Lab and Shop Orientation
|
|
|
- Dora Mills
- 5 years ago
- Views:
Transcription
1 Lab and Shop Orientation The lab is located at SNARL, 1016 Mount Morrison Road. The main lab area consists of 4 individual lab spaces (1002a-d). Smaller, individual labs ( ) are available as well as one environmental chamber (cold room in lab 1101). The Layout can be seen on the following floor plan. In addition, we have one animal quarter, nine stream channels and the fish house. Assignment and billing is per laboratory space or per channel. The emergency eye wash and shower are located in lab 2002 between 2002a and 2002d (Figure 1). An additional eye wash is located in room 1101 (Figure 2). The common area lab (1005) contains most of the shared equipment including the water system, fume hood and waste storage. Figure 1: Emergency eye wash and shower located in lab 2002.
2 Figure 2: Emergency eye wash station in Lab Some labs are assigned long-term to our resident research staff. These are currently labs 1003 and Others are held back for our short-term users. Users are permitted to request a particular lab space but in order to maximize lab use final assignment is at the discretion of the Director. The equipment listed below has been designated for general use. We will need to know in advance of your visit what equipment you will require. If you require use of any equipment located in one of the permanent staff labs (1003 and 1010), please contact the researcher or one of their technicians to arrange scheduling. In addition, any equipment requiring long-term storage of samples (i.e. drying oven at specific temperature, incubator, etc.) should be booked in advance to avoid conflicts of use. Some equipment is standard lab issue (i.e. fume hood); others will require some instruction before use. If you do not fully understand how to operate a piece of equipment, please ask one of the permanent staff located in the lab or contact Kim Rose or Carol Blanchette in Headquarters. Notes: 1. Samples: All samples and supplies stored in the lab (cabinetry, refrigerator and freezer) must be labeled with the owner's name and contents. 1. Hazardous Waste: As the SNARL lab is on a septic system no chemicals are permitted to go down the drain. All hazardous chemical waste must be properly labeled and stored. Chemical waste containers are provided by SNARL and must be labeled with the details of the waste on the first day of use. This is both a legal
3 requirement and for the safety of those disposing of the waste. Labels are located beside the Fume Hood and must be completely filled in (Figure 3). Storage is located in the cabinets directly under the Fume Hood. Waste is removed annually by Environmental Health & Safety (EH&S) located at UCSB. To date, EH&S has been covering the costs of this removal, however if they decide to pass that cost onto SNARL, the cost will, in turn, be passed onto the user. Figure 3: Health and Safety chemical waste label. Not Supplied (We have a limited supply of glassware and consumables to share). Contact Kim Rose at kim.rose@ucsb.edu if it is inconvenient to bring your own. You will be responsible for bringing your own: Microscopes Glassware Consumables such as paper towels/chemwipes/pipettes Chemicals (check before buying) Sharpe's and other hazardous waste containers Any equipment not noted below
4
5 Common Area Labs Lab #1010 Dr. Herbst Lab Lab #1002 Eye wash and safety shower Drying oven Refrigerator/freezer White Board with markers Lab #1005 Fume Hood and waste storage Water System o Milli-RO o Milli-Q Analytical Balance Abbot V-1100D spectrophotometer Turner TD700 fluorometer Vacuum Oven Vortex Mixer PC 353 Stirrer Muffle Furnace Lab #1007 Lab #1100 Stand Up Freezer Incubator Lab #1101 Environmental Chamber Drying oven Lab #1102 & Lab #1103 Dr. Knapp Lab Water bath Autoclave Filtration system -80 freezer Collections Sample archives
6 Power tool/shop orientation Various tools are available - Anyone wishing to use them must contact the Steward, Brent Salzmann or Cabot Thomas for orientation and clearance. Safety training must be completed and documentation signed before use of any power tools in the shop. Figure 4: Tool bench in the shop. Please check with the Steward before borrowing any tools. No tools may be taken off site without prior permission. Tools must be signed out, returned in good shape and signed back in.
