C L E A N I N G G U I D E

Size: px

Start display at page:

Download "C L E A N I N G G U I D E"

Stanley Moore
5 years ago
Views:

1 C L E A N I N G G U I D E T hank you for purchasing the HI-FI JE T. T he FJ-50/40 provides the highest quality printing possible with a resolution of 1440dpi and 6 colors of ink. Dust has a big influence on printing quality. Some dust can not be removed perfectly even with the built-in head cleaning function. If the printing result doesn't improve even after performing the built-in head cleaning function, please clean the Heads manually by referring to this guide. Please perform the manual head cleaning as quickly as possible by following the steps carefully. Ink could dry up and cause the head to clog when inkjet heads are out from their original locking position for a long time. Please perform manual head cleaning all the way to the end once started. July16,1999Ver.1.3

1 / Turn off the power while pressing the key.

.. 3 / Move the Print Head towards the left side with your hands.

2 1 / Turn off the power while pressing the key. 2 / R emove the B lack Cover as below.. Use the screw driver to unfasten the 4 screws fixing the B lack Cover.. When B lack C over is removed... 3 / Move the Print Head towards the left side with your hands. It is slightly heavy. Use a little strength when pulling it. 4 / Now, you should find the R ubber Cap, Sponge and T ubes as shown below.. S ponge R ubber C ap (B lack color) Tube (White color)

5 / Put some Cleaning L iquid on the Cleaning Stick. N O T E S! Put the Cleaning L iquid on the Cleaning Stick, if necessary, when performing the procedure after 6.

Don't squeeze the sponge when removing the dust inside the sponge. Use the edge of the Cleaning Stick to rub out the dust. Don't use other tools than the Cleaning Stick for cleaning.

3 5 / Put some Cleaning L iquid on the Cleaning Stick. N O T E S! Put the Cleaning L iquid on the Cleaning Stick, if necessary, when performing the procedure after 6. C leaning Liquid C leaning S tick 6 / R emove the dust around both L eft and R ight R ubber Caps with the Cleaning Stick. Don't touch the sponge inside the rubber cap if there is no dust. Don't squeeze the sponge when removing the dust inside the sponge. Use the edge of the Cleaning Stick to rub out the dust. Don't use other tools than the Cleaning Stick for cleaning. C leaning S tick 7 / Next, remove the dust around the Heads with a Cleaning Stick. T here are two Heads aligned as below. Don't touch the surface of HE AD. Don't touch the surface of HE AD. Clean the portion of the Heads as indicated on the next page. It is easier to clean the head by moving the HE A D instead of moving the Cleaning Stick as shown in the picture on the next page.

Don't wipe or touch the surface of the HE A D. Wipe only the metal part of the HE A D.

R emove the dust stuck to the Cleaning Stick with tissue paper each time after cleaning.

B end the Cleaning Stick as shown below to clean the back rear side of the Head.

One side of the Wiper is made of Felt and the other side is made of R ubber. (L eft side.

4 Don't wipe or touch the surface of the HE A D. Wipe only the metal part of the HE A D. It is not necessary to wipe the HE A D hard, but just enough that the dust is removed. R emove the dust stuck to the Cleaning Stick with tissue paper each time after cleaning. C lean the left edge of the HE AD. C lean the right edge of the HE AD. B end the Cleaning Stick as shown below to clean the back rear side of the Head. 8 / Clean the Wiper using the Cleaning Stick the same as cleaning the HE A D. One side of the Wiper is made of Felt and the other side is made of R ubber. (L eft side..felt, R ight side...r ubber) Clean mainly the R ubber side and the top part. Felt becomes fluffy when it is rubbed strongly. R emove the dust by rubbing it very softly. Wiper

Perform the cleaning as quickly as possible. Ink could dry up and cause clogged nozzles should it takes too long to perform this operation.

5 9 / Clean the metal part of the Head Carriage with the Cleaning Stick. Head C arriage 1 0 / R eturn the HE A D to the locking position with hand, and turn on the power by pressing the key. T hen, perform head cleaning by pressing the CLEANING key. Perform the cleaning as quickly as possible. Ink could dry up and cause clogged nozzles should it takes too long to perform this operation. If the printing results don't improve even after performing the head cleaning several times, please contact R oland or A uthorized Dealer. 1 1 / Turn off the power by pressing the key. Put back the B lack Cover which was removed in 2. Top part of the B lack Cover should be under the Top Cover. Top C over B lack C over

Daily care manual. Table of contents

Daily care manual. Table of contents Daily care manual Request for daily care Inkjet plotter is the precision machine that has highly delicate mechanism. Especially, little dust and paper powder may have effect on a head nozzle firing ink,