Product Catalogue. Cooler by Design

Size: px

Start display at page:

Download "Product Catalogue. Cooler by Design"

Amie Washington
5 years ago
Views:

1 Product Catalogue Cooler by Design 1

hot cookline applications...page 4 Chef base units - cool cookline applications...page 5 Under-counter single drawer units...page 6 Under-counter two drawer units.

2 PRICE LIST INDEX IMPORTANT INFORMATION BLAST CHILL DRAWERS COMPACT DRAWER UNITS Blast chill drawers...page 3 Compact drawer units...page 3 WHEN DESIGNING YOUR KITCHEN AND SELECTING ADANDE UNITS PLEASE BE AWARE THAT THEIR UNIQUE, PATENTED DESIGN ALLOWS THEM TO BE USED DIFFERENTLY TO CONVENTIONAL REFRIGERATION Chef base units - hot cookline applications...page 4 Chef base units - cool cookline applications...page 5 Under-counter single drawer units...page 6 Under-counter two drawer units... page 7 Prep counter units with solid worktops...page 8 Saladette units...page 9 Matchbox pass-through units...page 10 Prep counters with gantries...page 11 Built in flat base cassette units...page 12 Three drawer storage units...page 13 WHEN CONSIDERING STORAGE REQUIREMENTS NOTE THAT THE STANDARD ADANDE DRAWER GIVES EASY ACCESS TO FOUR 1/1 (100 MM DEEP) GASTRONORM PANS. A TWO-DRAWER UNIT STORES AT LEAST THE EQUIVALENT OF A 500 LITRE UPRIGHT OR A THREE-DOOR COUNTER CABINET. TO REDUCE THE NUMBER OF UNITS REQUIRED CONSIDER HOW YOUR CHILLED AND FROZEN STORAGE REQUIREMENTS VARY, BY MENU AND SEASON. MAKE USE OF THE FACT THAT EACH DRAWER CAN BE SWITCHED FROM FRIDGE TO FREEZER AND BACK IN MINUTES. ADANDE DRAWERS ARE IDEAL FOR STORAGE IN THE BUSIEST AREAS OF THE KITCHEN. THEY DO NOT LOSE COLD AIR ON OPENING SO REPEATED OPENINGS WILL NOT AFFECT FOOD QUALITY. THERE ARE NO RESTRICTIONS AS TO WHERE ADANDE UNITS CAN BE LOCATED. THEY MAY BE INSTALLED AT THE HEART OF THE COOKLINE DIRECTLY UNDER GRIDDLES, OR ADJACENT TO OVENS, AND AGAINST A WALL, WITHOUT LOSS OF PERFORMANCE. THE UNRIVALLED TEMPERATURE STABILITY, THE UNIQUE AIRFLOW AND INSULATED DRAWER DESIGNS, ENSURE THAT FOOD QUALITY AND SAFETY STAY HIGH, AND THAT CONDENSERS DO NOT BLOCK EVEN IN THE HOTTEST PART OF THE KITCHEN. PLEASE NOTE THAT ALL PRICES INCLUDE COVER AGAINST ACCIDENTAL DAMAGE TO SEALS AS PART OF THE WARRANTY. THE UNIQUE DESIGN OF ADANDE DRAWER UNITS ENSURES THAT THEIR SEALS ARE HIDDEN AND PROTECTED FROM HARM. UP TO THREE ADANDE DRAWERS CAN BE RUN FROM A SINGLE 13 AMP SOCKET AND THEY CONSUME FAR LESS ENERGY AND PUT OUT LESS HEAT THAN CONVENTIONAL REFRIGERATION. 40%-60% ENERGY SAVING OR MORE. IF YOU ARE UNFAMILIAR WITH ADANDE UNITS THEN PLEASE REQUEST A FREE TRIAL TO SEE HOW THEY WILL IMPROVE YOUR KITCHEN AND PRECISELY WHY THEY ARE CHEAPER TO OWN. OVER 96% OF THOSE WHO HAVE TRIALLED UNITS HAVE SUBSEQUENTLY PURCHASED THEM. INTERNAL VIEW OF DRAWER SHOWING BLAST CHILL AIRFLOW A refrigeration industry first - if specified at purchase, both Adande Side Engine (VCS) and Matchbox (VCM) units can be built with Blast Chilling added to their fridge to freezer functionality. Each drawer will have a blast chilling capacity of 5 to 7 kgs. See picture to the right. This flexibility makes Adande Drawers ideal for the Cook-Chill system of food preparation, increasing the productivity of any foodservice operation. B3 Just 450 mm wide, Adande Compact units provide convenient storage next to griddle and fry stations. Compacts have many other uses, from refrigerated upright bottle storage to frozen ices and, being small and easy to move, are ideal for outside catering. VCC - REAR ENGINE COMPACT 800 mm 450 mm Drawer Storage Capacity 1 x 1/1 GN Pan 200 mm Deep at the bottom 1 x 1/1 GN Pan 100 mm Deep on top Drawer management systems...page 14 Drawer customising options...page 15 Technical & service information...page 16 It s an Adande... it works like no other fridge or freezer For full technical specifications of Adande s award winning products as well as case studies showing many varied uses visit Code VCS/ VCM/ BLAST CHILL OPERATION - SIDE ENGINE UNITS BLAST CHILL OPERATION - MATCHBOX UNITS 2 x B3 2 WIRE RACKS SUPPLIED WITH EACH BLAST CHILL DRAWER B3 ADDITIONAL BLAST CHILL WIRE RACKS - HALF DRAWER SIZE THE HYDROCARBON REFRIGERANT () OPTION IS NOT AVAILABLE ON BLAST CHILL DRAWERS Code Fin Height Wt. Loading VCC1/DCT COVER TOP & DOUBLE CASTORS 845 mm 0 kg VCC1/GCW SOLID TOP & STANDARD CASTORS 900 mm 300 kg VCC1/HCW SOLID TOP & HIGH CASTORS 948 mm 300 kg BLAST CHILL OPTION IS NOT AVAILABLE ON COMPACT (VCC) UNITS COMPACT UNITS HAVE THE SAME FRIDGE TO FREEZER FLEXIBILITY AS STANDARD SIZE ADANDE DRAWERS

