Shandon Excelsior Tissue Processor The new center of excellence in tissue processing.

Transcription

1

2

3 1 Shandon Excelsior Tissue Processor The new center of excellence in tissue processing. Histology 2 remote alarms signal possible problems. Automatic underfill recovery finishes processing in the safest environment possible. Ease of use. Automatic in-process reagent rotation. Reagent Cost Savings. Unique reagent monitoring and management system. Ragent quality of the first alcohol is measured using specific gravity and alerts operator when it is no longer usable. Quality of Results. Flexible enough to accommodate most commercial 3.8 to 5 liter reagent bottles. Easy-to-read screens with colorful graphics. Circular design allows greater temperature uniformity. No hot spots and the even distribution of reagents enable consistent processing of specimens. Tissue Processors Shandon Excelsior The Shandon Excelsior Tissue Processor is the most advanced tissue processor using traditional reagents today. It comes equipped with unique and outstanding features to provide benefits of safety, ease of use, increased productivity, reagent cost savings and quality of results to the user: Safety. Built-in Downdraft Ventilation which minimizes the operators exposure to hazardous vapors. Fumes are vented and absorbed through a Potassium Permanganate filter before getting into open air. Reagent storage cabinet is built to enhance safety and is vented through 2 additional filters for further fume control. Specimen safety and protection is accomplished by battery back-up. Easy programming and operation. User-friendly software is like having an electronic user s manual at your fingertips. International icons alert operators to anything that needs attention. Increased Productivity. Systematic logging and reporting of quality control data, event records and program information. Laboratory Information Management System interface capability. Preheating option for reagents allows for more consistent processing and rapid biopsy runs. Three distinct fill levels in the chamber to shorten processing times. Organized and random baskets are microwavable and designed to be used in conjunction with microwave pre-fixation (see pages 7 and 8 for details about the new Shandon TissueWave Microwave Tissue Processing System). Continuous agitation circulates reagents freely around specimens. Organized basket is designed for maximum reagent infiltration around specimens by not allowing cassette bunching. Other features of the Shandon Excelsior include: Organized basket to process 222 cassettes and random basket to process up to 300 cassettes* Sloped lid design allows excess condensation removal during processing. Glass lid allows viewing during processing. 12 customized programs and 3 flush options. 3 wax baths. Multilingual. 7 password protected areas. Remote Monitoring / Diagnostics. *When using 5.0 L reagent bottles. Refer to Application Note Shandon Excelsior Random Basket Cassettes.

4 2 Intelligent software Reagent rotation. Shandon Excelsior Specifications Shandon Excelsior V, 50/60 Hz, 1 Ph A Downdraft fume control. Filters and downdraft extraction duct adapter kit. Microwavable baskets. Interior of reagent storage cabinet. Physical Specifications Dimensions (H x W x D) 63 x 26.5 x 20.5 (160 x 67 x 52 cm) Weight lbs. (112 kg) Power Requirements 950VA (maximum); 200VA (typical) Included with Product* Formaldehyde (Potassium Permanganate) Filter - Each Vapor Filter (Charcoal) - Each Organized Basket - 6 Baskets A Random Basket A Basket Lid (Organized and Random) A Large Block Metal Divider (for Random Basket) A Water Flush Bottle + Cap A Storage Bottles - 5 Liter (2 supplied) See Below Waste Wax Drawer Assembly - 2 Drawers, 2 Lids, 1 Cover See Below Monitor AP14340 Operator Manual (Specify Language) A Service Record Book A Spatula P09046 Wax Fill Chute A Wax Waste Liners - 20 / Pk. AP14747 Wrench / Spanner A Screen Information Card A *Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Formaldehyde (Potassium Permanganate) Filter - 6 / Pk. B CS Vapor Filter (Charcoal) - 6 / Pk Service Manual A Waste Wax Drawer Kit - 1 Drawer, 1 Lid A Plastic Basket Carrying Container (microwavable) B Storage Bottles - 5 Liter - 6 / Pk. A Downdraft Extraction Duct Adapter Kit A Main Air System Duct Adapter Kit A Monitor Clamp Kit A Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Histology Tissue Processors Shandon Excelsior

5 3 Shandon Pathcentre Tissue Processor Enclosed tissue processor. The Shandon Pathcentre is a high-volume, totally enclosed tissue processor that allows complete user control and excellent continuous reagent agitation. Practical Design. Up to 306-cassette capacity plus the ability to add up to three extra processing modules for high throughput laboratories. Totally enclosed. Fumes stay within the system, and do not escape into your lab. Gentle counter-stir agitation and Shandon tidal flow system promotes maximum fluid penetration through baskets and cassettes for the ultimate in processing quality and consistency. 4 wax baths provide excellent specimen infiltration. Circular reaction chamber optimizes temperature uniformity. Glass reaction chamber lid allows visual inspection of processing. Lid automatically locks during processing. Sealed reaction chamber lid is easily opened with one hand. Plug-in reagent bottles have colorcoded labels and are engineered for ease of use. Flexible Programming. Simple multi-lingual programming with full on-screen prompt graphics. Back-lit LCD monitor displays commands in English, French, Spanish, German, Italian or Swedish. User selectable processing parameters include heat, vacuum, pressure, immersion time, drain time and agitation. Stores 9 processing programs for each module. Wide reagent compatibility includes acetone and chloroform. Delayed start can be programmed in any reagent position. Options for heat, vacuum pressure, and agitation can be changed during delayed time. Real time programming with built-in clock and delayed start facility for overnight, weekend, and holiday periods. It can be programmed up to 7 days in advance. Multilevel pass-code security protects instrument from unauthorized access. Histology Tissue Processors Shandon Pathcentre The practical design of the Shandon Pathcentre provides a 306-cassette capacity basket plus the ability to add up to three extra processing modules for high throughput laboratories. The Shandon Pathcentre s Closed Loop System ensures that fumes stay within the system and do not escape into your lab. A gentle counter-stir agitation and tidal flow system combine to promote maximum fluid penetration through baskets and cassettes for excellent processing quality and consistency. A circular reaction chamber optimizes temperature uniformity, and enhances continuous agitation. The Shandon Pathcentre is also designed to allow flexible, real-time programming for up to 9 processing programs. Simple multi-lingual programming is displayed on a back-lit LCD monitor that displays commands in English, French, Spanish, German, Italian or Swedish with full on-screen prompt graphics. A user can decide between selectable processing parameters including heat, vacuum, pressure, immersion time, drain time, and agitation. A built-in clock enables selection of immediate-start or delayedstart functions for overnight, weekend, and holiday periods. Quality control indicators automatically alert you when to change reagents and perform maintenance/service procedures. Wax Reagent Air The Shandon Pathcentre s Closed Loop System captures fumes from reagents inside the instrument.

6 4 Specimen Safety. Automatic underfill recovery system protects your specimens by automatically rerouting reagents and completing processing. Independent, selectable flushes either standard flush or extended flush. Water rinse option can be selected at the end of flush. Audible and remote alarm signals are standard. Hard copy print-out of records including programs, processing routines and real-time events is available when connected to a parallel 80-column printer. Quality Control Automatic alerts when it is time for routine maintenance and service or to change reagents. On-screen graphics guide the user through program commands. The screen displays the current status of the procedure. In the state-of-the-art reaction chamber, reagent circulates freely around specimens. Shandon Pathcentre Specifications Shandon Pathcentre Random Basket V, 50/60Hz Shandon Pathcentre Random Basket V, 50/60Hz Shandon Pathcentre Organized Basket V, 50/60Hz Shandon Pathcentre Organized Basket V, 50/60Hz Extension Unit Random Basket V, 50/60Hz Extension Unit Random Basket V, 50/60Hz Extension Unit Organized Basket V, 50/60Hz Extension Unit Organized Basket V, 50/60Hz Physical Specifications Dimensions (H x W x D) 52 x 22 x 25 (132 x 56 x 33 cm) Weight 353 lbs. (160 kg) Power Requirements 1200VA Included with Product* Wax Drain Container Reagent Storage Bottles (12 included with unit) See Below Reagent Bottle Labels Charcoal Filter Tissue Basket Handle Viton Lid Seal Cassette Basket See Below Reagent Bottle Pour Spout P13433 Spatula P09046 Wax Drain Key P12648 Operator Manual (Specify Language) Quick-Reference Cards A Service Record Book A * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Large Block Basket (1 Segment) Random Cassette Basket (1 Segment) Organized Cassette Basket (1 Segment) A Note: The Pathcentre reaction chamber holds three basket segments. Organized, random or large block baskets may be used in combination. Reagent Storage Bottles - 3 / Pk. A Airbag - 4 / Pk Reaction Chamber Drain Filter - 2 / Pk Wax Chamber Seal - 4 / Pk Wax Disposal Bag - 10 / Pk Displacement Block (Organized Basket Only) A Service Manual Printer Printer Cable Bottle Connector Seals - 3 / Pk Reagent Bottle Caps - 3 / Pk. A PTFE Lid Seal Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Histology Tissue Processors Shandon Pathcentre

7 5 Shandon Citadel Tissue Processor Carousel-type tissue processor. Shandon Citadel Specifications Histology Shandon Citadel V, 50/60Hz Shandon Citadel V, 50/60Hz GER Shandon Citadel V, 50/60Hz USA Shandon Citadel V, 50/60Hz Shandon Citadel V, 50/60Hz GER Shandon Citadel V, 50/60Hz USA Shandon Citadel V, 50/60Hz EUR Shandon Citadel V, 50/60Hz EUR Tissue Processors Shandon Citadel Order vacuum unit separately. The Citadel 2000 has a 110-cassette capacity, and the Citadel 1000 has a capacity of 60 cassettes (with organized baskets). Reagent stations are easily removed from the unit for replenishing. Delayed-start feature may be programmed up to 9 days in advance. Hand-held touch key controller is simple to use. Store up to 4 complete programs in the Citadel s memory. Program immersion time during each step. Loading station protects tissue baskets from air as the baskets are raised. User is protected from open containers. The unit fits in most standard fume cabinets, as well as the Shandon Hyperclean 2 Work Station. Optional vacuum unit facilitates efficient and rapid wax infiltration of specimens. Has 10 reagent containers and 2 wax baths. Random and organized baskets available. Tissue baskets load and unload easily with hanger clips in the unit s hood. See Shandon Processing Reagents on page 9. Physical Specifications Dimensions Citadel: Diameter: 27.2 x Height: 25 (68 x 62.5 cm) Vacuum Unit: 7.7 H x 10.2 W x 13.4 D (19.5 x 26 x 34 cm) Weight (Citadel Only) 115 lbs. (52 kg) Power Requirements (Citadel Only) 500VA Included with Product* Citadel 2000 Organized Basket Random Basket Basket Hanger (2L) Basket Lid Wax Baths 110V Wax Baths 240V Reagent Container (Polypropylene) Reagent Container (Stainless Steel) Shandon Citadel Operator Manual (Specify Language) Service Record Book A Citadel 1000 Organized Basket Random Basket Basket Hanger (1L) Basket Lid Wax Baths 110V Wax Baths 240V Reagent Container (Polypropylene) Reagent Container (Stainless Steel) Shandon Citadel Operator Manual (Specify Language) Service Record Book A * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Vacuum Units for Shandon Citadel V Vacuum Units for Shandon Citadel V Vacuum Units for Shandon Citadel V A Cassette Organized Basket Cassette Organized Basket Shandon Citadel Service Manual Shandon Vacuum Unit Operator Manual (Specify Language) Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant).

8 Shandon Netmon Service 6 Shandon Excelsior Netmon The Shandon Excelsior Netmon service includes: Monthly preventive maintenance review. Monthly monitoring report for inclusion in the customer s Quality Management system. Rapid on-line diagnosis and resolution of system problems. Escalation to service call, if required, with dispatch of needed spare parts. On-line technical support to resolve operational issues. Customized Monthly Report provides the following information: Four fundamental system tests. Fluid Transfer Check. Peak Fluid Temperatures. Alcohol Quality Measurement. Error Checks. Signature of Service Support Engineer. Shandon Excelsior Netmon is a service that directly connects the Shandon Excelsior in the customer s laboratory to the Thermo Electron Service Support Centers in Pittsburgh, U.S.A., and Runcorn, U.K.* By using a dedicated telephone line at the customer site, high-value support services are made available to the user in a realtime manner. Please contact your local Sales Representative for ordering information. Shandon Pathcentre Netmon A similar remote monitoring service is also available for the Shandon Pathcentre Tissue Processor to program and monitor the unit from any location via modem and personal computer. The service enhances preventive maintenance capabilities. Thermo Electron service technicians may access the unit (with your permission) from their base* to perform on-line diagnostics or provide monthly monitoring service. Please contact your local Sales Representative for ordering information. Histology Tissue Processors Shandon Netmon Service *Netmon is only available in the United States and United Kingdom.

9 7 Shandon TissueWave Microwave specimen processing and staining system. PRESENTLY AVAILABLE IN THE U.S. ONLY. (Consult with your local distributor for future availability.) Histology Tissue Processors Shandon TissueWave The Shandon TissueWave Specimen Processing System is used for tissue fixation and processing, decalcification of hard material, routine special stains where heat would accelerate the staining process, and for epitope enhancement during immunohistochemical staining. It is designed for greater flexibility to meet the growing workload demands. This user friendly instrument will free up technical time for more complex procedures. The Shandon TissueWave will consistently deliver uniformly excellent results in a fraction of the time. Laboratory safety is always an important consideration when purchasing equipment. The Shandon TissueWave has a ventilation system interlock that prevents the unit from operating if there is not adequate air flow established through the microwave chamber. This prevents the unrealized possibility of dangerous and toxic fumes from accumulating. Control of the Shandon TissueWave is monitored by two separate parameters; either by temperature or total power control. Temperature may be further defined by measuring total time (including the ramp time to achieve the correct temperature) or by the time at temperature for a particular Preset. Sleek, modern design. Ventilation system to remove dangerous and toxic fumes. Programmable, 40 Preset functions. Vacuum chamber for rapid fixation and paraffin infiltration. Temperature and power controls, ability to convert wattage protocols. The most accurate temperature control of any pulsed power microwave. One cycle/one second pulsing power mode. Easy to use display screen and control panel. Handle RUSH specimens effectively. Frees up technical time for more complex procedures. Provides processing and warning messages throughout use. Temperature probe that guarantees accurate temperature control to ± 1 C. Compatible with Shandon Excelsior Processor organized baskets. Shandon TissueWave vacuum chamber. A custom designed vacuum chamber is an added accessory that comes with the Shandon TissueWave. This unique chamber allows for more rapid microwave fixation and consistent paraffin wax infiltration. The Shandon Excelsior Tissue Processor baskets may be used in conjunction with the Shandon TissueWave Microwave Processor to meet all tissue processing needs.

10 8 Shandon TissueWave Specifications Shandon Excelsior organized basket. Shandon TissueWave LCD display. The Shandon TissueWave has an interactive LCD display screen that directs and instructs the user throughout the operation of the unit. The keypad control panel is easy to use. Universal symbols are used for multiple languages. The system allows for 40 Preset steps for multiple processing and staining procedures. These Preset steps are user defined and can be run on demand. Air agitation, internal light switch, and vacuum may be defined within a Preset or controlled independently from the control panel. Shandon TissueWave V, 60Hz B V, 50/60 Hz B Specifications Dimensions (H x W x D) 19 x 21.5 x 24.5 (48.2 x 54.6 x 62.2 cm) Chamber Dimensions 9.5 x 13.5 x 15.5 (24.1 x 34.3 x 39.4 cm) Weight 77 lbs. (169.4 kg) Power Requirements 120V system - 15 amp service minimum (20 amp recommended) 230V system - 10 amp service minimum (15 amp recommended) Included with Product* Air agitator tubing B Excelsior organizer basket - 2 supplied See Below Air Adjustment screw B Fuse, 15A B AC Input Fuse Holder B Interior Lamp B Microwavable Specimen Containers B Operator s Guide B Temperature Probe B Vacuum Chamber B * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Excelsior Organized Baskets - 6 supplied A Microwavable Plastic Coplin Staining Jar 194 Microwavable Plastic Spill free slide Jar - Each / Pk / Cs Plastic Staining Dish and Cover 195 Plastic Staining Rack-25 slide capacity 196 Staining Kits See Pages Rapid Mucin Stain Kit B Periodic Acid Schiff s Stain Kit B Gomori s Trichrome Stain Kit B Agency Approvals Histology Tissue Processors Shandon TissueWave Shandon TissueWave keyboard control panel. Results shown using the Shandon TissueWave with Shandon Zinc Formal Fixx (see page 10).

11 9 Processing Reagents Processing Reagents & Supplies Histology Processing Reagents Shandon Xylene Clearing agent for processing, staining and coverslipping. A filtered, quality reagent. Color-coded bottle for Shandon Excelsior TM. Pkg/Qty Shandon Xylene 4 L x 1* Shandon Xylene 10 L x Shandon Xylene 209 L (55 gal.) Shandon Xylene Substitute A safer, more convenient alternative to xylene for processing, staining and coverslipping. Airborne exposure limit three times safer than xylene (TLV 300 ppm). Virtually odorless aliphatic hydrocarbon no citrus aroma. Not sensitizing to normal skin. Evaporation rate similar to xylene slides dry quickly. Greaseless. Can be recycled with solvent recyclers. Color-coded bottle for Shandon Excelsior. Pkg/Qty Shandon Xylene Substitute 4 L x 1* Shandon Xylene Substitute 4 L x Shandon Xylene Substitute 10 L x Shandon Xylene Substitute 19 L Shandon Xylene Substitute 209 L (55 Gal.) *Ready-to-use, color-coded Shandon Excelsior packaging. Shandon Reagent Alcohol Shandon Formal-Fixx TM Blend of 90%-absolute ethanol; 5%- methanol; 5%-isopropanol. A filtered, quality reagent. Use in place of absolute (100%) ethanol for most pathology procedures. No license required by Bureau of ATF. Color-coded bottle for Shandon Excelsior. Pkg/Qty Shandon Reagent Alcohol 4 L x 1* Shandon Reagent Alcohol 209 L (55 gal.) B % Neutral Buffered Formalin Phosphate-free, 10% neutral buffered formalin produces consistent results, and extends life of rotary valve. Store all specimens without excessive shrinking or hardening. Use for storage of all tissue eliminates presorting of EM specimens. Available premixed ready-to-use or in economical concentrate just add water or alcohol. Concentrate is not affected by freezing, reduces shelf space and is less expensive to ship. Prefilled, leak resistant cups are available. Cups are packed in sturdy trays for courier transport. Pkg/Qty Shandon Formal-Fixx 19 L x Ready-To-use 10 L x Shandon Formal-Fixx 20 ml Cups, filled To 10 ml, 180 / Cs Pre-filled Cups 60 ml Cups, filled To 30 ml, 125 / Cs ml Cups, filled To 45 ml, 125 / Cs ml Cups, filled To 60 ml, 125 / Cs Shandon Formal-Fixx 3.8 L x 1 (makes 19L) Concentrate (5x) 1L x 2* (makes 5L)

12 10 Shandon Glyo-Fixx TM Shandon Zinc Formal-Fixx TM Glyo-Fixx is a non-carcinogenic, non-sensitizing and environmentally friendly substitute for formalin. The active ingredient, glyoxal, is a di-aldehyde which has almost no vapor pressure. Convenient-uses the same protocols as with formalin. Glyo-Fixx does not have the unpleasant odor of formaldehyde. Results are superior to neutral buffered formalin, producing distinct and crisp cellular morphology. Does not cross-link as formaldehyde does. It fixes most antigens without impairing their immunoreactivity. With Glyo-Fixx, higher antibody dilutions can be used. Works well with conventional special stains including silver procedures, Schmorl s for reducing substances, PAS, Alcian blue, mucicarmine, Verheoff-Van Gieson for elastin, and trichrome. Allows special stain colors to be sharp without background staining. It also presents fine detail in specimen structure. Pkg/Qty Shandon Glyo-Fixx 3.8 L x Ready-to-use 19 L x Shandon Glyo-Fixx 20 ml Cups, filled To 10 ml, 180 / Cs Pre-filled Cups 60 ml Cups, filled To 30 ml, 125 / Cs ml Cups, filled To 45 ml, 125 / Cs ml Cups, filled To 60 ml, 125 / Cs Shandon Glyo-Fixx 3.8 L x 1 (makes 19L); Concentrate (5x) Shandon Rapid-Fixx TM Formalin Used in Rapid-Chrome TM Frozen Section Stain Kit ( ) for fixing slides from frozen sections. Excellent for antigenic preservation, avoids the need for enzyme digestion, and rapidly penetrates into tissue. Pkg/Qty Shandon Rapid-Fixx 1 L x Excellent for immunochemistry. The fixative of choice to enhance H&E's and special stains. Minimizes the need to enzyme digest; reduces protein crosslinking, producing well defined nuclear detail. Pkg/Qty Shandon Zinc Formal Fixx 19 L x Ready-to-use 10 L x Shandon Zinc Formal Fixx 3.8 L x 1 (makes 19 L) Concentrate (5x) 1 L x Wrench for 19 L Carboy B The In-Vitro Diagnostic Directive (see page 36 for complete details) To our customers in the European Union: The In-Vitro Diagnostics Directive (98/79/EC) (IVDD) was recently introduced in the EU as the third in a series of Medical Device Directives. It came into effect on December 7th As you know, a significant proportion of our product range is used in the histological and cytological preparation of human samples to aid in the efficient final diagnosis. For this reason, we feel very strongly that it is in the interests of our customers that the products used directly for the preparation of samples (including such products as tissue processors, cytocentrifuges, stainers, microtomes and cryotomes, and their accessories) should meet the IVDD. We are therefore pleased to announce that Thermo Electron can certify that all of our relevant Anatomical Pathology products meet the In Vitro Diagnostic Directive. As an ISO company, we are continually audited to make sure we comply with this International Quality Standard and are committed to deliver a product that has undergone a rigorous internal quality control process. Histology Processing Reagents & Supplies Processing Reagents

13 11 Histology Shandon TBD-1 TM Decalcifier Rapid hydrochloric acid decalcifier for processing bone marrow biopsies in as little as minutes. Thin pieces of dense bone process in 3-12 hours. Permits utilization of routine end point tests, such as calcium oxalate. Added ingredients protect cells from actions of acids. Pkg/Qty Shandon TBD-1 1 L x Shandon TBD-1 1 L x Shandon TBD-2 TM Decalcifier Formic acid decalcifier for gentle, longer term processing. Go up to 48 hours past end point without damaging specimens. Permits utilization of routine end point tests, such as calcium oxalate. Added ingredients protect cells from actions of acids. Pkg/Qty Shandon TBD-2 1 L x Shandon TBD-2 1 L x Processing Reagents & Supplies Paraffin Paraffin Paraplast Paraplast Paraplast Shandon Shandon Plus X-tra Precision Cut Histoplast Form Pellet Pellet Pellet Pellet Pellet Additives Plastic DMSO Microcrystalline Purified Paraffin Contains No Wax with Polymers Plastic Polymers Low polymer content for Special General Enhanced Thin improved infiltration, Use Purpose Infiltration Sectioning Embedding. General Purpose & Sectioning Good ribbon capability with longer blade life. Melting C 56 C C C C Point C C Packaging 2.2 lbs. / Bag x lbs. / Bag x lbs. / Bag x lbs. / Bag x 4 (1 kg x 8) (1 kg x 8) (1 kg x 8) (2.5 kg x 4) Order No B24209 B B lbs. / Bag (10 kg) 5.5 lbs. / Box (2.5 kg)

14 Cassettes and Capsules 12 Shandon Autopsy Cassette Designed for handling tissue through fixation, dehydration, clearing and infiltration processes. Polished stainless steel top and bottom are perforated to promote reagent circulation. Four-partition stainless steel separator is easily removed (sold separately). 3 Diameter x 0.5 Depth (76 x 13 mm). Pkg/Qty Shandon Autopsy Cassette Each 333 Separator Each Shandon Autopsy Tissue Capsules Shandon Tissue Processing Capsule Perforated throughout for free movement of fluids. Snap cap provides positive enclosure. Stainless steel (35 mm) Diameter. Available in sizes of 1.2 (30 mm) or 2.76 (70 mm) deep. Pkg/Qty Shandon Autopsy Tissue Capsules, 70 mm Each 332 Shandon Autopsy Tissue Capsules, 30 mm Each 342 Five sturdy lugs grasp the base securely. Stainless steel capsule can be partitioned up to 4 sections. Partition separators sold separately Diameter x 0.24 Depth (37 x 6 mm). Pkg/Qty Shandon Tissue Processing Capsule Each 330 Separators, S-shaped Each Separators, Z-shaped (not shown) Each Shandon General Purpose Capsule General purpose capsule for routine or small specimens. Precise enclosure. Extra fine bottom mesh. Stainless steel Diameter x 0.24 Depth (25 x 6 mm). Pkg/Qty Shandon General Purpose Capsule Each 350 Shandon Standard Cassette Stainless steel Diameter x Depth (40 x 7 mm). Expandable to 0.43 (11 mm) depth. Pkg/Qty Shandon Standard Cassette Each 339 Shandon Micro-Cassette Positive clip-on cover for micro specimen. All stainless steel. Available with fine or coarse mesh Diameter x Depth (20 x 5 mm). Pkg/Qty Shandon Micro-Cassette, Coarse Mesh Each 331 Shandon Micro-Cassette, Fine Mesh Each Histology Processing Reagents & Supplies Cassettes & Capsules

15 13 Biopsy Bags Histology Processing Reagents & Supplies Shandon Biopsy Bags Allow unrestricted fluid movement around tissue. Reduce risk of small specimen loss. Reduce reagent carry-over and pressure artifact often found with sponges. Peel-open bag conveniently exposes specimen for rapid removal. Acid Resistant Biopsy Bags feature all the benefits of nylon biopsy bags, plus offer acid-resistance for decalcification. Small Biopsy Bags measure 1.2 x 1.7 (31 x 43 mm) Medium Biopsy Bags measure 1.8 x 2.6 (45 x 65 mm) Large Biopsy Bags measure 3 x 3.5 (75 x 85 mm) Shandon Sponges Pkg/Qty Shandon Nylon Biopsy Bags, Small 200 / Pk Shandon Nylon Biopsy Bags, Small 500 / Pk Shandon Nylon Biopsy Bags, Small 1,000 / Pk Shandon Nylon Biopsy Bags, Medium 200 / Pk Shandon Nylon Biopsy Bags, Medium 500 / Pk Shandon Nylon Biopsy Bags, Medium 1,000 / Pk Shandon Nylon Biopsy Bags, Large 500 / Pk Shandon Acid-Resistant Biopsy Bags, Small 250 / Pk Shandon Acid-Resistant Biopsy Bags, Medium 250 / Pk Shandon Acid-Resistant Biopsy Bags, Large 250 / Pk Shandon Large Cassette Flexible snap cover easily attached and removed. Stainless steel L x 0.98 W X 0.47 D (50 mm x 25 mm x 12 mm). Pkg/Qty Shandon Large Cassette Each 349 Biopsy Bags Blue open-cell foam sponges hold specimen in cassette. Helps protect small biopsies from overprocessing Sponge fits Shandon General Purpose Capsule 350. See page Circle (25mm) Sponge fits Shandon Tissue Processing Capsule 330. See page Circle (31 mm) Sponge fits Disposable Cassettes. See pages x 1.2 (25 x 31 mm). Shandon Para-Release TM Spray Spray releasing agent. Apply to molds before adding paraffin for clean release of block. Pkg/Qty Shandon Sponge 25mm Circle 100 / Pk Shandon Sponge 31 mm Circle 100 / Pk Shandon Sponge 25 x 31 mm Rectangle 100 / Pk Pkg/Qty Shandon Para-Release Spray 50 ml x

16 Molds 14 Shandon Disposable Base Molds Peel-A-Way Disposable Embedding Molds Promotes rapid paraffin hardening. Made of rigid transparent plastic. Available in the following sizes (L x W x D): x x 0.2 (7 x 7 x 5 mm) 0.59 x 0.59 x 0.2 (15 x 15 x 5 mm) 0.95 x 0.95 x 0.2 (24 x 24 x 5 mm) 1.2 x 0.95 x 0.2 (30 x 24 x 5 mm) 1.46 x 0.95 x 0.2 (37 x 24 x 5 mm) Pkg/Qty Shandon Disp. Base Molds 7 x 7 x 5 mm 500 / Cs Shandon Disp. Base Molds 15 x 15 x 5 mm 500 / Cs Shandon Disp. Base Molds 24 x 24 x 5 mm 500 / Cs Shandon Disp. Base Molds 30 x 24 x 5 mm 500 / Cs Shandon Disp. Base Molds 37 x 24 x 5 mm 500 / Cs Shandon Stainless Steel Base Molds High-quality, durable mold. Sizes fit most cassettes. Superior thermal exchange. Rounded corners. Available in the following sizes (L x W x D): 0.4 x 0.4 x 0.2 (10 x 10 x 5 mm) 0.95 x 0.95 x 0.2 (24 x 24 x 5 mm) 1.2 x 0.95 x 0.35 (30 x 24 x 9 mm) 1.46 x 0.95 x 0.35 (37 x 24 x 9 mm) Promotes rapid paraffin hardening. Made of rigid transparent plastic. Available in the following sizes (L x W x D): 0.31 x 0.31 x 0.79 (8 x 8 x 20 mm) 0.47 x 0.47 x 0.79 (12 x 12 x 20 mm) 0.87 x 0.87 x 0.79 (22 x 22 x 20 mm) 1.2 x 0.87 x 0.79 (30 x 22 x 20 mm) 1.58 x 0.87 x 0.79 (40 x 22 x 20 mm) Pkg/Qty Peel-A-Away Molds 8 x 8 x 20 mm 288 / Cs Peel-A-Away Molds 12 x 12 x 20 mm 288 / Cs Peel-A-Away Molds 22 x 22 x 20 mm 288 / Cs Peel-A-Away Molds 30 x 22 x 20 mm 288 / Cs Peel-A-Away Molds 40 x 22 x 20 mm 264 / Cs Shandon Embedding Blocks Precisely cut from hard fiber. Available in the following sizes (L x W x D): 1 x 1 x 0.75 (25 x 25 x 19 mm) 1.5 x 1.5 x 1 (38 x 38 x 25 mm) Pkg/Qty Shandon Embedding Blocks 25 x 25 x 19 mm Each 8042 Shandon Embedding Blocks 38 x 38 x 25 mm Each 8043 Histology Processing Reagents & Supplies Molds Pkg/Qty Shandon SS Base Molds 10 x 10 x 5 mm 10 / Pk Shandon SS Base Molds 24 x 24 x 5 mm 10 / Pk Shandon SS Base Molds 30 x 24 x 9 mm 10 / Pk Shandon SS Base Molds 37 x 24 x 9 mm 10 / Pk

17 15 Shandon Histocentre 3 Embedding Center Two-piece modular embedding system. Histology The Shandon Histocentre 3 is an integral part of the workflow in Histology laboratories, representing a workstation that complements any automatic tissue processor. Simplicity Modularity Capacity Embedding Systems Shandon Histocentre 3 Easy to operate. Touch screen display. Front control panel settings. Preset timers for automatic power-up. Features Embedding Module Smart-timer digital control has the unit at temperature and ready for use when you arrive at work. At the end of the day, the unit turns itself off. Auto-on light setting. When paraffin is dispensed, the light automatically illuminates, when embedding is finished, the light automatically shuts off. Low profile 3.375" high (8.6 cm) working surface. Easy-to-use touch screen display allows you to adjust settings or view temperatures quickly. Thermoelectrically cooled Cold Spot aids specimen orientation. Fast melting 5-liter capacity paraffin tank. Gravity feed, paraffin-on-demand dispensing system Designed as a 2-piece system embedding center and cold plate. Able to add additional cold plate. Right or left hand operation. Large tissue storage tank with removable lid. Able to hold: 6 Shandon Pathcentre baskets. 8 Shandon Excelsior baskets. 2 Shandon Hypercenter baskets and all competitors baskets. Hot spot illumination provided by a single 10 watt Halogen lamp with 5 brightness settings. Forceps holder for right or left hand operation. Simple, clean disposal of waste wax through a valve and hose. Easy-to-drain tissue storage tank reduces the possibility of specimen contamination and makes cleaning easy. Easy wipe-clean surfaces which interface evenly with the cold plate module(s). Insulated front wrist support edge. Five liter paraffin tank. Mold storage area holds 200 molds. Cold plate holds 72 standard molds. Extra large cassette holding area holds 6 Shandon Pathcentre baskets or 2 Shandon Hypercenter baskets or 8 Shandon Excelsior baskets. Built-in power supply for electricallyheated forceps. Standard magnifying glass. Fully adjustable paraffin dispense flow rate. Cool-touch tamping tool in two sizes. Tamping tool positions and flattens specimen. Comes with a heatresistant handle.

18 16 Shandon Histocentre 3 Specifications Cold Plate Module Low profile high (8.6 cm) working surface. Large cold surface accommodates approximately 72 standard 2" x 1.5" (5 cm x 3.8 cm) base molds. Cold plate factory pre-set temperature of -12 C. Quiet (less than 65dB) refrigeration system. Takes less than 30 minutes to achieve temperature. Easy wipe-clean top to avoid wax build-up. Insulated front wrist support edge. Maintains temperature within ±5 C while loading 3 cassettes/min. Options Additional cold plate. Combination magnifying glass/lamp system. Heated forceps. Shandon Histocentre 3 Embedding Center U.K. Power Cord V, 50/60 Hz B Shandon Histocentre 3 Embedding Center U.S. Power Cord V, 50/60 Hz B Shandon Histocentre 3 Embedding Center European Power Cord V, 50/60 Hz B Shandon Histocentre 3 Embedding Center Japanese Power Cord V, 50/60 Hz B Shandon Histocentre 3 Embedding Module No Power Cord Incl V, 50/60 Hz B Shandon Histocentre 3 Cold Plate No Power Cord Incl V, 50/60 Hz B Shandon Histocentre 3 Cold Plate No Power Cord Incl V, 50/60 Hz B Shandon Histocentre 3 Cold Plate No Power Cord Incl V, 50/60 Hz B Embedding Module Specifications Dimensions (H x L x W) 12.5 x 23 x 25.1 (31.75 x 58.4 x 63.8 cm) Working Height: (8.6 cm) Weight 55 lbs. (33 kg) Power Requirements 100V or 110V or 230V, 50/60 Hz Tissue Compartment Specifications Dimensions (H x L x W) 3.63 x x (9.2 x 28.6 x cm) Cold Plate Specifications Dimensions (H x L x W) 12.5 x 23 x 16 (31.75 x 58.4 x 40.6 cm) Working Height: (8.6 cm) Working Surface: 14 x 16 (40.6 x 35.6 cm) Weight 42 lbs. (19 kg) Temperatures Cold Plate: Hot Plate: Tissue Storage: Mold Storage: Paraffin Tank: Cold Spot: -12 C, ±5 C C, ±3 C C, ±3 C C, ±3 C C, ±2 C 5 C, ±5 22 C Included with Product* Standard Magnifier B Foot Pedal B Paraffin Filter B Drain Hose B Tamper, 3/4 Square B Tamper, 1/2 Square B Scraper B Operator Manual (specify language) B Leveling Wrench B * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Magnifier with Light Forceps, Red, 1 mm Tip Forceps, Yellow, 2 mm Tip Forceps, Blue, 4 mm Tip B B B B Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark. Histology Embedding Systems Histocentre 3

19 17 Embedding Accessories Shandon PARA TRIMMER Shandon Wax Dispenser Histology The Shandon PARA TRIMMER is designed to remove excess wax from the outside of a tissue cassette after embedding by sliding the outside of the block across the heated surface. Embedding Supplies Paraffin should be removed to properly seat the block in the quickrelease clamp or vise to achieve the best section quality from your microtome. Heated surface with ridges. Multiple blocks may be passed across the surface at one time. Patented, compact, dual voltage unit. Shandon PARA TRIMMER V, 50/60Hz B Physical Specifications Dimensions (H x W x D) 6.75 x 5.25 x (17.2 x 18.5 x 13.3 cm) Weight 2 lbs. (1 kg) Power Requirements V 50/60Hz (120VA) Holds up to 5 liters of molten wax at a thermostatically controlled temperature. Separate tap heater ensures an even flow of wax. Convenient as a stand-alone or auxiliary source of molten wax. Stainless steel outer casing and lid. Aluminum inner reservoir for good thermal conductivity and improved temperature control. Non-drip lever tap controls wax delivery and can be locked in the open position if required. Reservoir filter screen prevents coarse particles from blocking the delivery tap. Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark. Shandon Wax Dispenser V, 50/60Hz V, 50/60Hz Accessories See Shandon Paraffin on page 11. Physical Specifications Dimensions (H x W x D) Diameter: 8.46 x Height: 16.1 (21.5 x 41 cm) Weight 8 lbs. (3.7 kg) Power Requirements V or V, 50/60 Hz, 250 Watts AC Temperature Range C, ±2 C Included with Product* Operator Manual * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark.

20 18 Shandon Paraffin Section Flotation Bath Shandon Circular Paraffin Section Flotation Bath Holds water at a constant temperature to flatten wax or resin sections prior to lifting them onto a microscope slide. Also used for hot staining except with corrosive substances. The top rim of the unit has generous space for drying slides. Controls have been recessed to provide the user with an added measure of safety. A drop-on stainless steel lid is provided to cover the bowl when not in use. Deep tapered bowl is made from stainless steel to offer maximum resistance against corrosion. Both the bowl and the upper casing have a matte-black PTFE coating providing visual contrast against wax sections. Lower steel casing has a resistant epoxy coating. Power cable has molded connections at both terminals. Power inlet socket at the back of the unit has fuses on both the negative and positive lines for optimum protection. Shandon Paraffin Section V 50/60Hz Flotation Bath V 50/60Hz Physical Specifications Dimensions (H x W x D) External: 4.2 x 10.8 x 12.8 (10.7 x 27.5 x 32.5 cm) Bowl: 8.7 Dia. x 3.34 Deep (22.2 x 8.5 cm) Weight 8.26 lbs. (3.75 kg) Temperature Range 30º - 65ºC (± 1.5º) at 20ºC ambient Power Requirements V or V, 50/60Hz, 250 VA Included with Product* Operator Manual * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Compact unit keeps water at a constant temperature to flatten wax or resin sections prior to lifting them onto a microscope slide. It may also be used for hot staining except with corrosive substances. The bath is made from aluminum with an anodized matte-black finish. It has a wide rim with ample space for slide drying. The power cable has molded connections at both terminals. The power inlet socket at the back of the unit has fuses on both the negative and positive lines for optimum protection. Shandon Circular Paraffin V 50/60Hz Section Flotation Bath V 50/60Hz Physical Specifications Dimensions (H x W x D) External: 12.5 Dia. x 6.26 Deep (32 x 15.9 cm) Bowl: 8.66 Dia. x 2.95 Deep (22 x 7.5 cm) Weight 5.5 lbs. (2.5 kg) Temperature Range 30º - 70ºC (± 1.5º) at 20ºC ambient Power Requirements V or V, 50/60Hz, 250 VA Included with Product* Operator Manual * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Agency Approvals CE Mark. Histology Embedding Supplies Flotation Baths Agency Approvals CE Mark.

21 19 Shandon Finesse ME Motorized electronic microtome. Shandon Finesse ME Motorized Electronic Specifications Histology Microtomes Shandon Finesse ME Choose set-ups for standard wax or resin sectioning. Display monitors a range of functions including cutting speed, section count, section thickness and advance distance. Arrow keys control specimen advance and rewind. Selectable retraction feature. Instantly switch between TRIM and SECTION settings. Independently selectable trim and section speeds. AUTOLOAD option automatically resets specimen head to a ready position for quickly changing blocks on high-throughput projects. ROCK option: specimen head advances by a set amount to trim small specimens without turning the handwheel through full turns. Standby Key allows the unit to go into sleep mode which saves the customized parameters in memory. User selected CUTTING SECTOR control maximizes throughput by allowing the return stroke to be faster than the optimized cutting stroke. 3 cutting modes include continuous cutting. Choose from 11 languages for viewing commands. Emergency Stop immediately cuts power to the motor. Shandon Finesse ME V, 50/60Hz V, 50/60Hz A low voltage kit is available separately. See below. Physical Specifications Dimensions (H x W x D) 13 x 19 x 23 (33 x 48 x 59 cm) *Dimensions include Width with handle up and Depth with connectors at rear. Weight 88 lbs. (40 kg) Power Requirements 150VA Shandon Finesse ME Features Total Specimen Advance 35 mm Cutting Stroke 65 mm Maximum Advance Speed 2,400 µm / s Section Thickness Range µm Trim Thickness Range µm Retraction Range µm Section Counter Standard Distance Display Standard Multi-Lingual Display Standard Knife Angle Position Locator Standard Specimen Orientation Light Standard Included with Product* Fine Orienting Head (see page 28) Standard Quick Release Specimen Clamp (see page 27) 0303 Operator Manual (specify language) Top Organizer Tray Debris Tray Dust Cover P13912 Footswitch Service Record Book A Specify Knife Holder at the time of order. NOT INCLUDED WITH MICROTOME. See page * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Service Manual Organizer Cold Trays Ice-Cooled Trays Dry-Cooled Trays Low Voltage Adapter Kit Specify at time of order. Must be installed by a qualified technician. SEE ALSO PAGE 34. Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant).

22 Shandon Finesse E Electronic microtome. 20 Shandon Finesse E Electronic Specifications The Shandon Finesse E is a precision rotary microtome that provides automated specimen advance with manual cutting. The precision-response, light, balanced flywheel is easy to operate. Coarse Advance Wheel allows the user the option of manually advancing the block to the knife edge. Display monitors a range of functions including cutting speed, section count, section thickness and advance distance. Selectable retraction feature. Instantly switch between TRIM and SECTION settings. Debris Tray is deep and removable for easy cleaning. AUTOLOAD option automatically resets specimen head to a ready position for quickly changing blocks on high-throughput projects. Knife Locking Pin secures the blade holder to the fixed knife stage. Emergency Stop immediately cuts power to the motor. Shandon Para-Tray Stainless steel tray collects paraffin shavings. Measures 11 L x 6 D x 1.25 H (28.6 x 15.2 x 3.2 cm). Shandon Finesse E V, 50/60Hz V, 50/60Hz A low voltage kit is available separately. See below. Physical Specifications Dimensions (H x W x D) 13 x 19 x 23 (33 x 48 x 59 cm) *Dimensions include Width with handle up and Depth with connectors at rear. Weight 88 lbs. (40 kg) Power Requirements 150VA Shandon Finesse E Features Total Specimen Advance 35 mm Cutting Stroke 65 mm Maximum Advance Speed 2,400 µm / s Section Thickness Range µm Trim Thickness Range µm Retraction Range µm Section Counter Standard Distance Display Standard Multi-Lingual Display Standard Knife Angle Position Locator Standard Specimen Orientation Light Standard Included with Product* Fine Orienting Head (see page 28) Standard Quick Release Specimen Clamp (see page 27) 0303 Operator Manual (specify language) Top Organizer Tray Debris Tray Dust Cover P13912 Service Record Book A Specify Knife Holder at the time of order. NOT INCLUDED WITH MICROTOME. See pages * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Service Manual Organizer Cold Trays Ice-Cooled Trays Dry-Cooled Trays Low Voltage Adapter Kit Specify at time of order. Must be installed by a qualified technician. SEE ALSO PAGE 34. Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Histology Microtomes Shandon Finesse E Pkg/Qty Shandon Para-Tray Each 58

23 21 Shandon Finesse 325 Manual rotary microtome. Shandon Finesse 325 Manual Rotary Specifications Shandon Finesse 325 Physical A Histology Specifications Dimensions (H x W x D) 11.4 x 16.1 x 19.7 (29 x 41 x 50 cm) Weight 88 lbs. (40 kg) Shandon Finesse 325 Features Accu-Feed specimen advance is selectable in 1 micron steps from 1 to 30 microns. Specimen tilt / orientation is ±5 degrees using X-Y micro adjustment. Microtomes Shandon Finesse 325 The Shandon Finesse 325 is a manual rotary microtome for routine paraffin sectioning. It has a lightly balanced flywheel designed to address repetitive stress injury. The Shandon Finesse 325 includes an integral debris tray, organizer storage tray and a resettable section counter. The retraction feature is standard and may be disengaged at the user s request. The unit is supplied with a quick release cassette clamp and x-y orientation head as standard. Disposable blades or standard microtome knives may be used with this unit, using the appropriate knife holder. Modern Accu-Feed System provides high quality reproducible sections throughout the length of specimen travel (see opposite page). Removable deep debris tray for ease of cleaning. Removable organizer tray located at the top of the unit for cassette organization. Precision response, free-running flywheel with ergonomic design. Brake may be activated at any position of the flywheel. Retraction may be disengaged at the user s discretion. Supplied with orientation head, quick-release clamp, microtome oil, dust cover, and operator s manual. See Shandon Disposable Microtome Blades on pages Included with Product* Fine Orienting Head Standard Quick Release Specimen Clamp (see page 27) 0303 Audible and visual specimen travel alarm/indicator. Standard Organizer Tray A Debris Tray A Dust Cover AP14325 Microtome Oil 1520/1 Operator Manual (specify language) A Service Record Book A Specify Knife Holder at the time of order. NOT INCLUDED WITH MICROTOME. See pages * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Service Manual A Specimen holders, quick-release cassette holders, and vises as options. See page 23. A full range of knife holders, for solid knives and disposable blades, all with built-in blade guards for safety. See Pages SEE ALSO PAGE 34. Agency Approvals CE Mark (IVDD compliant). Shandon Anti-Static Spray Neutralizes and inhibits accumulation of static electricity. Use to spray the sectioning area between the microtome knife and the embedded tissue block. Available in 16 oz. (450 ml) spray. Pkg/Qty Shandon Anti-Static Spray Each 259

24 Shandon Finesse 315* Low-cost, precision microtome. *AVAILABLE OUTSIDE NORTH AMERICA ONLY. 22 Shandon Finesse 315 Manual Rotary Specifications Shandon Finesse 315 Physical A The Shandon Finesse 315 low-cost precision microtome is ergonomically designed to consistently produce high quality routine paraffin sections without user strain or fatigue. Modern Accu-Feed System provides high quality reproducible sections throughout the length of specimen travel. Supplied complete with a simple knife holder, steel knife, vise, and fixed head. Visual indicator of specimen advance. Knife guards are fitted for user safety. Accu-Feed System The handwheel is turned to move the specimen up and down. Specimen Knife Knife Carriage Leadscrew driven by ratchet wheel. The specimen has been moved to the knife and is still totally stable and fully supported. Parallel Supports Specimen travels towards and away from the knife on parallel supports. Lever Arm Lever Arm pivots here at B. Leadscrew drives trunnion nut C in direction of arrow. The lever arm pivots at B and pushes the specimen support forward at A to move the specimen towards the knife. Specifications Dimensions (H x W x D) 11.4 x 16.1 x 19.7 (29 x 41 x 50 cm) Weight 88 lbs. (40 kg) Shandon Finesse 315 Features Accu-Feed specimen advance is selectable in 1 micron steps from 1 to 30 microns. Coarse specimen advance is 200 microns per revolution. Total specimen advance is 18 mm. Included with Product* Fixed Orientation Head Vise 50 x 45mm 0201 Debris Tray A Microtome Oil 1520/1 Basic Knifeholder A Solid Knife 120mm AP14316 Operator Manual (specify language) A Service Record Book A * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Service Manual A Orientation Head Specimen holders, quick-release cassette holders, and vises as options. A full range of knife holders, for solid knives and disposable blades, all with built-in blade guards for safety. See Pages SEE ALSO PAGE 34. Agency Approvals CE Mark (IVDD compliant). The modern design incorporates the unique Shandon Accu-Feed System which provides support throughout the full length of the specimen travel. This ensures high quality and reproducible sections. Shandon Camel Hair Brush Epoxy painted wood handle with a total length of 7.5 (19.1 cm). #4 brush size. Histology Microtomes Shandon Finesse 315 Pkg/Qty Shandon Camel Hair Brush 12 / Pk. 1910

25 23 Microtome Blade and Knife Holders Histology Disposable Blade Holder For Shandon Finesse ME and E only. Synergistic design gives superior blade stability while sectioning to eliminate vibration and chatter. Blade guard flips up to cover edge of blade when changing blocks. Includes knife angle memory position indicator. Wide Clamp Plate Disposable Blade Holder For use on the Shandon Finesse ME and E only. For cutting large specimens. For use with the 60 x 55 mm vise and Shandon Super Mega Cassettes. Microtomy Accessories Disposable Blade Holder, Low Profile A High Profile A Triangular Glass Knife Holder For Shandon Finesse ME and E only. Triangular Glass Knife Holder Wide Clamp Plate Disposable Blade Holder With insert to accommodate both High and Low Profile Blades. Solid Knife Holder For Shandon Finesse ME and E only. Accepts commonly used knives. Knife guard covers unused part of blade edge. Knife guard can be closed to fully cover entire blade edge. Includes knife angle memory position indicator. Ralph Glass Knife Holder Solid Knife Holder Blade and Knife Holders For Shandon Finesse ME and E only. Ralph Glass Knife Holder (38 mm); includes 1 (25 mm) insert. Stainless Steel Disposable Blade Holder All stainless steel construction. Holds most standard high- and low-profile blades. Fits most standard microtomes and cryostats. Stainless Steel Disposable Blade Holder, 6.7 (170 mm) 40

26 24 Universal Blade Holder High-Profile Blade Holder For Shandon Finesse 325 and 315 only. Accepts standard C or D profile knife up to 185 mm. May be used with standard steel knives or with disposable blade holder No. 40 or 47 (see page 23-24). Universal Blade Holder 0318 Base and Top Stage Low-Profile Blade Holder For Shandon Finesse 325 and 315 only. Use with low-profile disposable blades. Low Profile Blade Holder 0321 Base and Top Stage Shandon Standard High Profile Disposable Blades Pkg/Qty Shandon Standard High Profile 100 / Pk. x 5 49 For Shandon Finesse 325 and 315 only. Accepts standard and heavy-duty high profile blades. Provides a wide range of tissue sectioning. High Profile Blade Holder 0322 Base and Top Stage Spring-Loaded Disposable Blade Holder Spring-loaded clamp enables easy knife changes. Shaped like standard microtome knife to fit most standard microtomes and cryostats. Holds most heavy-duty blades, including the Shandon Premium Heavy-Duty blades (see below). Spring-Loaded Disposable Blade Holder, 5.1 (130 mm) 47 Shandon Premium High Profile Disposable Blades Pkg/Qty Shandon Premium High Profile 50 / Pk Shandon Premium High Profile with PTFE 50 / Pk Shandon Premium Heavy-Duty High Profile 30 / Pk Histology Microtomy Accessories Blade and Knife Holders

27 25 Disposable Blades Shandon MX35 Premier+ Low Profile Disposable Blades Shandon MX35 Premier Low Profile Disposable Blades Histology Microtomy Supplies Disposable Blades Sharper edge with increased durability for longer blade life. Provides superb performance for sectioning hard tissues and high-quality thin sections. Tests show 10-20% increase in blade life. 80 x 8 x 0.25 mm 30 Cutting Angle Pkg/Qty Shandon MX-35 Premier+ Low Profile 50 / Pk Shandon MB22 Premier Low Profile Disposable Blades Outstanding for applications where extremely thin, high-quality sections are required such as renal biopsies and lymph nodes. 80 x 8 x 0.25 mm 22 Cutting Angle Pkg/Qty Shandon MB-22 Premier Low Profile 50 / Pk Shandon HP35 Coated High Profile Disposable Blades Routine applications with a high proportion of harder tissue. Increased durability with easier ribbonning. 75 x 14 x 0.31 mm 35 Cutting Angle Pkg/Qty Shandon HP-35 Coated High Profile 50 / Pk Excellent for routine applications with a high proportion of harder tissue. Increased durability. 80 x 8 x 0.25 mm 35 Cutting Angle Pkg/Qty Shandon MX-35 Premier Low Profile 50 / Pk Shandon MB35 Premier Low Profile Disposable Blades Best for routine sectioning applications. Has consistent edge sharpness for high quality thin sections. Superior edge stability. 80 x 8 x 0.25 mm 35 Cutting Angle Pkg/Qty Shandon MB-35 Premier Low Profile 50 / Pk Shandon HP35n Non-Coated High Profile Disposable Blades Routine applications with a high proportion of harder tissue. Increased durability. 75 x 14 x 0.31 mm 35 Cutting Angle Pkg/Qty Shandon HP-35n High Profile 50 / Pk

28 Microtome Knives 26 Stainless Steel Microtome Knives Tungsten Carbide D-Profile Microtome Knives Round-back design is ideal for cryostats. Replaces carbon steel wherever moisture is a problem to prevent minute oxidation which may occur on ordinary microtome knife edges. Resists corrosive action. Hardened throughout to the exact temper for the best quality in edge efficiency, and tested for hardness. Pkg/Qty Stainless Steel Microtome Knife Each 7619 Round-back, Blade Length: 125 mm Stainless Steel Microtome Knife Each 7719 Round-back, Blade Length: 185 mm Standard Microtome Knives Superior quality surgical steel is thoroughly tempered and individually tested for hardness. Round back design is precisely balanced and shaped. Pkg/Qty Standard Microtome Knife Each 7702 Round Back, Blade Length: 125 mm Stainless Steel Back Each For 125 mm Standard Microtome Knife 7702 Standard Microtome Knife Each 7703 Round Back, Blade Length: 185 mm Stainless Steel Back Each For 185 mm Standard Microtome Knife 7703 Standard Microtome Knife Each 7704 Round Back, Blade Length: 250 mm Stainless Steel Back Each For 250 mm Standard Microtome Knife 7704 Microtome Lubricating Oil Available in 4 oz. (118 ml) bottle. Not for use with Shandon Finesse Series microtomes. Not for use with cryostats. Pkg/Qty Shandon Microtome Lubricating Oil Each 288 D-profile has tungsten carbide tip for extra strength and support to the cutting edge. Excellent for sectioning resins and un-decalcified bone. Pkg/Qty D-Profile Microtome Knife Each Tungsten Carbide Tip, Blade Length: 160 mm Shandon Microtome Knives Precision ground for outstanding sectioning and extended cutting life; flat-back design. Assured performance through multiple tests. All Shandon C-profile and D-profile knives are drilled and tapped in the base for direct attachment to holders for sharpening. Four lengths of C-profile knives: 120 mm, 160 mm, 185 mm and 240 mm. Two lengths of D-profile knives: 160 mm and 240 mm. Pkg/Qty Shandon C-Profile Microtome Knife Each Flat-back, Blade Length: 120 mm Shandon C-Profile Microtome Knife Each Flat-back, Blade Length: 185 mm Shandon C-Profile Microtome Knife Each Flat-back, 160 x 34 x 10 mm Shandon C-Profile Microtome Knife Each Flat-back, 240 x 33 x 13 mm Shandon D-Profile Microtome Knife Each Flat-back, 240 x 33 x 14 mm Shandon D-Profile Microtome Knife Each Flat-back, 160 x 34 x 10 mm Shandon Lubricating Jelly Light Grease Available in 2 oz. (60 g) jar. Pkg/Qty Shandon Lubricating Jelly Each 294 Histology Microtomy Supplies Microtome Knives

29 27 Microtome Accessories Histology 60 x 55 mm Vise ( ) Max Open: 55 Shandon Finesse ME and E only Fits Knife Holders or x 45 mm Vise (0201) Max Open: 45 Min Open: x 30 mm Vise (0214) Max Open: 30 Min Open: x 30 mm Vise (0313) Max Open: 30 Min Open: 16 Standard Quick Release Clamp + (0303) + Included with Unit Microtomy Accessories 10 mm Spacer Bar (0215) Large V Spacer (0216) JB4 Resin Clamp ( ) Small V Spacer (0220) Thin Foil Specimen Holder (0223) EBH-2 Resin Clamp (A ) Vises and Clamps 10 mm Spacer Bar 10 x 50 mm 0215 V Spacer, Large Fits 0201 and Small Fits 0201 and Thin Foil Specimen Holder Fits 0214 and JB4 Resin Clamp Fits EBH-2 Resin Clamp Fits 0201 A Vise Accessories sold separately. Not included with microtome. Standard Quick Release Specimen Clamp Vise 60 x 55 mm (Finesse ME and E Only) Standard Vise 50 x 45 mm x 30 mm x 30 mm Item 0303 is included with all microtomes (EXCEPT Shandon Finesse 315).

30 28 Shandon Fine Orienting Head For Shandon Finesse ME and E only. The Shandon Fine Orienting Head allows x-y orientation of the specimen. Included with the Shandon Finesse ME and E model microtomes only. Shandon Fine Orienting Head Shandon Microtome Knife Guard Provides safe cutting area for technologists. Federal safety red PVC protector fits any microtome knife. Protector is designed to permit knife blade clearance and to avoid damage to microtome knife edge. Pkg/Qty Shandon Microtome Knife Edge Guard, 6 / Pk. 561 Narrow, 1 x 1.5 (25 x 38 mm) Shandon Microtome Knife Edge Guard, 6 / Pk. 562 Wide, 1.5 x 1.5 (38 x 38 mm) Shandon Microtome Magnetic Knife Edge Guard Heavy-gauge, polished stainless steel protector fits any microtome knife. Interior fitted with sponge rubber to protect the microtome knife edge. Magnet fitted to front section holds the protector securely in place. Pkg/Qty Shandon Magnetic Knife Edge Guard Each 57 1 x 2 (25 x 51 mm) Shandon Fixed Orienting Head For Shandon Finesse ME and E only. The Fixed Orienting Head provides rigid support when sectioning hard tissues and resins. Sold separately for use with the Shandon Finesse ME and E model microtomes only. Shandon Fixed Orienting Head Cold Point Light Source Directs two powerful beams of light to the specimen. Fiber optic lights do not affect specimen temperature. Gooseneck shafts provide maximum flexibility. Cold Point Light Source 110V V Euro Version V U.K. Version Shandon Stropping Handle Use to manually sharpen Shandon microtome knives. Screw-on handle to assist in stropping. Pkg/Qty Shandon Universal Stropping Handle Each 707 for Microtome Knives Histology Microtomy Accessories Knife Accessories

31 29 Shandon Cryotome Cryostat Series Featuring 3 models ranging from totally manual to fully automated. Microtome Features Accessories Microtome is housed outside the cryochamber for easy cleaning and maintenance. Select from universal knife holder, high-profile disposable blade holder or low-profile disposable blade holder. Histology Precision microtome has a light, balanced feel over the complete travel range. Cryotome ME and E feature ACCU-FEED system with 25,000 µm advance that may be set at 1-20µm intervals in 1 µm increments and 20-60µm intervals at 5µm increments (not available on manual Cryotome models). Manual Cryotome Coarse Specimen Advance is 200 µm per revolution. High and low-profile blade holder includes an easy-to-use glass anti-roll plate. Universal blade holder includes a plastic anti-roll plate. Cryotome and Cryotome E come complete with quick-release clamp. Optional XY orientation head available on manual and semiautomated units. Cryostats Shandon Cryotome Series Spacious Cryochamber Tested to operate at temperatures as low as -35 C (at 20 C ambient). Operator controls microtome movement from outside of cryochamber. Open-top design minimizes temperature gain during prolonged use. Well-illuminated, stainless steel chamber. CFC-free refrigerant and foam insulation. Accessories in the cryochamber are removable for easy cleaning and disinfecting of the chamber. Automatic programmable defrost. Automatic programmable formaldehyde fumigation. Chuck adapter rotates 360 for specimen orientation. Basic Shandon Cryotome features 12,000 µm advance that may be set at 1-30µm intervals in 1 µm increments. Cryobar Peltier-controlled cold spot on the Cryobar aids quick-freezing to -60 C, reducing ice crystal artifact formation. Control Panel All models of the Shandon Cryotome cryostat series feature microprocessorbased touch-key controls with specimen travel graphic indicator, clear digital displays of cryochamber and cryobar temperatures. Safety Features formaldehyde fumigation for the cryochamber a method proven effective against tuberculosis and many other known pathogens. Fumigation and defrost may be activated instantly or programmed to delay. The cryochamber window automatically locks during formaldehyde fumigation. Waste fluids drain efficiently into easy-access collection jar. Positive locking flywheel with 3-position lock. Locking, frost-free window places a barrier between the operator and the specimen. Motorized model features an emergency stop button.

