Cr.22 WIRE PROCESSING MACHINE FEATURES. Convenient Tool Cart Solution reduces set-up time and improves throughput
|
|
- Austen Skinner
- 5 years ago
- Views:
Transcription
1 The first name in wire processing Cr.22 WIRE PROCESSING MACHINE FEATURES Convenient Tool Cart Solution reduces set-up time and improves throughput Up to four processing stations for a wide range of applications A second control station at the wire in-feed allows access to PC program, reducing operator movements during set-up
2 Cr.22 WIRE PROCESSING MACHINE WE PROCESS THE WIDEST RANGE OF WIRE BAR NONE Built on the same platform as our popular Cr.11, the Cr.22 offers up to four processing stations for a wider range of end of wire applications including crimping, weather seal application, wire end twisting and wire tinning. Like the Cr.11, the digital servo driven Cr.22 offers unique set-up features designed to shorten the machine set-up time, allowing for processing in both large batch, and high mix/low lot size environments. LOOK AT ALL THE Cr.22 HAS TO OFFER Standard Servo Driven Terminating Units Our TU-12 Terminating Unit features programmable stroke and split cycle operation for the broadest application range Intelligent software optimizes speed by automatically coordinating the crimping cycle with wire placement Optional TU-12 HD version available for the most demanding crimping needs Optional Loose Weather Seal Station Provides application of loose weather seals on the wire end prior to crimping Quick change kits available to run different size seals MACHINE DIMENSION Length with Straightener 125 in 3175 mm Width with Carts 53 in 1346 mm Height (Guard down) 65.5 in 1664 mm Height (Guard open) 101 in 2557 mm Machine Weight 1900 lbs 864 Kg Cart Weight 70 lbs 32 Kg Max. Reel Width 8.5 in 216 mm POWER SUPPLY Standard VAC +/-10%, 1 Ph, 50/60 Hz. 20 Amp circuit Optional 208 VAC +/- 10%, 1 Ph., 50/60 Hz. 20 Amp circuit PNEUMATIC SUPPLY 80 PSI (6 Bar) 1.5 CFM continuous, 6.5 CFM peak (at master start only) WIRE RANGE Min. 30 AWG 0.05 mm 2 Max. (Standard) 12 AWG 4 mm 2 Max. (With Options) 10 AWG 6 mm 2 Max. OD in 5 mm Note: Largest and smallest wire gages must be verified by Artos to assure processing capabilities. Optional Wire End Twisting and Tinning Twisting unit mounts into the standard TU-12 crimping unit and is easily removed to allow for crimping applications Flux and Tinning unit allow for lead free tinning of wire ends Easy to Use PC Interface Simple, yet powerful, software allows for complete machine programming Networkable system allows for data sharing via.xml or.csv file format Built in quality controls for both set-up verification and process inspection WIRE LENGTH Min in 21 mm (plus lead and tail strip lengths. Min. wire length may also be limited by crimping tooling design). Max in 100 M STRIPPING LENGTHS Min in 0.1 mm Max in 32 mm Innovative Options to Shorten Machine Set-up Time Patent-Pending Sencor automatically sets stripping blade depths Motorized programmable bases automatically adjust tooling height when changing from open to closed barrel crimping Self threading wire loading and tool-less guide changes shorten wire set-up time The first name in wire processing Artos Engineering Company Gateway Ct. Brookfield, WI USA Phone sales@artosnet.com Bulletin No. Cr
3 CR.22d Option Description and Price List Item: Description Photo CR.22d Base Machine Base Machine with 230 Volt, 1-Phase, 50/60 Hz Closed Loop 8M/sec Brushless Servo Roller Feed System Wire measuring encoder with length calibration and wire slip detection Servo Driven Swing Arms Featuring Programmable Wire-Terminal Set-up Servo Driven Cutterhead Featuring Programmable Wire Diameter and Stripping Set-Up Motorized 2 meter collector with batching tray P.C. Operator Interface Featuring Windows and Artos Unity Software Complete wire guide kits for up to 5.5 mm (0.218 ) wire diameter Wire Straightener (Vertical and Horizontal) Complete Upward Lifting Safety Shield One Owners Manual Paper Take-up Motorized collection of terminal reel paper. This feature allows for the coiling of the paper which separates side feed terminals for better housekeeping. Sencor Patent pending system for automatic setting of stripping blades. Technology senses the conductor within the wire and automatically set the value of the stripping diameter. Reduces wire waste and shortens set-up time. Can also be used to monitor blade wear. Active Wire Collection "Pick n Place" unit Pneumatic gripper to assist in wire collection. Completed wires are handed to the pick n place unit which lowers the finished wire into the collection tray. Domestic / Air Box Ocean / Export Box Crate for shipment within USA or Air shipment Crate for ocean shipment. 208 Volt, Single Phase Special 208, 1phase, 50/60 Hz. Voltage (requires custom transformer). For use where standard 230 Volt 1 Phase power is not available. Installation / Training Installation and training by Artos direct technicians. Recommend two days minimum. Price is per day. Travel expenses are not included and billed separately.
