CONTAINERS AND CABINETS WILL KEEP ANYTHING IN ORDER

Transcription

1 . CONINERS ND CBINES CONINERS ND CBINES WILL KEEP NYHING IN ORDER DIRECORY CHPER PROFI Container. LC Container (9HE).6 PROFI Container (HE).8 PROFI Pedestal Container (3HE).9 PROFI Short Container. PROFI Narrow Container and Wide Container. PC Container. PROFI Separator and Partitioner.3 PROFI Filing Frame and Drawer Insert; Key and Lock for PROFI Container ESY Container. ESY Container: Mobile and Suspended.6 ESY Pedestal Container.7 op Plate and Base for ESY Pedestal Container; ESY Drawer.8 ESY Suspended PC Container; Mobile Set for ESY Container; Small Parts ray for ESY Container.9 ESY Drawer Inserts; Spare Parts for ESY Container Sheet Steel Container. Sheet Steel Container: Mobile and Suspended. Sheet Steel Pedestal Container.3 Sheet Steel Short Container Set of Separators for Sheet Steel Drawer. Drawer Insert with ools Cabinets.9 Base: Wood and Sheet Steel.3 Cabinet with Hinged Doors.3 Compartment Cabinet and Sliding Door Cabinet.3 Fully and Partially Glass Doors.33 Cabinet with Shutter Doors and Shelf.3 Intermediate Wall and Corner Cabinet.3 Cabinet Shelf Board: Wood and Sheet Steel.37 Book End; extendable Shelf Board.37 Wardrobe Rail.38 Shelf Board for raining Systems; raining Boxes ableau; Cabinet Cord Holder.39 Integrated Drawer and Filing Frame. Drawer Cabinet. Separators and Dividers for Drawer Cabinets. File Cabinet.3 Compensation Board and Pull-Out ray Board. Cabinet Ladder System.6 Sheet Steel Drawer Cabinet.7 Sltotted Partitions, Partitions and Separators for Steel Sheet Drawer Cabinets.8 Sheet Steel Cabinets with Hinged Doors technical details are subject to change without notice.

2 . CONINERS ND CBINES ELEGN ND QUIE FUNCIONL he Design version of our PROFI container is quite elegant due to the hidden handle bar. Unlike other common spring-based push-to-open sulutions, this drawers are easy to open if they are heavily loaded and the content got stuck. bsolutly nice are the ergonomically bevelled front edges. Special easy running casters offer high tilt protection.. technical details are subject to change without notice

3 . CONINERS ND CBINES technical details are subject to change without notice.3

4 . CONINERS ND CBINES LC CONINER (9HE) F Form Standard Solid body made of melamine resin covered 9mm chipboard with mm PP plastic edge. Solid top - and bottom plate for a maximum of stability. Robust ORG metal drawer with single-drawer-blocking-system (load capacity: kg). Front in HE Raster (HE = mm) with nickel plated metal handle. Central locking (master-key-system) with two keys. Mobile container with metal base and four steerable twin-casters (diameter: mm), two with brakes. Suspended container with top plate and mounting holes. Inner dimensions of drawer: width: 3mm / depth: 9mm (D: 8/68) / 69mm (D: 78) height: 8mm. Dimensions: width: mm; depth: 8 / 68 / 78mm; height: 7mm (mobile) / 9mm (suspended). F Form Design he Design version differs from the Standard container in following issues: handle-free bevelled front panel both sides with vertical grip strip mobile container with 7mm design twin-casters Design version -- ergonomically bevelled front panel -- nicely shaped and easy running 7mm twin-casters -- elegant handle-free design. technical details are subject to change without notice

5 . CONINERS ND CBINES Version ESD Version Body made of surface and volume conductive chipboard, conductive metal drawers with conductive bevelled front panel and steerable twin-casters. Mobile Container Suspended Container O op drawer with lock and small part tray pencil drawer with lock HE Small Part ray Pencil Drawer E Features Drawers in HE raster (HE = mm) with door instead of drawers 3HE + 6HE with Small Part ray 3HE + HE + HE with Small Part ray 3HE + HE+ HE + HE with Small Part ray Cabinet with right hinged Door HE + HE + 6HE with Pencil Drawer HE + HE + 3HE + 3HE with Pencil Drawer HE +HE + HE + HE + HE with Pencil Drawer Container with Door, left hinged LC Container 3. E O. F 3 Version E Features O op Drawer F ype Suspended Container x Drawers 3HE with lock and small 8mm Standard Mobile Container 3 3x Drawers part tray 68mm Design 3 ESD Suspended x Drawers 6 HE pencil drawer + HE (only suspended) ESD Mobile Door, left hinges drawer 78mm Door, right hinges Option full extension (per drawer) load: kg Option drawer closing with SoftStop (per drawer) Option handle powder coated according to RL-No. (per drawer) technical details are subject to change without notice.

6 . CONINERS ND CBINES PROFI CONINER (HE) Solid body made of melamine resin covered 9mm chipboard with mm PP plastic edge. Robust ORG metal drawer with single-drawerblocking-system in HE raster (HE = mm). Pencil drawer HE with central locking (master-keysystem) and two keys. Mobile container with metal base and four steerable twin-casters, two with brakes. Pedestal containers with four glides. Inner dimensions of drawers: width: 37mm depth: 9mm (D: 8/68) / 69mm (D: 78) height: Dimensions: width: depth: height: 8mm mm 8 / 68 / 78mm 67mm (mobile container) 6mm (pedestal container) 8mm (suspended container) Standard Mobile Container Drawers: Ballbearing roller guides with telescopic extension, load capacity: kg; optional with telescopic full extension (V) load capacity: kg. Organizable with separators, dividers and drawer inserts. Self-closing drawer runners. Single-drawer-blocking-system. Ergonomically bevelled front panel made of 9mm melamine resin covered chipboard and nickel-plated metal handles. Optionally powder coated according to RL-No. Design Pedestal Container BiColor Design Version: Handle-free bevelled front panel. Both sides vertical grip strip. Mobile container with 7mm design twin-casters. Standard Suspended Container Container -- absolutly solid connection to casters due to metal base -- key with ergonomically foldable handle.6 technical details are subject to change without notice

