Vacuum Lifting Device for Turning & Tilting

Transcription

1 7001-DS 7211-DS DS DSG 7005-ADS 7011-ADS Vacuum Lifting Device for Turning & Tilting These vacuum lifting units can be used to move vertically positioned plate material.

2 For example, we have moved glass, aluminium plate, plastic and ceramic plate, coated chipboard, metal plate, whole façade elements, glazed windows and lots more besides. The surface to be lifted does not necessarily have to be smooth and flat. Even lifting of convex or concave curved material does not present any problem. We can offer units with integral or external vacuum generation. Mains electricity, battery powered or compressed air driven vacuum production oder aber druckluftbetriebene Vakuumeinheiten zur Verfügung. Turning and tilting movements are carried out manually and are easily accomplished, even for parts with large dimensions. We also supply our unit range with twin circuit technology. Customized products pose no problem. Take advantage of the experience we ve gained in the production and application of vacuum lifting units since You can contact us at: Telephone: / Fax: / info@pannkoke.de DB#_zum_Drehen&Schwenken_GB.doc /2

3 Groups of Devices Vacuum Lifting Devices Type Description Description Group of Device Frame Kombi Carrying Frames without Vacuum Generation Carrying Frames with mains-operated, electrical vacuum pump Vacuum Unit mains-operated, electric Vacuum Unit 7002 Frame Venturi device Accu (Rechargeable Battery) Device Kombi Accu (Rechargeable Battery) Vacuum Unit Manipulation device Manipulation Device Kombi Carrying Frames with hand-operated vacuum pump Carrying Frames with Compressed air-operated vacuum pump (venturi jet) Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump mains-independent, electric (rechargeable batteryoperated) Vacuum Unit Carrying Frames with mains-operated, electrical vacuum pump and pneumatic drive Carrying Frames with compressed air-operated vacuum pump (venturi jet) and pneumatic drive Carrying Frames with mains-operated, electrical vacuum pump and electrical drive VT_Info_09_Gerätegruppen_GB.doc /4

4 Groups of Devices Vacuum Lifting Devices Type Description Description Group of Device Manipulation device Carrying Frames with 7035 compressed air-operated vacuum pump and electrical drive Manipulation device Carrying Frames with 7037 mains-independent, electrical (batteryoperated) vacuum pump and pneumatic drive Kombi Carrying Frames with 7041 mains-independent, electrical vacuum pump and electrical drive Kombi Vacuum Unit Venturi device Carrying Frame with mains-operated, electrical vacuum pump with 2-circuit-technique for the latest safety standard of the EC mains-operated, electric Vacuum Unit with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with Compressed air-operated vacuum pump (venturi jet) Accu (Rechargeable Battery) Device Kombi with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump 7211 VT_Info_09_Gerätegruppen_GB.doc /4

5 Groups of Devices Vacuum Lifting Devices Type Description Description Group of Device with 2-circuit-technique for the latest safety standard of the EC Accu (Rechargeable Battery) Vacuum Unit Manipulation Device Kombi Kombi mains-independent, electric (rechargeable batteryoperated) Vacuum Unit with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with compressed air-operated vacuum pump (venturi jet) and pneumatic drive with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with mains-operated, electrical vacuum pump and electrical drive with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump and electrical (battery-operated) drive with 2-circuit-technique for the latest safety standard of the EC Accu (Rechargeable Battery) Device Kombi Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump with 4-circuit-technique for the latest safety standard of the EC 7411 VT_Info_09_Gerätegruppen_GB.doc /4

6 Groups of Devices Vacuum Lifting Devices Type Description Description Group of Device Kombi Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump and electrical (battery-operated) drive with 4-circuit-technique for the latest safety standard of the EC 7441 VT_Info_09_Gerätegruppen_GB.doc /4

