Cloth trimming assistance to heavy material. self-installation : YES applicable model : 747K-514M7, 747Qe-514M7

Size: px

Start display at page:

Download "Cloth trimming assistance to heavy material. self-installation : YES applicable model : 747K-514M7, 747Qe-514M7"

Loren Booth
5 years ago
Views:

DEICE AN Cloth trimming assistance to heavy material.

over the thread and then insert into overlock seaming at the beginning of sewing.

747Qe-514M5, 747Qe-514M7 BKS 700Qe s computerized system precisely controls the

1 DEICE AN Cloth trimming assistance to heavy material. applicable model : 747K-514M7, 747Qe-514M7 BK BK-1 To prevent seam looseness, turn over the thread and then insert into overlock seaming at the beginning of sewing.. KD207 hand wheel: standard equipment of 700K/BK machine, optional for BK device.. Including BK232 sewing bed. BK BK-1 applicable model : 737K-504M5, 747K-514M5, 747K-514M7 737Qe-504M5, 747Qe-514M5, 747Qe-514M7 BKS 700Qe s computerized system precisely controls the movements of presser foot, thread releasing, and needle plate tongue. It makes the tight starting and achieves the requirement of sewing high quality. applicable model : 747Qe-514M5, 747Qe-514M7 CSA 53

1. Two-way suction (rear and front suction). 1/4 HP more than normal standard. (Rear suction is for thread trimmer, front suction is for fabric waste). 2. Quiet. 5dB lower than normal standard. 3.

Easy to clean, easy to assemble/disassemble, completed dust collection. 7. Air pressure can be adjusted as required. applicable model : MODEL w/ct, MODEL w/dt, MODEL w/t CSB 1.

25% space saved than normal standard. 5. Easy assembly. 25% time saved for assembly. 6. Easy to clean, easy to assemble/disassemble, completed dust collection. 7.

2 1. Two-way suction (rear and front suction). 1/4 HP more than normal standard. (Rear suction is for thread trimmer, front suction is for fabric waste). 2. Quiet. 5dB lower than normal standard. 3. Low temperature. 18% celsius lower than normal standard. 4. Space efficiency. 10% space saved than normal standard. 5. Easy assembly. 50% time saved for assembly. 6. Easy to clean, easy to assemble/disassemble, completed dust collection. 7. Air pressure can be adjusted as required. applicable model : MODEL w/ct, MODEL w/dt, MODEL w/t CSB 1. One-way suction, 1/4 HP more than normal standard. (for rear suction thread trimmer) 2. Quiet, 5dB lower than normal standard. 3. Low temperature. 10% lower than normal standard. 4. Space efficiency. 25% space saved than normal standard. 5. Easy assembly. 25% time saved for assembly. 6. Easy to clean, easy to assemble/disassemble, completed dust collection. 7. Air pressure can be adjusted as required. applicable model : MODEL w/ct, MODEL w/dt, MODEL w/t CT Take thread into trimmer tube by suction motor or air compressor. (Applicable for 4~6 thread machine) applicable model : 747K, 757K, 767K, 747Qe, 757Qe, 767Qe CTE 700Q s computerized system drives sensor-controlled energy saving device. Electric eye (sensor) checks the fabric edge. Turn the button of control box to set the time of air suction of chain-cutter. It saves the energy consuming of air compressor system and also saves thread consuming. self-installation : NO applicable model : 747QD, 757QD, 767QD 54

DT Take thread into trimmer tube by suction motor or air compressor.

Cuts tape/ elastic by pressing the button. 1.

Hand-control button : standard Knee-control paddle (FEC34-A) : Optional applicable

ECA ECB Advanced sensor inspects the completion of sewing work and initiates cutting

ECA is pneumatic type, and ECB is electric type, compatible with air suction slot,

ECA ECA ECB ECE Dual Sensor Cutter Pneumatic Electric Electric Foot Lifter Pneumatic