7 . CONINERS ND CBINES Version: ESD Version Body made of surface and volume conductive chipboard, conductive metal drawers with conductive bevelled front panel and steerable twin-casters. Mobile Container Pedestal Container Suspended Container EE Features (drawers): in HE raster (HE = mm) containers with doors are not available with pencil drawers 3 x HE + x 6HE V 33 x HE + x HE 3x HE + x HE 3 x HE + x 3HE x HE Door, left hinged Door, right hinged PROFI Container (HE) 3. EE. 3 usführung Version EE Einteilung Features ype Rollcontainer Mobile Container 3 x HE + x 6HE V 8mm Standard 7 Standcontainer Pedestal Container 33 x HE + x HE 68mm Design Hängecontainer Suspended Container 3x HE + x HE (only suspended) ESD Rollcontainer Mobile 3 x HE + x 3HE 78mm 68 ESD Standcontainer Pedestal x HE 3 ESD Hängecontainer Suspended Door, left hinged (with shelf board) Door, right hinged (with shelf board) Option full extension (per drawer) load: kg Option drawer closing with SoftStop (per drawer) Option handle powder coated according to RL-No. (per drawer) Option full extension extensional length: 3mm (depth: 8) 73mm (depth: 78) load capacity: kg over extension: mm Option SoftStop self closing drawers with damping cylinders technical details are subject to change without notice.7

8 . CONINERS ND CBINES PROFI PEDESL CONINER (3HE) See the details on page.6. op plate for side standing containers in chapter. Width: mm : 8 / 78mm. V ype: Under Bench Side Standing with four glides base with levelling feet height: 7mm height: 7mm EE Features (drawers) in HE raster (HE = mm) Containers with door have no pencil drawer but shelf board PROFI Pedestal Container (3HE) 3. EE.. F V 3 Version EE Features F Form V ype Standard x 6HE V 8mm Standard Under Bench 6 ESD 3 x 3HE + x 6HE V 78mm Design Side Standing 3x HE + x 6HE V 3 xhe + x HE x 3HE 3 3x HE + x 3 HE x HE + x HE Options 6 6x HE Option full extension (per drawer) load: kg Door, left hinged Option drawer closing with SoftStop (per drawer) Door, right hinged Option handle powder coated according to RL-No. (per drawer).8 technical details are subject to change without notice

9 . CONINERS ND CBINES PROFI SHOR CONINER See the details on page.6. Width: mm : 8 / 78mm. EE Features (drawers) in HE raster (HE = mm) Containers with door have no pencil drawer but shelf board 3 / 3 PROFI Short Container 3. EE. F 3 Version EE Features F ype Standard x Drawer, height: 7mm 8mm Standard 3 ESD 3 x Drawers, height: 9mm 68mm Design 3 Door, left hinged, height: 3mm 78mm Door, right hinged, height: 3mm x HE Pencil Drawer + x HE+ x 3HE HE Extendable ray with V + x HE + x 3HE Options Option full extension (per drawer), load: kg Option drawer closing with SoftStop (per drawer) HE extendable tray technical details are subject to change without notice.9

10 . CONINERS ND CBINES PROFI NRROW CONINER vailable with all drawer features, not available in ESD. Load capacity: kg. Width: 3mm. Option Narrow Container xxx.xxx. PROFI WIDE CONINER ll drawers with full extension and stationary locking panel, without pencil drawer. Load capacity: 7kg. Width: 6mm. Separators and dividers see page.. Option Wide Container xxx.xxx. PROFI Wide Container PROFI Narrow Container. technical details are subject to change without notice

11 . CONINERS ND CBINES PC CONINER Solid body made of 9mm thick melamine resin covered chipboard with mm PP plastic edge. Side with detachable inspection flap with lock. Rear wall with cable access. Suspended container with mounting bores in the top. Pedestal container with plastic glides. Width: 7mm : 8 / 68 / 78mm Height: 8mm (suspended container) 7mm (pedestal container) PC Container 3. S. 3 ype S Bench Side Suspended 3 left 8mm Pedestal right 68mm 78mm DOOR FOR PC CONINER Metal hinges and lock with two keys (master key system). Metal handle or vertical grip strip (design). Door for PC Container 3.3 M. F 3 ype M Material F Form Suspended 8 Wood door with Standard Pedestal bevelled front Design 9 6mm Safety Glass technical details are subject to change without notice.

12 . CONINERS ND CBINES PROFI SEPROR Made of powder coated double sheet steel. Sides with latches and bores for the acception of dividers. Dimensions: x 77mm (DxH). PROFI Separator for Standard Container (W: 37mm) for Narrow Container (W: 7mm) PROFI DIVIDER Made of powder coated sheet steel. Sides with latches. Height: 77mm. PROFI Divider (3mm) (mm) 6 (mm) 7 (mm) PROFI UNIVERSL PRIION consisting of: x Separator x Divider x Divider 7 PROFI Universal Partition PROFI PRIION 78MM consisting of: x Separator x Divider 6 x Divider PROFI Partition 78mm PROFI PRIION 8MM consisting of: x Separator x Divider x Divider 6 x Divider 7 PROFI Partition 8mm technical details are subject to change without notice