7 Possibilities of the Transport Movements Vertical Horizontal Turning tilting vertical horizontal horizontal - vertical tilting only vertical horizontal picking-up vertical horizontal horizontal vertical only via the lower edge VT_Info_03_Bewegung_GB.doc /1

8 Visit our Internet-Page

9 Table of Contents Vacuum Lifting Devices for Turning & Tilting Which Device Groups are available? Table of Contents Device overview A Comparison of the Device Groups The Safety_Requirements of Vacuum Lifting Devices since within the EU Questionnaire for the Selection of a Vacuum Lifting Device 7000-xx Frame Carrying Frame without vacuum generation 7212 Accu Vacuum Unit battery-supplied, electric vacuum pump 7212-HANDY HANDY3 (2KS) (2KS) 7000 ADS 7002 Vacuum Unit mains-operated, electric vacuum pump 7001-xx Kombi Carrying Frame with mains-operated, electric vacuum pump 7002-Standard 7012 Accu Vacuum Unit battery-supplied, electric vacuum pump 7001-ADS SO DS 7012-Handy 7012-HANDY HANDY Vacuum Unit mains-operated, electric vacuum pump 7202-HANDY2 (2KS) IV_01_Geräteübersicht_drehen&schwenken_GB.doc /2

10 7011 Accu Device Kombi Carrying Frame with battery-supplied, electric vacuum pump Table of Contents Vacuum Lifting Devices for Turning & Tilting 7005 Venturi Device Carrying Frame with compressed air-operated vacuum pump / venturi jet(s) 7011-ADS 7011-ADS SO DS Custom Version & Accessories to 7011-DS 7011-DS SO DS DSG 7005-ADS 7005-ADS/E 7005-DS Glazing Device 7211 Accu Device Kombi Carrying Frame with battery-supplied, electric vacuum pump 7211-ADS_Umb 7211-DS_Umb 7211-ADS 7211-DS DS DSG DS DSG3 (2KS) (2KS) (2KS) (2KS) (2KS) (2KS) (2KS) (2KS) 7211-TML (2KS) Glazing Unit Elefant Glazing Unit Giraffe Glazing Device for the roof glazing from inside Giraffe 2KS (2KS) Glazing Device for the roof glazing from inside 7011-F1200SO Glazing Unit Balance Counter weight with Vacuum Lifting Device or as supplement for a Vacuum Lifting Device Balance 2KS (2KS) Counter weight with Vacuum Lifting Device or as supplement for a Vacuum Lifting Device IV_01_Geräteübersicht_drehen&schwenken_GB.doc /2

11 Overview Vacuum Lifting Devices for Turning & Tilting Device Type No of vacuum circuits ( ) 7000-ADS X X X X 7001-ADS SO X X X X X 7001-DS X X X X X 7005-ADS X X X X X 7005-ADS/E X X X X X 7005-DS X X X X X 7011-ADS X X X X X 7011-ADS SO X X X X X 7011-DS X X X X X 7011-DS X X X X X 7011-DS SO X X X X X 7011-DSG X X X X X X 7211-ADS X X X X 7211-ADS_Umb X X X X 7211-DS X X X X X 7211-DS X X X X X X 7211-DS X X X X X X IV_03_Geräteübersicht_drehen&schwenken_GB.doc /2

12 Overview Vacuum Lifting Devices for Turning & Tilting Device Type No of vacuum circuits ( ) 7211-DS_Umb X X X X 7211-DSG X X X X X 7211DSG X X X X X 7211-TML X X X Elefant X X X Giraffe X X X X IV_03_Geräteübersicht_drehen&schwenken_GB.doc /2

13 #TB_Sicherheitsanforderung_GB.doc Safety Requirements for Vacuum Lifting Devices