32 30 Shandon Cryotome is a manually operated cryostat ideal for routine sectioning. Shandon Cryotome E (Electronic) Features an automated, precise electronic specimen advance system. Shandon Cryotome SME (Special Motorized Electronic) Sophisticated, top of the line cryostat that combines automated electronic advance and hands-free sectioning with fully independent specimen temperature control. Shandon Cryotome Cryostat Series Specifications Shandon Cryotome V, 60Hz 0620/110 Shandon Cryotome V, 50Hz 0620 Shandon Cryotome E V, 60Hz 0620E/110 Shandon Cryotome E V, 50Hz 0620E Shandon Cryotome SME V, 60Hz Shandon Cryotome SME V, 50Hz German and French keyboards are available. Contact your sales representative for details. Physical Specifications Dimensions (H x W x D) 42.5 x 26 x 25.5 (107 x 66 x 64 cm) Weight 330 lbs. (150 kg) Power Requirements 1400VA ( Vac) 1700VA ( Vac) Included with Cryotome SME* Fine Adjust Orientation Head with Specimen Clamp Fitted Debris Tray Storage Shelf Shandon Cryocassette, 35 mm, 4 / Pk. (with handle) Shandon Cryocassette, variety pack ea. 10, 25, 25, 45 mm circular with 2 handles Footswitch Operator Manual (specify language) Service Record Book A *Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Shandon Cryocassette, 25mm circular, 4 / Pk. (with handle) See Page 31 Shandon Cryocassette, 45mm circular, 4 / Pk. (with handle) See Page 31 Shandon Cryocassette, 10mm circular, 4 / Pk. (with handle) See Page 31 Shandon MOHS Organizer Tray See Page 32 Shandon Low Profile Disposable Blade Holder See Page 32 Shandon High Profile Disposable Blade Holder See Page 32 Shandon Universal Blade Holder See Page 32 Replacement Handles for SME Cryocassettes Plastic Knife Guard A Glass Anti-Roll Plate Service Manual Shandon Camel Hair Brush Epoxy painted wood handle with a total length of 7.5 (19.1 cm). #4 brush size. Pkg/Qty Shandon Camel Hair Brush 12 / Pk Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Included with Cryotome and Cryotome E* Fixed Head Quick-Release Clamp Debris Tray Storage Shelf Shandon Cryocassette Variety Pack, 5/ Pk. See Page 31 Operator Manual (specify language) for Shandon Cryotome and Cryotome E Service Record Book A *Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Shandon Cryocassette, 25mm square, 5 / Pk. See Page 31 Shandon Cryocassette, 10mm Biopsy, 5 / Pk. See Page 31 Shandon Cryocassette, 28x40mm, 5 / Pk. See Page 31 Shandon Cryocassette 35mm square, 5 / Pk. See Page 31 Shandon Cryocassette, 45mm circular, 5 / Pk. See Page 31 Shandon Cryocassette, 35mm, circular, 5 / Pk. See Page 31 Shandon Cryocassette, 25mm, annular, 5 / Pk. See Page 31 Shandon Cryocassette, 25mm, square heavy duty, 5 / Pk. See Page 31 Shandon Simple Adjustment Orientation Head See Page 31 Shandon Fine XY Orientation Head See Page 31 Shandon MOHS Organizer Tray See Page 32 Shandon Low Profile Disposable Blade Holder See Page 32 Shandon High Profile Disposable Blade Holder See Page 32 Shandon Universal Blade Holder See Page 32 Service Manual Shandon Cryostat Lubricating Oil Available in 4 oz. (118 ml) bottle. Pkg/Qty Shandon Cryostat Lubricating Oil Each 291 Histology Cryostats Shandon Cryotome Series

33 31 Cryotome Accessories Histology Shandon Cryotome Orientation Heads Fixed Cryocassette Head Supplied with Unit unless otherwise specified. Fine XY Adjustment Orientation Head Simple Adjustment Orientation Head Shandon Cryocassette Holder Standard Quick-Release Cryocassette Holder Supplied with Unit unless otherwise specified. For use with Shandon Cryotome and Shandon Crytotome E only. Cryotomy Accessories Shandon Cryotome SME Cryocassettes Intended for use with the Shandon Cryotome SME only * Circular 45 mm 4 / Pk * Circular 25 mm 4 / Pk * Circular 10 mm 4 / Pk * Circular 35 mm 4 / Pk. * One each supplied in Variety Pack Shandon Cryocassettes NOTE: Shandon SME Cryotome has specimen holder components pre-mounted in cryochamber (cryocassette clamp, XY orienting head, and peltier). Shandon SME components are replaceable only through Thermo Electron Corp., Anatomical Pathology Service Department. Call for details. Shandon Plastic Knife Guard ** Annular 25 mm 5 / Pk Circular 35 mm, 5 / Pk ** Circular 45 mm 5 / Pk Heavy Duty 25 mm 5 / Pk. A Cryocassettes ** Rectangular 28 x 40 mm 5 / Pk ** Square 35 mm 5 / Pk Square 10 mm 5 / Pk ** Square 25 mm 5 / Pk. See Shandon Histobath on page 77. ** One each supplied in Variety Pack

34 Cryotome Blade Holders 32 Shandon Universal Blade Holder Shandon Low-Profile Blade Holder Shandon High-Profile Blade Holder Shandon MOHS Organizer Tray Accepts standard C or D profile knife up to 220 mm. (120 mm is standard length.) May be used with standard steel knives or with disposable blade holder. Use in conjunction with Disposable Blade Holders Part Nos. 40 or No. 47. See Pages 23 and 24. Shandon Universal Cryotome Blade Holder Use with low-profile disposable blades. See Page 25. Shandon Low Profile Cryotome Blade Holder L Base and Top Stage This holder will accept either standard or heavy-duty high-profile blades, providing a wide range of tissue sectioning. See Pages 24 and 25. Shandon High Profile Cryotome Blade Holder H Holds multiple cryocassettes for better organization of specimens. Fits all cryotomes. Measures 10.5 x 4.7 (26.6 x 11.9 cm). Histology Cryotomy Accessories Blade Holders Pkg/Qty Shandon Mohs Organizer Tray Each

35 33 Cryotomy Supplies Shandon Frozen Section Staining Kit Shandon Cryochrome Histology Cryotomy Supplies Cryotomy Staining Ideal for laboratories that process a limited number of slides. Works well for staining tissue mounted on coverglass. Kit includes 12 beakers, a stainless steel slide holder, a heavygauge stainless steel support rack with six round openings to hold beakers. Sturdy cover with piano hinge seals beakers to minimize evaporation. Rubber feet on rack protect table surface. Glass beakers have a capacity of 6.75 oz. (200 ml) and are 4 (100 mm) tall. Slide holder will hold ten 3 x 1 (76 x 26 mm) slides. Stainless steel support rack measures 0.85 x 1.9 x 0.89 (21.6 x 48.3 x 22.6 mm). Pkg/Qty Shandon Frozen Section Staining Kit Each 145 Glass Beakers Only 12 / Pk. 146 Slide Holder Only Each 147 Stainless Steel Support Rack Only Each Shandon Cryomatrix Outstanding embedding resin used to support tissue for frozen sectioning. Forms a firm bond with the specimen holder that secures and supports tissue. Removed during staining. Freezes quickly, sections smoothly, and dissolves in water without residue. Pkg/Qty Shandon Cryomatrix 4 / Pk Outstanding embedding resin used to support tissue for frozen sectioning. Color codes frozen sections for easy identification and tracking. Four colors available pink, blue, yellow, green. Formulated with physical characteristics identical to Shandon Cryomatrix. Shandon Cryochrome Kit includes Colorfrost slides to match Shandon Cryochrome colors. Pkg/Qty Shandon Cryochrome Kit Each each pink, blue, yellow, green 120 ml Bottle 100 of each pink, blue, yellow, green Colorfrost Slides. Shandon Cryochrome Compound Sampler 4 / Pk each pk, bl, yllw, grn 120 ml Bottle Shandon Cryochrome Compound 4 / Pk PINK, 120 ml Shandon Cryochrome Compound 4 / Pk BLUE, 120 ml Shandon Cryochrome Compound 4 / Pk YELLOW, 120 ml Shandon Cryochrome Compound 4 / Pk GREEN, 120 ml Shandon M-1 Embedding Matrix Particularly effective on specimens with high water content such as eyes and CNS. Water soluble, clear embedding matrix. Optimum sectioning temperature of -12 to -13 C. Pkg/Qty Shandon M-1 Embedding Matrix 180 ml x

36 34 Envi-Ro-Tech Freezer Spray Ozone-friendly freezing spray for use at the microtome and cryostat. Facilitates rapid freezing and consistent results. Attachable capillary nozzle enables spot freezing. Contains 1,1,1,2 Tetrafluoroethane. Pkg/Qty Shandon Envi-Ro-Tech Freezer Spray 6 / Cs Shandon Specimen Object Disks Chrome-plated discs are precisely machined to accurate dimensions. Available in the following sizes: 0.87 (22 mm) 1.15 (29 mm) 1.5 (38 mm) 2 (51 mm) All have straight shanks to fit many microtomes and cryostats Not for use on Shandon Cryotome series cryostats. Pkg/Qty Shandon Specimen Object Disk, 22 mm Each 8001 Shandon Specimen Object Disk, 29 mm Each 8002 Shandon Specimen Object Disk, 38 mm Each 8005 Shandon Specimen Object Disk, 51 mm Each 8004 Fluoroglide General purpose spray lubricant. Available in oz. (380 gm) spray can. Pkg/Qty Fluoroglide Each 267 Shandon Heat Extractor Speed freezing for surgical diagnosis using frozen sections. Provides freezing action in seconds. Planes the block surface parallel to knife edge to minimize trimming. Hand-held to permit use in all makes of cryotomes and cryostats. Stainless steel block is 1.2 (3 cm) diameter. Steel stem is 3 (7.6 cm) long and fitted with a plastic knob. Pkg/Qty Shandon Heat Extractor Each 2821 Shandon Trimming Blade Holder Aids specimen dissection and enables greater utilization of microtome blades. Easily snaps onto the end of a low-profile microtome blade to act as a secure handle for safer and more comfortable cutting. Mint green color also makes the sharp blade easy to spot on a laboratory dissection surface. Used with the Thermo Shandon MB22, MB35 or MX35 microtome blades. Blades may be changed, and the holder may be reused many times. Pkg/Qty Shandon Trimming Blade Holder 10 / Box B Histology Cryotomy Supplies Miscellaneous Supplies

37 35 Shandon Autosharp Automatic microtome knife sharpener. Shandon Autosharp Specifications Histology Microtomy Accessories Shandon Autosharp Patented Shandon Microsharp grinding surface and diamond compound sharpen all styles of blades, including tungsten-carbide, HK, and Polycut knives. Iron plates prepared with Microsharp Diamond Lapping Paste rotate on the Shandon Autosharp to produce high-quality blade edges. Unit stops when lid is opened. Adjustable turnover rate sharpens both sides of the knife. Facet angle indicator is an accurate reference for C-profile knives. Microsharp Lapping Plates may be reconditioned for years of use. Shandon Autosharp V, 60Hz V, 50/60 Hz Specifications Dimensions (H x W x D) 17 x 22.5 x 20.5 (43 x 52 x 57 cm) Clearance (78 cm) Weight 90 lbs. (46 kg) Power Requirements 150VA Included with Product* Microsharp Lapping Plates - 2 supplied Microsharp Lapping Paste (Yellow, Blue) See Page 36 Cleaning Fluid (8 oz. bottle) Lubricating Fluid (8 oz. bottle) Operator Manual P07349 * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Lapping Paste See page 36 Universal Holder for C-profile, Diamond, or Round-backed Knives Universal Holder for C-profile, Flat-backed Knives Universal Holder for D-profile, (Wedge) Knives Holder for HK-2 and HK-3 Knives Holder / 40 D-Profile Knife, Parallel Sides Knife Trade Name: Polycut 40 Holder/45 D-Profile Knife, Parallel Sides Knife Trade Name: LKB Holder/50 D-Profile Knife, Parallel Sides Knife Trade Name: Polycut 50 Holder/60 D-Profile Knife, Parallel Sides Knife Trade Name: Polycut 60 Screw Type Holder for Tapped D-Profile Knives Knife Trade Name: Shandon D-Profile Screw Type Holder for Tapped C-Profile Knives Knife Trade Name: Shandon C-Profile Shandon Drilled and Tapped Knives feature threaded holes on the bottom for easy connection to Autosharp holder. Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark.

38 The In-Vitro Diagnostic Directive 36 To our customers in the European Union: The In-Vitro Diagnostics Directive (98/79/EC) (IVDD) was recently introduced in the EU as the third in a series of Medical Device Directives. It came into force on December 7th The IVDD defines an in vitro diagnostic medical device as follows: in vitro diagnostic medical device means any medical device which is a reagent, reagent product, calibrator, control material, kit, instrument, apparatus, equipment, or system, whether used alone or in combination, intended by the manufacturer to be used in vitro for the examination of specimens, including blood and tissue donations, derived from the human body, solely or principally for the purpose of providing information: concerning a physiological or pathological state,or concerning a congenital abnormality, or to determine the safety and compatibility with potential recipients, or to monitor therapeutic measures. Specimen receptacles are considered to be in vitro diagnostic medical devices. Specimen receptacles are those devices, whether vacuum-type or not, specifically intended by their manufacturers for the primary containment and preservation of specimens derived from the human body for the purpose of in vitro diagnostic examination. As you know, a significant proportion of our product range is used in the histological and cytological preparation of human samples to aid in the efficient final diagnosis. For this reason, we feel very strongly that it is in the interests of our customers that the products used directly for the preparation of samples (including such products as tissue processors, cytocentrifuges, stainers, microtomes and cryotomes, and their accessories) should meet the IVDD. We are therefore pleased to announce that Thermo Electron can certify that all of our relevant Anatomical Pathology products meet the In Vitro Diagnostics Directive As an ISO company, we are continually audited to make sure we comply with this International Quality Standard and are committed to deliver a product that has undergone a rigorous internal quality control process. Shandon Diamond Lapping Pastes Microsharp Diamond Lapping Pastes are available from coarse, 30 µm, to fine, 1 µm. The range of pastes will sharpen even the dullest knives. Coarseness Order Numbe Shandon Lapping Paste, Blue 1 µm Shandon Lapping Paste, Green 3 µm Shandon Lapping Paste, Yellow 6 µm Shandon Lapping Paste, Red 8 µm Shandon Lapping Paste, Brown 15 µm Shandon Lapping Paste, Clay 30 µm Histology Microtomy Accessories Shandon Lapping Pastes

39 37 Shandon Varistain Gemini Automated slide stainer with multi-program capability. Histology Stainers Shandon Varistain Gemini Features Load multiple 20-slide baskets on the machine. Intuitive software makes it possible for the Shandon Varistain Gemini to perform separate protocols simultaneously with multiple baskets in process. Units available with or without five independently heated positions for drying slides. Units have 6 water stations, 26 reagent stations, and a total of 4 configurable doors for loading and unloading. Battery back-up provides 40 minutes of power. Powerful, Easy-to-Use Software With the touch of a single button, the software schedules runs, allocates reagents, optimizes the reagent plan and calculates the most efficient route for each protocol. Software graphically displays the progress of each basket along with a text summary on the unit s VGA monitor. Comes complete with suggested staining protocols which may be easily modified to the laboratory s procedures. Stores as many as 50 staining procedures in memory. Unique Design Ergonomic control panels, two loading doors and two unloading doors make the stainer convenient to operate. Two-level design saves bench space. Lower-level staining stations are on a turntable for easy access to all dishes from the front of the machine. Versatile Command Features Auto-allocation optimizes reagents and efficiently uses available staining stations by calculating the quickest throughput path with the shortest moves for each basket. Urgent Start gives the user the opportunity to prioritize urgent baskets ahead of those already in process. The unit s software allows this speed without compromise that is, both the slides in the rushed basket and the slides in the standard start baskets receive appropriate time in each reagent. Auto-return allows the user to recall any loaded basket. The user may select from three rates of agitation or no agitation at any station. The Shandon Varistain Gemini s passcode protection secures the operator s customized protocols. Quality Control Features Safety The power supply has a voltage range from V (±10%) and is strong enough to handle power fluctuations including surges, spikes, and brownouts. In the event of a power failure, the stainer s battery back-up provides 40 minutes of power. Handles fume control with an easy-tochange carbon filter or through connection to an optional external vent adapter kit. Water supply lines are protected by internal flow regulators and anti-siphon devices on the the water supply. Smart software keeps the unit s robotic arm from entering user access areas. Displays reagent usage and batch throughput. Procedures, reagent layout, and a complete event log may be recorded on a floppy disk or printed to an optional printer for quality control records.

40 38 Shandon Varistain Gemini Specifications Ingenious lockable baskets secure slides even upside down. Integrated 3-pot running water container. The user loads slides in clearly defined doors. The user may load baskets with just one hand. Autoreturn feature allows recall of any loaded basket. Shandon Varistain Gemini Automatic Slide Stainer without heat Dual Voltage; no monitor Shandon Varistain Gemini Automatic Slide Stainer without heat Dual Voltage; with monitor Shandon Varistain Gemini Automatic Slide Stainer with heat Dual Voltage; no monitor Shandon Varistain Gemini Automatic Slide Stainer with heat Dual Voltage; with monitor Physical Specifications Stainer Dimensions (H x W x D) 34.5 x 28.5 x 28 (88 x 72 x 71 cm) Stainer Weight 176 lbs. (80 kg) Sakura Basket Carrier. A A A A Included with Product* Charcoal filter Staining Basket and Carrier - 5 / Pk. (2 supplied) A Well Water Station (2 fitted) A Single Pot Cover - 6 / Pk. A Multi-Pot Cover - 4 / Pk. A Water Inlet Hose - 8 ft. (2.5 m) long AP14160 Cytology Stainer (without heat) - Stain Pots (35 supplied) Fitted Histology Stainer (with heat) - Stain Pots (30 supplied) Fitted Spare Staining Pots - 3 / Pk. A Monitor Cable AP14185 Screened Data Cable A Operator Manual (specify language) A Service Record Book A * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Charcoal filter - 6 / Pk Static Water wash station A Sakura Basket Carrier - 5 / Pk. A Vent Adapter Kit A Pot Insert (for manual coverslipping) - 3 / Pk. A Basket Adapter for large slides - 10 / Pk. (5 pair) A Monitor AP14172 Service Manual A Call for information on compatibility with other automatic coverslippers. Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Power Supply Dimensions (H x W x D) 5.7 x 14 x (14.5 x 35 x 46.3 cm) Power Supply Weight 22 lbs. (10 kg) Power Supply Power Requirements 300VA Histology Stainers Shandon Varistain Gemini

41 39 Shandon Varistain 24-4 Automatic slide stainer. Histology Stainers Shandon Varistain 24-4 Designed for single load, double load and continuous throughput. Stains 64 slides per basket, potentially (64 x 24) slides/run. One-piece, benchtop unit features user-specified water stations to match your routines. Stations hold 25.3 fl. oz. (750 ml) troughs which may be filled to 12 fl. oz. (355 ml) for 10-slide carriers. Agitation is available. Stores and runs either three 24-step programs or six 12-step programs. Precisely program your station times into the Shandon Varistain in minutes and seconds. Pass feature allows you to run two programs while utilizing the same reagents. Used in cytology, hematology and histology laboratories. Compact design conserves benchtop space. Turntable rotates for convenient access to stations at the rear of the unit. Gives consistent results run after run. For greater fume containment use the Shandon Hyperclean 2 Work Station with the Shandon Varistain Integrate the Shandon Varistain with the Shandon Consul Automatic Coverslipper for even greater time savings and efficiency. Compatible with most automatic coverslippers. Shandon Varistain 24-4K models are configured for continous operation. Shandon Varistain 24-4 Specifications Shandon Varistain V, 60Hz Sold in North and South America only. Shandon Varistain V, 50Hz Shandon Varistain 24-4K V, 60Hz Sold in North and South America only. Shandon Varistain 24-4K V, 50Hz Specifications Dimensions (H x W x D)* 20 (26 Raised) x 29 x 29 (51 [65 Raised] x 74 x 74 cm) Turntable Diameter 34 (86 cm) Weight 133 lbs. (60 kg) Power Requirements 50VA Included with Product* Vertical Slide Carrier (64 position) - 2 supplied Staining Troughs fl. oz. (750ml) - 24 supplied Water Wash Trough - 4 supplied Water Inlet and Outlet Hose ft. (3m) long Fitted Water Regulator (USA only) Operator Manual (specify language) V24-4K Instruction Sheet Service Record Book A * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Horizontal Slide Carrier (10 position) Rack for Sakura Coverslipper Service Manual Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Shandon Hyperclean 2 Hood on page 114.

42 Shandon Manual Staining Station 40 Shandon Manual Staining Station Specifications Shandon Manual Staining Station Specifications Dimensions (H x W x D)* 4.7 x 39.4 x 7.1 (12 x 100 x 18 cm) A Included with Product* 320 ml Staining Troughs - 14 with unit A Baskets & Carriers - 5 / Pk. A * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories 320 ml Staining Troughs - 3 / Pk. See Above. Reagent Trough Covers A Shandon Colorfrost Slides Available in a wide variety of colors to ease identification. Resistant to commonly used laboratory solvents mm thick with ground edges. Shandon Colorfrost Plus Slides Positively charged microscope slides give improved cellular adhesion. Electrostatically attracts tissue sections and cytology preparations, binding them to the slide. Eliminates the need for special adhesives or protein coatings. Ideal for special processes, frozen sections or special stains. Uses the same staining troughs and slide baskets as the Shandon Varistain Gemini. Best when used for low-volume procedures. Kit includes a steel support rack, a complete set of 14 staining troughs, and 5 slide baskets with carriers. Sturdy cover closes over troughs to minimize evaporation. Ingenious lockable baskets secure slides even upside down. Slide baskets hold 20 standard microscope slides. Troughs hold 11 fl. oz. (320ml) of reagent. Shandon Colormark Slides COLORMARK Slides are designed for the Shandon MicroWriter Slide Labeler. A contrasting color is printed on the back of the Colorfrost end so that patient or specimen information etched through the painted end on the front is clearly visible. These slides are also available with positively charged Colorfrost Plus adhesion coating for better specimen mounting. Histology Stainers Shandon Manual Stainer

43 41 Shandon Linear Stainers Dependable and economical way to automate staining. All use a conveyer system to prepare consistently stained slides. Histology Flexible Continuous feeding unit allows you to add/remove slides at any time at any position on the stainer. Uses your laboratory s standard reagents. Adjustable running water station may be added at many positions. Accommodates single width (125 ml) stain dishes or double width (250 ml) dishes. Control staining intensity by adjusting total immersion time, adding dishes or adjusting reagent concentration. Quick Throughput Provides consistent automated staining of 6 slides per minute. Each slide is in plain view throughout staining cycle. Finished slides end their cycle in a clearant tank to await coverslipping. Slide Holders Unique slide holders provide a forceps-like grip. Slide holders clip onto the constantspeed conveyer system and are automatically carried through each reagent. Color-coded slide holders allow you to quickly identify cases. No handling is required after the slide has been attached to the conveyer system. Simple and Reliable The unit has a minimum of moving parts and is simple to maintain. Compact shape allows for intelligent use of bench space. Connects to normal power supply, water and drain. Shandon Linistain SLS Linear Stainer Stainers Shandon Linear Stainers Shandon Linistain SLS V, 60Hz Shandon Linistain SLS V, 50Hz Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Included with Product* Single Station Staining Dishes Slide Clips See Available Accessories Rinse Water Tubing Kit Elevated Feet * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Double Station Staining Dishes - 5/Pk Single Station Staining Dishes - 10/Pk Slide Clips, Pink - 25 / Pk Slide Clips, White - 25 / Pk Slide Clips, Blue - 25 / Pk Slide Clips, Yellow - 25 / Pk Slide Clips, Green - 25 / Pk Anti-evaporation Lid (Single Station) Anti-evaporation Lid (Double Station) Anti-evaporation Lid (Triple Station) Stainless Steel Holding Tank Evaporation cover - 13" (33 cm) Evaporation cover - 18" (33 cm) B The 23-station (30 sec. each) Shandon Linistain SLS is an economical midsize linear stainer especially useful for cytology staining and other procedures that do not require heat. Water wash may be added at any station. Physical Specifications Dimensions (H x W x D) 6 x 43 x 6 (15.2 x x 15.2 cm) Clearance Height: 12 (30.5 cm) Weight 40 lbs. (18.1 kg) Power Requirements VAC, 60 Hz, Maximum 2.0A VAC, 50/60 Hz, Maximum 1.0A

44 Shandon Linistat Linear Stainer Shandon Linistat V, 60Hz B Shandon Linistat V, 50Hz B Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Included with Product* Single Station Staining Dishes Double Station Staining Dishes Slide Clips See Available Accessories Rinse Water Tubing Kit Elevated Feet Activated Charcoal Filter * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Shandon Linistain GLX Linear Stainer Shandon Linistain GLX V, 60Hz Shandon Linistain GLX V, 50Hz Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Included with Product* Single Station Staining Dishes Double Station Staining Dishes Slide Clips See Available Accessories Rinse Water Tubing Kit Elevated Feet - 4 high Activated Charcoal Filter * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Double Station Staining Dishes - 5/Pk Single Station Staining Dishes - 10/Pk Slide Clips, Pink - 25 / Pk Slide Clips, White - 25 / Pk Slide Clips, Blue - 25 / Pk Slide Clips, Yellow - 25 / Pk Slide Clips, Green - 25 / Pk Anti-evaporation Lid (Single Station) Anti-evaporation Lid (Double Station) Anti-evaporation Lid (Triple Station) Stainless Steel Holding Tank Evaporation cover - 18" (46 cm) B Available Accessories Double Station Staining Dishes - 5/Pk Single Station Staining Dishes - 10/Pk Slide Clips, Pink - 25 / Pk Slide Clips, White - 25 / Pk Slide Clips, Blue - 25 / Pk Slide Clips, Yellow - 25 / Pk Slide Clips, Green - 25 / Pk Anti-evaporation Lid (Single Station) Anti-evaporation Lid (Double Station) Anti-evaporation Lid (Triple Station) Stainless Steel Holding Tank The Shandon Linistat is the compact answer to H&E frozen section protocols. Its efficient, footprint fits on top of most cryostats for streamlining workflow during frozen sectioning. Features include 14 staining stations (20 sec. each), running water and a 13-slide capacity collection tank. Staining time is under five minutes. For situations that require handstaining, the technician may dip through the stations, eliminating the need to set up separate staining dishes. Shandon color coded slide clips correspond to the colored slides and colored frozen section embedding media, Shandon Cryochrome. Physical Specifications Dimensions (H x W x D) 18.4 x 25 x 6.25 (27 x 64 x 15.9 cm) Clearance Height: 9.75 (24.8 cm) Weight 16.3 lbs. (7.3 kg) Power Requirements VAC, 60 Hz, Maximum 2.0A VAC, 50/60 Hz, Maximum 1.0A The 28-station (30 sec. each) Shandon GLX features a heater/dryer, and a ductless fume extraction system with a charcoal filter. A three-part cover allows the user to open only the section that is needed. Water stations may be added at 20 of the 28 positions. Thermostatically controlled heater at the beginning of the staining sequence maintains user selectable temperature from 50 C to 80 C. Physical Specifications Dimensions (H x W x D) x 59.5 x 14 (27 x 151 x 36 cm) Clearance Height: 12 (30.5 cm) Weight 60 lbs. (27 kg) Power Requirements VAC, 60 Hz, Maximum 2.0A VAC, 50/60 Hz, Maximum 1.0A 42 Histology Stainers Shandon Linear Stainers

45 43 Shandon Complete Staining Assemblies Histology Shandon Complete Staining Assembly 100 Complete Assembly 100 includes 109 rack/handle, 102 dish and 101 cover. Staining Rack 109 is made from stainless steel and holds up to 19 slides. Maximum slide size is 3 x 2 (75 mm x 50 mm). Staining Dish 102 is made from non-autoclavable glass with inside dimensions of 3.5 x 2.75 x 2.55 (90 x 70 x 65 mm). Staining Dish holds up to 250 ml of solution with a fully loaded staining rack. Staining Dish Cover 101 is made from stainless steel and included as part of Assembly 100. Staining Accessories Shandon Complete Staining Assembly 110 Pkg/Qty Complete Assembly 100 Each 100 Staining Rack Each 109 Staining Dish Each 102 Staining Dish Cover Each 101 Complete Assembly 110 includes 113 Rack/handle, 112 dish and 111 cover. Staining Rack 113 is made from stainless steel and holds up to 30 slides. Maximum slide size is 3 x 2 (75 mm x 50 mm). Staining Dish 112 is made from stainless steel with inside dimensions of 4.3 x 3.35 x 2.95 (110 x 85 x 75 mm). Staining Dish holds up to 350 ml of solution with a fully loaded staining rack. Staining Dish Cover 111 is made from stainless steel and included as part of Assembly 110. Pkg/Qty Complete Assembly 110 Each 110 Staining Rack Each 113 Staining Dish Each 112 Staining Dish Cover Each 111 Complete Staining Assemblies Shandon Complete Staining Assembly 117 Complete Assembly 117 includes 120 rack/handle, 119 dish and 118 cover. Staining Rack 120 is made from stainless steel and holds up to 60 slides. Maximum slide size is 3 x 2 (75 mm x 50 mm). Staining Dish 119 is made from stainless steel with inside dimensions of 7.95 x 3.35 x 2.95 (202 x 85 x 75 mm). Staining Dish holds up to 750 ml of solution with a fully loaded staining rack. Staining Dish Cover 118 is made from stainless steel and included as part of Assembly 117. Pkg/Qty Complete Assembly 117 Each 117 Staining Rack Each 120 Staining Dish Each 119 Staining Dish Cover Each 118

46 44 Shandon Complete Staining Assembly 121 Shandon Complete Staining Assembly 130 Plastic Staining Dish, Cover and Rack Complete Assembly 121 includes 113 rack/handle, 122 dish and 123 cover. Staining Rack 113 is made from stainless steel and holds up to 30 slides. Maximum slide size is 3 x 2 (75 mm x 50 mm). Staining Dish 122 is made from non-autoclavable glass with inside dimensions of 4.3 x 3.6 x 2.6 (110 x 92 x 67 mm). Staining Dish holds up to 350 ml of solution with a fully loaded staining rack. Staining Dish Cover 123 is made from stainless steel and included as part of Assembly 121. Pkg/Qty Complete Assembly 121 Each 121 Staining Rack Each 113 Staining Dish Each 122 Staining Dish Cover Each 123 Complete Assembly 130 includes 120 rack/handle, 131 dish and 132 cover. Staining Rack 120 is made from stainless steel and holds up to 60 slides. Maximum slide size is 3 x 2 (75 mm x 50 mm). Staining Dish 131 is made from non-autoclavable glass with inside dimensions of 7.95 x 4.4 x 2.8 (202 x 112 x 72 mm). Staining Dish holds up to 750 ml of solution with a fully loaded staining rack. Staining Dish Cover 132 is made from stainless steel and included as part of Assembly 130. Pkg/Qty Complete Assembly 130 Each 130 Staining Rack Each 120 Staining Dish Each 131 Staining Dish Cover Each 132 Rack/handle and dish with cover sold separately. Not available as a complete assembly. Staining Rack 196 is made from polyoxymethylene plastic and holds up to 25 slides. Maximum slide size is 3 x 2 (75 mm x 50 mm). Swing-down handle folds flat and does not detach. Staining Dish 195 is made from microwavable (up to 5 min.) plastic with inside dimensions of 3.7 x 3.1 x 1.9 (94 x 81 x 49 mm). Plastic lid is included with dish. Staining Dish holds up to 250 ml of solution with a fully loaded staining rack. Polyoxymethylene plastic withstands temperatures from -40 C to +90 C. Pkg/Qty Staining Dish and Cover Each 195 Staining Rack Each 196 Histology Staining Accessories Complete Staining Assemblies

47 45 Shandon Slide Racks Histology Staining Accessories Slide Racks Shandon Vertical Slide Staining Rack Holds 38 slides on end. Welded stainless steel for durability. Slides fit into individual slots to allow for free exchange and rapid drainage of staining reagents. 2.5 x 2.35 x 4.1 (65 x 60 x 105 mm). Pkg/Qty Shandon Vertical Slide Staining Rack Each 143 Shandon Slide Holder Individually stamped slots hold 10 (76 x 26 mm) slides vertically. Made from stainless steel. Will fit in glass Beaker No. 146 (see page 37). Not for use with No. 140 or No Pkg/Qty Shandon Slide Holder Each 147 Plastic Slide Grip Holds five (76 x 26 mm) slides; fits Coplin jars and round mouthed staining jars. Molded plastic withstands chemicals used in staining including special stains and metals. Can be used in temperatures to 80 C. Pkg/Qty Plastic Slide Grip Each 1975 Shandon Lantern Slide Rack Shandon Coverglass Staining Rack Shandon Coverglass Staining Rack Holds up to 24 lantern slides (51 x 51mm). Stainless steel construction for added durability. Slot spacing permits good drainage and reagent exchange. Includes spring-type detachable handle. Pkg/Qty Shandon Lantern Slide Rack Each 144 Securely holds five 22 mm or 24 mm coverslips. Welded stainless steel. Will fit in Vertical Staining Jar No. 140 (see page 49) or Glass Beaker No. 146 (see page 37). Pkg/Qty Shandon Coverglass Staining Rack Each 116 Securely holds thirty 22 mm or 24 mm coverslips. Welded stainless steel. Includes spring-type detachable handle. Measures 4 x 1.1 x 1.2 (102 x 28 x 30 mm). Pkg/Qty Shandon Coverglass Staining Rack Each 114 Shandon Stains on pages

48 46 Angus-Ranieri Slide Rack Shandon Pathologist s Slide Tray Holds up to forty 76 mm x 26 mm slides. Unit is 3.5 H x 25.5 W x 11.5 D Pkg/Qty Angus-Ranieri Slide Rack Each Secureline Marker II Permanent, non-toxic marker. Writes on plastic tissue cassettes, painted or frosted-end microscope slides, ceramic, vinyl, porcelain, metal and Mylar. Ink dries quickly, won t run or smear and resists alcohol and xylene. Fine point gives a thin, easy-to-read line. Pkg/Qty Shandon Secureline Marker II, Black Each 1451 Shandon Secureline Marker II, Red Each 1456 Shandon Glass Scriber Marks glass, ceramics and plastics. Scriber has metal pocket clip. Overall length is 5 (127 mm). Pkg/Qty Shandon Glass Scriber Each 749 Shandon Diamond Point Marker Writes indelibly on glass. Mounted in aluminum pencil. 6 (152 mm). Holds 30 slides. Made from white styrene plastic for improved specimen visibility. Special design reduces the possibility of excess mountant attaching to tray. Label is easy to view. Trays can be stacked. Measures x 13.5 x 0.5 (299 x 343 x 13 mm). Pkg/Qty Shandon Pathologist s Slide Tray Each 1256 Shandon Isolator Hydrophobic Marker Surround tissue sections to prevent solutions from spreading. Suitable for all aqueous staining procedures, including immunoenzyme or immunofluorescence, histochemistry/cytochemistry, DNA probe techniques, routine histology, cytology, virology, microbiology and tissue culture. Eliminates the need to wipe around specimens after each washing and before the application of the next reagent. Autofluorescent, useful for finding specimens by providing a plane of focus while doing immunofluorescence. Does not interfere with aqueous mounting medium and can be removed with organic solvents. Pkg/Qty Shandon Isolator, Fine Point Each 755 Shandon Isolator, Broad Point Each 754 Histology Staining Accessories Slide Markers Pkg/Qty Shandon Diamond Point Marker Each 750

49 47 Shandon Slide Staining Jars Histology Staining Accessories Staining Jars Shandon Plastic Coplin Staining Jar For general purpose use. Holds 10 slides back-to-back. 1.6 (40 mm) diameter circular tapered top. High-density polyethylene construction with internal grooves. Includes domed screw-on cap. Microwavable. Pkg/Qty Shandon Plastic Coplin Staining Jar Each 194 Shandon Plastic Spill-Free Slide Jar Holds 10 slides, one per slot 1.4 x 1 (36 x 26 mm) rectangular top with straight body. Polypropylene construction internal grooves. Integral snap-lock lid with reagentproof lid seal. Microwavable. Pkg/Qty Shandon Plastic Spill-Free Slide Jar Each Shandon Plastic Spill-Free Slide Jar Dozen Shandon Plastic Spill-Free Slide Jar 48 / Cs Shandon Coplin Staining Jar Holds 10 slides back-to-back. 1.6 (40 mm) diameter circular tapered top. Heavy, clear glass construction with internal grooves. Includes plastic screw-on cap. Pkg/Qty Shandon Coplin Staining Jar Each 107 Shandon Vertical Staining Jar Shandon Graduated Stainless Steel Beaker Holds 16 slides back-to-back x 1.85 (47 x 47 mm) square, flanged top. Heavy, clear glass construction with internal grooves. Includes flanged clear glass cover. Wide-mouthed for easy slide handling. Pkg/Qty Shandon Vertical Staining Jar Each 140 Shandon Horizontal Staining Jar Holds 20 slides back-to-back (horizontal orientation) x 2.35 (85 x 60 mm) rectangular top. Heavy, clear glass construction with internal grooves. Includes flanged clear glass cover. Pkg/Qty Shandon Horizontal Staining Jar Each 133 Inside graduated markings show milliliters and fluid ounces. Available in 16 fluid ounce (470 ml) or 32 fluid ounce (940 ml) sizes. Pkg/Qty Shandon Graduated Each 8516 Stainless Steel Beaker, 470 ml Shandon Graduated Each 8532 Stainless Steel Beaker, 940 ml

50 Shandon Rapid-Chrome Portable Staining Kits 48 Shandon Rapid-Chrome H&E Frozen Section Staining Kit Shandon Rapid-Chrome Kwik-Diff Staining Kit Produces permanently stained slides. The kit includes Rapid-Fixx, an economical, alcohol-based formalin ideal for fixing slides from frozen sections. Kit Components: Rapid-Fixx Fixative Gill 3 Hematoxylin Deionized Water Bluing Reagent Eosin Y 100% Alcohol Xylene Mounting Medium Pkg/Qty Rapid-Chrome H&E 100 Slide Capacity / Kit Frozen Section Staining Kit Shandon Rapid-Chrome Iron Stain / Fast Red Staining Kit Features convenient 1.2 ml Snap Sticks. Prussian Blue Iron reaction for hemosiderin or non-hemoglobin iron in cells and tissue. Nuclear Fast Red counterstain. 25 Iron Stain and 25 Fast Red counterstain snap stix per kit. Components also available separately. Pkg/Qty Rapid-Chrome 25 ea. Fast Red and Iron / Fast Red Staining Kit Iron Snap Sticks Iron Stain 25 Snap Sticks Fast Red Counterstain 25 Snap Sticks Specially configured for performing quick, high-quality differential stains. Ideal for FNA carts. Kit Components: Fixative Eosin Secureline Marker Methylene Blue Deionized Water Spill-Free Slide Jar 24 x 50, No. 1 Coverglass 1 Plastic Slide Grip Resin Mount Mountant Superfrost Slides 1 Cardboard Slide Folder Pkg/Qty Rapid-Chrome 100 Slide Capacity / Kit Kwik-Diff Staining Kit Shandon Rapid-Chrome Papanicolaou Staining Kit Kit is excellent for rapid results of fine needle aspirations or high risk specimens. It contains a five-slide holder and a portable tray. Kit Components: Rinse Water Gill 2 Hematoxylin Bluing Reagent OG-6 Mounting Medium EA-50 95% Alcohol 100% Alcohol Xylene Pkg/Qty Rapid-Chrome 100 Slide Capacity / Kit Papanicolaou Staining Kit Histology Staining Accessories Shandon Portable Staining Kits

51 49 Shandon Staining Reagents All stains use Biological Stain Commission certified dyes. Shandon Hematoxylins for Every Application Histology Staining Reagents and Supplies Shandon Stains Shandon Harris Harris Gill 1 Gill 2 Gill 3 Instant Unacidified Acidified Protocol Progressive or Regressive Regressive Progressive Progressive Progressive or Regressive Regressive Requires Formula Yes Yes No No Yes Filtration Dependent Benefits Flexible; can be No Mucoid No Mucoid For Delicate Will Not Intense; used in place of Staining Staining Nuclei; Overstain; Will Not Harris or Mayer s; Mucoid Staining Mucoid Staining Overstain; No Mucoid Staining Mucoid Staining Frozen Sections x x x x x Plastics x x x x x Immuno x x x Histochemistry Special Stains x x Cytology x x x x x Shandon Harris Hematoxylin No mucoid staining. Acidified; Intensely stained blue-black nuclei. Non-acidified; Intensely stained blue-black nuclei. Pkg/Qty Shandon Harris 4 L x Acidified Hematoxylin Shandon Harris 1 L x Acidified Hematoxylin Shandon Harris 4 L x Nonacidified Hematoxylin Shandon Harris 1 L x Nonacidified Hematoxylin Shandon Instant Hematoxylin No mucoid staining. May be used as a substitute for Harris or Gill. Stains from blue-black to light blue depending on preparation Shandon Gill Hematoxylin Mucoid staining. Gill 1; Light blue nuclei. Gill 2; Medium blue nuclei. Gill 3; Blue-black nuclei. Pkg/Qty Shandon Gill 1 Hematoxylin 4 L x Shandon Gill 1 Hematoxylin 1 L x Shandon Gill 2 Hematoxylin 4 L x Shandon Gill 2 Hematoxylin 1 L x Shandon Gill 3 Hematoxylin 4 L x Shandon Gill 3 Hematoxylin 1 L x Pkg/Qty Shandon Instant Hematoxylin 6 / Pk. (Makes 1 L x 6)

52 50 Shandon Bluing Reagent Blues hematoxylin-stained nuclei. Gentle no loss or lifting of material from slides associated with ammonia water. Thoroughly ph-controlled for completely effective bluing. Ready-to-use. Pkg/Qty Shandon Bluing Reagent 4 L x Shandon Bluing Reagent 1 L x Shandon Nu-Clear Nu-Clear is a specially formulated acid alcohol solution. Acid alcohol enhances staining by removing excess hematoxylin from the slide improving cell clarity. It will also clear the residual hematoxylin staining the glass. Nu-Clear has been designed to be used on the full line of Shandon automatic stainers as well as manual methods. Nu-Clear I is a fast-acting solution. It is recommended to be used as a 10 second step in most protocols. It is particularly beneficial for use with Harris hematoxylin and may be used on the Varistain 24-4K or the Varistain Gemini. Nu-Clear II is less concentrated. Recommended as a 20 second step and may be used on the Linistat and other linear stainers. It is recommended for use with Gill hematoxylins. Pkg/Qty Shandon Nu-Clear I Acid Alcohol 3.8 L x (fast-acting, 10 second step) Shandon Nu-Clear II Acid Alcohol 3.8 L x (20 second step) Shandon Eosin Y Stable and precipitate-free no filtering. Produces consistent results. ph-adjusted for maximum stain uptake. Produces brilliant staining. Compatible with all alum hematoxylin stains. Available in alcoholic or aqueous formulation. Ready-to-use. Fast acting cytoplasmic counterstain. Pkg/Qty Shandon Eosin Y Alcoholic 4 L x Shandon Eosin Y Alcoholic 1 L x Shandon Eosin Y Aqueous 4 L x Shandon Eosin Y Aqueous 1 L x Shandon Instant Eosin Stable and precipitate-free no filtering. Produces consistent results. ph-adjusted for maximum stain uptake. Produces brilliant staining. Compatible with all alum hematoxylin stains. Economical powder, stores indefinitely. Available as either an alcoholic or aqueous formulation. Histology Staining Reagents and Supplies Shandon Stains Pkg/Qty Shandon Instant Eosin (alcoholic) 6 / Pk. (Makes 6 L) Shandon Instant Eosin (aqueous) 6 / Pk. (Makes 6 L)

53 51 Shandon Gram Stain Shandon Acid Fast Bacillus Stain Histology Staining Reagents and Supplies Used as a routine bacteriologic stain on fixed smears and histological slides. Based on the popular Hucker modification. Demonstrates the presence of microorganisms such as bacteria and differentiates between Gram positive and Gram negative bacteria. Safranin O provided as a counterstain. Kit Components: Crystal Violet Stain; Gram Iodine (stabilized); Decolorizing Solution; Safranin O Counterstain. Available in kit form or as individual components. Pkg/Qty Shandon Gram Stain Kit 250 ml reagent size Shandon Gram Stain Kit 125 ml reagent size Shandon Gram Crystal Violet Stain 4 L x Shandon Gram Iodine 4 L x Shandon Gram Decolorizing Solution 4 L x Safranin O 4 L x Shandon Wright-Giemsa Stains Allows rapid differentiation of acid fast microorganisms from non-acid fast microorganisms. Methylene Blue provided as counterstain. No slide heating necessary. Stains and reagents are ready-to-use. Use as a routine stain in microbiology or as a special stain for histology. Kit Components: Acid Fast Bacillus Stain (Carbol Fuchsin); Acid Alcohol Decolorizer; Methylene Blue Counterstain. Available in kit form or as individual components. Pkg/Qty Shandon Acid Fast Bacillus Stain Kit 250 ml reagent size Shandon Acid Fast Bacillus Stain Kit 125 ml reagent size Shandon Acid Fast Bacillus Stain 250 ml x Shandon Acid Alcohol Decolorizer 250 ml x Methylene Blue Counterstain 250 ml x Shandon Kwik-Diff Stains Shandon Stains Eosinates of polychrome methylene blue yield rich color. Unique manufacturing process produces an intense differential stain for blood smears, bone marrows, mast cells and FNA s. Demonstrates microorganisms such as Microfilaria, Babesia, Haemobartonella, Giardia, Pneumocystis and Helicobacter. Kit Components: Wright-Giemsa Solution; Wright-Giemsa ph Balanced Buffer; Wright-Giemsa Rinse. Available in kit form or as individual components. Pkg/Qty Shandon Wright-Giemsa Stain Kit 500 ml reagent size Shandon Wright-Giemsa Stain Kit 125 ml reagent size Shandon Wright-Giemsa Solution 4 L x Shandon Wright-Giemsa 4 L x ph-balanced Buffer Shandon Wright-Giemsa Rinse 4 L x Fast 3-step differential stain for bone marrows, smears, FNA s and microorganisms such as Helicobacter pylori. A quick alternative to traditional Wright s and Giemsa Staining procedures. Kit Components: Reagent 1, Fixative; Reagent 2, Eosin; Reagent 3, Methylene Blue. Available in kit form or as individual components. Pkg/Qty Shandon Kwik-Diff Stain Kit 500 ml reagent size Shandon Kwik-Diff Stain Kit 125 ml reagent size Shandon Kwik-Diff Reagent 1, Fixative 4 L x Shandon Kwik-Diff Reagent 2, Eosin 4 L x Shandon Kwik-Diff Reagent 3, Methylene Blue 4 L x

54 52 Shandon Rapid Mucin Shandon Periodic Acid Schiff Kit (PAS) For the demonstration of mucin. Very stable for microwave use. 2 counterstains offered with kit - Metanil Yellow and Fast Green. Includes manual, instrument and microwave protocols. Total time including deparaffinization is 20 minutes. Pkg/Qty Shandon Rapid Mucin Kit 250 ml B Shandon Stain Removers Low cost and efficient way to remove stains from work surfaces, hands and clothes. No removes basic stains such as hematoxylins, safranin, toluidine, basic fuchsin, Wright, Giemsa, crystal violet and blood. No removes acid stains such as eosin, trichrome and Papanicolaou. No removes Schiff s Reagent. Pkg/Qty Shandon No Stain Remover, 237 ml x Basic Dyes No Stain Remover, 237 ml x Acid Dyes No Stain Remover, 237 ml x Schiff s Reagent Stain Remover Combination Pack 237 ml (1 x 3) One bottle of each 2626, 2627, and 2631 For the demonstration of polysaccharides, neutral mucosubstances, and basement membrane. Digestion kit included. Includes Harris Acidified Hematoxylin counterstain. Includes manual, instrument and microwave protocols. Pkg/Qty Shandon Periodic Acid 250 ml / Kit B Schiff Kit (PAS) Shandon Tissue Marking Dyes Permanently mark the margins of excised surgical specimens for exact orientation. Available individually or as a kit which includes one each of black, blue, yellow, red, and green, 50 applicator sticks and storage base. Special binding pigment evenly coats the tissue without penetrating the tissue surface. Does not interfere with diagnostic interpretation because the colors are not similar to standard histopathology dyes. Quick-drying and easy-to-use; decreases time factor in urgent frozen sectioning. Shandon Tissue Marking Dye Kit Shandon Blue Tissue Marking Dye Shandon Black Tissue Marking Dye Shandon Yellow Tissue Marking Dye Shandon Red Tissue Marking Dye Shandon Green Tissue Marking Dye Histology Staining Reagents and Supplies Shandon Stains

55 53 Shandon Consul Coverslipper Automated coverslipper. Shandon Consul Specifications Shandon Consul V, 50/60Hz Shandon Consul V, 50/60Hz Histology Coverslippers The Shandon Consul permanently covers slide-mounted specimens using routinely accepted glass coverslips. This is the only method truly compatible with the optics of today's high-performance microscopes and image analysis systems. Quality Automates coverslipping and maintains long-term storage quality of specimens. Coverslips 400 slides per hour using permanent, glass coverslips. Physical Specifications Dimensions (H x W x D)* 23.6 x 27.2 x 20 (60 x 69 x 51 cm) *Clearance Height (hood up) is 40.9 (103.8 cm). Weight 121 lbs. (55 kg) Power Requirements V or V, 50/60Hz; 100 VA Included with Product* 40-Slide Support Rod - 2 / Pk. (2 packs supplied) Slide Loader Xylene Tank Wick - 12 / Pk Slide Clips / Pk. (2 packs supplied) Multiple Slide Support Rod Bench Stand Disposable Tray - 10 / Pk mm Hopper mm Hopper mm Coverslip Holder mm Coverslip Holder Clip Transfer Tool A Mountant Jar Assembly Vapor Filter Blade Support Plate and Skirt Service Record Book A Operator Manual (specify language) * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Safety The system reduces operator exposure to solvents. Eliminates repetitive motion which can lead to injury. Unit comes with built-in activated charcoal filter; vent adapter kit is also available. Slides are stored in a clearant reservoir before coverslipping. Available Accessories Adapter Spindle Vent Adapter Kit Slide Support Rod Slide Support Rod Bench Stand Service Manual Mountant Jar Only Slide Support Rod A Shandon Consul Versatility Accepts coverslip sizes 22, 24 x 40, 50, 55, 60 mm. Accommodates slides from 0.8 to 1.2 mm in thickness. Accuracy High-precision computerized mountant dispense system gives the user 9-level control of mountant dispense volume. Optical sensors detect incorrect or multiple coverglass feed. Roll-on pressure pad assures smooth adhesion. Mountant and roller pad pressure can be adjusted for either histology or cytology preparations. Agency Approvals CE Mark on 240V unit (IVDD Compliant). Simplicity Daily maintenance takes less than ten minutes. Integrates with Stainers Integrates with the Shandon Varistain 24-4 and Varistain Gemini. Adaptable to competitor model stainers.

56 Shandon Coverslips 54 (in mm) Shandon General Purpose Coverslips Specifications Size (L x W x D) Pkg/Qty 18 x 18 mm x 1.0 mm 5 x 200 Pieces / Pk x 22 mm x 1.0 mm 5 x 200 Pieces / Pk x 26 mm x 1.0 mm 10 x 100 Pieces / Pk x 32 mm x 1.0 mm 10 x 100 Pieces / Pk x 40 mm x 1.0 mm 10 x 100 Pieces / Pk x 50 mm x 1.0 mm 10 x 100 Pieces / Pk x 60 mm x 1.0 mm 10 x 100 Pieces / Pk x 64 mm x 1.0 mm 10 x 100 Pieces / Pk x 70 mm x 1.0 mm 10 x 100 Pieces / Pk x 24 mm x 1.0 mm 5 x 200 Pieces / Pk x 32 mm x 1.0 mm 10 x 100 Pieces / Pk x 40 mm x 1.0 mm 10 x 100 Pieces / Pk x 50 mm x 1.0 mm 10 x 100 Pieces / Pk x 60 mm x 1.0 mm 10 x 100 Pieces / Pk x 22 mm x 1.5 mm 5 x 200 Pieces / Pk x 26 mm x 1.5 mm 10 x 100 Pieces / Pk x 32 mm x 1.5 mm 10 x 100 Pieces / Pk x 40 mm x 1.5 mm 10 x 100 Pieces / Pk x 50 mm x 1.5 mm 10 x 100 Pieces / Pk x 40 mm x 1.5 mm 10 x 100 Pieces / Pk x 50 mm x 1.5 mm 10 x 100 Pieces / Pk x 60 mm x 1.5 mm 10 x 100 Pieces / Pk x 22 mm x 2.0 mm 10 x 100 Pieces / Pk (102 mm) length. Angled tips. Stainless steel construction. Coverslip Size Guide Kuehne Coverglass Forceps Pkg/Qty Kuehne Coverglass Forceps Each Highest quality glass, free from blisters and flaws. Cleaned and polished. Consistent in cut, thickness and dimensional accuracy. Consul no-stick coverslips are designed to not stick together, making them ideal for use on the Shandon Consul Automated Coverslipper. Shandon Consul No-Stick Coverslips Specifications Size (L x W x D) Pkg/Qty 22 x 40 mm x 1.0 mm 10 x 100 Pieces / Pk x 50 mm x 1.0 mm 10 x 100 Pieces / Pk x 60 mm x 1.0 mm 10 x 100 Pieces / Pk x 40 mm x 1.0 mm 10 x 100 Pieces / Pk x 50 mm x 1.0 mm 10 x 100 Pieces / Pk x 60 mm x 1.0 mm 10 x 100 Pieces / Pk x 40 mm x 1.5 mm 10 x 100 Pieces / Pk x 50 mm x 1.5 mm 10 x 100 Pieces / Pk x 60 mm x 1.5 mm 10 x 100 Pieces / Pk x 40 mm x 1.5 mm 10 x 100 Pieces / Pk x 50 mm x 1.5 mm 10 x 100 Pieces / Pk x 55 mm x 1.5 mm 10 x 100 Pieces / Pk x 60 mm x 1.5 mm 10 x 100 Pieces / Pk Shandon Coverglass Forceps 4.5 (114 mm) length. Flat, square tips. Stainless steel construction. Pkg/Qty Shandon Coverglass Forceps Each Novy Coverglass Forceps 4 (102 mm) length. One flat, square tip; one round tip. Stainless steel construction. Pkg/Qty Novy Coverglass Forceps Each 1912 Histology Coverslipping Supplies Coverslips and Accessories

57 55 Shandon Coverslipping Mountants Shandon-Mount Shandon Immu-Mount Histology Coverslipping Supplies Permanent mounting medium for conventional coverslipping. Economical, organic overnight-drying liquid coverslip. Toluene base. Refractive index: ±0.005 (dry). Viscosity: Low ( ºC). Pkg/Qty Shandon-Mount 60 ml x Shandon-Mount 120 ml x Shandon-Mount 500 ml x Shandon AquaPerm Non-permanent mountant. Economical, organic overnight-drying liquid coverslip. Aqueous base for immunostaining and other techniques. Non-fluorescing medium with a low viscosity for maximum specimen absorption. Resists fading and polymerizes quickly for easier handling of finished slides. Refractive index: ±0.002 (liquid); ±0.002 (dry) Viscosity: Low ( ºC). ph: 21-24º C. Pkg/Qty Shandon Immu-Mount 20 ml x Shandon Immu-Mount 20 ml x Shandon Immu-Mount 1 L Shandon Xylene Substitute Mountant Mounting Media Aqueous-based liquid coverslip mountant. Economical, organic overnight-drying liquid coverslip. Coats specimens with a thin, hard, semi-permanent protective layer. Specimens may be permanently coverslipped with organic mountant after drying. Minimizes chromogen fading. Refractive index: ±0.005 Viscosity: Very Low ( ºC). ph: 21-23º C. Pkg/Qty Shandon AquaPerm 8 ml x Shandon AquaPerm 15 ml x Shandon AquaPerm 30 ml x Shandon AquaPerm 250 ml x Permanent, organic mounting medium is compatible with all routine xylene substitute clearing agents. Formulated specifically for use with Shandon Xylene Substitute. Toluene base. Refractive index: ±0.005 (dry). Viscosity: Medium ( ºC). Pkg/Qty Shandon Xylene Substitute Mountant 60 ml x Shandon Xylene Substitute Mountant 120 ml x Shandon Xylene Substitute Mountant 500 ml x

58 56 Shandon EZ-Mount Shandon Synthetic Mountant Shandon PermaFluor Permanent, organic mountant. Compatible with membrane filters. Xylene base. Refractive index: ±0.005 (dry). Viscosity: High ( ºC) Pkg/Qty Shandon EZ-Mount 500 ml x Permanent, organic mountant. Toluene base. Refractive index: ±0.005 (dry). Viscosity: Medium ( ºC) Pkg/Qty Shandon Synthetic Mountant 500 ml x Aqueous-based mounting medium. High ph ensures maximum fluorescence of FITC. Does not contain anti-fade. Enhances FITC intensity. ph: 21-24º C. Pkg/Qty Shandon PermaFluor 6 ml x Shandon PermaFluor 30 ml x Shandon Consul-Mount (Cytology Formulation) Shandon Consul-Mount (Histology Formulation) Permanent, organic mountant. Designed specifically for use with the Shandon Consul coverslipper. Xylene base. Refractive index: ±0.005 (dry). Viscosity: Medium / High ( ºC) Pkg/Qty Shandon Consul-Mount 500 ml x Cytology Formulation Permanent, organic mountant. Designed specifically for use with the Shandon Consul coverslipper. Xylene base. Refractive index: ±0.005 (dry). Viscosity: Medium ( ºC) Pkg/Qty Shandon Consul-Mount 500 ml x Histology Formulation Shandon Colorfrost Slides Available in a wide variety of colors to ease identification. Resistant to commonly used laboratory solvents mm thick with ground edges. Shandon Colorfrost Plus Slides Positively charged microscope slides give improved cellular adhesion. Electrostatically attracts tissue sections and cytology preparations, binding them to the slide. Eliminates the need for special adhesives or protein coatings. Histology Coverslipping Supplies Mounting Media

59 57 Shandon Carousel Cassette MicroWriter Carousel-type cassette marking system. Shandon Carousel Cassette MicroWriter Specifications Histology Shandon Carousel V, 50/60 Hz A Cassette MicroWriter V, 50/60 Hz l A with Dell PC and B Touch Screen Monitor* Available in North America only. l includes licensed Shandon MicroWriter Software CD. Physical Specifications Dimensions (H x W x D) 32.8 x 10.5 x 13 (83 x 26 x 33 cm) Weight 7.6 lbs. (16.8 kg) Power Requirements V, 50/60 Hz; 100 VA Capacity 75 cassettes per hopper; 6 hoppers per unit. Specimen Labelers Shandon MicroWriter Series Permanently mark tissue cassettes with easy to read black type. Uses foil tape and a heated stylus to imprint characters that maintain legibility even through processing solutions. Made to withstand the workload of busy laboratories, marking approximately 20,000 characters per roll of tape. Printing can be inverted for reading in either direction. Change cassette color and style easily with fully automated dispensing and labeling process. Easy-to-change hoppers give you the flexibility of allowing an unlimited number of colors and cassettes. Imprints letters, numbers, Roman numerals, and special characters on the cassettes in four font sizes. Largest font writes a single line of up to 8 characters, and the smallest font writes three lines of 19 characters. Ability to print barcodes on cassettes. Prints on all 45 flat-faced cassettes. Choice of Collection Systems makes organizing cassettes a seamless operation in any laboratory environment. Included with Product* CD with unlicensed demo copy of Shandon MicroWriter software Dispenser Hoppers - 6 included Pre-filled Cassette Tube Sample Pack MicroWriter Specific RS232 Cable Power Cord Operator Manual (specify language) * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Barcode Reader 110V with US Plug A V with UK Plug A V with European Plug A Shandon MicroWriter Software CD Licensed A Unlicensed Demo Copy A Shandon MicroWriter Plus Software CD Licensed (includes 2 licenses) A Unlicensed Demo Copy A Empty Plastic Tubes for Cassettes (20 per box) A Stainless Steel Collection Chute (see page 58) A Hot Foil Tape A Stainless Steel Collection System (see page 58) A Additional Collection Hopper A for Collection System A (see page 58) Hopper Holder A Dell Controller PC and touchscreen monitor for use with B Shandon MicroWriters; comes pre-loaded with Shandon MicroWriter Plus software. (North America only) Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark. *See page 58 for specifications of computer and monitor when sourced locally outside of North America.

