFPC2 NA 3-sided EXIT Accessory (use without guard) VEXA100B NA Tank adapter to Crouse-Hinds VM eries mounts* VMCHVM NA CATALOG NO. VM1L4005 ORDERING INFORMATION AND AMBIENT UITABILITY C1D2 C2D1 L70 WEIGHT LB./KG WATT VOLTAGE AMP VMG15 VMR175 40 C 55 C 40 C 55 C TM-21 CALCULATED LUMEN LUMEN 480 VAC 0.09 VM1L4015 347 VAC 0.13 40 VM1L4027 12-24VDC 3.33-1.67 VM1L4030 15.50 / 120-277VAC 0.36-0.16 VM1L5005 7.03 480 VAC 0.10 VM1L5015 347 VAC 0.14 50 VM1L5027 12-24VDC 4.17-2.08 VM1L5030 120-277VAC 0.43-0.18 5267 5060 T6 T5 T4 (EFG) 60100 270,000 6162 6427 T5 T4A T4 (EFG) 72600 278,000 O P T I C A C C E O R I E VMG17 VRG1550 VMAG17 VMPD40 VMFPC1 VMR175 VRG2550 VMRWG8j VMRWGj VMPA40 VEXA100B TYPICAL WEIGHT (LB.) W/ TANDARD GLOBE AND GUARD - Pendant 23.00 Ceiling 24.10 Wall 27.50 tanchion 23.90 L28

KILLARK H A LO C REDUCED PROFILE DIMENION & WEIGHT hole dia..34 (8.63) Pendant Mount Ceiling Mount Cone Mount hole dia..30 (7.62) Wall Bracket Mount 13.67 (347) tanchion (25 ) Mount 13.55 (344) tanchion (0 ) Mount 1.70 (43) 2.56 (65) 6.88 (175) 11.35 DIA. (299) 4.33 (110) 10.77 (274) 8.21 (208) 10.77 7.74 (274) (197) 1.25 (32) 12.07 (307) 6.75 (171) VM1L Tank Globe & Guard 5.31 DIA. (135) VM1L Tank w/pendant M ount & Globe 13.58 (345) 2.63 (67) 13.58 (345) 10.77 (274) 7.74 8.21 (197) (208) 5.62 (143) 8.21 (208) 7.74 (197) 10.78 (274) 13.34 (339) 16.87 DIA. (428) VM1L Tank with Dome Refractor 14.75 DIA (375) VM1L Tank with Angle Refractor 11.87 DIA. (301) 13.58 (345) 8.82 (275) 8.25 (210) 12.73 (323) 10.17 (258) 8.16 DIA. (207) VM1L Tank with 8 pin-top Refractor 12.19 (310) VM1L Tank with 12 pin-top Refractor EE OFTWARE FOR LATET LED PHOTOMETRY L29

KILLARK VM LED ERIE FIXTURE MOUNTING TYPE HOUING FIXTURE AEMBLY GUIDE Pendant Cone Top 25 tanchion E Adapter VMEA Tank Adapter Ceiling Wall traight tanchion TANK VM1L VM2LC VM4LC VM2LB VM4LB OPTIC VMG17 VMR175 VRG1550 VRPF VMG25 VMR255 VRGF VMR253 VMR251 VRG4050 VRG4020 VMEP40 VMER40 GUARD VMAG17 VMRWG8 VMRWG VMERG VMAG25 VMRWG VMAGBC REFLECTOR VEXA100B VMPD40 VMPA40 HRD400 VEXA400 HRD400AL VMPD40 VMPA40 L30