13 . CONINERS ND CBINES PROFI FILING FRME DIN Plugable steel fi ling frame. Suitable for 6HE drawers. PROFI Filing Frame DIN DIN Filing Frame for depth: 7mm DIN Filing Frame for depth: 77mm Bridge for Filing Frame PROFI DRWER INSER made of grey deep-drawn plastics. ype : Dimensions: 38 x 7 x mm (WxDxH) x Compartments: x 7mm x Compartments: 6 x 7mm ype : Dimensions: 38 x 9 x mm (WxDxH) 3x Compartments: 88 x mm ype 3: Dimensions: 38 x x mm (WxDxH) x Compartments: x 9mm x Compartments: 7 x 9mm ype : Dimensions: 38 x x mm (WxDxH) x Compartments: 73 x 9mm PROFI Drawer Insert ype (depth: 7 / 8 compartments) ype (depth: 9 / 3 compartments) ype 3 (depth: / compartments) ype (depth: / compartments) PROFI DRWER INSER ND MERIL RY Drawer inserts made of light grey plastics. Dimensions: 33 x 36 x 3mm (WxDxH). Material trays made of plastics, according to customers choice more material trays can be fi t together. Dimension: 38 x x 3mm (WxDxH). PROFI Drawer Insert and Material ray Drawer Insert with Compartments Insert with DIN size and 3 small compartments Material ray SPRE PRS FOR PROFI CONINER Master -, group - or single key systems are possible. For changing the lock, a service key is needed. Spare Parts for PROFI Container Spare Key (please state lock No.) Lock with two Keys Master Key for Locking System 7 Service Key for Locking System 7 technical details are subject to change without notice.3

14 . CONINERS ND CBINES UNBELIVBLE, EVERYHING FIS IN HERE Characteristic for the containers of our ESY program is the ergonomic handle strip as well as the enormous storage capacity. Like the PROFI containers, all ESY containers are also available in mobile, suspended and pedestal form.. technical details are subject to change without notice

15 . CONINERS ND CBINES ESY MOBILE ND SUSPENDED CONINER Solid body made of melamine resin covered chipboard. Central lock (master-key-system) with two keys. Extendable tray. Very spacious wooden drawers on roller guides. Drawer fronts with whole width handle strip (front height in mm). Inner dimension of drawer: width: 6mm / depth: 6mm. Dimensions: Width: : mm / depth: 6mm 68mm (suspended container) mm (mobile container) Mobile Container: 3mm top plate. Four steerable casters (dimensions: 7mm), two with brakes. ype: Mobile Container Suspended Container EEE Features (drawers) in mm: x + x 3 x 6 x + x 86 V 3x 96 + x 86 x 9 no extension tray door, left hinged door, right hinged drawer and door, left hinged drawer and door, right hinged ESY Mobile and Suspended Container 3. EEE. F ype EEE Features F Colour Mobile Container 3 x + x 3 Door, left hinged pebble / orange Suspended x 6 Door, right hinged light grey Container 3 x + x 86 V Drawer and Door, left hinged 3x 96 + x 86 Drawer and Door, right hinged x 9 technical details are subject to change without notice.

16 . CONINERS ND CBINES ESY PEDESL CONINER Solid body made of melamine resin covered chipboard. Central lock (master-key-system) with two keys. Extendable tray. Very spacious wooden drawers on roller guides. Drawer fronts with whole width handle strip (front height in mm). Dimensions: x 6 x 69mm (WxDxH). Base with glides. EEE Features (drawers) in mm: x 9 + x 33 x 9 + x 6 + x 33 x 9 + x 7x 9 door, left hinged door, right hinged ESY Pedestal Container 6. EEE. F EEE Features F Colour x 9 + x 33 6 x 9 + x Door, left hinged pepple / orange x 9+ x 6 + x x 9 Door, right hinged light grey.6 technical details are subject to change without notice

17 . CONINERS ND CBINES OPION OP PLE FOR ESY PEDESL CONINER 3mm thick melamine resin covered bench top with 3mm PP plastic edge. Dimensions: x 6 x 3mm (WxDxH). Option op Plate for ESY Pedestal Container light grey pepple OPION BSE FOR ESY PEDESL CONINER Sorrounding wood frame with hidden metal levellers, adjustable by mounting bores in container bottom. Regular bench height of 78mm due to base and 3mm top plate. Dimensions: x 6 x 6mm (WxDxH). Option Base for ESY Pedestal Container orange light grey pepple ESY DRWER Body made of melamine resin covered chipboard. op with spacer stip for suspended installation. Central lock (master-key-system) with two keys. Very spacious wooden drawer on roller guides. Drawer front with whole width handle strip (front height 9mm). Dimensions: x 6 x mm (WxDxH). ESY Drawer.... pepple / orange light grey technical details are subject to change without notice.7

18 . CONINERS ND CBINES ESY PC CONINER, SUSPENDED Solid body made of melamine resin covered chipboard. Rear side with cable access. Dimensions: 7 x 6 x mm (WxDxH). ESY PC Container, suspended orange light grey pepple DOOR FOR ESY PC CONINER, SUSPENDED Metal hinges and lock with two keys (master-key-system). Door for ESY PC Container, suspended light grey with handle strip and lock pepple with handle strip and lock 6mm safety glass with handle and lock MOBILE SE FOR ESY CONINER o convert a suspended container into a mobile container. Four steerable casters (diameter: 7mm), two with brakes. op plate 3mm. Mobile Set for ESY Container light grey pepple SMLL PRS RY FOR ESY o be placed on the extendable tray. Dimensions: 76 x 76mm (WxD). Small Parts ray for ESY Container technical details are subject to change without notice