7 Figure 5: Power tools are available but you must complete the required safety checks first. Power tools must be signed in and out, cannot be taken from the property and must be returned in working condition. List of power tools available in the shop: bench grinder drill press corded sawzall jig saw (need to supply own blades) palm sander (need to supply own sand paper) corded drill ⅜ chuck metal chop saw Wood Shop
8 We have specialized equipment in the wood shop which requires special skills and knowledge before using. Do not use any of these specialized tools without prior authorization. List of specialized equipment in the wood shop table saw band saw belt/disc sander joiner planer chop saw skill saw List of safety equipment and requirements: personal protective gear (please supply your own) - eye protection - hearing protection - gloves - closed toed shoes - No loose hair or clothing
9 Figure 6: Wood Shop equipment
10 Figure 7: Wood shop equipment
+91-8071678468 Precious Techno Engineering http://www.precioustechno.in/ We "Precious Techno Engineering" are reckoned organization in the market, highly indulged in manufacturing and trading a broad array
Pvt. Ltd. https://www.indiamart.com/macroscientificworks/
+91-8071803351 Macro Scientific Works Pvt. Ltd. https://www.indiamart.com/macroscientificworks/ We are a leading Manufacturer, Exporter and Supplier of a wide assortment of Autoclave Sterilizers, Environmental
1. Conduct yourself in a responsible manner at all times in the laboratory.
LAB SAFETY GENERAL RULES 1. Conduct yourself in a responsible manner at all times in the laboratory. THIS INCLUDES: Staying OFF of your cell phone. Help your Lab Partners, don t just sit back and let them
ESCO. LabTech America A M P L E SCIENTIFIC CITIZEN SCALE INC LABOMED, INC. WORLD CLASS, WORLD WIDE. Rev.2
ESCO WORLD CLASS, WORLD WIDE CITIZEN SCALE INC LabTech America A M P L E SCIENTIFIC LABOMED, INC. Rev.2 ESCO Technologies Biological Safety Cabinets CO2 Incubators Compounding Pharmacy Equipment Laminar
For formulation plant 1 Production Manager R R 2. Supervisor R R 3. Instrument and process control. plant
My document/minutes/eg guidelines state licencing officer (C) 1. Guidelines for the minimum infrastructure to be created by the manufacturers of pesticides and their formulations to meet the requirements
Laboratory Safety Audit
Laboratory Safety Audit Principal Investigator: Building: Room #: Auditor: Date: Lab Safety Plan 1. Lab safety plan available 2. Plan reviewed/evaluated annually 3. Current Lab Safety Guide available 4.
LABORATORY INSPECTION CHECKLIST
LABORATORY INSPECTION CHECKLIST Date of Inspection: Conducted by: Department: Building/Room #: Principal Investigator: PI Present? Yes No Type of Inspection: Semi-Annual (scheduled) Complaint Follow Up
1. Conduct yourself in a responsible manner at all times in the laboratory.
1. Conduct yourself in a responsible manner at all times in the laboratory. 2. Follow all written and verbal instructions carefully. If you do not understand a direction or part of a procedure, ask the
Simco Calibration Laboratory
+91-8049188996 Simco Laboratory https://www.indiamart.com/simcocalibrationlaboratory/ We are involved in Service Provider and a Bath and more. Further, we also render Service, Instrument Service and more.
