State-of-the-art barn technology Developed in cooperation with farmers around the globe! NEW!

Size: px

Start display at page:

Download "State-of-the-art barn technology Developed in cooperation with farmers around the globe! NEW!"

Charles Rose
5 years ago
Views:

1 Engl. Arntjen Germany An excerpt from the Arntjen assortment State-of-the-art barn technology Developed in cooperation with farmers around the globe! NEW! Arntjen Germany Troughs GmbH Phone: +49 (0) info@arntjen.com Fax: +49 (0) Web: Online-Catalog on Arntjen Curtain-Systems Arntjen Doors Arntjen Lighting Ridges Arntjen-LED-LIGHT Oversized Fans 2,5-7m Comfort Beds NEW! NEW! NEW! Arntjen Troughs Calf Hutches Arntjen Stabling Slurry Mixers Scraper Systems +++ Freecall NEW!

2 GmbH Tel: +49 (0) Fax: +49 (0) info@arntjen.com Internet: +(00)-800-Arntjen-0 +(00) Curtain: opens from top to bottom Curtain Dual: opens top/bottom, shadow effect ISO Lift-Windows Fold up Door Ventilation/lighting ridge Ridge with Air flaps ISO-Lighting ridge M4 (DBGM) Type Germany Parlour Fan

Fax: +49 (0) 4402-9240 - 92 Internet: www.arntjen.com Arntjen Waterers The most affordable feed plenty of clean water for your cows!

After all, milk consists of 87% water! To produce 1 liter of milk, cows need 3 liters of water, or up to 4 liters in the summer time. This is equal to a volume of 80 to 170 liters per cow a day.

3 Fax: +49 (0) Internet: Arntjen Waterers The most affordable feed plenty of clean water for your cows! As any other animal, a dairy cow needs food and water in order to produce milk. While the more affordable resource, water should receive the same amount of attention as any ration of feed. After all, milk consists of 87% water! To produce 1 liter of milk, cows need 3 liters of water, or up to 4 liters in the summer time. This is equal to a volume of 80 to 170 liters per cow a day. If their water intake is restricted in any way, the cows will yield less milk! 2. Doors 3. Ridges/Lights Drinking as nature intended When the animal walks up to a waterer, it will immediately dip its planum nasolabiale into the water and suck noiselessly taking in the water in deep, long gulps. By setting up waterers for your cows you take a piece of nature to the cows in your shed. When drinking, the animals should stretch out their heads slightly forward. This can only be achieved by keeping the edge of the trough at a distance of no more than 80 cm above the area on which the cow is standing. As the water running into a small drinking dish fitted with a valve foams up, the cows are forced to swallow an unnecessary amount of air along with the water. This can be avoided by letting the animals drink from a standing water basin which gives them a certain distance to the valve. A water depth of at least 15 cm is required both to provide the required water quantity and keep the dirt accumulating at the bottom of the trough throughout the day from reaching the sucking planum nasolabiale. Regardless of these facts, all waterers should be cleaned on a daily basis. A trough length of 2 m allows several animals to drink at the same time. This corresponds to the natural behavior shown by herd animals. The cows should, however, not be allowed to drink the trough empty. A big floater valve, a 1 to 1½ inch feed line and a water pressure of 3-5 bar should, therefore, be present in order to achieve a water feed of 50 l/min. A known benchmark for determining the number and size of troughs to be installed in a shed is a trough space of 8-10 cm per cow. However, the quantity alone is not enough. The systematic arrangement and a well-organized distribution of the waterer spaces throughout the shed can improve accessibility also for lower-ranking animals. It is in the cow's nature to be lazy. The next trough should, therefore, not be further away than 15 meters. 10. Slurry mixers 9. Barn equipment 8. Calf hutch 7. Cow brush 6. Waterers 11. Pumps / scrapers further developments, improvements, Prices in uro plus taxes, EXW issued: waterers page 0 dimensions and prices are subject to change. 12. Special products

Fax: +49 (0) 4402-9240 - 92 Web: www.arntjen.

adjustable water level height - floater connection 1" (from the bottom) - large drain opening, Ø 150 mm with pipe nozzle - rubber plug stopper (protected from being pulled out by the animals) -

-30 C depending on the location) - 1" flow/heating pipeline - additional electric heating, provides protection up to approx.

