(Toll Free); 7am-7pm Pacific Time, Monday-Saturday. Assembly instructions for: ST. ANTHONY S FACE TO FACE XL SWING

Transcription

1 (Toll Free); 7am-7pm Pacific Time, Monday-Saturday Assembly instructions for: ST. ANTHONY S FACE TO FACE XL SWING

2 FRAME QUANTY 4 Posts (A1, A2, A3 & A4) DRAWING 2 supports the frame (B1, B2) 2 Base support timbres (C1, C2) 1 Base support timber (D) 1 Roof support structure (E) 4 Seat supports (F1, F2, F3 & F4)

3 4 External frame cross supports (G1, G2, G3 & G4) 4 In-frame cross supports (H1, H2, H3 & H4) DESCRIPTION 1 Floor (I) DRAWING TWO BENCHES QUANTY 2 Seats (J1, J2) DRAWING 4 Seat side supports (K1, K2, K3 & K4) 4 Arms (L1, L2, L3 & L4) 4 supports (M1, M2, M3 & M4) 2 Backrests (N1, N2)

4 QUANTY 2 triangular pieces (O1, O2) DRAWING ROOF 2 Roof sections (P1, P2) 1 Slat (S) QUANTY DESCRIPTION 52 Bolts 3 ½ x 5/16 2 Bolts 4 x 5/16 8 Bolts 4 ½ x 5/16 12 Bolts 5 ½ x 5/16 4 Bolts 6 ½ x 5/16 8 Bolts 7 x 3/8 8 Bolts 10 x 3/8 6 Deck Screws 2 ½ x 8

5 CONTENT OF THE BOXES The parts that go together have the same numbers written next to the predrilled holes they attach to. Align the parts with the numbers as shown for ease of reference. STEP 1: Attach part A1 (post) to part B1 (support the frame), with three bolts (3 ½ x 5/16 ), washers & nuts (into three holes marched A1 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and STEP 2: Attach part A2 (post) to part B1 (support the frame), with three bolts (3 ½ x 5/16 ), washers & nuts (into three holes marched A2 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and Repeat these steps with other posts and support the frame

6 STEP 3: Attach part D1 (base support timber) to part C1 & C2 (base support timbres), with two bolts (4 x 5/16 ), washers & nuts (into two holes marched A7 & A8 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. STEP 4: Attach part A1 (post) to part C1 (base support timbre), with one bolt (5 ½ x 5/16 ), washer & nut (into hole marched A9 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. Repeat this step with all Post and base support timbers STEP 5: Attach part E (roof support structure) to part B1 (support the frame), with two bolts (10 x 3/8 ), washers & nuts (into two holes marched A5 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. STEP 6: Attach part E (roof support structure) to part B2 (support the frame), with two bolts (10 x 3/8 ), washers & nuts (into two holes marched A6 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten.

7 STEP 7: Attach part F1 (seat support) to part B1 & E (support the frame & roof support structure), with one bolt (10 x 3/8 ), washer & nut (into hole marched B1 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. Repeat this step with all Seat supports STEP 8: Attach part F1 (seat support) to part I (floor), with one bolt (6 ½ x 3/8 ), washer & nut (into hole marched B5 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. Repeat this step with all Seat supports STEP 9: Attach part J1 (seat) to part F1 (seat support), with two bolts (3 ½ x 5/16 ), washers & nuts (into two holes marched B9 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. STEP 10: Attach part J1 (seat) to part F2 (seat support), with two bolts (3 ½ x 5/16 ), washers & nuts (into two holes marched B10 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten.

8 STEP 11: Attach part K1 (seat side support) to part J1 (seat), with two bolts (3 ½ x 5/16 ), washers & nuts (into two holes marched B11 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. STEP 12: Attach part K2 (seat side support) to part J1 (seat), with two bolts (3 ½ x 5/16 ), washers & nuts (into two holes marched B12 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. STEP 13: Attach part L1 (arm) to part K1 & F1 (seat side support & seat support), with two bolts (3 ½ x 5/16 ), washers & nuts (into two holes marched B13 & X ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. STEP 14: Attach part L2 (arm) to part K2 & F1 (seat side support & seat support), with two bolts (3 ½ x 5/16 ), washers & nuts (into two holes marched B14 & X ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. STEP 15: Attach part M1 (support) to part K1 & F1 (seat side support & seat support), with two bolts (3 ½ x 5/16 ), washers & nuts (into two holes marched B15 & X ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. STEP 16: Attach part M2 (support) to part K2 & F2 (seat side support & seat support), with two bolts (3 ½ x 5/16 ), washers & nuts (into two holes marched B16 & X ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten.

9 STEP 17: Attach part N1 (backrest) to part K1 & K2 (seat side supports), with four bolts (3 ½ x 5/16 ), washers & nuts (into four holes marched B17 & X ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. Repeat the steps 9 to 17 in the other bench Bolt 3 ½ x 5/16 Bolt 5 ½ x 5/16 STEP 18: Attach part H1 (In-frame cross support) to part A1 & E (post & roof support structure), with two bolts, washers & nuts (into two holes marched A13 & X ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. Repeat this step with the other In-frame cross supports Bolt 7 x 3/8 Bolt 7 x 3/8 STEP 19: Attach part J1 (External frame cross support) to part A1 & B1 (post & supports the frame), with two bolts, washers & nuts (into two holes marched C3 & X ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly Repeat this step with the other External frame cross supports

10 STEP 20: Attach part O1 (triangular piece) to part A1 & B1 (post & supports the frame), with two bolts (5 ½ x 5/16 ), washers & nuts (into two holes marched C1 ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. Repeat this step with the other triangular piece STEP 21: Attach part P1 (Roof section) to part O1 & O2 (triangular pieces), with four bolts (4 ½ x 5/16 ), washers & nuts (into four holes marched C7 and X ). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten. Repeat this step with the other roof section Attach the slat with de roof six deck screws