Go to the Lab! Lab Safety Begins Before You
Lab Safety Lab Safety Begins Before You Go to the Lab! Science is a hands-on laboratory class. You will be doing many laboratory activities, which require the use of: Hazardous chemicals Expensive lab
Machine and Power Tool Safety Checklist. Version 1.1 March Chestnut Street, Suite 400, Philadelphia, PA
Machine and Power Tool Safety Checklist Version 1.1 March 2017 3160 Chestnut Street, Suite 400, Philadelphia, PA 19104 215-898-4453 Machine and Power Tool Safety Checklist Overview The purpose of this
LAB & BIO SCIENTIFIC INSTRUMENTS SCIENTIFIC. Ver (17-1)
LAB & BIO SCIENTIFIC INSTRUMENTS SCIENTIFIC Ver. 2013. 08 (17-1) www.nelis.co.kr Contents 03 About JISICO 04 History of JISICO 05 Certificate of JISICO 06 Special products 08 Drying oven 15 Incubator 23
Laboratory Information
Laboratory Information Lab Information Department Room number and function Principal investigator (PI) PI telephone number PI email address Lab Safety contact person Lab Safety contact telephone number
University of California, Davis Laboratory Self-Inspection Checklist
University of California, Davis Laboratory Self-Inspection Checklist Principal Investigator/Laboratory Supervisor: Laboratories Reviewed: Date: Reviewer: Revised 11/2014 I. SAFETY PROGRAM ADMINISTRATON
Laboratory Safety Laboratory Inspection Checklist
Laboratory Safety Laboratory Inspection Checklist Date Lab Information Department Principal investigator (PI) PI telephone number PI email address Building Lab room numbers Lab phone number Radiation Biosafety
Machine and Power Tool Safety Checklist. Version 1.2 January Chestnut Street, Suite 400, Philadelphia, PA
Machine and Power Tool Safety Checklist Version 1.2 January 2018 3160 Chestnut Street, Suite 400, Philadelphia, PA 19104 215-898-4453 Machine and Power Tool Safety Checklist Overview The purpose of this
Chapter 10: Laboratory Equipment
Chapter 10: Laboratory Equipment Guides to Standard Laboratory Equipment Equipment Approval Prior to purchasing or installing the following equipment, acquire the PI and CHO approval and consult with EHSO:
CHM 130LL: Lab Safety Name: Answer Key _ Section:
Introduction: CHM 130LL: Lab Safety Name: Answer Key _ Section: Safety in the chemistry laboratory is the primary concern of all scientists. Everyone who works in a chemistry lab is responsible for keeping
Laboratory filtration systems.
Laboratory filtration systems www.witeg.de - Home of Innovations Witeg Labortechnik GmbH is one of the leading manufacturers and suppliers of laboratory glassware, custom-built glassware, liquid handling
LSU Inter-Institutional Biological and Recombinant DNA Safety Committee (IBRDSC)
LSU Inter-Institutional Biological and Recombinant DNA Safety Committee (IBRDSC) Policy: Maintenance of Laboratory Equipment Adopted April 26, 2012 Properly functioning laboratory equipment is a critical
Laboratory Inspection Checklist
Laboratory Inspection Checklist Principal Investigator _ Department Building and Room Inspected By Date SUMMARY OF INSPECTION FINDINGS A. No items of non-compliance or unsafe conditions were identified.
Laboratory Safety Audit
Laboratory Safety Audit Principal Investigator: Building: Room #: Auditor: Date: Lab Safety Plan 1. Lab Safety Plan available 2. Plan reviewed/evaluated annually 3. Current Lab Safety Guide available Personnel
A. General Safety LAB/ROOM: INSPECTED BY: DATE:
A. General Safety Item Subject Yes, No, A1 Exits are not obstructed, fastened or locked with keys A2 EXIT signs, if installed are clear and illuminated A3 A4 A5 A6 Fire extinguishers and fire blankets
STUDENT SAFETY RULES
STUDENT SAFETY RULES Purpose Science is a hands-on laboratory class. You will be doing many laboratory activities that require the use of hazardous chemicals. Safety in the science classroom is the #1
Cable Drum Machine. Operation Manual 110ES SERIES. Cleans 1 1/4" to 3" lines up to 25'
Cable Drum Machine Operation Manual 110ES SERIES Cleans 1 1/4" to 3" lines up to 25' Used For: Sinks, Showers &Tub Drains WARNING - Read All Instructions, When Using Electric Tools, Basic Safety Precautions
Powertools Ecoline. Ecoline Powertool set 5pcs. Ecoline Cordless screwdriver. Ecoline Mouse sander. High quality reliable tools.
Powertools 871125271776 Cordless screwdriver with charger, 5-7h charging Voltage: 3,6V RPM: 180 871125271781 Mouse sander 140x140x80mm Wattage: 130W RPM: 0-1300 871125271782 Powertool set 5pcs Impact drill
Honolulu Community College Health & Safety Inspection Checklist for Shops Tech I. Program: Conducted by: Date: Reference 29 CFR 1910.
