Production Facility. Pneumatic Instrumentation Equipment Piping Equipment for Facilities. Air Piping Line. Water Piping Line

Size: px

Start display at page:

Download "Production Facility. Pneumatic Instrumentation Equipment Piping Equipment for Facilities. Air Piping Line. Water Piping Line"

Jonathan Clark
5 years ago
Views:

) Compressor Compressor Room Tank Dryer Flow Switch Flow Switch Water Piping Line Industrial

1 Production Facility Pneumatic Instrumentation Equipment Piping Equipment for Facilities Cooling Tower Air Piping Line Compressed air Inert gas (Nitrogen, Argon, etc.) Compressor Compressor Room Tank Dryer Flow Switch Flow Switch Water Piping Line Industrial water (Municipal water) Steam Deionized water/ Chemical liquids Clean Room Exhaust Cleaner for Clean Room NP-E07-9E

2 For Pneumatic Control in PA Process Automation Air Preparation Equipment Air Dryers Air Preparation s Compressor Detection Conversion Unit Pressure Sensors Flow Sensors Industrial s 1

Couplers Tubing Coil tube Stainless steel

IP67 Electro-pneumatic transducer Lock-up

3 FA Pressure Control Equipment Factory Automation Piping Material Fittings/S Couplers Tubing Coil tube Stainless steel series Double-layered tube Longer length tube Operation Unit Solenoid Valves Accessories Positioners Explosion-proof Specifications Intrinsically safe explosion-proof Relay Electro-Pneumatic Transducer Booster relay Lever type Explosion proof (Flameproof) NAMUR Standards IP67 Electro-pneumatic transducer Lock-up valve Rotary type Actuators Cylinder with Positioner In principle, SMC products cannot be used outdoors. 2

Compressed Air Line Air Tank Main Line Flow Switch Micro Mist Odor Removal (Deodorization) Compressor Aftercooler Refrigerated Air Dryer Mist Super Mist Pressure accumulation, Pulsation attenuation

5 to 37 kw Air flow capacity 35.3 to 201 scfm (1000 to 5700 L/min) Water-cooled Series HAW Applicable compressor 2.2 to 110 kw Air flow capacity 10.

L/min) 6A (1/8) to 4B flang Water Series AMG Dehumidification rate 99% Rated flow 106 to 424 scfm (300 to 12000 L/min) 6A to 50A (1/8 to 2) Flow Switch Series PF2A Measurement flow rate cfm (L/min) 0.

4 Compressed Air Line Air Tank Main Line Flow Switch Micro Mist Odor Removal (Deodorization) Compressor Aftercooler Refrigerated Air Dryer Mist Super Mist Pressure accumulation, Pulsation attenuation Air Tank Series AT Tank capacity 26.4 to 793 gal (100 to 3000 L) 15A (1/2) to 4B flange Aftercooler Cooling, Removing water roughly Air-cooled Series HAA Applicable compressor 7.5 to 37 kw Air flow capacity 35.3 to 201 scfm (1000 to 5700 L/min) Water-cooled Series HAW Applicable compressor 2.2 to 110 kw Air flow capacity 10.6 to 636 scfm (300 to L/min) Main Line Particle separation/ Water drop removal Flow rate detection Series AFF accuracy 3 µm (99% filtration efficiency) Rated flow 106 to 1589 scfm (300 to L/min) 6A (1/8) to 4B flang Water Series AMG Dehumidification rate 99% Rated flow 106 to 424 scfm (300 to L/min) 6A to 50A (1/8 to 2) Flow Switch Series PF2A Measurement flow rate cfm (L/min) 0.04 to 0.35 (1 to 10), 0.18 to 1.77 (5 to 50), 0.35 to 3.53 (10 to 100), 0.71 to 7.06 (20 to 200), 1.77 to 17.7 (50 to 500), 5.30 to 106 (150 to 3000) 10.6 to 212 (300 to 6000), 21.2 to 424 (600 to 12000) 6A to 50A (1/8 to 2) Dehumidification Refrigerated Air Dryer Series IDF 100FS/125FS/150FS Double energy saving function series Applicable compressor 100, 125, 150 kw Air flow capacity 664 to 953 scfm (18.8 to 27.0 m 3 /min) Series IDF 1E to 370D Applicable compressor 0.75 to 370 kw Air flow capacity 0.10 to 65.0 m 3 /min Series IDU 3E to 75E Applicable compressor 2.2 to 75 kw Air flow capacity 11.3 to 438 scfm (0.32 to 12.4 m 3 /min) Refrigerant: R134a (HFC) R407C (HFC) Ozone-depleting potential 0 Oil separation/ Mist Series AM accuracy 0.3 µm (99.9% filtration efficiency) Rated flow 106 to 424 scfm (300 to L/min) 6A to 50A (1/8 to 2) Micro Mist Super Mist Oil separation/ Series AMD accuracy (99.9% filtration efficiency) Rated flow 7.06 to 1412 scfm (200 to L/min) 6A (1/8) to 6B flange Oil separation/ Series AME accuracy (99.9% filtration efficiency) Rated flow 7.06 to 424 scfm (200 to L/min) 6A to 50A (1/8 to 2) Odor Removal Deodorization Series AMF accuracy (99.9% filtration efficiency) Rated flow 7.06 to 1412 scfm (200 to L/min) 6A (1/8) to 6B flange 3