4 Fax: +49 (0) Web: components Arntjen Quick-Drain Water Trough Model 2011 stainless steel - Water trough made of stainless steel - "rounded" face plates - outward canted trough plate (no dirt rims), easy to clean - adjustable water level height - floater connection 1" (from the bottom) - large drain opening, Ø 150 mm with pipe nozzle - rubber plug stopper (protected from being pulled out by the animals) - overflow connection - quick-lock/quick-release floater housing - Frost protection in 4 models: - 1" floater under water - US frost protection monitor, frost protection by running water (to approx. -30 C depending on the location) - 1" flow/heating pipeline - additional electric heating, provides protection up to approx. -20 The floater valves are suited for water supplied from the public water mains and domestic water that is not too abrasive or contains too much iron. Information hotline: Free call orddescription No. Arntjen Quick-Drain Waterer Model 2011/S - SH - for wall installation - trough bottom angled at 45 - with 1" floater - with 1" overflow connection - with rubber plug stopper, size 150 mm Additional equipment: - upright pipes with base plate - 1" flow/heating pipeline, welded in - and additional accessories Water trough 2011/S with 1" floater connection for frost protector and floater housing plus 8 cm, stainless steel Ext. length approx.: 112 cm s cm s cm s4031 Water connection from the top for type S waterers, through the floater housing, 1 pipe and 1 sealing cap, internal thread s6059 Water trough 2011/SH with flow/heating pipeline (welded in), see page 6.5 for necessary heaters, 1" floater, connection for frost protectors, floater housing plus 8 cm Ext. length approx.: 112 cm s cm s cm s4033 Set of upright pipes with base plate galv. s0249 (4 pcs.) with screws (stainless steel) Automatic frost protection monitor US s0392 unit with accessories Drain pipe elbow 1" 90º with nozzle, 1" nut s0101 and 1" gasket Brass ball valve 1" I/A Additional electric heating with accessories, can be mounted under the water trough (for necessary transformers, see page 6.5) for water trough 2011/S-SH External length ca. 112 /M6060/180W,24V " " " " 192 /M6061/180W/24V " " " " 242 /M6062/360W/24V Heating mounts for additional heating s0396 Teflon sealing tape for approx. 30 thread turns Check valve 1" 2x internal threads (application: 1x in feed line*, 1x in ring line) * necessary for mains connection Hose set for model 2011/S Connection 1": s0393 Hose nozzles, clamps and 1.50 m hose for pressures of up to 10 bar Pressure reducer, chromed brass, 2x internal threads in accordance with P-OT58 UNI,18/8A/5/304, (plastic housing) - primary pressure up to 15 bar - back pressure bar including pressure gauge 0-10 bar Connection ¾" s0203 Connection 1" s0204 further developments, improvements, Prices in uro plus taxes, EXW issued: waterers page 1 dimensions and prices are subject to change. 12. Special products 11. Pumps / scrapers 10. Slurry mixers 9. Barn equipment 8. Calf hutch 7. Cow brush 6. Waterers 3. Ridges/Lights 2. Doors

Arntjen Germany Tel: +49 (0) 4402-9240 - 0 Email: info@arntjen.com Fax: +49 (0) 4402-9240 - 92 Web: www.arntjen.com Item Arntjen water trough for wall installation Model 2016 stainless steel - available lengths 1.

12 meter trough proven to stand up to a stress test with more than 1,000 kg - splash guard on the wall - quick-lock/quick-release floater housing - large Ø 150 mm drain opening with pipe nozzle -

frost protection monitor, frost protection by running water (to approx. -30 C depending on the location) - 1" flow/heating pipeline - additional electric heating, provides protection up to approx.