Program: Conducted by: Date: Means of Egress/Escape Are exits provided to permit the prompt escape of occupants in case of fire or other emergency? Is every exit, way of approach, and way to travel from
WORKPLACE INSPECTION CHECKLIST FOR LABORATORY ENVIRONMENTS
WORKPLACE INSPECTION CHECKLIST FOR LABORATORY ENVIRONMENTS Standard OHS Workplace Inspection Checklist Review Date: Next Review: Inspection Site: Inspection Team: Contacts: Written Laboratory Safety Policies/Procedures/Records
Lab Safety. Section 2L. Chemistry I & II
Lab Safety Section 2L Chemistry I & II 1 Lab Safety Topics General Rules Clothing Accidents and Injuries Handling Chemicals Handling Glassware and Equipment Heating Substances First Aid 2 General Rules
Furnaces. High Temperature Box Furnaces Deluxe Muffle Furnaces Economy Muffle Furnaces... 38
Three Zone Tube Furnace Economy Furnace Lab-Line furnaces are designed to deliver the greatest possible accuracy, convenience and safety. Many models feature precise microprocessor temperature control
Weighing Balances. Hot Plate. Laboratory Oven. Muffle Furnace. Loss On Heating Oven COMMERCIAL EQUIPMENTS. General / Special Purpose Equipment
Weighing Balances Digital Weighing Balances Mechanical Two Pan Balances Spring Balances Laboratory Oven effect of heat & air on Ashpaltic Materials (Thin film test). The unit is heavily insulated & has
ATD /8 Electric Drill
ATD-10538 3/8 Electric Drill Tool specifications: Rated Voltage: (V) 120 Rated Frequency: (Hz) 60 Rated current: (A) 3.3 No-load Speed: (RPM) 0-2700 Speed Selection: Yes Right/Left Rotation: Yes Chuck
Major Hazards in Laboratory
Major Hazards in Laboratory Manish Kumar (Ph.D) Laboratory Guidance and Safety Lecture manishk@tezu.ernet.in 1 Potential hazards in laboratory Potential Hazards High Pressure Gas Autoclave Centrifuge machine
Polymer Characterization Facility 165 S. T. Olin Laboratory. Lab Safety Orientation
Polymer Characterization Facility 165 S. T. Olin Laboratory Lab Safety Orientation Anthony Condo Facility Manager B-71 S. T. Olin 5-9021, amc88@cornell.edu Emergency Contacts In the event of an emergency,
1. Researchers are familiar with the location and contents of: The lab s Chemical Hygiene Plan YES NO
Safety Self-Inspection Checklist for Laboratories One Inspection form per Laboratory Room DATE: BUILDING: ROOM: INSPECTOR: Professor Inspector s Signature Professor s Signature: Answer each question by
Manual. Belt Sander BSL 115/E. ProxxonTools.com
ProxxonTools.com Belt Sander BSL 115/E Manual 3080767 Conforms to ANSI/UL 60745-1 ANSI/UL 60745-2-4 Certified to CAN/CSA-C22.2 No. 60745-1-04 CAN/CSA-C22.2 No. 60745-2-4-04 Fig. 1 Fig. 2 Fig. 3 Fig. 4
Student Lab Procedures. Lab Safety Orientation
Student Lab Procedures Lab Safety Orientation These basic rules should be followed by you & your students. The key to teaching lab safety is to role model it first. A class should be spent on: Location
LAWN & GARDEN ITEM 4HR
LAWN & GARDEN Aerator 18" (Gas core type) $60 $85 $275 Aerator 48" LD(Tow Behind Spike type) $25 $40 $140 Aerator 48" HD (Tow Behind Core type) $45 $65 $215 Bed Edger $70 $90 $350 Bed Redefiner $35 $50
WTAMU Academic Research Environmental Health and Safety (AR-EHS) Laboratory Inspection Checklist
WTAMU Academic Research Environmental Health and Safety (AR-EHS) Laboratory Inspection Checklist Date of Inspection: Location (room # & building): Conducted By: Laboratory Title: Principal Investigator/Supervisor:
+91-8048736940 Bio Technics India http://www.labinstrumentindia.com/ We are leading manufacturer and supplier of laboratory-scientific instruments like Laboratory Bacteriological Incubators, Laboratory
Safety In the Science Lab