CHEF BASE UNITS - HOT COOKLINE APPLICATIONS CHEF BASE UNITS - COOL COOKLINE APPLICATIONS Heat Shield (HS) worktops can be extended, to accommodate larger items of cooking equipment, and/or to provide

withstand temperatures up to 200 C. Chef Bases can be supplied with a variety of castors and rollers to achieve specific worktop heights and cooking equipment weight loadings.

Heat Shield (HS) worktops can be extended, to accommodate larger items of cooking equipment, and/or to provide a storage void under the worktop - see page 15 for information and prices on extended

3 CHEF BASE UNITS - HOT COOKLINE APPLICATIONS CHEF BASE UNITS - COOL COOKLINE APPLICATIONS Heat Shield (HS) worktops can be extended, to accommodate larger items of cooking equipment, and/or to provide a storage void under the worktop - see page 15 for information and prices on extended worktops Adande Chef Bases with heat shield (HS) worktops are designed to accommodate hot cooking equipment, and withstand temperatures up to 200 C. Chef Bases can be supplied with a variety of castors and rollers to achieve specific worktop heights and cooking equipment weight loadings. These units can also be fitted with fixed frames (FF) where a particular worktop finished height, between 590 and 900 mm, is required. Heat Shield (HS) worktops can be extended, to accommodate larger items of cooking equipment, and/or to provide a storage void under the worktop - see page 15 for information and prices on extended worktops Solid Worktops (W) can be extended, to accommodate larger items of equipment, and/or to provide a storage void under the worktop - see page 15 for information and prices on extended worktops Chef Base units with solid worktops (W) to accommodate cooking equipment, such as induction hobs. Chef Bases can be supplied with a variety of castors and rollers to achieve specific worktop heights and cooking equipment weight loadings. These units can also be fitted with fixed frames (FF) where a particular worktop finished height, between 590 and 900 mm, is required. Solid Worktops (W) can be extended, to accommodate larger items of equipment, and/or to provide a storage void under the worktop - see page 15 for information and prices on extended worktops VCS1/HCHS HIGH CASTORS 616 mm 235 kg VCS1/CHS STANDARD CASTORS 545 mm 300 kg VCS1/RHS ROLLERS & FEET 501 mm 285 kg VCS1/SRHS SMALL ROLLERS & FEET 491 mm 285 kg VCS1/FFHS FIXED FRAME mm 235 kg VCR1/HCHS HIGH CASTORS 616 mm 235 kg VCR1/CHS STANDARD CASTORS 545 mm 300 kg VCR1/RHS ROLLERS & FEET 501 mm 285 kg VCR1/SRHS SMALL ROLLERS & FEET 491 mm 285 kg VCR1/FFHS FIXED FRAME mm 235 kg VCS1/HCW HIGH CASTORS 570 mm 235 kg VCS1/CW STANDARD CASTORS 503 mm 300 kg VCS1/SCW SMALL CASTORS 482 mm 50 kg VCS1/RW ROLLERS & FEET 459 mm 285 kg VCS1/SRW SMALL ROLLERS & FEET 449 mm 285 kg VCS1/FFW FIXED FRAME mm 235 kg VCR1/HCW HIGH CASTORS 570 mm 235 kg VCR1/CW STANDARD CASTORS 503 mm 300 kg VCR1/SCW SMALL CASTORS 482 mm 50 kg VCR1/RW ROLLERS & FEET 459 mm 285 kg VCR1/SRW SMALL ROLLERS & FEET 449 mm 285 kg VCR1/FFW FIXED FRAME mm 235 kg 4 5

