Sources of Graywater

Size: px

Start display at page:

Download "Sources of Graywater"

Melina White
5 years ago
Views:

1 What is Graywater? Graywater is wastewater generated from domestic activities such as laundry and bathing, which can be recycled on-site for uses such as landscape irrigation and constructed wetlands.

2 Sources of Graywater Graywater Showers/baths Clothes washer Sinks (bathroom sinks) Blackwater (NOT allowed for reuse) Toilets Clothes Washer w/ diaper wash water, greasy rags, other chemicals Kitchen sinks or dishwashers 2

3 Qualities of Graywater High amounts of suspended solids Nutrients fats and oils Hair Lint Soaps, cleaning products Bacteria that can rapidly multiply to turn graywater into blackwater Basic (alkaline) Consistent production, does not vary according to irrigation requirements 3

4 Soaps and water quality Recommended products: salt & boron free Liquid laundry detergent Oasis, ECOS, Biopac, & more Things to avoid for happy plants: Salt (sodium compounds) Boron (borate) Chlorine bleach (hydrogen peroxide bleach okay) For graywater systems with filters: avoid bar soap made with fats that can easily clog filters. 4

5 Benefits of Graywater Lower potable water use Saves energy used to produce and distribute potable water; along with energy saved from the transport and treatment of wastewater Groundwater recharge Returns nutrients to the soil Effective water treatment occurs in the biologically active upper region of the soil Reduces demand on wastewater treatment plants and septic systems Allows septic systems to work more efficiently Connects homeowners or customers to how much water they are using and their product choices Reliable landscape water source during drought or water shortage 5

6 Cost Benefit Analysis Important to consider cost benefit of a proposed graywater system Complex systems have a high financial cost as well as an environmental impact Are the water savings sufficient to justify the proposed system? More simple graywater systems have a lower cost and impact but don t offer high levels of irrigation efficiency Cost benefit analysis can be shifted in certain situations: Failing septic Emergency water shortage Large volumes of graywater 6

7 When Not to Use Graywater Insufficient space to sustainably infiltrate water Inaccessible drain pipes, e.g. plumbing encased in concrete slab Unsuitable climate, e.g. very wet, irrigation is of little benefit, freezing may prevent use for part of year Close proximity to streams or lakes, or water wells, may cause surface or drinking water contamination Unsuitable soil Extremely permeable, may cause contamination Impermeable, may cause runoff or ponding 7

8 Potential Graywater Production 10 minute shower 3.5 gpm shower head = 35 gallons 2.5 gpm shower head = 25 gallons 2.0 gpm* shower head = 20 gallons 1.5 gpm shower head = 15 gallons *Current CALGreen Plumbing Code 1 load of laundry* Top loader = gallons Front loader = 15 gallons *Estimated, refer to manufacturer specifications for actual number 8

9 Potential Vs. Realized Water Savings Important to recognize that graywater production is not equal to water savings Water savings typically only occur during the irrigation season (unless water is treated) Potential water savings depend on irrigation efficiency of graywater system being installed compared to pre-existing system Improper designs won t save water Irrigation efficiency of different system types varies significantly Environmental impact may offset benefits of higher efficiency Realized water savings depend on effective water management 9

10 Graywater System Design Considerations. To pump or not to pump? Gravity fed: Laundry to landscape, branched drain Simple and robust Low maintenance Relatively inexpensive No supplemental electricity Low water use efficiency (mulch basins) Best for trees and shrubs Pumped Systems Higher water use efficiency (drip if filtered) Ability to send water uphill and long distances Increased cost and complexity Higher environmental impact offsets water use efficiency 10

11 System Design Overview: Laundry to Landscape Doesn t alter existing plumbing No permit required (if guidelines are followed) Easy to install Low cost 11

12 Mulch Basin Mulch Basins may be used as an irrigation or disposal field for graywater. Prevent runoff Prevent pooling (exposure) Provide surge capacity if sized correctly As long as mulch basins are at least 1 ft. deep and sized according to Table sufficient surge capacity is ensured Discharge 2 in. under mulch shield for code compliance 12

13 Laundry to Landscape Systems

14 Laundry to Landscape Systems A laundry-to-landscape graywater system captures graywater from the discharge hose of your washing machine, enabling you to reuse the water without altering the existing plumbing in your home Graywater is distributed through an irrigation line with outlets directing water to mulch basins close to specific plants