Lab Safety: Everyone Is Responsible! Safety In the Science Lab Rules and Symbols Mrs. Mork Greenville Middle School Safety First Science is a hands-on laboratory class. You will be doing many laboratory
Safety and Rules of the Lab
Safety and Rules of the Lab Lab Safety Rules Part of this PowerPoint has been taken from the power point of. Tim Baker, Adam Kueltzo, and Todd Katz.former NCHS students And from Lyndon B. Johnson High
Mixer, Planetary Food STANDARD OPERATING PROCEDURE
STANDARD OPERATING PROCEDURE Mixer, Planetary Food Model: SM-402-NA Manufacturer: Doyon Incorporated Location: Wet Processing Pilot Plant, 1091 Food Sciences Building Publication Date: 03/26/2014 Iowa
Kshitij Innovations. https://www.indiamart.com/kshitij-innovations/
+91-8048758108 Kshitij Innovations https://www.indiamart.com/kshitij-innovations/ We are one of the leading manufacturer, supplier & exporter of superior quality range of industrial and commercial pharmacy
New Science Building - Chemistry Department Requirements
Chemical Preparation Room Req'd for 2 techs preparing 20 sections of lab ea semester. Dimension: 30'x 30' (900ft 2 ). Balance, Sartorius LA1200 & analytical 3 Bulletin Board, dry erase 36"hx72"w 1 $500
MCDB4100: LABORATORY SAFETY GUIDELINES
MCDB4100: LABORATORY SAFETY GUIDELINES Dress code for the lab session Exposed skin is a risk for contact with hazardous materials. For your protection, you must dress properly for each laboratory session.
Gautam Lab Equipment. https://www.indiamart.com/gautam-lab-equipment/
+91-8071683121 Gautam Lab Equipment https://www.indiamart.com/gautam-lab-equipment/ We are one of the most renowned organizations holding immense expertise in manufacturing and supplying a wide range of
Cable Drum Machine Operational Manual CP1020
TOOLS FOR THE PROFESSIONAL PLUMBER TOOLS FOR THE PROFESSIONAL PLUMBER Cable Drum Machine Operational Manual CP1020 Used For: Sinks, Showers and Tub Drains Cleans 3/4" to 3" lines up to 25' (Not for roots)
Safety in the Chemistry Lab
Safety in the Chemistry Lab Introduction: Safety in a chemistry laboratory is everyone s responsibility. An accident in the laboratory can cause serious injury. However, many accidents are preventable
Silica Exposure Control Plan
Jobsite: Project Executive: Superintendent: Competent Person: Date: Project Manager: Safety Director: Emergency Num. Sawing Cutting Coring Drilling Grinding Control Joints Tuckpointing Cement Board Drywall
List of equipment available in each laboratory.
List of equipment available in each laboratory. Pic Capacity Equipment Quantity Subjects Involved Belt And Disc Sanding Machine 2 Oscilatting Belt Edge Sender 3 Bench Grinder 4 Circular Table Saw with
Agricultural and Biological Engineering. A Vortex Forage and Biomass Sample Dryer Dennis R. Buckmaster Associate Professor of Agricultural Engineering
College of Agricultural Sciences Cooperative Extension Agricultural and Biological Engineering A Vortex Forage and Biomass Sample Dryer Dennis R. Buckmaster Associate Professor of Agricultural Engineering
Physical Hazards -Recognition, Evaluation and Control
Physical Hazards -Recognition, Evaluation and Control I. RECOGNITION OF There is a lot more to laboratory safety than protecting yourself from chemical hazards. Physical hazards are the most common hazard
Safety In the Science Lab
Safety In the Science Lab Rules and Symbols Purwanti Widhy H Safety First Science is a hands-on laboratory class. You will be doing many laboratory activities, which require the use of hazardous chemicals
+91-8048762283 Bioline Technologies http://www.biolinetechnologies.com/ We are one of the leading business entities engaged in Manufacturing and wholesaling a wide range of Laboratory & Blood Bank Equipment.