UNDER COUNTER SINGLE DRAWER UNITS UNDER-COUNTER TWO DRAWER UNITS Mobile Frame (MF) and Fixed Frame (FF) units can be specified with finished heights between 590 and 900 mm Single drawer units for non

For very hot applications, an air gap of at least 50 mm is required between the Adande top and the underside of the counter or range.

Drawer units can be supplied with a variety of castors and rollers to achieve specific heights to roll under existing counters or ranges.

FRAME 590-900 mm 0 kg VCS1/MFT MOBILE FRAME 590-900mm 0 kg VCR1/HCT HIGH CASTORS 561 mm 0 kg VCR1/CT STANDARD CASTORS 494 mm 0 kg VCR1/SCT SMALL CASTORS 473 mm 0 kg VCR1/RT ROLLERS & FEET 450 mm 0 kg

4 UNDER COUNTER SINGLE DRAWER UNITS UNDER-COUNTER TWO DRAWER UNITS Mobile Frame (MF) and Fixed Frame (FF) units can be specified with finished heights between 590 and 900 mm Single drawer units for non load-bearing under-counter and cookline applications. Drawer units can be supplied with a variety of castors and rollers to achieve specific heights to roll under existing counters or ranges. For very hot applications, an air gap of at least 50 mm is required between the Adande top and the underside of the counter or range. Mobile Frame (MF) and Fixed Frame (FF) units can be specified with finished heights between 590 and 900 mm Two Drawer units for non load bearing under counter and cookline applications. Drawer units can be supplied with a variety of castors and rollers to achieve specific heights to roll under existing counters or ranges. For very hot applications, an air gap of at least 50 mm is required between the Adande top and the underside of the counter or range. VCS1/HCT HIGH CASTORS 561 mm 0 kg VCS1/CT STANDARD CASTORS 494 mm 0 kg VCS1/SCT SMALL CASTORS 473 mm 0 kg VCS1/RT ROLLERS & FEET 450 mm 0 kg VCS1/SRT SMALL ROLLERS & FEET 440 mm 0 kg VCS1/FFT FIXED FRAME mm 0 kg VCS1/MFT MOBILE FRAME mm 0 kg VCR1/HCT HIGH CASTORS 561 mm 0 kg VCR1/CT STANDARD CASTORS 494 mm 0 kg VCR1/SCT SMALL CASTORS 473 mm 0 kg VCR1/RT ROLLERS & FEET 450 mm 0 kg VCR1/SRT SMALL ROLLERS & FEET 440 mm 0 kg VCR1/FFT FIXED FRAME mm 0 kg VCR1/MFT MOBILE FRAME mm 0 kg VCS2/CT STANDARD CASTORS 891 mm 0 kg VCS2/SCT SMALL CASTORS 870 mm 0 kg VCS2/RT ROLLERS & FEET 847 mm 0 kg VCS2/SRT SMALL ROLLERS & FEET 837 mm 0 kg 6 7 VC/CT STANDARD CASTORS 891 mm 0 kg VC/SCT SMALL CASTORS 870 mm 0 kg VC/RT ROLLERS & FEET 847 mm 0 kg VC/SRT SMALL ROLLERS & FEET 837 mm 0 kg

