H&T Household Thermostat Design Introduction

Transcription

1 H&T Household Thermostat Design Introduction Year 2011

2 Content The working principle and characteristics of thermostat H&T thermostat design features H&T thermostat design advantage H&T thermostat main technical parameters

3 The working principle and characteristics of thermostat Working principle: Integrated programming software and the realization of intelligent temperature control switch, to be freely adjusted the indoor temperature, and according to user requirements setting various time switch and preset modes which can be automatically adjusted the room temperature; so as to achieve the comfortable temperature and saving energy purpose. Characteristic: Save Precise temperature control, plus time to set the temperature, automatic control of central air-conditioning system operation, no diurnal heating, obviously power saving. Comfortable During the period of every morning, daytime, evening and night, room temperature can be automatically adjusted. No need to wait for room temperature raising up during winter time before getting up in the morning or arriving home in night. Convenient Automatic control of central air-conditioning running every day, replacing manual operation, more convenient for working family; automatic start of central air conditioning when room temperature is too low, only a little power is needed to achieve antifreeze protection.

4 H&T thermostat design features Program features:friendly man-machine interface, the use of ascension, compatibility enhancement.

5 H&T thermostat design advantage Design advantage: 1. Optimization design of touch screen interface, reduces the operation of the user and the learning time. 2. ZigBee compatibility, support for Smart Energy. support Smart Energy Optimization design of touch screen interface

6 H&T thermostat main technical parameters Technical parameters table 1 Application Programmable Switching Switch position ( system ) Switch position ( fan ) Power supply mode Terminal code Conventional system and heat pump system 7 day programmable Automatic / manual optional Heating - off - - Automatic - Emergency heating refrigeration Automatic - Open - loop A battery or a hard line R,RC,C,W(O/B),Y,G,S1,S2

7 H&T thermostat main technical parameters Technical parameters table 2 Installation Frequency Frequency Temperature setting range(f) Temperature setting range(c) Temperature tolerance(f) Horizontal 60Hz 50Hz Heating: 40F to 90F; cold water: 50F to 99F Heating: 4.5C to 32C; cold water: 10C to 37C ± 1F Temperature tolerance(c) ± 0.5C Switching Heating / Cooling optional

8 H&T thermostat main technical parameters Technical parameters table 3 Outdoor sensor Remote sensor Sensor part Yes, Optional outdoor or indoor remote Yes, Optional outdoor or indoor remote Electric regulator Heating current Operating current of 1.0A Cooling current Operating current of 1.0A Fan current Operating current of 0.6A Operation humidity range(%rh) Remark 5 to 90%RH, no condensation Optional single heating or cooling Voltage 24Vac

9 Function 1:System set Heat Cool Auto OFF Click on the red area setting system working mode, click exit setup complete Heat: Thermostat control only heating system. Cool: Thermostat control only cooling system. Auto: Thermostat control pending on the indoor temperature automatic selection of heating or cooling system. Off: Heating and cooling system shutdown.

10 Function 2:Fan set Click on the red area sets the fan working mode, click exit setup complete Refresh ON OFF Refresh: During the period of cooling or heating, choose a ventilation stage. On: Whether the system is working, the fan turns ON. Off: Whether the system is working, the fan turns OFF.

11 Function 3:Indoor temperature or humidity display Click the red region selection main display area displays indoor temperature or humidity, Click to exit, The main display area displays the indoor temperature. Outdoor Temperature Humidity: In the main display area to display the indoor humidity. Outdoor temperature: In the main display area to display outdoor temperature (when outdoor sensor is installed) - optional

12 Function 4:Energy consumption status logo Click the red area to switching energy consumption logo, click Set to complete and exit. Energy Saving:Display set temperature energy saving level. Price:Display the current electricity price. Battery Status:Display the battery power. NOTE:When the battery power is low, in the absence of operation, regardless of the setting, it will show the battery warning.

13 Function 5:Time setting In the main menu, click on the lower right corner of the current time, the interface will appear Click or to set time. Set time set hours and minutes, by clicking on the time or toggle button, corresponding to hours or minutes will flash. NOTE: At different times, display position changes. Click the time position can be required for operation.

14 Function 6:Time and temperature settings By clicking on the middle of the picture for four time periods, the main display area can display the time of the heating temperature, a sub display area can display the time of the cooling temperature. Time will show from the beginning to the end of operation. Set time to wake up Set time to leave home Set time to go home Set time to sleep Set the cooling temperature Set the heating temperature NOTE:Four time zones will not be displayed at the same time, any moment will only show the time period ends of time. Selected time, time zone will flash; selected heating temperature," heat" character blinks, selected refrigeration temperature," cool" character will flash.

15 Function 7:Setting the operating parameters Figure 1 In the main menu, click on the HOME button, set the time period, as well as the heating temperature, the cooling temperature. Click the HOME button in Figure 1, Click one of the four time periods from the central display, Choose time, press or to set the time. Choose temperature, press or to set the heating or cooling temperature. Click other time periods, setting time, heating and cooling temperature, and repeat for others. Click to complete set. Figure 2 NOTE:In the temperature setting, the top right corner of Figure 2 shows energy saving level, level 5 the highest level, level 0 minimum, is not recommended to set the temperature.

16 Function 8:7 day programmable settings Figure 1 Figure 2 In the main menu, click on the Schedule button, set 7 day programmable period, as well as the heating temperature, the cooling temperature. Click the Schedule button in Figure 1, Click in Figure 2 above, choose one day, Click in Figure 2 intermediate four time pictures, select a time period. Choice time, through or to set the time. Choice of temperature, through or to set the heating or cooling temperature. Choose another day in seven days, the days and the corresponding time period of heating and cooling temperature. Click complete set. NOTE:In the setting temperature, the top right corner of Figure 2 shows energy saving level, level 5 the highest level, level 0 minimum, is not recommended to set the temperature.

17 Function 9:Leave the setting Figure 1 Figure 2 In the main menu, click on the Away button, to set the Home Away ( such as vacation ) system operating parameters. The parameter setting will be defaulted by system, regardless of the programmable parameters, until the user cancels settings or at the end of time setting. Click Away button in the main interface as Figure 1, Choice of temperature, through or to set the heating or cooling temperature. Keep time, setting time, a maximum of 99 days. NOTE: Once set, system twenty-four hours a day to work until the user clicks the parameter, Done cancel, or set to keep time reduced to 0 and then the system applies programming operation parameters.

18 Function 10:Screen lock The main interface, the top right corner of the screen icon flash, means that screen is not locked, any operation can be performed. If you click on the icon, the screen will be locked and icon stop flashing and all functions keys will be disabled. Click the icon again, the screen will unlock. Lock screen can be used for cleaning up the screen or preventing any accidental mis-operation.

19 Function 11:other setting In the main interface, click on the Setup button, you can set other working parameters. Figure 1 Click setup button in the main interface as Figure 1, In Figure 2 the interface click selection function, Through or set the corresponding parameters, Click finish and save the settings. Figure 2 NOTE:The main display area of the display function code, 01 ~ 17, the first time to display the function setting.

20