Piping Equipment (Fittings and Tubing) Production Facility Pneumatic Instrumentation Equipment/Piping Equipment for Facilities S Couplers Series KK Air, Water ø3.

5/8 to 11/16 6A to 15A (1/8 to 1/2) S Couplers/Stainless Steel 304 Series KKA Air, Water 6A to 50A (1/8 to 11/2) One-touch Fittings Series KQ2 Air, Water ø2 to ø16 Metal One-touch

2 to ø16 Series KF Air, Steam (Brass sleeve) Air, Water (Resin sleeve) Brass sleeve Resin sleeve Self-align Fittings Series H,DL,L,LL Air Stainless Steel 316 One-touch Fittings Series

2 to ø16 Stainless Steel 316 Insert Fittings Series KFG2 Air, Water, Steam ø4 to ø16 Tubing Series T Fluoropolymer Fittings Series LQ Deionized water, Chemical liquids, etc.

5 Piping Equipment (Fittings and Tubing) Production Facility Pneumatic Instrumentation Equipment/Piping Equipment for Facilities S Couplers Series KK Air, Water ø3.2 to ø16 Applicable hose I.D./ O.D. 5/8 to 11/16 M5 to 25A (3/4) Series KK130 Air ø6 to ø12 Applicable hose I.D./ O.D. 5/8 to 11/16 6A to 15A (1/8 to 1/2) S Couplers/Stainless Steel 304 Series KKA Air, Water 6A to 50A (1/8 to 11/2) One-touch Fittings Series KQ2 Air, Water ø2 to ø16 Metal One-touch Fittings Insert Fittings Series KQB2 Air, Water ø3.2 to ø16 Series KF Air, Steam (Brass sleeve) Air, Water (Resin sleeve) Brass sleeve Resin sleeve Self-align Fittings Series H,DL,L,LL Air Stainless Steel 316 One-touch Fittings Series KQG2 Air, Water, Steam ø3.2 to ø16 Stainless Steel 316 Insert Fittings Series KFG2 Air, Water, Steam ø4 to ø16 Tubing Series T Fluoropolymer Fittings Series LQ Deionized water, Chemical liquids, etc. (Please contact SMC for details.) ø3 to ø25 Clean One-touch Fittings Series KP Air, N2, Water (Deionized water) (Please contact SMC for details.) Series T TS TU TUS TUH TPH,TPS TH TD TQ TL TLM Material Nylon Nylon (Soft Nylon) Polyurethane Polyurethane (Soft Polyurethane) Polyurethane (Hard polyurethane) Polyolefin-based resin FEP (Fluoropolymer) Modified PTFE (Soft Fluoropolymer) Outer layer: Special nylon resin Inner layer: Special fluoropolymer Super PFA PFA 500 m reel Fluid Air, Water Air, Water Note) Air, Water Air Air Air, N2, Water (Deionized water) Note) Air, Water, Inert gas Air, Water, Inert gas Air, Water, Inert gas, Solvent Deionized water, Chemical liquids, etc. Note) Air, Water, Inert gas O.D. ø4 to ø16 ø4 to ø16 ø2 to ø16 ø4 to ø19 ø2 to ø25 Length: Up to 500-meter rolls can be used, but the maximum roll length depends on tube materials and external diameter. Please consult SMC for details. (Made to Order) Note) Please contact SMC for details. 4