PREP COUNTER UNITS WITH SOLID WORKTOPS SALADETTE UNITS S2 - Standard Saladette GN Pan Configurations W945 x D389 x H230 mm S3 - Large Saladette GN Pan Configurations W945 x D552 x H240 mm STANDARD

provide a storage void under the worktop - see page 15 for information and prices on extended worktops.

Saladettes provide counter convenience for dispensing ingredients for pizzas, salads and garnishes.

Adande Saladettes are available in two sizes (S2 & S3) to suit different Gastronorm Pan configurations.

Saladette worktops are either standard or extended 1400 mm wide.

There is no difference in price between these 3 worktop depths. Mobile Frame (MF) and Fixed Frame (FF) units available, with choice of finished height between 590 and 900 mm.

5 PREP COUNTER UNITS WITH SOLID WORKTOPS SALADETTE UNITS S2 - Standard Saladette GN Pan Configurations W945 x D389 x H230 mm S3 - Large Saladette GN Pan Configurations W945 x D552 x H240 mm STANDARD VCS2 UNIT WITH SALADETTE - S2 EXTENDED WORKTOP VCS1 ON MOBILE FRAME (MF) + SALADETTE - S3 Solid worktops on VCS & VCR units can be extended, to accommodate larger items of equipment, and/or to provide a storage void under the worktop - see page 15 for information and prices on extended worktops. Seamless stainless steel double worktops (DW) can be fitted to a pair of two drawer VCS or VCR counter units - specs and prices as below. Saladettes provide counter convenience for dispensing ingredients for pizzas, salads and garnishes. Cooling for each Saladette unit comes directly from the refrigeration circuit feeding the host drawer on which the Saladette is fitted. Adande Saladettes are available in two sizes (S2 & S3) to suit different Gastronorm Pan configurations. When the Saladette is in use, the host drawer will only operate as a chiller, but can be switched to freezer mode when the Saladette is turned off. Saladette worktops are either standard or extended 1400 mm wide. Additionally, to create larger plating-up areas, there is a choice of 3 worktop depths - 740, 800, & 850 mm - as depicted in the adjacent illustration and picture above. There is no difference in price between these 3 worktop depths. Mobile Frame (MF) and Fixed Frame (FF) units available, with choice of finished height between 590 and 900 mm mm 740 mm 800 mm 850 mm Code Worktop plating up depths Code Worktop plating up depths VCS2/CW STANDARD CASTORS 900 mm 230 kg VC/CW STANDARD CASTORS 900 mm 230 kg VCS2/CW/S2 S2 STANDARD WORKTOP 350 mm / 410 mm / 460 mm VCS1/MFW/S2 MOBILE FRAME - STD W/TOP 350 mm / 410 mm / 460 mm VCS2/RW ROLLERS & FEET 856 mm 225 kg VC/RW ROLLERS & FEET 856 mm 225 kg VCS2/CW/S3 S3 STANDARD WORKTOP 185 mm / 245 mm / 295 mm VCS1/FFW/S2 FIXED FRAME - STD W/TOP 350 mm / 410 mm / 460 mm VCS2/SRW SMALL ROLLERS & FEET 846 mm 225 kg VC/SRW SMALL ROLLERS & FEET 846 mm 225 kg VCS2/CW/S2/EW1400 S2 EXTENDED WORKTOP 350 mm / 410 mm / 460 mm VCS1/MFW/S2/EW1400 MOBILE FRAME - EXT W/TOP 350 mm / 410 mm / 460 mm VCS2/SCW SMALL CASTORS 879 mm 0 kg VCS2/SCW SMALL CASTORS 879 mm 0 kg VCS2/CW/S3/EW1400 S3 EXTENDED WORKTOP 185 mm / 245 mm / 295 mm VCS1/FFW/S2/EW1400 FIXED FRAME - EXT W/TOP 350 mm / 410 mm / 460 mm BLAST CHILL OPTION - BOTTOM DRAWER ONLY VCS1/MFW/S3 MOBILE FRAME - STD W/TOP 185 mm / 245 mm / 295 mm HYDROCARBON OPTION - BOTTOM DRAWER ONLY NB: BOTTOM DRAWER CANNOT HAVE & TOGETHER - THEY ARE MUTUALLY EXCLUSIVE VCS1/FFW/S3 FIXED FRAME - STD W/TOP 185 mm / 245 mm / 295 mm VCS1/MFW/S3/1400 MOBILE FRAME - EXT W/TOP 185 mm / 245 mm / 295 mm VCS1/FFW/S3/EW1400 FIXED FRAME - EXT W/TOP 185 mm / 245 mm / 295 mm 8 BLAST CHILL & HYDROCARBON OPTIONS NOT AVAILABLE ON VCS1 SALADETTES 9