Recommended dimensions and technical specifications without obligation Infoline: Free call Item Description no.

equipment: - flow/heating pipeline 1" welded in - see below for additional accessories Water trough 2016W/S with 1" floater Connection for frost protectors, floater housing plus 8 cm, stainless steel

: 112 cm s4017 212 cm s4018 312 cm s4019 412 cm s4020 Water connection from the top for type S waterers, through the floater housing, 1 pipe and 1 sealing cap, internal thread s6059 Water trough

5 for necessary heaters with 1" floater Connection for frost protectors, floater housing plus 8 cm, stainless steel : 112 cm s4021 212 cm s4022 312 cm s4023 412 cm s4024 Mounting hardware, with: M12

monitor US unit s0392 with accessories Drain pipe elbow 1" 90º with nozzle, 1" nut and s0101 1" gasket Brass ball valve 1" I/A 05474 Additional electric heating with accessories, can be mounted under

5 Arntjen Germany Tel: +49 (0) info@arntjen.com Fax: +49 (0) Web: Item Arntjen water trough for wall installation Model 2016 stainless steel - available lengths 1.12 / 2.12 / 3.12 / 4.12 meters - feed line from the bottom or the top - sturdy wall mount: 2.12 meter trough proven to stand up to a stress test with more than 1,000 kg - splash guard on the wall - quick-lock/quick-release floater housing - large Ø 150 mm drain opening with pipe nozzle - rubber plug stopper: protected from being pulled out by the animals - beveled edges: minimum risk of injury - no dirt rims easy to clean - Frost protection in 4 models: - 1" floater under water - US frost protection monitor, frost protection by running water (to approx. -30 C depending on the location) - 1" flow/heating pipeline - additional electric heating, provides protection up to approx. -20 The floater valves are suited for water supplied from the public water mains and domestic water that is not too abrasive or contains too much iron. Recommended dimensions and technical specifications without obligation Infoline: Free call Item Description no. Arntjen water trough for wall installation Models 2016W/S - SH - trough bottom angled at 45 - with 1" floater - with 1" overflow connection - with rubber plug stopper, size 150 mm Additional equipment: - flow/heating pipeline 1" welded in - see below for additional accessories Water trough 2016W/S with 1" floater Connection for frost protectors, floater housing plus 8 cm, stainless steel External length approx.: 112 cm s cm s cm s cm s4020 Water connection from the top for type S waterers, through the floater housing, 1 pipe and 1 sealing cap, internal thread s6059 Water trough 2016W/SH with flow/heating pipeline (welded in) see page 6.5 for necessary heaters with 1" floater Connection for frost protectors, floater housing plus 8 cm, stainless steel External length approx.: 112 cm s cm s cm s cm s4024 Mounting hardware, with: M12 stainless steel threaded rods, stainless steel lock nuts and washers for 112 cm and 212 cm water troughs s4025 for 312 cm water trough s4026 for 412 cm water trough s4027 Automatic frost protection monitor US unit s0392 with accessories Drain pipe elbow 1" 90º with nozzle, 1" nut and s0101 1" gasket Brass ball valve 1" I/A Additional electric heating with accessories, can be mounted under the water trough (for necessary transformers, see sheet 6.5) for water trough 2016W/S-SH Exterior length 112 /M6060/180W, 24V " " " 212 /M6061/180W, 24V " " " 312 and 412 /M6062/360W, 24V Heating mount for additional heating s4028 Teflon sealing tape for approx. 30 thread turns Check valve 1" * necessary for mains connection Hose set for model 2016W/S s0393 Connection 1": Hose nozzles, clamps and 1.50 m hose for pressures of up to 10 bar Pressure reducer, chromed brass, - primary pressure up to 15 bar - back pressure bar including pressure gauge 0-10 bar Connection ¾" Connection 1" s0203 s0204 Further development as well as design Prices in uro excluding VAT ex works Last update: waterers page 1.1 and price changes are reserved. 12. Special products 11. E-pumps/manure removal 10. Slurry mixers 9. Barn equipment 8. Calf hutches 7. Cow brushes 6. Waterers 5. Floor coverings 3. Lighting ridge/lights 2. Doors 1. Curtain

Fax: +49 (0) 4402-9240 - 92 Internet: www.arntjen.com components with floor mounts valve 1 brass autom. frost free valve 1 (US-unit good to -30 ) Ball float valve 1" incl.