4 Dual Feed Wire Straightener Upgraded wire straightener which allows for the pre-loading of a second wire while the machine is in cycle mode. Wire Splice Detector Option for detecting splices of wire from wire barrels or spools. Available for single or dual wire straighteners. Price is for single wire straightener. Articulating Wire Infeed Roller Two plane articulating wire infeed roller alows for smooth wire feeding from multiple directions. Standard TU-15 Servo Crimping Module TU-15 terminal crimping station for standard "mini" style applicators. Unit is servo controlled wtih programmable stroke and split cycle operation. Includes Standard TU- 15 equipped with AMP style die interface kit, terminal carrier strip chop-off, manual Z- Axis height adjustment, and one terminal reel cart. Price is for one unit. TU-15 (HD) Servo Crimping Module Upgraded TU-15 Heavy duty terminal crimping station for standard "mini" style applicators. Unit is servo controled wtih programmable stroke and split cycle operation. Includes TU-15 HD equipped with AMP style die interface kit, terminal carrier strip chop-off, manual Z-Axis height adjustment, and one terminal reel cart. TU- 15 HD is recommended for 6mm 2 (10 AWG) wire sized. Price is for one unit. Heavy Duty Gripper Option Upgrade to HD Gripper for processing large 10 AWG (6mm 2 ) and difficult to strip wires. TU-15 Manual Crimp Height Adjustment Upgrade to TU-15 crimping unit with manual (dial) adjustment of the crimping height. Crimping unit may be standard or HD version. Price is per unit. TU-15 Programmable Crimp Height Adjustment Upgrade to TU-15 crimping unit with programmable (servo controlled) adjustment of the crimping height. Crimping unit may be standard or HD version. Price is per unit.
5 "JAM" Style Die Mounting Kit Replaces standard "AMP Mini" style interface kit. Utilizes 30mm press stroke. Price is per press, and two will be required for two presses. "AMP Mini" Style Screw Down Die Mounting Kit Replaces standard quick release "AMP Mini" style interface kit. Used for applicators which need high force to open. Price is per press, and two will be required for two presses. CFM-2100 Crimp Force Monitor for crimping inspection. System learns "good" crimps and compares all crimps to learned good crimps. If crimp is out of tolerance, the CR.22 will cut the crimp off and remake new wire. Wires with "bad" crimps are separated from good wires. Price is for two presses. Bad Wire Chopoff Diverter Guide to sort and collect failed crimps from the trailing wire end. ASM-400 Seal applicator Station for loading loose rubber weather seals onto wire end. Common and interchangeable seal kits with Pawo and Schafer. Price includes mounting kit, but excludes tooling kit. Large Seal Tooling Kit Tooling kit for SLU module includes feeding track, funnel, and guide pins. Tooling kit is uniquely designed for each individual seal. LPA-56 Seal position sensor model LPA-56 which checks the position and orientation of the seal placed on each wire to assure quality. Price is for one station. Flux / Tin Module Station for Fluxing and Tinning wire ends. Standard design is for lead free solder.
6 TW-3 In Press Twisting Module Station for twisting wire ends. Can be used with the Flux/Tin Module to provide twist, flux and tin. Pricing includes TW-3 unit, contral module, and cable Same Wire Doubling Module Station for placing two separate wires into a common terminal. Cart Assembly Additional cart assembly for pre-loading terminals and die onto a cart off line of the machine, reducing machine down-time for set-up. Price includes paper winder Dual-Cart Asembly Substitute Standard Cart assembly for Dual-Cart design. This option allows of two terminal applications to be loaded on one cart. This benefit allows for the set-up of the next terminal while the current application is being processed, reducing machine down time for set-up and eliminating the need for extra carts. Cost is to substitute one cart and includes Paper-Take up Winders. Motorized adjustment of the Z-Axis (up / down) for wire placement into the terminal. Programmable Z-This option allows for fully programmable adjustment for open to closed barrel Axis terminals, with no manual adjustments. Price is for each press (two are needed for CR.22). Crimp Height Measurement Integrated crimp height micrometer. Allows the CR.22 to retain specified crimp height and tolerance for each terminal / wire combination. As part of the machine set-up, crimps must be measured and within tolerance before production begins. Pull Test Verification - Manual Tester (May be on Back Order) Integrated terminal pull testing station. Allows the CR to retain specific pull test values for each terminal / wire combination. As part of the machine set-up, crimps must be tested and greater than pull test minimum requirement before production begins. Manual tester requires operator to manually operate the pull testing station. Pull Test Verification - Automatic Tester Integrated terminal pull testing station. Allows the CR to retain specific pull test values for each terminal / wire combination. As part of the machine set-up, crimps must be tested and greater than pull test minimum requirement before production begins. Automatic tester utilizes a motor during pull testing.