Safety In the Science Lab
Lab Safety: Everyone Is Responsible! Safety In the Science Lab Rules and Symbols Millbrook Middle Junior High Safety First Safety is my #1 priority in the science lab. Science is a hands-on laboratory
D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL
D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
BG8SS. 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions
BG8SS 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This
LABORATORY CHEMICAL HYGIENE AND SAFETY PLAN
LABORATORY CHEMICAL HYGIENE AND SAFETY PLAN Laboratory Room Number (s) Building Principle Investigator or Responsible Individual (s) Date Review / Revision Date INTRODUCTION Kent State University has made
Module 9: Kitchen Planning 3 By Chelsey Goraczkowski
Module 9: Kitchen Planning 3 By Chelsey Goraczkowski Assignment: Show examples of kitchens where at least one rule was ignored from this module Problem: the stove is directly next to the refrigerator.
We have widest range of vacuum coating equipments. Our products can do Pulsed laser deposition (PLD),
+91-8071676961 Nano Science & Technology Company https://www.indiamart.com/nanosciencetechnology/ We have widest range of vacuum coating equipments. Our products can do Pulsed laser deposition (PLD), Magnetron
VP, Facilities and Construction Management
Title: Biological Safety Cabinets Procedure Effective Date: November 2005 Revision Date: February 24, 2017 Issuing Authority: Responsible Officer: VP, Facilities and Construction Management Director Environmental
Garage Ventilation Installation Instructions
Garage Ventilation Installation Instructions Parts List * Quantity Exterior Louver & Frame Kit 4 in. x 4 in. w/ Fasteners (Fastener shown as a) () Louver 4 in. x 8 in. w/ Fasteners (Fastener shown as a)
+91-8048077599 Hindustan Apparatus Mfg. Company http://www.bodincubator.net/ Manufacturer and exporter of laboratory equipment, testing instrument, quartz and industrial glassware, oil testing instruments
Radiation Safety Guidelines for Non-Users
Radiation Safety Guidelines for Non-Users This is a Read and Sign Awareness Training document. You should read and sign this document if you: 1. DO NOT work directly with radioactive materials or other
Polymer Characterization Facility 165 S. T. Olin Laboratory. Lab Safety Orientation
Polymer Characterization Facility 165 S. T. Olin Laboratory Lab Safety Orientation Anthony Condo Facility Manager B-71 S. T. Olin 5-9021, amc88@cornell.edu Emergency Contacts In the event of an emergency,
Lab Safety presentation and contract first day of lab know the locations of everything in your lab no student can participate in class without signed
Lab Safety presentation and contract first day of lab know the locations of everything in your lab no student can participate in class without signed contract Lab inspections Safety Office will be randomly
Wattage Estimation Guide
Estimation Guide Tip: Don't just add up the total wattage for everything you want to power. See the section on power management to learn how to use a smaller generator to power more. Home Applications
English BT3600
www.blackanddecker.com 3 English BT3600 FIG. 1 FIG. 2 150mm BENCH GRINDER BT3600 GENERAL SAFETY RULES WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric
LIST OF PUBLISHED STANDARDS
Report : 08-0-0 Page o : Of 5 LST OF PUBLSHED STDRDS Total Count: 9 SS nt pproved mendment SBS/TC 07 SS 60065:05/EC 60065:0 7. udio, video and similar electronic apparatus 05-0- - Safety requirements 00-0-
Shop Safety Test. Common hazards in agricultural mechanics: Name. Handout 4. Instructions: Write the correct letter in the blank provided.