Fixed Frame (FF) units can be specified with finished heights between 590 and 900 mm 710 mm 1120 mm Pass-Through or Matchbox (VCM) units give access to stored ingredients from both sides of an island

Matchbox units are available with simple cover tops (T) for undercounter applications and solid worktops (W) where food preparation surfaces are required.

6 MATCHBOX PASS-THROUGH UNITS. PREP COUNTERS WITH GANTRIES VCM - UNDER COUNTER (or BUILT-IN) MATCHBOX UNIT VCM - MATCHBOX UNIT WITH SOLID WORKTOP UNIT WITH SINGLE SHELF GANTRY UNIT WITH 2 SHELF PLATE GANTRY Mobile Frame (MF) and Fixed Frame (FF) units can be specified with finished heights between 590 and 900 mm 710 mm 1120 mm Pass-Through or Matchbox (VCM) units give access to stored ingredients from both sides of an island unit - an ergonomic solution for commercial kitchens where space is limited. Matchbox units are available with simple cover tops (T) for undercounter applications and solid worktops (W) where food preparation surfaces are required. For built-in applications, one and two drawer Matchbox units can be suited in, cassette style, to a cook range, or under-counter for those designs where the kitchen equipment is mounted on a plinth, raising everything above floor level mm 1120 mm Mobile Frame (MF) and Fixed Frame (FF) units can be specified with finished heights between 590 and 900 mm Two Drawer VCS units can be extended to the left (CM5) or right (CM3) to provide a single shelf gantry above the worktop (space for 3 Microwave Ovens) and storage shelf below, making a versatile prep station, to which items like a Can Opener (Page 15 for price) can be fitted. Dimensions for VCS2/CM3 & CM5 extended worktop units are 1700w x 700d x 900h mm. Storage Gantries can be fitted, providing a platform for cooking equipment, such as microwave ovens, and for the convenient storage of plates and ingredients. Adande offers a range of standard size gantries to suit a variety of applications and cooking equipment weight loadings. Gantry requirements must be confirmed at time of order. Double Shelf Plate Gantries (G1) can be fitted to any solid worktop to help improve service efficiency. Plate Gantries are available for both rear and side engine prep stations, with each shelf being 250 mm deep. The bottom shelf is 450 mm above the worktop, with the top shelf 300 mm above that.. VCM2/CT STANDARD CASTORS 891 mm 0 kg VCM2/CW STANDARD CASTORS 900 mm 230 kg VCS2/CM2 PREP STATION & 1 SHELF GANTRY 900 mm 230 kg VC/CG1 VCR PREP STATION & PLATE GANTRY 900 mm 230 kg VCM2/SCT SMALL CASTORS 870 mm 0 kg VCM2/RW ROLLERS & FEET 856 mm 225 kg VCS2/CM3 1 SHELF GANTRY R/H EXTENSION 900 mm 230 kg VCS2/CG1 VCS PREP STATION & PLATE GANTRY 900 mm 230 kg VCM2/RT ROLLERS & FEET 847 mm 0 kg VCM2/SRW SMALL ROLLERS & FEET 846 mm 225 kg VCS2/CM5 1 SHELF GANTRY L/H EXTENSION 900 mm 230 kg BLAST CHILL AVAILABLE ON VCS UNIT ONLY VCM2/SRT SMALL ROLLERS & FEET 837 mm 0 kg VCM1/FBW FLAT BASE - SOLID WORKTOP 428 mm 285 kg VCS2/CG1 VCS PREP STATION & PLATE GANTRY 900 mm 230 kg VCM1/FBT FLAT BASE - COVER TOP 419 mm 0 kg VCM2/FBT FLAT BASE - COVER TOP 816 mm 0 kg VCM2/FBW FLAT BASE - SOLID WORKTOP 825 mm 225 kg VCM2/SCW SMALL CASTORS 879 MM 0 kg 10 11