3 DT Take thread into trimmer tube by suction motor or air compressor. (Applicable for top feed RT/FT) applicable model : 747DFT, 747DRT, 757DFT, 757DRT EC Cuts tape/ elastic by pressing the button. 1. EC-K: Standard knife (16 mm'') EC-K-A: Long knife (22 mm") 2. Hand-control button : standard Knee-control paddle (FEC34-A) : Optional applicable model :MODEL w/ga/p, MODEL w/lfc-3, MDDEL w/ps, MODEL w/ta, MODEL w/tg, MODEL w/tr ECA ECB Advanced sensor inspects the completion of sewing work and initiates cutting without time lag. ECA is pneumatic type, and ECB is electric type, compatible with air suction slot, which makes the operation more smoothly. ECA ECA ECB ECE Dual Sensor Cutter Pneumatic Electric Electric Foot Lifter Pneumatic Set Suction Set Suction Channel X Remark Full Function Full Function Economic ECB ECE Applicable for: Garment factory without air compressor, or Continually short sewing operation without presser foot lifting. self-installation : NO applicable model : 737QD, 747QD, 757QD, 767QD 55

FG For tape feeding, on the right side of the table. applicable model : MODEL w/ga/p, MDDEL w/ps, MODEL w/ta GA Continuous or intermittent random gathering on lower ply.

applicable model : 747K-514H4, 747Qe-514H4, 757K-516H4, 757Qe-516H4 GAL Continuous or intermittent random gathering on lower ply. P: Piping folder K57 (tape width 25mm / finish width 6mm) is optional.

4 FG For tape feeding, on the right side of the table. applicable model : MODEL w/ga/p, MDDEL w/ps, MODEL w/ta GA Continuous or intermittent random gathering on lower ply. P: Piping folder K57 (tape width 25mm / finish width 6mm) is optional. For piping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. eg P204P. applicable model : 747K-514H4, 747Qe-514H4, 757K-516H4, 757Qe-516H4 GAL Continuous or intermittent random gathering on lower ply. P: Piping folder K57 (tape width 25mm / finish width 6mm) is optional. For piping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. eg P214P-2A. P.S. GAL-K ( for 737K-504F2 ), GAL-Q ( for 737QD-504F2 ) applicable model : 737K-504F2, 737Qe-504F2 GB Continuous or intermittent random gathering on lower ply, for top feed model. P: Piping folder K57 (tape width 25mm / finish width 6mm) is optional. For piping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. e.g. P463P. applicable model : 747DFT-514H4, 757DFT-516H4 56

GL Working glove opening serging with rubber band attachment.

machine. For normal overlock sewing operation.

Elastic tape is fed by motor for zero tension and required length.

tension by adjusting the gear. Presser foot: P101-3 for 3 thread P101-4 for 4 thread Standard is P101.

5 GL Working glove opening serging with rubber band attachment. self-installation : NO applicable model : 737FS-504M2 KB61-A To convert cylinder bed machine into flat bed machine. For normal overlock sewing operation. applicable model : 737FS, 747FS LFA-A 1: 110, 2: 220 To keep constant tension for sewing. Elastic tape is fed by motor for zero tension and required length. =voltage, 1: 110, 2: 220 applicable model : MODEL w/lfc-3, MODEL w/tg, MODEL w/tr LFC-2S To Control elastic tape tension by adjusting the gear. Presser foot: P101-3 for 3 thread P101-4 for 4 thread Standard is P101. Special demand by request. Presser Foot P101 P102 P103 WP103 Elastic Size 2-13mm 2-20mm 2-30mm 2-35mm applicable model : 737FS-504M2, 747FS-514M2 LFC-3 To Control elastic tape tension by adjusting the gear. Presser foot: P216-3 for 3 thread P216-4 for 4 thread Standard is P216. Special demand by request. 57

Presser Foot P216 P217 P218 WP219 Elastic Size 2-13mm 2-20mm 2-30mm 2-35mm

equipped with LFA (tape feeding device).

25 mm / Finish width 6 mm applicable model : MODLE w/ga PS Overlock sewing

6 Presser Foot P216 P217 P218 WP219 Elastic Size 2-13mm 2-20mm 2-30mm 2-35mm applicable model : 737K-504M2, 747K-514M2 LF290 -A An optional device to be equipped with LFA (tape feeding device). Untangling the elastic tape by reverse rotation wheel is a pre-feeding process. =voltage, 1: 110, 2: 220 applicable model : MODEL w/lfa LS For top feeding tape or elastic. applicable model : MODEL w/lfc-3, MODEL w/tg, MODEL w/tr P(K57) Tape width 25 mm / Finish width 6 mm applicable model : MODLE w/ga PS Overlock sewing with tape binding for strengthening the pocket edge. PS201: Folder, for tape width 3/8" (9.5mm) applicable model : 757K-516M2, 757Qe-516M2 PZ Overlock sewing for joint between zipper and cloth. applicable model : 737K-504M3, 737Qe-504M3 58

RLS Especially used to assist with tubular cloth sewing.

strengthening the pocket edge. Standard folder(tape width 25.4mm/ finish width 6.

stretching, insert woven tape for strengthening.

applicable model : 747K-514M2, 747Qe-514M2, 747K-514M7, 747Qe-514M7 TR Applicable

Control the tension of elastic by the spring.