15 Laundry to Landscape Collection Plumbing Captures graywater from the discharge hose of your washing machine Diversion upstream of drainpipe No alteration to existing plumbing Washing machine pump used to distribute graywater Water is slightly pressurized so the system is less demanding of strict grade (fall) than a gravity-only system 3-way diverter valve diverts water either to the landscape or the septic/sewer Vacuum breaker or anti-siphon component on the landscape side of the 3-way valve

Laundry to Landscape System Overview Indoor A. Brass 1" 3-way valve B. PVC 1" Male Adapter (S x MPT) C. Barbed 1" Male Adapter (MPT) D. PVC 1" 90 Elbow E. PVC 1" Tee F. PVC 1.5" x 1" Reducing Bushing (SxS) G.

16 Laundry to Landscape System Overview Indoor A. Brass 1" 3-way valve B. PVC 1" Male Adapter (S x MPT) C. Barbed 1" Male Adapter (MPT) D. PVC 1" 90 Elbow E. PVC 1" Tee F. PVC 1.5" x 1" Reducing Bushing (SxS) G. PVC 1.5" Female Adapter (FPT x Slip) H. Auto-vent or Air Admittance Valve 1.5 Outdoor J. Barbed 1" Adapter (BxS) K. Barbed 1" Tee L. Barbed 1" x 1/2" Reducing Tee M. Poly 1/2" Tubing N. 8-7" round valve box O. Green Back Valve Barbed 1/2" P. Barbed 1" Coupling

17 Laundry to Landscape Collection Plumbing 3-way diverter valve; Auto vent; 1" pipe (PVC); Swing check Backflow preventer (if water is going uphill) Photo: Greywater Gardens

18 Laundry to Landscape - Step by Step Laundry to Landscape collection plumbing: Step 1: Connecting the 3-way diverter valve Step 2: Anti-siphon component Step 3: Drilling hole for pipe to exit Step 4: Plumb to hole Step 5: Plumb to sewer connection Step 6: Strap pipe/diverter valve Step 7: Label pipe and 3-way diverter valve

19 Step 1: Connecting the 3-way diverter Valve 1 PVC male adapter 1 -brass 3-way diverter valve 1 schedule 40 PVC pipe 1 PVC barbed male adapter Hose clamp Washer hose (from machine)

Step 1: 3-Way diverter valve Configurations

Use teflon tape (on threads) and glue (on

20 Step 1: 3-Way diverter valve Configurations a. Diverter valve must be above flood rim of machine b. Washer hose must connect to middle port c. Use teflon tape (on threads) and glue (on slip connections) to make water-tight connections d. Secure with pipe clamps

21 Step 1: Teflon Tape Threaded Fittings Teflon tape helps prevent leaks Wrap tape CLOCKWISE several times over Don't cross-thread when screwing fitting into 3-way diverter valve Tighten with channel locks

proper sized barbed adapter ¾ x 1 threaded bushing ¾ barbed male adapter If hose

22 Step 1: Troubleshooting tips for Connecting Washer Hose Washer hose doesn't fit onto 1 barbed adapter If hose is too large or small use threaded bushing with proper sized barbed adapter ¾ x 1 threaded bushing ¾ barbed male adapter If hose is slightly too small heat hose with hair dryer or hot water, then forcefully push on

23 Step 1: Troubleshooting tips for Connecting Washer Hose Washer hose connection leaks (rigid hose) Tighten hose clamps, add 2 nd hose clamp Connect with piece of vinyl tubing

AAV, in-line vent breather tube any vent tall enough not to emit water Must

24 Step 2: Anti-siphon Component Used to prevent a potential siphon from forming and draining the machine as it tries to refill Options Autovent, AAV, in-line vent breather tube any vent tall enough not to emit water Must be at high point of system Must be accessible in case of leaks and for replacement

25 Step 2: Anti-siphon Assembly Autovent 1 ½ threads 1 ½ FPT (female pipe threads) by slip coupling Reducing bushing 1 ½ x 1 slip

26 Step 2: Placement of Anti-Siphon High point Accessible/visible (not behind a wall)

27 Step 3: Drilling Hole for Pipe to Exit a. Look for potential issues electrical lines, insulation type, gas pipes, etc b. Drill a ¼ pilot hole c. If no obstructions, drill hole for 1 PVC with d. 1½ holesaw drill from outside in, and inside out for a clean looking hole e. Use proper bit for your wall/floor wood bit, stucco bit, etc