6 SMC Air Preparation System Class C D E F G H Solid particle Max. number of particles/1 m Not specified Not specified Not specified Not specified Not specified Particle diameter d µm 0.10 < d < d Not specified Not specified Not specified Not specified Not specified NA NA 1.0 < d Particle diameter µm NA Concentration mg/m 3 NA Class Moisture Pressure dew point At air pressure ( of 102 psi ) F Indication: The degree of quality is indicated with 1, 4 and 2 for systems with solid particle class 1, moisture class 4 and oil class 2. System no. Application Water drop removal air A Air blowing (Simple removal of particles) General pneumatic tools Dry air Used for the same applications as A, B when temperature drop in the middle of piping is large. Dry air General pneumatic equipment General painting Dry clean air High grade painting Sequence control Measurement device Instrumentation Drying and cleaning (Precision parts) Machine tools (Pneumatic bearing) Dry clean air Without refrigerated air dryer on the sub line Built-in with equipment (With machine tools, 3-D measurement device, etc.) Deodorant air Stirring, transporting, drying and packaging Food industry (Except direct blowing to foods) Low dew point clean air Drying electric and electronic parts Drying a filling tank Transporting powders Ozone generator Low temperature actuated equipment Low dew point clean air (For clean room) Blowing semiconductor parts in the clean room Moisture Dew point Atmospheric pressure dew point 42 F 102 psi Pressure dew point 104 F Atmospheric pressure dew point 6.8 to 9.4 F 102 psi Pressure dew point 59 to 37.4 F Atmospheric pressure dew point 22 to 76 F 102 psi Pressure dew point 21.2 to 43.6 F Impurity in compressed air Moisture content 7 g/m 3 (102 psi at 77 F) 1.7 g/m 3 to 0.8 g/m g/m 3 to 0.02 g/m 3 3 µm ing efficiency ( 99% ) 0.3 µm ing efficiency ( ) 99.9% ing efficiency ( ) 99.9% ing efficiency ( ) 99.99% Oil mist density (1) Max. 1 mg/m ppm Max. 0.1 mg/m ppm Max mg/m ppm Max mg/m ppm Max mg/m ppm Max mg/m ppm Cleanliness Particles with 0.3 µm or more: 100 or less/ft 3 (35 or less/ 10 L ) Particles with 0.1 µm or more: 0/6 L Oil Oil concentration mg/m Class Oil odor Quality grade as system (2) Yes No Yes No 3, -, - 3, 4, - 3, 5, - 3, 6, - 2, 4, 3 2, 5, 3 2, 6, 3 1, 4, 2 1, 5, 2 1, 6, 2 1, 4, 1 1, 5, 1 1, 6, 1 (3) 1, 1, 1 1, 2, 1 1, 3, 1 Description Representative model Flow capacity scfm Max. inlet air temperature (ing efficiency) Outlet oil mist concentration (Max.) (1) Outlet cleanliness Main Line AT HAA or HAW HAW HAA or HAW AFF Sub Line Air Tank Air Cooled Aftercooler Main Line Water Cooled Aftercooler Refrigerated Air Dryer AT HAA, HAW AFF IDF IDU Capacity 35 to to 793 gal 10 to to 1, to 2, to F 158 F 158 F, 356 F 140 F 122 F 176 F (Varies by model) 3 µm (99%) Pulsation attenuation, Cooling Accumulation, Cooling Select either Air Tank Air Cooled Separation, Aftercooler Class 2 Main Line or Water Cooled pressure Aftercooler vessel Not required when attached to air compressors. Applicable air compressors: 5.5 kw (7 hp) to 220 kw (300 hp) 1.4 F At inlet temperature 95 F Dehumidification Refrigerated Air Dryer Note 1) When the inlet oil mist density (compressed air density) is approximately 30 mg/m 3 or less. Note 2) This describes the grade of compressed air quality based on ISO8573-1: 2001 (JIS B8392-1: 2003), which is the maximum quality grade for the system. It varies, however, depending on the inlet air conditions. Note 3) Contact SMC since this can be manufactured as a special order (depending on the operating conditions). 5 Atmospheric pressure dew point [At inlet air pressure of 102 psi] Reciprocating air compressor Not required when attached to air compressors. Screw air compressor HAA Applicable air compressors: 7.5 kw (10 hp) to 37 kw (50 hp) Applicable air compressors: 2.2 kw (3 hp) to 110 kw (150 hp) Air tank is not required for rotary screw compressors since pulsation is small, but required when it is used to accumulate pressure. Required for reciprocating air compressors since carbon and tarry substances are generated at high temperatures. Applicable air compressors: 2.2 kw (3 hp) to 240 kw (320 hp) AFF IDF Outlet air pressure dew point 50 F (102 psi, at 95 F) Applicable air compressors: 0.75 kw (1 hp) to 370 kw (500 hp) Required even for screw compressors since the piping of the oil-free type is rusted easily. 1.4 F At inlet temperature 131 F Dehumidification Refrigerated Air Dryer (High inlet air temperature type) Outlet air pressure dew point 50 F (102 psi, at 95 F) Applicable air compressors: 2.2 kw (3 hp) to 75 kw (100 hp) IDU