60 Shandon MicroWriter Collection Systems Collection systems for the Carousel Cassette MicroWriter. 58 Stainless Steel Collection Chute Stainless Steel Collection System Cassettes slide onto table in order of print. System is very durable and installs in minutes. Stainless Steel Collection Chute Shandon MicroWriter Computer Available for sale in North America only. Specifications Power Requirements: V, 50/60 Hz Dell PC with 5 Serial Ports and Touch-screen Monitor Shandon MicroWriter Plus software Installed (one license included for operation of labeler) A Complete Package. Ready to use. Runs up to 4 labelers at one time. Touch-screen display. On-screen keyboard. Comes pre-loaded with Shandon MicroWriter Plus software. Dual voltage unit. Can operate Shandon Slide, Carousel, or Microwriter I units. Holds 75 cassettes in order of print. Allows random access to all cassettes. System is very durable and installs in minutes. System includes platform, hopper, and collection guideplate. Stainless Steel Collection System Extra Collection Hoppers * Computer Specifications if purchased outside of North America: IBM compatible computer. Windows 2000 or higher operating system. 128 MB RAM. A A Histology Specimen Labelers Shandon MicroWriter Series

61 59 Shandon MicroWriter I Cassette Labeler Permanent cassette marking system. AVAILABLE IN NORTH AMERICA AND SELECTED COUNTRIES ONLY. (Consult with your local distributor for availability.) Shandon MicroWriter I Cassette Labeler Specifications Histology Shandon MicroWriter I without controlling PC, with A V, Single Hopper Unit MicroWriter specific RS232 Cable with Dell PC and B Touch-Screen Monitor* l with integral PC and A Flexible Keyboard** l l includes licensed Shandon MicroWriter Software CD. ** Available outside North America only. Specimen Labelers Permanently mark tissue cassettes with easy-to-read black type. Uses foil tape and a heated stylus to imprint characters that maintain legibility even through processing solutions. Printing may be inverted for reading in either direction. Ability to print barcodes on cassettes. Made to withstand the workload of busy laboratories, marking approximately 20,000 characters per roll of tape. Single hopper loading system is ideal for laboratories that use single color cassettes or have a lower volume. Can be purchased with a PC and preloaded software so it is ready to use right out of the box. Hopper holds 75 cassettes. A variety of cassettes can be purchased preloaded in plastic tubes. Prints on all 45 flat-faced cassettes. Physical Specifications Dimensions (H x W x D) 10.3 (30.8 with hopper) x 10.5 x 11.6 (26 [78} x 26.5 x 29.5 cm) Tape Width: 11.4 (29 cm) Weight 24.3 lbs. (9.3 kg) Power Requirements V, 50/60 Hz; 100 VA Capacity 75 cassettes per hopper Available Accessories Hopper for Shandon MicroWriter I Collection Guide Chute for Shandon MicroWriter I Stainless Steel Collection System Stainless Steel Collection Hopper Dell Controller PC and touchscreen monitor for use with Shandon MicroWriters; comes pre-loaded with Shandon MicroWriter Plus software. (North America only) Shandon MicroWriter Software CD Licensed Unlicensed Demo Copy Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark. A A A A B A A Shandon MicroWriter Series *See page 58 for specifications of computer and monitor when sourced locally outside of North America. Shandon Cassette Tube Packs See pages Cassettes with lids. Cassettes without lids. Qty per Order: 10 Tubes; 75 Cassettes /Tube Packed in 75-cassette tubes for use with the MicroWriter Cassette Labeler or simply as a convenient method of storage. Available with: Shandon Biopsy Cassettes II Shandon Microsette Biopsy Cassettes Shandon Micromesh Biopsy Cassettes Shandon Tissue Cassettes Shandon Tissue Cassettes II Shandon Tissue Cassettes IV

62 Shandon Two-Hopper Cassette MicroWriter Cassette marking system. AVAILABLE IN SELECTED COUNTRIES OUTSIDE THE U.S. ONLY. (Consult with your local distributor for availability.) 60 Shandon Two-Hopper Cassette MicroWriter Specifications The Shandon Cassette MicroWriter works on the same principle as the Carousel MicroWriter but has two fixed hoppers. A 4 Hopper Unit is available which when connected alongside increases the number of hoppers to six. The Shandon Cassette MicroWriter uses foil tape and a heated stylus to imprint characters that maintain legibility even through processing solutions. It is made to withstand the workload of busy laboratories marking approximately 20,000 characters per roll of tape. Printing can be inverted for reading in either direction. Unit can be ordered with an optional Barcode Reader. Shandon Cassette Microwriter V A With Hot Foil Tape and unlicensed MicroWriter Software demo CD Shandon Cassette Microwriter V A With Hot Foil Tape with licensed MicroWriter Software CD Shandon Cassette Microwriter V A With unlicensed MicroWriter Software demo CD Shandon Cassette Microwriter V A With licensed MicroWriter Software CD Shandon Cassette Microwriter V A With Hot Foil Tape plus 2 mechanisms for Plastic Hoppers With unlicensed MicroWriter Software demo CD Shandon Cassette Microwriter V A With Hot Foil Tape plus 2 mechanisms for Plastic Hoppers With licensed MicroWriter Software CD Physical Specifications Dimensions (H x W x D) 32.7 x 12.9 x (26.3 x 32.8 x 83 cm) Weight 7.8 kg Electrical: Plug Fuse Rating: 5 amp (UK. Only) Power Consumption: 100 watts maximum Power Supply / Rating: Vac, 50 Hz Capacities: Plastic Hoppers x 2 = 150 cassettes Available Accessories Mechanism for use with Plastic Hoppers A Empty Plastic Hoppers - 20 / Pk. A Hopper Unit A Hopper Unit - including 4 mechanisms A Collection Guide Shoot A Hot Foil Tape A New Collection System - with removable lid A Stainless Steel Collection Hopper A New Collection System - for collection of cassettes A into plastic hoppers Cassette Hopper Storage Rack A Plastic Hopper Cassette Loading Platform A Operator Manual A Service Manual A Shandon MicroWriter Software CD Licensed A Unlicensed Copy A Histology Specimen Labelers Shandon MicroWriter Series

63 61 Shandon Laser MicroWriter First laser labeling system developed specifically for anatomical pathology. PRESENTLY AVAILABLE IN THE U.S. ONLY. (Consult with your local distributor for future availability.) Shandon Laser MicroWriter Slide Labeler Specifications Histology Specimen Labelers Shandon MicroWriter Series NEW Flexible. Prints 1D and 2D barcodes, text, logos, and graphics in 26 different fonts. Prints in any orientation (horizontally, vertically, etc). Prints clearly and legibly on any standard slide. Adapts to multiple slide requirements (multi-color slide loading and sorting for special needs). Runs up to 6 different slide colors at one time. Ease of Use. Uses existing barcode labeling systems to simplify data entry and to reduce sample identification errors. Simple communuication makes interfacing to any LIS system easy with system-level software packages. Easy to load, organize, and offload slides. Reduces IT involvement during installation. Productivity and Efficiency Improvements. No more time consuming hand labeling and re-labeling of slides. Low operating costs due to the elimination of ink, labels, cleaning fluid, or special slides. High capacity and speed (three slides per second with text only; one slide per second with bar code). Label system allows slides to be read on other equipment in the lab. Capacity. High capacity dispense and collection hoppers hold 432 slides. The six position hoppers allow for easy change of color or type of slide; additonal hoppers can be used to extend capacity. Shandon Laser MicroWriter V, without B controlling PC, with RS232 Serial Interface, network-ready V, without B controlling PC, with RS232 Serial Interface, network-ready V, with Dell PC B and Touch-Screen Monitor V, with controlling PC B Physical Specifications Dimensions (H x W x D) Transport Unit: 21.4 x 29.1 x 22.7 (54.4 x 73.8 x 57.6 cm) Controller Unit: 9.3 x 18.9 x 15.9 (23.7 x 48.0 x 40.5 cm) Fume Extractor: 28.1 x 16.9 x 16.9 (71.5 x 43.0 x 43.0 cm) Weight (total) 230 lbs. (115 kg) Power Requirements 110 or 240V, 50/60 Hz; 1,100 VA Capacity Six hoppers per unit; each hopper holds 72 slides Available Accessories Delivery Carousel Collection Carousel Shandon MicroWriter Universal Interface Shandon MicroWriter Universal Interface Developer Dell Controller PC and touchscreen monitor (North America only) B B B B B Safety High quality ventilation system provided that will continually monitor exhaust and hazardous fumes. Safety interlock protects operator while the door is open. These examples show some of the available bar coding systems and fonts. See selection of slides on pages

64 62 Shandon Laser MicroWriter Software Packages PRESENTLY AVAILABLE IN THE U.S. ONLY. (Consult with your local distributor for future availability.) Shandon MicroWriter Universal Interface. Software to interface to an existing MicroWriter connection. Shandon MicroWriter Universal Interface Developer Software. Software to develop interface connections to other LIS systems. Accepts text files and then configures the data to print on the required slides. Shandon MicroWriter Universal Interface Shandon Universal Interface Developer Shandon Barcode Reader for Slides Shandon Barcode Reader for Cassettes Shandon 2-D Matrix Print Spooler B B B A A Compatible with Microsoft Windows Server 2003, XP, 2000, Me, 98, and NT 4.0 (service pack 6a). Shandon Laser MicroWriter Workflow Management Improve workflow using the MicroWriter family of products. Specimen Bottle Barcode Reader Shandon Carousel Cassette MicroWriter Labeled Cassettes Labeled Cassettes Barcode Reader Shandon Laser Labeled Slides MicroWriter Histology Specimen Labelers Shandon MicroWriter Series

65 63 Shandon Disposable Cassettes Histology Shandon Micromesh Biopsy Cassettes Made of acetal polymer, the Micromesh Biopsy Cassettes have 1400 square openings (0.38mm) allowing for greatly improved fluid exchange without having to use biopsy sponges. A large compartment measuring 24 x 27mm is perfect even for needle biopsies. The recessed lid is specially designed to lie flush with the top surface of the cassette. This feature allows the cassettes to be labeled on the Shandon MicroWriter series automatic labelers with the lids on. Cassette writing face is at a 45 angle. Loose cassettes are supplied in cases of 4 boxes of 250 cassettes each with lids attached. Tube packs are supplied in cases of 10 tubes of 75 cassettes each with lids attached. Cassettes and Slides Disposable Cassettes Picture shows tube cassette packaging. Shandon Microsette Biopsy Cassettes Picture shows tube cassette packaging. Color 250 / Box x 4 75 / Tube x 10 White B WH B WH Pink B PK B PK Green B GR B GR Yellow B YW B YW Blue B BL B BL Gray B GY B GY Orange B OR B OR Peach B PE B PE Tan B TN B TN Lilac B LI B LI Aqua B AQ B AQ Made of acetal polymer, the Microsette Biopsy Cassettes have a large compartment measuring 25mm x 30 mm. Perfect even with needle biopsies since holes have a diameter of only 0.26 mm while still allowing for maximum fluid exchange. Biopsy sponges are no longer necessary. Cassette writing face is at a 45 angle. Loose cassettes are supplied in cases of 4 boxes of 250 cassettes each with lids attached. Tube packs are supplied in cases of 10 tubes of 75 cassettes each and may be used on the Shandon MicroWriter cassette labelers. Color 250 / Box x 4 75 / Tube x 10 White B WH B WH Pink B PK B PK Green B GR B GR Yellow B YW B YW Blue B BL B BL Gray B GY B GY Orange B OR B OR Peach B PE B PE Tan B TN B TN Lilac B LI B LI Aqua B AQ B AQ Dark Green B DGR B DGR Dark Red N / A B DRD

66 Shandon Biopsy Cassettes I Shandon Biopsy Cassettes II Picture shows tube cassette packaging. Shandon Tissue Cassettes I Made of acetal polymer, the Biopsy Cassettes I are specially designed to hold biopsy specimens during processing and embedding. Cassette writing face is at a 30 angle. Pore style is small square. Supplied in a box of 500 cassettes with attached breakaway lids. Not available in Tube Packs. Color 500 / Box White Pink Green Yellow Blue Gray Orange Peach Tan Lilac Aqua Made of acetal polymer, the Biopsy Cassettes II are specially designed to hold biopsy specimens during processing and embedding. Cassette writing face is at a 45 angle. Pore style is small square. Supplied in box of 500 cassettes with attached lids. Tube Packs are supplied in 10 tubes of 75 cassettes each and may be used on the Shandon MicroWriter cassette labelers. Color 500 / Box 75 / Tube x 10 White B WH Pink B PK Green B GR Yellow B YW Blue B BL Gray B GY Orange B OR Peach B PE Tan B TN Lilac B LI Aqua B AQ Dark Red N / A B DRD Fluorescent Green N / A B FGR Fluorescent Pink N / A B FPK Fluorescent Yellow N / A B FYW Made of acetal polymer, the Tissue Cassettes I are specially designed to hold tissue specimens during processing and embedding. Cassette writing face is at a 30 angle. Pore style is small slots. Supplied in box of 500 cassettes with attached breakaway lids. Not available in Tube Packs. Color 500 / Box White Pink Green Yellow Blue Gray Orange Peach Tan Lilac Aqua Histology Cassettes and Slides Disposable Cassettes

67 65 Shandon Tissue Cassettes II Made of acetal polymer, the Tissue Cassettes II are specially designed to hold tissue specimens during processing and embedding. Cassette writing face is at a 45 angle. Pore style is small slots. Supplied in box of 500 cassettes with attached lids. Tube Packs are supplied in 10 tubes of 75 cassettes each and may be used on the Shandon MicroWriter cassette labelers. Histology Slides and Cassettes Picture shows tube cassette packaging. Shandon Tissue Cassettes IV Color 500 / Box 75 / Tube x 10 White B WH Pink B PK Green B GR Yellow B YW Blue B BL Gray B GY Orange B OR Peach B PE Tan B TN Lilac B LI Aqua B AQ Dark Green N / A B DGR Dark Red N / A B DRD Dark Blue N / A B DBL Fluorescent Green N / A B FGR Fluorescent Pink N / A B FPK Fluorescent Yellow N / A B FYW These disposable plastic cassettes are designed to hold tissue specimens during processing and embedding. Pore style is small slots. Supplied in box of 250 cassettes with attached lids. Tube Packs are supplied in 10 tubes of 75 cassettes each. Shandon Tissue Cassette IV can be used with the Shandon Carousel Cassette MicroWriter (see page 57) only. They are incompatible with Shandon MicroWriter I (see Page 59). Disposable Cassettes Color 250 / Box 75 / Tube x 10 White T Pink T Green T Yellow T Blue T Gray T Orange T Peach N / A N / A Tan T Lilac N / A Aqua N / A N / A Shandon Tissue Cassettes IV can be used with the Shandon Carousel Cassette MicroWriter only (incompatible with Shandon MicroWriter I). Picture shows tube cassette packaging.

68 Shandon Tissue Cassettes Made of acetal polymer, the Tissue Cassettes are suitable for holding and identifying tissue samples in processing, embedding and sectioning procedures. The cassettes fit securely in microtome chuck adapters. These cassettes are designed to accept metal lids (Order number , 25 / pk, sold separately). Pore style is round holes. Supplied in a box of 500 cassettes. Tube Packs are supplied in 10 tubes of 75 cassettes each and can be used on the Shandon MicroWriter cassette labelers. 66 Picture shows tube cassette packaging. Shandon Super Mega Cassettes These disposable plastic cassettes with a large compartment of 72mm x 52mm x 17mm are suitable for processing and embedding large blocks, whole organs or small animals. Supplied in box of 100 cassettes. Color 100 / Box White Green Color 500 / Box 75 / Tube x 10 White B WH B WH Pink B PK B PK Green B GR B GR Yellow B YW B YW Blue B BL B BL Gray B GY B GY Orange B OR B OR Peach B PE B PE Tan B TN B TN Lilac B LI B LI Aqua B AQ B AQ Dark Red B DRD N / A Dark Blue B DBL N / A Shandon Embedding Rings Made of high impact polystyrene, the Embedding Rings fit well in microtome chuck adapters. The embedding ring securely holds the tissue sample in the microtome chuck adapter for sectioning and permits identification of the sample while in storage. Supplied in a box of 250 rings. Color 250 / Box White Pink Green Yellow Blue Uni-Capsettes Hold tissue specimens during processing and embedding. Pore style is small slots. Supplied in a bag of 500 cassettes with lids packaged separately. Not available in Tube Packs. Color 500 / Bag White Pink Green Yellow Blue Orange Tan Lilac Aqua Gold Histology Cassettes and Slides Disposable Cassettes

69 67 Shandon MicroWriter Slide Labeler Permanent slide marking system. AVAILABLE IN NORTH AMERICA AND SELECTED COUNTRIES ONLY. (Consult with your local distributor for availability.) Shandon MicroWriter Slide Labeler Specifications Histology Specimen Labelers Shandon MicroWriter Slide Labeler Permanently etches specimen identification information onto the end of a microscope slide using a diamond-tipped stylus. Printing may be inverted for reading in either direction. Etches letters, numbers, Roman numerals and special characters on the slides in four font sizes. The largest font writes three lines of up to 7 characters and the smallest setting writes 6 lines of 14 characters. Ability to print barcodes on slides. Numbers and letters can be automatically incremented for the desired number of slides. Integrated Dust Extractor s powerful vacuum pulls dust from the writing area into an easy-to-clean particle filter requiring no additional tools for removal. Dispense hopper holds up to 72 slides which feed directly into the printing system. Once printed, slides are stacked in the collection hopper in the order in which they were printed to ensure easy handling. Accepts standard 75 x 25 mm slides with plain ends, color ends, frosted ends, and back-masked ends. Additional hoppers are available when mulitple colors or types of slides are used. *See page 58 for specifications of computer and monitor when sourced locally outside of North America. Shandon MicroWriter V 60 Hz A Slide LabelerMicroWr V 60 Hz l A with Dell PC and B Touch Screen Monitor* Available in North America only V 50 Hz A V 50 Hz l A l includes licensed Shandon MicroWriter Software CD. Physical Specifications Dimensions (H x W x D) Unit: 8.19 x 10.4 x 14.3 (20.5 x 26 x 36 cm) Dust Extractor: 6.8 x 9.9 x 13.5 (17 x 25 x 34 cm) Weight Unit: 7.5 lbs. (16.5 kg) Dust Extractor: 19.8 lbs. (9.8 kg) Power Requirements V, 50/60 Hz; 100 VA Capacity 72 slides per hopper Included with Product* Shandon MicroWriter Software Demo Copy Only CD with unlicensed demo copy of Shandon MicroWriter software. MicroWriter Specific RS232 Cable Slide Collection Hopper Slide Dispense Hopper Vacuum Hose Power Cord Operator Manual (specify language) * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Barcode Reader 110V with US Plug A V with UK Plug A V with European Plug A Shandon MicroWriter Software CD Licensed A Unlicensed Demo Copy A Shandon MicroWriter Plus Software CD Licensed (includes 2 licenses) A Unlicensed Demo Copy A Slide Dispensing Hopper A Slide Collection Hopper A Diamond Stylus A Dell Controller PC and touchscreen monitor for use with B Shandon MicroWriters; comes pre-loaded with Shandon MicroWriter Plus software. (North America only) Agency Approvals Designed to meet IEC 61010, CSA, UL, and CE Mark.

70 Shandon Microscope Slides 68 Made from the finest sheet glass. Individually selected for uniform quality and tested for cleanliness. Annealed to minimize breakage. Standard slide measures 3 x 1 (76 x 26 mm). Double Frost Slides Frosted end on both sides. Available with either cut or ground edges. Ground edges available as either 45 or 90. Two thicknesses: mm or mm. Also available as Single Frost. Double Frost Slides 1000 / Cs Cut Edge, mm Double Frost Slides 1000 / Cs Ground Edge, 45, mm Double Frost Slides 1000 / Cs Ground Edge, 90, mm Double Frost Slides 1000 / Cs Ground Edge, 90, mm Single Frost Slides 1000 / Cs Ground Edge, 90, mm Plain Slides Available with either cut or ground edges. Three thicknesses: mm or mm. Pkg/Qty Plain Slides 1000 / Cs Cut Edge, mm Plain Slides 1000 / Cs Ground Edge, 90, mm Plain Slides 1000 / Cs Ground Edge, 90, mm Polysine Slides Polysine places an advanced permanent adhesive on the microscope slide. Provides superior cell and tissue adhesion. Built-in chemicals electrostatically and chemically attract. Polysine Slides 144 / Pk White 1440 / Cs CS Polysine Slides 144 / Pk Blue 1440 / Cs CS Multi-Spot Slides Available with 12 wells of 6 mm or 9 mm diameters. Wells are surrounded by a chemical and water-resistant PTFE coating. PTFE coating enables slides to be washed several times for reuse. Multi-Spot Slides 100 / Box mm wells Multi-Spot Slides 100 / Box mm wells Cytoslides Single Cytoslides. See page 85. Double Cytoslides. See page 85. Mask Cytoslides. See page 85. Histology Cassettes and Slides Microscope Slides

71 69 Histology Cassettes and Slides Microscope Slides Shandon Colorfrost Slides Available in a wide variety of colors to ease identification. Resistant to commonly used laboratory solvents mm thick with ground edges. Shandon Colorfrost Plus Slides Positively charged microscope slides give improved cellular adhesion. Electrostatically attracts tissue sections and cytology preparations, binding them to the slide. Eliminates the need for special adhesives or protein coatings. Shandon Slides Ordering Information SHANDON COLORFROST White 1000 / Cs Blue 1000 / Cs Green 1000 / Cs Pink 1000 / Cs Yellow 1000 / Cs Burnt Orange 1000 / Cs Lavender 1000 / Cs Tan 1000 / Cs Aqua 1000 / Cs Gold 1000 / Cs Strawberry Red 1000 / Cs SHANDON COLORFROST PLUS j White 144 / Pk. j / Cs. j CS Blue 100 / Box j Green 100 / Box j Pink 100 / Box j Yellow 100 / Box j Burnt Orange 100 / Box j Lavender 100 / Box j Tan 100 / Box j Aqua 100 / Box j Gold 100 / Box j Shandon Microscope Slide Dispenser Holds 72 slides. Easy way to get a clean, fingerprintfree slide. Avoid breakage. Loading is simple. Made from stainless steel. Includes suction cup feet to keep the unit in place. Pkg/Qty Shandon Microscope Slide Dispenser Each 141 See Shandon Laser MicroWriter on page 61. SHANDON COLORMARK White 144 / Pk. B Blue 144 / Pk. B BL Green 144 / Pk. B GR Pink 144 / Pk. B PK Yellow 144 / Pk. B YW Burnt Orange 144 / Pk. B BO Lavender 144 / Pk. B LV Tan 144 / Pk. B TN Aqua 144 / Pk. B AQ Gold 144 / Pk. B GL Strawberry Red 144 / Pk. B RD

72 70 Shandon Colormark Slides COLORMARK Slides are designed for the Shandon MicroWriter Slide Labeler. A contrasting color is printed on the back of the Colorfrost end (see chart below) so that patient or specimen information etched through the painted end on the front is clearly visible. These slides are also available with positively charged Colorfrost Plus adhesion coating for better specimen mounting. Colorfrost End Tan Gold Green Pink Aqua Yellow Blue Lavender Burnt Orange Red Contrasting Color Black Black Dark Green Dark Pink Black Dark Pink Dark Blue Black Black Black SHANDON COLORMARK White 1440 / Cs. B CS Blue 1440 / Cs. B BLCS Green 1440 / Cs. B GRCS Pink 1440 / Cs. B PKCS Yellow 1440 / Cs. B YWCS Burnt Orange 1440 / Cs. B BOCS Lavender 1440 / Cs. B LVCS Tan 1440 / Cs. B TNCS Aqua 1440 / Cs. B AQCS Gold 1440 / Cs. B GLCS Strawberry Red 1440 / Cs. B RDCS SHANDON COLORMARK PLUS j White 144 / Pk. j B Blue 144 / Pk. j B BL Green 144 / Pk. j B GR Pink 144 / Pk. j B PK Yellow 144 / Pk. j B YW Burnt Orange 144 / Pk. j B BO Lavender 144 / Pk. j B LV Tan 144 / Pk. j B TN Aqua 144 / Pk. j B AQ Gold 144 / Pk. j B GL Strawberry Red 144 / Pk. j B RD Custom-Made Imprints (Order no. upon request) All slides are available with imprints of hospital and institutional names per the following specifications: Maximum of 17 characters per line; can be letters or numbers. If printing 2 lines, letter size is.059 (approximately a 5 point font). If printing 3 lines, letter size is still.059, but the Superfrost end is reduced by.08". Normally, lines are printed just below the Superfrost area. They can be printed on top of the slide, but the Superfrost end will be lowered. SHANDON COLORMARK PLUS j White 1440 / Cs. j B CS Blue 1440 / Cs. j B BLCS Green 1440 / Cs. j B GRCS Pink 1440 / Cs. j B PKCS Yellow 1440 / Cs. j B YWCS Burnt Orange 1440 / Cs. j B BOCS Lavender 1440 / Cs. j B LVCS Tan 1440 / Cs. j B TNCS Aqua 1440 / Cs. j B AQCS Gold 1440 / Cs. j B GLCS Strawberry Red 1440 / Cs. j B RDCS Histology Cassettes and Slides Microscope Slides

73 71 Slide and Cassette Archiving and Storage Histology Archiving and Storage Microscope Slide Storage Shandon Slide File Storage System Holds 3" x 1" (75 x 26 mm) slides. Stores up to 100 slides (one per slot), 200 slides (2 per slot), or 400 slides (slide tray removed). Stackable for space efficient storage. Transparent hinged cover. Numbered slots for easy identification. Six drain holes provide complete emptying of any liquid in tray. Pkg/Qty Shandon Slide File System, Blue Each B BL Shandon Slide File System, Green Each B GR Shandon Slide File System, Gray Each B GY Shandon Slide File System, White Each B WH Shandon Slide File System, Yellow Each B YW Shandon Wooden Slide File Storage Box Two styles; both accommodate up to 100 slides. Box size 7.5 x 8.5 (190 x 216 mm). Box 1602 is 1.6 (41 mm) high to hold 75 x 26 mm slides. Box 1601 is 2.4 (60 mm) high to store both 75 x 26 mm and 75 x 52 mm slides. Made of finished wood with brass hinges and clasps. Pkg/Qty Shandon Wooden Slide Storage Box, 60 mm Each 1601 Shandon Wooden Slide Storage Box, 41 mm Each 1602 Shandon Plastic Slide Boxes Three styles 25, 50 or 100 slide capacity. Made from extremely durable ABS plastic. Red, white or blue boxes are cork-lined. Requires minimal storage space. Index card fits in lid to record slide titles. Numbered slots on box correspond to lid index. Lids separate from box on 25- and 50-slide boxes. 50-slide box has plastic latch; 100-slide box has hinged lid with metal clasp. 25-slide capacity closed size: 5.5" x 3.375" x 1.25" (9.5 x 8.3 x 3.8 cm). 50-slide capacity closed size: 8.25" x 3.375" x 1.25" (21 x 8.5 x 3 cm). 100-slide capacity closed size: 8.25" x 6.375" x 1.25" (21 x 16 x 3 cm) Pkg/Qty Shandon Slide Box, 25 slides, White Each B1780 Shandon Slide Box, 25 slides,red Each B1781 Shandon Slide Box, 25 slides, Blue Each B1782 Shandon Slide Box, 50 slides, White Each B1783 Shandon Slide Box, 50 slides, Red Each B1784 Shandon Slide Box, 50 slides, Blue Each B1785 Shandon Slide Box, 100 slides, White Each B1786 Shandon Slide Box, 100 slides, Red Each B1787 Shandon Slide Box, 100 slides, Blue Each B1788 See Shandon Microscope Slide Dispenser on page 69.

74 72 Shandon Plastic Slide Folders Shandon Cardboard Slide Folders Variety of colors for easy color-coding of slides. Holds up to twenty 3" x 1" slides. Transparent top. Stackable. 10 folders per case. Pkg/Qty Shandon Plastic Slide Folders, Blue 10 / Cs. B BL Shandon Plastic Slide Folders, Green 10 / Cs. B GR Shandon Plastic Slide Folders, Gray 10 / Cs. B GY Shandon Plastic Slide Folders, White 10 / Cs. B WH Shandon Plastic Slide Folders, Yellow 10 / Cs. B YW Shandon Slide Mailers and Envelopes Plastic mailer holds five slides in a strong, single-piece design with built-in slide separators and a hinged, tight-fitting lid. Sturdy cardboard mailers available for one or two slides. Pkg/Qty Shandon Slide Mailer, Plastic 12 / Pk slide capacity Shandon Slide Mailer, Cardboard 12 / Pk slide capacity Shandon Slide Mailer, Cardboard 12 / Pk slide capacity Holds 3" x 1" (75 x 26 mm) microscope slides. Made from heavy, reinforced cardboard. Available in 20, 30, or 48 slide capacity. 20 slide closed size: 8 x 13.5 (20.3 x 34.3 cm). 30 slide closed size: x 13 (28.3 x 34.3 cm). 48 slide closed size: x 16 (39 x 40.6 cm). Pkg/Qty Shandon Cardboard Slide Folders, 20 Slides Each 1604 Shandon Cardboard Slide Folders, 30 Slides Each 1606 Shandon Cardboard Slide Folders, 48 Slides Each 1607 Shandon Stackable Slide Storage Cabinet Holds up to 5,000 standard 75 x 26 mm microscope slides. Six-cell metal unit is finished in beige baked enamel. Unit is sold complete with drawers. Cabinets lock together when stacked. Metal base (ordered separately) is mounted on four rubber feet to protect bench surfaces and floors. Measures 20.5 x 16.5 x 6 (51.1 x 41.9 x 15.2 cm). Pkg/Qty Shandon Slide Storage Cabinet Each Shandon Slide Storage Cabinet Base Each Foam Dividers for Slide Drawers 12 / Pk. B Histology Archiving and Storage Microscope Slide Storage

75 73 Shandon Microscope Slide Cabinet Shandon Slide and Paraffin Block Cabinet Histology Archiving and Storage Cabinet includes 36 steel, warp-resistant drawers that archive up to 9000 standard 3" x 1" (75 x 26 mm) slides. Steel construction with gray hammertone baked enamel finish. Each drawer holds 250 slides maximum and 80 slides spaced. Locking studs allow secure stacking of up to five cabinets in one square foot (0.093 m 3 ) of floor space. Uses the same base as cabinet and cabinet All cabinets are interstackable. Unit measures x x (31.4 x 33.7 x cm) and may be purchased separately. Extra drawers measure x x 3.75 (31.1 x 3.8 x 9.5 cm) and may be purchased separately. Base measures x 17 x 8.75 (36.5 x 43.2 x 22.2 cm). Pkg/Qty Shandon Microscope Slide Cabinet Each 1205 Drawers included Extra Steel Drawers Each 1206 Steel Base Each 1201 Versatile drawers accommodate a variety of slides and paraffin blocks. All-steel construction; fire resistant. Cabinet holds 3" x 1"(75 x 26 mm) slides. Cabinet has deeper drawers for 3" x 2"(75 x 50 mm) lantern slides. Locking studs allow secure stacking of up to five cabinets in one square foot (0.093 m 3 ) of floor space. Finished in gray hammertone baked enamel. Dustproof and rustproof. Slide and Block Cabinet measures 15 x 16 x 9 (38.1 x 40.6 x 22.8 cm). Slide Cabinet measures x 14.9 x (40 x 37.8 x 47.6 cm). Pkg/Qty Shandon Microscope Slide Each and Paraffin Block Cabinet Drawers not included Shandon Microscope Slide Cabinet Each Drawers not included Steel Base Each 1201 Cabinets and Drawers Cabinet / Accessory Matching Chart C A B I N E T Drawer 1206 HOLDS 36 Drawer 1210 HOLDS 10 Drawer 1212 HOLDS 6 Drawer 1250 HOLDS 10 HOLDS 10 Drawer 1276 HOLDS 10 Base 1201 HOLDS 1 HOLDS 1 HOLDS 1

76 74 Shandon Microscope Slide Trays Holds 240 slides in heavy-gauge steel finished in glossy gray enamel. Aluminum slide holders have permanent numbers. Tray 1210 holds 3" x 1" (75 x 26 mm) slides and measures x 11 x (31.1 x 27.9 x 3.8 cm). Tray 1210 fits Cabinet and Cabinet Tray 1212 holds 3" x 2" (75 x 50 mm) slides and measures x 11 x (31.1 x 27.9 x 6 cm). Tray 1212 fits Cabinet Pkg/Qty Shandon Microscope Slide Tray Each 1210 Holds 3 x 1 slides; fits cabinet and Shandon Microscope Slide Tray Each 1212 Holds 3 x 2 slides; fits cabinet Shandon Paraffin Block Drawers Made from white cartonboard with permanently attached metal drawer pulls securely mounted to front. Drawer 1250 fits Cabinet 1225 and Cabinet Drawer 1250 measures x x 1.25 (27.3 x 32.4 x 3.2 cm). Drawer 1276 fits Cabinet Drawer 1276 measures 10 x 12.5 x 1.75 (25.4 x 31.8 x 4.5 cm). Pkg/Qty Shandon Paraffin Block Drawer Each 1250 for cabinet 1225 and Shandon Paraffin Block Drawer Each 1276 for cabinet 1275 Shandon Paraffin Block Cabinet Shell is made of steel. Holds ten 1250 Paraffin Block Drawers (included). Measures 11.5 x 12.5 x 13 (29.2 x 31.8 x 33 cm). Pkg/Qty Shandon Paraffin Block Cabinet Each 1225 Shandon Tissue Cassette Storage Cabinet Holds up to 2000 cassettes. Includes ten fiberboard 1276 drawers. Made from strong, laminated fiberboard. Each drawer has indexing sheet inside lid. Measures 23.4 x 12.5 x 15 (59.4 x 31.8 x 38.1 cm). Pkg/Qty Shandon Tissue Cassette Each 1275 Storage Cabinet Shandon Modular Cassette Storage Drawers Provide permanent storage of up to 165 embedding rings or 250 cassettes per drawer. Interlocking ridges on top and bottom permit stacking to any convenient height. Made from high-impact polystyrene. Identification labels included. Pkg/Qty Shandon Modular Cassette 6 / Cs. B Storage Drawers Histology Archiving and Storage Cabinets and Drawers

77 75 Histology Archiving and Storage Slide and Block Storage Cabinets Shandon Slide and Block Cabinets All units are stackable to form an integrated system. Steel construction. Sealed top and bottom to ensure dust-free storage. Finished in solvent-proof paint. Available in green, blue or two-tone gray. Block Bank Metal Top matches the Slide Safe and Block Bank. Slide Safe contains 14 drawers with a total capacity of 6,000 microscope slides. Slide Safe measures 18.9 x 18.9 x 5.1 (480 x 480 x 130 mm). Block Bank contains 8 drawers with an approximate total capacity of 3,000 blocks. Block Bank dimensions: 18.9 x 18.9 x 10.8 (480 x 480 x 275 mm). Universal Plinth in black metal for Slide Safe and Block Bank. Available Wheeled Plinth capable of supporting up to ten Slide Safes. Pkg/Qty Shandon Slide and Block Storage Cabinet Each Metal Top, Blue Shandon Slide and Block Storage Cabinet Each Metal Top, Two-toned Gray Shandon Slide and Block Storage Cabinet Each Metal Top, Green Shandon Slide and Block Storage Cabinet Each Slide Safe, Blue Shandon Slide and Block Storage Cabinet Each Slide Safe, Two-toned Gray Shandon Slide and Block Storage Cabinet Each Slide Safe, Green Shandon Slide and Block Storage Cabinet Each Block Bank, Blue Shandon Slide and Block Storage Cabinet Each Block Bank, Two-toned Gray Shandon Slide and Block Storage Cabinet Each Block Bank, Green Shandon Slide and Block Storage Cabinet Each Universal Plinth Shandon Slide and Block Storage Cabinet Each Wheeled Plinth Foam Dividers for Slide Drawers 12 / Pk. B Shandon Modular Filing System Each 5-cell cabinet stores up to 4,600 microscope slides, 1, mm slides or 1,000 tissue cassettes. Ideal for a variety of space and storage situations. Holds a combination of microscope slides, tissue cassettes and 35 mm slides in one cabinet. Stackable five-cell unit is made from anodized aluminum for years of dust-free storage. Drawers, base and slide separators are sold separately. Cabinet measures x 14.5 x 4 (58.7 x 36.8 x 10.2 cm). Modular Microscope Slide Drawer measures 24 x 3 x 4 (61 x 7.6 x 10.2 cm). Modular Tissue Cassette Drawer measures 24 x 3 x 4 (61 x 7.6 x 10.2 cm). Modular 35 mm Slide Drawer measures 24 x 3 x 4 (61 x 7.6 x 10.2 cm). Modular Base measures 25 x 15 x 4.5 (63.5 x 38.1 x 11.4 cm). Pkg/Qty Shandon Modular Filing System Each Cell Cabinet Shandon Modular Filing System Each 1771 Microscope Slide Drawer Shandon Modular Filing System Pair 1772 Tissue Cassette Drawer Shandon Modular Filing System Each 1773 Modular Base, 5 Drawer Shandon Modular Filing System Each mm Slide Drawer Foam Dividers for Slide Drawers 12 / Pk. B See Shandon Disposable Cassettes on pages

78 76 Shandon Plastic Block Filing Cabinet Rigid plastic construction provides an attractive and robust structure. Each unit contains six drawers with smooth sliding action. Total capacity of 1500 blocks. Measures 19.7 x 6.3 x 20.5 (50 x 16 x 52 cm). Pkg/Qty Shandon Plastic Block Filing Cabinet Each Divider Tray Each Shandon Cardboard Block Filing Cabinet Provides convenient, inexpensive storage. Contains two drawers with plastic divider trays. Total capacity of 530 blocks. Pkg/Qty Shandon Cardboard Block Filing Cabinet Each Divider Tray Each Shandon Paraffin Block Cartons Made from white cartonboard. All fit inside 1250 Drawer (see page 74). No holds 20 cassette blocks; measures 3.25 x 5.75 x (8.3 x 14.6 x 2.2 cm). No holds 10 cassette blocks; measures x 5.75 x (4.8 x 14.6 x 2.2 cm). No holds 4 cassette blocks; measures 2 x 2.5 x (5.1 x 6.4 x 2.2 cm). Pkg/Qty Shandon Paraffin Block Carton, holds 20 Each 1251 Shandon Paraffin Block Carton, holds 10 Each 1252 Shandon Paraffin Block Carton, holds 4 Each 1253 Shandon Heat-Sealable Polyethylene Bags Especially suited to protect specimens for mailing. Made from heavy duty polyethylene. Heat-sealable to ensure leak resistant storage. Pkg / Qty Shandon Heat-Sealable Poly Bags 100 / Pk x 5 (7.6 x 12.7 cm) Shandon Heat-Sealable Poly Bags 100 / Pk x 11 (10.2 x 27.9 cm) Shandon Heat-Sealable Poly Bags 100 / Pk x 8 (12.7 x 20.3 cm) Shandon Heat-Sealable Poly Bags 100 / Pk x 11 (15.2 x 27.9 cm) Shandon Heat-Sealable Poly Bags 100 / Pk x 16 (22.9 x 40.6 cm) Shandon Hand Sealer for Polyethylene Bags Quickly and simply heat seal polyethylene bags with this compact tool. Equipped with heating elements and thermostats. Long service life. 110V. Dimensions: 6 x 3 x 3 (15.2 x 7.6 x 7.6 cm). Pkg / Qty Shandon Hand Sealer for Poly Bags Each 204 Histology Archiving and Storage Slide and Block Storage Cabinets

79 77 Lab Support Products Histology Shandon High-Capacity Section Dryer Designed to give maximum drying area while taking up the minimum bench space. An optional shelf kit (Order No. B SH) is available to further increase capacity. Air at a digitally controlled temperature is blown up through the base and back of the instrument to effect rapid drying without overheating. The digital controller facilitates accurate and constant temperature control from 40º- 90ºC. The drying chamber is polished stainless steel with an autoclavable drip tray. The air intake has removable filters and external finish is an easy-to-clean epoxy coating. Patented, compact, dual voltage unit. Shandon High-Capacity V, 50/60Hz B Section Dryer V, 50/60Hz B Accessory Shelf B SH Physical Specifications Dimensions (H x W x D) Internal: 7.68 x 17.2 x (19.5 x 43.7 x cm) External: x x 12.2 (36.8 x 46.7 x 31 cm) Weight lbs. (13.9 kg) Lab Support Products Shandon Section Dryer Shandon Section Dryer V, 50/60Hz V, 50/60Hz Compact instrument that quickly dries racks of slides using a stream of warm air. Selectable air temperature from ambient to 70 C allows efficient drying of slides. Hinged lid allows warm air to escape via spaces on either side. The lid and chamber lining are made from polished stainless steel for easy cleaning. Controls are located on top to protect them from moisture when the lid is open. Deep chamber holds large slide racks such as those in the Shandon Varistain Racks containing slides are placed on a grill in the glass-fronted chamber. Physical Specifications Dimensions (H x W x D) External: 5.07 x 11.2 x 9.64 (12.9 x 28.5 x 24.5 cm) Chamber: 4.25 x x 3.14 (10.8 x 26 x 8 cm) Weight 9 lbs. (4.1 kg) Shandon Histobath 2 Prevents the development of microscopic ice crystals and sample distortion caused by hyperosmolar tissue samples that are slowly frozen in a cryostat. Excellent method for snap-freezing tissue for enzyme assay. Tissue freezes through transfer of heat from the tissue to the working fluid in the chamber. Slide Dryers Shandon Histobath V, 60Hz V, 50Hz Stainless steel mesh basket makes immersion quick and neat. Uses a CFC-free refrigerant and has stable temperature control. Physical Specifications Dimensions (H x W x D) External: x x 13.5 (38 x 24 x 34 cm) Bath Work Area: 4 Dia. x 5 Deep (10.2 x 14 cm) Weight 55 lbs. (25 kg) Bath Volume 33.8 oz. (1 L)

80 78 Shandon Cold Plate Features a large, compressor-cooled plate with removable drip tray that quickly cools molten wax in specimen cassettes. Surface temperature of the plate will reach a temperature as low as -8 C. Easy to read digital thermostat controls the unit. Use to keep blocks cold while sectioning. Shandon Cold Plate V, 50/60Hz B V, 50/60Hz B Shandon Mini Hotplate Shandon Mini Hotplate V, 50/60Hz V, 50/60Hz Shandon Slide Drying Hotplate Shandon Slide Drying Hotplate V, 50/60Hz V, 50/60Hz Physical Specifications Dimensions (H x W x D) 9.3 x 18.4 x 23.6 (23.5 x 46.7 x 60 cm) Weight 35.2 lbs. (16 kg) Used in histology for removing stubborn wrinkles from sections and for reorientating embedded tissue. Can be used to heat-fix bacterial smears while avoiding cell damage through overheating in microbiology applications. Manufactured to operate over a fixed temperature range of C. Lower casing is made from stainless steel; top is matte-black epoxy-coated aluminum. Physical Specifications Dimensions (H x W x D) External: 2.36 x 5.78 x 5.78 (6 x 14.7 x 14.7 cm) Heated Area: 5.5 x 5.5 (14 x 14 cm) Weight 1.21 lbs. (0.55 kg) Thermostatically controlled and designed with a large capacity surface to quickly evaporate water and solvents from slides and mounting media. Also used for warming wax-embedded specimens and for hot staining procedures. Slides rest above the surface of the hotplate to accelerate drying. Top has a matte-black epoxy coating, providing visual contrast against the wax sections; lower casing is finished in an epoxy coating. The controls are at the front of the hotplate and are recessed for protection. Thermostat dial allows selection of operating temperatures in 40 to 95 C range. Physical Specifications Dimensions (H x W x D) 3.34 x 11.6 x 17.7 (8.5 x 29.5 x 45 cm) Weight 6.39 lbs. (2.9 kg) Histology Lab Support Products Hot and Cold Plates

81 79 Shandon Cytospin 4 Cytocentrifuge The ultimate thin-layer cell preparation system. Cytology Cytocentrifuge Safe and Reliable The Shandon Cytospin is designed to protect the operator before, during and after sample preparation. Safety is our top priority. The ability to load the Shandon Cytospin Sealed Head in a microbiological cabinet is the ultimate safety procedure. Auto-locking, plastic outer lid Autoclavable Sealed Head Disposable sample chambers with caps Safety alarms that protect users and specimens Wipe-clean control panel The Shandon Cytospin has been synonymous with cytocentrifugation for over 35 years. More than 15,000 laboratories worldwide use this simple, reliable instrument. It provides economical thin-layer preparations from any liquid matrix, especially hypocellular fluids such as spinal fluids and urines. Features Process 12 specimens at one time. Accepts all protocols from Shandon Cytospin 1, 2, and 3. Redesigned Lid-release Mechanism allows for one-handed opening and closing of the outer lid for easy access. As an added safety measure, the Shandon Cytospin will only operate when the lid is locked into position. The lid remains locked at all times during rotation. The polycarbonate window allows the operator to see the Sealed Head during cytocentrifugation. Excellent safety design prevents accidental fluid spillage from damaging the mechanical or electronic components and allows for easy disinfecting. It meets stringent IEC standards for centrifuge safety. Pull-out Program Card allows for up to nine programs to be logged for fast and convenient retrieval (erasable ink pen included). Shandon Cytospin Sealed Head Shandon Cytospin 4 One Sealed Head is included with the Cytospin, but many laboratories shorten preparation time by having a second Sealed Head ready for when the first finishes processing. Autoclavable, 12-chamber Head seals completely. Pkg/Qty Shandon Cytospin Sealed Head Each

82 A B Shandon Cytospin 4 Specifications Shandon Cytospin 4 with Starter Kit* A without Starter Kit A * Starter Kit includes an assortment of EZ Funnels and Cytoslides (see pages 81-82, 85). 80 A In Load Position (Stopped) B In Operation (Spin) Simple Principle for Excellent Presentation Using centrifugal principles, the Shandon Cytospin deposits cells onto a clearly-defined area of a glass slide and allows for the absorption of the residual fluid into the sample chamber s filter card. Cytocentrifugation also constructively flattens cells for excellent nuclear presentation. During operation, the instrument s spinning action tilts the Shandon Cytofunnels upright and centrifuges cells onto the deposition area of the slide, giving all cell types equal opportunity for presentation. In the Load or Stop position, this unique tilting feature reduces cell loss by preventing residual fluid from coming into contact with the prepared slide. Simple and Precise Controls Protected Program Memory stores up to 23 routines for instant recall and protects from power loss. Program Key Pad has easy-touch design that allows for easier keystrokes and more intuitive programming. Speed window displays the programmed spinning speeds from rpm. Three Acceleration Control buttons allow the operator excellent flexibility and exceptional protection for fragile samples. Physical Specifications Dimensions (H x W x D) With Closed Lid: 9.5 x 16 x 24.5 (24 x 40.5 x 62 cm) With Opened Lid: 25 x 16 x 24.5 (62.5 x 40.5 x 62 cm) Weight 26.5 lbs. (12 kg) Power Requirements VAC, 50/60 Hz, 1 Ph, 150 VA Max Included with Product* Sealed Head/Rotor Each Marking Pen Each AP14891 Operator Manual (specify language) Each A Service Record Book Each A Standard Workflow Diagram Each A * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Additional Accessories Service Manual Each A Sealed Head Seals 3 / Pk Disposable Shandon EZ Cytofunnels See pages Glass Microscope Slides See page 85 Agency Approvals IEC 61010, CSA, UL, and CE Mark (IVDD compliant). Time window displays the programmed and remaining run time from 1 99 minutes. Control feature has a standby power saving mode. Displays are also turned on and off by the standby key. Safety Alarms include an audible alarm that signals the operator if the Shandon Cytospin is out of balance, outside the speed tolerance, or if the lid is not properly locked. As an extra measure of safety for the user, the unit will not spin if the lid is not locked. Specimen safety alarm feature has been added to remind users at one-minute intervals to remove specimens, protect them from air-drying and ensure consistent results. Cytology Cytocentrifuge Shandon Cytospin 4

83 81 Cytology Shandon EZ Cytofunnel Sample Chambers No more Clips!! Intended for single use with all Shandon Cytospin Cytocentrifuge applications. Simple and easy to use operation illustrations are included in the package. Optimizes cell yield. Safe reduces the risk of exposure to pathogenic samples. Disposable eliminates time-consuming decontamination and cleaning. Decreases the possibility of cross-contamination. Eliminates the need for metal Shandon Cytoclips. Closure caps provided with kit. Produces more cost-effective thin-layer preparations when compared to other thin-layer methods. Cytopreparation Shandon EZ Megafunnel Shandon EZ Cytofunnels Designed for convenient preparation of larger volume samples. Shandon Cytofunnels designed for spinning large samples up to 6 ml. Minimizes the need to pre-centrifuge. Cell deposition area of 22 x mm (325 mm 2 ) for increased cell yield. Shandon Megafunnel Cytoslides included. Can prepare both air-dried and fixed preparations, providing additional valuable diagnostic information. Pkg/Qty Shandon EZ Megafunnel 25 / Box A With Caps And Slides

84 82 Shandon EZ Single Cytofunnel with White Filter Cards Shandon EZ Single Cytofunnel with Brown Filter Cards Shandon EZ Double Cytofunnel Disposable Sample Chambers with White Filter Cards. Use for sample volumes up to 0.5 ml. Cell deposition area of 6 mm in diameter (28 mm 2 ). Pre-attached white filter card for high absorbency. Pkg/Qty Shandon EZ Single Cytofunnel 50 / Box A With White Filter Cards and Caps Disposable Sample Chambers with Brown Filter Cards. Use for sample volumes of 0.4 ml or less. Cell deposition area of 6 mm in diameter (28 mm 2 ). Pre-attached brown filter card for slower absorbency. Excellent for scanty specimens such as CSF. Pkg/Qty Shandon EZ Single Cytofunnel 50 / Box A With Brown Filter Cards and Caps Disposable Sample Chambers. Allows 2 sample deposition areas on a single slide. Double the number of sample presentations per run. Funnel markings correspond to slide markings for simple identification. Pre-attached filter card. Cytology Cytopreparation Shandon EZ Cytofunnels Pkg/Qty Shandon EZ Double Cytofunnel 50 / Box A With White Filter Cards and Caps

85 83 Cytology Consumables Shandon Cytospin Collection Fluid CytoRich Red Collection Fluid (Concentrated Formula) Cytology Cytopreparation Collection Fluids Ready-to-use alcohol/carbowax (PEG) combination for direct specimen collection and fixation. Permits storage of specimens or unstained slides for weeks without adverse effect. Packaged in several forms, including convenient pump bottle and pre-filled specimen cups. Pkg/Qty Shandon Cytospin 3.8 L x 1 (with pump) Collection Fluid Shandon Cytospin 500 ml x Collection Fluid Shandon Cytospin 10 L x Collection Fluid Shandon Cytospin 120 ml Cups, filled to 60 ml, 125 / Cs Collection Fluid Shandon Cell-Fixx Spray Fixative Spray fixative for convenient preparation of slides. Includes CARBOWAX which coats the smear to maintain cellular detail. Prevents air drying artifact and cell loss. Pkg/Qty Shandon Cell-Fixx 50 ml Pump Spray Bottle x See Shandon Slide Stainers on pages Ready-to-use alcohol-based fluid. Lyses RBC s and solubilizes proteins. Compatible with immunohistochemistry. Pre-filled containers available. Pkg/Qty CytoRich Red 3.8 L x 1 B Collection Fluid CytoRich Red 500 ml x 2 B Collection Fluid CytoRich Red 20 ml Cups, filled to 10 ml, 180 / Cs. B Collection Fluid CytoRich Red 120 ml Cups, filled to 60 ml, 125 / Cs. B Collection Fluid Shandon Mucolexx Ready-to-use mucoliquifying preservative. Liquefies (with agitation) mucoid cytology specimens. Maintains cellular detail. Short term preservation of specimens. Pkg/Qty Shandon Mucolexx 3.8 L x Shandon Mucolexx 500 ml x Shandon Mucolexx 120 ml Cups, filled to 60 ml, 50 / Cs

86 Shandon Cytology Stains Biological Stain Commission Certified Dyes. 84 Shandon EA-50 Shandon OG-6 Polychromatic cytoplasmic stain. Clearly differentiates cellular components with pink, green, and blue-green hues. Pkg/Qty Shandon EA-50 4 L x Shandon EA-50 1 L x Shandon EA-65 Polychromatic cytoplasmic stain. Lower concentration of Light Green improves expression of eosin-stained components. Ideal for thicker non-gyn preparations. Pkg/Qty Shandon EA-65 4 L x Shandon EA-65 1 L x Shandon Cytology Spatula Economical. Designed with classic Ayre end and tapered tip. Made from smooth, select wood for good cell retention and release. Pkg/Qty Shandon Cytology Spatula 1000 (40 Bags x 25) Demonstrates keratin in cytoplasm. Pkg/Qty Shandon OG-6 4 L x Shandon OG-6 1 L x Shandon Kwik-Diff Stains Fast 3-step differential stain for cytologic preparations, FNA s and microorganisms such as Helicobacter pylori. A quick alternative to traditional Wright s and Giemsa Staining procedures. Kit Components: Reagent 1: Fixative Reagent 2: Eosin Reagent 3: Methylene Blue Available in kit form or as individual components. Pkg/Qty Shandon Kwik-Diff Stain Kit 500 ml Reagent Size Shandon Kwik-Diff Stain Kit 125 ml Reagent Size Shandon Kwik-Diff Reagent 1 4 L x Fixative Shandon Kwik-Diff Reagent 2 4 L x Eosin Shandon Kwik-Diff Reagent 3 4 L x Methylene Blue Cytology Cytopreparation Stains

87 85 Shandon Cytoslides Cytology Specially marked Slides for the Shandon Cytospin. Specimen area is outlined for rapid location during screening. All slides are 75 x 25 mm, made from highquality optical glass. Coated Slides Eliminates the need for albumin coating procedures. Saves labor and resource time. Eliminates background staining on albuminized, IHC or ISH processed slides. Shandon Double Cytoslides Specially made for use with Shandon EZ Double Cytofunnel Chambers. Each specimen is displayed onto the slide within a circle marked 1 or 2 which corresponds with the Shandon EZ Double Cytofunnel chamber. Pkg/Qty Shandon Cytoslide, 100/box Double Circle, coated Shandon Cytoslide, 100/box Double Circle, non-coated Cytopreparation Shandon Single Cytoslides Shandon Mask Cytoslides Cytoslides Specially made for use with Shandon EZ Single Cytofunnels. A white, 12 mm diameter circle on the slide defines the area where cells will be displayed to allow for efficient and rapid location. Uncoated slides available with circle on front or back. Pkg/Qty Shandon Cytoslide, Single Circle 100/box coated circle on back Shandon Cytoslide, Single Circle 100/box non-coated circle on back Shandon Cytoslide, Single Circle 100/box non-coated circle on front Specially produced for immunofluorescence. Black-coating masks out UV light so that only the specimen within the circle can be viewed through a microscope. Pkg/Qty Shandon Cytoslide, 100/box Single Circle, Black mask Shandon Cytoslide, 100/box B Double Circle, Blue mask See Shandon Glass Slide Markers on page 46.