7 RLS Especially used to assist with tubular cloth sewing. applicable model : 700FS TA Tape binding by two chainstitch sewing for strengthening the pocket edge. Standard folder(tape width 25.4mm/ finish width 6.4mm) applicable model : 757K-401M2-50, 757Qe-401M2-50 TBK TB-Q1 700K series machine base for full submerged table. applicable model : Table 700K-T1, Table 700Q-T1 TG To prevent knit wear shoulder stretching, insert woven tape for strengthening. P254J-4A: Presser foot for maximum tape width is 13 mm. applicable model : 747K-514M2, 747Qe-514M2, 747K-514M7, 747Qe-514M7 TR Applicable for non-woven/ plastic shower cap sewing. Control the tension of elastic by the spring. applicable model : 737K-504M2, 737Qe-504M2 TU When stepped on the pedal for sewing, air from compressor vacuums the thread into the trimmer tube, and then the trimmer cuts the thread. Thread waste is collected by the tube. applicable model : MODEL w/ct, MODEL w/dt, MODEL w/t, Please Refer Motor Page 59

700Q/700QD s computerized system drives sensor-controlled energy saving device.

Turn the button of control box to set the time of air suction of chain-cutter.

8 TW Applicable for towel edge sewing. applicable model : 757K-401, 757Qe-401 T Take thread into trimmer tube by suction motor or air compressor. (Applicable for 3~4 thread machine) applicable model : 737K, 747K, 737Qe, 747Qe, 737FS, 747FS TE 700Q/700QD s computerized system drives sensor-controlled energy saving device. Electric eye (sensor) checks the fabric edge. Turn the button of control box to set the time of air suction of chain-cutter. It saves the energy consuming of air compressor system and also saves thread consuming. self-installation : NO applicable model : 737QD, 747QD WR/ LFC-3 Overlock sewing at knit tape edge and then turn it into tube. For swimwears, night gowns etc. Folder size: tape width is 22.2mm, finished tube size is 5mm in diameter. applicable model : 737K 60

TUA-3X 700QD(ECA, ECB, CTE, TE)700K, 700KT, 700Qe 700QD clusive suction set is the standard device of

suction) and lint (inner suction). Also, TUA-3X is compatible to 700K, 700KT, 700Qe series.

Lifter (Air cylinder+ bracket) K K type bracket Q Q type bracket K K type bracket Q Q type bracket Air Switch

CT Applicable Series 700K, 700KT, 700Qe 700K, 700KT 700Q, 700Qe 700K, 700KT with servo motor 700Q 700K, 700KT

are 8-Pin (Hohsing MJ series) and 15-Pin (Hohsing i series). TSA Series is not applicable.

9 TUA-3X 700QD(ECA, ECB, CTE, TE)700K, 700KT, 700Qe 700QD clusive suction set is the standard device of sensor-controlled machine (ECA, ECB, CTE, TE), which cleans away thread ends (rear suction),cloth waste (front suction) and lint (inner suction). Also, TUA-3X is compatible to 700K, 700KT, 700Qe series. Code TUA-31 TUA-31-A TUA-32K TUA-32Q TUA-33K TUA-33Q TUA-34K TUA-34Q 3-in-1 set Functional Section Presser Foot Lifter (Air cylinder+ bracket) K K type bracket Q Q type bracket K K type bracket Q Q type bracket Air Switch Mechanical Type Single way Double ways Double ways Solenoid Type Single way Double ways Filter Optional Device T CT Applicable Series 700K, 700KT, 700Qe 700K, 700KT 700Q, 700Qe 700K, 700KT with servo motor 700Q 700K, 700KT with servo motor Remark: The solenoid must be driven by servo motor control box. The adapter spec. are 8-Pin (Hohsing MJ series) and 15-Pin (Hohsing i series). TSA Series is not applicable. 700Q The above example is for the purpose of position explaining between machine, air switch, air hose, and dust bag. Practically the mechanical type air switch is mainly suitable for clutch motor. 61