Bracket for extra filament heater for after mounting (Nirosta) description Arntjen comforttrough model 2003/K - Made of stainless steel - Tip-trough - Trough bottom 45 inclined Trough 2003/K with tip

/h, 3-5 bar pressure with fittings of brass connection at 1" outside thread incl. flat stainless steel float cover Valve 1" brass app. 9.000 L.

higher stainless steel float cover Flexible float set 2003/K: connection 1": 90 angle, tube clamps and 1,50 Meter tube good to 10 bar pressure Accessories for troughs: Outlet angle 1" 90º with clamp,

6 Fax: +49 (0) Internet: components with floor mounts valve 1 brass autom. frost free valve 1 (US-unit good to -30 ) Ball float valve 1" incl. ball and rod Valves are suitable for water from local supplies. Avoid too high contents of lime and iron. Bracket for extra filament heater for after mounting (Nirosta) description Arntjen comforttrough model 2003/K - Made of stainless steel - Tip-trough - Trough bottom 45 inclined Trough 2003/K with tip rod outside app.120 cm, inside: 100 cm outside app.220 cm, inside: 200 cm 1 set wall mounts galv. 1 set floor mounts galv. Valve 1" brass app L./h, 3-5 bar pressure with fittings of brass connection at 1" outside thread incl. flat stainless steel float cover Valve 1" brass app L./h, 3-5 bar pressure automatic frost free valve (US-unit good to 30 C) in this arrangement with fittings of brass connection at 1" outside thread incl. higher stainless steel float cover Flexible float set 2003/K: connection 1": 90 angle, tube clamps and 1,50 Meter tube good to 10 bar pressure Accessories for troughs: Outlet angle 1" 90º with clamp, nut 1" and sealing washer 1" Hardware for wall mounts including: 2 thread rods 12 mm / 1 m 12 nuts M12 12 washers M12 Hardware for floor mounts on concrete (8 anchors 12x113): anchors 12 x 113mm piece anchors 12 x 113mm set of 25 Hardware for floor mounts on slatted floors: T-bolts stainl.steel with nut piece ord- No. s4034 s0235 s0205 s0206 s0231 s0233 s0202 s0101 s0114 s s0670 s Heat pipe with 1" valve underwater plus 8 cm for trough length 118 cm s0276 " " " 200 cm s0277 " " " 250 cm s0278 Extra filament heater 80 W/24V Heater bracket for trough 2003/K s0279 Necessary transformer see page Pumps / scrapers 10. Slurry mixers 9. Barn equipment 8. Calf hutch 7. Cow brush 6. Waterers 3. Ridges/Lights 2. Doors further developments, improvements, Prices in uro plus taxes, EXW issued: Waterers page 2 dimensions and prices are subject to change. 12. Special products

Germany Fax: +49 (0) 4402-9240 - 92 Internet: www.arntjen.

Application: in areas with heavy frosts, inside and outside of the shed.

Watermatic 100 OmniFount 3/2 Frost protection (varies with use/flow): Watermaster/Watermatic without heating -3 to -7 C after ~ 6 hours, exterior ice formation Watermaster/Watermatic with heating -7

96/90 description ISO water troughs Watermaster waterers double-walled insulation, including floater valve, supply tube, drain plug, sealing tape Floater: 60-75 ltr./min at 3.

61 m x H. 0.61 m Capacity: 227 liters Watermaster 600 for 25-30 cows L. 1.83 m x W. 0.61 m x H. 0.61 m Capacity: 106 liters Watermaster 96 1 for 40-50 cows L. 2.44 m x W. 0.84 m x H. 0.56 m Capacity: 284 liters Especially for lower water pressures in connection with valve insert red Watermaster 90 1 for 35-40 cows L.