19 . CONINERS ND CBINES ESY DRWER INSER Made of deep-drawn grey plastics. Dimensions: 6 x 6mm (WxD) / 9..6 (without tools) / 9..7 (without tools) ESY Drawer Insert for Mechanical ools (-pcs.) x 9..8 for hera raining Boxes 9.. x + x Set with Electric ools 7-pcs. 9.. for Small Parts Set with Mechanic ools 39-pcs for Electric ools SPRE PRS FOR ESY CONINER Master -, group - or single key systems are possible. he lock is installed in the side wall of the container and could be replaced by removing the laminated spring. Spare Parts for ESY Container Spare Key for Lock System M7, M7 or M78 (please state lock No.) Lock with two Keys Master Key for Locking System M7/7 Master Key for Locking System M78 technical details are subject to change without notice.9

20 . CONINERS ND CBINES NO COMPROMISSES HIS SNDS LL BURDENS You need a container for really heavy burdens? Be on the safe side with this sheet steel containers. For example, if you would like to store heavy tool at your workbench. We even offer the right partitions, so your drawers are always well organized and you get exactly the tool you are searching for on the first try. ll drawers are with solid grip handles.. technical details are subject to change without notice

21 . CONINERS ND CBINES SHEE SEEL MOBILE ND SUSPENDED CONINERS Closed metal housing with durable light grey powder coating. Sheet steel drawers with full extension, load: 7kg. Drawer front in mm, with whole width handle strip (lable holder). Side panels of the drawers are equal to drawer front, with slots in 7mm raster for the acceptance of separators. Drawer blocking mechanism, prevents unintended opening of the drawers. he blocking mechanism could be removed, but is recommended for accident prevention of mobile containers. Replacable lock with two keys. Clear drawer height: mm. Inner dimension of drawer: Width: 36 / 9mm (at / 6mm) Width: 9 / 6mm (at 7 / 7mm). ESD Version: Conductive powder coating in grey (similar RL 736). Mobile Container with conductive steerable casters. F Form Mobile Container Lower side with steerable casters (diameter: 7mm), two with brakes. op with mm raised edges and grooved rubber mat. Height: 67mm. Suspended Container op with four mounting holes Height: 33mm. E Features (drawers): x + x + x x + x + x 3x + x 7 9x Sheet Steel Mobile and Suspended Container 9 F. B E. F Form B Width E Features Version Mobile Container mm 3 x + x x x 7mm Standard 3 Suspended 6mm x + x + x 7 7mm ESD Container 7 3x + x 7 9 9x technical details are subject to change without notice.

22 . CONINERS ND CBINES SHEE SEEL PEDESL CONINER Closed metal housing with durable light grey powder coating. Sheet steel drawers with full extension, load: 7kg. Drawer front in mm, with whole width handle strip (lable holder). Drawer blocking mechanism, prevents unintended opening of the drawers. he blocking mechanism could be removed, but is recommended for accident prevention of mobile containers. Replacable lock with two keys. Inner drawer dimension: Width: 36 / 9mm (at / 6mm) Width: 9 /6mm (at 7 / 7mm). Clear drawer height: 6mm. Height: 7mm. ESD Version: Conductive powder coating in grey (similar RL 736). EE Features (drawers): x 7 + x + x 3 6x 8x 7 7x + x 7 + x x Sheet Steel Pedestal Container 9. B EE. B Width EE Features Version mm x 7 + x + x 3 7mm Standard 6mm 6 6x 7 7mm ESD 8 8x 7 7x + x 7 + x x BSE FOR SHEE SEEL PEDESL CONINER he base is for height adaption, so in combination with a 3mm bench top the regular height of 78mm is avieved. Sheet steel in black coating. Height: mm. Base for Sheet Steel Pedestal Container 9. B. B Width Version mm 7mm Standard 6mm 7 7mm ESD. technical details are subject to change without notice

23 . CONINERS ND CBINES SHEE SEEL SMLL CONINER See the details on page.. Clear drawer height: mm. Height: 83mm. EE Freatures (drawers): x + x x + x 7 x Sheet Steel Small Container 9. B EE. B Width EE Features Version mm x + x 7mm Standard 6mm 3 x + x 7 7 7mm ESD x PRIION SE FOR SHEE SEEL DRWER Sets of separators and dividers in 7mm Raster (7mm = x E). Separators (SW) and dividers (B) made of sheet steel. Suitable for the different container widths, - depths and drawer heights. Separators (SW) Dividers (B) Partition Set for Sheet Steel Drawers Width x x 7mm x 7mm 6 x 7mm 6 x 7mm Partition Set x SW (7E) + x B (9E) x SW (36E) + 9x B (6E) x SW (7E) + 6x B (9E) x SW (36E) + 3x B (9E) front height: mm front height: : 7mm front height: : mm front height: : mm technical details are subject to change without notice.3

24 . CONINERS ND CBINES PLSIC BIN FOR SHEE SEEL DRWER Set of plastic bins made of polysyrol plastic (red). ESD made of conductive polypropylen plastic (black). Suitable for the different container widths, - depths and drawer heights. ESD version on request! standard version ESD version Plastic Bin for Sheet Steel Drawer Width x x 7mm x 7mm 6 x 7mm 6 x 7mm Plastic Bin Set 6x 7 x 7 + x x 7 x 7 x 7 + x x 7 x 7 x 7 + 6x x 7 x x 7 + 6x x front height: mm front height: 7mm front height: mm OOL SE COMBINION WRENCH Foam insert, cutable ( mm). Set of combination wrench (, ). Set of Combination Wrenches, 9-pcs OOL SE LLEN WRENCH Foam insert, cutable ( mm). Set of allen wrench. Screwdriver-short. Set of llen Wrenches, 3-pcs OOL SE HMMER Foam insert, cutable ( mm). Nonrebound plastic hammer. Machinist hammer. Set of Hammers, -pcs technical details are subject to change without notice