88 Precision Durafuge 100 * Pre-centrifugation for cytocentrifugation. *AVAILABLE IN UNITED STATES ONLY. 86 Precision Durafuge V, 60 Hz B Includes 6 x 50 ml Angle Rotor Precision Durafuge Centrifuges provide performance at a reasonable price. The Durafuge 100 spins swing-out rotors at 4,000 rpm and fixed-angle rotors up to 6,300 rpm, and controls temperature increases to a max of 10 C over ambient temperature. Compact size. Maintenance-free induction drive motor. Quiet operation; sound level never exceeds 57 dba. Reliable, effective, sample separations. Digital set-point and display. OSHA approved safety features. Certified accessories Aerosol-tight accessories are certified by CAMR- Porton down. Digital set point control system minute timer with hold feature. Hard and soft acceleration. Hard and soft braking. Physical Specifications Dimensions (H x W x D) 11 x 14.6 x 18.1 in. (23 x 37 x 46 cm) Weight 61.7 lbs. (28 kg) Power Requirements 120V, 150W, 2.5A Maximum Speed Swing-Out Rotor 4,000 RPM (2,647 x g) Angle Rotor 6,300 RPM (3,661 x g) Maximum Capacity Swing-Out Rotor 4 x 135ml Angle Rotor 20 x 1.5ml Precision Durafuge 100 Rotors and Inserts Capacity Tube Maximum Max RPM Angle Order Dimensions Radius (mm) Max RCF Deg Number 4 x 135ml 4 x 135 ml 44 x 112 mm 148 4, B Swing-Out Rotor 2,647 Sealing Lids 4,000 B Set / 4 2,647 85ml Inserts 4 x 85 ml 38 x 105 mm 148 4, B Set / 4 2,647 50ml Inserts 4 x 50 ml 28.5 x 106 mm 148 4, B Set / 4 2,647 50ml Conical Inserts 4 x 50 ml 29 x 116 mm 148 4, B Set / 4 2,647 15ml Urine Inserts 4 x 15 ml 17 x 105 mm 148 4, B Set / 4 2, ml Conical Inserts 4 x 15 ml 17 x 121 mm 148 4, B Set / 4 2,647 3 x 10ml Vacutainer Inserts 12 x 10 ml 16 x 100 mm 148 4, B Set / 4 2,647 4 x 7ml Vacutainer 16 x 7 ml 13 x 100 mm 148 4, B (w/ or w/o Hemogard) Inserts - Set / 4 2,647 4 x 5ml Vacutainer 16 x 5 ml 13 x 75 mm 148 4, B (w/ or w/o Hemogard) Inserts - Set / 4 2,647 7 x 5 ml Inserts 28 x 5 ml 12 x 75 mm 148 4, B Set / 4 2,647 7 x 3ml Vacutainer Inserts 28 x 3 ml 11 x 70 mm 148 4, B Set / 4 2,647 6 x 50ml Angle Rotor 6 x 50 ml 29 x 116 mm 131 5, B for conical tubes 3,661 50ml Inserts 6 x 50 ml 28.5 x 106 mm 131 5, B round bottom - Set / 6 3,661 15ml Insert 6 x 15 ml 17 x 103 mm 131 5, B Set / 6 3,661 15ml Conical Inserts 6 x 15 ml 17x 121 mm 131 5, B Set / 6 3, x 1.5 ml Angle Rotor 20 x 1.5 ml 11 mm diameter 78 6, B ,461 Cytology Pre-centrifugation Precision Durafuge 100

89 87 Shandon PapSpin * Liquid-based gynaecological test system. Probenentnahme *AVAILABLE OUTSIDE NORTH AMERICA ONLY. In the office a simpler process: Cytology Liquid-Based Gynaecological Test Shandon PapSpin The advantages of a liquid-based cytology system for cervical cancer screening: Worldwide, approximately 500,000 new cases of cervical cancer are reported each year with nearly half of the diagnoses resulting in death. Screening with the Pap smear has significantly reduced the mortality rate, but not eradicated it. Studies show that the method of specimen preparation following collection may significantly compromise detection of disease. 1-2 Compared to a conventional smear, the Shandon PapSpin liquidbased cytology system provides greater accuracy, ease of use, and better results every time. Shandon PapSpin advantages: Shandon Cytospin performance and reliability. Economical: low instrument and test cost. Quiet, space-efficient, portable instrument. 100% of collected cells are transferred to the vial. Uniform cell distribution in a thin layer. Easy, efficient specimen preparation. Randomized sample. Batch processing: 12 samples per run. Air drying eliminated. Obscuring factors significantly reduced or eliminated. Additional testing from residual material. Shandon PapSpin vial is labeled with patient identification. Traditional cervical cell collection with "broom" device. Tip deposited in collection vial containing preservative fluid. Vial is sent to lab for processing. In the laboratory an improved process: Using a Shandon EZ Megafunnel Cell Transfer Chamber with Coated Slide, a randomized sample of cells from the collection vial is deposited by cytocentrifugation onto a glass slide. Results in a clearly defined 22 x mm screening area with uniform distribution. Slides are stained with the traditional Papanicolaou method. Shandon CytoCheck * Cell Densitometer Shandon CytoCheck Dünnschichtpräparat Cell densitometer designed to estimate cell concentration. Small, lightweight, and portable. Easy to operate and maintain. Ensures consistent results. Aids in determining appropriate specimen transfer volume. Only to be used in conjunction with the Shandon PapSpin test. Physical Specifications Dimensions (H x W x D) 1.8 x 3.75 x 6 (4.6 x 9.5 x 15 cm) Weight 11.5 oz. (325 g) Power Requirements Requires four (4) user-replaceable 1.5 V AA alkaline batteries. B J Reprod Med Apr; 41(4): Obstet Gynecol Jul; 60(1): 41-5 Agency Approvals CSA NRTL and CE Mark (IVDD compliant).

90 Under the microscope clearly better Shandon PapSpin Preparation 1 (40x) Conventional Pap Smear 1 (40x) 1 Prepared by The Johns Hopkins Medical Center, Dept. of Cytopathology. Shandon PapSpin Specifications Pkg/Qty Shandon PapSpin 100 Tests A Liquid-based Cytology Prep System Each Case Contains: 4 each Shandon PapSpin Specimen Collection Kit with 25 Shandon PapSpin Collection Vials with Fluid 25 Specimen Collection Brushes Specimen Identification Labels 4 each Shandon PapSpin Specimen Processing Kit with 25 Shandon EZ Megafunnels with caps 25 Slides Additional Reagents Shandon PapSpin Collection Fluid 125 ml ml x Agency Approvals CE Mark (IVDD compliant). Shandon PapSpin the best choice for liquid-based Pap tests It s economical: low instrument and test cost. It s easy and efficient: quiet, space saving and portable. It s effective: Batch processing = 12 samples per run. It s compatible: Shandon Cytospin reliability and performance. 88 Cytology Liquid-Based Gynaecological Test Shandon PapSpin

91 89 Shandon Sequenza Immunostaining Center Organized, reliable method for immunostaining. Shandon Sequenza Immunostaining Center Specifications Immunohistochemistry Immunostaining Equipment Shandon Sequenza Uses the Shandon Coverplate system which ensures consistency and excellent staining quality. Allows the user to perform large immunostaining runs (up to 50 slides/run) giving excellent reproduction consistency. Frees considerable technician time for other tasks. Substantial reagent savings in both immunoreagents and buffer rinse compared to other hand-staining methods. Protects tissue specimens from drying artifact. Independent timers for each of the five stations help organize procedures and reduce user error. Shandon Humidity Chamber Sequenza Immunostaining Center Each Physical Specifications Dimensions (H x W x D) 5.75 x 23.6 x 23 (13.6 x 60 x 58.3 cm) Weight 20 lbs. (9 kg) Power Requirements 4 x 1.5V D-Cell Batteries Included with Product* Reagent Trays - 5 supplied See Below Blank Method Cards - 5 / Pk Slide Racks - 5 / Pk. See Below Buffer Bottle ml Disposable Coverplates - 25 / Pk. x 4 supplied See Page 69 Dropper Bottles - 50 / Pk Operator Manual (specify language) * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Slide Rack Holds 10 Shandon Coverplate Assemblies Reagent Trays - each Agency Approvals Designed to meet CE Mark (IVDD compliant). Maintains moist environment during incubation steps. Ideal for most immunostaining procedures as well as other laboratory techniques. Heavy, flanged cover locks in moisture. Durable, clear acrylic chamber will accommodate 3 aluminum slide trays. Two 24-slide acrylic tray spacers with legs are supplied to keep aluminum slide trays separated. Two 20-slide aluminum slide trays supplied. Acrylic slide tray spacers and aluminum trays are also sold separately. Size (H x W x D): 3 x 8 x (7.6 x 20.3 x 35.9 cm). Pkg/Qty Shandon Humidity Chamber Each 197 Aluminum Slide Tray Each 203 Acrylic Tray Spacer Each 198 Acrylic Box Each Acrylic Lid Each Polyethylene Lid for heated incubations Each 10388

92 Shandon Coverplate Technology 90 Shandon Coverplate Technology Slide Buffer Slide and Shandon Coverplate assembly charged with buffer. Empty Well Waste Tray Reagent Two drops of reagent (100µl) dispense into well. Reagent positively displaces buffer by gravity flow. The Shandon Coverplate is a plastic device that fits over a standard microscope slide allowing specimens to be immunostained with a minimum amount of reagent. The Shandon Coverplate system allows liquids to fill the gap between the coverplate and slide. The liquid stays in the gap by capillary attraction until the next reagent is dispensed into the well. Its pressure then causes the previous reagent to be displaced by gravity flow. Frees considerable technician time. Use Shandon Coverplates on the Shandon Sequenza. Reagent is held within gap by surface tension during incubation period. Shandon DynaChrome Dynamic line of chromogens. Chromogens possess a high affinity for their enzyme detection systems. Working chromogens remain stable at ambient temperatures: AEC = 7 days; DAB = 14 days; Fast Red = 24 hours. Quality of stain. High-quality chromogens come standard in all Immunon Detection System kits. Also available as stand-alone DynaChrome Chromogen Systems to complement any detection system. Second application of buffer Buffer Buffer displaces reagent and thoroughly washes specimen. Last 80 µl of buffer is held within gap to keep specimen moist. Eliminates handling of slides between steps. Saves on the use of costly reagents. Allows sections to be placed virtually anywhere on slide. Protects specimen from drying during long incubations. Ensures consistency in staining quality. Pkg/Qty Shandon Coverplates 250 / Cs Shandon Coverplates 50 / Pk Shandon Coverplates 25 / Pk Pkg/Qty Shandon DynaChrome Makes 500 slides AEC Chromogen Kit Makes 2500 slides Makes 5000 slides Shandon DynaChrome 3 ml AEC Chromogen Concentrate 15 ml ml Shandon DynaChrome Makes 500 slides DAB Chromogen Kit Makes 2500 slides Makes 5000 slides Shandon DynaChrome 3 ml DAB Liquid Concentrate 15 ml ml Shandon DynaChrome Fast Red Makes 500 slides Alkaline Phosphatase Substrate System Makes 1000 slides Shandon DynaChrome 8 Tablets Fast Red / Napthol Phosphate 15 Tablets Tablets Immunohistochemistry Immunostaining Coverplates

93 91 Shandon Immunon Detection Systems Immunohistochemistry Available in a variety of kits Shandon Immunon Detection Systems are available in a wide variety of formats (both kits and individual reagents) that will satisfy any immunostaining requirements, including manual staining techniques and automated stainer procedures. The foundation reagent is the universal polyvalent secondary antibody. This unique formulation of antibodies permits the use of many different primary antibodies from a wide range of species utilizing one secondary antibody and one kit system. Streptavidin/biotin technology provides increased sensitivity compared with other conventional immunostaining techniques (i.e., PAP, Direct Methods). Reagents are pre-mixed (excluding the chromogen), quality tested, and performance guaranteed. Most of the other commercially available antibodies will perform well with kits if primary incubation protocols are correctly adjusted. Alkaline Phosphatase Detection System available with DynaChrome Fast Red chromogens. Peroxidase Detection System available with either DynaChrome AEC or DAB chromogen. Tissue Biotin Secondary Antibody Primary Antibody Antigen Streptavidin DynaChrome DAB, AEC, or Fast Red Peroxidase or Alkaline Phosphatase Shandon Immunon Detection Kits OmniTags Kits Shandon Immunon OmniTag Kits Specifications Shandon Immunon OmniTags Peroxidase Kit with DynaChrome AEC Shandon Immunon OmniTags Peroxidase Kit with DynaChrome DAB Shandon Immunon OmniTags Alkaline Phosphatase Kit with DynaChrome FastRed Included with ALL KITS* 8ml Protein Blocking Agent 3 ml Positive Systems Control Antibody 8 ml Polyvalent Secondary Antibody (biotinylated anti-rabbit, mouse and goat) 8 ml Streptavidin-Peroxidase or Streptavidin-Alkaline Phosphatase 8 ml Gill 1 Hematoxylin Counterstain All-inclusive kit system has prediluted reagents; ideal for most lower volume staining situations that demand ease-of-use and quality results. Kit stains up to 80 slides. Chromogen Related Products for Omnitags AEC KITS* 8 ml 3% Hydrogen Peroxide 3 ml DynaChrome AEC Buffer 3 ml DynaChrome AEC Concentrate 8 ml Shandon Gel-Tol Aqueous Mounting Medium Empty Mixing Vial for Chromogens Chromogen Related Products for Omnitags DAB KITS* 8 ml 3% Hydrogen Peroxide 3 ml DynaChrome DAB Buffer 3 ml DynaChrome DAB Concentrate 8 ml Permanent, Resin-Based Mounting Medium Empty Mixing Vial for Chromogens Filtering Droppers - 12 supplied Chromogen Related Products for Omnitags Alkaline Phosphatase KITS* 3 ml DynaChrome Fast Red Buffer DynaChrome Fast Red Chromogen - 12 tablets supplied 8 ml Shandon Gel-Tol Aqueous Mounting Medium Empty Mixing Vial for Chromogens Filtering Droppers - 12 supplied * Contents, Packaging, and Quantities of items listed under Included with All Kits and Chromogen-Related Products are subject to change without prior notice.

94 OmniTags Plus Kits Kwik Kits 92 Provides the convenience and economy of OmniTags combined with increased sensitivity. Kit stains up to 80 slides. Shandon Immunon OmniTag Plus Kits Specifications Shandon Immunon OmniTags Plus Peroxidase Kit with DynaChrome AEC Shandon Immunon OmniTags Plus Peroxidase Kit with DynaChrome DAB Shandon Immunon OmniTags Plus Alkaline Phosphatase Kit with DynaChrome Fast Red Included with ALL KITS* 8ml Protein Blocking Agent 3 ml Positive Systems Control Antibody 8 ml Polyvalent Secondary Antibody (biotinylated anti-rabbit and mouse) 8 ml Streptavidin-Peroxidase or Streptavidin-Alkaline Phosphatase 8 ml Gill 1 Hematoxylin Counterstain Chromogen Related Products for Omnitags Plus AEC KITS* 8 ml 3% Hydrogen Peroxide 3 ml DynaChrome AEC Buffer 3 ml DynaChrome AEC Concentrate 8 ml Shandon Gel-Tol Aqueous Mounting Medium Empty Mixing Vial for Chromogens Related Products for Chromogen Related Products for Omnitags Plus DAB KITS* 8 ml 3% Hydrogen Peroxide 3 ml DynaChrome DAB Buffer 3 ml DynaChrome DAB Concentrate 8 ml Permanent, Resin-Based Mounting Medium Empty Mixing Vial for Chromogens Filtering Droppers - 12 supplied Chromogen Related Products for Omnitags Plus Alkaline Phosphatase KITS* 3 ml DynaChrome Fast Red Buffer DynaChrome Fast Red Chromogen - 12 tablets supplied 8 ml Shandon Gel-Tol Aqueous Mounting Medium Empty Mixing Vial for Chromogens Filtering Droppers - 12 supplied * Contents, Packaging, and Quantities of items listed under Included with All Kits and Chromogen-Related Products are subject to change without prior notice. A higher concentration of reagents decreases incubation times and increases sensitivity. Kit stains up to 80 slides. Shandon Immunon Kwik Kits Specifications Shandon Immunon Kwik Kits Peroxidase Kit with DynaChrome AEC Shandon Immunon Kwik Kits Peroxidase Kit with DynaChrome DAB Shandon Immunon Kwik Kits Alkaline Phosphatase Kit with DynaChrome Fast Red Included with ALL KITS* 8ml Protein Blocking Agent 3 ml Positive Systems Control Antibody 8 ml Kwik Polyvalent Secondary Antibody (biotinylated anti-rabbit, mouse and goat) 8 ml Kwik Streptavidin-Peroxidase or Streptavidin-Alkaline Phosphatase 8 ml Gill 1 Hematoxylin Counterstain Chromogen Related Products for Kwik Kits AEC KITS* 8 ml 3% Hydrogen Peroxide 3 ml DynaChrome AEC Buffer 3 ml DynaChrome AEC Concentrate 8 ml Shandon Gel-Tol Aqueous Mounting Medium Empty Mixing Vial for Chromogensromogen Related Products for Chromogen Related Products for Kwik Kits DAB KITS* 8 ml 3% Hydrogen Peroxide 3 ml DynaChrome DAB Buffer 3 ml DynaChrome DAB Concentrate 8 ml Permanent, Resin-Based Mounting Medium Empty Mixing Vial for Chromogens Filtering Droppers - 12 supplied Chromogen Related Products for Kwik Kits Alkaline Phosphatase KITS* 3 ml DynaChrome Fast Red Buffer DynaChrome Fast Red Chromogen - 12 tablets supplied 8 ml Shandon Gel-Tol Aqueous Mounting Medium Empty Mixing Vial for Chromogens Filtering Droppers - 12 supplied * Contents, Packaging, and Quantities of items listed under Included with All Kits and Chromogen-Related Products are subject to change without prior notice. Immunohistochemistry Shandon Immunon Detection Kits

95 93 MaxiTags Kits CadenzaTags Kits Immunohistochemistry Designed for batch staining (except for the primary antibody step), providing innovative packaging and convenience coupled with quality and economy. Kit stains up to 400 slides. Shandon Immunon MaxiTags Kits Specifications Combination of ready-to-use reagents specially for use with automated and semi-automated stainers. Kit stains up to 300 slides. Shandon Immunon CadenzaTags Kits Specifications Shandon Immunon Detection Kits Shandon Immunon MaxiTags Peroxidase Kit with DynaChrome AEC Shandon Immunon MaxiTags Peroxidase Kit with DynaChrome DAB Included with ALL KITS* 250 ml (concentrate) Protein Blocking Agent 250 ml PB-35 Buffer Concentrate 250 ml MaxiTags Polyvalent Secondary Antibody (biotinylated anti-rabbit, mouse and goat) 10 ml x 5 MaxiTags Streptavidin-Peroxidase Chromogen Related Products for MaxiTags Kits AEC KITS* 15 ml 3% Hydrogen Peroxide 18 ml DynaChrome AEC Buffer 18 ml DynaChrome AEC Concentrate 15 ml Shandon Gel-Tol Aqueous Mounting Medium for Chromogen Related Products for MaxiTags Kits DAB KITS* 15 ml 3% Hydrogen Peroxide 18 ml DynaChrome DAB Buffer 18 ml DynaChrome DAB Concentrate 15 ml Permanent, Resin-Based Mounting Medium * Contents, Packaging, and Quantities of items listed under Included with All Kits and Chromogen-Related Products are subject to change without prior notice. See Shandon Isolator Hydrophobic Marker on page 46. Shandon Immunon CadenzaTags Peroxidase Kit with DynaChromeAEC Shandon Immunon CadenzaTags Peroxidase Kit with DynaChrome DAB Shandon Immunon CadenzaTags Alkaline Phosphatase Kit with DynaChrome FastRed Included with ALL KITS* 30 ml Protein Blocking Agent 30 ml Polyvalent Secondary Antibody (biotinylated anti-rabbit, mouse and goat) 30 ml Streptavidin-Peroxidase or Streptavidin-Alkaline Phosphatase 15 ml Gill 1 Hematoxylin Counterstain Chromogen Related Products for CadenzaTags AEC KITS* 15 ml 3% Hydrogen Peroxide 15 ml DynaChrome AEC Buffer 15 ml DynaChrome AEC Concentrate Related Products for Chromogen Related Products for CadenzaTags DAB KITS* 15 ml 3% Hydrogen Peroxide 15 ml DynaChrome DAB Buffer Concentrate 15 ml DynaChrome DAB Concentrate Chromogen Related Products for CadenzaTags Alkaline Phosphatase KITS* 15 ml DynaChrome Fast Red Buffer DynaChrome Fast Red Chromogen - 30 tablets supplied * Contents, Packaging, and Quantities of items listed under Included with All Kits and Chromogen-Related Products are subject to change without prior notice. See Shandon Secureline Marker II on page 46.

96 94 Economy Pack Starter / Low-Volume User Package Provides the three most used components of immunostaining procedures - Protein Block, Link, and Label - to accommodate higher throughput and greater economy. Kit stains up to 600 slides. Shandon Immunon Economy Pack Specifications Peroxidase Economy Pack Alkaline Phosphatase Economy Pack OmniTags Plus Peroxidase Economy Pack OmniTags Plus Alkaline Phosphatase Economy Pack Kwik Peroxidase Economy Pack Kwik Alkaline Phosphatase Economy Pack Included with ALL KITS* 60 ml Protein Blocking Agent 60 ml Polyvalent Secondary Antibody (biotinylated anti-rabbit, mouse and goat) 60 ml Streptavidin-Peroxidase or Streptavidin-Alkaline Phosphatase * Contents, Packaging, and Quantities of items listed under Included with All Kits are subject to change without prior notice. Contains everything that a new or low-volume user needs to complete immunostaining procedures. To order a complete package, select 1 detection kit and three primary antibodies from the list below. For a complete description of primary antibodies, please see pages Shandon Immunon Starter / Low-Volume Pack Specifications Shandon Immunon Starter / Low Volume Package Included with KIT* Shandon Sequenza Slide Rack Cadenza Buffer Disposable Coverplates - 25 supplied Detection Kit (choose one from list) Primary antibodies (choose three from list) * Contents, Packaging, and Quantities of items listed under Included with Kit are subject to change without prior notice. Detection Kits (choose one) OmniTags with DynaChrome Fast Red OmniTags with DynaChrome AEC OmniTags with DynaChrome DAB OmniTags Plus with DynaChrome Fast Red OmniTags Plus with DynaChrome AEC OmniTags Plus with DynaChrome Fast Red Kwik Kit with DynaChrome Fast Red Kwik Kit with DynaChrome AEC Kwik Kit with DynaChrome DAB Primary Antibodies (choose three) B-Cell - monoclonal Chromogranin - monoclonal Cytokeratin - polyclonal Desmin - polyclonal Epithelial Membrane Antigen (EMA) - monoclonal Glial Fibrillary Acidic Protein (GFAP) - polyclonal Leukocyte Common Antigen (LCA), (CD45) - monoclonal Neurofilament - monoclonal Prostate Specific Antigen (PSA) - polyclonal S polyclonal T-cell - monoclonal Vimentin - monoclonal Immunohistochemistry Shandon Immunon Detection Kits

97 95 Reagents Shandon Immunon Immunohistochemistry Shandon DifTags Direct immunofluorescence primary antibody detection system. Shandon DifTags are primary antibodies that are directly labeled with a fluorescent dye and can be visualized using a fluorescent microscope. Single-layer technique is simple. It uses a protein block, the fluorescently-labeled primary, a rinse step and then coverslipping. These antibodies are generally used with frozen sections or Shandon Cytospin preparations, but may be used on paraffin sections with slight changes in protocol. Convenient sizes are prediluted and provide ample reagent to produce 10 to 20 slides. Specially configured FITC-Protein Blocking Agent and Shandon PermaFluor Aqueous Mounting Medium are included in kit to prevent non-specific fluorescence. Shandon DifTags Kit Included with KIT* FITC Protein Blocking Agent - 6 ml Shandon PermaFluor Aqueous Mounting Medium - 6 ml Primary Antibodies (choose 6 from list below) * Contents, Packaging, and Quantities of items listed under Included with Kit are subject to change without prior notice. Primary Antibodies (choose six) Pkg/Qty IgA-FITC 2 ml IgG-FITC 2 ml IgM-FITC 2 ml IgD-FITC 2 ml IgE-FITC 2 ml IgA, IgG, IgM-FITC 2 ml C1q-FITC 2 ml C3q-FITC 2 ml C4q-FITC 2 ml Fibrinogen-FITC 2 ml Albumin-FITC 2 ml Properdin-FITC 2 ml Kappa-FITC 2 ml Lambda-FITC 2 ml FITC PBA 6 ml PermaFluor 6 ml PermaFluor 30 ml Shandon Supplemental Reagents Positive Controls Pkg / Oty Kappa/Lambda Mix, Detection 3 ml System Antibody Use to test if detection system and/or protocol are working correctly. Vimentin Tissue Processing 3 ml Control Antibody Use with tissue suspected of being over-fixed with formalin. Negative Controls Prediluted to match average antibody concentration. Pkg/Qty Goat Non-Immune Serum 8 ml Mouse Non-Immune Serum 8 ml Rabbit Non-Immune Serum 8 ml Counterstains Pkg/Qty Shandon Gill 1 Hematoxylin 8 ml Shandon Gill 1 Hematoxylin 30 ml Shandon Gill 1 Hematoxylin 250 ml Tissue Conditioning / Blocking Pkg/Qty FITC-Protein Blocking Agent 6 ml (for DifTags) Formulated to minimize background fluorescence. Protein Blocking Agent* 8 ml Protein Blocking Agent * 15 ml Protein Blocking Agent * 30 ml Protein Blocking Agent * 60 ml Protein Blocking Agent * 250 ml Protein Blocking Agent * 2x Concentrate, 250 ml *Excellent general blocking solution to eliminate background staining. Trypsin (Type II) 20 Tablets Digestive Enzyme and Buffer Concentrate Enhances immunoreactivity for more difficult antibodies. Diluents Pkg/Qty Antibody Diluting Medium 30 ml Antibody Diluting Medium 60 ml Streptavidin-Peroxidase 30 ml Diluting Medium General Reagents Pkg / Oty Reagent Alcohol 4 L x % Hydrogen Peroxide 8 ml % Hydrogen Peroxide 15 ml % Hydrogen Peroxide 30 ml

98 Shandon Links and Labels 96 Biotinylated Secondary Antibody (Link) Standard Sensitivity Pkg/Qty Standard Polyvalent 8 ml Secondary Antibody Standard Polyvalent 30 ml Secondary Antibody Standard Polyvalent 60 ml Secondary Antibody Extra Sensitivity Pkg/Qty Omnitags Plus Polyvalent 8 ml Secondary Antibody Omnitags Plus Polyvalent 30 ml Secondary Antibody Omnitags Plus Polyvalent 60 ml Secondary Antibody For Shorter Incubation Times Pkg/Qty Kwik Polyvalent 8 ml Secondary Antibody Kwik Polyvalent 30 ml Secondary Antibody Kwik Polyvalent 60 ml Secondary Antibody For Agitated Batch Mechanisms Pkg/Qty Bulk-Staining Polyvalent 250 ml Secondary Antibody Concentrate Pkg/Qty Concentrated Polyvalent 1 ml Secondary Antibody (dilute as needed) For Use on Animal Tissue Pkg/Qty Monovalent Anti-Mouse 30 ml Secondary Antibody Monovalent Anti-Rabbit 30 ml Secondary Antibody Monovalent Anti-Goat 30 ml Secondary Antibody Buffers Pkg/Qty Tris Buffer Wash Concentrate 6 x 30 ml (makes 6 L) Tris/Saline Buffer 6 x 30 ml (makes 6 L) Wash Concentrate Phosphate Buffered Saline 6 x 30 ml (makes 6 L) Wash Concentrate PB-35 Protein/Buffer 6 x 30 ml (makes 6 L) Wash Concentrate Cadenza Buffer 6 x 30 ml (makes 6 L) Wash Concentrate Streptavidin-Enzyme Concentrate (Label) Standard Sensitivity Pkg/Qty Standard Streptavidin 8 ml Alkaline Phosphatase Standard Streptavidin 30 ml Alkaline Phosphatase Standard Streptavidin 60 ml Alkaline Phosphatase Standard Streptavidin 8 ml Peroxidase Standard Streptavidin 30 ml Peroxidase Standard Streptavidin 60 ml Peroxidase Extra Sensitivity Pkg/Qty Omnitags Plus Streptavidin 8 ml Alkaline Phosphatase Omnitags Plus Streptavidin 30 ml Alkaline Phosphatase Omnitags Plus Streptavidin 60 ml Alkaline Phosphatase Omnitags Plus Streptavidin 8 ml Peroxidase Omnitags Plus Streptavidin 30 ml Peroxidase Omnitags Plus Streptavidin 60 ml Peroxidase For Shorter Incubation Times Pkg/Qty Kwik Streptavidin 8 ml Alkaline Phosphatase Kwik Streptavidin 30 ml Alkaline Phosphatase Kwik Streptavidin 60 ml Alkaline Phosphatase Kwik Streptavidin Peroxidase 8 ml Kwik Streptavidin Peroxidase 30 ml Kwik Streptavidin Peroxidase 60 ml For Agitated Batch Mechanisms Bulk Staining Streptavidin Peroxidase, makes 10x 300 ml (10 vials with 5 ml concentrate per vial) Concentrate Pkg/Qty Concentrated Streptavidin 1 ml Alkaline Phosphatase (dilute as needed) Concentrated Streptavidin Peroxidase 1 ml (dilute as needed) Immunohistochemistry Shandon Immunon Reagents

99 97 Shandon Immunon Primary Antibodies Immunohistochemistry Shandon Immunon Primary Antibodies Antibody Pre-diluted Pre-diluted Concentrate 3 ml Size 6 ml Size 1 ml Size Actin, Smooth Muscle Specific Monoclonal Mouse anti-human smooth muscle actin Class: IgG2a Clone: 1A4 Specific for alpha actin smooth muscle isoform present in smooth muscle cells. Suggested Control Tissue: Bowel, smooth muscle and vessels Actin, Muscle Specific Monoclonal Mouse anti-human actin Class: IgG1 Clone: HHF35 Reacts with muscle cells in humans as well as a variety of mammalian species. Suggested Control Tissue: Skeletal muscle, other muscle tissue Alpha-1-Antichymotrypsin Polyclonal Rabbit anti-human alpha-1-antichymotrypsin Class: IgG Seen in most histiocytes and macrophages. Suggested Control Tissue: Spleen and lung histiocytes, hepatoma, histiocytoma Alpha-1-Antitrypsin Polyclonal Rabbit anti-human alpha-1-antitrypsin Class: IgG Recognizes alpha-1-antitrypsin in a variety of tissues. Suggested Control Tissue: Spleen and lung histiocytes, histiocytoma, fetal liver Alpha-1-Fetoprotein (AFP) Polyclonal Rabbit anti-human AFP Class: IgG Specific for glycoprotein found in fetal liver; also found in hepatocellular carcinomas and germ cell tumors with yolk sac elements. Suggested Control Tissue: Regenerated fetal liver B-Cell (CD20) Monoclonal Mouse anti-human B-cell Class: IgG2a Clone: L26 Specific for the 33 and 30 kd polypeptide present in most B-cells. Suggested Control Tissue: Spleen, tonsil B-Cell (CD45RA) Monoclonal Mouse anti-human B-cell Class: IgG1 Clone: 4KB5 Broad spectrum marker that will react with the majority of B-cells and a minority of T-cells (MW: 200 and 220kD). Suggested Control Tissue: Spleen, tonsil Calcitonin Polyclonal Rabbit anti-human calcitonin Class: IgG Specific for human thyroid C-cells (MW: 3.5kD). Suggested Control Tissue: Thyroid, medullary carcinoma

100 98 Antibody Pre-diluted Pre-diluted Concentrate 3 ml Size 6 ml Size 1 ml Size Carcinoembryonic Antigen (CEA) Monoclonal Monoclonal Mouse anti-human CEA Class: IgG Clone: B28E6 Recognizes a glycoprotein constituent of glycocalyx of embryonic endodermal epithelium. Suggested Control Tissue: Colon, bowel carcinoma Carcinoembryonic Antigen (CEA) Polyclonal Polyclonal Rabbit anti-human CEA Class: IgG Recognizes human CEA; may also cross-react with NCA antigen. Suggested Control Tissue: Colon, bowel carcinoma Chorionic Gonadotrophin Polyclonal Rabbit anti-human chorionic gonadotrophin Class: IgG Specific for hcg alpha and beta subunits; cross-reacts with 4% of human luteinizing hormone. Suggested Control Tissue: Placenta (first trimester) Chromogranin Monoclonal Mouse anti-human chromogranin A Class: IgG1 Clone: LK2H10 Specific for neuroendocrine cells containing secretory granules. Suggested Control Tissue: Pancreas, pheochromocytoma Cytokeratin, High and Low Molecular Weights (Pan-Keratin) Monoclonal Mouse anti-human cytokeratin Class: IgG Clones: AE1, AE3 Reacts with keratins (MW: 56.5, 50, 48 and 40kD [AE 1]), specifically epidermal basal layer; also reacts with (MW: 68, 65.5, 63, 59, 58, 56, 54 and 52.5kD [AE 3]); (Moll #'s: 1, 2, 3, 4, 5, 6, 7, 8, 10, 14, 15, 16, and 19). Suggested Control Tissue: Skin, prostate, adenocarcinoma Cytokeratin, Low Molecular Weights (Acidic Type I) Monoclonal Mouse anti-human cytokeratin Class: IgG Clone: AE1 Recognizes most acidic keratins (MW: 56.5, 50, 48 and 40kD) (Moll #'s: 10, 14, 15, 16, and 19). Suggested Control Tissue: Skin, prostate, adenocarcinoma, squamous cell carcinoma Cytokeratin, High Molecular Weights (Basic, Type II) Monoclonal Mouse anti-human cytokeratin Class: IgG Clone: AE3 Recognizes all of the known basic keratins (MW: 68, 65.5, 63, 59, 58, 56, 54 and 52.5kD), (Moll #'s: 1, 2, 3, 4, 5, 6, 7 and 8). Suggested Control Tissue: Skin, adenocarcinoma, squamous cell carcinoma Cytokeratin, Ductal and Squamous Epithelium Monoclonal Mouse anti-cytokeratin (high molecular weight) Class: IgG1 Clone: 34BetaE12 Specific mix of the high molecular weight cytokeratins (MW: 68, 58, 56.5, and 50kD), (Moll #'s: 1, 5, 10 and 14). Suggested Control Tissue: Skin, squamous carcinoma, adenocarcinoma (ductal) Immunohistochemistry Shandon Immunon Primary Antibodies

101 99 Immunohistochemistry Shandon Immunon Primary Antibodies Antibody Pre-diluted Pre-diluted Concentrate 3 ml Size 6 ml Size 1 ml Size Cytokeratin 8, 18 and 19 Monoclonal Mouse anti-cytokeratin Class: IgG1 Clone: 5D3 5D3 reacts with most of the keratins expressed in simple epithelia (MW: 52.5, 45, and 40kD) (Moll #'s: 8, 18 and 19). Suggested Control Tissue: Simple epithelia including glandular epithelium in breast, thyroid, GI tract and respiratory tract Cytokeratin (Wide Spectrum) Polyclonal Rabbit anti-keratin (Wide spectrum) Class: IgG Wide spectrum screening keratin (also called pre-keratin); raised from bovine epidermal keratin (MW: 52, 56, 58 and lesser amounts of 48, 51, and 60kD). Suggested Control Tissue: Skin, lung Desmin Monoclonal Monoclonal Mouse anti-human desmin Class: IgG1 Clone: D33 Specific for both striated (skeletal and cardiac) and smooth muscle cells intermediate filament (MW:53kD). Suggested Control Tissue: Bowel (smooth muscle), skeletal muscle, leiomyoma Desmin Polyclonal Polyclonal Rabbit anti-desmin Class: IgG1 Specific for smooth muscle, Z-lines of skeletal muscle and intercalated discs of cardiac muscle. Suggested Control Tissue: Bowel (smooth muscle), skeletal muscle, leiomyoma Epithelial Membrane Antigen (EMA) Monoclonal Mouse anti-ema Class: IgG2 Clone: E29 Recognizes both normal and neoplastic epithelia, and demonstrates variable squamous epithelial stainings. Suggested Control Tissue: Kidney, breast carcinoma Factor VIII Polyclonal Rabbit anti-human factor VIII Class: IgG Specific for human vascular endothelium and megakaryocytes Suggested Control Tissue: Tonsil (vessels) Glial Fibrillary Acidic Protein (GFAP) Monoclonal Monoclonal Mouse anti-gfap Class: IgG Clone: GA5 Intermediate filament protein (MW: 50kD) of glial cells; reacts strongly with human astrocytes, some ependymal cells and developing neoplastic oligodendrocytes. Broad species reactivity. Suggested Control Tissue: Brain, astrocytoma

102 100 Antibody Pre-diluted Pre-diluted Concentrate 3 ml Size 6 ml Size 1 ml Size Glial Fibrillary Acidic Protein (GFAP) Polyclonal Polyclonal Rabbit anti-gfap Class: IgG Reacts strongly with human GFAP and a wide variety of other species. Stains astrocytes, some ependymal cells, Schwann cells. Suggested Control Tissue: Brain, astrocytoma Granulocyte-Associated Antigen (CD15) Monoclonal Mouse anti-human granulocyte-associated antigen Class: IgM Clone: C3D-1 Reacts with the CD15 antigen found on mature granulocytes and Reed-Sternberg cells. Suggested Control Tissue: Tonsil, lymph node Kappa Polyclonal Rabbit anti-human kappa Class: IgG Recognizes both free and bound kappa light chains. Suggested Control Tissue: Tonsil Ki-1 Antigen (CD30)* Monoclonal Mouse anti-ki-1 antigen Class: IgG1 Clone: Ber-H2 Ki-1 antigen reacts with the 595 amino acid transmembrane glycoprotein (MW: 120kD). The CD30 site recognized by Ber-H2 is designated to the short arm of chromosome 1 (position 36). Suggested Control Tissue: Hodgkin s cells and pancreas *The Omnitags Plus and Kwik Kit are the only recommended detection systems for this antibody Lambda Polyclonal Rabbit anti-human lambda Class: IgG Specific for human lambda light chains, both free and bound. Suggested Control Tissue: Tonsil Leukocyte Common Antigen (LCA), (CD45) Monoclonal Mouse anti-human leukocytes Class: IgG1 Clones: PD7/26, 2B11 Recognizes LCA surface antigens. Suggested Control Tissue: Tonsil, lymphoma Macrophage (CD68) Monoclonal Mouse anti-macrophage Class: IgG3 Clone: PG-M1 Reacts with the CD68 glycoprotein antigen (110kD) found in macrophages in a wide variety of tissues. Unlike other CD68 clones, PG-M1 will not react with the granulocytes and their precursor cells. Suggested Control Tissue: Spleen, tonsil, gut and bone marrow Melanoma Monoclonal Mouse anti-melanoma specific antigen Class: IgG1 Clone: HMB45 Reacts with a melanoma-specific cytoplasmic antigen found in melanoma and melanocytic cells, junctional and dysplastic nevi. Suggested Control Tissue: Melanoma Immunohistochemistry Shandon Immunon Primary Antibodies

103 101 Immunohistochemistry Antibody Pre-diluted Pre-diluted Concentrate 3 ml Size 6 ml Size 1 ml Size Myoglobin Polyclonal Rabbit anti-human myoglobin Class: IgG Recognizes human myoglobin of cardiac and skeletal muscle Suggested Control Tissue: Skeletal and cardiac muscle Neurofilament Monoclonal Mouse anti-neurofilament Class: IgG1 Clone: 2F11 Recognizes tissue of neural origin (MW: 70, , 200kD). Will stain certain endocrine tumors with neural differentiation. Wide species cross-reactivity. Suggested Control Tissue: Brain Neuron Specific Enolase (NSE) Monoclonal Monoclonal Mouse anti-human NSE Class: IgG1 Clones: BBS/NC/VI-H14 Recognizes the NSE enzyme present in neurons and neuroendocrine cells. Suggested Control Tissue: Pancreas, brain, intestine (neurons) Shandon Immunon Neuron Specific Enolase (NSE) Polyclonal Polyclonal Rabbit anti-nse Class: IgG Recognizes the NSE enzyme present in humans as well as many other mammalian species. Suggested Control Tissue: Pancreas, brain, intestine (neurons) Prostatic Acid Phosphatase (PAP) Monoclonal Monoclonal Mouse anti-human PAP Class: IgG1 Clone: PASE/4LJ Reacts with human prostatic acid phosphatase (MW: 52kD) as well as non-human primates. Suggested Control Tissue: Prostate Prostatic Acid Phosphatase (PAP) Polyclonal Polyclonal Rabbit anti-human PAP Class: IgG Reacts with the ductal epithelial cells in normal, hypertrophic and neoplastic prostate. Suggested Control Tissue: Prostate Primary Antibodies Prostate Specific Antigen (PSA) Monoclonal Monoclonal Mouse anti-human PSA Class: IgG1 Clone: ER-PR8 Reacts with PSA antigen (MW: 33kD) found in prostatic secretory and ductal epithelium in normal and neoplastic tissue. Suggested Control Tissue: Prostate Prostate Specific Antigen (PSA) Polyclonal Polyclonal Rabbit anti-human PSA Class: IgG Recognizes PSA human ductal epithelium. Suggested Control Tissue: Prostate

104 102 Antibody Pre-diluted Pre-diluted Concentrate 3 ml Size 6 ml Size 1 ml Size S-100 Polyclonal Rabbit anti-s-100 protein Class: IgG Recognizes the S-100 protein alpha and beta subunits in a variety of mammalian species. Suggested Control Tissue: Bowel (nerve), melanoma Synaptophysin Polyclonal Rabbit anti-human synaptophysin Class: IgG Reacts with synaptophysin, hydrophilic peptide sequence (MW: 38kD); membrane component of the locally recycled small synaptic vesicles present in most neurons. Suggested Control Tissue: Adrenal medulla, thyroid, lung and pancreas T-Cell (CD45R0) Monoclonal Mouse anti-human T-cell Class: IgG2A Clone: UCHL1 Pan T-Cell marker (MW:180kd) that recognizes the low molecular weight isoform of the LCA family; stains early T-cells, activated T-cells, and a resting population of T-cells in the CD4 and CD8 subsets (helper/suppressor). Suggested Control Tissue: Tonsil, spleen T-Cell (CD43) Monoclonal Mouse anti-human T-cell Class: IgG1 Clone: DF-T1 Reacts with CD43 (MW: kD) (membrane/cytoplasmic) antigen that is expressed by normal and neoplastic T-cells, activated T-cells and resting population of T-cells of myeloid lineage. Suggested Control Tissue: Tonsil, spleen Thyroglobulin Polyclonal Rabbit anti-human thyroglobulin Class: IgG Reacts with human thyroglobulin; no cross-reactivity noted with serum proteins. Suggested Control Tissue: Thyroid Thyroid Stimulating Hormone (TSH) Polyclonal Rabbit anti-human TSH Class: IgG Specific for TSH (MW: 29kD) in a wide variety of mammalian species; also reacts with LH 4%, hcg 1.5% and < 1% hgh. Suggested Control Tissue: Anterior pituitary Vimentin Monoclonal Mouse anti-vimentin intermediate filaments Class: IgG1 Clone: V-9 Reacts with fibroblast intermediate filament (MW: 57kD) associated with mesenchymal cytoskeleton. Suggested Control Tissue: Kidney, tonsil Immunohistochemistry Shandon Immunon Primary Antibodies

105 103 Shandon Gross-Star Pathology Workstation Organized workstation for the gross examination and sectioning of specimens. Pathology Stainless steel construction. Fixed-height or elevating work surfaces. Hands-free controls. Three efficient ventilation options. Grossing Workstations Shandon Gross-Star Superior Functionality Models with elevating or fixed-height work surface are available. Elevating units have user-adjustable work surface from 33" to 41" (83.8 to cm). Fixed-height units have a work surface that is factory set to your specification from 33" to 41" (83.8 to cm). Deep sink with hot and cold water faucet. 1/2 or 3/4 horsepower disposals are available (please check with local authorities before ordering a unit with a disposal, because some areas prohibit the use of disposals). Hands-free foot pedal controls for cold/hot water faucet, optional dictation system, and optional formalin dispensing system. Abundant light is directed to the work surface. Vacuum breaker-protected water supply. Appliances plug directly into the unit for convenient use. One hospital-grade duplex ground fault circuit interrupter (GFCI) receptacle included on V units. One point-of-use receptacle included on V units. Facility-supplied residual current device (RCD) is required for V units. Two optional tape recording units available. Ventilated base cabinet. Fume removal is efficient and quiet. Optional camera, monitor, and keyboard brackets are available. Monitor bracket is designed to hold a thin flat-screen display monitor. Telescoping arm for the camera slides along the width of the unit. Each unit comes complete with magnetic instrument bar, integral centimeter ruler, paper towel dispenser, and photographic blue polyethylene dissecting board. Built-in manifold rinse washes down wetted internal surfaces quickly. Superior Quality Standard Type 304 or optional Type 316 stainless steel construction. Rugged design provides stability and is built tough to withstand years of heavy work without corrosion.

106 104 Optional dictation system. Optional monitor and keyboard brackets. Three Ventilation System Options Some models feature formaldehyde neutralizing filters and recirculated air. For short distance, external exhaust models are available with filters and an integral blower. Other models connect to the facility remote exhaust system. Designed for Easy Shipping and Installation All Shandon Gross-Star workstations ship in two convenient pieces. Both parts fit through a standard 32" (81.3 cm) doorway. The two halves link firmly with easy-to-assemble plates and fasteners. Connects directly to the facility s hot and cold water supplies and drains. Units are hard wired to the facility s electrical system. Sink, faucet, hand spray, and manual manifold rinse control valve. Recommended Depth from Front of Unit to Wall For the purpose of room planning, backs of fixed-height units can be flush to walls. Elevating units require a slight clearance between the backs of the units and walls to accommodate height adjustment. Standard formalin disposal cup sink and optional formalin dispensing system faucet. R E r Gross-Star Workstation camera bracket and magnetic toolbar. Hands-free foot pedal controls for standard cold/hot water faucet, optional formalin dispensing system, and optional dictation system. Choosing the Exhaust System to Fit Your Lab Recirculating For existing labs or labs without facility exhaust, it may be necessary to filter and recirculate the air. Specify a unit with integral blowers or filters. External Exhaust For distances that do not exceed 20 feet (6.1 m), you may choose a unit with integral blower and filters that may be connected to your facility s duct for venting. Remote Exhaust If your facility can supply an exhaust duct and remote blower system that provides an airflow of 550 to 600 cfm (0.260 to cu. m/s), a ducted unit will best suit your needs. Pathology Grossing Workstations Shandon Gross-Star

107 Shandon Gross-Star Workstation Specifications 105 Shandon Gross-Star Grossing Workstations Pathology Shandon Gross-Star Pathology Workstation Elevating Recirculating V, 60 Hz, 1 Ph B21100 Elevating External exhaust V, 60 Hz, 1 Ph B21101 Elevating Remote exhaust V, 60 Hz, 1 Ph B21102 Shandon Gross-Star Pathology Workstation Elevating Recirculating V, 50/60 Hz, 1 Ph B22200 Elevating External exhaust V, 50/60 Hz, 1 Ph B22201 Elevating Remote exhaust V, 50/60 Hz, 1 Ph B22202 Shandon Gross-Star Pathology Workstation Fixed-Height Recirculating V, 60 Hz, 1 Ph B21103 Fixed-Height External exhaust V, 60 Hz, 1 Ph B21104 Fixed-Height Remote exhaust V, 60 Hz, 1 Ph B21105 Shandon Gross-Star Pathology Workstation Fixed-Height Recirculating V, 50/60 Hz, 1 Ph B22203 Fixed-Height External exhaust V, 50/60 Hz, 1 Ph B22204 Fixed-Height Remote exhaust V, 50/60 Hz, 1 Ph B22205 Included with Product* Type 304 Stainless Steel Tabletop and Panels Downdraft Ventilation Formalin Disposal Cold/Hot Water Faucet (Foot Pedal Controlled) Manually-Controlled Manifold Rinse Hand Spray Electrical Receptacle Glove Dispenser Adjustable Lower/Fixed Upper Shelves Fluorescent Light Magnetic Instrument Bar Towel Bar and Dispenser / Centimeter Ruler Polyethylene Dissecting Board (Photographic Blue) B36115 Ventilated Base Cabinet * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories 1/2 hp Disposal with Rocker Switch B /4 hp Disposal with Rocker Switch B21112 Hood Assembly B21113 Back Draft (no downdraft) B21114 Ventilated Trash Bin (specify left or right side of unit) B21115 Foot Pedal Controlled Formalin Dispensing System B21116 Camera Bracket without Optional Hood Assembly B21125 Camera Bracket with Optional Hood Assembly B21125/B21126 Monitor/Keyboard Brackets B21110 Task Lamp (specify one or two) B Task Lamp with Magnifier (specify one or two) B21118 Movable Requisition Rack Foot Pedal Controlled Dictation Interface and Microphone Assembly B21117 Lanier Voicewriter 160 Series Standard Cassette Recorder Lanier Voicewriter 260 Series Microcassette Recorder Type 316 Stainless Steel Construction Replacement Filters Replacement Filters Includes 2 potassium permanganate filters and 2 fine particle filters R Recirculating Use of Filters is required. E External Exhaust Use Filters if required for application. r Remote Exhaust No Filters are required. Agency Approvals UL / cul ( V only); CE ( V only); CSA NRTL/C (pending) Physical Specifications Dimensions (H x W x D) Overall:* x 60 x 30 ( x x 76.2 cm) *Height is fixed on Fixed-Height units. Work Surface Height:** ( cm) **Customer specified on Fixed-Height units. Right-Hand Sink: 14 x 16 x 7.5 (35.6 x 40.6 x 19.1 cm) Weight Top Piece: Uncrated: 275 lbs. (124.7 kg) Crated: 375 lbs. (170.1 kg) Bottom Piece: Uncrated: 400 lbs. (181.4 kg) Crated: 500 lbs. (226.8 kg) Electrical Specifications Unit is hard wired to facility power V models draw 20 amps and require a separate 15 amp circuit for one hospital-grade duplex ground fault circuit interrupter (GFCI) receptacle V models draw 20 amps including up to 7 amps by the point-of-use receptacle with facility-supplied residual current device (RCD) protection required. Plumbing Specifications 3/4" hot and cold water supply lines with shut off valves and 1 1/2" drain line must be supplied. 1/2" industrial grade flexible hoses with 3/4" female hose fittings are supplied for connection to water supply lines. 1 1/2" I.D. reinforced flexible hose is provided for connection to facility drain line. Validated Exhaust Efficiencies R Recirculating E External* r Remote N/A N/A N/A N/A Recommended Exhaust Airflow Volume cfm ( cu. m/s) Pressure Loss through Unit with standard Downdraft in. w.g. ( cu. mb) N/A Average Capture Velocity with Standard Downdraft at 3" above work surface: fpm ( m/s) fpm ( m/s) fpm ( m/s) Average Capture Velocity with Optional Backdraft at back of work surface: fpm ( m/s) N/A fpm ( m/s) Pressure Loss through Unit with optional Backdraft in. w.g. ( cu. mb) fpm ( m/s) Average Capture Velocity with Optional Backdraft at front of work surface: fpm ( m/s) fpm ( m/s) fpm ( m/s) Average Face Velocity with Optional Hood Assembly: fpm ( m/s) fpm ( m/s) fpm ( m/s) * Data represents units without filters. With filters, external exhaust capture and face velocities are similar to recirculating data.

108 Shandon Gross-Star Pathology Workbench Workbench for the gross examination and sectioning of specimens. 106 Water supply protected by vacuum breakers. Hands-free foot pedal controls to activate cold/hot water faucet and optional formalin dispensing system. Remote exhaust connects to your facility s duct and blower system. Fume removal is efficient and quiet. Appliances plug directly into unit for convenient use. One hospital-grade duplex ground fault circuit interrupter (GFCI) receptacle included on V units. One point-of-use receptacle included on V units. Facility-supplied residual current device (RCD) is required for V units. Standard downdraft or optional back draft design for efficient capture of fumes at the work surface. Flat stainless steel work surfaces include three removable perforated grid plates. Each unit comes complete with an integral centimeter ruler, blue polyethylene dissecting board, and vented base cabinet. Workbenches ship in one convenient piece. Installation is quick and easy. Validated Exhaust Efficiencies r Remote Exhaust Recommended Exhaust Airflow Volume: cfm ( cu.m/s) Pressure loss through unit with Standard Downdraft: in.w.g. ( mb) Pressure loss through unit with Optional Back Draft: in.w.g. ( mb) Average Capture Velocity with Standard Downdraft at 3" above work surface: fpm ( m/s) Average Capture Velocity with Optional Backdraft at back of work surface: fpm ( m/s) Average Capture Velocity with Optional Backdraft at front of work surface: fpm ( m/s) Shandon Gross-Star Workbench Specifications Shandon Gross-Star Pathology Workbench B V, 60 Hz, 1Ph; Remote exhaust via facility-supplied duct and blower Shandon Gross-Star Pathology Workbench B V, 50/60 Hz, 1Ph; Remote exhaust via facility-supplied duct and blower Physical Specifications Dimensions (H x W x D) Overall: x 60 x 30 ( x x 76.2 cm) Work Surface Height: Height is fixed and customer specified. Right-Hand Sink: 14 x 16 x 7.5 (35.6 x 40.6 x 19.1 cm) Weight Unit: Uncrated: 425 lbs. (192.8 kg) Crated: 550 lbs. (249.5 kg) Electrical Specifications Unit is hard wired to facility power V models draw 20 amps and require a separate 15 amp circuit for one hospital-grade duplex ground fault circuit interrupter (GFCI) receptacle V models draw 20 amps including up to 7 amps by the point-of-use receptacle with facility-supplied residual current device (RCD) protection required. Plumbing Specifications 3/4" hot and cold water supply lines with shut off valves and 1 1/2" drain line must be supplied. 1/2" industrial grade flexible hoses with 3/4" female hose fittings are supplied for connection to water supply lines. 1 1/2" I.D. reinforced flexible hose is provided for connection to facility drain line. Included with Product* Type 304 Stainless Steel Construction Downdraft Ventilation Formalin Disposal Cold/Hot Water Faucet (Foot Pedal Controlled) Manually-Controlled Manifold Rinse Hand Spray Electrical Receptacle Centimeter Ruler Polyethylene Dissecting Board B36115 Ventilated Base Cabinet * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories 1/2 hp Disposal with Rocker Switch B /4 hp Disposal with Rocker Switch B21112 Back Draft (No Downdraft) B21114 Ventilated Trash Bin (specify left or right side of unit) B21115 Foot Pedal Controlled Formalin Dispensing System B21116 Task Lamp (specify one or two) B Task Lamp with Magnifier (specify one or two) B21118 Type 316 Stainless Steel Construction Pathology Grossing Workstations Shandon Gross-Star Agency Approvals UL / cul ( V only); CE ( V only); CSA NRTL/C (pending)

109 107 Shandon Grosslab Senior Pathology workstation. Pathology Stainless steel construction. Fixed-height or elevating work surfaces. Hands-free or manual controls. Three efficient ventilation options. Grossing Workstations Shandon Grosslab Senior Three Ventilation System Options Some models feature formaldehyde neutralizing filters and recirculated air. Models that use filters and an integral blower are available for short-distance applications. Other models connect to the facility exhaust system. See the following page for technical information on air processing options. Superior Quality Stainless steel work surfaces and panels. Extruded aluminum frame is designed to distribute weight evenly, stand up to heavy use, resist corrosion, add durability and minimize unit weight. Ships in two easily manageable pieces that fit through standard doorways. Built tough to stand up to years of heavy work without corrosion. Programmability Programmable microprocessor allows clock time to be changed or the filter replacement alarm to be reset. Superior Functionality Models with elevating work surface or with fixed-height work surface are available. Elevating units have a user-adjustable work surface from 33.5" to 45.5" (85.1 to cm). Fixed-height units have a work surface that is factory set to your specification from 33.5" to 45.5" (85.1 to cm). Deep sink with hot and cold water faucet. 1/2 horsepower disposal is standard; optional 3/4 horsepower disposal is available (please check with local authorities before ordering a unit with disposal; some areas prohibit the use of disposals). Hands-free or manual controls for water, disposal, and optional dictation system. Abundant light directed to the work surface. Vacuum breaker-protected water supply. Appliances plug directly into the unit for convenient use. One hospital-grade duplex ground fault circuit interrupter (GFCI) receptacle on V units. Two IEC 320 receptacles on V units. Facility supplied residual current device (RCD) is required for V units. Two optional tape recording units available. Each unit comes complete with a magnetic tool bar, integral centimeter rulers, formalin dispenser, and paper towel dispenser. Built-in table rinse washes down work surfaces quickly. Designed for Easy Shipping and Installation All units ship in two convenient pieces. Both parts fit through a standard 32" (81.3 cm) doorway. The two halves link firmly with easy-to-lock latches. The unit connects directly to the facility s hot and cold water supplies and drain. Units are hard wired to the facility s electrical system.