7 Ink-Jet Interface Interface for Imaje 9040 ink jet marking system. Fully integrated with programmable and recallable marking of wire. Available with either bar mounting or cutterhead mounting. Marking system is sold separately. A/B Switch Special A/B switch allowing quick change between two ink-jet marking systems with different color inks Hot Stamp Interface Interface for KIP-20 Hot Stamp marking unit. Inlcudes electrical ( ) and mechanical mounting interface ( ). Kip-20 Marker sold seperately. 4-Meter Collector W/ Acitve Pick n Place Upgrade to 4 meter motorized collector with batch sorter for long wire collection. Includes active wire collection "Pick n Place" unit. CD-21 Modular Dual Bowl Coiling Uprade to coiling option for long wires. Suitable for wire lenths over 12 feet (3.5 meters). Coiling unit is on casters, and rolls in and out as needed. CD-22 2 meter collector is also provide on casters, for quick change between stadard collection and coiling option. Price is for both coiling option and standard linear collector. Bar Code Scanning Integration of a bar code scanning system for data entry. Used for input of production data. Also used to verify materials supplied to the machine. Post Process Printer Integrated label printer allowing the printing of customer defined information upon the completion of a wire batch. Used for routing of material and traceability. Urethane Belted Feed Wheels Substitute standard knurreled feed wheels with Urethane Belted Feed Wheels for processing small and softer wire insulations. Replacement belts are available. Spare Parts Kit Common replacement parts for CR.22 (kit # )
8
Cr.22 WIRE PROCESSING MACHINE FEATURES. Convenient Tool Cart Solution reduces set-up time and improves throughput
The first name in wire processing Cr.22 WIRE PROCESSING MACHINE FEATURES Convenient Tool Cart Solution reduces set-up time and improves throughput Up to four processing stations for a wide range of applications
More informationUNIQA-PRO SINGLE CRIMP WIRE PROCESSOR
UNIQA-PRO SINGLE CRIMP WIRE PROCESSOR A UNIQUE APPROACH TO SIMPLIFYING YOUR BOTTOM LINE A UNIQUE WAY TO SIMPLIFY YOUR BOTTOM LINE The UNIQA-PRO single crimp wire processor is a cost-effective solution
More informationGamma 255. The fully automatic wire processing machine for wires with small cross sections
Gamma 255 The fully automatic wire processing machine for wires with small cross sections Top quality processing over a uniquely broad range of cross sections. This fully automatic wire processing machine
More informationGamma 263. Functionality and economy ideally combined
Gamma 263 Functionality and economy ideally combined THE WAY TO MAKE IT AFFORDABLE Although compact in size, this fully automatic crimping machine combines simplicity and functionality with economy and
More informationAlpha 355S / Alpha 356. Multifunctional automatic crimping machines
Alpha 355S / Multifunctional automatic crimping machines THE WAY TO MAKE IT FLEXIBLE With their open architecture, the Alpha 355S and have a wide variety of applications. Besides Komax standard processing
More informationCoe Press Equipment Corporation. Power Straighteners. Coe Press Equipment Corporation. The Company That Feeds an Industry
Coe Press Equipment Corporation Power Straighteners Coe Press Equipment Corporation The Company That Feeds an Industry POWER STRAIGHTENERS 175 Series Straighteners The 175 Series of power straighteners
More informationLead Makers and Harness Makers
and Harness Makers and Harness Makers Application Tooling and Equipment Portfolio Applicators Crimp Machines and Equipment Electrical Test Equipment FFC-FPC Equipment Hand Tools IDC Machines Lead Makers
More informationOptimise wire processing A comprehensive range of products for the workshop
Optimise wire processing A comprehensive range of products for the workshop Forward-looking process optimisation Cutting to length, stripping and crimping the faster and more accurately these routine tasks
More informationNu/Clean AquaBatch XL The Batch Cleaner with the HIGHEST TEMPERATURE PROCESS & the added cleaning power of STEAM!
Nu/Clean AquaBatch XL The Batch Cleaner with the HIGHEST TEMPERATURE PROCESS & the added cleaning power of STEAM! The AquaBatch XL is a quiet, efficient batch cleaning system designed to remove all types
More informationE Labelers Wraparound Labeling for Cylindrical Containers
NI I EW WAY BULLETIN El E Labelers Wraparound Labeling for Cylindrical Containers Model E5 Labeler shown with STD casters, deep label bed and guard package. Fig. 1622. "A step ahead in packaging" Featurr
More informationPROFIT STARTS WITH CARE
Farmpackers DIAMOND 70 FP DIAMOND 100 FPX DIAMOND 200 FPX part of the moba group PROFIT STARTS WITH CARE Right hand Diamond 200 FPX. Right hand Diamond 100 FPX shown with 90 degree takeaway conveyor and
More informationCrimping Tool & Machine
Crimping Tool & Machine Product reliability depends on three things: design, manufacturing and processing. To ensure the highest level of reliability, our Nittan Techno subsidiary designs, makes and sells
More informationVersion 7 1/ LXP
SECTION 11600 LABORATORY GLASSWARE WASHER Model 1600 LXP PART 1 GENERAL 1.01 SYSTEM DESCRIPTION A. Laboratory Glassware Washer/Dryer 1.02 SUBMITTALS A. Bill of Materials B. Product Literature C. Installation
More informationVersion 7 1/ LX
SECTION 11600 LABORATORY GLASSWARE WASHER Model 1300 LX PART 1 GENERAL 1.01 SYSTEM DESCRIPTION A. Laboratory Glassware Washer/Dryer 1.02 SUBMITTALS A. Bill of Materials B. Product Literature C. Installation
More informationSEWING AUTOMATION. Model 1335SA. Innovative Technology for the Sewn Products Industry Worldwide
SEWING AUTOMATION Innovative Technology for the Sewn Products Industry Worldwide New Style Ruffled Pillow-Top Plain, Fused, Vertical Stitch and Quilted Gusset 300% productivity improvement over manual
More informationLOKPRINT. Industrial Apparel Label Station. Operation / Maintenance And Parts List. Users Manual AVERY DENNISON. Manual Edition 5.0.