BUILT IN FLAT BASE CASSETTE UNITS THREE DRAWER STORAGE UNITS CASSETTE UNIT VCM - MATCHBOX CASSETTE UNIT Single drawer units with Flat Bases (FB) are available for built-in custom fab applications.

level. These units are available with either solid worktops (W) or cover tops (T) providing a choice of finished heights, to best suit the design.

710 mm 1120 mm Two drawer units with Flat Bases (FB) are available for built-in custom fab applications.

The insulated drawers are easy to lift out for cleaning when empty.

7 BUILT IN FLAT BASE CASSETTE UNITS THREE DRAWER STORAGE UNITS CASSETTE UNIT VCM - MATCHBOX CASSETTE UNIT Single drawer units with Flat Bases (FB) are available for built-in custom fab applications. Side engine flat base units can be fitted, cassette style, into a cook range or under-counter, to suit those designs where the kitchen equipment is mounted on a plinth, raising everything above floor level. These units are available with either solid worktops (W) or cover tops (T) providing a choice of finished heights, to best suit the design. Rear engine flat base VCR units are only suitable for built-in applications where the airflow design allows for this spec of Adande unit to breathe efficiently - Price on Application only. 710 mm 1120 mm Two drawer units with Flat Bases (FB) are available for built-in custom fab applications. Three Drawer units are an ergonomic alternative to the traditional upright or wall cabinet, being ideal for chilled or frozen bulk food storage - available with cover tops (T) or solid worktops (W). The insulated drawers are easy to lift out for cleaning when empty. VCS1/FBT FLAT BASE & COVER TOP 419 mm 0 kg VCM1/FBT FLAT BASE & COVER TOP 419 mm 0 kg VCS3/CT STANDARD CASTORS & COVER TOP 1288 mm 0 kg VCR3/CT STANDARD CASTORS & COVER TOP 1288 mm 0 kg VCS1/FBW FLAT BASE & SOLID TOP 428 mm 285 kg VCM1/FBW FLAT BASE & SOLID TOP 428 mm 285 kg VCS3/CW STANDARD CASTORS & SOLID TOP 1297 mm 180 kg VCR3/CW STANDARD CASTORS & SOLID TOP 1297 mm 180 kg VCS2/FBT FLAT BASE & COVER TOP 816 mm 0 kg VCM2/FBT FLAT BASE & COVER TOP 816 mm 0 kg VCS2/FBW FLAT BASE & SOLID TOP 825 mm 225 kg VCM2/FBW FLAT BASE & SOLID TOP 825 mm 225 kg UNIT SIZES ARE EXACT - PLEASE ALLOW 2-4 MM IN ORDER TO FIT OUR EXACT SIZE IN 12 13

DRAWER MANAGEMENT SYSTEMS DRAWER CUSTOMISING OPTIONS RG RG RG CROSS - SECTION THROUGH BIN DD DT EW HS/ EW CO H1 US GN Pan Racks Gastronorm Pan Storage Drawer Dividers Drawer Bins

One GN Pan Rack (RG) caters for half the drawer - adequate for most organisational needs, leaving space in the other side of the drawer to store additional items.