0,56 m Capacity: 68 liters Watermatic waterers double-walled insulation, including floater valve, supply tube, drain plug, sealing tape Floater: 60-75 ltr./min at 3.

7 Germany Fax: +49 (0) Internet: components ISO water trough Double-walled, insulated trough waterer made of highquality polyethylene for dairy cows, feeder cattle, and calves. Application: in areas with heavy frosts, inside and outside of the shed. Warranty granted on polyethylene troughs: 5-year comprehensive warranty, 5 years of additional warranty (proportionally reduced by 20% per year) Watermaster 1200 Watermaster 600 Watermatic 300/150 Watermatic 100 OmniFount 3/2 Frost protection (varies with use/flow): Watermaster/Watermatic without heating -3 to -7 C after ~ 6 hours, exterior ice formation Watermaster/Watermatic with heating -7 to -10 C remains ice-free, external rim of ice -30 C 60 cm ice-free next to the heating OmniFount 3 (always includes heating) -30 C no ice formation, no service necessary OmniFount 1 Watermaster 96/90 description ISO water troughs Watermaster waterers double-walled insulation, including floater valve, supply tube, drain plug, sealing tape Floater: ltr./min at 3.5 bar Watermaster 1200 for cows One side lockable, higher flow on the open side provides even greater frost protection L m x W m x H m Capacity: 227 liters Watermaster 600 for cows L m x W m x H m Capacity: 106 liters Watermaster 96 1 for cows L m x W m x H m Capacity: 284 liters Especially for lower water pressures in connection with valve insert red Watermaster 90 1 for cows L m x W m x H m Capacity: 114 liters Watermaster 54 1 L. 1,37 m x B. 0,84 m x H. 0,56 m Capacity: 68 liters Watermatic waterers double-walled insulation, including floater valve, supply tube, drain plug, sealing tape Floater: ltr./min at 3.5 bar Watermatic 300 for cows L m x W m x H m Capacity: 31 liters Watermatic for cows L m x W m x H m Capacity: 16 liters For the repro and calving barn Watermatic for 5-10 cows L m x W 0.36 m x H m Capacity: 11 liters For the repro and calving barn ord- No OmniFount 240 Volt waterers double-walled insulation, with stainless steel insert and heating (thermostatcontrolled, heating elements and heating cable for supply tube), including floater valve, supply tube, drain plug, sealing tape Floater: ltr./min at 3.5 bar OmniFount 3 / 240 Volt for cows 650 watts, capacity: 38 liters L m x W m X H m OmniFount 2 / 240 Volt cows watts, capacity: 8 liters L m x W m x H m For the repro and calving barn OmniFount 1 / 240 Volt cows watts, capacity: 6 liters L m x W m x H m For the repro and calving barn 1) Available ex works, take longer delivery period into consideration. Further development as well as design Prices in uro plus taxes, EXW issued: Waterers page 3 and price changes are reserved. 12. Special products 11. Pumps / scrapers 10. Slurry mixers 9. Barn equipment 8. Calf hutch 7. Cow brush 6. Waterers 3. Ridges/Lights 2. Doors

Fax: +49 (0) 4402-9240 - 92 Internet: www.arntjen.com components Immersion Heater Thermal Tube Heat Cable Float with valve Valve including insert 2.7-4.

