PureFlow. PureFlow. Fittings system This section doesn t meet California AB1953, Vermont ACT 193 and NSF 61 Annex G Standards.

Transcription

1 Fittings system This section doesn t meet California AB1953, Vermont ACT 193 and NSF 1 Annex G Standards. 11

2 PEX Manifold Plumbing Systems # of Outlets: Dimension (hot,cold) MANABLOC -BRONZE PEX PRESS Bronze MANABLOC's provide a homerun distribution manifold for the plumbing system. These MANABLOCs utilize 3/8" or 1/" distribution lines. Each MANABLOC comes factory pre-assembled with color coded hot and cold ports. All Bronze MANABLOCs include port Press connections, drill templates, instruction guide, faceplate and port labels. Supply connections and mounting straps need to be ordered separtately. model V ports: 3/8 (,8) 1 14 ports: 1/ (,8) 1 4 ports: 1/ (9,15) 1 30 ports: 1/ (1,18) 1 3 ports: 1/ (14,) # of Outlets: Dimension (hot,cold) COMBINATION MANABLOC -BRONZE PEX PRESS Bronze MANABLOC's provide a homerun distribution manifold for the plumbing system. These MANABLOCs combine 1/" and 3/8" distribution lines to provide optimum water savings by providing enough water to specifically meet the fixture requirements. Some also come with special configurations for homes with water softeners. Each MANABLOC comes factory preassembled with color coded hot and cold ports. All Bronze MANABLOCs include port Press connections, drill templates, instruction guide, faceplate and port labels. Supply connections and mounting straps need to be ordered separately. model V ports: 3/8 (7,11) & 1/ (,4) 1 ports: 3/8 (7,11) & 1/ (3,5) 1 30 ports: 3/8 (10,1) & 1/ (,) 1 3 ports: 3/8 (11,15) & 1/ (3,7) # of Outlets: Dimension MINIBLOC -BRONZE PEX PRESS Bronze MINIBLOCs provide a zone manifold for the plumbing system. These MINIBLOCs use either 3/8" or 1/" distribution lines. All Bronze MINIBLOCs include port Press connections, drill templates, instruction guide, faceplate and port labels. Supply connections need to ordered separately / x 3 1 1/ x 4 1 1/ x 5 1 1/ x 1 1/ x 8 1 1/ x NOTE: The part number to the right represent all blue valves. Red valve caps are included to designate hot water lines. model V

3 x MANABLOC Port PEX PRESS PORT ADAPTER This adapter connects to the distribution ports on a MANABLOC or a MINIBLOC and allows you to connect to ViegaPEX or FostaPEX tubing using a Bronze connection (nut included). model V /8 x 1/ 1/ x 1/ PORT REPLACEMENT NUT This replacement nut is used to connect a port adapter to the distribution port on a MANABLOC. model V / Port Replacement Nut 0. x MANABLOC Supply PEX PRESS SUPPLY ADAPTERS These fittings connect the supply lines to the MANABLOC or MINIBLOC. They allow you to easily connect ViegaPEX or FostaPEX tubing to the MANABLOC or MINIBLOC with Bronze connections (nut included). model 878.8NG /4 x ProPress x MANABLOC Supply PROPRESS MANABLOC SUPPLY ADAPTERS model

4 ADDITIONAL MANABLOC SUPPLY ADAPTERS These fittings connect the supply lines to the MANABLOC or MINIBLOC. They allow you to transition easily from a variety of types of service line connections to the MANABLOC or MINIBLOC. COMPRESSION model V Connection x MANABLOC Supply M NPT model V