14 Visit our Internet-Page

15 Safety Requirements Safety requirements for vacuum lifting devices taken from the European Standard EN 13155:2003 This draft for safety requirements of non-fixed load lifting attachments makes some essential requirements on a vacuum lifting device, which have to be fulfilled by each load suspension device and some only by vacuum lifting devices. Also, safety requirements for grabs and tongs are defined in this draft. The title of this standard is: Krane Lose Lastaufnahmemittel Cranes Non-fixed load lifting attachments Appareils de levage à charge suspendue Equipements amovibles de prise de charge This standard is valid in all the EU countries. All new load lifting attachments brought into circulation since the must conform to this standard, this, at least, is our understanding. The forward to this standard contains the following: This document (EN 13155:2003) has been prepared by Technical Committee CEN/TC 147 Cranes - Safety, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2004, and conflicting national standards shall be withdrawn at the latest by January This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). To determine the relationship to the EC Directive, see the information in Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Section 5 lists safety requirements and or measures. Particular requirements relating to vacuum lifting devices are given under point of the standard. VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

16 Safety Requirements Requirements Vacuum lifters shall be dimensioned to hold at least a load corresponding to two times the working load limit at the end of the working range and the beginning of the danger range respectively at all intended angles of tilt. The maximum angles of tilt shall be increased in accordance with NOTE: The pressure range within which it is possible to work is termed the working range. The danger range adjoins the working range. In some vacuum lifting systems, in particular self-priming vacuum lifters, the resultant pressure decrease depends upon the weight of the load Non-self-priming vacuum lifters shall be equipped with a pressure measuring device clearly showing the working range and the danger range of the vacuum Self-priming vacuum lifters shall be equipped with an indicator showing to the operator that the end of the working range is reached The measuring device or the indicator respectively shall be fully visible for the slinger or, if there is no slinger, for the driver of the crane when in his normal working position. Solutions at Pannkoke The loading capacity of our built-in suction cups has a 2-fold safety factor at the minimum permissible depression. The suction cups 388 were tested in the Fachhochschule Kiel with both a slide-off and a pull-off test. The suction cup 388 carrys 100 kg with a 2fold safety factor. Our control vacuum meter has already been in use since the seventies and each of our vacuum lifting devices has such a control vacuum meter. The working range is marked green, the danger area red. This type of device is not manufactured by Pannkoke. Each vacuum lifting device with built-in electric vacuum generation has a control vacuum meter, an acoustical and an optical warning signal which indicates a too low partial vacuum and this since the beginning of the eighties. Rechargeable battery-operated vacuum lifting devices have been equipped since 2000 with two optical warning signals. Optionally we offer a large flash lamp as warning means and this is available for all electric operated devices with 2KS technology. Compressed air powered vacuum lifting devices have had a control vacuum meter and an acoustic warning signal since Means shall be provided to prevent the risks due to vacuum losses. This shall be: VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

17 Safety Requirements Requirements a) in the case of vacuum lifters with a vacuum pump: a vacuum reservoir with a non-return valve between the vacuum reservoir and the pump, located as close as possible to the vacuum reservoir b) in the case of vacuum lifters with Venturi-systems: a pressure reservoir tank or vacuum reservoir tank with a non-return valve between the vacuum reservoir and the Venturi system, located as close as possible to the vacuum reservoir; c) in the case of turbine vacuum lifters: a supporting battery or an additional flywheel-mass; d) in the case of self-priming vacuum lifters: a reservestroke at least equal to 5 % of the total stroke of the piston.. NOTE: Vacuum losses can occur for example, due to leaks, or in the case of non self-priming vacuum lifters, due to a power failure. Solutions at Pannkoke The carrying frame or parts of the carrying frame of our vacuum lifting devices are constructed in general as a vacuum tank. At the newer devices' type a will recognizable vacuum tank is used and it doesn't belong to the carrying parts. The tightness of the system is tested before delivery. Only devices which lose less than 5 % vacuum within 15 minutes will be delivered. With the rechargeable battery operated vacuum lifting devices there is also the fact that if the vacuum falls below a certain limit during use, the vacuum will be increased via the accumulator vacuum pump. Only compressed air powered vacuum lifting devices with a closed vacuum system have been manufactured since The carrying frame or parts of the carrying frame of our vacuum lifting devices are constructed in general as a vacuum tank. At the newer devices' type a will recognizable vacuum tank is used and it doesn't belong to the carrying parts. The tightness of the system is tested before delivery. Only devices which lose less than 5 % vacuum within 15 minutes will be delivered. This type of device is not manufactured by Pannkoke. This type of device is not manufactured by Pannkoke There shall be a device to warn automatically when the danger range is reached, if vacuum losses can not be compensated. The indication shall be optical and/or acoustic, depending upon the circumstances of use for the vacuum lifter, and in accordance with EN 981, EN 842 and EN 457; The warning device shall work even if there is a power supply failure to the vacuum lifter. NOTE: The warning device is not the pressure measuring device of or the indicator of Each vacuum lifting device with built-in electric vacuum generation has a control vacuum meter, an acoustical and an optical warning signal which indicates a too low partial vacuum and this since the beginning of the eighties. Rechargeable battery-operated vacuum lifting devices have been equipped since 2000 with two optical warning signals. Optionally we offer a large flash lamp as warning means and this is available for all electric operated devices with 2KS technology. Compressed air powered vacuum lifting devices have had a control vacuum meter and an acoustic warning signal since 2004 VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