7 bar (order separately) (included) description ISO watertroughs Accessories for Watermaster and Watermatic Immersion Heater 240V/500W Thermostat

cable and plug to lay in the float housing Heat Cable 240V/500W Thermostat regulated, length 1,80 m Accessories for all types Thermal Tube 1,2 m Top For

through the frost zone outer diameter 30 cm inner 20 cm Float with valve (ball, arm, valve) ¾" plastic Valve inlet red for 2,7-4,1 bar water pressure,

8 Fax: +49 (0) Internet: components Immersion Heater Thermal Tube Heat Cable Float with valve Valve including insert bar bar (order separately) (included) description ISO watertroughs Accessories for Watermaster and Watermatic Immersion Heater 240V/500W Thermostat regulated, incl. cable and plug to lay in the float housing Heat Cable 240V/500W Thermostat regulated, length 1,80 m Accessories for all types Thermal Tube 1,2 m Top For water supply line from bottom through the frost zone outer diameter 30 cm inner 20 cm Thermal Tube 0,6 m Extension For water supply line from bottom through the frost zone outer diameter 30 cm inner 20 cm Float with valve (ball, arm, valve) ¾" plastic Valve inlet red for 2,7-4,1 bar water pressure, flow volume: 75 l/min at 3,5 bar Valve inlet green for 4,1 5,7 bar water pressure, flow volume: 60 l/min at 3,5 bar ord- No Waterers 3. Ridges/Lights 2. Doors 11. Pumps / scrapers 10. Slurry mixers 9. Barn equipment 8. Calf hutch 7. Cow brush further developments, improvements, Prices in uro plus taxes, EXW issued: waterers page 4 dimensions and prices are subject to change Special products

Tel: +49 (0) 4402-9240 - 0 Email: info@arntjen.com Fax: +49 (0) 4402-9240 - 92 Web: www.arntjen.com Item ISO water troughs (Plastic drinking troughs) Recommended dimensions and technical specifications without obligation.

9 Tel: +49 (0) info@arntjen.com Fax: +49 (0) Web: Item ISO water troughs (Plastic drinking troughs) Recommended dimensions and technical specifications without obligation. Double-walled, insulated trough waterer made of highquality polyethylene for dairy cows, feeder cattle, and calves. Application: in areas with heavy frosts, inside and outside of the barn. Warranty for polyethylene trough: 5-year comprehensive warranty, 5 years of additional warranty (proportionally reduced by 20% per year) Warranty for stainless steel insert: 10-year full warranty CattleMaster Infoline: Free call Description ISO water troughs (Plastic drinking troughs) CattleMaster waterer 240 Volt double-wall insulation with stainless steel insert and heating (thermostat-controlled heating elements directly under the stainless steel trough and heating cable for float valve and supply cable) incl. float valve, supply hose, drain plug, sealing tape Float: l/min at 3.5 bar CattleMaster 1440 / 240 Volt watts, capacity: 227 liters L m x W m x H m CattleMaster 840 / 240 Volt watts, capacity: 132 liters L m x W m x H m CattleMaster 480 / 240 Volt watts, capacity: 76 liters L m x W m x H m Spare parts for ISO water troughs For Watermaster / Watermatic models Partition double-nipple elbow for Watermaster Drain plug for Watermaster and Watermatic all models Silicone drain plug (in float housing) for Watermaster M600, 54D, 96 Item no. Further development as well as design Prices in uro excluding VAT ex works Last update: Waterers Sheet 4.1 and price changes are reserved For OmniFount / CattleMaster models Drain plug for OmniFount Drain plug for CattleMaster Heating element 300W / 240V Heating cable 48W / 240V Valve holder Thermostat ) Available ex works, take longer delivery period into consideration. 12. Special products 12. Special products 11. E-pumps/manure 10. Slurry removal mixers Slurry Barn mixers equipment 9. Barn 8. Calf equipment hutches Cow Calf brushes hutches Cow Waterers brushes 6. Waterers 5. Floor coverings 5. Floor 4. coverings Fans 3. Lighting ridge/lights 2. Doors 2. Doors 1. Curtain 1. Curtain 3. Lighting ridge/lights 11. E-pumps/manure removal

Fax: +49 (0) 4402-9240 - 92 Internet: www.arntjen.com Transformers components Heater Mod. 303 valve drinker model 500 Heater Mod. 312 float-drinker model 600 double-valve-drinker mod.

Drinkers and accessories Valve drinker and model 500 02728 to mount at wall or tube, water inlet up to 30 L/min.