5 Fittings Fittings 15

6 Fittings x C BRONZE PEX PRESS PROPRESS ADAPTERS Use these adapters to transition directly from ViegaPEX or FostaPEX to copper tubing. Press fittings make flameless plumbing and hydronic heating connections fast and simple. The ProPress tool, available through Ridge Tool distribution, is required for the copper connection. ProPress is compatible with type K, L and M copper tubing only. model 813PNG / x 1/ 5 1/ x 3/4 5 3/4 x 1/ 5 1 1/4 x 1 1/ / x 1 1/ x Copper (female) BRONZE PEX PRESS COPPER TUBING ADAPTERS Use copper tubing adapters to make a PEX Press connection between ViegaPEX or FostaPEX tubing and standard copper tubing. Adapters solder over copper tubing. model 813.5NG /8 x 1/ 5 1/ x 1/ 5 1/ x 3/4 5 3/4 x 1/ 5 1 1/4 x 1 1/ / x 1 1/ PEX x Copper (male) BRONZE PEX PRESS COPPER FITTING ADAPTERS Use copper fitting adapters to make connections between ViegaPEX or FostaPEX tubing and copper fittings. Adapters fit into solder cup or ProPress fittings. model 813.1NG / x 1/ 5 1/ x 3/4 5 3/4 x 1/ 5 1 1/4 x 1 1/ / x 1 1/ PEX x Copper BRONZE PEX PRESS COPPER TUBING ELBOWS 90 elbows connect ViegaPEX or FostaPEX tubing to copper tubing. Bronze fittings make baseboard and plumbing connections fast and simple. Sweat elbow fits over standard copper tubing or baseboard. BRONZE PEX PRESS FEMALE COPPER TUBING ELBOWS model 814.5NG / x 3/ Bronze Pex Press Male Copper Fitting Elbows model 814.NG / x 1/ Bronze Pex Press Male or Female Copper Fitting or Tubing Elbows / x 3/4 or 1/ 5 3/4 x 3/4 or 1/ model 814.7NG 1

7 x M NPT BRONZE PEX PRESS MALE NPT ADAPTERS Use male adapters to make a connection between ViegaPEX or FostaPEX tubing and a female NPT thread. model 811NG /8 x 1/ 5 1/ x 1/ 5 1/ x 3/4 5 3/4 x 1/ 5 3/4 x 1 1/4 1 x 3/4 5 1 x 1 1/4 1 1/4 x 1 1/4 1 1/ x 1 1/ x M NPT BRONZE PEX PRESS MALE NPT ELBOWS Use male NPT threaded elbows to make a 90º connection between ViegaPEX or FostaPEX tubing and a female NPT thread. model 814NG / x 1/ 5 1/ x 3/4 5 3/4 x 1 1/4 1 x 1 1/4 1 1/4 x 1 1/ x F NPT BRONZE PEX PRESS FEMALE NPT ADAPTERS Use female adapters to make a connection between ViegaPEX or FostaPEX tubing and a male NPT thread. model 81NG / x 1/ 5 1/ x 3/4 5 3/4 x 1/ 5 1 x 3/ x BRONZE PEX PRESS COUPLINGS Use these couplings to connect two sections of ViegaPEX or FostaPEX tubing with the PEX Press connection. Use to repair damaged sections or connect long runs. model 815NG /8 5 1/ 5 1/ x 3/4 5 3/4 5 3/4 x 1 1/ x 1 1/4 5 1 x 1 1/ 5 1 1/ /4 x 1 1/ 5 1 1/ 5 1 1/ x 3/ x PB BRONZE PEX PRESS PB ADAPTERS Use these adapters for making repairs to existing polybutylene plumbing systems. Adapters join ViegaPEX or FostaPEX tubing to PB tubing. Both connections use Viega press tooling. model 813.NG / x 1/