110 108 Physical Specifications Dimensions (H x W x D) Overall:* x 60 x Varies ( x Varies cm) Width shown in chart at right *Height is fixed on Fixed-Height units. Work Surface Height:** ( cm) **Customer specified on Fixed-Height units. Right-Hand Sink: 14 x 12 x 6 (35.6 x 30.5 x 15.2 cm) Weight Top Piece: Uncrated: 285 lbs. (129.3 kg) Crated: 375 lbs. (170.1 kg) Bottom Piece: Uncrated: 475 lbs. (215.5 kg) Crated: 545 lbs. (247.2 kg) Electrical Specifications Unit is hard wired to facility power V models draw 20 amps and require a separate 15 amp circuit for one hospital-grade duplex ground fault circuit interrupter (GFCI) receptacle V models draw 20 amps including up to 7 amps by the two IEC 320 receptacles with facility-supplied residual current device (RCD) protection required. Plumbing Specifications 3/4" hot and cold water supply lines with shut off valves and 1 1/2" drain line must be supplied. 1/2" industrial grade flexible hoses with 3/4" female hose fittings are supplied for connection to water supply lines. 1 1/2" I.D. reinforced flexible hose is provided for connection to facility drain line. Replacement Filters Replacement Filters R Recirculating Use of Filters is required. E External Exhaust Use Filters if required for application. r Remote Exhaust No Filters are required. Agency Approvals UL / cul ( V only); CE ( V only) Available hands-free controls for hot/cold water faucet, table rinse, and disposal. Table rinse is standard and may be easily activated with handsfree sensors or manual controls. Standard units have 6" (15.2 cm) deep sinks with secondary faucet and strainer for rinsing currettings and other small specimens. Fixedheight units are available with deeper sinks. Call for details. Depth of Shandon Grosslab Units V, Elevating, Recirculating Models V, Elevating, External Exhaust Models V, Elevating, Remote Exhaust Models V, Fixed-Height, Recirculating Models V, Fixed-Height, External Exhaust Models V, Fixed-Height, Remote Exhaust Models V, Elevating, Recirculating Models V, Elevating, External Exhaust Models V, Elevating, Remote Exhaust Models V, Fixed-Height, Recirculating Models V, Fixed-Height, External Exhaust Models V, Fixed-Height, Remote Exhaust Models Choosing the Exhaust System to Fit Your Lab R E r 32.5 (82.6 cm) 38 (96.5 cm) 38 (96.5 cm) 32.5 (82.6 cm) 32.5 (82.6 cm) 32.5 (82.6 cm) 32.5 (82.6 cm) 38 (96.5 cm) 38 (96.5 cm) 32.5 (82.6 cm) 32.5 (82.6 cm) 32.5 (82.6 cm) Recirculating For existing labs or labs without facility exhaust, it may be necessary to filter and recirculate the air. Specify a unit with integral blowers or filters. External Exhaust For distances that do not exceed 20 feet (6.1 m), you may choose a unit with integral blower and filters that may be connected to your facility s duct for venting. Remote Exhaust If your facility can supply an exhaust duct and remote blower system that provides an airflow of 550 to 600 cfm (0.260 to cu. m/s), a ducted unit will best suit your needs. Validated Exhaust Efficiencies R Recirculating E External r Remote N/A N/A 89 fpm (0.452 m/s) 38 fpm (0.193 m/s) N/A N/A Vented Area with Side Panels: 106 fpm (0.538 m/s) 80 fpm (0.406 m/s) Front of Unit with Side Panels: 55 fpm (0.279 m/s) 22 fpm (0.112 m/s) Without Filters With Filters Without Filters With Filters Average Air Velocity at 500 cfm (0.236 cu.m/s) Pressure loss through unit 0.41 in. w.g. (1.02 mb) 128 fpm (0.650 m/s) 69 fpm (0.351 m/s) Pathology Grossing Workstations Shandon Grosslab Senior

111 109 Shandon Grosslab Senior Workstation Specifications Pathology Grossing Workstations Shandon Grosslab Senior Proximity Controlled Unit s Shandon Grosslab Senior Pathology Workstation Elevating Recirculating V, 60 Hz, 1 Ph 9700 Elevating External exhaust V, 60 Hz, 1 Ph Elevating Remote exhaust V, 60 Hz, 1 Ph Shandon Grosslab Senior Pathology Workstation Elevating Recirculating V, 50/60 Hz, 1 Ph Elevating External exhaust V, 50/60 Hz, 1 Ph Elevating Remote exhaust V, 50/60 Hz, 1 Ph Shandon Grosslab Senior Pathology Workstation Fixed-Height Recirculating V, 60 Hz, 1 Ph Fixed-Height External exhaust V, 60 Hz, 1 Ph Fixed-Height Remote exhaust V, 60 Hz, 1 Ph Shandon Grosslab Senior Pathology Workstation Fixed-Height Recirculating V, 50/60 Hz, 1 Ph Fixed-Height External exhaust V, 50/60 Hz, 1 Ph Fixed-Height Remote exhaust V, 50/60 Hz, 1 Ph Manually Controlled Unit s Shandon Grosslab Senior Pathology Workstation Elevating Recirculating V, 60 Hz, 1 Ph Elevating External exhaust V, 60 Hz, 1 Ph Elevating Remote exhaust V, 60 Hz, 1 Ph Shandon Grosslab Senior Pathology Workstation Elevating Recirculating V, 50/60 Hz, 1 Ph Elevating External exhaust V, 50/60 Hz, 1 Ph Elevating Remote exhaust V, 50/60 Hz, 1 Ph Shandon Grosslab Senior Pathology Workstation Fixed-Height Recirculating V, 60 Hz, 1 Ph Fixed-Height External exhaust V, 60 Hz, 1 Ph Fixed-Height Remote exhaust V, 60 Hz, 1 Ph Shandon Grosslab Senior Pathology Workstation Fixed-Height Recirculating V, 50/60 Hz, 1 Ph Fixed-Height External exhaust V, 50/60 Hz, 1 Ph Fixed-Height Remote exhaust V, 50/60 Hz, 1 Ph Included with Product* Proximity Controlled Cold/Hot Water Faucet, Table Rinse, and Disposal (proximity controlled units only) Manually Controlled Cold/Hot Water Faucet, Table Rinse, and Disposal (manually controlled units only) Stationary Dictation Machine Rack (proximity controlled units only) Blower (not included with remote exhaust models) 1/2 hp Disposal Type 304 Stainless Steel Tabletop and Panels Upper and Lower Shelves Hand Spray Fluorescent Light Manually Controlled Tea Strainer Faucet Tea Strainer Vinyl Cutting Pad Side Splashes Formalin Dispenser Sharps Container Movable Requisition Rack Magnifier on Flexible Arm Magnetic Instrument Bar Towel Bar and Dispenser / C-fold Towels Uni-Capsettes Formaldehyde Neutralizer Pads Two Centimeter Rulers * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Foot Pedal Controlled Hot/Cold Water Faucet (manually controlled units only) 3/4 hp Disposal Camera Bracket Monitor Bracket Movable Splash Shield Dictation Interface and Microphone Assembly with Proximity/Foot Pedal Control - compatible with Lanier Voicewriter 160 or 260 Series recorders (proximity controlled units only) Lanier Voicewriter Standard Cassette Recorder, 160 Series (proximity controlled units only) Lanier Voicewriter Standard Cassette Recorder, 260 Series (proximity controlled units only) Optional digital camera and monitor brackets are available. Monopod arm for camera slides the width of the unit and telescopes. Monitor bracket is designed to securely hold a 14" display monitor and keyboard. Flexible Exhaust Duct Adapter for Elevating Units ships separately and installs to the back of elevating external and remote exhaust units. It connects to your facility s exhaust duct system, permitting the unit to elevate.

112 Shandon Grosslab Junior Pathology workstations. 110 Bench-top models are ergonomically designed to be low to the counter. Abundant fluorescent light is directed to the work surface. Rapid positive drainage. Vacuum breaker-protected water supply. Hands-free faucet control on selected benchtop models uses an infrared signal to activate cold water; also has manual override capability. Three air processing options: Recirculating, External Exhaust, or Remote Exhaust. Fume removal is efficient and quiet. Noise levels measure less than 65 decibels. Appliances plug into the unit for convenient use. Two hospital-grade duplex ground fault circuit interrupter (GFCI) receptacles on V units. Four IEC 320 receptacles on V units. Stainless steel construction. Stand-alone or benchtop models. Three efficient ventilation options. Facility-supplied residual current device (RCD) is required for V units. Back draft design for efficient capture of fumes across the work surface. Programmable microprocessor allows clock time to be changed or the filter replacement alarm to be reset. Flat stainless steel work surfaces include three removable perforated grid plates on bench-top models. Each unit comes complete with a magnetic tool bar, two integral centimeter rulers, tea strainer, and paper towel dispenser. Installation is quick and easy. Movable acrylic splash shield protects the user from sprays and splashes while dissecting specimens. Bench-top models can be configured as stand-alone units with the use of the optional stand (No ). Pathology Grossing Workstations Shandon Grosslab Junior

113 111 Shandon Grosslab Junior Workstation Specifications Pathology Unit s Shandon Grosslab Junior Pathology Workstation Benchtop Recirculating V, 60 Hz, 1 Ph 9600 Benchtop External exhaust V, 60 Hz, 1 Ph Benchtop Remote exhaust V, 60 Hz, 1 Ph Shandon Grosslab Junior Pathology Workstation Benchtop Recirculating V, 50/60 Hz, 1 Ph Benchtop External exhaust V, 50/60 Hz, 1 Ph Benchtop Remote exhaust V, 50/60 Hz, 1 Ph Shandon Grosslab Junior Pathology Workstation Stand-alone Recirculating V, 60 Hz, 1 Ph Stand-alone External exhaust V, 60 Hz, 1 Ph Stand-alone Remote exhaust V, 60 Hz, 1 Ph Shandon Grosslab Junior Pathology Workstation Stand-alone Recirculating V, 50/60 Hz, 1 Ph Stand-alone External exhaust V, 50/60 Hz, 1 Ph Stand-alone Remote exhaust V, 50/60 Hz, 1 Ph Grossing Workstations Shandon Grosslab Junior Included with Product* Blower (not included with remote exhaust models) Tea Strainer Faucet (same as water faucet) Type 304 Stainless Steel Tabletop and Panels Upper and Lower Shelves Fluorescent Light Tea Strainer Movable Dictation Machine Rack Sharps Container Tower Bar and Dispenser / Magnetic Instrument Bar Movable Splash Shield Uni-Capsettes C-fold Towels Centimeter Rulers (2 supplied) Proximity-Controlled Cold Water Faucet (benchtop models only) Stainless Steel Hand Spray (benchtop models only) Adjustable Leveling Feet (benchtop models only) Perforated Grid Plates (benchtop models only) Stainless Steel Base with Tubular Frame and Cabinet (stand-alone models only) 1/2 hp Disposal (stand-alone models only) Manually-Controlled Cold / Hot Water Faucet and Disposal (stand-alone models only) Hand Spray Combined with Faucet (stand-alone models only) * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Magnifier Lamp ( V) Magnifier Lamp ( V) Adjustable Height Stand with Shelf ( cm) (bench-top models only) Foot Pedal-Controlled Faucet (stand-alone models only) Replacement Filters Replacement Filters Includes 2 potassium permanganate filters and 2 fine particle filters R Recirculating Use of Filters is required. E External Exhaust Use Filters if required for application. r Remote Exhaust No Filters are required. The Grosslab Junior Stand-alone models feature a hand spray combined with the faucet. To minimize contamination and maximize convenience, the Grosslab Junior Bench-top models feature a hands-free control for cold water. An optional magnifier lamp mounts on the side of the unit for added convenience in dissecting delicate specimens. Filter drawers are located in the front of the unit for easy access.

114 112 Benchtop Model Specifications Stand-alone Model Specifications Physical Specifications Dimensions (H x W x D) Overall: Recirculating: x 48 x 28 (116.2 x x 71.1 cm) External: x 48 x 28 (134 x x 71.1 cm) Remote: x 48 x 28 (134 x x 71.1 cm) Work Surface Height: 1.75 (4.4 cm) above benchtop Recommended Depth: 29 (73.7 cm) from front of unit to wall Right-Hand Sink: 18 x 6 x 4 (45.7 x 15.2 x 10.2 cm) Weight Uncrated: 300 lbs. (136.1 kg) Crated: 350 lbs. (158.8 kg) Electrical Specifications One IEC 320 Power Entry Module and one point-of-use power cord V and V models require facility receptacles with 15 amp circuits for each power cord V models draw 15 amps including the two hospital-grade duplex ground fault circuit interrupter (GFCI) receptacles V models draw 15 amps including the four IEC 320 receptacles with facility-supplied residual current device (RCD) protection required. Plumbing Specifications One 1/2 industrial-grade flexible hose with 3/4 female hose fittings is supplied for connection to cold water supply lines. One 3/4 NPT connection and 1 I.D. reinforced flexible hose is supplied for connection to facility drain line. Agency Approvals UL / cul ( V only); CE ( V only) An optional stand (No ) allows you to use the Grosslab Junior Bench-top model as a stand-alone unit. The stand is height-adjustable from 28" to 42" (71.1 cm to cm). It has a sturdy, extruded aluminum frame and stainless steel shelf with back panel. Physical Specifications Dimensions (H x W x D) Overall: Recirculating: 78.5 x 48 x 28 (199.4 x x 71.1 cm) External: 85.5 x 48 x 28 (217.2 x x 71.1 cm) Remote: 85.5 x 48 x 28 (217.2 x x 71.1 cm) Work Surface Height: 36 (91.4 cm) Recommended Depth: 29 (73.7 cm) from front of unit to wall Right-Hand Sink: 14 x 12 x 9.75 (35.6 x 30.5 x 24.8 cm) Weight Uncrated: 500 lbs. (226.8 kg) Crated: 600 lbs. (272.2 kg) Electrical Specifications Two IEC 320 Power Entry Modules and two point-of-use power cords V and V models require facility receptacles with 15 amp circuits for each power cord V models draw 15 amps including the two hospital-grade duplex ground fault circuit interrupter (GFCI) receptacles V models draw 15 amps including the four IEC 320 receptacles with facility-supplied residual current device (RCD) protection required. Plumbing Specifications Two 1/2 industrial-grade flexible hoses with 3/4 female hose fittings are supplied for connection to cold and hot water supply lines. 1 1/2 I.D. reinforced flexible hose is supplied for connection to facility drain line. Choosing the Exhaust System to Fit Your Lab R E r Recirculating For existing labs or labs without facility exhaust, it may be necessary to filter and recirculate the air. Specify a unit with integral blowers or filters. External Exhaust For distances that do not exceed 20 feet (6.1 m), you may choose a unit with integral blower and filters that may be connected to your facility s duct for venting. Remote Exhaust If your facility can supply an exhaust duct and remote blower system that provides an airflow of 550 to 600 cfm (0.260 to cu. m/s), a ducted unit will best suit your needs. Validated Exhaust Efficiencies R Recirculating Vented Area: fpm ( m/s) Front of Unit: 10 fpm (0.051 m/s) E External Vented Area: fpm ( m/s) Front of Unit: fpm ( m/s) r Remote Average air velocity at 400 cfm (0.189 cu. m/s) exhaust airflow: Vented Area: 148 fpm (0.752 m/s) Front of Unit: 15 fpm (0.076 m/s) Pressure Loss Through Unit: 1.15 w.g. (2.87 mb) Pathology Grossing Workstations Shandon Grosslab Junior

115 113 Shandon Custom Grossing Workstations We customize for your needs. Pathology Grossing Workstations Thermo Electron Corporation offers a full range of stand-alone and bench-top organized pathology workstations for gross examination and sectioning of specimens. Along with the standard models, customized units and installations are available upon request to meet your specifications. Today just as they have for the past 60 years professionals in the fields of medical and mortuary science continue to come to us. Our staff is committed to excellence in product, service, and customer satisfaction. This means that you can have a great deal of assurance in the products you specify and install. No one brings you more experience and expertise. That s why we re the full-service, "Total System" company that more and more medical professionals, architects, and contractors look to with confidence. Here is a showcase of the more popular Custom Grossing Workstations: Custom Products Island-style Downdraft Workstation. Back Draft Workbench with Height Adjustment. Back Draft Workstation with Viewing Door and Surgical Light. Back Draft Workstation with Illuminated Magnifier Lamp. Shandon Grosslab TM Senior with Formalin Collection Cup Sink.

116 Shandon Fume Control Workstations 114 Shandon Hyperclean 1 Shandon Hyperclean 1 Specifications Shandon Hyperclean V with Blower Unit V Perforated stainless steel insert fits snugly into removable spill tray. Adjustable for bench depths of up to 21.5" (54.6 cm). Optional safety panel door with hand holes increases air capture velocity to approximately 100 fpm (0.508 m/s). Sides and front are made from clear acrylic, which is impervious to most chemicals. Filters are replaced easily without tools. Comes complete with blower and one charcoal filter. Shandon Hyperclean 2 Customized for enclosing large benchtop equipment. Full-height front doors provide easy access to equipment. Sides may be removed and replaced for easy access to the equipment inside the Hyperclean. Sides and front are made from clear acrylic, which is impervious to most chemicals. Filters are replaced easily without tools. Comes complete with blower and one charcoal filter. Physical Specifications Dimensions (H x W x D) 14.5 x 30 x (adjustable) (36.8 x 76.2 x cm) Weight 100 lbs. (45.4 kg) Power Requirements V, 1.1 amp, 60 Hz, 1 Ph V, 0.8 amp, 50/60 Hz, 1 Ph Included with Product* Blower V V Charcoal Filter * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Optional Accessories Vent Adapter Kit Fine Particle Filter Formaldehyde Vapor Filter Safety Door Panel with Hand Holes Agency Approvals UL / cul ( V only); CE ( V only) Shandon Hyperclean 2 Specifications Shandon Hyperclean V with Blower Unit V Physical Specifications Dimensions (H x W x D) 44.1 (34.5 without blower) x 35 x 32 (112 x 88.9 x 81.3 cm) Weight 165 lbs. (74.8 kg) Power Requirements V, 1.1 amp, 60 Hz, 1 Ph V, 0.8 amp, 50/60 Hz, 1 Ph Included with Product* Blower V V Charcoal Filter * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Optional Accessories Vent Adapter Kit Agency Approvals UL / cul ( V only); CE ( V only) Pathology Fume Control Shandon Hyperclean Series

117 115 Shandon Hyperclean TM 20 Shandon Hyperclean 20 Specifications Shandon Hyperclean V V Pathology Swing-down front panel hinges from top and covers half of the face opening. Sides and front are made from clear acrylic, which is impervious to most chemicals. Comes complete with two blowers and two charcoal filters. Filters are replaced easily without tools. Physical Specifications Dimensions (H x W x D) x 30 x 22 (90.8 x 76.2 x 55.9 cm) Weight 198 lbs. (89.8 kg) Power Requirements (Each Blower) V, 1.1 amp, 60 Hz, 1 Ph V, 0.8 amp, 50/60 Hz, 1 Ph Included with Product* Blowers (same voltage for both) - 2 supplied V V Charcoal Filters - 2 supplied * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Optional Accessories Vent Adapter Kit (requires 2 kits) Fine Particle Filter Formaldehyde Vapor Filter Agency Approvals UL / cul ( V only); CE ( V only) Fume Control Shandon Hyperclean TM 22 Shandon Hyperclean 22 Specifications Shandon Hyperclean V V Shandon Hyperclean Series Use as a one or two person workstation. Two swing-down front panels hinge from top and cover half of the face opening. Sides and front are made from clear acrylic, which is impervious to most chemicals. Comes complete with four blowers and four charcoal filters. Filters are replaced easily without tools. Physical Specifications Dimensions (H x W x D) x 60 x 22 (90.8 x x 55.9 cm) Weight 378 lbs. (171.5 kg) Power Requirements (Each Blower) V, 1.1 amp, 60 Hz, 1 Ph V, 0.8 amp, 50/60 Hz, 1 Ph Included with Product* Blowers - 4 supplied V (same voltage for all) V Charcoal Filters - 4 supplied * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Optional Accessories Vent Adapter Kit (requires 4 kits) Fine Particle Filter Formaldehyde Vapor Filter Agency Approvals UL / cul ( V only); CE ( V only)

118 Shandon Hyperclean 36 Shandon Hyperclean 36 Specifications Shandon Hyperclean V V Unit can be configured with the blower located either on the top or the on the back. Sides are made from clear acrylic, which is impervious to most chemicals. Filters are replaced easily without tools. Comes complete with one blower and one charcoal filter. Shandon Hyperclean 60 Accommodates Shandon linear stainers or may function as a double workstation. Blowers mount on either the top or on the back of the unit. Filters are replaced easily without tools. Sides are made from clear acrylic, which is impervious to most chemicals. Comes complete with two blowers and two charcoal filters. Physical Specifications Dimensions (H x W x D) Top-Mounted Blower: 25 x 36 x 13 (63.5 x 91.4 x 33 cm) Back-Mounted Blower: 13 x 36 x 25 (33 x 91.4 x 63.5 cm) Weight 110 lbs. (49.9 kg) Power Requirements (Each Blower) V, 1.1 amp, 60 Hz, 1 Ph V, 0.8 amp, 50/60 Hz, 1 Ph Included with Product* Blower V V Charcoal Filter * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Optional Accessories Vent Adapter Kit Fine Particle Filter Formaldehyde Vapor Filter Agency Approvals UL / cul ( V only); CE ( V only) Shandon Hyperclean 60 Specifications Shandon Hyperclean V V Physical Specifications Dimensions (H x W x D) Top-Mounted Blower: 25 x 60 x 13 (63.5 x x 33 cm) Back-Mounted Blower: 13 x 60 x 25 (33 x x 63.5 cm) Weight 220 lbs. (99.8 kg) Power Requirements (Each Blower) V, 1.1 amp, 60 Hz, 1 Ph V, 0.8 amp, 50/60 Hz, 1 Ph Included with Product* Blowers - 2 supplied V (same voltage supplied on each order) V Charcoal Filters - 2 supplied * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Optional Accessories Vent Adapter Kit (requires 2 kits) Fine Particle Filter Formaldehyde Vapor Filter Pathology Fume Control Shandon Hyperclean Series Agency Approvals UL / cul ( V only); CE ( V only)

119 117 Pathology Shandon Hyperclean Vent Adapter Kit Connects any Hyperclean blower to a facility s exhaust system for outside venting. Vent Adapter Kit contains 10 0 (304.8 cm) of flexible duct which mounts to the back of a Hyperclean blower unit. Vent Adapter Kit duct has 3" (7.6 cm) diameter. Duct may be cut to fit a window panel or exhaust duct system. Shandon Hyperclean Vent Adapter Kit Shandon Benchtop Fume Expeller Shandon Benchtop Fume Expeller Specifications Fume Control Shandon Hyperclean Series Low-profile, efficient unit with up to 12 dual-speed fans. Units are portable and can be moved where needed. Each fan is rated at 72 cfm (0.034 cu. m/s) in free air. Dual / V switch on back of unit. Stainless steel construction. Available configurations include models with 4, 6, 8, or 12 fans. 28 (71.1 cm) recirculating model includes one charcoal filter; 44 (111.8 cm) recirculating unit includes two charcoal filters; 60 (152.4 cm) recirculating unit includes three charcoal filters. Filter replacement is from top of unit. Can be attached to facility s ductwork for outside venting. See Shandon Dissecting Instruments and Accessories on pages Shandon Benchtop Fume Expeller, 28 recirculating Shandon Benchtop Fume Expeller, 44 recirculating Shandon Benchtop Fume Expeller, 60 recirculating Shandon Benchtop Fume Expeller, 28 ducted Shandon Benchtop Fume Expeller, 44 ducted Shandon Benchtop Fume Expeller, 60 ducted Physical Specifications Dimensions (H x W x D) 6 x 28 or 44 or 60 x 6.5 (15.2 x 71.1 or or x 16.5 cm) Weight 28 Unit: 41 lbs. (18.6 kg) 44 Unit: 65 lbs. (29.5 kg) 60 Unit: 100 lbs. (45.4 kg) Power Requirements (Each Blower) Dual Voltage V or V, 50/60 Hz, 1 Ph Included with Product* Charcoal Filters (recirculating units only) * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Optional Accessories Charcoal Filters (recirculating units only) Formaldehyde Vapor Filter

120 Shandon Filter Guide 118 Formaldehyde Neutralizing (Potassium Permanganate) Filters Formaldehyde Neutralizing (Potassium Permanganate) Filters/Fine Particle Filter Packs Charcoal Filters Prefilter Cartridges Fine Particle Filters Charcoal Filter Effectiveness Guide High Capacity Satisfactory Not highly absorbed Low Capacity Acetaldehyde Acetic acid Acetic anhydride Acetone Acetylene Acrolein Acrylic acid Acrylonitrile Amines Ammonia Amyl acetate Amyl alcohol Amyl ether Anesthetics Aniline Antiseptics Benzene Bleaching solutions Borane Bromine Butadiene Butane Butanone Butyl acetate Butyl alcohol Butyl cellosolve Butyl ether Butyne Butyraldehyde Butyric acid Camphor Cancer odor Caprylic acid Carbolic acid Carbon disulfide Carbon dioxide Carbon monoxide Carbon tetrachloride Cellosolve FILTER TYPE COMPATIBLE EQUIPMENT SIZE QTY. ORDER NO. Hyperclean 1, Hyperclean 20, Hyperclean 22, Hyperclean 36, Hyperclean 60 Grosslab V Series 8600; Benchtop Fume Expeller Hyperclean 1, Hyperclean 20, Hyperclean 22, Hyperclean 36, Hyperclean 60 Hyperclean 1, Hyperclean 20, Hyperclean 22, Hyperclean 36, Hyperclean 60 Cellosolve acetate Charred material Chlorine Chlorobenzene Chlorobutadiene Chloroform Chloronitropropane Chloropicrin Cigarette smoke odor Cleaning compounds Combustive odors Corrosive gasses Creosote Crotonaldehyde Cyclohexane Cyclohexanol Cyclohexanone Cyclohexene Decane Dibromoethane Dichlorobenzene Dichlorodifluoromethane Dichloroethane Dichloromonofluoromethane Dichloronitroethane Dichloropropane Dichlorotetrafluoroethane Diethylamine Diethyl ketone Dimethylaniline Dimethylsulfate Dioxane Dipropyl ketone Disinfectants Embalming odors Ethane Ethyl acetate Ethyl acrylate Ethyl alcohol Ethyl amine Ethyl benzene Ethyl bromide Ethyl chloride Ethyl formate Formaldehyde Glutaraldehyde Hydrogen bromide Hydrogen chloride Hydrogen cyanide Hydrogen fluoride Hydrogen iodide Hydrogen selenide Hydrogen sulfide Indole Inorganic chemicals Iodine Iodoform Isophorone Isoprene Isopropyl acetate Isopropyl alcohol Isopropyl ether Kerosene Lactic acid Menthol Mercaptans Mesityl oxide Methane Methyl acetate Methyl acrylate Methyl alcohol Methyl bromide Methyl butyl ketone Methyl cellosolve Methyl cellosolve acetate Methyl chloride Methyl chloroform Methyl ether Methyl ether ketone Methyl formate Methyl isobutyl ketone Methyl mercaptan Methylcyclohexane Methylcyclohexanol Methocyclohexanone Methylene chloride Mildew Monochlorobenzene Monofluorotrichloromethane Naphtha Naphthane nicotine Nitric acid Nitro benzenes Nitroethane Nitrogen dioxide Nitroglycerine Nitromethane Nitropropane Nitrotoluene Nonane Octalene Octane Organic chemicals Osmium tetroxide Ozone Palmitic acid Paradichlorobenzene Pentane Pentanone Pentylene Pentyne Perchloroethylene Phenol Phosgene Plastics Propane Propionaldehyde Hyperclean " x 11" x 11" (6.7 x 27.9 x 27.9 cm) Each Benchtop Fume Expeller 15.31" x 6.06" x 1.22" (38.9 x 15.4 x 3.1 cm) Each Early Lipshaw Fume Hoods (S, SX and TP X-Pellers) Early Lipshaw Fume Hoods (S, SX and TP X-Pellers) 11.25" x 5.75" x 1.31" (29 x 15 x 3.3 cm) 15.31" x 6.06" x 1.22" (38.9 x 15.4 x 3.1 cm) Grosslab Senior Series 8700 and " x 11.25" x 2" (42.7 x 28.6 x 5.1 cm) 1 Set Grosslab Junior Series " x 7.75" x 2.25" (48.3 x 19.7 x 5.7 cm) 1 Set " x 5.75" x 1.31" (29 x 15 x 3.3 cm) 12" x 12" x 1.5" (30.5 x 30.5 x 3.8 cm) 12" x 12" x 0.5" (30.5 x 30.5 x 1.3 cm) 11.25" x 5.75" x 1.31" (29 x 15 x 3.3 cm) Each Each Each 6 / Pk. Each Each Each Propionic acid Propyl acetate Propyl alcohol Propyl chloride Propyl ether Propyl mercaptan Propylene Propyne Putrescine Pyridine Resins Skatole Solvents Stoddard solvent Styrene monomer Sulfur dioxide Sulfur trioxide Tetrachloroethane Tetrachloroethylene Tobacco/smoke odor Toluene Toluidine Trichloroethylene Trichloroethane Turpentine Urea Valeric acid Valericaldehyde Vinyl chloride Volatile materials Xylene Pathology Fume Control Filters

121 119 Shandon Morgue / Autopsy Room Planning Autopsy / Mortuary Morgue / Autopsy Room Planning Planning Process The Planning Process General Considerations Regardless of size, the following items need to be taken into consideration: 1. Sanitation, including provision for appropriate infection control and disinfection, specimen and tissue disposal and instrument sterilization. 2. Ventilation. 3. Gross specimen and body photography. 4. X-ray facilities, if medical / legal work is performed. 5. Collections of microbiological and toxicological specimens, including safeguards for specimens requiring chain of custody. 6. Refrigeration for specimens and supplies. 7. Dictation equipment. Much thought should be given to the ventilation system. Consider a downdraft table, when appropriate, instead of ventilation hoods. Surfaces should be durable enough to withstand cutting, exposure to strong cleaning agents such as bleach, and exposure to chemicals such as formaldehyde. Surfaces should also be easy to clean. Location Access for gurneys to the morgue must be provided. The location is further dictated by the location of the loading ramp, to provide access for funeral directors to pick up bodies. The room should be accessible to physicians and students to attend autopsies. Work Flow The following suggestions are to serve as a guide. Data to be considered when determining the size and design of the Autopsy/Morgue suite include the following: 1. The number of autopsies to be performed yearly.

122 The number of autopsies to be performed simultaneously. 3. The number of general hospital autopsies performed versus medical/legal autopsies. 4. Attendance of medical staff, students, law enforcement and other interested parties at autopsies. 5. The number of bodies to be held at a given time in the morgue refrigerators. Cadaver Handling Appropriate gurneys must be provided to transport cadavers to the morgue. Once in the morgue, movable lifts are required to raise and lower cadavers onto tables, storage racks and refrigerators. Consider the ergonomics of the equipment and room layout. Will it be safe (and convenient) to lift, lower and move an 82" x 23" (208 x 58 cm) body tray with an average 200 lb. (90.7 kg) load? Functional Areas The most efficient morgue designs consider work-flow patterns that allow for handling, post-mortem evaluation, and storage of bodies. Consider providing rooms for specific activities such as the following: 1. Shower and Dressing Area. 2. Preparations - Wash Room. 3. Autopsy Area. 4. Isolation Area. 5. Dissection Area. 6. Storage Area. 7. Viewing Area. Autopsy Area Accommodations must be made for evisceration to be done in this area. It will be a high activity area that will require a great deal of cleaning. This area should include tables and sinks and a dictation system. There are many models of autopsy and necropsy tables available. Some are stationary, while others are mobile. The tables should be at a comfortable working height. Adjustable tables such as the Shandon LM-4 or LM-10 models allow the work surface to be raised or lowered to suit the user. Check with local codes for built-in garbage disposal use, vacuum breaker requirements and liquid waste disposal or collection. Isolation Area An area isolated from the rest of the morgue is needed for working on high-risk cases. It should be designed to decrease the potential spread of pathogens. The area should have its own autopsy table and sink. It is preferable for the infectious area to have a ventilation system that is separate from the rest of the morgue facility. Dissection Area This area should be designed to perform detailed organ dissection after evisceration. There should be adequate overhead lighting and dictation system. It may be part of the autopsy table, such as the Shandon LM-9 L-Shaped Table or at a specific dissection center such as the Shandon Grosslab Senior. If a cryostat is used for rapid diagnosis, the equipment and the histologic slide staining should be placed in the preparation room, not in the autopsy room. Storage The design and layout should include some means of keeping the cadaver cold to inhibit decay. A variety of refrigeration options is available including models with telescoping racks, roller systems and walk-in models. Racking systems should also be considered in planning this section of the project. Consider installing double end-opening storage systems so that funeral home personnel can receive the body without entering the autopsy room. Viewing Area Consider including an area that is separate from the rest of the morgue facility where the family of the deceased can view the body. Some options include the following: 1. A room with a viewing window or a curtained section. 2. Refrigerator with a telescopic racking system (preferably open at both ends). 3. Walk-in refrigerators with a window. 4. Video-tape viewing. Autopsy / Mortuary Morgue / Autopsy Room Planning Planning Process

123 121 Shandon Capabilities Morgue / Autopsy Room Planning Shandon Capabilities Autopsy / Mortuary Total System Approach Early in the planning stages, we apply our Total System approach. We look at your overall needs, thinking of body-handling in terms of space utilization and work flow. We can offer you as much or as little help as you need. A world-wide sales staff to assist in project development. In-house engineering with computer-aided drafting (CAD) capabilities. Expert manufacturing. Installation services. Technical support and service. No other manufacturer of medical/mortuary equipment offers this kind of personalized concept-to-completion support. It all adds up to greater savings and efficiency in space, construction costs and productivity for you. Quality Certified ISO 9001 Registered Company Thermo Electron Corporation strives to provide the finest products available. It is a tradition of pride that is reflected throughout Anatomical Pathology in achieving ISO 9001 Registration. The ISO registration signifies that at all levels of the company consistent quality systems are in place. It also means that we have carefully scrutinized our suppliers to be certain that only quality materials and goods become Shandon products. We are audited semi-annually by an independent agency to maintain the ISO 9001 certification. Pathology Laboratory Equipment, Morgue Equipment Thermo Electron Corporation can equip your facility with dissecting, autopsy or necropsy tables, sinks, refrigerators, grossing stations and cabinetry. From simple work surfaces to complicated tables with integral downdraft systems, sinks and hydro-aspirators, we have a wide range of standard products to fit your needs. Obese Body Products Thermo Electron Corporation can provide a comprehensive range of obese body products for morgues, bariatric facilities, and medical schools. Customized units and installations are available upon request to meet your specific equipment requirements, to satisfy your needs for total system compatibility, and to eliminate or minimize manual lifting. Please contact your Thermo Electron Corporation, Anatomical Pathology representative for details. Animal Research Equipment Veterinary researchers know they can depend on a quality-built product. We manufacture equipment for veterinary and animal research, including the large animal necropsy table, grossing stations and downdraft necropsy tables. Free Floor Layouts And Drawings Our engineers and computer-aided drafting operators can provide you with quick, complete drawings of your project on disk.

124 122 Custom Built to Your Specifications Safety Built In A Word About Ventilation Within the autopsy room, odors and fumes may be present. To increase the safety of the area, particular attention should be paid to the installation of an efficient ventilation system. We offer a series of tables with a simple yet effective design that pulls fumes down and away from workers. Shandon downdraft tables provide a passageway for fumes to be exhausted by drawing air from the work surface to a roof vent. Typically, a duct extends from the base of the table through the floor. Waste water and air separate in the table pedestal. Air drawn by the facility-supplied fan vents to the roof of the building. The underside of the pedestal is open to allow for the optimal placement of utility tie-ins. The Anatomical Pathology business unit has an in-house airflow specialist who can assist your architects and engineers in designing a system that will provide excellent efficiency. Other ventilation systems are available. Please call for specifics. Shandon Downdraft Ventilation Assembly Concrete Floor Vapors Water Exhaust Duct Work Surface Table Base Plumbing No Job Too Big Or Too Small Whether it s fabricating a small bracket attachment or designing and installing an entire facility, our staff welcomes the challenge. Our plant is equipped with state-of-the-art fabricating machine tools to build products of the finest quality, regardless of size. Custom Products Crafted To Your Specification The Anatomical Pathology team of sales personnel, engineers and manufacturing staff excel in producing custom products to meet your unique space, ventilation and budgetary requirements. Of course, there is NO CHARGE for consultation. Fan With Motor Roof Vacuum Breakers Protect Water Supply Water supply lines on Shandon tables are equipped with a special in-line vacuum breaker to act as an anti-siphoning device. The vacuum breaker protects your facility s potable water supply by making it impossible for water to accidentally re-enter the supply line. Autopsy / Mortuary Morgue / Autopsy Room Planning Shandon Capabilities

125 123 Shandon AN-68 Series Autopsy Sinks Autopsy / Mortuary Autopsy Sinks Shandon AN-68 Series Shandon AN-68-C Space-saving, flexible workstation and utility dissecting sink interlocks with the AN-49 Series Transportable Autopsy Tables (sold separately). The AN-68-C features a center sink with work surfaces on both sides. The table/sink combination allows the user to transport and perform post-mortem examinations with minimal lifting and contact with the body. Shandon AN-68-C, with disposal V, 60 Hz Shandon AN-68-C, with disposal V, 50/60 Hz Shandon AN-68-C, without disposal V, 60 Hz Shandon AN-68-C, without disposal V, 50/60 Hz Shandon AN-68-L Space-saving flexible workstation and utility dissecting sink. The AN-68-L interlocks with AN-49 Transportable Autopsy Tables (sold separately). Left-hand approach with sink and latching brackets are at left; work area and drawer are on the right. Shandon AN-68-L, with disposal V, 60 Hz Shandon AN-68-L, with disposal V, 50/60 Hz Shandon AN-68-L, without disposal V, 60 Hz Shandon AN-68-L, without disposal V, 50/60 Hz Shandon AN-68-C Specifications Physical Specifications Dimensions (H x W x D) Unit: 74 x 114 x 28 (188 x x 71.1 cm) Sink: 6 x 33.5 x 21 (15.2 x 85.1 x 53.3 cm) Weight 900 lbs. (408.2 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for duplex receptacles. One circuit for lights and units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and only (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s) for each of two exhaust grills. Approx. pressure drop: inches w.g ( mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units) Shandon AN-68-L Specifications Physical Specifications Dimensions (H x W x D) Unit: 74 x 84 x 28 (188 x x 71.1 cm) Sink: 6 x 33.5 x 21 (15.2 x 85.1 x 53.3 cm) Weight 700 lbs. (317.5 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for duplex receptacles. One circuit for lights and units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and only (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s). Approx. pressure drop: inches w.g ( mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units)

126 Shandon AN-68-R Space-saving flexible workstation and utility dissecting sink. The Shandon AN-68-R interlocks with Shandon AN-49 Transportable Autopsy Tables (sold separately). Right-hand approach with sink and latching brackets are at right; work area and drawer are on the left. Shandon AN-68-R, with disposal V, 60 Hz Shandon AN-68-R, with disposal V, 50/60 Hz Shandon AN-68-R, without disposal V, 60 Hz Shandon AN-68-R, without disposal V, 50/60 Hz Shandon AN-68 Series Features Multiple-Use Capability Coupled with one of the AN-49 series transportable autopsy tables, it creates an efficient workstation as well as a sink. Ventilation Unit connects to facility ventilation system. Fluorescent Lights The unit features fluorescent, UL-rated lighting for damp locations. Plumbing All visible plumbing parts are brass with a heavy chrome-plating finish. All water supply lines are protected by anti-siphon vacuum breakers which prevent the potable water supply from being contaminated by pollutants if water pressure drops. Faucet Completely plumbed, hot/cold faucets are supplied with a swivel spout, built-in vacuum breaker and wrist-blade handles. Hydro-aspirator Deluxe hydro-aspirator with reverse-flow feature is supplied complete with control valve, vacuum breaker, air gap and plastic tubing. Table Rinse With Tubing Table rinse assembly with 12' (3.7 m) of clear flexible tubing delivers a high rate of water flow to rinse the sink. Shandon AN-68-R Specifications Eyewash Station A spray head with lever-operated controls is mounted on the backsplash of the unit. In the event of an emergency, it delivers an immediate water flow to thoroughly flush eyes. Hand-Held Spray The hand-held sprayer is useful for general rinsing and cleaning. It is equipped with an 8' (2.4 m) flexible hose and an on/off control on the handle. Fabrication Units are made from type 304 stainless steel with a #4 finish. All welds are made with stainless steel filler and ground smooth and regrained to match the #4 finish. Factory Tested All plumbing and electrical work is accomplished at the factory and is tested prior to shipment. Acoustic Coating The coating is applied to the underside of unit for sound deadening and to prevent condensation. Grid Plates Removable, perforated stainless steel grid plates provide a flat working surface. The area beneath the plates is sloped to promote drainage. Physical Specifications Dimensions (H x W x D) Unit: 74 x 84 x 28 (188 x x 71.1 cm) Sink: 6 x 33.5 x 21 (15.2 x 85.1 x 53.3 cm) Weight 700 lbs. (317.5 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for duplex receptacles. One circuit for lights and units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and only (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s). Approx. pressure drop: inches w.g ( mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units) Duplex Receptacle Hospital-grade duplex GFCI (ground fault current interrupter) receptacles are provided on all V units. This feature interrupts the electrical supply when a ground fault occurs to protect the user against electrical shock. Hospital-grade duplex receptacles are provided on V AN-68 Series units. While these receptacles do not protect against shock, they are ready for the customer to connect them to an RCD (residual current device) which does protect against shock. Disposal Heavy-duty 1/2 HP commercial disposal is a standard feature on models 68105, 68115, 68125, 68135, 68145, and Optional Scale No. 820 Scale Support Bracket for No Postmortem Scale or No Digital Post-mortem Scale. Optional Air or Gas Connections The unit may be fitted with a gas cock (No. 7310) and/or an air cock (No. 7310). Specify at the time of order. Units may be customized to meet your specifications (contact your local Thermo Electron Corporation, Anatomical Pathology Sales Representative for details). 124 Autopsy / Mortuary Autopsy Sinks Shandon AN-68 Series

127 125 Shandon AN-49 Transportable Autopsy Tables Autopsy / Mortuary Couples with AN-68 Series Autopsy Sink for a highly efficient and flexible workstation. All AN-49 frames are built to slope the tabletop for drainage when locked in place with the sink. Slope can be increased with the use of riser blocks on the table frame. Tabletop is 80" x 31" x 1.5" (203.2 x 78.7 x 3.8 cm) L x W x D. Tabletop is slightly creased to promote drainage. Features a removable tabletop and special table-to-sink latching mechanism to secure table to the AN-68 sink. Available in four configurations: the basic unit, with a crank for elevation, with a roller tray or with an x-rayable tray. Cart frame is made from 16-gauge stainless steel tubing. Type 304 stainless steel tabletop (14-gauge with a #4 grain finish). Weight is approximately 255 lbs. (115.7 kg). Units may be customized to meet your specifications (contact your local Thermo Electron Corporation, Anatomical Pathology Sales Representative for details). Transportable Autopsy Tables Shandon AN-49 Shandon AN-49-EL Shandon AN-49 Series Basic, transportable autopsy table. Dimensions (L x W x H): 80" x 31.8" x 34.8" (203.2 x 80.6 x 88.3 cm). Slope can be increased with the use of riser blocks on the table frame. Order number includes AN-49-C Mobile Cart (No ) and AN-49 stainless steel tabletop (No ). Shandon AN-49 Transportable Autopsy Table with stainless steel top Shandon AN-49-C Mobile Cart Shandon AN-49 Stainless Steel Tabletop Tabletop raises at head end. Hand crank raises and lowers the head end over an 8" (20.3 cm) range to promote drainage. When the AN-49-EL is set at its lowest position, the tabletop has no slope. Maximum height of table end is 42" (106.7 cm). Dimensions (L x W x H): 80" x 31.8" x 33.8" to 42" (203.2 x 80.6 x 85.7 to cm). Order number includes mobile cart and AN-49 stainless steel tabletop (No ). Shandon AN-49-EL Elevating Transportable Autopsy Table Shandon AN-49 Stainless Steel Tabletop

128 Shandon AN-49-RT Shandon AN-49 with X-Tray 126 Specially designed body tray rolls on bearings and can be moved on and off with minimal effort. Locking mechanism holds the tray securely in place on top of the roller system. Minimizes the need to lift the cadaver; once the cadaver is received, it is placed on the roller tray, where it remains on the same tray during the autopsy, dissecting or embalming, and during transportation and storage. The AN-49-RT includes mobile cart and No body tray (with drain hole). Dimensions (L x W x H): 76.5" x 31.8" x 34.69" (194.3 x 80.6 x 88.1 cm). Shandon AN-49-RT Transportable Autopsy Table with Roller Tray Roller Body Tray with drain hole Corrosion-Resistant Casters 8" (20.3 cm) casters have swivel lock and wheel brake for added stability. Features the X-Tray, a removable table top for the AN-49 Series of Transportable Autopsy Tables. An x-ray film carrier fits into a slot on underside of the tray and allows for x-rays to be taken before procedures are performed. Especially useful in determining the location of foreign objects before the examination. The Shandon AN-49 with X-Tray includes AN-49-C mobile cart (No ) and X-Tray X-rayable Body Tray (gray or blue). Dimensions: 80" x 31.8" x 34.8" (203.2 x 80.6 x 88.3 cm). Shandon AN-49 Transportable Gray Autopsy Table with X-Tray Blue Shandon X-Tray X-rayable Body Tray Gray Shandon X-Tray X-rayable Body Tray Blue Shandon AN-49-C Mobile Cart Shandon AN-49 Cart-To-Sink Latching Mechanism All Shandon AN-49 series tables come complete with an exclusive Autolatch latching mechanism. The latch secures the table to an AN-68 Series Autopsy Sink. Once in place, the table will not shift, providing a stable work space. The latching mechanism can be retrofitted to older Shandon AN-49 series tables for the same convenient operation. Autopsy / Mortuary Transportable Autopsy Tables Shandon AN-49 Series

129 127 Shandon AN-96/95 Embalming Station Autopsy / Mortuary Patented table and sink combination serves as a ventilated embalming station. Roller tray system simplifies cadaver handling. Features excellent fume-capturing capability. Note: Units are shown with Shandon No body tray which is sold separately. See page 142 for details. Embalming Stations Shandon AN-96 / 95 Shandon AN-96/95 Specifications Shandon AN-96/AN-95, V, 60 Hz and with disposal V, 50/60 Hz and Shandon AN-96 Sink, V, 60 Hz with disposal; does not include table V, 50/60 Hz Shandon AN-95 Table, V, 60 Hz does not include sink V, 50/60 Hz Roller Body Tray with drain hole See Shandon Body Trays on page 142. Physical Specifications Dimensions (H x W x D) Table: 38 x 77.5 x 32 (96.5 x x 81.3 cm) Sink: 77 x 92 x 40 (195.6 x x cm) Weight Sink: 915 lbs. (415 kg) Table: 540 lbs. (244.9 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for duplex receptacles. One circuit for lights and units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on all models (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended 1,000-1,200 cfm ( cu. m/s). Approx. pressure drop: inches w.g. ( mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units)

130 128 Shandon AN-96/95 Series Features Ventilation One inch (2.54 cm) high table-length exhaust ducts on each side of the table converge under the unit to quickly pull formaldehyde and other fumes down and away from the operator. Roller System A body tray roller system allows the user to move the cadaver from a transport cart to the fixed embalming station without lifting the tray. Table The standard unit is a stationary table without casters. An optional movable table with casters (specify casters when placing order) has the same ventilation and quick-disconnect features for ventilation ducting, electric power, and table rinse. Tabletop The tabletop is sold separately. It consists of a No body tray over the roller system. For applications not requiring a drain, the No body tray may be used. Fluorescent Lighting The unit features one set of 48 (122 cm) double-tube fluorescent lights ULrated for damp locations. Drawer A locking instrument drawer is provided as a standard feature. Welding All welds utilize only stainless steel as a filler medium. All visible welds shall be ground smooth and regrained to match the #4 finish. Plumbing Hot and cold water fixtures with wrist-blade handles are factory installed. All external plumbing parts are brass with a heavy chrome-plating finish. Sink The sink portion of the unit is similar to the AN-68 series sinks. It provides a sturdy platform to hold the embalming machine. The unit includes specialized accessories required for embalming. Table Rinse Spray jets are evenly spaced along the length of the table for a complete rinse of the work area. Eyewash An emergency eyewash is provided as a standard feature. Hydro-aspirator Deluxe hydro-aspirator with reverse flow feature is supplied complete with control valve, vacuum breaker, and plastic tubing. All visible plumbing fittings shall be brass with a heavy bright chrome-plating. Hand Spray Assembly comes complete with spray nozzle, on/off control and flexible spray hose. A control valve is located on the backsplash to control water pressure. Vacuum Breaker Vacuum breakers protect the potable water supply. Duplex Receptacle A hospital-grade duplex GFCI (ground fault current interrupter) receptacle is provided on V units. This feature interrupts the electrical supply when a ground fault occurs to protect the user against electrical shock. A hospital-grade duplex receptacle is provided on V units. While this receptacle does not protect against shock, it is ready for the customer to connect it to an RCD (residual current device) which does protect against shock. Factory Tested All plumbing and electrical work is completed at the factory, and is tested prior to shipment. Acoustic Coating Applied to the underside to deaden sound and to prevent condensation, the coating is applied and then sealed with silver enamel paint. Optional Design Features 1. No. 820 Scale Support Bracket for No Post-mortem Scale or No Digital Post-mortem Scale. 2. Gas cock (No. 7310). 3. Air cock (No. 7310). 4. Grid plate surface on AN-95 Table which allows the table to be used for dissection. 5. Casters for AN-95 Table. Units may be customized to meet your specifications (contact your local Thermo Electron Corporation, Anatomical Pathology Sales Representative for details). Autopsy / Mortuary Embalming Stations Shandon AN-96 / 95

131 129 Shandon LM Series Downdraft Autopsy Tables Autopsy / Mortuary Autopsy Tables Shandon LM Series Shandon LM-1 The Shandon LM-1 is a basic model autopsy table designed for heavy-duty use; includes four (4) removable grid plates (see features on page 131 for details). An optional configuration with slats is also available. Shandon LM-1, with disposal V, 60 Hz Shandon LM-1, with disposal V, 50/60 Hz Shandon LM-1, without disposal V, 60 Hz Shandon LM-1, without disposal V, 50/60 Hz Shandon LM-4 The Shandon LM-4 is a height-adjustable autopsy table that allows you to raise and lower the tabletop over a 5 (12.7 cm) range; includes four (4) grid plates (see features on page 131 for details). An optional configuration with slats is also available (shown above). Shandon LM-4, with disposal V, 60 Hz Shandon LM-4, with disposal V, 50/60 Hz Shandon LM-4, without disposal V, 60 Hz Shandon LM-4, without disposal V, 50/60 Hz Shandon LM-1 Specifications Physical Specifications Dimensions (H x W x D) Unit: 36 x 102 x 29.5 (91.4 x x 74.9 cm) Sink: 9.7 x 14 x 12 (24.8 x 35.6 x 30.5 cm) Weight 650 lbs. (294.8 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for duplex receptacles. One circuit for units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s) for unit. Approx. pressure drop: inches w.g, ( mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units) Shandon LM-4 Specifications Physical Specifications Dimensions (H x W x D) Unit: x 102 x 29.5 ( x x 74.9 cm) Sink: 5 x 14 x 14 (12.7 x 35.6 x 35.6 cm) Weight 750 lbs. (340.2 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for duplex receptacles. One circuit for lift and units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s) for unit. Approx. pressure drop: inches w.g, ( mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units)

132 Shandon LM-8 The Shandon LM-8 is an efficient, compact autopsy / necropsy table (only 60", cm long) that offers the fine features of the larger models, but provides savings in floor space as well as cost. It is most often used in research facilities and areas where a small, but heavy-duty, table is required; includes three (3) removable grid plates (see features on page 131 for details). An optional configuration with slats is also available. Shandon LM-8, with disposal V, 60 Hz Shandon LM-8, with disposal V, 50/60 Hz Shandon LM-8, without disposal V, 60 Hz Shandon LM-8, without disposal V, 50/60 Hz Shandon LM-9 The Shandon LM-9 is designed with a built-in dissecting wing. The shape provides efficient use of space with two work stations in the L configuration and a common sink at the corner of the L ; includes four (4) removable grid plates (see features on page 131 for details). An optional configuration with slats is also available. Shandon LM-9, with disposal V, 60 Hz Shandon LM-9, with disposal V, 50/60 Hz Shandon LM-9, without disposal V, 60 Hz Shandon LM-9, without disposal V, 50/60 Hz Shandon LM-8 Specifications Physical Specifications Dimensions (H x W x D) Unit: 36 x 60 x 29.5 (91.4 x x 74.9 cm) Sink: 9.75 x 14 x 12 (24.8 x 35.6 x 30.5 cm) Weight 375 lbs. (170.1 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for duplex receptacles. One circuit for units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s) for unit. Approx. pressure drop: inches w.g, ( mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units) Shandon LM-9 Specifications Physical Specifications Dimensions (H x W x D) Autopsy Wing: 36 x 102 x 29.5 (91.4 x x 74.9 cm) Dissecting Wing: 36 x 60 x 24 (91.4 x x 61 cm) Sink: 9.75 x 14 x 12 (24.8 x 35.6 x 30.5 cm) Weight 900 lbs. (408.2 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for duplex receptacles. One circuit for units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s) for unit. Approx. pressure drop: inches w.g, ( mb) not including losses due to customer ductwork. 130 Autopsy / Mortuary Autopsy Tables Shandon LM Series Agency Approvals UL / cul ( V units) and CE ( V units)

133 131 Shandon LM Series Autopsy Tables Autopsy / Mortuary Shandon LM-10 The Shandon LM-10 table elevates and rotates. It allows the user the flexibility of vertical height adjustment and 180 degree rotation. Locking mechanism holds table securely in position. Tabletop can be raised or lowered over a full 5" (12.7 cm) range from 32" to 37" (81.3 to 94 cm) height above the floor. Includes three (3) removable grid plates (see features below for details). An optional configuration with slats is also available. Unit does not include a full sink. Shandon LM-10, with disposal V, 60 Hz Shandon LM-10, with disposal V, 50/60 Hz Shandon LM-10, without disposal V, 60 Hz Shandon LM-10, without disposal V, 50/60 Hz Shandon LM Series Features Grid Plate Work Surface The grids are fabricated of 18-gauge, type 304 stainless steel with a #4 finish. Each grid plate has two 11-gauge stainless steel stand-offs to provide fluid drainage. Pedestal Fabricated of 14-gauge, type 304 stainless steel with a #4 finish. The pedestal acts as an air plenum for the downdraft. The pedestal is also flanged on the interior with four inch (1.6 cm) diameter holes for mounting to facility floor. Downdraft Ventilation Integral downdraft ventilation assembly provides a passageway for fumes to be exhausted downward from the work surface through the pedestal of the table. See page 122 for details. Tabletop Fabricated of 14-gauge, type 304 stainless steel with a #4 finish and constructed with full 1 (2.54 cm) radius corners for easy cleaning and sanitation. All edges are flanged around the full perimeter along with a welded-in 14-gauge U -formed channel and angled cross supports providing maximum strength and durability. Acoustic Coating Applied to the underside to deaden sound and to prevent condensation, the coating is applied and then sealed with silver enamel paint. Welding All welds utilize only stainless steel as a filler medium. All visible welds shall be ground smooth and regrained to match the #4 finish. Plumbing All external plumbing parts are brass with a heavy chrome plating finish. Vacuum Breaker Vacuum breakers protect the potable water supply. Shandon LM-10 Specifications Physical Specifications Dimensions (H x W x D) Unit: x 88.5 x 29.5 ( x x 74.9 cm) Sink: Not applicable Weight 745 lbs. (337.9 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit duplex receptacles. One circuit for lift and units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer.\ Disposal 1/2 HP included on models and (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s) for unit. Approx. pressure drop: inches w.g, ( mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units) Sink A large single compartment sink is provided on the end of table. A leverhandle drain or a disposal is provided. Sink and lever-handle drain are not available on Shandon LM-10. Faucet Located at the end of the table, a hot/cold faucet is supplied with a swivel spout, built-in vacuum breaker and wrist-blade handles. Not available on Shandon LM-10. Built-In Table Rinse Built-in continuous flow table rinse with 10 spray nozzles, complete with vacuum breaker and flow control valve. Not available on Shandon LM-10. Hydro-aspirator Deluxe hydro-aspirator with reverse flow is supplied. It is complete with control valve, vacuum breaker, air gap and plastic tubing. Hand Spray All tables come with spray nozzle, on/off control valve located on the table base to control water pressure, and flexible spray hose. Shandon LM-10 has additional hot/cold water mixing valve on top of table at foot end. Duplex Receptacle A hospital-grade duplex GFCI (ground fault current interrupter) receptacle is provided on V units. This feature interrupts the electrical supply when a ground fault occurs to protect the user against electrical shock. A hospital-grade duplex receptacle is provided on V units. This receptacle does not protect against shock, however, it is ready for the customer to connect it to an RCD (residual current device) which does protect against shock. Optional Design Features 1. Five (5) 5 (12.7 cm) slats (No ) and one (1) 7 (17.8 cm) slat (No ) available for Shandon LM-1, LM-4, LM-9, and LM-10. Three (3) 5 (12.7 cm ) and one (1) 7 (17.8 cm) slats are available on the Shandon LM No. 820 Scale Support Bracket for No Post-mortem Scale or No Digital Post-mortem Scale. 3. Centimeter and/or inch/foot markings engraved on the edge of the tabletop. No centimeter; No inch/foot.