25 . CONINERS ND CBINES OOL SE FILE Foam insert, cutable (3 39 3mm). Engineers fi le -pcs. Wire brush size 3. File brush x. Set of Files, 7-pcs OOL SE SOCKE WRENCH 3/8 Foam insert, cutable ( mm). Set of socket wrench (-edged size 8 9, Inbus size3 - ). Set of Socket Wrenches 3/8, 3-pcs OOL SE SCREWDRIVER, ISOLED Foam insert, cutable ( mm). Screwdriver, slot (size, 3,, 6,). Screwdriver, cross (size - ). Voltage tester (size. 3). Set of Screwdrivers, isolated, 9-pcs OOL SE PLIERS, VDE ISOLED Foam insert, cutable ( mm). Combination plier. Needle nose plier, straight. Wire cutter plier. Cable stripper. Set of Pliers, VDE isolated, -pcs OOL SE MESURING OOLS Foam insert, cutable ( mm). Digital vernier caliper (sizemm). Flat angle (size x7mm). L-blade (size xmm). Präcision steel ruler (size 3mm). ape measure (size,). Set of Measuring ools, -pcs technical details are subject to change without notice.

26 . CONINERS ND CBINES COUNLESS COMBINION POSSIBILIIES he cabinet program of hera bases on a perfectly elaborate modular system, that allows the combination of various elements to an unique cabinet wall. he program range offers various decors and features. he rear walls are decorative and allow set-up in room centers. ll cabinets, except corner cabinets are supplied completely assembled, however, if shipped internationally, they may come in parts for economical reasons. mm (OH) 3mm (3OH) 78mm (OH) 7mm 6mm Cabinet OH Base 6mm 6mm Cabinet 3OH Base mm 7mm 6mm Cabinet OH Cabinet OH Base 6mm 6mm Cabinet OH Base 7mm mm 7mm 6mm Cabinet OH ray Board Cabinet OH Base.6 technical details are subject to change without notice

27 . CONINERS ND CBINES he modular cabinet system of hera Modular cabinet program with: -- widths: mm, 8mm, mm, mm -- 3 depths: 3mm, mm, 6mm -- heights: OH = mm, OH = 7mm, 3OH = 6mm, OH = 6mm, OH = mm 68mm (6OH) 6mm (OH) mm 6mm Cabinet OH Base 6mm mm 7mm 6mm Cabinet 3OH ray Board Cabinet OH Base mm 6mm 6mm Cabinet OH Cabinet OH Base 6mm mm 6mm 6mm Cabinet 3OH ray Board Cabinet 3OH Base mm mm 6mm Cabinet OH Cabinet OH Base technical details are subject to change without notice.7

28 . CONINERS ND CBINES SNDRD DECOR, IN ESD OR NON-ESD light grey BiColor (light grey / anthracite) OHER DECORS beech maple pepple indus grey FUNCIONL DECORS magnetic decor greenboard decor whiteboard decor.8 technical details are subject to change without notice

29 . CONINERS ND CBINES WOOD BSE Surrounding frame 9mm, melamine resin covered chipboard, all sides with mm PP plastic edge. Hiddenly incorporated metal levellers, adjustable by mounting holes within the cabinet body. Completely assembled to the cabinet. adjustment of levellers Wood Base 8. BB. H BB Width H Height Version 8 mm 8mm mm 9mm mm 9mm 3 6mm 3mm Standard ESD mm SEEL BSE Surrounding frame made of folded steel with durable conductive powder coating in light grey. Hiddenly incorporated metal levellers, adjustable by mounting holes within the cabinet body. In ESD version the base is conductively connected to the cabinet body. Completely assembled to the cabinet. bsolutely rust-proof, even at high humidity and moist floor. Height: mm. Steel Base 8. BB. BB Width mm 9mm 8 8mm mm mm 9mm mm technical details are subject to change without notice.9

30 . CONINERS ND CBINES CBINE WIH HINGED DOORS Body made of 9mm thick melamine resin covered chip board. Side walls with hole line in 3mm raster. Solid, decorative rear wall (3mm thick). Dust protected due to surrounding rubber lip. 7 opening hinges, completely made of metal. Right door with espagnolette lock (master-key-system) and handle knob. Left door with stopper and rubber lip. Maser-key-lock, made of metal with replacable core Metal hinge, opening 7 Dust protected due to rubber lip Cabinet with Hinged Doors 8. H BB.. F H Height (excl. base) BB Width F Form Version OH mm mm door 6mm doors or Standard OH 7mm 8 8mm doors 3mm door, right hinged ESD 3 3OH 6mm mm doors mm door, left hinged OH 6mm mm doors OH mm.3 technical details are subject to change without notice

31 . CONINERS ND CBINES COMPRMEN CBINE Body made of 9mm thick melamine resin covered chip board. Side and intermediate walls with hole line in 3mm raster. Solid, decorative rear wall (3mm thick). Dust protected due to surrounding rubber lip. 8 opening hinges, completely made of metal. Doors with right hinges and lock (master-key-system) and handle knob. Compartment Cabinet 87. H BB. H Heigth (excl. base) BB Width lines (7mm) 8 8mm 6mm 3 3 lines (6mm) mm 3mm mm CBINE WIH SLIDING DOORS Body made of 9mm thick melamine resin covered chipboard.. Intermediate wall with hole line in 3mm raster. Solid, decorative rear wall (3mm thick). Low friction plastic rollers for sliding doors. Safety clylinder push-lock (master-key-system) and metal handles. Cabinet with Sliding Doors 8. H BB. H Height (excl. base) OH mm OH 7mm BB Width 8 8mm mm 6mm 3mm Version Standard ESD 3 3OH 6mm mm mm OH 6mm OH mm technical details are subject to change without notice.3