18 Safety Requirements Requirements Solutions at Pannkoke In case of power failure, the vacuum lifter shall be able to hold the load for 5 minutes. This is not necessary in no-go areas and this is not necessary for turbine vacuum lifters if all the following conditions are met: the operator maintains control of the load through steering handles which ensures that the operator is outside the danger zone in case of the load falling; in addition to clause a warning device shall be activated as soon as the power fails; the manufacturer shall prohibit lifting of the geometric centre of the suction pads above 1.8 m by marking and instructions for use. Since 2000, we have only manufactured vacuum lifting devices with one or more closed vacuum circuits (see ). The tightness of the system is tested before delivery. Only devices which lose less than 5 % vacuum within 15 minutes will be delivered For vacuum lifters intended to be used in a building area a secondary positive holding device is required or there shall be two vacuum reserves each fitted with non-return valves. Each vacuum reserve shall be connected to a separate set of suction pads. Each set of suction pads shall fulfil the requirement of the clause The releasing of the load shall be actuated by a two action control. This is not necessary if the release of the load is not possible until the load has been put down or in no-go areas. All units in the 7201, 7211 or 7411 ranges have two independent vacuum circuits and are suitable for building site use. The conversion to point means that each vacuum circuit must be able to support the nominal load with 2-fold safety. This is only necessary for devices which are to be used on a building site. Each vacuum circuit requires the same monitoring functions as a device with only one vacuum circuit. When using a single circuit vacuum lifting device on a building site, an additional locking-fit support device must be used, which must be able to support the nominal load by itself at all times with the required degree of safety in every position. For example, this can be resolved by using brackets or a load strap up until the time of use. All of these measures fail only in an actual dangerous activity and the operator is then hard pressed to explain how the working of his safety measure conforms to the standard, when an accident has already occurred. For electrical lifting devices this is achieved by using a mushroom button (such as an emergencyoff switch). It has to be turned for changing. The mushroom-shaped key is in a housing with edge protection and with that the actuating element is protected by the surrounding mechanical protection. A protective shield is built around the hand valve(s) to prevent an unintentional actuation. Since 2004, compressed air powered devices have only been supplied with single-hand twofold actuation Controls for tilting or turning movements shall be hold- VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