8 x BRONZE PEX PRESS ELBOWS Use elbows for making 90 connections in ViegaPEX or FostaPEX runs. model 81NG / 5 3/ / / x x BRONZE PEX PRESS TEES Use these tees to join ViegaPEX or FostaPEX tubing. Dimensions are listed as labeled, A x B x C. model 818NG / 5 1/ x 3/8 x 3/8 5 1/ x 1/ x 3/4 5 3/4 5 3/4 x 1/ x 1/ 5 3/4 x 1/ x 3/4 5 3/4 x 3/4 x 1/ x 1/ x 1/ 5 1 x 1/ x x 3/4 x 1/ 5 1 x 1 x 1 x 1 x 1/ 5 1 x 1 x 3/ / /4 x 1 x 3/ /4 x 1 1/4 x 1 1/4 x 3/ /4 x 1 1/4 x / 5 1 1/ x 1 x 3/ / x 1 1/ x 1 1/ x 3/ / x 1 1/ x / x 1 1/ x 1 1/ BRONZE PEX PRESS TEST PLUGS Use plugs to cap ViegaPEX or FostaPEX tubing with a connection for pressure testing or at dead ends. model 85NG /8 5 1/ 5 3/ x F NPT BRONZE PEX PRESS DROP EAR ELBOWS Drop ear elbows provide a secure connection with a female NPT thread exiting a wall or floor at a 90 angle. model 85.5NG /8 x 1/ 5 1/ x 1/ 5 3/4 x 1/

9 BRONZE PEX PRESS FEMALE NPT FIRE SPRINKLER ADAPTERS Use female adapters to make a connection between ViegaPEX Ultra Black tubing and a standard 1/" male NPT sprinkler head. model 81.NG x F NPT 843 3/4 x 1/ x F NPT BRONZE PEX PRESS FIRE SPRINKLER DROP EAR ELBOWS & ANGLED ADAPTER Drop ear fire sprinlker elbows make a single connection of ViegaPEX Ultra Black tubing to a standard 1/" male NPT sprinkler head while the angled adapter (844) connects two ViegaPEX tubes at 90º on a wall or ceiling surface. model 814.NG /4 x 1/ 1 3/4 x 3/4 x 1/ 1 1 x 1/ x x F NPT BRONZE PEX PRESS FEMALE NPT BRANCH FIRE SPRINKLER TEE (H) These Branch fire sprinkler tees are designed to be mounted to a horizontal surface and join ViegaPEX Ultra Black tubing to a standard 1/" male NPT residential sprinkler head. model 818.NG /4 x 3/4 x 1/ 1 1 x 3/4 x 1/ 1 1 x 1 x 1/ x x F NPT BRONZE PEX PRESS FEMALE NPT BRANCH FIRE SPRINKLER TEE (V) These Branch fire sprinkler tees are designed to be mounted to a vertical surface and join ViegaPEX Ultra Black tubing to a standard 1/" male NPT residential sprinkler head. model 818.3NG /4 x 3/4 x 1/ 1 1 x 3/4 x 1/ 1 1 x 1 x 1/

10 PEX PRESS SLEEVES These stainless steel sleeves provide a secure press fit for the Viega system. The view hole can be used to verify full tubing insertion. Use only with Viega fittings and tools. model / / 100 5/ / / / PEX PRESS COPPER TUB ELS Copper tub els allow ViegaPEX or FostaPEX runs to easily transition into tub and shower valves. model 80.0US x Copper (Length) 0 1/ x 1/ (3 x ) x Copper (Length) PEX PRESS COPPER STUB-OUT ELBOWS Copper stub-outs transition ViegaPEX or FostaPEX tubing to copper for termination at the wall. model 80.1US /8 x 1/ (3.5 x 8) 5 1/ x 1/ (3.5 x 8) 5 3/4 x 3/4 (3.5 x 8) x Copper (Length) PEX PRESS COPPER STRAIGHT STUB- OUTS These copper stub-outs transition ViegaPEX or FostaPEX tubing to copper with a Bronze PEX Press fitting. model 80.US / x 1/ (8) 5 1/ x 1/ (15) PEX PRESS COPPER TEE STUB-OUT Copper Stub-Out Tee transitions ViegaPEX or FostaPEX tubing to copper for termination at the wall maintaining a low profile flow through type installation. model 80.3US x Copper (Length) 300 1/ x 1/ x 1/ (8) 5 170