7 Water Mist Heatless Air Dryer Micro Mist with Pre-filter Micro Mist Production Facility Pneumatic Instrumentation Equipment/Piping Equipment for Facilities Local line Membrane Air Dryer Super Mist AMG AM ID AMH AMD IDG AME AMF SFD SFA, SFB, SFC 2.65 to to424 3 to to to to to to to to to F 122 F 144 F 122 F, 131 F 122 F 144 F (Varies by model) Odor Removal Clean Air 113 F Clean Gas 176 F, 248 F (Varies by models) Water drop removal ratio 99% 0.3 µm (99.9%) (With 0.3 µm pre-filter) (99.9%) (99.9%) (99.99%) (99.99%) 1 mg/m 3 [ 0.8 ppm] 0.1 mg/m 3 [ 0.08 ppm] 0.01 mg/m 3 [ ppm] mg/m 3 [ ppm] Particles with 0.3 µm or more: 100 or less/ft 3 (35 or less/10 L ) Particles with 0.1 µm or more: 0/6 L 22 F 58 F At inlet temperature 35 C 5 F 4 F At inlet temperature 77 F 40 F 76 F At inlet temperature 77 F Water droplet separation Water AMG A B Separation, Mist AM AM With 0.3 µm pre-filter/ Integrated AM + AMD AM AM AM Dehumidification Heatless Air Dryer ID ID Separation, Micro Mist with Pre-filter AMH AMH IDG AME AMH Atmospheric pressure dew point 22 F, 58 F (102 psi, at 95 F) AMH AMH Separation, Micro Mist AMD AMD AMD AMD Dehumidification Membrane Air Dryer Atmospheric pressure dew point 5 F, 4 F (102 psi, at 77 F) Dehumidification Membrane Air Dryer IDG IDG Super Mist AME AME Atmospheric pressure dew point 40 F, 76 F (102 psi, at 77 F) AME With oil saturation indicator Deodorization Odor Removal AMF AMF Precision filtration Clean Air SFD Clean Gas SFA/SFB/SFC C D E F G H 6

Pneumatic Instrumentation Equipment Positioner Main Line Pressure Switch Flow Switch Serial Communication Valve Regulator Sanitary Valve Control Manifold with Supply Stop Valve Explosion-proof

6 to 1483 scfm (300 to 42000 L/min) 6A (1/8) to 4B flange Flow Switch Series PF2A Flow rate detection Measurement flow rate cfm(l/min) 0.04 to 0.35 (1 to 10), 0.18 to 1.77 (5 to 50), 0.35 to 3.