10 TUB NO 1 Applicable Type Part acuuming Way Front Back Inner Presser Foot Lifter Functional Components Mechanical alve Solenoid Adjusting Filter Muffler Servo Motor TUB-1 2 TUB-3 3 Overlock TUB-3N 4 TUB-13 5 TUB-14 6 TUB-2F 7 TUB-4F 8 700F TUB-4FN 9 700FS TUB-8F 10 TUB-10F 11 TUB-10FN 12 TUB-2K 13 TUB-4K K TUB-4KN 700KT KST TUB-8K 16 TUB-10K 17 TUB-10KN 18 TUB-5DS FLP-1A Additional Order FLP-1A 19 TUB-5DS1 FLP-1A Including the Included FLP-1A presser foot lifter KD TUB-6DS FLP-1A Additional Order 21 TUB-6DSN FLP-1A 22 TUB-7 23 TUB-9 24 TUB-9N 25 TUB-11Q FLQ-A Q TUB-12Q Additional Order 27 TUB-15Q FLQ-A Clutch 62

MOTOR Motor No. CLUTCH MOTOR SIMPLIFIED SERO MOTOR /Specification W Pole Phase HZ / R.P.M.

110 T3201xx 220 T3202xx 240 T3203xx 380 T3204xx 220 400W TSA-400 200-240 4 1 2 1 3 1 3

Applicable Model 700K 757UX 700FS 700DFT 700FS 700FS/LF-D6 700K 700KS 700KT 700KST 700UX

11 MOTOR Motor No. CLUTCH MOTOR SIMPLIFIED SERO MOTOR /Specification W Pole Phase HZ / R.P.M. T3221xx 220 T3222xx 240 T3233xx W T3239xx T3223xx 380 T3224xx 220 T3230xx 110 T3201xx 220 T3202xx 240 T3203xx 380 T3204xx W TSA HZ/2850R.P.M. 60HZ/3450R.P.M. 50HZ/60HZ 5000R.P.M. Applicable Model 700K 757UX 700FS 700DFT 700FS 700FS/LF-D6 700K 700KS 700KT 700KST 700UX Remark TSA21-A1 TSA21-A1 (for Built-in Type) - 2-in-1 dual motor integrates functions of both clutch motor and suction motor. Precise design ensures good quality and low failure rate. - Energy saving. Independent air compressor system. - Cost saving, 2-in-1 dual motor saves the cost of suction motor or compressor. - Low noise sound level. Motor No. CLUTCH MOTOR W/FABRIC & THREAD WASTE ACUUMING DEICE CLUTCH MOTOR W/THREAD WASTE ACUUMING DEICE CSC-T3601U CSC-T3602U 110 CSC-T3603U CSC-T3604U 220 CSC-T3605U CSC-T3606U CSC-T3607U CSC-T3608U W CSC-T3621U CSC-T3622U 110 CSC-T3623U CSC-T3624U 220 CSC-T3625U CSC-T3626U CSC-T3627U CSC-T3628U /Specification W Pole Phase HZ R.P.M Applicable Model MODEL w/ct MODEL w/dt MODEL w/t 63

12 Fully-submerged Non-submerged TABLE Item No. Length / Size (mm) Width Thickness Description Applicable Model Remark 700K-T K, 700KT 700K-T Fully-submerged 700K, 700KT TBK-1 TBK-1 set required 700K-T Fully-submerged 700K/EC,CT,T TBK-1 TBK-1 set required 700K-T K/BKF 747-T DFT/DRT 757UX 700Q-T QD, 700Qe 700Q-T Fully-submerged 700QD,700Qe TB-Q1 TB-Q1 set required 700KS-T KS/KST 700KS-T KS/KST 64

700K SERIES FEATURES. New fabric trimmer mechanism Low axis knife holder prevents cloth rolls up after trimming.

700K SERIES FEATURES. New fabric trimmer mechanism Low axis knife holder prevents cloth rolls up after trimming. 700K SERIES FEATURES Sealed type direct drive needle bar mechanism - Dust free and oil-leakage-free are due to entirely sealed needle bar section design. - Direct drive needle bar system leads to high