The Adande Drawer caters for all depths of GN Pan from 200 mm down to 65 mm.

This works equally well, be it 2 pans 100 mm deep or, as in the main photo above, 3 x 65 mm deep pans (1/1 size) in a stack, filling half the area of the bin.

Drawer Dividers (DD) simply slot into the grooves in the plastic insulated drawer bin, and can be moved easily to compartmentalise the drawer for more efficient use.

With internal dimensions of 700w x 540d x 220h mm the Adande Drawer is designed to hold a wide variety of GN Pan combinations - see GN Storage info on this page.

left and right, and to a maximum of 150 mm at the back of the unit - as shown in the adjacent illustration.

Max 150 mm overhang B L R Provide dimensions L,R & B with order Can Openers (CO) can be fixed to the front left or right side of Adande units with solid worktops.

Levelling Castors To make it easier and safer to move Adande units, a pair of Grab Handles (H1) can be welded to any solid (W) or heat shield (HS) worktop.

Remote Monitoring 50 mm high stainless steel Upstands (US) can be fixed to the back of any standard VCS, VCR or VCC worktop.

The price of Adande Upstands is the same for solid (W) and heat shield (HS) worktops.

STEEL & POLYCARBONATE GN PANS AVAILABLE Drawer Locks (DL) can be fitted to any drawer unit in the Adande range.

8 DRAWER MANAGEMENT SYSTEMS DRAWER CUSTOMISING OPTIONS RG RG RG CROSS - SECTION THROUGH BIN DD DT EW HS/ EW CO H1 US GN Pan Racks Gastronorm Pan Storage Drawer Dividers Drawer Bins Extended Worktops Can Opener Grab Handles Worktop Upstands Gastronorm (GN) Pan Racks help chefs arrange and store ingredients to suit operational and menu requirements. One GN Pan Rack (RG) caters for half the drawer - adequate for most organisational needs, leaving space in the other side of the drawer to store additional items. Gastronorm Pans are not included with orders for GN Pan Racks, but on request, stainless steel, polycarbonate or polypropylene GN Pans can be supplied - Price on Application. The Adande Drawer caters for all depths of GN Pan from 200 mm down to 65 mm. When storing a variety of foods in smaller GN Pans, it makes sense to hold back-up stock of each item in the same size pan, stacked one on top of the other. This works equally well, be it 2 pans 100 mm deep or, as in the main photo above, 3 x 65 mm deep pans (1/1 size) in a stack, filling half the area of the bin. At only 83 litres capacity, the Adande Drawer holds a deceptively large volume because, unlike conventional cabinets, there is no requirement to leave air gaps between the items of food. Drawer Dividers (DD) simply slot into the grooves in the plastic insulated drawer bin, and can be moved easily to compartmentalise the drawer for more efficient use. Drawer Dividers can be supplied with new drawer units or ordered separately at a later date. Spare or replacement insulated plastic Drawer Bins (DT) are available, on request. With internal dimensions of 700w x 540d x 220h mm the Adande Drawer is designed to hold a wide variety of GN Pan combinations - see GN Storage info on this page. Drawer Locks Wire Baskets Bin Hygiene To create larger work surfaces or provide additional space on which to mount kitchen equipment, Adande worktops can be extended up to 200 mm to the left and right, and to a maximum of 150 mm at the back of the unit - as shown in the adjacent illustration. Extended solid (W) or heat shield (HS) worktops can be requested for all VCS and VCR units. Worktop extensions to the front are not possible. Max 150 mm overhang B L R Provide dimensions L,R & B with order Can Openers (CO) can be fixed to the front left or right side of Adande units with solid worktops. Requests for Can Openers should be confirmed at time of order. Levelling Castors To make it easier and safer to move Adande units, a pair of Grab Handles (H1) can be welded to any solid (W) or heat shield (HS) worktop. Requests for Grab Handles should be confirmed at time of order. Remote Monitoring 50 mm high stainless steel Upstands (US) can be fixed to the back of any standard VCS, VCR or VCC worktop. Longer (50 mm high) Upstands (EW/US) can be fitted to VCS and VCR units with extended solid (W) and heat shield (HS) worktops. The price of Adande Upstands is the same for solid (W) and heat shield (HS) worktops. Code RG DD B1 B2 DT DL N/A GN PAN RACK - HALF DRAWER DRAWER DIVIDER WIRE BASKET - HALF DEPTH, HALF AREA WIRE BASKET - FULL DEPTH, HALF AREA INSULATED DRAWER BIN DRAWER LOCK STAINLESS STEEL & POLYCARBONATE GN PANS AVAILABLE Drawer Locks (DL) can be fitted to any drawer unit in the Adande range. Drawer Locks must be requested at time of order, as they cannot be retrofitted at a later date. Wire Baskets (B1 & B2) are yet another way to help organise chilled and frozen bulk storage. Each basket fits half the plan area of the drawer, with Full Depth (B2-200 mm deep) and Half Depth (B1-100 mm deep) baskets being available. With the drawer fully open (pulls out ) the insulated plastic Drawer Bin can be lifted out for cleaning. Bins may be cleaned using ware wash equipment, so long as the water temperature does not exceed 85 C. Code EW HS/EW US EW/US H1 LC CO EXTENDED SOLID WORKTOPS EXTENDED HEAT SHIELD TOPS STANDARD WORKTOP UPSTANDS EXTENDED WORKTOP UPSTANDS PAIR OF WORKTOP GRAB HANDLES SET OF 4 LEVELLING CASTORS CAN OPENER Levelling Castors (LC) for uneven or sloping floors can be fitted to Adande units. LC castors allow a maximum of 10 mm height adjustment. Except in extreme cases this will be enough to ensure the Adande unit performs to specification. Access is required to all 4 castors to adjust the height. Where requested at time of order, Remote Temperature Monitoring devices can be fitted to all types of Adande Drawer unit during production - Price on Application