Users Manual LOKPRINT Industrial Apparel Label Station Operation / Maintenance And Parts List AVERY DENNISON Manual Edition 5.0 09 June 2010 Manual Part Number 221398 This page intentionally left blank
More informationPATM-RK / PATM-TT. Best Practices for Successfully Integrating PAT1M or PAT1.5M Systems With a Robot
Panduit Corp. 2012 PATM-RK / PATM-TT PA26234A01 Rev. 04 9-2012 Best Practices for Successfully Integrating PAT1M or PAT1.5M Systems With a Robot Panduit recommends using the PAT/Robotic Kit (PATM-RK) when
More informationTC-720 RECYCLING BALER
OPERATING AND MAINTENANCE INSTRUCTIONS TC-720 RECYCLING BALER READ INSTRUCTIONS THOROUGHLY BEFORE OPERATING Sept. 06, 2013 3451 S. 40th Street Phoenix, AZ 85040 602.437.5020 800.223.4540 www.tsissg.com
More informationTwo Great Signs of Progress Come Together to Bring You More...
Want More? More at the Corr Two Great Signs of Progress Come Together to Bring You More... More leading edge direct printing on corrugated technology. More dedication to the advancement of direct print
More informationTOOL STORAGE. Tool Storage. XL Series Ball Bearing Series Tool Storage Accessories
Tool XL Series Ball Bearing Series Tool Accessories GEARWRENCH XL SERIES GearWrench now offers the industrial strength XL Tool series. Professionals have come to expect innovation and increased productivity
More informationASTRO ENVELOPE FEEDER AMC FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS
ASTRO ENVELOPE FEEDER AMC-2000-17 FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable, and
More informationCAUTION. Machine: SHRINK LABEL AUTOMATIC APLICATOR. Model: SLEEVEPRO 450AB. Input Voltage: 400 VAC, 3PH, 50Hz. Contact:
CAUTION Read carefully all the instructions of this manual before start any operation on this machine. Do not put your hands close to any moving part of the machine. Do not make any adjustment when the
More informationApplication Specification MAG-MATE* Poke-In Tab Terminals
Application Specification MAG-MATE* 114-2050 Poke-In Tab Terminals 30 MAR 07 Rev G1 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationG. MONDINI DOSATRICI-CONFEZIONATRICI AUTOMATICHE. Tray Sealer Trave-340
Technical Documentation G.Mondini S.p.A. G. MONDINI Tray Sealer TRAVE-340 SpA DOSATRICI-CONFEZIONATRICI AUTOMATICHE Tray Sealer Trave-340 Tool sizes are 300mm in width and 400 in length, number of trays
More informationUNiVERSAl SERiES SHREDDER-FEEDER-EXTRUDER COmBiNATiON A:GRAN.
UNiVERSAl SERiES SHREDDER-FEEDER-EXTRUDER COmBiNATiON A:GRAN > ONE-STEP technology > Process bulky plastic scrap > One-button automatic On/Off control > DUmP and RUN operation www.ngr.at TECHNOlOGY THE
More informationM O D E L G W T - 202P OPERATIONS MANUAL TABLE OF CONTENTS
M O D E L G W T - 202P OPERATIONS MANUAL TABLE OF CONTENTS INTRODUCTION... 1 SECTION 1 1.0 SAFETY... 1-1 1.1 EMERGENCY... 1-1 1.2 Know your machine... 1-1 1.3 Power Supply... 1-1 1.4 Keep guards in place....