500 02729 (Trafos see below) Frost protection heating line 2m, 03604 20 watts, 24 volts for heating the branch line (steel pipe) Float-drinker model 600 03605 made of stainless steel, with

water inlet up to 5 bar, to mount at wall or tube with flow-throughconnection right and left R ¾", with big outlet Double-valve-drinker model 620 03606 made of stainless steel, with water

600 03607 and 620 (only 1 for each) Frost protection heating line 2m, 03604 20 watts, 24 volts for heating the branch line (steel pipe) Transformer 230 V./24 V.

/200 Watt 02731 Transformer 230 V./24 V.

303 02725 thermostatically controlled, used to frostprotect the water contained in insulated ring lines with a maximum length of 150 m (1/2" or 3/4"), including circulating pump (230V/100W),

10 Fax: +49 (0) Internet: Transformers components Heater Mod. 303 valve drinker model 500 Heater Mod. 312 float-drinker model 600 double-valve-drinker mod. 620 Frost protection heating line Frost protection thermostat Heater Mod. 311 orddescription No. Drinkers and accessories Valve drinker and model to mount at wall or tube, water inlet up to 30 L/min., connection at right side with thread R 3/4", all parts made of stainless steel or brass Heating 80W, 24V for mod (Trafos see below) Frost protection heating line 2m, watts, 24 volts for heating the branch line (steel pipe) Float-drinker model made of stainless steel, with valve for 50 L/min. water inlet up to 5 bar, to mount at wall or tube with flow-throughconnection right and left R ¾", with big outlet Double-valve-drinker model made of stainless steel, with valve for 50 L/min. water inlet up to 5 bar, with wall mounts and, flow-through-connection R ¾", with 2 big outlets Heating 80 Watt, 24 Volt for mod and 620 (only 1 for each) Frost protection heating line 2m, watts, 24 volts for heating the branch line (steel pipe) Transformer 230 V./24 V./100 Watt Transformer 230 V./24 V./200 Watt Transformer 230 V./24 V./400 Watt Frost protection thermostat, model for automatically switching transformers with a maximum of 16A / 230 volts on and off Heating Unit 3,000 W / 230 V Mod thermostatically controlled, used to frostprotect the water contained in insulated ring lines with a maximum length of 150 m (1/2" or 3/4"), including circulating pump (230V/100W), mounted ready for connection on the base plate, with pressure relief valve, bleeder valve, and non-return valve, check valve (requires 30 ma ground fault circuit interrupter) Heating Unit 3,000 W / 400 V Mod thermostatically controlled, used to frostprotect the water contained in insulated ring lines with a maximum length of 250 m (1/2" or 3/4"), including highperformance circulating pump (230V/400W), mounted ready for connection on the base plate, with pressure relief valve, bleeder valve, and non-return valve, check valve (requires two 30 ma ground fault circuit interrupters) Heating Unit 6,000 W / 400 V Mod same as Mod. 311, with two 3,000 W heating rods for ring lines with a maximum length of 350 m further developments, improvements, Prices in uro plus taxes, EXW issued: waterers page 5 dimensions and prices are subject to change. 12. Special products 11. Pumps / scrapers 10. Slurry mixers 9. Barn equipment 8. Calf hutch 7. Cow brush 6. Waterers 3. Ridges/Lights 2. Doors

Fax: +49 (0) 4402-9240 - 92 Internet: www.arntjen.

Drinkers and accessories Drinker model 370 for calves, sheep,

placed in a corner, connection R ½" from top, cup ord- No.

1"-11/2" 03609 Drinker model 115 02723 big enameled cup and

clamp for R1 ¼" 2" 02724 3. Ridges/Lights 2.

drinker modell 43 A thermo pipes Stainless steel waterer model

and the bottom ½" brass pipe valve 03414 ¾" stainless steel

connection R ½" from bottom, heating power 80 Watt, 24 Volt

43 A heatable, with 04635 float valve Cast iron cup, enameled,

41 A, 43 A daylight 400 mm Mod. 344 04636 daylight 600 mm Mod.

345 (additional 04638 300mm to concrete-cast) 8. Calf hutch 7.