Shop Safety Test Name Handout 4 Instructions: Write the correct letter in the blank provided. Common hazards in agricultural mechanics: 1. Most injuries that occur in the agricultural mechanics shop are
LAB SAFETY FOR CUSTODIANS
LAB SAFETY FOR CUSTODIANS Lab Waste Biological Waste Chemical Waste Regulated Medical Waste Non- Regulated Medical Waste Radioactive Waste Biohazardous Waste (Regulated Medical Waste) Wastes that are exposed
Lead Safety for Renovation, Repair, and Painting. Requirements in the EPA RRP Rule:
Requirements in the EPA RRP Rule: The RRP Rule prohibits the use of certain practices. These prohibited practices are discussed in this module. This module also contains recommendations regarding how to
Before Lab Work, Get to Know: Hazards of materials & agents and their prescribed safety procedures
Before Lab Work, Get to Know: Hazards of materials & agents and their prescribed safety procedures Also Get to Know: Emergency spill procedures. Handling equipment Location of fire ext., eye wash, shower,
Animal Tissue Culture SQG 3242 Equipment and Lab design. Dr. SITI PAULIENA MOHD BOHARI
Animal Tissue Culture SQG 3242 Equipment and Lab design Dr. SITI PAULIENA MOHD BOHARI Sign Symbol? Biohazard sign Means? Hazardous For labeling the biological materials that carry a significant health
PRICE LIST INCUBATORS
INCUBATORS MODEL NO. DESCRIPTION CUBIC FT PRICE ACRYLIC "SEE THROUGH" DOOR 10-140 ACRYLIC DOOR INCUBATOR.7 $405.00 10-140E DIGITAL ACRYLIC DOOR INCUBATOR 10-140AE AIR-FORCED DIGITAL INCUBATOR.7 $660.00.6
Biological Safety Cabinets. Biological Safety Cabinets
Biological Safety Cabinets Biological Safety Cabinets(BSCs) are among the most effective, as well as the most commonly used primary containment devices in laboratories working with infectious agents. Properly
It starts with responsibility... Lab Safety. Avoid Horseplay. Monitor... Safety is #1: Safety is #1 Continued
Lab Safety It starts with responsibility... The responsibility for lab safety rests with each and every student in the laboratory. You must use common sense and work carefully to avoid chemical spills,
ORION. Safety Class 2 100% exhaust. ALMOST Rocket Science
LaboGene SCANdinavian by design. ORION ALMOST Rocket Science Safety Class 2 100% exhaust Probably the best Class 2 with 100% exhaust for work with animal handling or high concentrations of organic solvents
Department of Civil and Environmental Engineering University of Waterloo
Department of Civil and Environmental Engineering University of Waterloo Safety Information for Environmental Labs This information is relevant for the following rooms in DWE: DWE-1407 DWE-1417 DWE-1421
SECTION LABORATORY EQUIPMENT CONSTRUCTION STANDARD PART 1: GENERAL Scope of Standard
PART 1: GENERAL 1.01 Scope of Standard A. This standard provides general guidance concerning the specific preferences of the University of Texas at Austin for safety equipment used in or in support of
PS /2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
PS07214 4 1/2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
Bread Slicer, Countertop STANDARD OPERATING PROCEDURE
STANDARD OPERATING PROCEDURE Bread Slicer, Countertop Model: 711 Manufacturer: Oliver Products Company Location: Processing Lab, 1384 Food Sciences Building Publication Date: 03/26/2014 Iowa State University
Mixer with Lifting Cart STANDARD OPERATING PROCEDURE
STANDARD OPERATING PROCEDURE Mixer with Lifting Cart Model: XD-30VM Manufacturer: SPX Corporation, Lightnin Mixers Location: Wet Processing Pilot Plant, 1091 Food Sciences Building Publication Date: 03/04/2014
Safety Warnings. Work area safety. Electrical Safety. Personal Safety
Table of Contents Safety Warnings...2 Work area safety...2 Electrical Safety...2 Personal Safety...2 Power tool use and care...3 Service...3 Hammer safety warnings...3 Product Layout...4 Product Description...4
Safety In Chemistry. Identified Risks and Hazards
Safety In Chemistry ] Introduction Students have a duty of care to minimize and eliminate chemical risk and hazards through proper use of laboratory equipment and to be prudent of potential dangers associated
Biological Safety Cabinet
Biological Safety Cabinet (Class I & Class II Type A2/B2, Class III) Senova Labtech (Shanghai) Co., Ltd. Class I Biological Safety Cabinet The Class I biological safety cabinet is an open-front negative
Cabinet Series. Maximize your lab space using our ideal heavy-duty steel constructed cabinets. Designed with use of our innovated ventilation system.