More informationFA 35 / FA 43 / FOLDERS
FA 35 / FA 43 / FOLDERS Uniquely dedicated to precise, light-weight pharmaceutical leaflet folding FA35 / FA43 FOLDERS B EXCEPTIONAL MINIATURE FOLDING This is the only sheetfed folder specifically designed
More informationComplete Waste Tire Recycling Line
Complete Waste Tire Recycling Line Manufactured new in 2009 and started operation in 2010 and has less than three years in service. This line is designed to handle 1.5millon 2millon tires per year. This
More informationDesoldering DS017 DS017-P DS017LS AS196 US140 US140-P. LT-1 Lead free tip tinning compound (.5 oz. )
For over 40 years EDSYN has been manufacturing high quality precision soldering and desoldering tools and associated equipment. Don t compromise on quality and features, always specify EDSYN. Desoldering
More informationSmart Comfort Solutions HIGH VELOCITY DRUM FANS
Smart Comfort Solutions HIGH VELOCITY DRUM FANS Direct Drive Drum Fans Direct Drive drum fans are great for heavy duty air circulation in light duty commercial applications where an economical solution
More informationAEC Sales & Support Research Equipment Phone Fax East Main Street
Research Equipment Research Accessories and Equipment COB INCLINE CONVEYOR AND COB BIN - Incline belt conveyors are designed to transfer cobs into a cob bin for convenient disposal. Cob incline conveyor
More informationH&O DIE SUPPLY, INC SPR-2000-JR. Programmable Fluid Controller Interstate 20 Kennedale, TX 76060
9 SPR-2000-JR Programmable Fluid Controller www.unist.com 3 10 Metalforming Lubrication Systems this input is typically based on the stroke of the press and comes from a programmable limit switch (PLS)
More informationTechnical Documentation G.Mondini S.p.A. Tray Sealer TRAVE-384
Tool size: 330 mm wide x 840 mm long; the number of trays per tool is calculated using actual tray dimensions and tray orientation. Sealing tool driving system and sealing force generator consist in a
More informationM O D E L G W T OPERATIONS MANUAL TABLE OF CONTENTS
M O D E L G W T - 202 OPERATIONS MANUAL TABLE OF CONTENTS INTRODUCTION... 1 SECTION 1 1.0 SAFETY... 1-1 1.1 EMERGENCY... 1-1 1.2 Know your machine... 1-1 1.3 Power Supply... 1-1 1.4 Keep guards in place....
More informationTHE PROFESSIONAL S CHOICE SINCE 1953 INDUSTRIAL HEATING & COOLING CATALOG. masterindustrialproducts.com
INDUSTRIAL HEATING & COOLING CATALOG masterindustrialproducts.com KEROSENE/DIESEL FORCED AIR HEATERS KFA BUILT-IN CALIBRATED AIR PRESSURE GAUGE BUILT-IN THERMOSTAT* HEAVY-DUTY 10 IN PNEUMATIC WHEELS**
More informationGrafisk Maskinfabrik A/S Bregnerødvej 92, DK-3460 Birkerød, Denmark Phone: Internet: Fax:
Grafisk Maskinfabrik A/S Bregnerødvej 92, DK-3460 Birkerød, Denmark Phone: +45 45 81 23 00 Internet: www.gm.dk e-mail: gm@gm.dk Fax: +45 45 81 99 56 OPERATING INSTRUCTIONS FOR TF400 Folding Machine 2 Index
More informationLevel V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline
Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline Product Facts Termination of discrete wire sizes 26-22 AWG [0.12-0.3 mm 2 ] as well as jacketed cable and bonded ribbon cable (conductors separated)
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63827-5770 FEATURES Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-5700 A full cycle ratcheting hand tool ensures complete crimps Ergonomically
More informationVMC 208. Product Capacity: Width: 1-20 (Speeds +450 minute)
VMC 208 Product Capacity: Width: 1-20 (Speeds +450 minute) VMC 206 vacuum transport/finishing conveyors - Quality without compromise - from the innovative vacuum system to the anodized aluminum frames.
More informationFTNON Magnetic Onion peeler
Magnetic Onion peeler Yield - Hygiene - Convenience Yield Hygiene Convenience. These are the key features of the new onion peeling machine developed by in collaboration with Gills Onions and the American
More informationFashion Decoration Home Textiles Technical Textiles Flags & Banners
Colaris Infiniti SK Fashion Decoration Home Textiles Technical Textiles Flags & Banners www.zimmer-austria.com 24 February 2016 page 1 ZIMMER AUSTRIA 140 years of revolutionary innovation and developments
More informationWIDE AREA VACUUM MODEL PF2030 WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
OPERATOR S MANUAL & PARTS LIST WIDE AREA VACUUM MODEL PF2030 WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. Tacony, Inc., All rights reserved Save These
More informationRevisions to this application specification include: Updated document to corporate requirements Changed product types in table in Figure 6
This specification covers the requirements for application of PLASTI GRIP Terminals and Splices for commercial applications. The terminals and splices consist of precision formed metal wire barrel insulated
More informationFort Rouge Leisure Centre Section HVAC Upgrades Phase 2 Page 1 of 5 Bid Opportunity No March 2013 FIRE ALARM SYSTEMS
HVAC Upgrades Phase 2 Page 1 of 5 Part 1 General 1.1 SUMMARY.1 Section Includes:.1 Materials and installation for fire alarm systems upgrades..2 Audible signal devices..3 End-of-line devices..4 Sustainable
More informationSECTION LABORATORY GLASSWARE WASHER Model 1800 LXA PART 1 GENERAL 1.01 SYSTEM DESCRIPTION 1.02 SUBMITTALS 1.03 QUALITY ASSURANCE 1.