19 Safety Requirements Requirements to-run type. Solutions at Pannkoke The shape of the suction pad shall be matched to that of the intended load(s). If more than one suction pad is used in conjunction with a lifting beam, the layout and working load limit of the suction pads shall be matched to that of the intended load(s). The share of the load which can foreseeable be imposed on each suction pad shall not exceed its working load limit taking account of the rigidity of both the load and the vacuum lifter. Under item 7 there are special requirements concerning user information. Under item vacuum lifting devices there are special requirements concerning the user information. A) Checking of the vacuum level; B) Measures to be taken as soon as the warnings are actuated; C) Checking of the condition of the vacuum connections and hoses; D) Checking of the condition of the suction pads. Also the minimum marking is clearly described under point This minimum marking has to be on a durable label: a) Identification of manufacturer (or authorized representative or importer); b) Type c) Serial number; d) Dead weight e) Year of construction f) Carrying capacity in kg g) CE-mark. VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

20 Safety Requirements Requirements which go beyond the safety draft of the CEN/TC 151/WG 13/SG A1. This working group has the following title: Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory Requirements The vacuum shall have redundancy so that if part of the systems fails then the remaining part of it shall be capable of supporting the actual load. Solutions at Pannkoke For our new devices with 2-circuit-vacuum-system (2KS) this is the case for electric as well as for compressed-air operated vacuum lifting devices Systems shall be provided to control and monitor vacuum losses comprising: a) In the case of vacuum lifters with a vacuum pump a reserve vacuum tank of minimum volume of at least twice the total evacuated volume of the system. b) In the case of vacuum lifters with injector venturi, every injector shall be equipped with a non return valve For raw glass either guarding on the rear of the frame with handles or guide handles alone shall be fitted and arranged in a way which protects the operator from falling glass. No guarding is required for small plates (maximum dimension less than 2M), provided the distance from the sucker cup edge of the glass is less than the distance the guide handles are from he glass It shall be possible to guide vacuum lifters using both hands, even if the operator has to simultaneously operate a hoist. The carrying frame or parts of the carrying frame of our vacuum lifting devices are constructed in general as a vacuum tank. At the newer devices' type a will recognizable vacuum tank is used and it doesn't belong to the carrying parts. The tightness of the system is tested before delivery. Only devices which lose less than 5 % vacuum within 15 minutes will be delivered. With the rechargeable battery operated vacuum lifting devices there is also the fact that if the vacuum falls below a certain limit during use, the vacuum will be increased via the accumulator vacuum pump. Behind the venturi jet (injector) is a non-return valve and then a vacuum tank. At 2KS System is for each vacuum circuit a vacuum tank with non-return valve available. Is available optionally on request for the corresponding glass size. Is available optionally on request for the corresponding glass size. VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

21 #TB_Fragebogen_GB.doc Questionnaire Vacuum Handling Technique

22 Visit our Internet-Page

23 Questionnaire: Vacuum Handling Technique Company (company stamp) Person in charge: Phone: Fax: With our vacuum equipment devices you can lift, hold and transport many different materials such as glass, synthetics, concrete, sheets, plastic coated and gastight chip board, stone etc. The surface can be planed and in some cases curved or beaded. It is also possible to work with materials up to 330 degrees Celsius. 1. Material to be lifted: 2. Condition of the surface gastight [ ] yes [ ] no Surface temperature: C damp [ ] yes [ ] no dusty [ ] yes [ ] no Surface plane [ ] yes [ ] no radius: [ ] smooth [ ] rough [ ] 3. Weight of the transport load: 4. Max. dimensions of the transport load (length x width x thickness): 5. Min. dimensions of the transport load (length x width x thickness): 6. How shall the transport load be moved? [ ] horizontal [ ] vertical [ ] horizontal and vertical 7. Which manipulating possibilites are preferred? [ ] tilting by 90 [ ] turning by 90 [ ] 8. How shall the manipulating movement be executed? [ ] manual [ ] electrical [ ] pneumatic [ ] 9. How is the transport load being stored? [ ] standing [ ] lying [ ] in a rack [ ] in a case [ ] VT_01_Fragebogen_für_Vakuumhebegeräte_GB.doc /2