32 . CONINERS ND CBINES OPION FULLY GLSSED DOORS FOR CBINE Surcharge for cabinets with hinged doors or sliding doors made of safety glass, 6mm, clear. Fully Glassed Doors for Cabinet 8. H BB. H Height BB Width OH mm OH 6mm mm OH 7mm OH mm 8 8mm 3 3OH 6mm mm mm OPION PRILLY GLSSED DOORS FOR CBINE Surcharge for cabinets with hinged doors or sliding doors. Wooden doors with safety glass inlay, 6mm clear. Partially Glassed Doors for Cabinet 8. H BB.6 H Height BB Width OH mm OH 6mm mm OH 7mm OH mm 8 8mm 3 3OH 6mm mm mm fully glassed doors partially glassed doors.3 technical details are subject to change without notice

33 . CONINERS ND CBINES CBINE WIH ROLLER SHUER Body made of 9mm thick melamine resin covered chipboard, completely assembled. Side walls with hole line in 3mm raster. Solid, decorative rear wall (3mm thick). Roller shutter rolled-up in the right side (this reduces the usable width by mm). Safety cylinder push-lock (master-key-system) and metal handles. Cabinet with Roller Shutter 83. H BB. H Height (excl. base) BB Width Version OH mm 3 3OH 6mm 8 8mm 6mm Standard OH 7mm OH 6mm mm 3mm ESD mm mm SHELF CBINE Body made of 9mm thick melamine resin covered chipboard, completely assembled. Side walls with hole line in 3mm raster. Solid, decorative rear wall (3mm thick). Shelf Regal Cabinet H BB. H Height (excl. base) BB Widht Version OH mm 3 3OH 6mm mm mm 6mm Standard OH 7mm OH 6mm 8 8mm mm 3mm ESD OH mm mm technical details are subject to change without notice.33

34 . CONINERS ND CBINES OPION INERMEDIE WLL Firmly assembled intermediate wall for all cabinets with two hinged doors, cabinets with roller shutters and shelf cabinets from width 8 - mm. 9mm thick melamine resin covered chipboard and hole line in 3mm raster. Intermediate Wall 8. H. H Height Version OH mm OH 6mm 6mm (for cabinet depth: 6mm) Standard OH 7mm OH mm 367mm (for cabinet depth: 3mm) ESD 3 3OH 6mm 6mm (for cabinet depth: mm) CORNER SHELF ND CORNER CBINE WIH HINGED DOORS Body made of 9mm thick melamine resin covered chipboard. Base with incorporated metal levellers, incl. shelf boards, height adjustable. Cabinet available with one or two doors, with metal hinges, espagnolette lock (master-key-system) and handle knob. Dimensions: x mm Front width: mm (D: 6) 6mm (D: ) 8mm (D: 3) Corner Shelf and Corner Cabinet with Hinged Doors 8 F. H. F Form H Height Version Corner Shelf OH mm 6mm Standard Door Corner Cabinet OH 7mm 3mm ESD Door Corner Cabinet 3 3OH 6mm mm OH 6mm OH mm.3 technical details are subject to change without notice

35 . CONINERS ND CBINES WOOD SHELF BORD Shelf board for cabinets with hinged doors, cabinets with sliding doors and with roller shutters, incl. shelf clips. Melamine resin covered chipboard with mm PP plastic edge. Load capacity: 6kg/m² (9mm thick) 9kg/m² (mm thick) metal shelf clip Wood Shelf Board 8.3 BB. S BB Width S hick Version 3 37mm (for 8mm cabinet with intermediate wall) 6mm 9mm Standard 38mm (for mm cabinet with intermediate wall) 36mm mm ESD 7mm (for mm cabinet with intermediate wall) 6mm 6 7mm (formm cabinet with intermediate wall or 8mm roller shutter cabinet) 8 76mm (for 8mm cabinet or mm roller shutter cabinet) 96mm (for mm cabinet or mm roller shutter cabinet) 6mm (for mm cabinet) SHEE SEEL SHELF BORD Heavy duty shelf board for cabinets with hinged doors, cabinets with sliding doors, with roller shutters and shelf cabinets, incl. shelf clips. bsolutly sturdy due to 3fold bending at front and rear side. From width of 9mm reinforced. Made of sheet steel with durable conductive powder coating in light grey. Load capacity: kg/m². Height: mm. Sheet Steel Shelf Board -- load capacity kg/m² -- conductive powder coating from width 9mm reinforced Sheet Steel Shelf Board 8.3 BB. BB Width 8 76mm ((for 8mm cabinet 6mm (for cabinet depth: 6mm) or mm roller shutter cabinet) 36mm (for cabinet depth: 3mm) 96mm (for mm cabinet 6mm (for cabinet depth: mm) or mm roller shutter cabinet) 6mm (for mm cabinet) technical details are subject to change without notice.3

36 . CONINERS ND CBINES SORE YOUR MERILS ORDERLY ND SFE You are searching for a solution to store files, working clothes and sensible electrical devices in a professional way? he cabinet system of hera offers the right possibility for each application. For an ergonomic handling we offer not only the cabinets but also the internals like shelf boards, extensional cable supports, etc. See our details on the next pages with practical examples for applications..36 technical details are subject to change without notice