SECTION 11600 - LABORATORY GLASSWARE WASHER Model 1800 LXA PART 1 GENERAL 1.01 SYSTEM DESCRIPTION A. Laboratory Glassware Washer/Dryer 1.02 SUBMITTALS A. Bill of Materials B. Product Literature C. Installation
More informationSmart Comfort Solutions HIGH VELOCITY DRUM FANS
Smart Comfort Solutions HIGH VELOCITY DRUM FANS Direct Drive Drum Fans Direct Drive drum fans are great for heavy duty air circulation in light duty commercial applications where an economical solution
More informationMafo develops and builds a line of standard
For more than 40 years Mafo has been designing and constructing industrial cleaning equipment in stainless steel. The extensive experience and expertise gained in all these years is expressed in the wide
More informationMANUAL VERSION SERIAL # X-1 MINI PRO OWNER S MANUAL ASSEMBLY & OPERATOR INSTRUCTIONS 1.0
SERIAL # MANUAL VERSION 1.0 Introduction WARNING: To limit risk of potential injury and material damage, all users must read these instructions in their entirety and follow them strictly. Check our YouTube
More informationBAND SAW BLADES ALO AL 101 O
BAND SAW BLADES ALO 101 ALO 106 ALO 110 ALO 110K ALO 123 ALO 126 ALO 127 ALO 131 ALO 144 ALO 144-PSS ALO 177 ALO 181 ALO 183 ALO 184-A ALO 184-B ALO 185 ALO 185-C ALO 186 ALO 187-B ALO 191 ALO 191-CP ALO
More informationDS7400Xi Addressable Control/ Communicator
DS7400Xi Addressable Control/ Communicator DS7400Xi DS7400Xi-EXP 110VAC operation 220VAC operation Remotely Programmable WDSRP (Windows Detection Systems Remote Programming Software), allows the systems
More informationFA 36/FA 45 FOLDERS. Easily fold miniature-size leaflets as well as commercial products on the same folder
FA 36/FA 45 FOLDERS Easily fold miniature-size leaflets as well as commercial products on the same folder A FOLDING/ DEFLECTOR PLATES are made of durable chromium-plated steel for anti-static operation
More informationFashion Decoration Home Textiles Technical Textiles Flags & Banners
COLARIS.INFINITI Fashion Decoration Home Textiles Technical Textiles Flags & Banners www.zimmer-austria.com 15 June 2016 page 1 ZIMMER.AUSTRIA 140 years of revolutionary innovation and developments with
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63825-7170 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63825-7100 FEATURES % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
More informationRead these instructions thoroughly before crimping any terminals.
Figure 1 This instruction sheet covers the application and maintenance procedures for Pneumatic Crimping Head Assembly 314991 1. The crimping head assembly is designed for use in Pneumatic Tool 69015 to
More informationTube Cleaners.
Tube Cleaners www.elliott-tool.com Tube Cleaners Table of Contents Pg. Tube Cleaners 2 5370 Jiffy Gun 3 537100C Jumbo Jiffy Gun 4 Jiffy Gun & Jumbo Jiffy Gun Spares & Accessories 5 Soot Buster 5 Soot
More informationSafety Protection System 4 Security Levels 5. Deskside Shredders 6 Centralized Office Shredders 12 High Capacity Shredders 18
Safety Protection System 4 Security Levels 5 Deskside Shredders 6 Centralized Office Shredders 12 High Capacity Shredders 18 Quality Made in Germany 22 Intelligent Document Security 23 Shredders at a Glance
More informationUsed Fluid Handling Portable Used-Oil Gravity Drains
Portable Used-Oil Gravity Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s)
More informationToll Free:
1 ProLine s electric radiant floor heating system is one of the most popular and durable floor heating solutions on the market. Available pre-spaced in mats with an adhesive backing or on the spool, the
More informationCENTRIFUGAL BARREL DEBURRING
CENTRIFUGAL BARREL DEBURRING Centrifugal Barrel Finishing The CPC250 is United s smallest deburring system. The CPC250 is an upright centrifugal barrel deburring machine. It spins along a vertical axis
More informationTetra Pak Linear Moulder 1500 A2 For high capacity production of moulded stick products
Tetra Pak Linear Moulder 1500 A2 For high capacity production of moulded stick products Highlights Highest singel index capacity on the market with multilane wrapping Flexible, modular mould cleaning system
More informationThe All-Inclusive Self-Contained Gas Heated Thermal Fluid Deep Chest Ironer
The All-Inclusive Self-Contained Gas Heated Thermal Fluid Deep Chest Ironer BIGGER, BETTER, STRONGER Chicago combines the latest high efficiency gas burner technology with its proven deep chest ironing
More informationSistema de Detecção Raio-X
Sistema de Detecção Raio-X Descrição: O Sistema de Deteção de Raio-X vem de certa forma complementar ou substituir o convencional Detetor de Metais garantindo desta forma um controlo mais amplo de objetos
More informationIntegrated Packaging Systems, Inc.
Integrated Packaging Systems, Inc. Tablet Filling Liquid Filling Design for your success Bottle Handling Integrated Packaging Systems, Inc. IPS is a leader in design and manufacturing of packaging machinery
More informationFashion Decoration Home Textiles Flags & Banners COLARIS.INFINITI. 8 November 2018 page 1
COLARIS.INFINITI Fashion Decoration Home Textiles Flags & Banners www.zimmer-austria.com 8 November 2018 page 1 ZIMMER AUSTRIA 140 years of revolutionary innovation and developments with well-known quality
More informationTHE EASTMAN On-Line Marking System Service Manual. Please read completely before attempting to operate your new On-Line Marking System.