Maximize your lab space using our ideal heavy-duty steel constructed cabinets. Choose from a wide array of sizes, colors, and styles, along with various convenient accessories. Designed with use of our
Kamikaze Hot Plates Hot plates that heat when off or heat too much.
Kamikaze Hot Plates Hot plates that heat when off or heat too much. https://opexshare.doe.gov/lesson.cfm/2014/11/5/4604/deflagr ation-and-fire-from-malfunctioning-lab-stirrerhot-plate-part-2- Take-Note-The-dividends-from-simultaneous-excellence
On tool extraction kits. Simplifies keeping your workplace clean
On tool extraction kits Simplifies keeping your workplace clean A solution for every tool and application Nederman attachment kits for hand-held tools remove dust very efficiently during grinding, sanding,
Fortuna. Fortuna. »ScanLaf Probably the best in Class 1, Class 2 and Laminar flow technology.
LaboGene Scandinavian by Design. Fortuna Premier Vertical Flow Clean Air Cabinets Fortuna Premier Vertical Flow Clean Air Cabinets That sets the standards in quality, design, and innovation from a heritage
List of Harmonised Standards for EEE. Household and similar electrical appliances- Safety Part 1: General requirements
Updated on 13 November 2015 List of Harmonised Standards for EEE *or any newer edition No. Agreed edition* of IEC Standards for ASEAN Harmonization Standard Title Scope of Standard 1 IEC 60065 Ed.7.0(2001)
Amerimade RCA Wet Bench SOP Page 1 of 13 Rev /22/2014
Amerimade RCA Wet Bench SOP Page 1 of 13 Bench Features: Amerimade RCA Wet Bench SOP Tanks 1, 2 and 4 are dedicated to RCA Process (HF, SC1, SC2) batch/bulk cleans. All SC1/SC2 use of the bench will incur
Outlines. 1. Introduction of Safety at Laboratories. 2. Emergency Situations. 3. Basic Safety Rules for All the Labs (Engg.
Outlines 1. Introduction of Safety at Laboratories 2. Emergency Situations 3. Basic Safety Rules for All the Labs (Engg. And Science Labs) 4. Safety Rules for Engineering Labs I. Chemical Engineering Lab
EAST TENNESSEE STATE UNIVERSITY LABORATORY/CLINIC SAFETY INSPECTION PROGRAM
EAST TENNESSEE STATE UNIVERSITY LABORATORY/CLINIC SAFETY INSPECTION PROGRAM Scope: People who work in scientific laboratories are exposed to many potential hazards. Laboratories involve a greater variety
Fire/General Safety Review Program Key Performance Indicators Environmental Health and Safety
Fire/General Safety Review Program Key Performance Indicators Environmental Health and Safety Fire and CO Detection Systems Fire alarm pull station obstructed. Annunciation panel obstructed. Lack of approved
Science Department Safety Training Notes
SCIENTIFIC Science Department Safety Training Notes Discussion and Notes Five-Minute Safety Inspection Our Five-Minute Safety Equipment Inspection can be used to quickly and easily evaluate the readiness
LABORATORY SAFETY. Discipline of Metallurgy Engineering and Materials Science Indian Institute of Technology (IIT) Indore DECLARATION
LABORATORY SAFETY Discipline of Metallurgy Engineering and Materials Science Indian Institute of Technology (IIT) Indore DECLARATION I declare that I have read the safety guide of Discipline of Metallurgy
As a rule, UTMB employees are encouraged to implement the RACE acronym in the case of a fire. RACE is defined as the following:
Fire Safety Three elements are necessary to start a fire: heat, fuel and air (oxygen). If a fire is under way, removal of one element will bring the fire under control and make it extinguishable. Fire
Name Science Period 1
Name Science Period 1 Table of Contents Getting Started 3 Safety Symbols 4 Animal Safety 5 Aprons 5 Breakage 6 Corrosive 7 Disposal 8 Electric 8 Flame 9 Fumes 10 General Safety Awareness 10 Gloves 11 Goggles