11 PEX PRESS WASHING MACHINE OUTLET BOX Wall mounted box for hot and cold washing machine connections. 1/4 turn 1/" valves with color coded handles included. model 87.1US Valve / Valve PEX PRESS ICE MAKER OUTLET BOX Wall mounted box for ice maker connection. 1/4 turn valve included. model 87.0US /8 1 1/ OX BOX PEX PRESS WASHING MACHINE OUTLET BOX Wall mounted box for hot and cold washing machine connections. 1/4 turn 1/" valves with color coded handles included. PATENT PENDING model 87.3US Valve / 1.34 Valve OX BOX PEX PRESS ICE MAKER OUTLET BOX Wall mounted box for ice maker connection. 1/4 turn valve included. PATENT PENDING model 87.5US BRONZE PEX PRESS LAV ADAPTERS Connect ViegaPEX or FostaPEX tubing directly to faucets with these adapters. model /8 1 1/ 1 x Lav (metal nut) 3/8 x 1/ 1 1/ x 1/

12 x Closet (plastic nut) BRONZE PEX PRESS CLOSET ADAPTERS Connect ViegaPEX or FostaPEX tubing to water closets with these adapters. model /8 1 1/ OX BOX FRAME Replacement frame for single or double OX Box. model V OX BOX ACCESSORIES Use the Clip for mounting one or two OX Boxes to a stud. Use the 18" support bar for mounting outlet boxes between studs. OUTLET BOX CLIP model V OUTLET BOX 18" SUPPORT BAR model V PEX PRESS STOP VALVES - 1/4 TURN These valves allow fixture shut-off at the press connection between ViegaPEX or FostaPEX tubing and standard fixture risers. x CTS (OD) STRAIGHT STOP VALVE - 1/4 TURN model 84.3US /8 x 1/4 (3/8) 10 1/ x 1/4 (3/8) ANGLE STOP VALVE - 1/4 TURN /8 x 1/4 (3/8) 10 1/ x 1/4 (3/8) model 84.4US X PEX PRESS BALL VALVES Standard bore in-line ball valves for use with the Viega fitting system. Brass finish. model 84US /8 x 3/8 10 1/ x 1/ 10 3/4 x 3/

13 P x - # of Outlets BRONZE PEX PRESS PROPRESS COPPER MANIFOLDS Modular ProPress manifolds are available with 3/4" or 1" ProPress inlets for connection to copper tubing or copper fitting adapters and 1/" or 3/4" outlets. Connect manifolds directly together when more outlets are needed or use a ProPress end cap to close the maniflold. Press tool is required for the copper connection. ProPress is compatible with type K, L and M copper tubing only. model /4 x 1/ /4 x 1/ /4 x 3/ x 1/ x 1/ x 3/ PROPRESS COPPER MANIFOLD VALVE This valve fits the outlets for ProPress manifolds to create a valved manifold with 1/" outlets (1/" ProPress tool required). model 84.1US Copper x / x 1/ Inlet x - # of Outlets PEX PRESS BRAZED COPPER MANIFOLDS-MALE Commonly used to serve multiple fixtures from a single run. Made of Type L copper, the ports are spaced on " centers. 1" copper manifolds are available in various 1/" Bronze PEX outlet configurations. 1" male inlet for connection to ProPress adapters or copper tubing adapters. model 833US x 1/ x 1/ x 1/ x 1/ x 1/ x 1/ x 1/ PEX PRESS BRAZED COPPER MANIFOLDS-FEMALE Commonly used to serve multiple fixtures from a single run. Made of Type L copper, the ports are spaced on " centers. 1" copper manifolds are available in various 1/" Bronze outlet configurations. 1" female inlet for solder connection to copper tubing or copper fitting adapters. model 83US Inlet x - # of Outlets 1 x 1/ x 1/ x 1/ x 1/ x 1/ x 1/ x 1/

14 Header x - # of Outlets PEX PRESS BRAZED COPPER MANIFOLDS-HEADERS 1-1/4" and 1-1/" copper manifold stock available in 4 outlet lenghts for large header applications. Made of Type L copper. Outlets are 3" on center which allows manifolds to be easily cut to size. model 83US /4 x 1/ /4 x 3/ / x 3/

15 NOTES 175