THE EASTMAN On-Line Marking System Service Manual 68-26186 Patent Pending Please read completely before attempting to operate your new On-Line Marking System. WARNING This machine is equipped with a very
More informationBarrel Blast Cleaning Equipment
Barrel Blast Cleaning Equipment Abrasive Blast Equipment DISA Goff s Barrel Blast #!$%& DISA Goff s airless Barrel Blast machines are the natural choice for economical batch-type blast cleaning and surface
More informationInstructIon Manual KrEs EQuIPMEnt stands
Instruction Manual Instruction Manual SELF-CONTAINED AND REMOTE Kairak KRES model refrigerated equipment stand units are available in many lengths from 36 to 120 inches long. These units are available
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS T CLASS TSA Series 6 to 20 Ton AIR CONDITIONERS 6 20 TONS 506147 01 06/11 Supersedes 3/11 Litho U.S.A. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT The Clean Air Act
More informationUsed Fluid Handling Portable Used Oil Gravity Drains
Portable Used Oil Gravity Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s)
More informationLV-5 Direct Contact Low Voltage Detector and LV-5/K01 Kit including LV-PT Tester, Holster and Available Accessories
LV-5 Direct Contact Low Voltage Detector and LV-5/K01 Kit including LV-PT Tester, Holster and Available Accessories Operating & Instruction Manual 1475 Lakeside Drive Waukegan, Illinois 60085 U.S.A. 847.473.4980
More informationUsers Manual. LAURUS Systems, Inc. - Ph: Fax:
Users Manual LAURUS Systems, Inc. - Ph: 410-465-5558 - Fax: 410-465-5257 - www.laurussystems.com Introduction The rad-d is a security and inspection system that detects emissions from radioactive material.
More information1. STANDARD CONTINUOUS LAMINATING MACHINE FOR THE PRODUCTION OF FLAT WALL PANELS
Proposal and Specification for the supply of continuous Caterpillar Laminating Press to manufacture insulated Wall and DPR Roof panels from Mineral Wool and Expanded Polystyrene (EPS) and PIR/PUR (PU BLOCK)
More informationBASIL 6000 TUNNEL CAGE WASHER
BASIL 6000 TUNNEL CAGE WASHER APPLICATION For thorough, efficient cleaning of cages, debris pans, bottles, feeder bowls, and miscellaneous items used in the care of laboratory animals. DESCRIPTION The
More information96% AFUE Efficiency CONDENSING RESIDENTIAL GAS BOILERS CONTROL WITH ADVANCED USER FEATURES MODELS FROM 80,000 TO 285,000 BTU/HR
CONDENSING RESIDENTIAL GAS BOILERS CONTROL WITH ADVANCED USER FEATURES MODELS FROM 80,000 TO 285,000 BTU/HR 5:1 FIRING RATE MODULATION LESS THAN 20 ppm NOx DIRECT VENT FLEXIBILITY TO 100 FEET 96% AFUE
More informationSYST0101CW Product Specifications
SYST0101CW Product Specifications IONt SYSTEM CONTROL NOTE: Iont System Control compatible with Iont System indoor equipment only. US Patents: U.S. Pat No. 7,243,004, U.S. Pat No. 7,775,452, pointsett
More informationIndustrial Freezer Sales A division of IDS 5311 Derry Avenue Building D Agoura Hills CA Phone (818) Fax (818)
UCUF191S-86, UCUF241S-86 and UCUF281S-86 UPRIGHT ULTRACOLD FREEZERS Control and Alarm Features Manual defrost, adjustable control range from -50 C to -86 C. UL/CUL Listed. Factory preset at -80 C. Advanced
More informationonlinecomponents.com
SIMEZE Terminals 28 Product Facts Terminates all copper magnet wire film insulations Eliminates need for prestripping conductors Moving Beam contact design connects a wide range of magnet wire sizes with
More informationUSER S OPERATING AND INSTRUCTION MANUAL
Walker, Michigan, U.S.A. 49534-7564 USER S OPERATING AND INSTRUCTION MANUAL MODEL 1908-12/17 AUTOMATED PACKAGING SYSTEM 1908S20052CV INDEX SAFETY.....1908S20054 PG. 1-1 UNCRATING.1908S20055 PG. 2-4 QUICK
More informationWE ARE HOTRONIX 2018 CATALOG
WE ARE HOTRONIX 2018 CATALOG PROUDLY MADE IN THE USA Born from the specific requirements of heat transfer materials, Hotronix has been taking the guesswork out of heat applying since the 1980s. Now stronger
More informationSpecial info: Automation
Special info: Automation Our speciality Economic production machines Company survival in this age of transparent markets and global procurement strategies is dependent on optimized and thoroughly rationalized
More informationAGITATOR V DO NOT OPERATE THE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THESE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
AGITATOR 20 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE THE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THESE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use
More informationCountertop Templating & Installation
Countertop Templating & Installation Templating 19.2 Seam & Sink Setters 19.4 Carry Clamp & Carrying Devices 19.6 Countertop Installation Accessories 19.7 Sink & Dishwasher Anchors 19.8 SECTION 19 Templating
More informationFD 90 / FD 95 Rotary Perforators
FD 90 / FD 95 Rotary Perforators 11/2018 OPERATOR MANUAL SECOND EDITION TABLE OF CONTENTS SPECIFICATIONS 1 SAFETY PRECAUTIONS 1 DESCRIPTION 2 INSTALLATION AND OPERATION 3 INFEED TABLE ADJUSTMENT 3 OUTFEED
More informationFT900BD FLIGHT-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 FT900BD FLIGHT-TYPE DISHWASHER STANDARD FEATURES Opti-RinSe system Water usage 120 gph @ 20 psi Microprocessor controls Low temperature alert Blower dryer with 2 H.P.