134 Perimeter Downdraft Autopsy Table 132 Double pedestal design allows the user to sit or stand during procedures. Exhaust connection is located at the top of the unit for connection to facility exhaust system. Manually adjustable damper regulates airflow and downdraft velocity. Flexible neoprene exhaust bellows allow height adjustment of table once connected to facility exhaust. Type 316 stainless steel construction. Includes five (5) stainless steel perforated work surface panels. Sloped drain pan prevents debris build-up. Provided with one duplex receptacle outlet (see page 131 for details). Vacuum-breaker, control valve, and two flush down manifolds below the work surface wash away debris and make cleaning easy. Includes a large, easily removable stainless steel sink with large radius corners, hot / cold faucet with swing spout and vacuum breaker, clear phenolic finish, hydro-aspirator system, and spray gun assembly with 8 feet of hose. The Perimeter Downdraft Autopsy Table is designed to provide a ventilated workstation for autopsy procedures. The table functions to pull fumes down and away from the user s face when connected to a negative air source, providing a healthier, safer work environment. Perimeter Downdraft Autopsy Table Specifications Perimeter Downdraft Autopsy Table V, 60 Hz B Perimeter Downdraft Autopsy Table V, 50/60 Hz B Physical Specifications Dimensions (H x W x D) x 100 x 36 ( x x 91.4 cm) Weight 675 lbs. (306.2 kg) Power Requirements V, 60 Hz and , 50/60 Hz units available Ventilation Call for details. Available Accessories* Thermoplastic cutting board, 0.5" x 12" x 18 (1.27 x 30.5 x 45.7 cm) Additional ground fault circuit interrupter (GFCI) receptacle One HP heavy duty disposal w/cold water solenoid valve Hydro-Aspirator system Eye wash hose/spray assembly ANSI approved deck mounted eye wash Additional hand spray assembly with recoil hose Hot and cold water mixing valve for spray gun Hot and cold water mixing valve for flush down/rinse manifold Detachable side shelf Detachable sliding instrument tray Quick read hanging dial scale and support bracket Fold down overhang extension Magnehelic velocity indicator Foot pedal faucet control in lieu of wrist blades Three-way diverter drain valve * Contents, Packaging, and Quantities of items listed under Available Accessories are subject to change without prior notice. Agency Approvals CE ( V units) Autopsy / Mortuary Autopsy Tables Perimeter Downdraft Autopsy Table

135 133 Shandon Transportable Dissecting Tables Autopsy / Mortuary Shandon AN-52 Hinged Hood Dissecting Table Ideal for use by medical schools where cadavers will be used for study. Hinged-hood model dissecting table features a unique locking assembly at each end to allow quick and secure locking of the hoods in the open position when desired. Key lock on hood provides security of contents. Completely portable, it is equipped with four (4) sturdy locking casters, table drain, and four (4) support sockets for optional book stands and leg supports. Unit also features a convenient table drain and is constructed of type 304 stainless steel with a #4 finish. Physical Specifications Dimensions (H x W x D) 46.3 x 88 x 30 (117.5 x x 76.2 cm) Weight 315 lbs. (142.9 kg) Shandon AN-52 Hinged-Hood Dissecting Table 152 Available Accessories Book Stand 1521 Adjustable Leg Rests Gallon (15.1 L) Stainless Steel Drain Pail 3681 Cadaver Handling Shandon AN-54 Transportable Dissecting Table Designed for use in medical schools and research laboratories, the Shandon AN-54 has a heavy-duty stainless steel tabletop and a removable stainless steel lower tray for holding a drain pail, instruments or other equipment. Four (4) heavy-duty swivel and locking casters are provided for easy movement and required stability when dissecting. Unit has a table drain and is constructed of type 304 stainless steel with a #4 finish. Physical Specifications Dimensions (H x W x D) 36 x 78 x 27 (91.4 x x 68.6 cm) Weight 210 lbs. (95.3 kg) Shandon AN-54 Transportable Dissecting Table with Shelf 154 Available Accessories Book Stand Gallon (15.1 L) Stainless Steel Drain Pail 3681 Adjustable Leg Rests available upon request. Transportable Dissecting Tables Shandon LM-12 Submersion Anatomy Table Shandon LM-12 Submersion Anatomy Table Most often used for cadaver storage in teaching facilities. This stainless steel model has a built-in cadaver submersion storage system with an integral cadaver platform that can be raised when needed for study and lowered for storage. Raising and lowering is accomplished through a two-position manual lifting mechanism. Table is provided with three (3) stainless steel channels that traverse the open top for temporary cadaver support. Physical Specifications Dimensions (H x W x D) 36 x 88.8 x 33.4 (91.4 x x 84.8 cm) Weight 395 lbs. (179.2 kg)

136 Shandon Cadaver Carriers 134 Shandon 465 Stretcher / Cadaver Carrier Shandon 465 Stretcher / Cadaver Carrier 465 Shandon 466 Elevating Stretcher / Cadaver Carrier Shandon 466 Elevating Stretcher / Cadaver Carrier 466 Shandon 825 Covered Cadaver Carrier Shandon 825 Covered Cadaver Carrier 825 Opaque Cover 8253 Canopy (includes naugahyde cover and cotton cord) This durable, economical cart is designed for multi-purpose use in the hospital and morgue. Tough 1.25" (3.2 cm) tubular stainless steel frame supports a stainless steel top. A heavy-duty rubber bumper protects the perimeter of the cart. Four (4) swivel casters permit easy movement. Locking mechanisms on two (2) of the casters hold the cart in place for stable loading. Unit is constructed of type 304 stainless steel with a #4 finish. Physical Specifications Dimensions (H x W x D) 34 x 71.5 x 26 (86.4 x x 66 cm) Weight 185 lbs. (83.9 kg) This durable, economical cart is designed for multi-purpose use in the hospital and morgue and includes convenient lifting mechanism. Tough tubular stainless steel frame supports a stainless steel top. Lifting mechanism permits vertical movement of the tabletop from 34" to 47.5" (86.4 to cm). A heavy-duty rubber bumper protects the perimeter of the cart. Four (4) swivel casters permit easy movement. Locking mechanisms on two (2) of the casters hold the cart in place for stable loading. Unit is constructed of type 304 stainless steel with a #4 finish. Physical Specifications Dimensions (H x W x D) x 71.5 x 26 ( x x 66 cm) Weight 195 lbs. (88.5 kg) Designed for discrete transport of cadavers. Two-piece unit includes a lightweight canopy and a sturdy, elevating gurney. After the body is positioned on the gurney, the canopy is placed on the unit. The neat, rectangular shape of the canopy conceals the body for transport. The canopy is made from stainless steel with a removable opaque fabric cover. The gurney is constructed from type 304 stainless steel. It uses a standard No or No body tray (sold separately; see page 142). The table can be raised and lowered via a no-slip crank. Physical Specifications Dimensions (H x W x D) x 75.5 x 25.6 ( x x 65 cm) Weight 200 lbs. (90.7 kg) Autopsy / Mortuary Cadaver Handling Cadaver Carriers

137 135 Shandon Cadaver Lift Autopsy / Mortuary Easy to operate. Highly maneuverable. Lightweight. Eliminates manual lifting. Cadaver Handling Shandon Cadaver Lift Capability Acts as adjustable-height transfer trolleys for moving laden body trays between storage units and autopsy tables, or within mortuaries and hospitals. Designed to extend from a minimum height of (34.2 cm) and provide access to the fourth tier of storage racks at (186 cm). Operation Shandon Cadaver Lift control system incorporates a scissor-action, hydraulic power lifting system, integral battery charger, and optional weighing module. Battery-operated hydraulic lifting system is activated by two (2) control switches to raise and lower body trays. Lift is supplied with an integral battery charger which can be connected to a standard mains socket, eliminating the need for charging stations. Weighing system is available as an optional item. Display and controls provide a simple, easy-to-use system with large text display. Construction Lift is manufactured using heavy-duty stainless steel tubular sections. Sprung ball transfer units are used to provide effortless body tray transfer. Lifts are designed to allow removal of body trays from all four (4) sides. Caution: Lifts are not recommended for use with ramps into refrigerators, freezers, other walk-in rooms, or for telescoping refrigerator racks without rollers. Shandon Cadaver Lift, 4-tier, with weighing capabilities B with battery-powered, dual voltage charger Shandon Cadaver Lift, 4-tier, without weighing capabilities B with battery-powered, dual voltage charger Body trays sold separately. Physical Specifications Unit Dimensions Width: (68 cm) Length: (233.5 cm) Collapsed Height: (34.2 cm) Extended Height: (186 cm) Weight Weight (uncrated) 350 lb (160 kg) Safe Weight Load: 507 lb (230 kg) Power Requirements 110/240 Vac, 50/60 Hz, 1 Ph Agency Approvals CSA / us, UL and CE See Shandon Body Trays on page 142.

138 Shandon AN-65 Series Cadaver Lift 136 Minimizes physical lifting and handling of the cadaver. Manual and self-propelled models are available. Configurations to manage varying body trays and tasks are available. Lifting Capacity: 1500 lbs. (680.4 kg) at 20" (50.8 cm) load center. Hydraulic lifting mechanism steadily raises and lowers loads. Maximum lifting height 90" (228.6 cm). Raise/lower lever, located between the chassis uprights, provides a fixed lifting speed and variable lowering speed (manual unit) or fixed lowering speed (self-propelled unit). Lift is fabricated from heavy plate and bar steel. Polyurethane wheels prevent marring of floors. Weight is approximately 2000 lbs. (907.2 kg). Plexiglass shield places a barrier between the operator and the chains and cylinder. Shandon AN-65 with Forks Unit uses two forks to raise and lower the load. Available as a self-propelled or a manual unit. Also available with spreader bar and strap assembly upon request. Shandon AN-65 Cadaver Lift, With Forks, Self-propelled Shandon AN-65 Cadaver Lift, With Forks, Manual Shandon AN-65-CH with Spreader Bars and Chains Available as a self-propelled or manual unit. Uses chains and spreader bars to lift standard No or No body trays (sold separately; see page 142); chains attach easily to body tray; also available with spreader bars and strap assembly upon request. Designed to move trays to and from mortuary refrigerators. Shandon AN-65-CH Cadaver Lift with Spreader Bars and Chains, Self-propelled Shandon AN-65-CH Cadaver Lift Spreader Bars and Chains, Manual Shandon AN-65-P with Pallet Available as a self-propelled or manual unit. Designed to transfer body trays from the AN-80 Mortuary Rack or a mortuary refrigerator with rollers to the AN-49-RT Transportable Autopsy Table. When used in conjunction with AN-49-RT Transportable Autopsy Table and AN-80 Mortuary Rack, manual lifting and handling of the load is eliminated. Shandon AN-65-P Cadaver Lift with Pallet, Self-propelled Shandon AN-65-P Cadaver Lift with Pallet Manual Autopsy / Mortuary Cadaver Handling Shandon AN-65 Series Lift

139 137 Shandon AN-30 Series Cadaver Lift Autopsy / Mortuary Heavy duty, no-slip, quiet winch ratchet system with a floor to 10' (304.8 cm) lift range, depending on the cadaver-handling option. Transports and positions loads up to 1,000 lbs. (453.6 kg). Heavy-duty telescoping mast system moves smoothly. No tools are required for assembly. Short turning radius for easy maneuverability. Shandon AN-30 with Standard Forks Standard internal safety brake prevents backlash in raising or lowering loads. Narrow design enables the unit to fit through a standard 32" (81.3 cm) door. To store, the legs fold up and the load-lifting attachments are easily removed. Shandon AN-30-P with Pallet Cadaver Handling General lifting purposes. Shandon AN-30 Lift with Standard Forks Features a pallet with a roller system to move standard body tray (No or No sold separately; see page 142). Pallet is constructed of stainless steel. Shandon AN-30 Series Lift Physical Specifications Unit Dimensions Height Minimum: Height Maximum: Length Operating: Length Stowed: Leg Width Minimum: Leg Width Maximum: Minimum fork spread: Maximum fork spread: Ground Clearance: Weight 303 lbs. (137.4 kg) 78.5 (199.4 cm) 117 (297.2 cm) with forks inverted 57.5 (146.1 cm) 29 (73.7 cm) 31.5 (80 cm) 58 (147.3 cm) 11.5" (29.2 cm) 30" (76.2 cm) 2 (5.1 cm) Shandon AN-30-P Lift with Pallet Physical Specifications Unit Dimensions Height Minimum: 78.5 (199.4 cm) Height Maximum: 117 (297.2 cm) with forks inverted Length Operating: 57.5 (146.1 cm) Length Stowed: 29 (73.7 cm) Leg Width Minimum: 31.5 (80 cm) Leg Width Maximum: 58 (147.3 cm) Pallet Dimensions (H x W x D) 5.8 x 77.5 x 27 (14.6 x 68.6 x cm) Weight 418 lbs. (189.6 kg)

140 138 Shandon AN-30-CH with Spreader Bars and Chains Shandon AN-30-ST with Spreader Bar and Strap Assembly Chains attach to hand slots of standard body tray (No or No sold separately; see page 142). Especially well suited for side-opening refrigerators. Spreader bars and chains are constructed of stainless steel. Shandon AN-30-CH with Spreader Bars and Chains Physical Specifications Unit Dimensions Height Minimum: 78.5 (199.4 cm) Height Maximum: 117 (297.2 cm) with forks inverted Length Operating: 57.5 (146.1 cm) Length Stowed: 29 (73.7 cm) Leg Width Minimum: 31.5 (80.0 cm) Leg Width Maximum: 58 (147.3 cm) Assembly Dimensions Length: 80.5 (204.5 cm) Width: 16.5 (41.9 cm) Chain Depth: 26.4 (67.0 cm) Adjustable Center Distances between Chains 77.5 ; 69.5 ; 61.5 ; 53.5 (196.9; 176.5; 156.2; cm) Weight 348 lbs. (157.9 kg) Effective for moving cadavers without body trays. Three (3) polypropylene straps support load. Straps adjust at 5" (12.7 cm) intervals with a total range of 25" (63.5 cm). Spreader bar is constructed of stainless steel. Shandon AN-30-ST with Spreader Bar and Strap Assembly Physical Specifications Unit Dimensions Height Minimum: Height Maximum: Spreader Bar Length: Length Operating: Length Stowed: Width: Looped Strap Maximum Length: Weight 353 lbs. (160.1 kg) 78.5 (199.4 cm) 117 (297.2 cm) 48 (121.9 cm) 57.5 (146.1 cm) 29 (73.7 cm) 58 (147.3 cm) 36 (91.4 cm) Autopsy / Mortuary Cadaver Handling Shandon AN-30 Series Lift

141 139 Shandon Mortuary Racks Autopsy / Mortuary Shandon LML-20 Two-Cadaver Litter Designed to store bodies in Shandon LMR-LO Series and walk-in mortuary refrigerators. Convenient litter holds two standard body trays in no-slip saddles. Unit has four (4) heavy-duty 6" (15.2 cm) swivel casters for easy movement. All four (4) casters have swivel and brake locking mechanism. This litter may be used with the AN- 30 or the AN-65 Series Cadaver Lifts. Unit may be customized to hold AN-49 table tops. Call for details. Shandon LML-20 Two Cadaver Litter Physical Specifications Dimensions (H x W x D) 32 x 73.6 x 25 (81,3 x x 63.5 cm) Weight 150 lbs. (68 kg) Trays to Fit Litter Body Tray without Drain Hole Body Tray with Drainage Hole and Stopper Cadaver Handling / Storage Shandon AN-61 Portable Mortuary Rack Designed to store bodies in walk-in mortuary refrigerators. Convenient, movable and sturdy, the AN-61 Portable Mortuary Rack securely holds up to four (4) body trays. It is fabricated from type 304 stainless steel. Open design allows for maximum accessibility to trays. Four (4) heavy-duty 8" (20.3 cm) diameter swivel and locking casters move easily; in the locked position, they hold the rack securely for loading and unloading. Rubber bumpers cushion contact with walls during transport of unit. This rack may be used with the Shandon AN-30 or AN-65 Series Cadaver Lifts. Unit may be customized to hold AN-49 table tops. Call for details. Shandon AN-61 Portable Mortuary Rack Mortuary Racks Physical Specifications Dimensions (H x W x D) 68.5 x 52.5 x 28.3 (174 x x 71.9 cm) Weight 270 lbs. (122.5 kg) Trays to Fit Litter Body Tray without Drain Hole Body Tray with Drainage Hole and Stopper 82619

142 140 Shandon AN-70 Mortuary Rack AN-70 Specification Chart Sturdy free-standing rack for cadaver storage in a refrigerated room. Sturdy, heavy-gauge type 304 stainless steel construction. Excellent unit for walk-in refrigerators. Adjustable 11-gauge stainless steel tray supports provide flexibility for your facility. Tray supports may be adjusted to fit your facility s requirements; the factory suggested spacing is 18" (45.7 cm) increments. The lowest tray support is permanently welded to the frame for additional strength. Units are available to accommodate No and No body trays and AN-49 transportable autopsy tabletops. Available in 4-tier and 5-tier sizes. Configure unit as free-standing for flexibility or secure to flooring for added stability. Top and bottom shelves are accessible with the AN-30 lift. Number of Storage Unit Total Length Unit Unit Maximum Height of Order Tiers Tray Length with Tray Width Height Height Bottom Tray Number of Top Tray (Fixed Height) 4 No or 48.4" 77.5" 28.3" 70.3" 64.9" 6.9" No (123.0 cm) (196.9 cm) (71.8 cm) (178.6 cm) (164.8 cm) (17.6 cm) 4 AN-49 53" 80" 41.3" 70.3" 64.9" 6.9" Tabletop (134.6 cm) (203.2 cm) (104.9 cm) (178.6 cm) (164.8 cm) (17.6 cm) 5 No or 48.4" 77.5" 28.3" 87.5" 82.9" 6.9" No (123.0 cm) (196.9 cm) (71.8 cm) (222.3 cm) (210.5 cm) (17.6 cm) 5 AN-49 53" 80" 41.3" 87.5" 82.9" 6.9" Tabletop (134.6 cm) (203.2 cm) (104.9 cm) (222.3 cm) (210.5 cm) (17.6 cm) Autopsy / Mortuary Cadaver Handling / Storage Mortuary Racks

143 141 Autopsy / Mortuary Cadaver Handling / Storage Mortuary Racks Shandon AN-80 Mortuary Rack Shandon AN-80 Mortuary Rack, one bay, 4-tier Physical Specifications One Bay, 4-Tier Unit Dimensions (H x W x D) 75 x 79.4 x 29 (190.5 x x 73.7 cm) Trays to Fit Rack Body Tray without Drain Hole Body Tray with Drainage Hole and Stopper Shandon AN-81 Multi-Body Tray Carrier Shandon AN-81 Multi-Body Tray Carrier, 2-tier unit Shandon AN-81 Multi-Body Tray Carrier, 4-tier unit Physical Specifications Dimensions (H x W x D) 2-Tier Unit: 49.5 x 77.5 x 30 (125.7 x x 76.2 cm) 4-Tier Unit: 74 x 77.5 x 30 (188 x x 76.2 cm) Stainless steel racking system saves floor space and uses standard body trays for convenient handling. Available in various heights and widths to accommodate body trays. Standard rack has four (4) tiers. Uses standard body trays (No or No ). Trays are sold separately. Ten (10) maintenance-free bearings support each body tray. Available as open mortuary rack or enclosed with doors and side panels. Clamping method adjusts racks easily. Easy to install. Also easy to disassemble and relocate if necessary. Comes with preassembled parts and easy-to-install instructions. Free-standing or attached to floor or wall. Pads provided for floor attachments. Rubber bumpers at the rear of the unit cushion contact when loading body trays. Can be used to move and store cadavers. Unit can be used in conjunction with the Shandon AN-80 Mortuary Rack System so that trays can easily be rolled between the carrier and the storage rack. Available in 2- or 4-body capacities. Ten (10) maintenance-free bearings support each body tray. Four (4) heavy-duty swivel and locking casters make moving the unit easy; casters lock when stability is required for loading and unloading. Heavy-duty stainless steel construction will stand up to years of use. Rubber bumpers at the rear of the unit cushion contact when loading body trays. Trays to Fit Rack Body Tray without Drain Hole Body Tray with Drainage Hole and Stopper 82619

144 Shandon Body Trays 142 Shandon Stainless Steel Body Trays Body Tray without drain hole Body Tray with drainage hole and stopper Shandon X-Tray X-Rayable Body Trays Shandon X-Tray X-rayable Body Tray, Gray Shandon X-Tray X-rayable Body Tray, Blue Shandon X-Rayable Fiberglass Body Tray Shandon X-rayable Fiberglass Body Tray B Designed for use with mortuary racks, mortuary refrigerators and some dissecting tables and cadaver carriers. Sturdy stainless steel construction. Two hand-holds on each end allow for manageable lifting of tray. Inside corners are smoothly finished for strength. Available with or without drainage hole and stopper. Supports up to 350 lbs. (158.8 kg) Tray dimensions (H x W x D): 2.9 x 77.4 x 23.1 (7.5 x x 58.7 cm) Tray dimensions (H x W x D): 2.9 x 77.4 x 23.1 (7.5 x x 58.7 cm). Made from durable, non-porous plastic. X-ray cassettes fit in a slot on the underside of the tray. Use the tray on its own or as the tabletop for an AN-49 Series Autopsy Table. Tray dimensions (H x W x D): 4.9 x 80 x 31 (12.4 x x 78.7 cm). Removable, X-rayable tabletop for use with perimeter downdraft or non-ventilated autopsy tables, cadaver lifts, cadaver carriers, and cadaver storage racks that have roller systems to eliminate manual lifting. Sloped work surface configured for positive drainage with large cadavers. Inside corners with 0.75 (1.9 cm) radii for easy cleaning. Includes 2 (5.1 cm) diameter drain hole with one rubber lab stopper assembly. Greystone color; other colors available upon request (call for details). Tray dimensions (H x W x D): 4.8 x 77.1 x 30.9 (12.1 x x 78.4 cm). Weight: 30 lbs. (13.6 kg). Maximum weight capacity: 500 lbs. (226.8 kg). Autopsy / Mortuary Cadaver Handling / Storage Body Trays

145 143 Shandon Body Bags Shandon Disaster Pouch Shandon Heavy-Duty Vinyl Bag Autopsy / Mortuary Cadaver Storage Holds up to 450 lbs. (204.1 kg). Dimensions: 90 L x 36 W x 72 Girth (228.6 x 91.4 x cm); 20 mil thickness. Available with zipper-around-edge or down the center. Pouches with zipper in center open in either direction for selective opening and closing. Pouches with zipper around two edges allow for easy handling of cadaver. Especially convenient for situations that require special lifting. Heavy-gauge material with six polypropylene handles is extremely durable and tear-resistant. Nylon vinyl coating make the bag acid-proof, leak resistant, and formaldehyde proof. Pkg/Qty Shandon Disaster Pouch, Center Zipper Each Shandon Disaster Pouch, Side Zipper Each Shandon Wrap-Around Cadaver Cover Full-length zipper in center. Sturdy opaque white material. Protects cadaver from exposure. Adult Size dimensions: 89 x 35 (226.1 x 88.9 cm); 7 mil thick. Child Size dimensions: 45 x 27.5 (114.3 x 69.9 cm); 9 mil thick. Infant Size dimensions: 27.5 x 20 (69.9 x 50.8 cm); 7 mil thick. Infant size includes two (2) toe tags and biohazard tag. Pkg/Qty Shandon Heavy-Duty Vinyl Bag, Adult Size Each 848 Shandon Heavy-Duty Vinyl Bag, Child Size Each 852 Shandon Heavy-Duty Vinyl Bag, Infant Size Each 851 Shandon Plastic Cadaver Bag Bags and Pouches Use to wrap around cadaver. Sturdy opaque white vinyl with elastic perimeter fits standard hospital beds and gurneys. Moisture-proof. Dimensions: 93 L x 44 W (236.2 x cm); 5 mil thickness. Clear plastic bag is well suited for protecting cadavers from prolonged exposure to atmosphere. Especially convenient for teaching facilities or anywhere cadavers are stored on wall hooks. Made from heavy 5-mil plastic sheeting with electronically welded seams. Economical. Packaged 12 per carton. Dimensions: 102 L x 38 W (259.1 x 96.5 cm); 5 mil thickness. Pkg/Qty Shandon Plastic Cadaver Bag 12 / Carton 849 Pkg/Qty Shandon Wrap-Around Cadaver Cover Each 847

146 Shandon Forensic Evidence Cabinet 144 Corrosion proof interior is made from fiberglass. Door is made from clear Lexan. Coat rack is made from stainless steel. Door handle accepts padlock. Low air flow alarms. Ductless design. Built-in drain. Convenient wash down with installed hose; locate unit over drain or use optional pump to remove waste water. Easy installation and relocation. Formalin sterilization is available (sold separately). Separate closets are recommended for evidence from each individual. Optional shelves are autoclavable stainless steel. 5 filters keep dust and dirt from entering the unit and keep odor, dust and dirt from escaping unit. Filters are easy to load and unload; no tools required. Pre-filters are located outside the cabinet allowing them to be changed without disturbing evidence. Visual safety alarms alert staff when filter replacement is required. Specific alarms activate for door prefilter, HEPA filter and after-filter. Dry wet evidence while controlling odors, providing safe storage, and preventing cross-contamination. Designed to dry and store a variety of evidence items in a controlled environment. Protects personnel from the odors and particulates generated during the drying and/or decaying of organic matter. Shandon Forensic Evidence Cabinet Specifications Shandon Forensic Evidence Cabinet V Shandon Forensic Evidence Cabinet V Shandon Forensic Evidence Cabinet V Shandon Forensic Evidence Cabinet V Physical Specifications Dimensions (H x W x D) 84 x 30 or 60 x 24 (213.4 x 76.2 or x 61 cm) Weight 30 Uncrated lbs. (93.9 kg) 60 Uncrated lbs. (187.8 kg) Power Requirements VAC, 50/60 Hz; VAC, 50/60 Hz Included with Product* Hose with Handspray * Contents, Packaging, and Quantities of items listed under Included with Product are subject to change without prior notice. Available Accessories Pkg/Qty Particulate Prefilter 10 / Pk Particulate After-filter Each HEPA Filter Each Chemisorptive Carbon Filter Each Plumbing Kit Each Stainless Steel Shelves 3 / Set PVC Garment Separator, White Each Formalin Sterilization Unit Each After-Filter Activated Charcoal Filter HEPA Filter Prefilter Prefilter Filter Technology State-of-the-art adsorption technology combines a particulate prefilter with either chemisorptive carbon, activated carbon, or HEPA filters. Multiple technologies may be required to handle a wide range of applications. Selection depends on the type of contaminant to be removed. Consult your Thermo Electron Sales Representative for details on filter selection. Autopsy / Mortuary Forensics Shandon Forensic Evidence Cabinet

147 145 Shandon Refrigeration Shandon LMR-SO Series Side-Opening Refrigerators Autopsy / Mortuary Refrigerators featuring a side-opening configuration. Models are available in capacities of 1-3 bodies. Each compartment is fitted with a heavy-duty 24" (61.0 cm) telescoping mechanism to accommodate Shandon body trays. This type of refrigerator works well in spaces where clearance in front of the unit is limited. Refrigeration Shandon LMR-SO Series Standard Features Insulation: 3.5" (8.9 cm) foamed-in-place polyurethane (UL Listed, Class 1) ozone friendly. Refrigerant: R404A; ozone friendly. Framing: Seasoned wood frame; tongue-and-groove construction. Doors: In-fitting, flush doors with magnetic gasket, commercialgrade chrome-plated hardware and perimeter heater in frame. Exterior is fabricated from 20 gauge stainless steel with a #4 finish. Front Exterior Wall Finish: 20 gauge stainless steel with a #4 finish. Exterior Sides and Back Panel: 20 gauge stucco-embossed aluminum. Interior Finish: 20 gauge stucco-embossed aluminum. Racks: 3-piece, stainless steel telescoping racks. Racks extend 24" (60.96) and are capable of supporting a body tray and cadaver at full extension. Assembly: Camlock. Electronic Temperature Control: digital readout, high / low audio / visual alarms, and contacts for remote alarm connection. Lighting: Vapor-proof incandescent light with lighted rocker switch. Refrigeration Condensing Unit: Self-contained indoor (outdoor or remote available as a custom). Standard Temperature: 38 F (3.3 C) ±2.5. Plumbing: Floor drain for condensate required. Agency Listing: UL Class 1 listing for Surface Burn Characteristics. CE certified. Built to comply with international safety standards. Custom units available upon request. Body Trays and are available separately as accessories to the LMR-SO Series. Shandon LMR-1-SO single body capacity V, 60 Hz 1190 Shandon LMR-2-SO 2-body capacity V, 60 Hz 2190 Shandon LMR-3-SO 3-body capacity V, 60 Hz 3190 Custom Units available upon request. Trays to Fit Refrigerator Body Tray without Drain Hole Body Tray with Drainage Hole and Stopper 82619

148 LMR-1-SO Side-Opening Refrigerator Order No Configuration Stationary Capacity 1 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside Dimensions (W x D x H) 95.5" x 39" x 54" (242.6 x 99.1 x cm) Door Opening Dimensions (W x H) (1) 83.5" x 21" (212.1 x 53.3 cm) Power V/1Ph/60Hz (International voltages available for all components) Compressor 110/120V, 0.5 HP, 4, F 25 F Evap. Temp., 12.4 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.9 Amps Racks (1) Telescoping Extruded Aluminum 24" (61.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 1120 lbs. (508 kg) LMR-2-SO Side-Opening Refrigerator Order No Configuration Stationary Capacity 2 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside Dimensions (W x D x H) 95.5" x 39" x 80.25" (242.6 x 99.1 x cm) Door Opening Dimensions (W x H) (2) 83.5" x 21" (212.1 x 53.3 cm) Power V/1Ph/60Hz (International voltages available for all components) Compressor V, 0.5 HP, 4, F 25 F Evap. Temp., 12.4 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.9 Amps Each Racks (2) Telescoping 24" (61.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 1575 lbs. (714.4 kg) LMR-3-SO Side-Opening Refrigerator Order No Configuration Stationary Capacity 3 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside Dimensions (W x D x H) 95.5" x 39" x 106.5" (242.6 x 99.1 x cm) Door Opening Dimensions (W x H) (3) 83.5" x 21" (212.1 x 53.3 cm) Power V/1Ph/60Hz (International voltages available for all components) Compressor V, 0.5 HP, 4, F Evap. Temp., 12.4 Amps Evaporator Coil 110-/120V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.9 Amps Each Racks (3) Telescoping 24" (61.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 2580 lbs. ( kg) 146 Autopsy / Mortuary Refrigeration Shandon LMR-SO Series

149 147 Autopsy / Mortuary Shandon LMR-LO Series Low-Opening Refrigerators This series of refrigerators uses a low-opening configuration with a ramp to conveniently accommodate two-body style cadaver carriers. Standard models are available in capacities of 2-9 bodies. Custom configurations are available to meet any required capacity. Some models also feature top compartments with heavy-duty 3-piece telescoping mechanisms for Shandon body trays. Refrigeration Shandon LMR-LO Series Standard Features Insulation: 3.5" (8.9 cm) foamed-in-place polyurethane (UL Listed, Class 1) ozone friendly. Refrigerant: R404A; ozone friendly. Framing: Seasoned wood frame; tongue-and-groove construction. Doors: In-fitting, flush doors with magnetic gasket, commercialgrade chrome-plated hardware and perimeter heater in frame. Exterior is fabricated from 20 gauge stainless steel with a #4 finish. Front Exterior Wall Finish: 20 gauge stainless steel with a #4 finish. Exterior Sides and Back Panel: 20 gauge stucco-embossed aluminum. Interior Finish: 20 gauge stucco-embossed aluminum. Racks: 3-piece, stainless steel telescoping racks are installed on the top level of two-level refrigerators; racks extend 76 (193.0 cm) and are capable of supporting a body tray and cadaver at full extension or locking closed to allow tray to roll out separately. Assembly: Camlock. Electronic Temperature Control: digital readout, high / low audio / visual alarms, and contacts for remote alarm connection. Lighting: Vapor-proof incandescent light with lighted rocker switch. Refrigeration Condensing Unit: Self-contained indoor (outdoor or remote available as a custom). Standard Temperature: 38 F (3.3 C) ±2.5. Plumbing: Floor drain for condensate required. Agency Listing: UL Class 1 listing for Surface Burn Characteristics. CE certified. Built to comply with international safety standards. Custom units available upon request. Body Trays and are available separately as accessories to the LMR-LO Series. Shandon LMR-2-LO 2-body capacity V, 60 Hz 2120 Shandon LMR-3-LO 3-body capacity V, 60 Hz 3120 Shandon LMR-4-LO 4-body capacity V, 60 Hz Shandon LMR-6-LO 6-body capacity V, 60 Hz Shandon LMR-9-LO 9-body capacity V, 60 Hz Custom Units available upon request. Trays to Fit Refrigerator Body Tray without Drain Hole Body Tray with Drainage Hole and Stopper 82619

150 LMR-2-LO Low-Opening Refrigerator Order No Configuration Stationary Capacity 2 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R-404A Outside 39" x 95.5" x 75.25" Dimensions (99.1 x x cm) (L x D x H) Door Opening (1) 27.5" x 51" Dimensions (69.9 x cm) (W x H) Power V/1Ph/60Hz Call for info on international voltage models Compressor 110/120V, 0.5 HP,4, F Evap. Temp., 12.4 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.4 Amps Racks None Uses LML-20 Carrier (Sold Separately) Gasket Magnetic Plumbing Drain Required Crated Weight 1400 lbs. (635 kg) LMR-4-LO Low-Opening Refrigerator Order No Configuration Stationary Capacity 4 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R-404A Outside 73" x 95.5" x 75.3" Dimensions (185.4 x x cm) (L x D x H) Door Opening (2) 27.5" x 51" Dimensions (69.9 x cm) (W x H) Power V/1Ph/60Hz (Some components V) Call for info on international voltage models Compressor V, 0.75 HP, 7, F Evap. Temp., 8.8 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.8 Amps Racks None Uses two LML-20 Carrier (Sold Separately) Gasket Magnetic Plumbing Drain Required Crated Weight 2100 lbs. (953 kg) LMR-9-LO Low-Opening Refrigerator Order No Configuration Stationary Capacity 9 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R-404A Outside Dimensions (L x D x H) 107" x 95.5" x 101.5" (271.8 x x cm) Door Opening Dimensions (W x H) (3) 27.5" x 21" (69.9 x 53.3cm) (3) 27.5" x 51" (69.9 x cm) Power V/1Ph/60Hz (Some components V) Call for info on international voltage models Compressor V, 1 HP, 8, F Evap. Temp., 12.5 Amps Evaporator Coil V, 4.0 Amps Light V, 0.8 Amps Door Heaters V, 2.1 Amps Racks (3) Telescoping 76" (193.0 cm) Lower levels each use (3) LML-20 Carrier (sold separately) Gasket Magnetic Plumbing Drain Required Crated Weight 3575 lbs. (1621 kg) LMR-3-LO Low-Opening Refrigerator Order No Configuration Stationary Capacity 3 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R-404A Outside 39" x 95.5" x 101.5" Dimensions (99.1 x x cm) (L x D x H) Door Opening (1) 27.5" x 21" (69.9 x 53.4 cm) Dimensions (1) 27.5" x 51" (69.9 x cm) (W x H) Power V/1Ph/60Hz Call for info on international voltage models Compressor V, 0.5 HP, 4, F Evap. Temp., 12.4 Amps Evaporator Coil 110/120V, 2.0 Amps Light 110/120V, 0.8 Amps Door Heaters 110/120V, 0.7 Amps Racks (1) Telescoping 76" (193.0 cm) Lower level uses LML-20 Carrier (Sold Separately) Gasket Magnetic Plumbing Drain Required Crated Weight 2120 lbs. (961 kg) LMR-6-LO Low-Opening Refrigerator Order No Configuration Stationary Capacity 6 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R-404A Outside 73" x 95.5" x 101.5" Dimensions (185.4 x x cm) (L x D x H) Door Opening (2) 27.5" x 21" (69.9 x 53.4 cm) Dimensions (2) 27.5" x 51" (69.9 x cm) (W x H) Power V/1Ph/60Hz Call for info on international voltage models Compressor V, 0.75 HP, 7, F Evap. Temp., 8.8 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 1.4 Amps Racks (2) Telescoping 76" (193.0 cm) Lower levels each use LML-20 Carrier (Sold Separately) Gasket Magnetic Plumbing Drain Required Crated Weight 2600 lbs. ( kg) 148 Autopsy / Mortuary Refrigeration Shandon LMR-LO Series

151 149 Shandon LMR-EO Series End-Opening Refrigerators Autopsy / Mortuary This series of refrigerators features an end-opening configuration. Standard models are available in capacities of 1-18 bodies. Custom configurations are available to meet any required capacity. Each compartment is fitted with a heavy-duty 3-piece telescoping mechanism to accommodate Shandon body trays. End-opening refrigerators are the most space efficient in an area where a 7' (213.4 cm) clearance is available at the front of the unit for loading and unloading. Refrigeration Shandon LMR-EO Series Standard Features Insulation: 3.5" (8.9 cm) foamed-in-place polyurethane (UL Listed, Class 1) ozone friendly. Refrigerant: R404A; ozone friendly. Framing: Seasoned wood frame; tongue-and-groove construction. Doors: In-fitting, flush doors with magnetic gasket, commercialgrade chrome-plated hardware and perimeter heater in frame. Exterior is fabricated from 20 gauge stainless steel with a #4 finish. Front Exterior Wall Finish: 20 gauge stainless steel with a #4 finish. Exterior Sides and Back Panel: 20 gauge stucco-embossed aluminum. Interior Finish: 20 gauge stucco-embossed aluminum. Racks: 3-piece, stainless steel telescoping racks; racks extend 76 (193.0 cm) and are capable of supporting a body tray and cadaver at full extension or locking closed to allow tray to roll out separately. Assembly: Camlock. Electronic Temperature Control: digital readout, high / low audio / visual alarms, and contacts for remote alarm connection. Lighting: Vapor-proof incandescent light with lighted rocker switch. Refrigeration Condensing Unit: Self-contained indoor (outdoor or remote available as a custom). Standard Temperature: 38 F (3.3 C) ±2.5. Plumbing: Floor drain for condensate required. Agency Listing: UL Class 1 listing for Surface Burn Characteristics. CE certified. Built to comply with international safety standards. Custom units available upon request. Body Trays and are available separately as accessories to the LMR-EO Series. Shandon LMR-1-EO single body capacity V, 60 Hz 150 Shandon LMR-2-EO 2-body capacity V, 60 Hz 250 Shandon LMR-3-EO 3-body capacity V, 60 Hz 3500 Shandon LMR-4-EO 4-body capacity V, 60 Hz Shandon LMR-6-EO 6-body capacity V, 60 Hz Shandon LMR-8-EO 8-body capacity V, 60 Hz Shandon LMR-9-EO 9-body capacity V, 60 Hz Custom Units available upon request. Trays to Fit Refrigerator Body Tray without Drain Hole Body Tray with Drainage Hole and Stopper 82619

152 150 LMR-1-EO End-Opening Refrigerator Order No. 150 Configuration Stationary Capacity 1 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside 39" x 95.5" x 54" Dimensions (99.1 x x cm) (W x D x H) Door Opening (1) 27" x 21" (68.6 x 53.3 cm) Dimensions (W x H) Power V/1Ph/60Hz (International voltages available for all components) Compressor V, 0.5 HP, 4, F Evap. Temp., 12.4 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.3 Amps Racks (1) Telescoping 76" (193.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 1120 lbs. (508 kg) LMR-3-EO End-Opening Refrigerator Order No Configuration Stationary Capacity 3 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside 39" x 95.5" x 106.5" Dimensions (99.1 x x cm) (W x D x H) Door Opening (3) 27" x 21" Dimensions (68.6 x 53.3 cm) (W x H) Power 110/120V/1Ph/60Hz (International voltages available for all components) Compressor V, 0.5 HP 4, F Evap. Temp., 12.4 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.3 Amps Each Racks (3) Telescoping 76" (193.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 2430 lbs. ( kg) LMR-2-EO End-Opening Refrigerator Order No. 250 Configuration Stationary Capacity 2 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside 39" x 95.5" x 80.3" Dimensions (99.1 x x cm) (W x D x H) Door Opening (2) 27" x 21" (68.6 x 53.3 cm) Dimensions (W x H) Power V/1Ph/60Hz (International voltages available for all components) Compressor V, 0.5 HP, 4, F Evap. Temp., 12.4 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.3 Amps Each Racks (2) Telescoping 76" (193.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 1575 lbs. (714.4 kg) LMR-4-EO End-Opening Refrigerator Order No Configuration Stationary Capacity 4 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside 73" x 95.5" x 80.3" Dimensions (185.4 x x cm) (W x D x H) Door Opening (4) 27" x 21" Dimensions (68.6 x 53.3 cm) (W x H) Power V/1Ph/60Hz (Some components V) (International voltages available for all components) Compressor V, 0.75 HP, 7, F Evap. Temp., 8.8 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.3 Amps Each Racks (4) Telescoping 76" (193.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 2800 lbs. ( kg) Autopsy / Mortuary Refrigeration Shandon LMR-EO Series

153 151 Autopsy / Mortuary LMR-6-EO End-Opening Refrigerator Order No Configuration Stationary Capacity 6 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside 73" x 95.5" x " Dimensions (185.4 x x cm) (W x D x H) Door Opening (6) 27" x 21" Dimensions (68.6 x 53.3 cm) (W x H) Power V/1Ph/60Hz (Some components V) (International voltages available for all components) Compressor V, 0.75 HP, 7, F Evap. Temp., 8.8 Amps Evaporator Coil V, 2.0 Amps Light V, 0.8 Amps Door Heaters V, 0.3 Amps Each Racks (6) Telescoping 76" (193.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 3250 lbs. ( kg) See Shandon Cadaver Lifts on pages Refrigeration LMR-8-EO End-Opening Refrigerator Order No Configuration Stationary Capacity 8 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside Dimensions (W x D X H) 141" x 95.5"x 80.25" (358.1 x x cm) Door Opening Dimensions (W x H) (8) 27" x 21" (68.6 x 53.3 cm) Power V/1Ph/60Hz (Some components V) Compressor V, 1 HP, 8, F Evap. Temp., 12.5 Amps Evaporator Coil V, 4.0 Amps Light V, 0.8 Amps Door Heaters V, 0.3 Amps Each Racks (8) Telescoping 76" (193.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 4450 lbs. ( kg) Shandon LMR-EO Series LMR-9-EO End-Opening Refrigerator Order No Configuration Stationary Capacity 9 Body Insulation Ozone Friendly 3.5" (8.9 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R404A Outside Dimensions (W x D X H) 107" x 95.5" x 106.5" (271.8 x x cm) Door Opening Dimensions (W x H) (9) 27" x 21" (68.6 x 53.3 cm) Power V/1Ph/60Hz (Some components V) Compressor V, 1 HP, 8, F Evap. Temp., 12.5 Amps Evaporator Coil V, 4.0 Amps Light V, 0.8 Amps Door Heaters V, 0.3 Amps Each Racks (9) Telescoping 76" (193.0 cm) Gasket Magnetic Plumbing Drain Required Crated Weight 4625 lbs. ( kg)

154 152 Shandon Mobile-Mort Shandon Mini-Mort For laboratory or mortuary use where overcrowding, initial cost and installation restrictions are a major concern. Provides same capacity as a conventional two-body unit. Excellent for emergency preparedness. Uses 110/120V outlet (220/240V unit also available). All-weather compressor housing (No. 2184) is available to protect compressor during field use. Use the unit as a stationary unit with the optional stationary leg kit (No. 2182). In instances where it is not possible to provide a drain, a condensate evaporation pan may be used. Mobile Mort Order No Configuration Transportable Capacity 2 Body Insulation Ozone Friendly 2" (5.1 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R-404A Outside 86.5" x 32" x 55" Dimensions (219.7 x 81.3 x cm) (W x D x H) Door Opening (1) 25.5" x 32" Dimensions (64.8 x 81.3cm) (W x H) Power V/1Ph/60Hz Call for info on international voltage models Compressor V, 0.5 HP, 4, F Evap. Temp., 12.4 Amps Racks Rollers hold one body tray in each of 2 bays. (Trays sold separately.) Gasket Vinyl Plumbing Drain or Condensate Evaporator Pan Required Crated Weight 600 lbs. (272.2 kg) For indoor laboratory or mortuary use where overcrowding, initial cost and installation restrictions are a major concern. Holds one standard body tray or a two-body litter. Eliminates the need for lifting because mortuary carts wheel into unit. Excellent for emergency preparedness. Roller-spring safety latch prevents any possible lock-ins. Door hinges on right. Unit ships disassembled. Especially useful for rooms where stationary models will not fit. Assembly is simple 6 panel fasteners and 16 bolts are all that is required. Necessary tools are supplied. No special electrical requirements are necessary. In instances where it is not possible to provide a drain, a condensate evaporation pan may be used. Mini Mort Order No Configuration Portable Capacity 2 Body Insulation Ozone Friendly 2" (5.1 cm) Foamed-In-Place Urethane Refrigerant Ozone Friendly R-404A Outside 40" x 84" x 60" Dimensions (101.6 x x cm) (W x D x H) Door Opening (1) 34" x 50" Dimensions (86.4 x 127 cm) (W x H) Power V/1Ph/60Hz Call for info on international voltage models Compressor V, 0.5 HP, 4, F Evap. Temp., 12.4 Amps Racks None Gasket Vinyl Plumbing Drain or Condensate Evaporator Pan Required Crated Weight 400 lbs. (181.4 kg) Autopsy / Mortuary Refrigeration Mobile Refrigeration

155 153 Architectural Specifications for Shandon Walk-In Refrigerators Refrigeration Autopsy / Mortuary Shandon walk-in refrigerators are designed and constructed to meet the customer's specification, no matter how large. This unit is made to accommodate approximately 400 bodies. Walk-In Refrigeration 1. General Walk-in coolers provided under this portion of the specifications are available in frameless or soft-nosed panel construction. The units are prefabricated of modular design and construction. They shall be designed to allow convenient and accurate field assembly and future enlargement by the addition of panels. 2. Panel Fabrication Standard wall, ceiling and floor panels shall be 11.5", 23", 34.5", and 46" (29.2, 58.4, 87.6, and cm) in width and shall be interchangeable with like panels. Custom panels are used to achieve the required overall cooler size. Frameless corner panels shall be 90 angles with actual 12" (30.5 cm) exterior horizontal measurements. Edges of frameless panels shall be foamed-in-place tongue and groove with camlock assemblies foamed-in-place at time of fabrication. Wall, ceiling, and floor reinforcement for supporting shelving or racking systems are available. Custom 3.5 (8.9 cm) wood-frame panels are available. Please specify on quote request. 3. Floor Construction (select one) a. With Floor: Panels shall be fabricated similar to other panels, designed to withstand uniformly distributed loads of 700 lbs. per square foot. If additional load capacity is needed, specify a reinforced floor. Reinforced floors are fabricated with a 0.6" (16 mm) underlayment of plywood. Floor may/may not be recessed. It may/may not be covered by tile and grout or concrete wearing floor. b. Floorless with screeds: Vinyl screeds shall form the base for wall sections. Screeds shall be designed to prevent thermal conduction and shall be coved on the interior and exterior for easy cleaning. 4. Insulation Insulation shall have a 97% closed cell structure and average in-place density of 2.2 lbs. per cubic foot. Overall thickness shall be 3.5" (8.9 cm) for framed panels and 4" (10.2 cm) for frameless panels. Fire hazard classification is according to ASTM E-84 and is certified with Underwriters Laboratories (UL) label. Custom 5.5" (14.0 cm) thick panels are also available.

156 Metal Finishes a. Standard finishes for walls, ceilings and floors are as follows: Exterior walls except front wall: 26 gauge stucco embossed galvalume. Front wall: 22 gauge, type 304 stainless steel with a #3 finish. Interior walls & ceiling: 26 gauge stucco embossed galvalume Interior floor: 0.1 (2.5 cm) smooth aluminum. b. Options for custom materials for exterior walls: (select one) stucco embossed aluminum 20 gauge stainless steel c. Options for custom materials for interior walls and ceilings: (select one) stucco embossed aluminum 20 gauge stainless steel d. Options for custom materials for interior floor: (select one) 18 gauge stainless steel 16 gauge stainless steel Note: Limited painted finishes are available. Call for details. 6. Panel Locking Assemblies Assembly of walk-ins shall be accomplished by camlocks which are activated by a hex wrench provided by the manufacturer. Access ports shall be on interior to allow assembly of walk-in from the inside and shall be covered by snap caps. 7. Panel Gaskets On frameless panels, vinyl gaskets are foamed-in-place on the interior and exterior edges of the tongue rails. On framed panels, closed cell foam gaskets are applied to the interior and exterior edges of the tongue rails. Gaskets are impervious to stains, greases, oil, and mildew. 8. Entrance Door and Door Frame Standard door is 36" width x 78" height (91.4 x cm). It is a swing out type door. When outside the unit and viewing the front face of the unit, the hinges are on the right hand side of the door. Swing in type doors, left side hinges, and sliding doors are available. Specify on quote request. Also, many optional size doors are available upon request. The door shall be flush type, finished in and out to match the wall in which it is located, and equipped with the following: a. Both sides and the top of door are equipped with a magnetic gasket to form an airtight seal. The bottom edge of the door is equipped with an adjustable sweep gasket. Door hinges are polished chrome, strap type with cam-lift hinges. Door latch is polished chrome with provisions for locking and a safety release to prevent entrapment of personnel within the box. b. Door jamb and door perimeter shall be made of fiberglass reinforced or ABS plastic. An isolated, low wattage heater wire covered by magnetically attracting stainless steel shall be fitted onto this jamb. This shall provide perfect sealing of magnetic gasket and prevent frost and condensation buildup. c. Each entrance door section shall be provided with an incandescent type vapor proof light, switch with pilot light and interconnecting wiring harness. Concealed wiring is standard on each entrance door section (see paragraph 13 for optional switches). d. When required, a threshold shall be provided with the door section. Heater wire shall continue beneath the threshold. e. A 2.5" (6.4 cm) dial thermometer shall be included with each door section to indicate inside temperature. f. Manual and electric sliding doors are also available instead of swing-type doors. 9. Vapor Proof Lights One pre-installed vapor proof light will be provided on the inside of each door section. Additional lights may be specified as options. Additional lights are shipped loose to be field installed. 10. Ramps (select one) a. Interior Ramp: To eliminate a step up into the walk-in for limited, light duty roll-in traffic, an interior ramp shall be supplied. Ramp shall have non-skid strips and not interfere with inside storage area. It shall have a heated threshold. Ramp will be as wide as finished door opening with a depth of 20" (custom depths available upon request). b. Exterior Ramp: For use with standard floor application and heavy usage roll-in traffic, an exterior ramp shall be supplied. It shall provide flush entrance, have non-skid strips and fasten to front of the walk-in floor. Ramp will be as wide as door and 36" (91.4 cm) deep (custom depths available upon request). 11. Installation Instructions A complete set of installation instructions shall be included with the walk-in. These instructions shall cover the erection and assembly of the walk-in and information on the refrigeration system. A floor plan print shall be included. 12. Agency Approvals All frameless walk-ins shall be fabricated to comply with National Sanitation Foundation (NSF) Standard No. 7. The NSF label shall be affixed to the interior door pan. Interior corners and floor shall be coved to meet NSF specifications. The panels are UL Listed with a fire hazard classification according to ASTM E-84. They are certified with UL label. Options 13. Switches a. 3-Way Switch: 3-way toggle switches with pilot lights are furnished as required to allow interior walk-in lights to be controlled from two entrances. b. Heavy Duty Cover: Optional heavy duty metal switch cover with lever handle is available. 14. Electronic Temperature Controller Digital readout, high / low audio / visual alarms, and contacts for remote alarm connection. 15. Viewing Window To provide vision into the walk-in room, a 14" x 14" (35.6 x 35.6 cm) triple pane window shall be used with a heated frame as standard. For freezer applications or humid conditions, heated frame and heated glass shall be used. Window is neatly trimmed and designed for replacement in the field. Windows measuring 14" x 24" (35.6 x 61.0 cm) are also available. 16. Audio/Visual Alarm Furnish, as required, digital alarm thermometer with LED display, a remote electronic sensor and dual adjustable alarm set points. There shall be an audible alarm and a flashing light when the walk-in temperature goes beyond acceptable operating limits. It shall have a reset button to silence the audible alarm. The alarm shall automatically revert to normal mode once temperature conditions are satisfied. Autopsy / Mortuary Refrigeration Walk-In Refrigeration

157 155 Autopsy / Mortuary Refrigeration Walk-In Refrigeration 17. Locking Bar Door shall be provided with a locking bar to prevent opening of the door even if hinges and latch are removed. Locking bars shall be provided with inside safety release. (Padlocks are by others.) 18. Kickplate Provide 16 gauge stainless steel or 0.125" (3.2 mm) aluminum diamond treadplate kickplate. Kickplate to be positioned on interior, exterior, or both interior and exterior of all entrance doors. Kickplate dimensions are to be 18", 24", 36" or 48" high (45.7, 61.0, 91.4, cm) by the width of the door. 19. Treadplate Flooring Aluminum diamond treadplate 0.125", ", or 0.25" (0.3, 0.5, 0.6 cm) thick (select one) shall be provided. All necessary fasteners, sealants and instructions to be provided. 20. Outdoor Door Package (required when door section is located outdoors) A heavy gauge door hood shall be provided to keep rain and/or snow out of door gasket. It is field installed and includes rain hood, heated air vent cover for freezer, and weatherproof light, switch and thermometer. 21. Additional Vapor-Proof Light Fixtures Provide, as required, additional ceiling mounted, vapor proof lights. One light, the light that is a standard feature on the wall next to the door, is factory installed. All other light fixtures are shipped loose to be field installed. 22. Fluorescent Lights Fluorescent light fixtures shall be provided as shown on drawing. Low temperature fixtures are available. 23. Wall Protectors a. Hat shaped bumper rail: 1" deep x 5" high (2.5 x 12.7 cm) shall be furnished where shown. It shall be fabricated of 16 gauge stainless steel or (0.3 cm) aluminum (select one). 24. Shelving and Racking Systems Shelving and racking systems information is available upon request from Thermo Electron Corporation, Anatomical Pathology. 25. Trim Strips Furnish trim strips between walk-in and building walls and ceiling where shown. Trim strips are constructed and finished of same material as exterior of walk-in. 26. Corner Guard Provide 16 gauge 6" x 6" (15.2 x 15.2 cm) stainless steel corner guards x 60" (152.4 cm) high on exposed exterior corner of walk-in. 27. Roof Caps For walk-ins installed outdoors, a rubber membrane roof cap shall be used to provide a moisture tight seal. On rooms up to 19 x 99 (548.6 x 3,017.5 cm), it is a one piece cap without seams to ensure there are no leaks. Required trim and fasteners will be furnished. 28. Refrigeration Equipment Thermo Electron Corporation, Anatomical Pathology will assist the customer in selecting the refrigeration system that best meets their needs. a. Condensing Unit: Unit shall be hermetic or semi-hermetic type (select one) factory assembled and UL listed or recognized. Condenser shall be air cooled or water cooled (select one). Components to be mounted on a heavy gauge steel base. b. Evaporator: Unit shall be sized to balance with the condensing unit. It shall be a copper tube, aluminum fin design. Fan motors and coil are to be housed in a heavy gauge aluminum enclosure. Evaporator will have drain pan with suitable drain pipe fitting. Cooler evaporators are to be air defrost. Freezer evaporators shall have an automatic electric defrost system including heaters, time clock, fan delay control and heated drain pan. Defrost shall be time initiated and temperature terminated with built-in fail safe controls. 29. Refrigeration Mounting Systems a. Ceiling Mounted: Self-contained system that is supplied completely wired, charged and tested. The system shall consist of a condensing unit assembly and an evaporator assembly with all necessary controls installed. Supplying electrical power to a junction box is all that is necessary in the field. b. Wall Mounted: Self contained system that is supplied completely wired, charged and tested. The system shall consist of a condensing unit assembly and an evaporator assembly with all necessary controls installed. Supplying electrical power to a junction box is all that is necessary in the field. c. Pre-Assembled Remote: Pre-assembled remote refrigeration system shall consist of a condensing unit assembly with controls mounted and leak tested, and an evaporator assembly with expansion valve and solenoid valve mounted and tested. On low temperature systems the time clock shall be shipped loose and is to be field located and wired. Refrigerant lines between the condensing unit assembly and evaporator assembly shall be field supplied and installed. The required type and amount of refrigerant to be field supplied. 30. Refrigeration Accessories a. Outdoor Package: Required for all air cooled condensing units installed in an area where the temperature falls below 50 F (10 C). The outdoor package includes a crankcase heater, a head pressure control and a weatherproof housing. b. Condensing Unit Rack: Racks shall be constructed of heavy gauge aluminum angle that is welded together. Racks are sized to accommodate condensing unit(s) specified.

158 Shandon Standard Walk-in Refrigerators (177.8 cm) (207 cm) 9 8 (294.6 cm) (265.4 cm) (440.7 cm) LMR-WI-1 LMR-WI-2 LMR-WI (294.6 cm) LMR-WI (265.4 cm) 11 7 (353.1 cm) (265.4 cm) 13 6 (411.5 cm) LMR-WI-6 Shandon LMR-WI Shandon LMR-WI Shandon LMR-WI Shandon LMR-WI Shandon LMR-WI Custom Units available upon request. Autopsy / Mortuary Refrigeration Walk-In Refrigeration

159 157 Necropsy Tables Shandon AN-59 Surgical Table / Hood Combination Shandon AN-59 Specifications Shandon AN-59, with disposal V, 60 Hz Shandon AN-59, with disposal V, 50/60 Hz Shandon AN-59, without disposal V, 60 Hz Shandon AN-59, without disposal V, 50/60 Hz Necropsy Tables Designed especially for small animal dissection and veterinary surgical procedures, the Shandon AN-59 features a semi-enclosed work area to aid in fume containment. Fumes are pulled backwards and upwards, away from the user. Unit is ready for connection to the building ventilation system. The work area is well lit by twin fluorescent tubes. Physical Specifications Dimensions (H x W x D) Unit: 58 x 60 x 25 (147.3 x x 63.5 cm) Sink: 9.75 x 14 x 12 (24.8 x 35.6 x 30.5 cm) Weight 300 lbs. (136.1 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for duplex receptacles. One circuit for lights and units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.50" (1.3 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and only (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s). Approx. pressure drop: Negligible; not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units) Shandon AN-59 Shandon AN-59 Features Fabrication Material Type 304 stainless steel with a #4 Finish. Factory Tested All plumbing and electrical work is completed at the factory and tested prior to shipment. Ventilation Unit has one (1) exhaust stub-out for connection to facility ventilation. Faucet Hot / cold water faucet is supplied with a swivel spout, built-in vacuum breaker and wrist-blade handles completely plumbed. Disposal A 1/2 HP disposal is provided as a standard part of Order No and No Plumbing All visible plumbing parts are brass with a heavy chrome-plating finish. Lighting The unit features double 48" (121.9 cm) fluorescent lights housed in a single fixture. Duplex Receptacle A hospital-grade duplex GFCI (ground fault current interrupter) receptacle is provided on V units. This feature interrupts the electrical supply when a ground fault occurs to protect the user against electrical shock. A hospital-grade duplex receptacle is provided on V units. While this receptacle does not protect against shock, it is ready for the customer to connect it to an RCD (residual current device) which does protect against shock. Acoustic Coating Applied to the underside to deaden sound and to prevent condensation, the coating is applied and then sealed with silver enamel paint. Welding All continuous welds are made with stainless steel filler medium. All visible welds are ground smooth and regrained to match the #4 finish.