28 Step 4: Plumb to Hole Cutting PVC pipe Use PVC cutters or handsaw Remember to calculate the length of pipe that will slip into the fitting when figuring your measurements Use as few fittings as possible to minimize friction

29 Step 5: Plumb to Sewer Connection Gluing PVC Use Gorilla PVC glue if possible (it's much less toxic than regular PVC primer and glue) 1. Clean and dry pipe 2. Apply glue to the inside of the fitting hub first 3. Apply glue to the outside of the pipe 4. Push together quickly, inserting all the way, rotate slightly to spread glue evenly, and hold a second as it will try to push out

30 Step 6: Strap Pipe/Diverter Valve Use 2-hole straps or plumbers tape Add wood blocking as necessary Strap so diverter valve is secure

31 Step 7: Label Pipe and 3-way Diverter Valve Label pipe: Caution: Non-potable water, do not drink Label diverter valve showing direction of graywater

32 Activity 1: Identifying Parts Identify and label the images in your Activity way valve 2. PVC 1-in. male adapter 3. 1-in. barbed male adapter 4. Hose clamp 5. PCV 1-in. x 1.5 in. bushing 6. Auto vent 7. 1-in. PVC tee 8. 1-in. schedule 40 PVC pipe

33 Laundry to Landscape Systems

34 Laundry to Landscape Distribution Laundry to landscape distribution Step 1: Piping to irrigation field Step 2: Calculate and dig mulch basins, build mulch shields Step 3: Trench to mulch basins Step 4: Lay tubing Step 5: Test and tune system

Step 1: Piping to Irrigation Field You may have to

across the driveway and patch in Maintain a downwards

35 Step 1: Piping to Irrigation Field You may have to pipe around decks, patios, etc. You may need to bypass hardscape Options: go under it, go around it, remove it, cut a strip of it, cut across the driveway and patch in Maintain a downwards slope Paint exposed PVC pipe to protect from UV Caulk holes at building exit points

Step 2: Mulch Basins Refer to Class 3 and Table 1602.

36 Step 2: Mulch Basins Refer to Class 3 and Table , for information on sizing the irrigation area Plan for mature plant size Type of Soil Coarse sand or gravel Minimum sqft of Max irrigation area absorption per 100 gallons capacity of graywater/ (gallon/sqft/ day day) Fine Sand Sandy Loam Sandy Clay Clay w/ considerable sand or gravel Clay w/small amounts of sand or gravel

37 Step 2: Mulch Shields The purpose of a mulch shield is to provide graywater water outlet pipes with protection from soil and plant roots Can use small valve boxes or inverted plant containers Graywater discharge 2 in. under mulch shield for code compliance

Step 3: Trench to mulch basins Dig a trench, about 4 inches deep, from the PVC pipe to the first mulch basin Continue the trench to all the basins, taking the most direct route possible

38 Step 3: Trench to mulch basins Dig a trench, about 4 inches deep, from the PVC pipe to the first mulch basin Continue the trench to all the basins, taking the most direct route possible while avoiding sharp turns If possible, maintain a slight downward slope or at least a level gradient If the system has dips and rises, it will be more difficult to get even distribution of water

39 Step 3: Slope Protect your washing machine's pump: Flat yard- no more than 50 ft. Don't pump more than 2' above the rim of the machine With friction loss every 50' flat = 1.5' rise Downhill slope - no rule on distance Uphill slope - not recommended! Use a swing check valve to prevent back flow into the machine

inch x ½ inch barbed tee into the tubing Attach short section of ½ inch poly

40 Step 4: Lay Tubing Roll HDPE tubing out in the trench to mulch basins Stake tubing so that it stays in place At each irrigation point, cut the tubing and insert a 1 inch x ½ inch barbed tee into the tubing Attach short section of ½ inch poly tubing and insert into mulch shield Maintain 1 inch open end at some point in the system

burying tubing to include in O&M manual Bury tubing Caulk holes inside

41 Step 5: Test and Tune System Test system for leaks and operation before burying pipes and tubing Tune flows in the system Take photos before burying tubing to include in O&M manual Bury tubing Caulk holes inside and out Post signs Post O&M Manual Adjust angle of tees Adjust ball valves

plumbing for greywater

plumbing for greywater october 2015 christina bertea ~union trained journeywoman plumber (1978) ~plumbing contractor (1996) ~greywater action singingwater@jps.net plumbing for greywater basic parts of