More information3 rd Generation Automated IBC Control System For Blown Film Lines
3 rd Generation Automated IBC Control System For Blown Film Lines IBC Control Systems D. R. Joseph, Inc. provides the latest in Internal Bubble Cooling (IBC) Control Systems. Our latest 3 rd Generation
More informationVT-3-1 VERTICAL THERMOFORMER
VT-3-1 VERTICAL THERMOFORMER The VT-3-1 Vertical Thermoforming System is designed to give the fastest possible cycle times available with vacuum forming machinery. This is achieved by operating the heating
More informationOPERATING & SERVICE PARTS MANUAL HDS-215 COMBINATION SHRINK SYSTEM
OPERATING & SERVICE PARTS MANUAL HDS-215 COMBINATION SHRINK SYSTEM FOR HOT KNIFE AND IMPULSE MACHINES READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING EQUIPMENT TABLE OF CONTENTS Electrical Requirements
More informationYou are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect.
You are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect. Connectivity and electrical installation A high degree of automation for standardised
More informationBWS 1000 OPERATION AND MAINTENANCE MANUAL
1000 Table of Contents Table of Contents 2 Method of Operation 3 BWS 1000 Built-In Safety Features 4 1. Set -up 5 Inspecting the Unit 5 1.1 Selecting the Location 5 - BWS Items 6 1.2 Powering up the Unit
More informationData Sheet. Self regulating process heating tapes RS stock numbers ,
Data Pack K Issued March 1997 232-3333 Data Sheet Self regulating process heating tapes RS stock numbers 379-889, 379-974 The information contained within this sheet regarding applications and installation
More informationTaco 00 Series Cartridge Circulators
Water Circulation Pumps & Circulators Taco 00 Series Cartridge Circulators For over 70 years, Taco has led the industry with the highest quality circulators you can buy. Designed for a wide range of residential
More informationEquipment Information
VS96DC Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air GmbH Customer Systems Center D4 Park 4 CH-6039 Root-Längenbold Telephone: +41 (0)
More informationOperating Manual Model BP500 and BP500 IJ Tape Dispenser
Operating Manual Model BP500 and BP500 IJ Tape Dispenser Meets UL and CE Electrical and Safety Standards BETTER PACKAGES 4 Hershey Drive, Ansonia, CT 06401 Website: www.betterpackages.com BP P/N: MAN-500-OPR
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section CHLORINE GAS LEAK DETECTOR
Section 11263 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and installation of chlorine leak detectors as shown on Plans and specified herein. 1.02 MEASUREMENT AND PAYMENT No separate
More informationInfrared Heaters For Controlled Concentrated Curing
Infrared Heaters For Controlled Concentrated Curing Model 6020 Infrared Heat. Instantaneous Results. The Model 6020 DryIR infrared heater is designed for drying applications that require a clean, responsive,
More informationOverview. rotary microtomes
rotary microtomes Overview All SLEE microtomes are produced at the company s seat in Mainz, Germany. The highly precise, modularly built rotary microtomes range from a manual unit, type CUT 4062, via the
More informationModel GW1020 Laboratory Glassware Washer General Specifications
Model GW1020 Laboratory Glassware Washer General Specifications 1.0 General Description The Model GW1020 Laboratory Glassware Washer is a high capacity spray cabinet washer specifically designed to clean
More informationALUMINUM REPAIR CERTIFICATION EQUIPMENT. Eliminate hazardous aluminum dust with a Eurovac system. BODY REPAIR CERTIFICATION EII Wet Mix Dust Collector
ALUMINUM REPAIR CERTIFICATION EQUIPMENT Eliminate hazardous aluminum dust with a Eurovac system BODY REPAIR EQUIPMENT OPTIONS Product Description When repairing an aluminum structured vehicle, it is essential
More informationSECTION LOW VOLTAGE LIGHTING CONTROLS
SECTION 26 09 26 LOW VOLTAGE LIGHTING CONTROLS PART 1 - GENERAL 1.01 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
More informationFRP HEATING SYSTEM INSTALLATION, OPERATION & MAINTENANCE MANUAL FRP.IOM.R1
FRP HEATING SYSTEM INSTALLATION, OPERATION & MAINTENANCE MANUAL FRP.IOM.R1 Hotfoil, Inc. Robbinsville, NJ 08691 Phone: 609.259.4118 / Fax : 609.259.4119 http://hotfoil.com TABLE OF CONTENTS I Product Specification
More information