160 Shandon DU-11 Downdraft Necropsy / Dissection Table Shandon DU-11 Specifications 158 This unit was designed as a multi-use laboratory workstation. Its compact dimensions (60", 152 cm, long) allow it to fit easily into your laboratory floor plan. It is excellent for gross dissection or the dissection of small animals. Unit includes three (3) removable grid plates. Shandon DU-11, with disposal V, 60 Hz Shandon DU-11, with disposal V, 50/60 Hz Shandon DU-11, without disposal V, 60 Hz Shandon DU-11, without disposal V, 50/60 Hz Shandon DU-11 Features Grid Plate Work Surface The grids are fabricated of 18-gauge, type 304 stainless steel with a #4 finish. Base Fabricated of 14-gauge, type 304 stainless steel with a #4 finish and 1.5 square tubing. 18-gauge type 304 stainless steel skirts are mounted on all four (4) sides of the base frame and are designed to provide knee space for user comfort. Downdraft Ventilation Integral downdraft ventilation assembly provides a passageway for fumes to be exhausted downward from the work surface through a vertical circular duct stub-out. Tabletop Fabricated of 14-gauge, type 304 stainless steel with a #4 finish and constructed with full 1 (2.54 cm) radius corners for easy cleaning and sanitation. All edges are flanged around the full perimeter along with a welded-in 14-gauge U -formed channel and angled cross supports providing maximum strength and durability. Acoustic Coating Applied to the underside to deaden sound and to prevent condensation, the coating is applied and then sealed with silver enamel paint. Welding All welds utilize only stainless steel as a filler medium. All visible welds shall be ground smooth and regrained to match the #4 finish. Physical Specifications Dimensions (H x W x D) Unit: 36 x 60 x 29.5 (91.4 x x 74.9 cm) Sink: 9.8 x 14 x 12 (24.8 x 35.6 x 30.5 cm) Weight 385 lbs. (174.6 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit each for duplex receptacle. One circuit for lights and units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.50" (1.3 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and only (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended 600 cfm (0.283 cu. m/s). Approx. pressure drop: 1.20 inches w.g. (2.99 mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units) Plumbing All external plumbing parts are brass with a heavy chrome plating finish. Vacuum Breaker Vacuum breakers protect the potable water supply. Sink A large single compartment sink is provided on the end of table. A leverhandle drain or a disposal is provided. Faucet Located at the end of the table, a hot/cold faucet is supplied with a swivel spout, built-in vacuum breaker and wrist-blade handles. Perimeter Rinse Continuous-flow rinse, complete with vacuum breaker and a flow-control valve mounted on the end of the tabletop, washes the plenum below the perforated work surface. Hand Spray The table comes with spray nozzle, on/off control and flexible spray hose. A valve is located on the end of the tabletop to control water pressure. Duplex Receptacle A hospital-grade duplex GFCI (ground fault current interrupter) receptacle is provided on V units. This feature interrupts the electrical supply when a ground fault occurs to protect the user against electrical shock. A hospital-grade duplex receptacle is provided on V units. This receptacle does not protect against shock, however, it is ready for the customer to connect it to an RCD (residual current device) which does protect against shock. Necropsy Tables Shandon DU-11

161 159 Necropsy Shandon LM-8 Downdraft Autopsy / Necropsy Table The Shandon LM-8 model is an efficient, compact autopsy / necropsy table (only 60", cm, long) that offers the fine features of the larger models, but provides savings in floor space as well as cost. It is most often used in research facilities and areas where a small, but heavy-duty, table is required; includes three (3) removable grid plates. An optional configuration with slats is also available. Shandon LM-8, with disposal V, 60 Hz Shandon LM-8, with disposal V, 50/60 Hz Shandon LM-8, without disposal V, 60 Hz Shandon LM-8, without disposal V, 50/60 Hz Shandon LM-8 Specifications Physical Specifications Dimensions (H x W x D) Unit: 36 x 60 x 29.5 (91.4 x x 74.9 cm) Sink: 9.75 x 14 x 12 (24.8 x 35.6 x 30.5 cm) Weight 375 lbs. (170.1 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit each for duplex receptacle. One circuit for units with disposal. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer. Disposal 1/2 HP included on models and (use is prohibited in some areas; consult building codes prior to ordering a disposal) Ventilation Recommended cfm ( cu. m/s) for unit. Approx. pressure drop: inches w.g ( mb) not including losses due to customer ductwork. Agency Approvals UL / cul ( V units) and CE ( V units) Tables Shandon LM-8 Shandon LM-8 Features Grid Plate Work Surface The grids are fabricated of 18-gauge, type 304 stainless steel with a #4 finish. Each grid plate has two 11-gauge stainless steel stand-offs to provide fluid drainage. Pedestal Fabricated of 14-gauge, type 304 stainless steel with a #4 finish. The pedestal acts as an air plenum for the downdraft. The pedestal is also flanged on the interior with four (4) inch (1.6 cm) diameter holes for mounting to facility floor. Downdraft Ventilation Integral downdraft ventilation assembly provides a passageway for fumes to be exhausted downward from the work surface through the pedestal of the table. See page 122 for details. Tabletop Fabricated of 14-gauge, type 304 stainless steel with a #4 finish and constructed with full 1 (2.54 cm) radius corners for easy cleaning and sanitation. All edges are flanged around the full perimeter along with a welded-in 14-gauge U -formed channel and angled cross supports providing maximum strength and durability. Acoustic Coating Applied to the underside to deaden sound and to prevent condensation, the coating is applied and then sealed with silver enamel paint. Welding All welds utilize only stainless steel as a filler medium. All visible welds shall be ground smooth and regrained to match the #4 finish. Plumbing All external plumbing parts are brass with a heavy chrome plating finish. Vacuum Breaker Vacuum breakers protect the potable water supply. Sink A large single compartment sink is provided on the end of table. A leverhandle drain or disposal is provided. Faucet Located at the end of the table, a hot/cold faucet is supplied with a swivel spout, built-in vacuum breaker and wrist-blade handles. Hydro-aspirator Deluxe hydro-aspirator with reverse flow is supplied. It is complete with control valve, vacuum breaker, air gap and plastic tubing. Built-in Table Rinse Built-in, continuous-flow table rinse with ten (10) spray nozzles, complete with vacuum breaker and flow control valve. Hand Spray All tables come with spray nozzles, on/off control and flexible spray hose. A valve is located on the table base to control water pressure. Duplex Receptacle A hospital-grade duplex GFCI (ground fault current interrupter) receptacle is provided on V units. This feature interrupts the electrical supply when a ground fault occurs to protect the user against electrical shock. A hospital-grade duplex receptacle is provided on V units. This receptacle does not protect against shock, however, it is ready for the customer to connect it to an RCD (residual current device) which does protect against shock. Optional Design Features 1. Three (3) 5-inch slats (No ) and one (1) 7-inch slat (No ) are available. 2. No. 820 Scale Support Bracket for No Post-mortem Scale or No Digital Post-mortem Scale. 3. Centimeter and/or inch/foot markings engraved on the edge of the tabletop. No centimeter; No inch/foot.

162 Downdraft Necropsy Table 160 This Downdraft Necropsy Table is designed to provide a ventilated workstation for animal necropsies, surgeries, perfusions, and dissections. The table functions to pull fumes down and away from the user s face when connected to a negative air source, providing a healthier, safer work environment. Double pedestal design allows the user to sit or stand during procedures. Exhaust is located at the top of the unit for connection to facility exhaust system. Manually adjustable damper regulates airflow and downdraft velocity. Type 316 stainless steel construction. Includes five (5) stainless steel perforated work surface panels. Sloped drain pan prevents debris build-up. Vacuum-breaker, control valve, and two (2) flush down manifolds below the work surface wash away debris and make cleaning easy. Includes a large, removable stainless steel sink with large radius corners, hot / cold water faucet, and spray gun assembly with 8 (243.8 cm) of hose. Downdraft Necropsy Table Specifications Downdraft Necropsy Table V, 60 Hz B Downdraft Necropsy Table V, 50/60 Hz B Physical Specifications Dimensions (H x W x D) 37 x 84 x 30 (94 x x 76.2 cm) Weight 500 lbs. (226.8 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.50" (1.3 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 2" (5.1 cm) copper waste line. If drain trap is required, must be installed by customer. Ventilation Call for details. Available Accessories SGN Caisson filter housing with bagging type HEPA filter 95% DOP, pleated prefilter and charcoal filter; stainless steel SGN Caisson filter housing with bagging type HEPA filter 99.9% DOP, pleated prefilter and charcoal filter; stainless steel Manual or electric push-button height adjustability Thermoplastic cutting board, 0.5" x 12" x 18" (1.27 x 30.5 x 45.7 cm) 10" (25.4 cm) I.D. Type S stainless steel flexible duct, 10 (304.8 cm) section Ground-fault current interrupter (GFCI) receptacle 1 HP heavy-duty disposal Hydro-Aspirator system Eye wash hose/spray assembly Hand spray assembly with recoil hose Vacuum connection fitting Air connection fitting Gas connection fitting Distilled water connection fitting Formalin dispensing fitting with 3/8" (1.0 cm) I.D. barbed nozzle Detachable side shelf Detachable, sliding instrument tray Adjustable arm, swivel-type surgical light Motorized, adjustable damper in lieu of manual damper Computer data ports Work surface dividers Agency Approvals Will be available as an option. Necropsy Tables Downdraft Necropsy Table

163 161 Elevating Downdraft Necropsy Table The Elevating Downdraft Necropsy Table is designed to provide a ventilated workstation for animal necropsies, surgeries, perfusions, and dissections. The table functions to pull fumes down and away from the user s face when connected to a negative air source, providing a healthier, safer work environment. Necropsy Tables Elevating Downdraft Necropsy Table Double pedestal design allows the user to sit or stand during procedures. Exhaust is located at the top for connection to facility exhaust system. Manually adjustable damper regulates airflow and downdraft velocity. Type 316 stainless steel construction. Includes three (3) stainless steel perforated work surface panels. Sloped drain pan prevents debris build-up. Vacuum-breaker, control valve, and two (2) flush down manifolds below the work surface wash away debris and make cleaning easy. Includes two (2) large, removable stainless steel sinks with large radius corners, hot / cold water faucets, and spray gun assembly with 8 (243.8 cm) of hose. Integral electrically operated hydraulic lift system enables users to adjust the table surface height from 30" to 38" (76.2 to 96.5 cm) above the finished floor. Push-button rocker switch is located on the side of the table to control the height adjustment. Accordion-style flexible duct connector is provided for connection to facility ductwork. Internal plumbing and wiring connections are equipped with flexible connections to accommodate the adjustable-height system. Elevating Downdraft Necropsy Table Specifications Elevating Downdraft V, 60 Hz B Necropsy Table Elevating Downdraft V, 50/60 Hz B Necropsy Table Physical Specifications Dimensions (H x W x D) x 84 x 30 ( x x 76.2 cm) Weight 650 lbs. (294.8 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.50" (1.3 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 2" (5.1 cm) copper waste line. If drain trap is required, must be installed by customer. Ventilation Call for details. Available Accessories SGN Caisson filter housing with bagging type HEPA filter 95% DOP, pleated prefilter and charcoal filter; stainless steel SGN Caisson filter housing with bagging type HEPA filter 99.9% DOP, pleated prefilter and charcoal filter; stainless steel Manual height adjustability Thermoplastic cutting board, 0.5" x 12" x 18" (1.27 x 30.5 x 45.7 cm) 10" (25.4 cm) I.D. Type S stainless steel flexible duct, 10 (304.8 cm) section Ground-fault current interrupter (GFCI) receptacle 1 HP heavy-duty disposal Hydro-Aspirator system Eye wash hose/spray assembly Hand spray assembly with recoil hose Vacuum connection fitting Air connection fitting Gas connection fitting Distilled water connection fitting Formalin dispensing fitting with 3/8" (1.0 cm) I.D. barbed nozzle Detachable side shelf Detachable, sliding instrument tray Adjustable arm, swivel-type surgical light Motorized, adjustable damper in lieu of manual damper Computer data ports Work surface dividers Agency Approvals Will be available as an option.

164 Downdraft Necropsy Table with Drawers Double pedestal design allows the user to sit or stand during procedures. Exhaust is located at the top of the unit for connection to facility exhaust system. Manually adjustable damper regulates airflow and downdraft velocity. Type 316 stainless steel construction. Includes four (4) stainless steel perforated work surface panels. Sloped drain pan prevents debris build-up. Vacuum-breaker, control valve, and two (2) flush down manifolds below the work surface wash away debris and make cleaning easy. Includes a large, removable stainless steel sink with large radius corners, hot / cold water faucet, and spray gun assembly with 8 (243.7 cm) of hose. Non-exhaust end pedestal has a base cabinet design with three (3) stainless steel drawers per side. The Downdraft Necropsy Table with Drawers is designed to provide a ventilated workstation for animal necropsies, surgeries, perfusions, and dissections. The table functions to pull fumes down and away from the user s face when connected to a negative air source, providing a healthier, safer work environment. The nonexhaust end pedestal includes spacious storage drawers for instrument and tool storage. Downdraft Necropsy Table with Drawers Specifications Downdraft Necropsy V, 60 Hz B Table with Drawers Downdraft Necropsy V, 50/60 Hz B Table with Drawers Physical Specifications Dimensions (H x W x D) 37 x 78 x 36 (94 x x 91.4 cm) Weight 525 lbs. (238.1 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Plumbing Supply Requirements (by customer) Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 2" (5.1 cm) copper waste line. If drain trap is required, must be installed by customer. Ventilation Call for details. Available Accessories Detachable side shelf Detachable sliding instrument tray Adjustable arm swivel type surgical light Motorized adjustable damper in lieu of manual damper Computer data ports Work surface dividers Hanging dial type (or digital) scale Thermoplastic cutting board, 0.5" x 12" x 18" (1.27 x 30.5 x 45.7 cm) 10" (25.4 cm) I.D. Type S stainless steel flexible duct, 10 (304.8 cm) section Ground fault current interrupter (GFCI) receptacle 1 HP heavy duty disposal Hydro-Aspirator system Eye wash hose/spray assembly Hand spray assembly with recoil hose Vacuum connection fitting Air connection fitting Gas connection fitting Distilled water connection fitting Formalin dispensing system Agency Approvals Will be available as an option. 162 Necropsy Tables Downdraft Workstation with Drawers

165 163 Downdraft Anatomy Dissecting Table The Downdraft Anatomy Dissecting Table is designed to provide a ventilated workstation for animal necropsies, surgeries, perfusions, and dissections. The table functions to pull fumes down and away from the user s face when connected to a negative air source, providing a healthier, safer work environment. Two (2) hinged covers totally enclose the work area and the cadaver. Necropsy Downdraft Anatomy Dissecting Table Specifications Downdraft Anatomy Dissecting Table V, 60 Hz B Downdraft Anatomy Dissecting Table V, 50/60 Hz B Tables Downdraft Anatomy Dissecting Table The table draws room air equally from both sides via slots on the interior side of the table perimeter rail, enhancing the direction and control of captured air and fumes. An adjustable volume damper control is located at the end of the table for easy access and control of the airflow volume across the work area. An atmospheric damper is included on the table to provide continuous airflow volume when the table covers are closed, allowing for continuous balance of air on the facility HVAC system. Type 316 stainless steel construction. Pitched table pan allows drainage and collection of waste. Table has two (2) panels, one located at each end of the pan, completely welded in place to direct and balance the exhausting of air within the system. A sliding viewing port is located on each side of the table to allow observation / maintenance of the table drain trough below the body tray so that the tray / specimen does not need to be removed. Hinged cover includes two (2) positive locks per side to lock the hood in the down position. See Shandon Stainers on pages Physical Specifications Dimensions (H x W x D) 36 x 86 x 32 (91.4 x x 81.3 cm) Weight 350 lbs. (158.8 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Plumbing Supply Requirements (by customer) Waste: Provide one (1) standard 2" (5.1 cm) copper waste line. If drain trap is required, must be installed by customer. Ventilation Call for details. Available Accessories Stainless steel book stand Stainless steel drain bucket Agency Approvals Will be available as an option. Each hinged cover includes two (2) grab handles that swivel in place to provide ease in lowering and raising the hood. A removable 20" x 82" (50.8 x cm) body / specimen tray is included. Tray is pitched to a drain hole and is easily removable for cleaning underneath the tray. Each corner of the table includes a 3/8" (1.0 cm) I.D. socket for placement of an optional book stand. An optional stainless steel drain bucket and an optional removable stainless steel book stand are available.

166 Shandon AN-63 Large Animal Necropsy Table with Scissor Lift Shandon AN-63 Specifications 164 Shandon AN V, 60 Hz Shandon AN V, 50/60 Hz Stainless steel, kidney-shaped table can carry a centralized load of 5,000 lbs. (2,268 kg) or an offset load of 2,000 lbs. (907.2 kg). Tabletop is fabricated from two 11-gauge stainless steel plates with large corner radii. S-beams support the tabletop. S-beams conform to ASTM A36 Standards. Drain slot (52", cm) runs along the back edge of the table (the side opposite the U-shaped cut-out.) Accordion style bellows is made from neoprene nylon with a PVC stiffener surrounds scissor lift for complete washdown capabilities and is attached with velcro for quick disconnect. Maximum table height is 37" (94 cm). Minimum height is 16" (40.6 cm). Lift specifications: electrically powered, floor-mounted, hydraulic, scissor-type lift. 6,000 lbs. (2,721.6 kg) capacity. Physical Specifications Dimensions (H x W x D) x 108 x 66 ( x x cm) Weight 1,200 lbs. (544.3 kg) Power Requirements V, 60 Hz and V, 50/60 Hz units available Power Supply Requirements (by customer) One circuit for scissor lift. Liquid-tight junction box and conduit connectors. Plumbing Supply Requirements (by customer) None. Hydraulic Lift 1 HP scissor-type lift. Agency Approvals Will be available as an option. Necropsy Tables Shandon AN-63

167 165 Shandon Dissecting Instruments Dissection Many popular instruments offered in both premium and economy grades. Properly hardened and tempered, and then passivated. Electronically polished and cleaned for a high quality finish. Premium grade instruments finely crafted in Germany. Straight Metzenbaum Scissors Patterns, dimensions and finish are held to exacting standards, producing the finest instruments available. Standard grade instruments are excellent for costconscious applications. Guaranteed to be free from defects in material and workmanship Curved Mayo Dissecting Scissors Dissecting Instruments Scissors Style Size Straight, Premium 5.5" (14.0 cm) Straight, Standard 5.5" (14.0 cm) 9201 Straight, Standard 7" (17.8 cm) 9202 Curved Metzenbaum Scissors Style Size Curved, Premium 5.5" (14.0 cm) Curved, Standard 7" (17.8 cm) 9212 Straight Mayo Dissecting Scissors Style Size Straight, Premium 5.5" (14.0 cm) Straight, Premium 6.75" (17.1 cm) Straight, Premium 9" (22.9 cm) Straight, Standard 5.5" (14.0 cm) 8681 Straight, Standard 6.75" (17.1 cm) 8682 Straight, Standard 9" (22.9 cm) 8683 Style Size Curved, Premium 6.75" (17.1 cm) Curved, Premium 9" (22.9 cm) Curved, Standard 5.5" (14.0 cm) 8701 Curved, Standard 6.75" (17.1cm) 8702 Curved, Standard 9" (22.9 cm) 8703 Doyen s Straight Abdominal Scissors Style Size Straight, Premium 7 (17.8 cm) Straight, Standard 7" (17.8 cm) 1900 Doyen s Curved Abdominal Scissors Style Size Curved, Premium 7" (17.8 cm) Curved, Standard 7" (17.8 cm) 1903

168 Dissecting Scissors, Curved Sharp/Sharp Dissecting Scissors, Straight Blunt/Sharp 166 Style Size Curved, Sharp/Sharp, Premium 4.5" (11.4 cm) Curved, Sharp/Sharp, Premium 6.5" (16.5 cm) Curved, Sharp/Sharp, Standard 4.5" (11.4 cm) Curved, Sharp/Sharp, Standard 5.5" (14.0 cm) Dissecting Scissors, Straight Sharp/Sharp Style Size Straight, Sharp/Sharp, Premium 4.5" (11.4 cm) Straight, Sharp/Sharp, Premium 5.5" (14.0 cm) Straight, Sharp/Sharp, Premium 6.5" (16.5 cm) Straight, Sharp/Sharp, Standard 4.5" (11.4 cm) Straight, Sharp/Sharp, Standard 5.5" (14.0 cm) Straight, Sharp/Sharp, Standard 6.5" (16.5 cm) Dissecting Scissors, Curved Blunt/Sharp Style Size Curved, Blunt/Sharp, Premium 6.5" (16.5 cm) Curved, Blunt/Sharp, Standard 6.5" (16.5 cm) Artery Scissors Style Size Straight, Blunt/Sharp, Premium 4.5" (11.4 cm) Straight, Blunt/Sharp, Premium 5.5" (14.0 cm) Straight, Blunt/Sharp, Premium 6.5" (16.5 cm) Straight, Blunt/Sharp, Standard 4.5" (11.4 cm) Straight, Blunt/Sharp, Standard 5.5" (14.0 cm) Straight, Blunt/Sharp, Standard 6.5" (16.5 cm) Dissecting Scissors, Straight Blunt/Blunt Style Size Straight, Blunt/Blunt, Premium 4.5" (11.4 cm) Straight, Blunt/Blunt, Premium 5.5" (14.0 cm) Straight, Blunt/Blunt, Premium 6.5" (16.5 cm) Straight, Blunt/Blunt, Standard 4.5" (11.4 cm) Straight, Blunt/Blunt, Standard 5.5" (14.0 cm) Straight, Blunt/Blunt, Standard 6.5" (16.5 cm) Dissecting Scissors, Fine Point Style Size Fine Points, Angular, Premium 4.5" (11.4 cm) Fine Points, Angular, Standard 4.5" (11.4 cm) Eye Scissors Dissection Dissecting Instruments Scissors Style Size Straight, Sharp/Sharp, Standard 4.5" (11.4 cm) Style Size Probe Both Blades, Angled, Premium 4.5" (11.4 cm)

169 167 Iris Scissors, Straight Harrington Scissors, Curved Dissection Style Size Straight, Premium 4.5" (11.4 cm) Straight, Standard 4.5" (11.4 cm) Iris Scissors, Curved Style Size Curved, Satin Finish, Premium 11.5" (29.2 cm) Harrington Scissors, Straight Dissecting Instruments Style Size Curved, Premium 4.5" (11.4 cm) Curved, Standard 4.5" (11.4 cm) Iris Scissors, Probe / Point, Angular Style Size Probe / Point, Angular, Premium 4.5" (11.4 cm) Probe / Point, Angular, Standard 4.5" (11.4 cm) 1906 Dubois Scissors, Heavy Pattern Style Size Straight, Satin Finish, Premium 11.5" (29.2 cm) Enterotomy Scissors, No Hook Style Size No Hook, Premium 8" (20.3 cm) No Hook, Standard 8" (20.3 cm) 901 Enterotomy Scissors, Hook Blade Style Size Heavy Pattern, Standard 10.5" (26.7 cm) 1907 Style Size Hook Blade, Premium 8" (20.3 cm) Hook Blade, Standard 8" (20.3 cm) 1902 Lister Bandage Scissors Scissors See Shandon Dissecting Instruments with Case on page 179. Style Size Angled, Standard 7.25" (18.4 cm)

170 Plain Bone Shears Round Tip Bone Saw 168 Style Size Screw Pivot, 1 Spring, Standard 9" (22.9 cm) Style Size Blade: 8" x 2.5" (20.3 x 6.4 cm), Standard 11.5" (29.2 cm) Liston Bone Shears Style Size Screw Pivot, Standard 7.5" (19.1 cm) 500 Screw Pivot, Standard 10" (25.4 cm) 501 Rib Shears Style Size Curved, Locked, Separates at Pivot 9" (22.9 cm) (Eccentric), 1 Spring, Std. Curved, Screw Pivot, 1 Spring, Standard 9" (22.9 cm) 502 Constable Rib Shears Style Size Curved, Screw Pivot, 2 Spring, 9.5" (24.0 cm) Blade Lock, Std. Gluck Rib Shears Style Size Curved, Separates at Pivot 8.5" (21.6 cm) (Eccentric), Standard Saterlee Bone Saw Style Size Blade: 8" x 2.25" (20.3 x 5.8 cm), Standard 12" (30.5 cm) 400 Rachiotomy Bone Saw Style Size Blade: 5.75" x 2" (14.6 x 5.0 cm), Standard 9.5" (24.1 cm) 401 Brun s Metacarpal Saw Style Size Blade: 2.75" x 0.5" (7.0 x 1.2 cm), Standard 7.5" (19.0 cm) 2308 Dissection Dissecting Instruments Shears / Saws

171 169 Halstead s Hemostatic Mosquito Forceps, Straight Dura Strip Forceps Dissection Style Size Straight, Premium 5" (12.7 cm) 7507 Straight, Standard 5" (12.7 cm) 507 Halstead s Hemostatic Mosquito Forceps, Curved Style Size Serrated, Heavy-Duty, Standard 8.5" (21.6 cm) 1908 Rochester-Oschner Hemostatic Forceps, Straight Style Size Straight, 1 x 2 Teeth, Premium 6.25" (15.9 cm) Dissecting Instruments Style Size Curved, Standard 5" (12.7 cm) 508 Kelly s Hemostatic Forceps Style Size Straight, Standard 5.5" (14.0 cm) 511 Tube Occluding Clamp Hemostatic Forceps Rochester-Oschner Hemostatic Forceps, Curved Style Size Curved, 1 x 2 Teeth, Premium 9" (22.9 cm) Rochester-Pean s Hemostatic Forceps Forceps Style Size Straight, Smooth Jaws, Std. 4.5" (11.4 cm) Straight, Smooth Jaws, Std. 7" (17.8 cm) Style Size Straight, Premium 6.25" (15.9 cm) Adson Thumb Forceps, Straight See Shandon Biopsy Bags on page 13. Style Size 1x2 Teeth, Straight, Standard 4.75" (12.1 cm) 627

172 Adson Thumb Forceps, Fine Serrated Cartilage Thumb Forceps, Curved 170 Style Size Fine Serrated Tip, Straight, Premium 4.75" (12.1 cm) 7626 Fine Serrated Tip, Straight, Standard 4.75" (12.1 cm) 626 Brown-Adson Thumb Forceps Style Size 7x7 Teeth, Straight, Standard 4.75" (12.1 cm) Jansen Bayonet Thumb Forceps Style Size Serrated, Standard 6.25" (15.9 cm) Cartilage Thumb Forceps, Straight Style Size Straight, Standard 5" (12.7 cm) 163 Style Size Curved, Fine Point, Standard 5" (12.7 cm) 1631 Cilia Thumb Forceps Style Size Flat, Angled, Premium 3.75" (9.5 cm) Potts-Smith Dressing Thumb Forceps Style Size Fine Tips, Serrated, Premium 7" (17.8 cm) Microdissecting Thumb Forceps, Extra Fine Tips Style Size Extra Fine Tips, Curved, 4.5" (11.4 cm) Non-magnetic Stainless Steel, Premium Dissection Dissecting Instruments Forceps

173 171 Microdissecting Thumb Forceps, Fine Tips Thumb Forceps with Magnifier Dissection Style Size Fine Tips, 5" (12.7 cm) Non-magnetic Stainless Steel, Premium Novy Coverglass Thumb Forceps Style Size For Microdissecting, Includes Case 3" (7.6 cm) Russian Thumb Forceps Style Size Flat, Square/Pointed, 4.5" (11.4 cm) 1912 Curved Tips, Standard Style Size Circular Serrated Tips, Premium 6" (15.2 cm) Circular Serrated Tips, Premium 8" (20.3 cm) Circular Serrated Tips, Standard 6" (15.2 cm) 6551 Circular Serrated Tips, Standard 8" (20.3 cm) 6552 Circular Serrated Tips, Standard 10" (25.4 cm) 6553 Dissecting Instruments Forceps Kuehne Coverglass Thumb Forceps Style Size Flat-end Tips, Standard 4" (10.2 cm) Coverglass Thumb Forceps Style Size Square-end Tips, Standard 4.75" (12.1 cm) Broad Point Dressing Thumb Forceps Style Size Fine Serrated Tip, Premium 4.5" (11.4 cm) Fine Serrated Tip, Premium 5" (12.7 cm) Fine Serrated Tip, Premium 5.5" (14.0 cm) Fine Serrated Tip, Premium 6" (15.2 cm) Fine Serrated Tip, Premium 8" (20.3 cm) Fine Serrated Tip, Premium 10" (25.4 cm) Fine Serrated Tip, Standard 4.5" (11.4 cm) 6301 Fine Serrated Tip, Standard 5" (12.7 cm) 6302 Fine Serrated Tip, Standard 5.5" (14.0 cm) 6303 Fine Serrated Tip, Standard 6" (15.2 cm) 6304 Fine Serrated Tip, Standard 8" (20.3 cm) 6305 Fine Serrated Tip, Standard 10" (25.4 cm) 6306 Fine Serrated Tip, Standard 12" (30.5 cm) 6307 See Shandon Grosslab Senior Pathology Workstations on pages

174 Tissue Thumb Forceps, 1 x 2 Teeth Tissue Thumb Forceps, 4 x 5 Teeth 172 Style Size 1x2 Teeth, Premium 6" (15.2 cm) x2 Teeth, Standard 5.5" (14.0 cm) x2 Teeth, Standard 6" (15.2 cm) x2 Teeth, Standard 8" (20.3 cm) x2 Teeth, Standard 10" (25.4 cm) 6456 Tissue Thumb Forceps, 2 x 3 Teeth Style Size 2x3 Teeth, Premium 6" (15.2 cm) x3 Teeth, Standard 5" (12.7 cm) x3 Teeth, Standard 5.5" (14.0 cm) x3 Teeth, Standard 6" (15.2 cm) x3 Teeth, Standard 8" (20.3 cm) x3 Teeth, Standard 10" (25.4 cm) 6605 Tissue Thumb Forceps, 3 x 4 Teeth Style Size 3x4 Teeth, Premium 5.5" (14.0 cm) x4 Teeth, Premium 6" (15.2 cm) x4 Teeth, Premium 8.25" (21.0 cm) x4 Teeth, Standard 8" (20.3 cm) 6654 Style Size 4x5 Teeth, Premium 5" (12.7 cm) x5 Teeth, Premium 5.5" (14.0 cm) x5 Teeth, Premium 6" (15.2 cm) x5 Teeth, Standard 5" (12.7 cm) x5 Teeth, Standard 5.5" (14.0 cm) x5 Teeth, Standard 6" (15.2 cm) x5 Teeth, Standard 8" (20.3 cm) x5 Teeth, Standard 10" (25.4 cm) x5 Teeth, Standard 12" (30.5 cm) 6706 Littauer-Liston Bone Cutting Forceps Style Size Box Pivot, 2 Spring, Premium 6" (15.2 cm) Liston Bone Cutting Forceps Style Size Box Pivot, 1 Spring, Standard 6" (15.2 cm) Post-Mortem Hammer with Hook Style Size Face: 0.75" x 0.75" (2.0 x 2.0 cm), Standard 8" (20.3 cm) 510 Dissection Dissecting Instruments Forceps

175 173 Hammer Costotome Style Size Face: 1" Diameter (2.5 cm), Standard 9.5" (24.1 cm) 525 Style Size Edge: 0.75" (1.9 cm), Standard 8.5" (21.6 cm) 606 Dissection Lead-Filled Mallet Rachiotome Style Size Face: 1.33" Diameter (35mm), Standard 9.5" (24.5 cm) 526 Bone Chisel Style Size Edge: 1.5" (3.8 cm), Standard 6.75" (17.2 cm) 604 Virchow Skull Breaker Dissecting Instruments Style Size One Bevel, Edge: 0.5" (1.3 cm), Standard 6.5" (16.5 cm) 6002 One Bevel, Edge: 0.75" (1.9 cm), Standard 6.5" (16.5 cm) 6003 Brunetti s Chisel Style Size Edge: 0.625" (1.5 cm), 3.5" (9.0 cm) 607 Handle: 4" (10.0 cm), Standard Osteotome Style Size Left, Edge: 1.125" (3.0 cm) 11.25" (28.5 cm) Councilman s Chisel Style Size Dual Bevel, Edge: 0.5" (1.3 cm), Standard 6.5" (16.5 cm) 6012 Lambotte s Osteotome Hammers / Chisels Style Size Blade: 2" x 2.25" (5.1 x 5.7 cm), Standard 7" (17.8 cm) 605 Style Size Edge: 1" (2.5 cm), Standard 8" (20.3 cm) 6022

176 Standard Dissecting Knife Dublin Brain Knife 174 Style Size Blade: 5.75" x 0.75" 10.25" (26.0 cm) 753 (15.0 x 2.0 cm) Standard Blade: 7.5" x 0.75" 12.75" (32.4 cm) 752 (20.0 x 2.0 cm) Standard Blade: 9.75" x 0.75" 14.25" (36.2 cm) 751 (25.0 x 2.0 cm) Standard Standard Dissecting Knife Set Style One each of No. 751, No. 752, No Dissecting Knife, Premium Center Point Blade Style Size Center Point, Blade: 6.125" x 0.75" 12" (30.5 cm) 7753 (15.0 x 2.0 cm) Premium Center Point, Blade: 8" x 0.75" 13.25" (33.7cm) 7752 (20.0 x 2.0 cm) Premium Center Point, Blade: 9.75" x 0.75" 15.25" (38.7 cm) 7751 (25.0 x 2.0 cm) Premium Premium Dissecting Knife Set Style One of each of No. 7751, No and No Large Dissecting Knife Style Size Single Edge, Blade: 14" x 1.5" 19.0" (48.3 cm) 728 (35.6 x 3.8 cm) Std. Virchow Brain Knife Style Size Double Edge, Blade: 7 x 0.75 Overall length: (18.0 x 2.0 cm) Premium 12" (30.5 cm) Double Edge, Blade: 8.5" x 1.19" Overall length: (21.6 x 3.0 cm) Premium 13.5" (34.3 cm) Brain Knife Style Size Double Edge, Blade: 10" x 0.625" Overall length: 7142 (25.0 x 4.0 cm) Standard 14.5" (36.8 cm) Double Edge, Blade: 7" x 1" Overall length: 7141 (18.0 x 2.5 cm) Standard 12" (30.5 cm) Post-Mortem Knife Style Size Blade: 4.5" x 0.9" 9.25" (23.5 cm) 723 (11.6 x 2.2 cm) Standard Dissection Dissecting Instruments Knives Style Size Blade: 18" x 1.5" (45.7 x 3.8 cm) Standard 24.25" (61.6 cm) 715

177 175 Post Mortem Knife Spinal Cord Extractor Style Size Blade: 9" x 0.9" (22.9 x 2.2 cm) Standard 13.25" (33.7 cm) 721 Shandon Spinal Cord Extractor 610 Dissection Specimen Knife 45 Caliber Bullet Probe Style Size Blade: 8" x 1.5" (20.3 x 3.8 cm) Standard 13" (33.0 cm) 716 Specimen Knife with Ruler Style Size 45 Caliber 18 (45.7 cm) B Caliber Bullet Probe Dissecting Instruments Style Size Ratcliffe Pattern, Blade: 8" x 1.5" 13" (33.0 cm) 717 (20.3 x 3.8 cm) Std. Multi-Blade Lab Knife and Blades Style Size 38 Caliber 18 (45.7 cm) B Caliber Bullet Probe Style Size Includes 12 Blades And 12 Spacers 5.5" (14.0 cm) 530 Blades For Lab Knife No / Pk. 3.75" (9.5 cm) 531 Lab Utility Knife and Blades Style Size 22 Caliber 18 (45.7 cm) B Flexible Probe with Eyelet Knives / Probes Style Size Includes Handle and 5 Blades (No. 528) 5.75" (14.6 cm) 527 Durham Duplex Blades, 2.5" (6.4 cm) 528 For Handle No. 609 and No / Pk. Size 6" (15.2 cm) 1101

178 Shandon Heavy-Duty Scalpel Plastic Scalpel Blade Handle 176 Style Size Belly Blade: 2" x 0.5" 7" (18.0 cm) 745 (5.0 x 1.3 cm) Standard Style Size Red Plastic, #6, Autoclavable 5.25" (13.3 cm) (Holds No Blades) Stainless Steel Scalpel Blade Handle Style Size Stainless Steel, #4L 8.5" (21.6 cm) 5334 (Holds No Blades) Nickel Plated Scalpel Blade Handle Style Size Rustless Nickel-Plated Steel, #4, 6.25" (15.9 cm) (Holds No Blades) Plated Scalpel Blade Handle Style Size Plated, #4, (Holds #20-25 Blades) 5.5" (14.0 cm) 5324 Blade Removal Instrument Style Stainless Steel Handle and Blades Style Size Handle for Blade 5" (12.7 cm) 412 No. 413, No. 415 or No. 417, 2-Jaw Chuck Blades for Handle No / Pk. 1.75" (4.6 cm) 413 Blades for Handle No / Pk. 2.25" (5.7 cm) 415 Blade for Razor Saw, 4.5" (11.4 cm) 417 Use With Handle No. 412 Nylon Brush Style Size With Plastic Handle - 3 / Pk. 7.25" (18.4 cm) Stainless Steel Brush Style Size With Plastic Handle - 3 / Pk. 7.25" (18.4 cm) Dissection Dissecting Instruments Scalpels / Blades / Brushes

179 177 Scalpel Blade Handle, No. 5 Scapel Blade No. 22 Style Size Green Plastic, Autoclavable 5" (12.7 cm) (Holds No Blades) Dissection Disposable Scalpel, No. 10 Style Size Sterile, Individually Wrapped, 10 - Pk (14.6 cm) Scapel Blade No. 11 Style Size Sterile / Pk. 2.25" (5.7 cm) Scapel Blade No. 23 Style Size Sterile / Pk. 1.6 (4 cm) Scapel Blade No. 15c Style Size Sterile / Pk. 2" (5.1 cm) Measuring Tape Dissecting Instruments Style Size Sterile / Pk. 1.5 (3.8 cm) Scapel Blade No. 20 Style Size Inches/Centimeters 10' (3m in cm) 173 Flexible Carbon Steel Ruler Scalpels / Blades / Rulers Style Size Sterile / Pk. 1.75" (4.5 cm) Scapel Blade No. 21 Style Size Sterile / Pk. 2" (5.1 cm) Style Size Inches/Millimeters 6" (15.2 cm) 172 Inches/Millimeters 12" (30.5 cm) 171 Inches/Millimeters 18" (45.7 cm) 170 Body Ruler Style Size Inches/Centimeters 7' (213.4 cm) 175

180 Post Mortem Needles, Double Curved Teasing Needle, Angled Point 178 Style Size Double Curved - 12 / Pk. 3" (7.6 cm) 4115 Double Curved - 12 / Pk. 3.5" (8.9 cm) 4114 Double Curved - 12 / Pk. 4" (10.2 cm) 4113 Double Curved - 12 / Pk. 4.5" (11.4 cm) 4112 Double Curved - 12 / Pk. 5" (12.7 cm) 4111 Post Mortem Needles, Half Curved Style Size Half Curved - 12 / Pk. 3" (7.6 cm) 4105 Half Curved - 12 / Pk. 3.5" (8.9 cm) 4104 Half Curved - 12 / Pk. 4" (10.2 cm) 4103 Half Curved - 12 / Pk. 4.5" (11.4 cm) 4102 Half Curved - 12 / Pk. 5" (12.7 cm) 4101 Post Mortem Thread Style Size x Waxed Polyester, 4 oz., 5 cord 300 yds. (91.4 m) 421 Teasing Needle, Straight Point Style Size Straight Point, Wooden Handle - 12 / Pk. 5.5" (14.0 cm) Style Size Angled Point, Wooden Handle - 12 / Pk. 5.5" (14.0 cm) Dissecting Tenaculum Style Size Standard Grade 6.5" (16.5 cm) Allis Dry Dissector Style Size 40 mm Curved Probe End 6" (15.2 cm) Pick s Myelotome Style Size 30mm Scraping Edge 9" (22.9 cm) 608 Grooved Needle Director Size 5" (12.7 cm) 1100 Dissection Dissecting Instruments Needles

181 179 Shandon Dissecting Instruments with Case Dissection Instruments Included With Case: Kit is available with complete set of intruments listed below. Case is also available as a stand-alone offering without instruments. Photograph may not represent actual set of instruments included with order number (kit is subject to change without notice). Dissecting Instruments Dissecting Instrument Kit Scissors Style Size Dissecting Scissors Straight, Blunt/Blunt, Standard 4.5" (11.4 cm) Dissecting Scissors Straight, Blunt/Sharp, Standard 5.5" (14.0 cm) Dissecting Scissors Straight, Blunt/Blunt, Premium 5.5" (14.0 cm) Dissecting Scissors Straight, Blunt/Blunt, Premium 4.5" (11.4 cm) Dissecting Scissors Straight, Blunt/Sharp, Premium 4.5" (11.4 cm) Dissecting Scissors Straight, Sharp/Sharp, Premium 6.5" (16.5 cm) Dissecting Scissors Curved, Sharp/Sharp, Premium 6.5" (16.5 cm) Dissecting Scissors Straight, Blunt/Sharp, Premium 5.5" (14.0 cm) Iris Scissors Curved, Premium 4.5" (11.4 cm) Iris Scissors Curved, Standard 4.5" (11.4 cm) Iris Scissors Probe Points, Angular, Premium 4.5" (11.4 cm) Dissecting Scissors Fine Points, Angular, Premium 4.5" (11.4 cm) Bone Cutting Instruments Style Size Liston Bone Shears Screw Pivot, Standard 7.5" (19.1 cm) 500 Rib Shears Curved, Screw Pivot, 1 Spring, Standard 9" (22.9 cm) 502 Plain Bone Shears Screw Pivot, 1 Spring, Standard 9" (22.9 cm) Liston Bone Cutting Forceps Box Pivot, 1 Spring, Standard 6" (15.2 cm) Rib Cutting Knife Edge: 1.625" (4.0 cm), Standar, 9" (22.9 cm) 733 Councilman s Chisel Blade: 2" x 2.25" (5.0 x 5.7 cm), Standard 7" (17.8 cm) 605 Forceps Style Size Tissue Thumb Forceps 1x2 Teeth, Standard 8" (20.3 cm) 6455 Broad Point Dressing Thumb Forceps Fine Tips, Premium 5.5" (14.0 cm) Broad Point Dressing Thumb Forceps Fine Tips, Premium 6" (15.2 cm) Broad Point Dressing Thumb Forceps Fine Tips, Standar, 5.5" (14.0 cm) 6303 Cartilage Thumb Forceps Curved, Fine Point, Standard 5" (12.7 cm) 1631 Halstead s Hemostatic Mosquito Forceps Straight, Premium 5" (12.7 cm) 7507 Dura Strip Forceps No Locks, Heavy-Duty, Standard 8.5" (21.6 cm) 1908 Other Instruments Style Size Virchow Skull Breaker Edge: 0.625" (1.5 cm), Standar, 3.5" (9.0 cm) 607 Bone Mallet Face: 1" Diameter (2.5 cm), Standard 9.5" (24.1 cm) 525 Post Mortem Hammer With Hook 8" (20.3 cm) 510 Grooved Needle Director 5" (12.7 cm) 1100 Kit Style Size Shandon Instrument Case Does Not Include Instruments 12.75" x 9.5" x 2.5" (32.4 x 24.1 x 6.4 cm ) Shandon Instrument Case With Instruments 12.75" x 9.5" x 2.5" (32.4 x 24.1 x 6.4 cm )

182 Shandon Autopsy Blades 180 Shandon Large Section Blade (with fixed arbor) For general purpose cutting or to remove skull cap and bone specimens. Includes a permanently bonded stainless steel arbor. 2.5 (6.3 cm) bottom blade width (1.1 cm) top blade width. Pkg / Qty Shandon Large Section Blade Each with Fixed Arbor Shandon Large Section Blade For general purpose cutting or to remove skull cap and bone specimens. Arbor sold separately. 2.5 (6.3 cm) bottom blade width (1.1 cm) top blade width. Pkg / Qty Shandon Large Section Blade Each Shandon Round Autopsy Saw Blade Cuts to a depth of 1.75 (44 mm). Arbor sold separately. 2.5 (6.3 cm) blade diameter. Pkg / Qty Shandon Round Autopsy Saw Blade Each Shandon Mastoid Saw For removing roof of vertabrae (laminae). Arbor sold separately (2 cm) blade width. Pkg / Qty Shandon Mastoid Saw Each Shandon Round Autopsy Saw Blade (with fixed arbor) Cuts to a depth of 1.75 (44 mm). Includes a permanently bonded stainless steel arbor. Eliminate blade slippage. Packaged individually. 2.5 (6.3 cm) blade diameter. Pkg / Qty Shandon Round Autopsy Saw Blade Each with Fixed Arbor Shandon Small Section Blade Shandon Spinal Column Saw Speclialized to remove a square-inch (645mm 2 of bone. Arbor sold separately (9.5 cm) width. Pkg / Qty Shandon Spinal Column Saw Each Extra Arbors For cutting small bones. Cuts to a depth of 0.47 (12 mm). Arbor sold separately (4 cm) bottom blade width. Pkg / Qty Shandon Small Section Blade Each Universal arbor fits all arborless blades listed. Packaged individually. Pkg / Qty Arbor Each Dissection Dissecting Instruments Autopsy Saw Blades / Arbors

183 181 Autopsy Saws Dissection Shandon Autopsy Saw Shandon Autopsy Saw V, 50/60 Hz, 1.5 Amps Shandon Autopsy Saw V, 50/60 Hz, 0.7 Amps Shandon Autopsy Saw V, 50/60 Hz Unit and Hepa Bone Dust Collector Combination Well-balanced, lightweight (3.7 lbs; 1.7 kg) saw is designed to promote user safety. (shipping weight is 2.2 kg; 4.9 lbs.) The saw s powerful motor oscillates at high speed to cut bone, not tissue. Easy to handle and cuts quickly to minimize operator fatigue. Power switch on the end of the saw slides rather than toggles to decrease the chance of accidental activation. 10-foot cord with hospital-grade plug provides maximum flexibility. UL listed. The saw s coated casing wipes clean easily. Fixed arbor large section blade (10003) is included. Saw attaches to the HEPA Bone Dust Collector. See page 182. Included arbor removes with 0.125" Allen wrench ( ). Dissecting Instruments Lipshaw Autopsy Saw Lipshaw Autopsy Saw V, 50/60 Hz 450 Lipshaw Autopsy Saw V, 50/60 Hz Footswitch for Lipshaw Autopsy Saw V, 50/60 Hz 454 Footswitch for Lipshaw Autopsy Saw V, 50/60 Hz Flexible drive shaft from the power unit to the handpiece allows for easy guidance of the saw path. Blade oscillates at high speed to cut bone, not soft tissue. Handpiece (0.7 kg) with safety flange permits firm grip and stays cool during operation. Autoclavable handpiece easily detaches from flexible drive for thorough cleaning and storage. Unit has 8' (240 cm) service cord with hospital-grade plug. Optional foot switch is availableto operate the on/off switch (sold separately). UL listed heavy-duty motor for 115V model only. Fixed arbor large section blade (10003) is included with the saw. Saw attaches to the HEPA Bone Dust Collector. See page 182. Included arbor removes with 0.125" Allen wrench ( ). Autopsy Saws Stryker Autopsy Saw StrykerAutopsy Saw V, 60 Hz 8128 Stryker Autopsy Saw V, 50 Hz Handle near blade provides good control and good balance. The saw s powerful motor oscillates at high speed to cut bone, not tissue. Easy to handle and cuts quickly to minimize operator fatigue. Power switch toggles on and off. 10-foot cord with hospital-grade plug provides maximum flexibility. Fixed arbor large section blade (10003) is included with the saw. Saw attaches to the HEPA Bone Dust Collector. See page 182. CSA listed. Included arbor removes with 0.125" Allen wrench ( ). Saw is lightweight (3.7 lbs; 1.7 kg). Shipping weight is (4.9 lbs; 2.2 kg).

184 182 SawBones Manual Bone Saw Shandon HEPA Bone Dust Collector Manual bone-sawing device makes simultaneous parallel cuts to remove a slice of bone for processing. Cuts a wide range of bones easily including difficult femoral heads. Manual design inhibits aerosols as compared with electric saws. Easy to clean. High-quality hacksaw with dual blades produce consistent cuts. 7 W x 9 L (17.8 x 22.9 cm) unit accommodates specimens up to 3" x 4 " (7.6 x 10.2 cm) in cross section and of indefinite length. Operator places the bone between the movable upper jaws and the fixed lower jaw of the SawBones to hold the specimen securely. Each SawBones includes one set of coarse and one set of fine blades. Replacement blade sets include links. Pkg / Qty SawBones Manual Bone Saw Each Replacement Blades, Coarse Set Replacement Blades, Fine Set HEPA Bone Dust Collector Nozzle Adapters Adapters fit the HEPA Bone Dust Collector to an autopsy saw. Adapters available for the Shandon Autopsy Saw, the Lipshaw 450 Saw, and the Stryker Saw. The Autopsy Saw adapter is included with the bone dust collector (adapters for other saws sold separately). Nozzle Adapter for Stryker Saw replaces standard Shandon HEPA Bone Dust Collector nozzle. Bracket Extension for Stryker Saw attaches standard nozzle to saw. Compatible with most autopsy saws including the Shandon 10000, the Lipshaw 450, and the Stryker saws. Portable and powerful 1 hp continuous-duty motor draws airborne particles into disposable receptacle. HEPA filter is 99.99% effective in trapping particles as small as 0.3 µm. HEPA filter housing seals for removal and replacement of filters to reduce chances of contact with waste material. Unit comes complete with 10' (305 cm) electrical cord with hospital-grade plug. 9' (274 cm) smooth-bore flexible, transparent vacuum hose resists trapping waste materials and is easy to clean. The autopsy saws plug directly into electrical receptacle on the side of unit; when the vacuum power is off the saw will not run. ( V model only.) Safety overload device protects motor from burnout. Anodized aluminum hose nozzle stands up to heavy use and disinfectants. Supplied with attachment for the Shandon Autopsy Saw (adapters for other saws sold separately). Case dimensions: 18" x 8" x 9" (457 x 203 x 229 mm) Shandon HEPA Bone Dust Collector, V 50/60 Hz Shandon HEPA Bone Dust Collector, V 50 Hz Shandon Autopsy Saw V, 50/60 Hz Unit and Hepa Bone Dust Collector Combination Replacement Filters - 2 / Pk Replacement Hose Nozzle Adapter s Nozzle Adapter for Shandon Saw Nozzle Adapter for Lipshaw Autopsy Saw and (order both and to aquire complete assembly. 90 Nozzle Adapter for and Stryker Saws and (order both and to aquire complete assembly. Nozzle Adapter for Stryker Saw Bracket Extension for Stryker Saw Dissection Dissecting Instruments Autopsy Saws

185 183 Shandon Dissecting Accessories Laboratory Scissor Sharpener Shandon 853 Laboratory Cart Dissection Dissecting Accessories Miscellaneous Accessories Diamond abrasives in a unique conical disk sharpens a wide variety of scissors safely, quickly and easily. Double-bevel edge stays sharp longer. Safe for quality scissors; does not detemper (with proper use). Recondition damaged and dull scissor edges. Patented technology eliminates guesswork. Dimensions (H x W x D): 4.5 x 8 x 4 (11.4 x 20.3 x 10.2 cm). CSA approved. Laboratory Scissor Sharpener, V, 50/60 Hz Shandon Pike Oil Special blend of oil keeps honing stones lubricated. Helps reduce friction during knife honing and sharpening. Available in 32 fl. oz. (945 ml) bottle. Shandon Pike Oil 313 Shandon Autopsy Saw Stand Three durable casters make this 4' (120 cm) adjustable post easy to move. Special fittings provided to hold the power unit of the Lipshaw 450 Autopsy Saw on one side and the handpiece on the opposite. Adjustable height from ( cm). Shandon Autopsy Saw Stand 451 Useful for transporting specimens, instruments and supplies. Durable stainless steel construction with double welds at corner posts provides excellent strength. Tray-type shelves (40" x 22") (101.6 x 55.9 cm) are flanged to prevent loss of fragile items. Shelves are padded underneath to reduce noise. Rubber guards prevent wall damage. Heavy-duty 5" (12.7 cm) swivel casters with locking brakes move the cart easily. Edges are seamed over for a clean appearance and additional strength. Dimensions H x W x D: 37 x 40 x 22 (94 x x 55.9 cm). Weight: 126 lbs. (57.2 kg). Shandon 853 Laboratory Cart 853 Shandon Arbor Wrench The exact size for changing blades quickly and easily. Packaged individually. Shandon Arbor Wrench 479 Shandon Stropping Powder 1,000 grit (5.0 µm) powder which is suitable for removing small nicks from knife edge. Apply sparingly to the Honing Strop surface. Available in 4 oz. (118 ml) jar. Shandon Stropping Powder 831

186 Cleaning Supplies and Odor Control 184 Suresorb Clinical Pads and Formaldehyde Neutralizer Pads Patented fiber absorbs and then locks in liquids so that work area stays drier.. Ideal for containment and disposal of body fluids containing Hepatitis B virus, AIDS/HIV and other known pathogens. Resists tearing, even when saturated. Clincal Pads applications include surgical cutting board pads, dissecting pads, autopsy table pads, and liners for body trays and cadaver bags. Formaldehyde Neutralizer Pads reduce exposure by chemically bonding with formaldehyde. The chemical reaction Formaldehyde Neutralizer Pads results in encapsulation of vapors within the pad. Formaldehyde Neutralizer Pads are ideal for grossing areas and autopsy work. Pkg / Qty Suresorb Autopsy Table Pad 10 / Cs x 80 (114.3 x 203 cm) Suresorb Dissecting Table Pad 50 / Cs x 20 (55.9 x 50.8 cm) Suresorb Surgical Cutting Board Pad 100 / Cs x 20 (55.9 x 50.8 cm) Suresorb Morgue Trough Pad 50 / Cs x 72 (45.7 x cm) Suresorb Morgue Stretcher Pad 50 / Cs x 72 (61 x cm) Suresorb Biopsy Sample Pad 400 / Cs x 10 (20.3 x 25.4 cm) Suresorb Biopsy Sample Pad 100 / Cs x 10 (20.3 x 25.4 cm) Suresorb Formaldehyde Neutralizer Pad 400 / Cs Small, 8 x 10 (20.3 x 25.4 cm) Suresorb Formaldehyde Neutralizer Pad 50 / Cs Small, 8 x 10 (20.3 x 25.4 cm) Suresorb Formaldehyde Neutralizer Pad 100 / Cs Large, 16 x 20 (40.6 x 50.8 cm) Suresorb Formaldehyde Neutralizer Pad 25 / Cs Large, 16 x 20 (40.6 x 50.8 cm) Superior Odor Control Special blend of natural oils diffuses over the area to nullify and mask unwanted odors. Use with cleaning solutions to leave area with a pleasant background aroma. Available in 1 oz. bottle. Pkg / Qty Superior Odor Control Each Superior Odor Control 6 / Pk Superior Odor Control 12 / Pk Portable Waste Container Durable, heavy-gauge stainless steel construction for heavy usage. 4-gallon capacity pail lifts off of stand. Locking cover and stand included. Stainless steel stand is supported by four rubber casters. Dimensions: 12 O.D. x 12.5 H (30.5 x 31.8 cm). Pkg / Qty Portable Waste Container Each 368 Pail Only Each 3681 Stand Only Each 3682 Locking Cover Only Each 3683 Shandon Stainless Steel Care Kit Complete supplies to keep stainless steel work surfaces clean to maintain the life and luster of your work areas. Stainless steel polish, no-scratch cleaning pads and buffing cloth included in kit. Pkg / Qty Shandon Stainless Steel Care Kit Each Dissection Dissecting Accessories Cleaning Supplies / Odor Control

187 185 Shandon Dissecting Trays and Boards Shandon Woll Drain Dissecting Tray Shandon Raised Dissecting Boards Dissection Dissecting Accessories Tray directs spillage into sink. Adjustment studs permit tray to be sloped toward the drain. Excellent for areas where spillage or contamination must be restricted. Use for cleaning glassware, urinalysis, solution preparation, bacteriological preparation and other lab applications. Shandon dissecting boards fit the tray for convenient grossing. Spout at the end of tray is 5" W x 3"L (12.7 x 7.6 cm) and is sloped at a 20 angle. Dimensions (H x W X D): 0.75 x 26.5 x 16.5 (1.9 x 67.3 x 41.9 cm). Pkg / Qty Shandon Woll Drain Dissecting Tray Each 360 Shandon AN-69 Dissecting Tray Available with either neoprene cork or polyethylene dissecting surfaces. Boards are designed as small tables with 3" (7.6 cm) feet which raise the cutting surface for working convenience. Four rubber-tipped legs resist slippage and fit into embossments on the No. 355 dissecting tray. Shandon Raised Polyethylene Dissecting Board x 23 x 16 (1.9 x 58.4 x 40.6 cm) Shandon Raised Polyethylene Dissecting Board x 12 x 11 (1.9 x 30.5 x 27.9 cm) Shandon Raised Neoprene Cork Dissecting Boards x 12 x 11 (1.9 x 30.5 x 27.9 cm) Shandon Dissecting Tray for Raised Dissecting Boards Trays / Boards Provides an elevated working surface for dissection. Perforated grid plate can be removed for easy cleaning. Accommodates polyethylene dissecting boards. Made from heavy-gauge stainless steel. Work surface is cross-creased for positive drainage and has 5" (12.7 cm) long drain cuff. Dimensions (H x W X D): 9 x 25 x 21 (22.9 x 63.5 x 53.3 cm). Four embossments on tray bottom hold No. 356 and No dissecting boards with legs. Tray provides ample space for drainage and instruments. Dimensions (H x W X D): 0.25 x x (1.3 x 41.3 x 33.7 cm). Pkg / Qty Shandon Dissecting Tray for Each 355 Raised Dissecting Boards Pkg / Qty Shandon AN-69 Dissecting Tray Each 11469

188 186 Shandon Polyethylene Dissecting Boards Shandon Neoprene Cork Dissecting Boards Durable, easy-to-clean 0.75" (1.9 cm) thick polyethylene will not dull fine surgical cutting edges. White opaque surface provides an excellent background for cutting surgical or research specimens. Photographic blue surface allows specimens to be photographed directly on the board; no need for removal to another location. Each is available in two sizes. Shandon Polyethylene Dissecting Board, white x 23 x 16 (1.9 x 58.4 x 40.6 cm) Shandon Polyethylene Dissecting Board, white x 16 x 12 (1.9 x 40.6 x 30.5 cm) Shandon Polyethylene Dissecting Board, photographic blue B x 23 x 16 (1.9 x 58.4 x 40.6 cm) Shandon Polyethylene Dissecting Board, photographic blue B x 16 x 12 (1.9 x 40.6 x 30.5 cm) Shandon Autopsy Headrests Ten positions of height, width, length and curvature vary on the faces of the headrests for maximum accommodation. Only four points contact the table, and base is curved to permit drainage materials to flow freely. Beveled corners protect autopsy surfaces from scratches. Each side of the unit is deeply curved to hold the head securely. Available in autoclavable aluminum or semi-hard rubber. Pkg / Qty Shandon Autopsy Headrest, Rubber Each 407 Shandon Autopsy Headrest, Aluminum Each 408 Permanently cemented 0.25" (6 mm) layer of neoprene cork provides a durable cutting surface over marine plywood base. Neoprene cork is composed of blended rubber and cork for a cutresistant finish. Cork permits thorough rinsing and resists absorption. Fits No. 360 Woll Drain Dissecting Tray. Rubber bumpers attach to each corner to raise the cutting surface to 1.5" (3.8 cm). Available in two sizes. Shandon Neoprene Cork Dissecting Board x 23 x 16 (1.9 x 58.4 x 40.6 cm) Shandon Neoprene Cork Dissecting Board x 16 x 12 (1.9 x 40.6 x 30.5 cm) Shandon Disposable Autopsy Headrests Styrofoam headrest is economical. Designed for sturdy support. Useful for infectious cases. Pkg / Qty Shandon Autopsy Headrest, Disposable 36 / Pk. 410 Dissection Dissecting Accessories Trays / Boards / Headrests

189 187 Shandon Storage Containers Shandon Stainless Steel Covered Container with Lid Shandon Stainless Instrument Tray Dissection Pkg / Qty Shandon Stainless Covered Container Each 362 with Lid, 1.25 qt. (1.2 L) Shandon Stainless Covered Container Each 363 with Lid, 2 qt. (1.9 L) Shandon Stainless Covered Container Each 364 with Lid, 3.2 qt. (3.0 L) Shandon Stainless Steel Deep Pan Pkg / Qty Shandon Stainless Instrument Tray Each x 5 x 2 (22.5 x 12.7 x 5.1 cm) Shandon Stainless Instrument Tray Each x 7.7 x 2.1 (31 x 19.5 x 5.4 cm) Shandon Stainless Steel Deep Instrument Tray Specimen Storage Storage Containers Pkg / Qty Shandon Deep Pan, 8 qt. (7.1 L) Each x x 2.5 (52.7 x 32.4 x 6.4 cm) Shandon Deep Pan, 14.5 qt. (13.7 L) Each x x 4.1 (52.7 x 32.4 x 10.5 cm) Shandon Deep Pan, 21 qt. (19.9 L) Each x x 6 (52.7 x 32.4 x 15.2 cm) Shandon Deep Pan, 22 qt. (20.8 L) Each x x 8 (52.7 x 32.4 x 20.3 cm) Cover for Shandon Deep Pan Each Fits 74202, 74204, 74206, Shandon Graduated Stainless Steel Beaker Inside graduated markings show milliliters and fluid ounces. Available in 16 fluid ounce (470 ml) or 32 fluid ounce (940 ml) sizes. Pkg/Qty Shandon Graduated Each 8516 Stainless Steel Beaker, 470 ml Shandon Graduated Each 8532 Stainless Steel Beaker, 940 ml Pkg / Qty Shandon Deep Instrument Tray Each 6123 Top Dimensions: 14.9 x 10.2 x 2.1 (37.8 x 25.8 x 5.4 cm) Bottom Dimensions: 12.3 x 8.6 (31.6 x 22.5 cm) Shandon Deep Instrument Tray Each 6125 Top Dimensions: 16.1 x 11.1 x 2.1 (40.9 x 28.1 x 5.4 cm) Bottom Dimensions: 13.6 x 9.2 (34.6 x 23.3 cm) Shandon Instrument Tray Each 6127 Top Dimensions: 18.1 x 12.4 x 2.4 (46 x 31.4 x 6 cm) Bottom Dimensions: 15.5 x 10.3 (39.5 x 26.2 cm) Shandon Glass Storage Container Molded of clear glass with glass lid. Large size holds enough fixative for whole brain storage. For specimen storage and display. Pkg / Qty Shandon Glass Storage Container Each fl. oz. (3.8 L) Shandon Glass Storage Container Each fl. oz. (7.6 L)

190 188 Shandon Stainless Steel Flat Instrument Tray Shandon Stainless Steel Covered Instrument Tray Pkg / Qty Shandon Flat Instrument Tray Each x 9.75 x 0.6 (34.3 x 24.8 x 1.6 cm) Shandon Flat Instrument Tray Each x 10.5 x 0.6 (38.4 x 26.7 x 1.6 cm) Shandon Flat Instrument Tray Each x 11.6 x 0.6 (43.5 x 29.5 x 1.6 cm) Shandon Flat Instrument Tray Each x 12.5 x 0.6 (48.3 x 31.8 x 1.6 cm) Shandon Disposable Containers Molded of opaque polyethylene with snap-on lids. Excellent for collection and storage of specimens. Economical. Pkg / Qty Shandon Disposable Containers, 100 / Pk fl. oz. (237 ml) Shandon Disposable Containers, 100 / Pk fl. oz. (474 ml) Shandon Disposable Containers, 100 / Pk fl. oz. (940 ml) Shandon Disposable Containers, 25 / Pk fl. oz. (2.55 L) Shandon Disposable Containers, 10 / Pk fl. oz. (5.09 L) Pkg / Qty Shandon Covered Instrument Tray Each x 3 x 1.5 (21.6 x 7.6 x 3.8 cm) Shandon Covered Instrument Tray Each x 5 x 2 (22.3 x 12.7 x 5.1 cm) Shandon Covered Instrument Tray Each x 4.1 x 2.1 (43.3 x 10.4 x 5.2 cm) Shandon Glass Storage Jar These clear glass bottles are equipped with a captive gasket and cover assembly which is held in place by a hinged spring clamp. For specimen storage and display. Pkg / Qty Shandon Glass Storage Jar Each fl. oz.(474 ml) Shandon Glass Storage Jar Each fl. oz.(769 ml) Shandon Glass Storage Jar Each fl. oz.(1.07 L) Shandon AN-306 Instrument Dissecting Table Sturdy table base fabricated from heavy-gauge stainless steel. Tapered table top with central drain hose to control fluids. Full-size neoprene cork dissecting board is included. Dimensions (H x W x D): 12 x 23 x 17 (30.5 x 58.4 x 43.2 cm). Shandon AN-306 Instrument Dissecting Table 306 Dissection Specimen Storage Storage Containers

191 189 Shandon Scales Dissection Dissecting Accessories Scales Electronic Scale and Weighing Container Battery operated digital model has a bright, easy-to-read LCD that displays up to 2,000 g. The pan has a 1,050 ml capacity. Readability as low as 1.0 g. Automatic shut-off feature. Electronic Scale and Weighing Container Complete with AC Adapter Electronic Scale Only B AC Adapter B Weighing Container B Shandon Table Scale Bracket and Support Socket All stainless steel with weld construction. Support socket clamps to edge of table. Bracket attaches and locks into position with hand knob. Bracket is height adjustable (113.3 cm) from top of bracket to bottom of pan. Shandon Table Scale Bracket 820 See Shandon Cabinetry on pages Shandon Analog Scale Stainless steel including a 13" dia. x 5" D (33 cm x 13 cm) solid bottom pan with a capacity of 1.6 gal. (6 L). Two large, heavy-duty dash pots provide positive and virtually instant readings. The dial is graduated to 3 kg in 10 g increments with a maximum capacity of 9 kg (3 revolutions). Shandon Analog Scale (order stand separately) 1320 Replacement Pan Replacement Pan with Drainage Holes 1321 Replacement Bow Replacement Ring Digital Scale Battery operated digital model has a bright, easy-to-read LCD that displays up to kg. Complete with ring, bow, and pan with drainage holes. Digital Scale (order stand separately) 1330 Replacement Pan Replacement Pan with Drainage Holes 1321 Replacement Bow Replacement Ring Shandon Portable Autopsy Scale Stand 81" ( cm) tall unit suspends scale from chain links for height adjustment. Swivel-type rubber casters move the unit easily. Scale bracket accepts any type of suspension scale. Shandon Autopsy Scale Stand 821

192 Shandon Electronic Floor Scale Shandon Electronic Floor Scale Pit Model, V, 4 x 6 (121.9 x cm), 1,000 lbs. (453.6 kg) capacity (call for other sizes) Shandon Room Lighting Fluorescent Magnifying Work Lamp Excellent for microdissection. 22 watt circular fluorescent bulb supplies even, shadowfree light for a center-mounted magnifying (3-diopter) lens. Lamp arm reaches up to 45". Cord is 5' (152.4 cm) long. UL listed. Clamp attachment secures firmly to benchtop. Fluorescent Magnifying Work Lamp, V Fluorescent Magnifying Work Lamp, V A complete line of of epoxy painted mild steel, electronic floor scales are available. Variety of sizes is available from 3' x 3' (91.4 x 91.4 cm) to 5' x 7' (152.4 x cm). Ramped models are also available. Variety of capacities is available from 1,000 to10,000 lbs. (453.6 to 4,536 kg). No mechanical adjustment is required. Hermetically sealed load sensing elements allow the user to clean the unit without damaging the weighing mechanisms. Standard scale is installed into a pit, but ramped and freestanding units are available. Pimarily constructed of stainless steel, including the load cells, weighbridge, scale frame, optional ramps. Scales meet or exceed the Class III, 5000 division accuracy with the National Institute of Standards and Technology (NIST) Handbook 44. A Certificate of Conformance, Number was issued under the National Type Evaluation Program (NTEP). Surgical Lighting Complete line of lights that provides surgical quality lighting for use in applications where high intensities and color correction are needed, but field size requirements are less critical, such as in pathology and animal surgery applications. A variety of configurations are avaialble to meet speicific lighting requirements Surgical Lighting, wall-mount, single head Surgical Lighting, track-mount, dual head Surgical Lighting, track-mount, single head Surgical Lighting, ceiling-mount, dual head Surgical Lighting, ceiling-mount, single head Surgical Lighting, mobile, single head Dissection Dissecting Accessories Room Lighting

193 191 Shandon Casework Casework Base, wall, and tall storage cabinets are available with hinged or sliding doors. Countertops are sold separately. Overview Thermo Electron manufactures and markets a variety of stainless steel casework and countertops. Typical facilities that use Shandon casework include laboratories, morgues, medical examiners, medical schools, research laboratories, and veterinary facilities. All casework has been designed with ease of use in mind. Doors and drawers both have large handles for effortless access. Drawers open smoothly as they ride along roller tracks, which reduce friction and keep drawers securely closed when not in use. Heavy duty concealed hinges assist the user by holding doors open and closed. These innovative designs allow workers to maximize their workflow potential. Capabilities All cabinets have several storage options for instruments, consumables, accessories and specimens. Both sitting and standing height cabinets have several drawer and door configurations to satisfy any facility. File, pencil and standard drawers are available in any number of arrangements. Combined with adjustable shelving, these systems promote effective storage capability. The smooth polished finish of stainless steel allows for hassle-free clean up. It s the sturdy, stain-free shine of each cabinet s surface that keeps Shandon casework looking like new year after year. Drawer hardware includes stops to keep the drawer from accidental removal.