9 Performance Data SINGLE DRAWER kw/hr / 24 hrs Max Heat Heat Output (W) / 24 hrs Running Current - Amps HFC R404a *HC R600a TWO DRAWER kw/hr / 24 hrs Max Heat Heat Output (W) / 24 hrs Running Current - Amps (*HC=Hydrocarbon) HFC R404a , *HC R600a Technical Data Temperature Flexibility Operating Temperature Defrost Mains Supply Cord Casing Material Drawer Material Max Drawer Loading Average Unit Weights to set point by user to +43 C Automatic Electric 230 Vac 50 Hz also 60 Hz available 3 pin to IEC socket 2m coiled length. Commando & Euro plugs also available. Foodservice grade S/S ABS plastic, Zero ODP PU foam 40kg 115kg Single Drawer / 175kg Two Drawers / 235kg Three Drawers THREE DRAWER kw/hr / 24 hrs Max Heat Heat Output (W) / 24 hrs Running Current - Amps HFC R404a , *HC R600a , Climate Testing: Tested to Climate Standard 5 (40 C and 40% relative humidity) 1 DRAWER BLAST CHILL kw/hr / 24 hrs Max Heat Heat Output (W) / 24 hrs Running Current - Amps HFC R404a DRAWER BLAST CHILL kw/hr / 24 hrs Max Heat Heat Output (W) / 24 hrs Running Current - Amps HFC R404a , Remote Condensing - Adande side engine (VCS) units are available for Remote Condensing installations (Code:R6) supplied complete with controller, on/off solenoid valve and R404a thermostatic expansion valve. The prices for remote condensing VCS units are the same as for standard units. 16 Adande Refrigeration. Cumhuriyet Mah. Eski Hadimkoy Yolu No:29/A PK:34900 Buyukcekmece/ISTANBUL TR Tel: /11 eselcuk@oztiryakiler.com.tr

Adande Fundamentals 2, 3. Accessories 7. Technical Data / Performance 8

Adande Fundamentals 2, 3. Accessories 7. Technical Data / Performance 8 Contents Adande Fundamentals 2, 3 Refrigeration Systems Side Engine Units 4 Rear Engine Units 5 Compact Units 6 Pass-through Matchbox Units 6 Accessories 7 Technical Data / Performance 8 WA, NT & TAS -