37 . CONINERS ND CBINES BOOKEND FOR SHELF BORD he bookend is plugged to a sheet steel shelf board and is stepless movable. Made of sheet steel with durable light grey powder coating. Dimensions: 9 x mm (DxH). Bookend for Shelf Board EXENDBLE SHELF BORD Metal roller guides with blocking in extended position. Shelf made of melamine resin covered chipboard, sides with mm PP plastic edge. Load capacity: N. Height: mm. Extendable Shelf Board 8.6 BB. BB Width 3 37mm (for 8mm with intermediate wall) 6 7mm (for mm with intermediate wall) 9mm (for cabinet depth: 6mm) 38mm (for mm cabinet) 8 76mm (for 8mm cabinet) 3mm (for cabinet depth: 3mm) 7mm (for mm with intermediate wall) 96mm (for mm cabinet) 9mm (for cabinet depth: mm) WRDROBE RIL ND BRCKE Wardrobe rail made of oval chromed tube incl. metal support for the fixation to the side walls. Wardrobe bracket for cabinet depth of mm. For the acceptance of hangers, so the cabinet could be partly used as wardrobe. wardrobe rail wardrobe bracket Wardrobe Rail and Bracket 8. BB. BB Width 3 37mm (for 8mm cabinet with intermediate wall) 38mm (for mm cabinets) 7mm (for mm cabinets with intermediate wall) 6 7mm (for mm cabinets with intermediate wall or 8mm roller shutter cabinet) 8.. Wardrobe Bracket 8 76mm (for 8mm cabinet or mm roller shutter cabinet) 96mm ((for mm cabinet or mm roller shutter cabinet) 6mm (for mm cabinet) technical details are subject to change without notice.37

38 . CONINERS ND CBINES SHELF BORD FOR RINING SYSEMS Melamine resin covered 6mm thick wooden shelf board, sides with mm PP plastic edge. Installed slotted mat for the upright storage of DIN training systems. Shelf Board for raining System 8.6 BB. 3 BB Width Version 38mm (for W: ) mm (for D: 6mm) one side with slotted mat 7mm (for W: w. intermediate wall) 3mm (for D: 3mm) two sides with slotted mat 6 7mm (for W: w. interm. wall or 8mm roller shutter) mm (for D: mm) 8 76mm (for W: 8 or mm roller shutter) RY FOR RINING BOXES Solid tray made of deep-drawn plastics, for the storage of max. 6x hera training boxes. Incl. x guiding rails screwed to the inner side of the cabinet. Suitable for following cabinets with hinged doors and intermediate wall: x mm (WxD) x 6mm (WxD). Dimensions: 7 x 7mm. ray for raining Boxes and Guiding Rails en 8.6. CBINE CORDHOLDER elescopic rail, locking in extended position. Cordholder made of aluminium sheet with durable, light grey powder coating. Comb depth: 8mm. Different gaps for cords with max. mm diameter. Length: / / 3mm. Cabinet Cordholder 8.6. L L Length mm 3mm mm (for D: 6mm) (for D: 3mm) (for D: mm).38 technical details are subject to change without notice

39 . CONINERS ND CBINES INEGRION DRWER Black powder coated sheet steel drawer with telescopic full extension, completely in metal. ppox. 33mm overextension. Load capacity: 7N. Height: 9mm. Integration Drawer 8.7 BB. BB Width 38mm (mm cabinet) 96mm (mm cabinet) for cabinet depth: 6mm 6 7mm (mm cabinet + indermediate wall) 6mm (mm cabinet) for cabinet depth: 3mm 8 76mm (8mm cabinet) SUPPOR FOR FOLDERS Sheet steel frame for hanging folders with black powder coating, with telescopic full extension incl. steel divider. pprox. 33mm overextension. Load capacity: 7N. Height: 9mm. Support for Folders 8.8 BB. BB Width 38mm (mm cabinet) 96mm (mm cabinet) for cabinet depth: 6mm 6 7mm (mm cabinet + indermediate wall) 6mm (mm cabinet) for cabinet depth: 3mm 8 76mm (8mm cabinet) OPION DRWER FRON If integration drawers or folder supports should be installed into a doorless cabinet or cabinet with glass-door. Light grey melamine resin covered chipboard with recessed grip. Option Drawer Front 8.8 BB.7 H BB Width H Height 38mm 96mm HE HE 6 7mm 6mm 3 3HE 6 6HE 8 76mm technical details are subject to change without notice.39

40 . CONINERS ND CBINES DRWER CBINE Body made of 9mm thick melamine resin covered chipboard with 3mm decorative rear wall (comes completely assembled). Dust protection due to surrounding rubber lip. Durable black powder coated sheet steel drawer with telescopic full extension, completely metal made. ppox. 33mm overextension. Load capacity: 7N. Drawer fronts with metal handles, front height in HE (HE = 6mm). op front with central lock (master-key-system). With single drawer blocking system and integrated counter weight for absolute stability even if the drawer is open Drawer Cabinet 86. H BB. S H Height BB Width S Drawers Version OH 7mm mm 6mm 3 in height 7: x 3HE + x HE Standard 3 3OH 6mm 8 8mm 3mm in height 7: 3x 3HE + x HE ESD mm in height 7: x 3HE + x HE mm in height 6: x 3HE + x HE + x HE 6 in height 6: x 3HE + x HE 7 in height 6: x 3HE + x HE + x HE 8 in height 6: x 3HE + 6x HE + x HE 9 in height 6: x 3HE + 8x HE. technical details are subject to change without notice

41 . CONINERS ND CBINES OPION CLOSING MECHNISM WIH SOFSOP Self closing mechanism for drawer with two dampers. SoftStop per Drawer 86.. SE OF PERFORED PNELS FOR CBINE DRWER Mandatory if cabinet drawers should be equipped with partitions and dividers. x perforated sheet steel panels with black powder coating. 6x drawer clips. Set of Perforated Panels for Cabinet Drawer W: 37mm for cabinet width mm W: 36mm for cabinet width mm + intermediate wall W: 736mm for cabinet width 8mm W: 936mm for cabinet width mm B: 36mm for cabinet width mm DIVIDER FOR DRWER For dividing the drawers between the perforated panels or between drawer clips. With mounting holes for the installation of partitions. Double walled sheet steel with black powder coating. Divider for Cabinet Drawer D: 7mm for cabinet depth 6 D: mm for cabinet depth 3 PRIION FOR DRWER For the lengthwise separation between the dividers. Sheet steel with black powder coating. Partition for Drawer Partition (3mm) Partition (mm) Partition 6 (mm) Partition 7 (mm) technical details are subject to change without notice.