194 192 All Shandon cabinets offer maximum versatility and are constructed of the finest quality materials and workmanship to provide years of service. Shandon Tall Storage Cabinet (shown at left). Sturdy adjustable hinges allow installers to precisely align doors to the unit. Shandon Wall Cabinet (shown below). Shelving supports are adjustable at 1.5" (3.8 cm) centers. Telescoping mechanisms similar to those used in drawer units may be used to extend the shelves. Casework Overview Capabilities European handles and simple, but elegant sliding door handles finish the cabinetry with clean, professional lines.

195 193 Casework General Specifications Equipment: Manufacturer Model: Overall Dimensions: Miscellaneous Casework Specify Shandon as manufacturer and Varies applicable part number here. Casework Ordering Information Specifications Fabrication of Cabinets: Base, wall and tall storage cabinets to be fabricated of 18 and 20 gauge Type 304 stainless steel with a #4 finish. Standard cabinets are fabricated from stainless steel. Call for information on painted cabinets. Overlapping doors and drawers conceal cabinet face and provide increased drawer storage. Utilizing the latest cabinet design technology allows the use of different materials on doors and drawer fronts if desired. Base cabinets may be provided with removable drawers or telescoping shelves behind doors. Fully enclosed back panels in all door and drawer cabinets. Ends of all cabinets to be finished for future relocation. Vented cabinets are available upon request. Fabrication of Cabinet Sub-base: Each base cabinet comes with a separate sub-base which eliminates adjustment bolt holes in cabinet bottom. Each sub-base has 1.5" (3.8 cm) adjustment bolts mounted in 12 gauge extruded weld nuts. Nuts are located 1" (2.3 cm) from the corners for added stability. Solid sub-base may be custom fabricated to support multiple cabinet units. Specify at time of quote request. Toe space to be 4" (10.2 cm) height x 3" (7.6 cm) depth at underside of cabinet. Fabrication of Doors: All doors to be 0.75" (1.9 cm) thick double pan construction. Outer pan to be 18 gauge. Inner pan to be 20 gauge. Doors to have insulation board for sound deadening and additional strength. Tapped reinforcement strips to be 14 gauge for hinge attachment. Rubber bumpers located at corners. Sliding doors provided with bottom rollers and top and bottom tracks. Solid stainless steel doors and abrasion resistant polycarbonate doors are interchangeable in the field. Abrasion resistant polycarbonate doors of 0.25" (0.6 cm) thick material with a stainless steel moulding. Key-locks are available for doors. Specify at time of quote request. Fabrication of Drawers: Drawer bodies formed of 20 gauge stainless steel with beaded top edges. Drawer heads to have insulation board for sound deadening and additional strength. Drawer sizes interchangeable in the field. Pencil drawers may be inverted and used as writing shelf. Full extension heavy-duty, ball bearing suspension with integral stops to prevent involuntary removal. Key-locks are available for drawers. Specify at time of quote request. Fabrication of Shelves: All cabinet shelves are adjustable on 1.5" (3.8 cm) centers. Shelves to have all edges flanged down 1" (2.5 cm). The flange at front and at back will be turned up at a 45 degree angle to firmly contact underside of shelf. Telescoping shelves available. These shelves use the same track mechanism as drawers, allowing pull-out access. Maximum of 10 shelves in standing height base cabinet. Shelves to be supported by brackets inserted in slots which are punched in vertical supports at each corner. Fabrication of Hardware: European-style concealed, self-closing hinges with vertical and side adjustments of approximately 0.125" (0.32 cm) meet worldwide industry standards and are backed by manufacturer s warranty. All stainless steel doors and drawers provided with black ABS plastic flush pocket pulls. Fabrication of Countertops: Formed of 14 gauge Type 304 stainless steel with reinforcing channels. All joints to be welded, ground smooth and polished to a #4 finish. Sink bowls to be integrally welded into the tops and holes punched behind for faucet hardware. All countertops with sinks will have a raised marine edge. Hairline field joints to be used only when necessary to join long sections. Composite epoxy or custom material countertops are available upon request.

196 194 Cabinetry Ordering Guidelines Base Cabinets: 1. Determine if base cabinets in your selection are either sittingheight at 29.75" high (75.57 cm) or standing-height at 36.00" high (91.4 cm). Heights do not include countertop configurations. 2. Select the cabinet desired from the options provided on the following pages of the Thermo Electron product catalog. Selections are based on door and drawer configurations, and width of cabinets needed. See Figure 1 for example of a single base cabinet. 3. If a double-wide cabinet (two single cabinets assembled together) is needed, please specify the cabinets by their part numbers. See Figure 2 for example. a. Cabinets up to (61.0 cm) wide can be used to form double-wide cabinets. b. Sitting-height and standing-height styles are not typically assembled together when building a doublewide cabinet. c. Choosing from diverse cabinet configurations allows customers to arrange base cabinets that will best suit their needs. 4. Thermo Electron offers stainless steel countertops, along with epoxy and several other material options. a. All countertops can be fabricated to include sinks, faucets and other fixtures. b. When ordering a stainless steel countertop, add 1.25" [3.175 cm] to the overall height of the assembled base cabinet. c. Alternative countertop materials come in a variety of colors. Please see a Thermo Electron sales representative for more information. d. Base cabinets may be ordered in special sizes and configurations. Please see a Thermo Electron sales representative for more information. Wall Cabinets: 1. Determine if wall cabinets in your selection are either single-shelf at 25.00" high (63.5 cm) or double-shelf at 31.00" high (78.7 cm). a. Standard wall cabinets are fabricated with either solid stainless steel or transparent mar-resistant poly carbonate doors. b. Doors either slide along tracks or mount on hinges. c. Polycarbonate doors are fabricated with a stainless steel frame for durability. d. Wall cabinets may be ordered in special sizes and configurations. Please see a Thermo Electron sales representative for more information. Tall Storage Cabinets: 1. Tall storage cabinets can be ordered as single-door or double-door units. 2. Standard tall storage cabinets include five (5) shelves for optimal storage. a. Standard tall storage cabinets are fabricated with either solid stainless steel or transparent mar-resistant polycarbonate doors. b. Doors either slide along tracks or mount on hinges. c. Polycarbonate doors are fabricated with a stainless steel frame for durability. d. Tall storage cabinets may be ordered in special sizes and configurations, including ventilated designs. Please see a Thermo Electron sales representative for more information. Casework Ordering Information Ordering Guidelines Figure 1 Figure 2

197 195 Sitting Height Base Cabinets Casework General Information Conversions 15"= 38.1 cm 18"= 45.7 cm 24"= 61.0 cm 29"= 73.7 cm 30"= 76.2 cm 35"= 88.9 cm 36"= 91.4 cm 48"= cm Height (H) Depth (D) Width (W) General Dimensions Drawer Heights (H x W x D) Drawer Letter Height x Varies x 22" A (Pencil) 3" (7.6 cm) 75.6 x Varies x 55.9 cm B (Standard) 6" (15.2 cm) C (File) 12.5" (31.8 cm) Dimensions do not include countertop heights. C C D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") A B B A Base Cabinets B C D (w 15") D (w 18") D (w 24") B B B D (w 15") D (w 18") D (w 24") B C D (w 15") D (w 18") D (w 24") A A A A A A A A A B A B B C B B Sitting Height Units D (w 15") D (w 18") D (w 24") A A A A A A B D (w 15") D (w 18") D (w 24") A A A A A A A A D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24")

198 196 Casework Base Cabinets Sitting Height Units

199 197 Standing Height Base Cabinets Casework General Information Conversions 15"= 38.1 cm 18"= 45.7 cm 24"= 61.0 cm 29"= 73.7 cm 30"= 76.2 cm 35"= 88.9 cm 36"= 91.4 cm 48"= cm Height (H) Depth (D) Width (W) General Dimensions Drawer Heights (H x W x D) Drawer Letter Height 36" x Varies x 22" A (Pencil) 3" (7.6 cm) 91.4 x Varies x 55.9 cm B (Standard) 6" (15.2 cm) C (File) 12.5" (31.8 cm) Dimensions do not include countertop heights. A A B B A A D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") Base Cabinets B C A A C B B B A A B B A A A A B A A A A A A C C C C C C D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") Standing Height Units B B B B B D (w 15") D (w 18") D (w 24") A A B B B B D (w 15") D (w 18") D (w 24") A A A A B B B D (w 15") D (w 18") D (w 24") A A A A A A B B D (w 15") D (w 18") D (w 24") A A A A A A A A B D (w 15") D (w 18") D (w 24") A A A A A A A A A A D (w 15") D (w 18") D (w 24")

200 198 Casework Base Cabinets Standing Height Units

201 199 Wall Cabinets General Information General Dimensions Casework Conversions 15"= 38.1 cm 18"= 45.7 cm 24"= 61.0 cm 29"= 73.7 cm 30"= 76.2 cm 35"= 88.9 cm 36"= 91.4 cm 48"= cm Height (H) Depth (D) Width (W) (H x W x D) Single Shelf Units 25" x Varies x 16" 63.5 x Varies x 40.6 cm Double Shelf Units: 31" x Varies x 16" 78.7 x Varies x 40.6 cm Solid Hinged Door D (w 15") D (w 18") D (w 24") Solid Hinged Door D (w 15") D (w 18") D (w 24") Polycarbonate Hinged Door D (w 15") D (w 18") D (w 24") Wall Cabinets Polycarbonate Hinged Door D (w 15") D (w 18") D (w 24") Solid Hinged Doors D (w 15") D (w 18") D (w 24") Solid Hinged Door D (w 15") D (w 18") D (w 24") Single Door Units Polycarbonate Hinged Door D (w 15") D (w 18") D (w 24") Polycarbonate Hinged Door D (w 15") D (w 18") D (w 24") Open Face D (w 15") D (w 18") D (w 24")

202 200 Casework Wall Cabinets Double Door Units

203 201 Tall Storage Cabinets General Information General Dimensions Casework Conversions 15"= 38.1 cm 18"= 45.7 cm 24"= 61.0 cm 29"= 73.7 cm 30"= 76.2 cm 35"= 88.9 cm 36"= 91.4 cm 48"= cm Height (H) Depth (D) Width (W) (H x W x D) 83" x Varies x Varies cm x Varies x Varies Single Door Units Tall Storage Cabinets Solid Hinged Door D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") Solid Hinged Door D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") Polycarbonate Hinged Door D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") Polycarbonate Hinged Door D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24") D (w 15") D (w 18") D (w 24")

204 202 Casework Tall Storage Cabinets Double Door Units

205 203 Reference Books Laboratory Methods In Histotechnology By The Armed Forces Institute of Pathology Prepared by the Armed Forces Institute of Pathology (AFIP), this updated manual including color photomicrographs, a practical approach to staining techniques currently used at AFIP. The text also supplies advice on embedding, cutting and processing. It is written by professionals who perform histologic procedures on a daily basis. Softcover. 274 pages. Pkg/Qty Lab Methods in Histology Each 139 Theory and Practice of Histotechnology, 2nd Edition By Dezna Sheehan and Barbara B. Hrapchak This is the most complete book covering state-of-the-art histotechnology. The book details the theory of special staining technique. It also explores enzyme histochemistry, immunohistochemistry, electron microscopy, ocular pathology techniques, inorganic chemistry, organic chemistry and quality control. The remainder of the book discusses instrumentation, fixation, knife sharpening, terminology, laboratory mathematics and specific special stains. This thorough book will serve well as a primer for the student, as well as a reference tool for the seasoned professional. Photomicrographs vividly illustrate the techniques required for Board of Registry Certification. This text is a Thermo Electron Corporation, Anatomical Pathology exclusive. Soft cover. 481 pages. Pkg/Qty Theory & Practice of Histotechnology 2nd Ed. Each 134 Reference Books Manual of Diagnostic Antibodies For Immunohistology By Anthony S. Y. Leong, Kum Cooper and Joel W. M. Leong Designed to fill the gap between a large textbook of immunohistochemistry and a simple suppliers catalogue, this book provides comprehensive, detailed and up-to-date coverage of virtually all commonly used IHC primary antibodies. In addition to full details of the antibodies themselves and a comprehensive list of suppliers, this book provides detailed technical information on applications and specificities of the antibodies, and tips on how to avoid potential pitfalls in their use. It will be an invaluable reference for all laboratories performing both routine and special immunostaining. Soft cover. 400 pages. Pkg/Qty Manual of Diagnostic Antibodies For Immunohistology Each B23503 Workbooks in Immunology I: Antigens and Antibodies By Jules Elias, Ph.D. This text presents principles of antibody structure and function in an easy to understand format, describing the practical aspects of antibodyantigen interaction within the framework of the immunohistochemical techniques used for detection of cell and tissue antigens. Immunofluorescence, immunoperoxidase, immunogold, and avidin-biotin methods are also discussed. This series is directed to students and immunohistochemistry professionals. Soft cover. 135 pages. Pkg/Qty Workbooks In Immunology: I Each 232 An Introduction to Medical Molecular Biology By Jules M. Elias, Ph.D. This book introduces the fundamentals of molecular biology & its techniques in a manner designed to meet the needs of histotechnologists. It starts with the basics of nucleic acid structure and function, progressing into standard hybridization techniques as well as amplification by PCR. The self-assessment format The self-assessment format assures reader comprehension. Soft cover. 216 pages. Pkg/Qty Intro To Medical Molecular Biology Each B23502

206 Trademark Index 204 Trademark ownership Carbowax Union Carbide Corp. Colorfrost Sybron Corporation Colorfrost Plus Erie Scientific Colormark Erie Scientific CytoRich Red TriPath Imaging Dell Dell Computers Envi-Ro-Tech Tech Spray, L.P. Fluoroglide Saint-Gobain Performance Plastics Lexan General Electric Plastics B.V. Micromesh Simport Plastics Limited Microsette Simport Plastics Limited Microsoft Microsoft Corp. Naugahyde United States Rubber Products, Inc. Octospot Bath Analytical Paraplast Sherwood Medical Company Paraplast Plus Sherwood Medical Company Paraplast X-tra Sherwood Medical Company Peel-A-Way Polysciences, Inc. Polycut Jung GmbH Sakura Sakura Finetek SawBones Brevis Corp. Secureline Markers Precision Dynamics Corp. Stryker Saw Stryker Corporation Superfrost Sybron Corporation Superfrost Plus Erie Scientific Suresorb National Nonwovens Corp. Uni-Capsettes Bio Plas Inc. Windows Microsoft Corp. Thermo Electron Corporation trademarks Angus-Ranieri AquaPerm Autosharp Cadenza CadenzaTags Cell-Fixx Citadel Consul Consul-Mount Coverplate Cryochrome Cryomatrix Cryotome Cytoblock CytoCheck Cytoclips Cytofunnel Cytoslide Cytospin DifTags DynaChrome Excelsior EZ Cytofunnel EZ Double Cytofunnel EZ Megafunnel EZ Single Cytofunnel EZ-Mount Finesse Formal-Fixx Gel-Tol Gill Glyo-Fixx Grosslab Gross-Star Histobath Histocentre Hypercenter Hyperclean Immu-Mount Immunon Isolator Kwik-Diff Kwik Linistain Linistat MaxiTags Megafunnel Microsharp MicroWriter Mini-Mort Mobile-Mort Mucolexx Netmon Nu-Clear Omnitags OmniTags Plus Pap-Spin Para-Release PARA TRIMMER Pathcentre PermaFluor Precision Durafuge Rapid-Chrome Rapid-Fixx Sequenza Shandon-Mount Super Mega TBD-1 TBD-2 TissueWave Varistain Zinc Formal Fixx Trademark Index

207 205 Alphabetical Index Alphabetical Index 2D barcodes A Academic materials Accu-Feed System , 22, 29 Acid alcohol Acid Fast Stain Acid-Resistant Biopsy Bags Actin Adapter, Bone Saws Adjustable height workstations to 114 Adson Thumb Forceps , 170 AEC to 94 Albumin-FITC Alkaline Phosphatase Substrate to 94 Allis Dry Dissector Alpha-1-Antichymotrypsin Alpha-1-Antitrypsin Alpha-1-Fetoprotein (AFP) AN-30 Series AN-306 Dissecting Table AN-49 Series to 126 AN-52 Hinged Hood Dissecting Table AN-54 Transportable Dissecting Table AN AN AN AN-65 Series AN-68 Series to 124 AN-69 Dissecting Tray AN AN AN-96/95 Series to 128 Analog Scale Anatomy Table , 163 Angus-Ranieri Slide Rack Antibody Diluting Medium Antigen Retrieval Anti-Rabbit Secondary Antibody Anti-Roll Plate Anti-Static Spray AquaPerm Aqueous mountant Arbor Wrench Archiving and storage to 76 Artery Scissors Automated slide stainer Autopsy Cassettes Autopsy Headrest Autopsy room planning to 122 Autopsy Saw Stand Autopsy Saws , 181, 182 Autopsy Sinks to 124 Autopsy Tables to 132 Autopsy Tables, Transportable to 126 Autosharp B Backdraft workstations to114 Bags, Body Barcode reader to 60, 62 Base cabinets to 198 Base Molds Baths B-Cell (CD20) B-Cell (CD45RA) Beaker, Stainless Steel, graduated Benchtop Fume Expeller Benchtop workstations , 110 Biopsy Bags Biopsy cassettes , 64 Blade Handle Blade Removal Instrument Blade, Large Section Blades, Autopsy Saws Blades, Disposable ,25 Blades, Dissecting Blades, Microtome Bluing Reagent Board, Dissecting , 186 Body Bags Body Refrigeration to 156 Body Ruler Body Trays , 126, 127, 142 Bone Chisel Bone Dust Collector Bone Mallet , 179 Bone Saws Bone Saws Adapter Books Brain Knife Brown filter cards Brown-Adson Thumb Forceps Brun s Metacarpal Saw Brunetti s Chisel Brush, Nylon/Stainless Steel Buffer Buffer, Phosphate Buffered Formalin Bullet Probe C C1q-FITC C3c-FITC C4c-FITC Cabinet, Forensic Evidence Cabinet, paraffin blocks Cabinet, slides Cabinetry/Cabinets to 202 Cadaver Carriers Cadaver Handling to 142 Cadaver Lifts to 138

208 Alphabetical Index 206 Cadaver Litter Cadenza Buffer Cadenza Vials and Caps CadenzaTags Calcitonin Camel hair brush , 30 Camera bracket Capsule Sponges Carbol Fuchsin Carbowax Carcinoembryonic Antigen (CEA) Care Kit, Stainless Steel Carousel Cassette MicroWriter , 58 Carousel slide stainers , 39 Carriers, Cadaver Cart Cartilage Thumb Forceps Cartons, paraffin blocks Cartridges, prefilter Case, Dissecting Instruments Cassette labeler to 60 Cassette Sponges Cassette storage Cassettes - Large Cassettes and Capsules , Cassettes in tubes to 66 Cassettes, Autopsy Cassettes, biopsy , 64 Cassettes, Disposable to 66 Casters, corrosion-resistant CE IVD , 36 Cell chambers , 82 Cell densitometer Cell preparation to 88 Cell preservatives Cell-Fixx Centrifuge , 86 Cervical cancer screening Chamber, humidity Charcoal filters Chorionic Gonadotrophin Chromogens to 94 Chromogranin Cilia Thumb Forceps Circular Flotation Bath Citadel Tissue Processor Clamps Clearing Agents Clipless funnels , 82 Cold Plate , 78 Cold point light source Collection fluids Colorfrost Plus Slides Colorfrost Slides Colormark Plus Slides , 70 Colormark Slides , 70 Constable Rib Shears Consul Coverslipper Consul-Mount Containers, Disposable Containers, Storage Coplin staining jar Corrosion-Resistant Casters Costotome Councilman s Chisel Counterstains to 52, 84, 95 Countertops Covered Container Covered Instrument Tray Coverglass forceps , 171 Coverglass staining rack Coverplate Coverslip holder Coverslipper Coverslipping Mountants ,56 Coverslips Cryobar Cryocassettes , 31 Cryochrome Cryomatrix Cryostat lubricating oil Cryostats , 30 Cryotomes , 30 Crystal Violet Custom Autopsy/Morgue Custom Grossing Workstations Custom Refrigerators to 156 Cytocentrifuge CytoCheck Cytoclips Cytofunnels , 82 Cytokeratin , 99 Cytology to 88 Cytology Mount Cytology stainer Cytology stains CytoRich Red Collection Fluid Cytoslides Cytospin D DAB to 94 Decalcification , 11 Decalcifier Deep Pan Densitometer Desmin Diamond Point Marker Dictation system DifTags Digital Scale Dispenser, formalin Alphabetical Index

209 207 Alphabetical Index Alphabetical Index Dispenser, slides Disposable blade holder Disposable blades , 25 Disposable cassettes to 66 Disposable Containers Dissecting Instruments to 182 Dissecting Instruments Case Dissecting Knife Dissecting Scissors to 167 Dissecting Tables, Transportable Dissecting Tenaculum Dissection Area Dissection, gross to 114 Dissector, Allis Dry Double Cytofunnels Double cytoslides Double frost slides Downdraft Autopsy Tables to 132 Downdraft Fume Control , 103, 129, 159 Downdraft workstations , 159 to163 Doyen s Abdominal Scissors Drawers, paraffin blocks Dressing Thumb Forceps Dropper Bottles Dropper Tips Dryer, Section DU Dublin Brain Knife Dubois Scissors Dura Strip Forceps DynaChrome to 94 E EA EA Economy Pack Electronic Scale Elevating workstations to 114, 161 Embalming Stations to 128 Embedding Blocks Embedding Center Embedding Molds Embedding resin Embedding rings Embedding Supplies , 17, 18 Enterotomy Scissors Envi-Ro-Tech Freezer Spray Eosin Y Epithelial Membrane Antigen (EMA) Epitope enhancement Equipment, Autopsy to 154 Equipment, Morgue to 154 Equipment, Necropsy to 164 Excelsior Tissue Processor Exhaust system Eye Scissors EZ Cytofunnels EZ Double Cytofunnels EZ Megafunnels EZ-Mount F Factor VIII Fast Red , 90 Fast Red/Naphthol Phosphate Tablets Fibrinogen-FITC Filter cards Filtering Dropper Tips Filters Fine Particle Filters Finesse Finesse Finesse E Finesse ME FITC PBA Fixation to 10 Fixatives to 10, 83 Fixed angle rotor Flexible Carbon Steel Ruler Flexible Probe With Eyelet Flotation Baths Fluorescent Magnifying Work Lamp Fluoroglide Forceps , 169 to 172 Forceps, coverglass , 171 Forensic Evidence Cabinet Formaldehyde neutralizing filters , 118 Formal-Fixx Formalin Collection Cup Sink Formalin dispensing system Formalin Substitute Freezer spray Frozen Section Staining Kit , 48 Fume Control Workstations to 118 Fume expeller Funnels, Cytospin , 82 G Gill 1, 2, , 95 Gill Hematoxylin , 95 Glass Coverslipper Glass coverslips Glass knife holder Glass markers Glass Scriber Glial Fibrillary Acidic Protein (GFAP) , 100 Gluck Rib Shears Glyo-Fixx Goat Non-Immune Serum Gomori s Trichrome Stain

210 Alphabetical Index 208 Gram stain Granulocyte-Associated Antigen (CD15) Gross Dissection to 114 Grossing Stations to 114 Grosslab Junior Workstations to 112 Grosslab Senior Workstations to 109 Gross-Star Pathology Workstations to 106 H H&E Frozen Section Staining Kit Halstead s Hemostate Mosquito Forceps Hammer, Post-Mortem Handle, For Blades Hanging cabinets , 199 Harrington Scissors Harris Hematoxylin Headrest, Autopsy Heat Extractor Hematoxylins , 95 Hemostatic Forceps HEPA Bone Dust Collector High profile blade holder , 32 High profile blades , 25 Histobath Histocentre Histology Mount Histology stainer Histoplast Paraffin Histotechnology books Hopper, cassettes to 60 Horizontal staining jar Hot Plate HP35 High Profile Blades Humidity chamber Hydrogen Peroxide Hyperclean Workstations to 117 I IgA, IgG, IgM, IgD, IgE-FITC Immu-Mount Immunohistochemistry , 10, 89 to 102 Immunon to 102 Immunology Workbooks Immunostaining to 102 Instant Eosin Instant Hematoxylin Instrument Case Instruments, Dissecting to 182 Iris Scissors Iron Stain Island-style Downdraft Workstation Isolation Area Isolator Hydrophobic Marker IVD , 36 J Jansen Bayonet Thumb Forceps Jar, Storage K Kappa Kappa/Lambda Mix Kappa-FITC Kelly s Hemostatic Forceps Ki-1 Antigen (CD30) Knife guards , 30, 31 Knife holders , 24, 32 Knife sharpener Knife, Brain Knife, Lab Utility Knife, Mortem , 175 Knife, Multi-Blade Knife, Post Mortem , 175 Knives, Dissecting Kuehne Coverglass Thumb Forceps Kwik-Diff Staining Kit , 51, 84 Kwik Kits Kwik Polyvalent Secondary Antibody Kwik Streptavidin-Alkaline Phosphotase Kwik Streptavidin-Peroxidase L Lab Cart Lab Support Products ,78 Lab Utility Knife Lambda Lambda-FITC Lambotte s Osteotome Lamp, Fluorescent Magnifying Lantern Slide Rack Lapping Plates , 36 Large Animal Necropsy Table Large Section Blade Laser MicroWriter Latching Mechanism, cart-to-sink Leukocyte Common Antigen (LCA) Lifts, Cadaver to 138 Lighting, Room Linear stainers , 42 Linistain GLX Stainer Linistain SLS Stainer Linistat Stainer Liquid-based cytology to 88 Liquid-based Pap test Lister Bandage Scissors Liston Bone Cutting Forceps Liston Bone Shears Littauer-Liston Bone Cutting Forceps LM Series to 132, 159 Alphabetical Index

211 209 Alphabetical Index Alphabetical Index LM-12 Submersion Anatomy Table LM LML LMR Series to 151 Low profile blade holder , 32 Low profile blades Lubricant spray Lubricating jelly Lubricating oil M M-1 Embedding Matrix Macrophage Magnifier , Mailers, slides Mailers, specimen , 76 Mallets, Bone , 179 Manual microtome Manual stainer Mask Cytoslides Mastoid Saw Blade MaxiTags Mayo Dissecting Scissors MB22 Premier Blades MB35 Premier Blades Measuring Tape Mega Cassettes Megafunnels Melanoma Metal lids for tissue cassettes Methylene Blue Metzenbaum Scissors Micro Cassettes Microdissecting Thumb Forceps , 171 Micromesh Biopsy Cassettes Microscope slides to 70 Microscope slides dispenser Microsette Biopsy Cassettes Microtome blades , 25 Microtome knife guards Microtome knife holders , 24 Microtome knife sharpener Microtome knives, stainless steel Microtome oil Microtome vises & clamps Microtomes Microwave Processor MicroWriter to 70 MicroWriter I Mini-Mort Mobile Mort Modular Embedding System MOHS Organizer Tray , 32 Molds Morgue room planning to 122 Mort, Mobile Mortem Knife , 175 Mortuary Racks to 141 Mouse Non-Immune Serum Mucin Mucolexx Mucoliquifying Multi-Blade Lab Knife Multi-spot slides MX35 Premier + Blades Myoglobin N Necropsy to 164 Needle Director Needles, Post Mortem Needles, Teasing Neoprene Cork Dissecting Board Netmon Neurofilament Neuron Specific Enolase (NSE) Neutral Buffered Formalin No-Stick Coverslips Novy Coverglass Thumb Forceps Nozzle Adapter for Bone Saws Nu-Clear Nylon Biopsy Bags Nylon Brush O Obese Body Products Odor Control OG OmniTags Kits to 94 Organized Basket , 4, 8 Orienting heads , 30, 31 Osteotome P Pan, Deep Pap Smear Papanicolaou Staining Kit PapSpin , 88 PARA TRIMMER Paraffin Paraffin block cabinet Paraffin block drawers Paraffin blocks archiving to 76 Paraffin Collector Paraffin Dispenser Paraffin Remover Paraffin Section Bath Paraplast Paraffin Paraplast Plus Paraffin Paraplast X-tra Paraffin Para-Release Spray

212 Alphabetical Index 210 Para-Tray Pathcentre Tissue Processor Pathologist s slide tray Pathology to 118 Pathology equipments to 118 Pathology Workstations to 114 PB-35 Protein/Buffer Peel-A-Way Embedding Molds Perimeter Downdraft Autopsy Table Periodic Acid Schiff (PAS) Stain Perioxidase Substrate to 94 PermaFluor , 95 Phosphate Buffer Pick s Myelotome Pike Oil Plain slides Polyethylene bags Polysine slides Polyvalent Secondary Antibody Portable Mortuary Rack Post Mortem Hammer Post Mortem Knife , 175 Post Mortem Needles Post Mortem Thread Potts-Smith Dressing Thumb Forceps Pouch, Cadaver Pouch, Disaster Precentrifugation Precision Cut Paraffin Precison Durafuge Prefilter cartridges Primary antibodies to 102 Probe with Eyelet Probe, Bullet Processing Capsules Processing Reagents & Supplies to 14 Processing Sponges Properdin-FITC Prostatic Acid Phosphatase (PAP) Protein Blocking Agent Q Quick release clamp , 27 R Rabbit Non-Immune Serum Rachiotome Rachiotomy Bone Saw Rack to 48 Racks, Mortuary to 141 Ralph glass knife holder Random Basket , 4 Rapid Mucin Stain Rapid-Chrome Staining Kits Rapid-Fixx Formalin Reagent Alcohol Reference books Refrigeration to 156 Resin clamps Rib Shears Rings, embedding Rochester-Oschner Hemostatic Forceps Roller Body Tray Room Lighting Room planning, Autopsy/Morgue to 122 Rotary microtome Rotors , 86 Round Tip Bone Saw Ruler, Body Ruler, Carbon Steel Russian Thumb Forceps S S Sakura basket carrier Satterlee Bone Saw Saw Bones Saws , 180, 181, 182 Scale Bracket Scale, Analog Scale, Digital Scale, Electronic Scales Stand Scalpels Scissor Lift Scissors to 167 Scissor sharpener Sealed Head, Cytospin Sealer, polyethylene bags Section Dryer Section Flotation Bath Sectioning, gross to 114 Secureline Marker II Sequenza Sequenza racks Shandon 465 Stretcher/Cadaver Carrier Shandon 466 Stretcher/Cadaver Carrier Shandon 825 Covered Cadaver Carrier Shandon AN-30 Series Shandon AN Shandon AN-49 Series to 126 Shandon AN Shandon AN Shandon AN Shandon AN Shandon AN Shandon AN-65 Series Shandon AN-68 Series to 124 Shandon AN Shandon AN Alphabetical Index

213 211 Alphabetical Index Alphabetical Index Shandon AN Shandon AN-96/95 Series to 128 Shandon Autosharp Shandon Biopsy Cassettes I Shandon Biopsy Cassettes II Shandon Cabinetry to 202 Shandon Citadel Shandon Colorfrost Slides Shandon Colormark Plus Slides , 70 Shandon Colormark Slides , 70 Shandon Consul Coverslipper Shandon Coverplate Shandon Cryotomes , 30 Shandon CytoCheck Shandon Cytospin Shandon DU Shandon DynaChrome to 94 Shandon Excelsior Shandon EZ Cytofunnels Shandon EZ Double Cytofunnels Shandon EZ Megafunnels Shandon Filter Guide Shandon Finesse Shandon Finesse Shandon Finesse E Shandon Finesse ME Shandon Grosslab Junior Workstations to 112 Shandon Grosslab Senior Workstations to 109 Shandon Gross-Star Pathology Workstations to 106 Shandon Histobath Shandon Histocentre Shandon Hyperclean Workstations to 117 Shandon Immunon to 102 Shandon Laser MicroWriter Shandon Linistain GLX Stainer Shandon Linistain SLS Stainer Shandon Linistat Stainer Shandon LM Series to 132 Shandon LM Shandon LML Shandon Micromesh Biopsy Cassettes Shandon Microsette Biopsy Cassettes Shandon MicroWriter to 70 Shandon MicroWriter I Shandon Netmon Shandon PapSpin , 88 Shandon PARA TRIMMER Shandon Pathcentre Shandon Sequenza Shandon Tissue Cassettes I Shandon Tissue Cassettes II Shandon Tissue Cassettes IV Shandon TissueWave Shandon Uni-Capsettes Shandon Varistain Shandon Varistain Gemini Shandon-Mount Sharpener knife Sharpener scissor Shears, Ribs Shower & Dressing Area Single Cytoslides Slide cabinets Slide clips , 42 Slide dispenser Slide dryer Slide folders Slide Grip Slide labelers , 67 Slide mailers Slide markers Slide Rack , 46, 89 Slide stainers to 42 Slide storage Slide tray , 74 Slides, archiving to 76 Slides, Colorfrost Slides, custom-made Slides, glass to 70 Slides, microscope to 70 Small Section Blade Smear, cervical Smear, Pap Snap-freezing Software, specimen tracking Spacer bar Spatula Special stains Specimen Knife Specimen labelers to 70 Specimen object disks Specimen tracking Speed freezing Spinal Column Saw Blade Spinal Cord Extractor Sponges Spray fixative Spray lubricant Spray Releasing Agent Stain Removers Stainers to 42 Staining accessories to 48 Staining Dish to 48 Staining jars to 48 Staining Rack to 48 Stainless Steel Care Kit Stainless Steel Cassettes Stainless steel microtome knives Stains to 52, 84, 95 Stains, cytology Stand for bench top workstations Stand, Autopsy Saw

214 Alphabetical Index 212 Stand, Scales Standard vise Storage cabinets to 202 Storage Container to 188 Storage Jar, Glass Storage, cassettes ,73 Storage, paraffin blocks Storage, slides Streptavidin-Alkaline Phosphotase Streptavidin-Peroxidase Diluting Medium Stretchers Stropping handle Stropping Powder Stryker Autopsy Saw Submersion Anatomy Table Super Mega Cassettes SureSorb Absorbent Pads Surgical Lighting Surgical Table Swing-out rotor Synaptophysin Synthetic Mountant Tris Buffer Trypsin Tube Occluding Clamp Hemostatic Forceps Tubed cassettes to 66 Turbidimeter Two-Hopper Cassette MicroWriter U Uni-Capsettes Universal blade holder , 32 V Vacuum chamber Varistain 24-4 and 24-4K Varistain Gemini Vent adapter kit Vertical staining jar Vimentin Virchow Brain Knife Virchow Skull Breaker Vises T Tables, Autopsy to 126, 129 to 132 Tables, Dissecting , 158 Tables, Necropsy to 164 Tables, Surgical to 164 Tall Storage Cabinets to 202 Tamping Tool for Embedding Tape, Measuring TBD-1 Decalicifier TBD-2 Decalicifier T-Cell Teasing Needles Thin-layer cell preparation Thread, Post Mortem Thumb Forceps to 172 Thumb Forceps With Magnifier Thyroglobulin Thyroid Stimulating Hormone (TSH) Tissue cassettes to 66 Tissue Marking Dyes Tissue Processors to 7 Tissue Thumb Forceps Tissues archiving to 76 TissueWave Processor Tools, Dissecting to 182 Tracking, specimen Transportable Autopsy Tables to 126 Tray, Dissecting Tray, slides Trays, Body , 126, 127, 142 Trimming blade holder W Walk-In Refrigerators to 156 Waste Container Wax Wax Collector Wax Dispenser Wax Remover Weighing Container for Electronic Scale White filter cards Woll Dissecting Tray Workbench with height adjustment Workbench, pathology Workbooks Workstation, Necropsy Workstations, bench top , 110 Workstations, pathology to 114 Wrench, Arbor , 183 Wright-Giemsa Stain X X-Tray X-rayable Body Tray Xylene Xylene Substitute Xylene Substitute Mountant Z Zinc Formal-Fixx Alphabetical Index

215 213 Numeric Index Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No. Numeric Index , , , , , , , , , , 20, 21, , , , , , , / H L , , E E/

216 Numeric Index 214 Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No , , , , / , , , , , , , , 146, , , , , , , , Numeric Index

217 215 Numeric Index Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No. Numeric Index , , , , , , , , , , , , T T T T T T T T , , ,

218 Numeric Index 216 Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No , , , 141, 142, , , 127, 139, , 145, 147, , , / , , 106, , 109, , , , , , , , , , , , , , , , , , , , , , , 95, , , , , , , , , , , Numeric Index

219 217 Numeric Index Numeric Index Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No , , , , , , , , , , , ,

220 Numeric Index 218 Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No , , , , , , , , , , , , Numeric Index

221 219 Numeric Index Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No. Numeric Index , , , , , , , CS CS CS , 38, , , , 95

222 Numeric Index 220 Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No , 38, 42, 53, , 116, , 155, 116, , 114, , , , 115, 116, , , , , , , 108, , , , 31 Numeric Index

223 221 Numeric Index Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No. Numeric Index , , 20, , , , , , , A SeriesA A A A A A A A A A A A , 31 A A A , 20 A A A A A A A A A A A A A , 40 A A , 40 A A , 40 A A A A A A A , 22 A A , 22 A A A , 22 A A A A A A A A A A A A A A A A , 59, 60, 67 A A , 60 A , 58, 60 A , 60 A , 58, 60 A , 58, 60 A A A , 59, 60, 67 A A A A , 67 A , 67 A , 67 A A A A A A A A A A A , 67 A , 67 A A A A A A A A A A A A A A , 8 A A A A A A A A A A A A A A A A A AP AP AP AP AP AP AP AP B SeriesB B B B B , 42 B B B B B B B B B BL B GR B GY B WH B YW B B AQ B BL B DBL B DGR B DRD B FGR B FPK B FYW B GR B GY B LI B OR B PE B PK B TN B WH B YW B AQ B BL B DRD B FGR

224 Numeric Index 222 Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No. B FPK B FYW B GR B GY B LI B OR B PE B PK B TN B WH B YW B AQ B BL B DGR B DRD B GR B GY B LI B OR B PE B PK B TN B WH B YW B AQ B BL B CL B GR B GY B LI B OR B PE B PK B TN B WH B YW B AQ B BL B DGR B GR B GY B LI B OR B PE B PK B TN B WH B YW B AQ B BL B GR B GY B LI B OR B PE B PK B TN B WH B YW B AQ B BL B GR B GY B LI B OR B PE B PK B TN B WH B YW B BL B GR B GY B WH B YW B B , 106 B B B , 8 B , 59, 67 B B B B AQ B BL B CL B DBL B DRD B GR B GY B LI B OR B PE B PK B TN B WH B YW B B B B B B B B B B B B B B B B B B B B B B B B B B B B , 106 B , 106 B B , 106 B , 106 B , 106 B B , 106 B B21125/B B B B B B B B B B B , 52 B B , 52 B B B B B B B SH B B B B B B B B B B B B B B B B B B B B ,62 B ,62 B B B B B B B B B , 106, 186 B B B B B B B B B B B B B B B B B B B B Numeric Index

225 223 Numeric Index Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No. Numeric Index B B B B B B B B B B B B B B B B B B B B B B CS B B B B B B AQ B AQCS B BL B BLCS B BO B BOCS B CS B GL B GLCS B GR B GRCS B LV B LVCS B PK B PKCS B RD B RDCS B TN B TNCS B YW B YWCS B B AQ B AQCS B BL B BLCS B BO B BOCS B CS B GL B GLCS B GR B GRCS B LV B LVCS B PK B PKCS B RD B RDCS B TN B TNCS B YW B YWCS D SeriesD D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D

226 Numeric Index 224 Order No. Page No. Order No. Page No. Order No. Page No. Order No. Page No. D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D P SeriesD P P , 4 P P P , 20 Numeric Index

227 Customer Support Guide At Thermo Electron Corporation, we are dedicated to providing our customers with not only the highest quality equipment and consumable products, but also to facilitating the process by which they are used and supported. Please use the following guide when placing a call so that we may more effectively assist you with your inquiry or need. If your specific need is not addressed below, please feel free to call 1 (800) in the United States or Internationally, and an operator will appropriately direct your call. Customer Service Quotations Department Service Department Product Specialists Place a new order. Check or modify an existing order. Inquire about stock / delivery status. Obtain part numbers for general products. Facilitate a return. Obtain a quote on a standard product or service. Modify an existing quote. Check the status of a pending quote. Report an equipment malfunction or breakdown. Schedule a service call. Obtain part numbers for replacement and repair parts. Obtain specific product information. Inquire about equipment operation / functionality and proper equipment usage. Inquire about consumables applications and proper usage of consumable products. Inquire about protocol / procedure issues (i.e. tissue processing, microtomy, staining, etc.) United States Tel: 1 (800) Fax: +1 (412) Electronic Data Interchange: Tel: 1 (800) ext Fax: +1 (412) Tel: 1 (800) ext. Domestic Pricing: ext Export Pricing: ext Pricing Contracts / Buying Groups: ext Fax: +1 (412) Tel: 1 (800) Fax: +1 (412) Tel: 1 (800) Fax: +1 (412) United Kingdom Tel: Tel: Tel: Fax: +44 (0) Tel: +44 (0) Germany Tel: +49 (0) 6103/ Fax: +49 (0) 6103/ Tel: +49 (0) 6103/ Fax: +49 (0) 6103/ Tel: +49 (0) 6103/ Fax: +49 (0) 6103/ Tel: +49 (0) 6103/ Fax: +49 (0) 6103/ France Tel: Fax: Tel: Fax: Tel: Fax: Tel: Fax:

228 Technical Services by Thermo Electron Rest easy knowing that your Thermo equipment is protected with top-quality service. Our factory-trained technicians are conveniently located throughout the United States and in your local countries and have more than 200 years of collective experience in servicing Thermo Electron Anatomical Pathology equipment. Thermo s service team participates in ongoing training and education to stay ahead of rapidly changing technology. Only original factory parts are used for repair and maintenance. As one of Thermo Electron Corporation's worldwide customers, you can rest easy knowing that you have purchased quality and durability from one of the most trusted names in laboratory products and services. Your instrument requires occasional maintenance to ensure that it operates at peak performance. That is why we provide several maintenance agreement options. You can be sure that our factory-trained service engineers know our products better than anyone else. Contact Service United States: 1 (800) United Kingdom: Germany: +49 (0) 6103/ France: Twelve month warranty is standard with the purchase of every Anatomical Pathology instrument. In the United States and selected countries, we offer multiple service plans so you have the flexibility of selecting the coverage that best meets your needs: Gold Plan Silver Plan Bronze Plan Our Gold Plan provides maximum coverage and priority response. It covers all costs including labor, travel time, expenses, and parts. An annual preventative maintenance inspection is performed by a factory certified service engineer to provide continued optimal performance of your Thermo instrument. Our Silver Plan offers the same coverage as our standard manufacturer s warranty. All repair costs are included and pre-budgeted so you do not experience the surprise of unplanned expenses. Our Bronze Plan is a prevention plan. Once a year, one of our factory certified service engineers will perform preventative maintenance inspection on your instrument to ensure that your instrument is working properly and meeting factory standard specifications. Service includes instrument lubrication, cleaning, calibration, and performance checks, as applicable.

229 Shandon LabLeader An international laboratory publication in Anatomical Pathology. The Shandon LabLeader is an international publication seen and read by clinical laboratory professionals throughout the world. The LabLeader is a semi-annual publication focusing on unique laboratory protocols and applications, as well as updates on Thermo product offerings and news. Article Submission Any laboratory professional who receives the LabLeader is invited to submit articles for publication. Include name(s) of author, professional titles, place of employment, daytime phone number and fax number with article. Compensation will be considered for articles chosen to be published in the LabLeader. Please submit articles to: Laboratory professionals are invited and welcome to submit articles for publication. Compensation will be considered for any article that is published in the LabLeader. Thermo reserves the right to edit materials used for publication. Please see the information on left for article submission, reprints and back issues. Thermo Electron Corporation Anatomical Pathology 171 Industry Drive, Pittsburgh, PA 15275, USA Attn: Angus Gus Miller Phone: Fax: angus.miller@thermo.com We reserve the right to edit materials presented for this publication. Reprints & Back Issues For reprints of articles and previous issues of LabLeader contact:: Thermo Electron Corporation Anatomical Pathology 171 Industry Drive, Pittsburgh, PA 15275, USA Attn: Penny Slan Phone: Fax: penny.slan@thermo.com Please note: The Lableader is intended as a forum for the timely discussion of information and events of interest to laboratory professionals. Full technical knowledge of materials and methods printed herein is the responsibility of the reader prior to attempting published protocol. Thermo Electron carefully reviews the content of the LabLeader for accuracy. However, Thermo assumes no responsibility or liability for the statements, opinions and procedures advanced by contributors.

230 Anatomical Pathology Calendar Since 1986, calendars displaying photomicrographs of specimens prepared on Shandon brand products have been spotted everywhere from laboratory walls to television shows. That year, Thermo Electron Corporation Anatomical Pathology (then known as Shandon Inc.) decided to offer customers a new way to showcase specimens, which would incorporate images of final slide preparations using Shandon branded equipment or consumables sold by Thermo. Since then, the calendar has become an integral part of laboratories throughout the world. Often, customers are curious as to the process of selecting the images that appear on the calendar each year. The selection process is involved and is taken very seriously by the selection committee. Ultimately, the selection process begins with qualified entries from customers throughout the world. Entries are to be submitted as 35 mm transparencies, or as digital images, and should not have been previously published or submitted for publication elsewhere. Customers may submit as many entries as they like; a separate entry form for each submission is required. As entries are received, they are logged in and assigned a number. This number and the specimen description are the only identification that is provided to the selection committee. All entries become the property of Thermo Electron Corporation Anatomical Pathology. After the close of the competition at the end of June, all entries are reviewed by Thermo Anatomical Pathology s Product Specialists all board certified Histologists and Cytologists as well as the Quality Assurance Manager who is a board certified Medical Technologist. Marketing personnel are also included in the review process. Entries are reviewed for the quality of the specimen presented in the photomicrograph, as well as for originality and composition. Semi-finalists are chosen from the entries, and these are again reviewed. If there are any questions concerning the specimen or spellings, the entrants are contacted by a Product Specialist for clarification. Twelve finalists are then selected for the calendar. Occasionally, more than one entry from a customer may be selected. Customers whose entries have been selected are notified by the beginning of October. Beginning with the 2003 calendars, those customers whose entries were selected not only had their name and birthday printed on the calendar, they also received an award certificate, as well as a dozen copies of the calendar. A letter of thanks and a copy of the calendar are also sent to those customers whose entries were not selected. A copy of the entry form for the next year s calendar is printed on the back of each calendar. This may be photocopied in order to submit an entry. A PDF image of the entry form is also posted on our website, and may be printed out and copied as needed. Entries are eligible from, but not limited to, Histology, Cytology, Parasitology, Microbiology, Hematology, Virology, Immunology, Bacteriology and Electron Microscopy. Entries from customers in other disciplines, using Thermo products to prepare their specimens, are welcomed and encouraged. All entries should be sent to: Photomicrography Competition, Thermo Electron Corporation, Anatomical Pathology, 171 Industry Drive, Pittsburgh, PA 15275, USA.

231 Anatomical Pathology on the Web Thermo Electron Corporation has unveiled a new and improved one Thermo site redesigned to: present content in a more customer-friendly manner provide faster and more effective search with "best bet" results demonstrate the breadth of Thermo products and services facilitate your interactions with the most appropriate Thermo Sales or Service representative We value your relationship with Thermo Electron Corporation and are working hard to better meet your needs. Bookmark us now at and start receiving the advantages of a fully integrated One Thermo site. You are also invited to become a registered visitor on Gain access to additional product resources, technical manuals and important market information. You can also sign-up to be on one or more Thermo distribution lists. Rest assured your profile information will be kept private. We look forward to your next visit to and welcome your feedback.

232 Shandon Brochure Showcase Anatomical Pathology Overview Brochure Order No. M Shandon Tissue Processors Brochure Order No. M Shandon Cytospin 4 Brochure Order No. M Shandon Slide Stainers Brochure Order No. M Shandon TissueWave Brochure Order No. M Shandon Histocentre 3 Brochure Order No. M Shandon MicroWriter Brochure Order No. M Shandon Gross-Star Brochure Order No. M Anatomical Pathology Catalog Order No. M Bioscience Technologies Product Guide 2004 Contact: 1 (866) 9 THERMO ( ) International: +44 (0)

233 Your Partner in Anatomical Pathology One Source, Total Solutions Position your laboratory for optimum safety and efficiency by choosing from among Anatomical Pathology s comprehensive array of instrumentation and consumable offerings. You will enjoy the peace of mind that comes from the knowledge that you selected the premier products available in the marketplace from a partner organization you can trust to ensure your ongoing success. For more complete information on Anatomical Pathology s products and services, please contact us at your convenience, at our site nearest to you. Thermo products and services for the Anatomical Pathology Lab: Shandon Pathology Workstations Shandon Cytocentrifuges Shandon Tissue Processors Shandon Cryostats Shandon Microtomes Shandon Embedding Systems Shandon Stainers Shandon Coverslippers Shandon Cassette/Slide Labelers Shandon Consumables Forma Incubators Forma Freezers & Refrigerators Forma Biological Safety Cabinets Hybaid Thermal Cyclers Finnpipettes IEC Centrifuges Thermo Financial Services Thermo Instrument Service

234 Introducing our New Anatomical Pathology Catalog Name: h Institution Name: Address: Title: Dept. / Room No. City: State: Postal Code: Tel: Type of Workplace h Hospital h Private Clinical Laboratory h Medical School h Medical Examiner h Veterinary Lab h Others, please specify: Size of Hospital h Under 100 beds h beds h beds h beds h Over 750 beds Section in Lab h Blood Bank h Blood Gas h Clinical Chemistry h Cytology h Hematology h Histology h Immunology h Microbiology h Pathology h Serology h Specimen Collection h Toxicology h Urinalysis h Autopsy/Morgue h Please rush me a copy of the Anatomical Pathology Catalog. Others, please specify: Fax: Tell us what type of Anatomical Pathology products that you use in your lab (list all equipment and consumables): Register today to receive the latest product announcements and special offers from Thermo Electron. h Yes! Sign me up. h No, thanks. Update your mailing records with us today by visiting us on the web, or complete and return the attached reply card via mail or fax. Fax: +1 (412) Web: h Name: Institution Name: Address: Title: Dept. / Room No. City: State: Postal Code: Tel: Type of Workplace h Hospital h Private Clinical Laboratory h Medical School h Medical Examiner h Veterinary Lab h Others, please specify: Size of Hospital h Under 100 beds h beds h beds h beds h Over 750 beds Section in Lab h Blood Bank h Blood Gas h Clinical Chemistry h Cytology h Hematology h Histology h Immunology h Microbiology h Pathology h Serology h Specimen Collection h Toxicology h Urinalysis h Autopsy/Morgue h Please rush me a copy of the Anatomical Pathology Catalog. Others, please specify: Tell us what type of Anatomical Pathology products that you use in your lab (list all equipment and consumables): Fax: Register today to receive the latest product announcements and special offers from Thermo Electron. h Yes! Sign me up. h No, thanks.

235 Please Affix Postage Here Thermo Electron Corporation Anatomical Pathology 171 Industry Drive Pittsburgh, PA Please Affix Postage Here Thermo Electron Corporation Anatomical Pathology 171 Industry Drive Pittsburgh, PA

236