2 to 424 (600 to 12000) 6A to 50A (1/8 to 2) Pressure detection Pressure adjustment Particle separation/ Pressure Switch Series ISG Set pressure range 14.5 to 145 psi (0.1 to 1.

8 Pneumatic Instrumentation Equipment Positioner Main Line Pressure Switch Flow Switch Serial Communication Valve Regulator Sanitary Valve Control Manifold with Supply Stop Valve Explosion-proof Solenoid Valve NAMUR Standards Solenoid Valve Main Line Particle separation/ Series AFF accuracy 3 µm (95% filtered particle size) Rated flow 10.6 to 1483 scfm (300 to L/min) 6A (1/8) to 4B flange Flow Switch Series PF2A Flow rate detection Measurement flow rate cfm(l/min) 0.04 to 0.35 (1 to 10), 0.18 to 1.77 (5 to 50), 0.35 to 3.53 (10 to 100), 0.71 to 7.06 (20 to 200), 1.77 to 17.7 (50 to 500), 5.30 to 106 (150 to 3000) 10.6 to 212 (300 to 6000), 21.2 to 424 (600 to 12000) 6A to 50A (1/8 to 2) Pressure detection Pressure adjustment Particle separation/ Pressure Switch Series ISG Set pressure range 14.5 to 145 psi (0.1 to 1.0 MPa) 10A (3/8) Regulator Series 1301/IW accuracy 5 µm Set pressure range 2.9 to 73 psi (0.02 to 0.5 MPa) 8A (1/4) Actuator control Positioner Series IP Input current 4 to 20 madc 8A (1/4) Reduced wiring Reduced-wiring Fieldbus System (Serial Transmission System) Series SY/VQC DeviceNet TM EtherNet/IP TM CC-Link CompoNet TM PROFIBUS DP EtherCAT AS-Interface PROFINET CANopen Trademark DeviceNet is a trademark of ODVA. EtherNet/IP is a trademark of ODVA. CompoNet is a trademark of ODVA. EtherCAT is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. Manifold with Supply Stop Valve SS5Y3-X460, SS5Y5-X4601 SS5Y7-X460, SS5Y3-X2104 The supply pressure can be stopped individually. Solenoid valve can be replaced without shutting off the supply pressure in case of emergency. Explosion-proof Solenoid Valve 51-SY5000/7000/ VFE3000/ VPE500/700 NAMUR Standards Solenoid Valve VFN2120N-X23 VFN2120N-X36 Air operated type Solenoid valve for actuating a sanitary valve, etc. Conforming to NAMUR standards Double-layered Tube for Instrumentation Device (single-tubed/double-tubed) IN T0604 to T (X120, X121, X166) Double-layered tube with an external layer of vinyl chloride or polyolefin to protect the inner tube-double-tubed type (Color: black + black/black + white) and 300 m length are available. If you need a different no. of tubes, different colors or lengths over 300 mm, please contact our sales representatives. Outer layer: Vinyl chloride or Polyolefin-based resin Inner Special: Nylon 7