42 . CONINERS ND CBINES FOLDER CBINE Body made of 9mm thick melamine resin covered chipboard (comes completely assembled). Decorative 3mm rear wall. Dust protection due to surrounding rubber lip. Metal support for hanging folders with telescopic full extension, 9mm thick front with metal handles. op front with central lock (master-key-system). With single drawer blocking system and integrated counter weight for absolute stabilization even with open drawer Folder Cabinet 8. H BB. H Height (excl. base) BB Width OH 7mm mm mm 6mm 3 3OH 6mm 8 8mm mm 3mm. technical details are subject to change without notice

43 . CONINERS ND CBINES COMPENSING BORD Melamine resin covered, light grey chipboard with mm PP plastic edges. Height: 9mm. Compentsating Board 8. BB. BB Width Version mm mm 6mm mm Standard 8 8mm m 3mm ESD EXENSIONL RY BORD Compensation board with cutouts for the extensional tray boards, made of chipboard with mm PP plastic edge. Extensional tray board with metal handles and stop position. Colour: light grey, pearl structured. Height: 9mm. Extensional ray Board 8. BB. BB Width 8 8mm mm mm 6mm 3mm mm technical details are subject to change without notice.3

44 . CONINERS ND CBINES SEP BY SEP O MORE SORGE ROOM You have lots of stuff in a room with high ceiling and trouble to get it all stored? - No problem: with out cabinets of 68mm total height you can stow a lot. nd best of all, it all stays in convenient reach due to the easy-toinstall movable ladder system.. technical details are subject to change without notice

45 . CONINERS ND CBINES RIL FOR CBINE LDDER Rail incl. brackets and cabinet paneling. Panel suitable for cabinet (panel height: 6mm). Rail made of anodized aluminium with metal brackets. Prepared for easy installation on customers site. Guiding Rail for Cabinet Ladder (per meter) Standard ESD CBINE LDDER Made of aluminium with 7 steps. he ladder requires approx. mm floor space. Cabinet Ladder 8.. mobile with casters 8.. hooked into rail cabinet wall with rail system and ladder with casters cabinet wall with the ladder hooked into the rail technical details are subject to change without notice.

46 . CONINERS ND CBINES SHEE SEEL DRWER CBINE Completely welded sheet steel housing with durable light grey powder coating. Replacable lock wih two keys. Sheet steel drawers with precision ball bearings. Sides of the sheet steel drawers with the same hight than the front, with slotted strips in 7mm raster for partition. Drawers: Full extension ( % extendable). Load capacity: kg. Internal with surrounding slot strip for drawer dividers. Drawer front in mm, with whole width handle strip (lable holder). Inner dimensions of drawer: Width: 6 / 98mm (at 77 / 3mm) : 9 / 6mm (at 7 / 7mm). ESD Version: Conductive powder coating in grey (sim. to RL 736) Sheet Steel Drawer Cabinet 98. B HH. S B Width HH Height S Drawers Version 3mm 7 7mm 7mm 8x 7(H:7) Standard 7 77mm mm 7 7mm x 7 (H:) ESD mm 8x 7 (H: ) x 7 + x (H: 7) x 7 + 3x + x (H: ) 6x 7 + 3x + x (H: ) 3 x 7 + x + x (H: 7) x 7 + x + x 3 (H:) x 7 + x + x (H: ) depth: 7-7E depth: 7-36E width: 77-36E width: 3-E.6 technical details are subject to change without notice

47 . CONINERS ND CBINES SLOED PRIIONS FOR SHEE SEEL DRWER For the lengthwise and crosswise partitioning of drawers. Slots in 7mm raster. Made of sheet steel with assembly set. Colour: grey. Slottet Partitions for Sheet Steel Drawers front height 7 8E / 3mm E / 6mm E / 6mm PLIN PRIIONS FOR SHEE SEEL DRWER For the length - and width partition of the drawers in 7mm steps. Made of sheet steel incl. assembly set. Colour: grey. Plain Parttions for Sheet Steel Drawer front height 7 8E / 3mm E / 6mm E / 6mm DIVIDERS FOR SHEE SEEL DRWERS In combination with the partitions this enables an individual fine partitioning of drawers in 7mm raster. he slanted label holder fits accross the whole width and accomodates label holders or barcode labels. Made of aluminium. Divider for Sheet Steel Drawer front height 7 3E / 8mm E / 99mm E / mm E / mm E / 33mm technical details are subject to change without notice.7

48 . CONINERS ND CBINES SHEE SEEL CBINE WIH HINGED DOORS Completely welded sheet steel construction. Colour: light grey. mm internal raster for shelf boards. Hinged sheet steel doors, opening angle. Recessed handle and cylindric lock with keys. (master-key-system) 8mm base for an excellent stability. Incl. shelf boards. Sheet Steel Cabinet 97. H BB. H Height BB Width Version mm (incl. x shelf boards) 7 7mm mm Standard 3 mm (incl. 3x shelf boards) mm mm ESD 9mm (incl. x shelf boards) mm SHELF BORD FOR SHEE SEEL CBINE WIH HINGED DOORS Optionally extra shelf boards. Surface slotted for the acceptance of partitions. Made of anodized sheet steel. Load capacity: 6kg with even load. Height: 3mm. Shelf Board for Sheet Steel Cabinet with Hinged Doors x 6mm (WxD) for cabinets 7 x x 36mm (WxD) for cabinets 7 x x 6mm (WxD) for cabinets x x 36mm (WxD) for cabinets x x 6mm(WxD) for cabinets x x 36mm (WxD) for cabinets x.8 technical details are subject to change without notice