Waterers Transformer drinker model 46 Frost protection heating

mount at wall or tube, tube valve, external water regulation,

protection-heating wire 2 m, 20 Watt, 24 V, to heat steel tube

W 2 drinker Transformer 230/24 V, 400 W 4 drinkers Frost

389 for automatically on- and offswitch of the transformers up

11 Fax: +49 (0) Internet: components drinker model 370 drinker model 115 description Drinkers and accessories Drinker model 370 for calves, sheep, easy opening tube valve with water regulation, can also be placed in a corner, connection R ½" from top, cup ord- No of cast iron, completely enameled U-bolts for tube 1"-11/2" Drinker model big enameled cup and water regulation, connection R1/2" from top and bottom Double clamp for R1 ¼" 2" Ridges/Lights 2. Doors Stainless steel drinker model 1200 drinker model 41 A drinker modell 43 A thermo pipes Stainless steel waterer model 1200 with brass connecting bracket, connection from the top and the bottom ½" brass pipe valve ¾" stainless steel pipe val ve Fastening bracket for R 11/2" 2" pcs required Drinker Mod. 41 A heatable, Cup aus cast iron, enameled inside, connection R ½" from bottom, heating power 80 Watt, 24 Volt Drinker Mod. 43 A heatable, with float valve Cast iron cup, enameled, connection R ½" from bottom, heating power 80 Watt, 24 Volt Thermo pipes, thick-walled isolated for mount at base for Mod. 41 A, 43 A daylight 400 mm Mod daylight 600 mm Mod daylight 800 mm Mod. 345 (additional mm to concrete-cast) 8. Calf hutch 7. Cow brush 6. Waterers Transformer drinker model 46 Frost protection heating line Frost protection thermostat model 389 Drinker Mod. 46 heated, to mount at wall or tube, tube valve, external water regulation, cast iron cup, enameled inside, connection R ½" from top and bottom, heating power 80 Watt, 24 V. Fastening bracket for tube 2"-3", 2x required Frost protection-heating wire 2 m, 20 Watt, 24 V, to heat steel tube Transformer 230/24 V,100 W 1 drinker Transformer 230/24 V, 200 W 2 drinker Transformer 230/24 V, 400 W 4 drinkers Frost protection-thermostat, Mod. 389 for automatically on- and offswitch of the transformers up to max. 16A / 230 Volt further developments, improvements, Prices in uro plus taxes, EXW issued: waterers page 6 dimensions and prices are subject to change Special products 11. Pumps / scrapers 10. Slurry mixers 9. Barn equipment

12 Arntjen Germany GmbH Tel: +49 (0) Fax: +49 (0) info@arntjen.com Internet: +(00)-800-Arntjen-0 +(00) Arntjen Fresh Fresh Air Fan Fans Free stalls for cows Diagonal Head Rail for Calves, Heifers and Cows Roll-Mat for free stalls Large Selection of Slurry Mixers Trough with big outlet Heater for troughs

13 Arntjen equipment for Dairy Barns Curtain Systems Rubber Flooring Arntjen Stabling Oversized Fans 2.5-7m Arntjen Troughs Slurry Mixer* Arntjen Lighting Ridges First Class Cow/Calf Brush Submersible Slurry Mixer* Slurry Scraper Systems* Calf Hutches Arntjen Internet *) not included, ask for extra information Your Dealership for Arntjen Products: Freecall Arntjen North America Inc. Rural Route #1, Innerkip, Phone: (519) Ontario N0J 1M0, CAN Toll-free hotline / Freecall: arntjen@agronoma.com Fax: (519) Internet: BI

Product-Catalogue 2015

Engl. Arntjen Germany og on m al.co t Ca en tj eil n arn. n O ww Product-Catalogue 2015 w h s re F n e j t rn s n a F r Ai State-of-the-art barn technology Developed in cooperation with farmers around