9 Production Facility Pneumatic Instrumentation Equipment/Piping Equipment for Facilities Industrial Water (Municipal Water) Line Pump Element Cooling Tower (Cooling building) Installing extra cooling towers can be troublesome. The HRSH (air-cooled refrigerated type) can be moved easily to wherever you need it, when you need it. Cooling water is supplied from the attached hose. <Water-cooled Refrigerated Type> Boiler <Air-cooled Refrigerated Type> Industrial Particle separation/ Series FG/FQ/FN Nominal filtration accuracy 0.5 to 120 µm Thread: 10A to 50A (3/8 to 2) Flange: 25A to 150A (1B to 6B) Pressure detection Pressure Switch Series ISE80 Rated pressure range 14.5 to 290 psi ( to MPa) M5, 6A (1/8), 8A (1/4) Flow Switch Series PF3W Flow rate detection Measurement flow rate cfm (L/min) 0.02 to 0.14 (0.5 to 4), 0.07 to 0.56 (2 to 16), 0.18 to 1.41 (5 to 40) 0.35 to 3.53 (10 to 100), 1.77 to 8.83 (50 to 250) Series IFW5 10A to 40A (3/8 to 1 1/2) Set flow rate range cfm (L/min) 0.04 to 0.35 (1 to 10) Series 0.35 to 0.71 (10 to 20) IF to 1.77 (20 to 50) Set flow rate range cfm (L/min) 0.49 to 2.12 (14 to 60) 3/8 to 3/ to 53.0(20 to 1500) 1.27 to 91.8 (36 to 2600) 3/4, 1 Flow rate control 2 Port Valve Series VX Orifice diameter ø3 to ø50 Thread: 6A to 50A (1/8 to 2) Flange: 32A to 50A Flow rate control 2 Port Valve (for Steam) Series VND Orifice diameter ø7 to ø50 Thread: 6A to 50A (1/8 to 2) Flange: 32F to 50F Cooling water temperature control Circulating Fluid Temperature Controller Thermo-cooler This equipment supplies temperature-controlled water to the heat source in a circular manner. Series HRSH Set temperature 41 to 95 F (5 to 35 C) Rc1 Cooling capacity (60Hz) 10 to 25 kw (air-cooled, water-cooled) Check Valve INA (Brass, Rc: 1/8) XTO-674- (Brass, Rc: 1/4 to 1/2) INA-14- (All stainless steel, Rc: 1/4 to 1/2) 8

Inert Gas Clean Dry Air Line Nitrogen N2 Bomb Clean Air Module Pressure adjustment Regulator Series SRH Set pressure range 7.3 to 102 psi (0.05 to 0.

10 Inert Gas Clean Dry Air Line Nitrogen N2 Bomb Clean Air Module Pressure adjustment Regulator Series SRH Set pressure range 7.3 to 102 psi (0.05 to 0.7 MPa) 6A to 15A (1/8 to 1/2) Series AP/AZ/AK Fluid control 2 Port Valve Series VX Orifice diameter ø3 to ø50 Thread: 6A to 50A (1/8 to 2) Flange: 32A to 50A Flow Switch Series PF2A Flow rate detection Measurement flow rate cfm (L/min) 0.04 to 0.35 (1 to 10), 0.18 to 1.77 (5 to 50), 0.35 to 3.53 (10 to 100), 0.71 to 7.06 (20 to 200), 1.77 to 17.7 (50 to 500), 5.30 to 106 (150 to 3000) 10.6 to 212 (300 to 6000), 21.2 to 424 (600 to 12000) 6A to 50A (1/8 to 2) Pressure detection Pressure Switch Series ISE Rated pressure range 14.5 to 145 psi ( to MPa) M5, 6A (1/8), 8A (1/4) Clean Gas Clean Air Module Particle separation / Series SF accuracy 8A to 10A (1/4 to 3/8) Modularization Series LLB A flow switch, regulator, 2 port valve, restrictor, and filter have been combined into a single unit. Easily obtains clean air. accuracy 8A to 10A (1/4 to 3/8) Piping Equipment Stainless Steel 316 Fittings: Series KQG2/KFG2 Clean One-touch Fittings: Series KP Fluoropolymer Tubing: Series TH/TL/TD/TLM/TQ Clean Tubing: Series TPH/TPS 9

Production Facility Pneumatic Instrumentation Equipment/Piping Equipment for Facilities Deionized Water/Chemical Liquids Line Liquid discharge Pump Process Pump: Series PAF Discharge flow rate 0.

59 cfm (1 to 45 L/min) Thread: (3/8, 3/4)/10A, 20A Tube extension: 1/2", 3/4" With nut: Connection fitting size 4 or 5 (LQ1, LQ3) Pressure adjustment Regulator Series SRF Integral fitting: Applicable

11 Production Facility Pneumatic Instrumentation Equipment/Piping Equipment for Facilities Deionized Water/Chemical Liquids Line Liquid discharge Pump Process Pump: Series PAF Discharge flow rate 0.04 to 1.59 cfm (1 to 45 L/min) Thread: (3/8, 3/4)/10A, 20A Tube extension: 1/2", 3/4" With nut: Connection fitting size 4 or 5 (LQ1, LQ3) Pressure adjustment Regulator Series SRF Integral fitting: Applicable tubing O.D. ø4 to ø19 Tube extension: 1/4" to 3/4" Set pressure range 2.9 to 58 psi (0.02 to 0.4 MPa) Flow rate detection Flow Switch Series PF2D Measurement flow rate 0.01 to 1.14 cfm (0.4 to 40 L/min) Tube extension: 3/8" to 3/4" Liquid discharge 2 Port Valve Series LV Thread: (1/8 to 1)/6A to 25A Integral fitting: Applicable tubing O.D. ø3 to ø25 Tube extension: ø3 to ø25 Orifice diameter ø2 to ø22 Series PF3W Measurement flow rate cfm (L/min) 0.35 to 3.53 (10 to 100), 1.06 to 8.83 (30 to 250) PVC tubing O.D. 25A, 30A Series LVP 16A, 20A, 25A Orifice diameter ø16, ø22 Flow rate adjustment Restrictor Needle Valve: Series LVN Integral fitting: Applicable tubing O.D. Orifice diameter ø4.4 to ø10 Piping Equipment Fluoropolymer Fittings: Series LQ Fluoropolymer Tubing: Series TH/TL/TD/TLM/TQ Quick Drain Valve: Series LVW ø32 to ø89 (25A to 80A) 10

12 Global Manufacturing, Distribution and Service Network Worldwide Subsidiaries America North & South America U.S.A. SMC Corporation of America CANADA SMC Pneumatics (Canada) Ltd. MEXICO SMC Corporation(México), S.A. de C.V. BRAZIL SMC Pneumãticos do Brasil Ltda. CHILE SMC Pneumatics (Chile) S.A. COLOMBIA SMC Colombia Sucursal de SMC Chile S.A. ARGENTINA SMC Argentina S.A. BOLIVIA SMC Pneumatics Bolivia S.r.l. VENEZUELA SMC Neumatica Venezuela S.A. PERU (Distributor) IMPECO Automatización Industrial S.A.C. ECUADOR (Distributor) ASSISTECH CIA. LTDA. Asia/Oceania CHINA SMC(China)Co.,Ltd. CHINA SMC Pneumatics (Guangzhou) Ltd. HONG KONG SMC Pneumatics(Hong Kong)Ltd. TAIWAN SMC Pneumatics(Taiwan)Co.,Ltd. KOREA SMC Pneumatics Korea Co., Ltd. SINGAPORE SMC Pneumatics(S.E.A.)Pte.Ltd. MALAYSIA SMC Pneumatics(S.E.A.)Sdn.Bhd. THAILAND SMC (Thailand) Ltd. PHILIPPINES Shoketsu SMC Corporation INDIA SMC Pneumatics(India)Pvt.Ltd. ISRAEL (Distributor) Baccara Geva A.C.S. Ltd. INDONESIA (Distributor) PT. Sinar Mutiara Cemerlang VIETNAM (Distributor) Dy Dan Trading Co.,Ltd. PAKISTAN (Distributor) Jubilee Corporation Asia/Oceania SRI LANKA (Distributor) Electro-Serv(Pvt.)Ltd. IRAN (Distributor) Abzarchian Co. Ltd. U.A.E. (Distributor) Machinery People Trading Co. L.L.C. KUWAIT (Distributor) Esco Kuwait Equip & Petroleum App. Est. SAUDI ARABIA (Distributor) Assaggaff Trading Est. BAHRAIN (Distributor) Mohammed Jalal & Sons W.L.L. Technical & Automative Services SYRIA (Distributor) Miak Corporation JORDAN (Distributor) Atafawok Trading Est. BANGLADESH (Distributor) Chemie International AUSTRALIA SMC Pneumatics(Australia)Pty.Ltd. NEW ZEALAND SMC Pneumatics(N.Z.)Ltd. JAPAN SMC Corporation Europe/Africa GERMANY SMC Pneumatik GmbH SWITZERLAND SMC Pneumatik AG U.K. SMC Pneumatics (U.K.) Ltd. FRANCE SMC Pneumatique SA SPAIN / PORTUGAL SMC España S.A. ITALY SMC Italia S.p.A. GREECE SMC HELLAS E.P.E IRELAND SMC Pneumatics (Ireland) Ltd. NETHERLANDS (Associated company) SMC Pneumatics BV BELGIUM (Associated company) SMC Pneumatics N.V./S.A. DENMARK SMC Pneumatik A/S AUSTRIA SMC Pneumatik GmbH (Austria) Europe/Africa CZECH REPUBLIC SMC Industrial Automation CZ s.r.o. HUNGARY SMC Hungary Ipari Automatizálási Kft. POLAND SMC Industrial Automation Polska Sp. z o.o. SLOVAKIA SMC Priemyselná Automatizácia Spol s.r.o. SLOVENIA SMC Industrijska Avtomatika d.o.o. BULGARIA SMC Industrial Automation Bulgaria EOOD CROATIA SMC Industrijska Automatika d.o.o. BOSNIA AND HERZEGOVINA(Distributor) A.M. Pneumatik d.o.o. SERBIA(Distributor) Best Pneumatics d.o.o. UKRAINE(Distributor) PNEUMOTEC Corp. FINLAND SMC Pneumatics Finland Oy NORWAY SMC Pneumatics Norway AS SWEDEN SMC Pneumatics Sweden AB ESTONIA SMC Pneumatics Estonia Oü LATVIA SMC Pneumatics Latvia SIA LITHUANIA(LIETUVA) UAB SMC Pneumatics ROMANIA SMC Romania S.r.l. RUSSIA SMC Pneumatik LLC. KAZAKHSTAN SMC Kazakhstan, LLC. TURKEY (Distributor) Entek Pnömatik Sanayi ve. Ticaret Şirketi MOROCCO (Distributor) Soraflex TUNISIA (Distributor) Byms EGYPT (Distributor) Saadani Trading & Industrial Services NIGERIA (Distributor) Faraday Engineering Company Ltd. SOUTH AFRICA (Distributor) Hyflo Southern Africa (Pty.) Ltd. U.S. & Canadian Sales Offices WEST Austin Dallas Los Angeles Phoenix Portland San Francisco Vancouver CENTRAL Chicago Cincinnati Cleveland Detroit Indianapolis Milwaukee Minneapolis St. Louis Toronto Windsor EAST Atlanta Birmingham Boston Charlotte Nashville New Jersey Rochester Tampa Montreal Vancouver Livermore Sales Branches Regional Distribution Centers Central warehouse SMC Corporation of America SMC Blvd., Noblesville, IN SMC Pneumatics (Canada) Ltd. (800) SMC.SMC1 ( ) sales@smcusa.com For International inquiries: SMC Corporation of America, All Rights Reserved. RX-RRD-5M All reasonable efforts to ensure the accuracy of the information detailed in this catalog were made at the time of publishing. However, SMC can in no way warrant the information herein contained as specifications are subject to change without notice. Austin Chicago Indianapolis Toronto Detroit Atlanta Montreal Boston

76% reduced. 25% reduced. by up to 76% Saves energy. Refrigerated Air Dryer. New. Series IDF100FS/125FS/150FS

76% reduced. 25% reduced. by up to 76% Saves energy. Refrigerated Air Dryer. New. Series IDF100FS/125FS/150FS Refrigerated Air Dryer Double energy saving function series Second re-heater Digital scroll compressor Stainless steel heat exchanger Ozone depletion potential ZERO refrigerant New RoHS Saves energy by