24 Questionnaire: Vacuum Handling Technique 10. Where shall the transport load be transported? [ ] within the factory [ ] on the site [ ] open-air ground [ ] 11. Which load suspension device is available? [ ] craneway [ ] column crane [ ] mobile crane [ ] fork stacker [ ] 12. Which suspension will you prefer? [ ] steel cable sling [ ] suspension eye [ ] crane hook for kg 13. Which power supply is available and/or requested? [ ] current voltage: V frequency: Hz phases: [ ] Rechangeable battery-operation (possible to some extent) [ ] Compressed air bar 14. How shall the connection to the power supply be executed: hose winder, cable lap winder, length etc.? 15. How shall the vacuum be generated? [ ] built-in vacuum pump [ ] external vacuum pump [ ] venturi jet [ ] 16. How long must the vacuum be held? 17. Should the device be dismountable (for transport and/or storage)? [ ] no [ ] yes how? 18. Do you need a remote control? [ ] no [ ] yes ( ) at the guide handle of the device ( ) in the hand --- how long? m 19. Should the suction cups be individually lockable? [ ] no [ ] yes 20. Is the surface easily soiled? [ ] insensitive [ ] the suction cups may not leave marks (non-abrasive) VT_01_Fragebogen_für_Vakuumhebegeräte_GB.doc /2

25 7000-xx Carrying Frames without vacuum generation #TB_7000_GB.doc

26 Visit our Internet-Page

27 Possibilities of the Transport Movements Devices for Turning & Tilting vertical horizontal turning tilting vertical horizontal horizontal - vertical #TB_Drehen&Schwenken_GB.doc /1 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.de

28 Visit our Internet-Page

29 Frame 7000-ADS For operation on EC construction sites only permissible with mechanical holding device according to EN for lifting and transporting of narrow, long strips manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system control vacuum meter on the device single row arrangement of suction cups suction cups fixed directly on the carrying bar adjustable distance between the suction cups via movable carrying bars all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation external vacuum generation necessary e. g. via a Pannkoke Compound Pump 7002-COMP2 in the craneway Control Means SUCTION/RELEASE via hand valve at the device or via remote control of the vacuum generation Suspension: crane eye at the carrying frame Safe Working Load: 400 kg (1.5 m) / 340 kg (2.3 m) Colour: yellow 7000-ADS_GB.doc subject to changes 1/2

30 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 4 safe working load at carrying bar length 1500 mm on smooth and clean surface at 60 % vacuum kg 400 at carrying bar length 2300 mm on smooth and clean surface at 60 % vacuum kg 340 dead weight approx. kg vacuum infeed connection quick release coupling 9 mm Item No.: 7005-ADS Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup ADS_GB.doc subject to changes 2/2

31 7002-xx mains-operated, electric vacuum pump 7012-xx battery-supplied, electric vacuum pump #TB_7002&7012_GB.doc

32 Visit our Internet-Page

33 Standard Pump 7002-Standard Standard Pump for installation to machines, stacking devices etc. Description 1-circuit vacuum system the vacuum circuit has a 20 l vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Mean: ON/OFF SUCTION/RELEASE via hand valve at the device Installation vertically, horizontally or hanging possible Colour: yellow 7002-Standard_GB.DOC subject to changes 1/2

34 assembly dimension length approx. mm 650 width approx. mm 220 height approx. mm 510 dead weight approx. kg 35 vacuum infeed connection 9 mm outout approx. 7.0 m³/h voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7002-Standard special voltage on request 7002-Standard_GB.DOC subject to changes 2/2 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.de

35 Accu Vacuum Unit 7012-Handy the vacuum generation for versatile application for frames from small to mid-sized Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: approx. 27 kg Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Item-no HANDY voltage charger for battery 110 Volt 50/60 Hz 1 Ph Item-no HANDY HANDY_GB.DOC subject to changes 1/2

36 Accessories on request Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BK/DS infrared remote control SUCTION/RELEASE only outside the EC Connection Elements to the frame Hose Winder with 10 m hose 7003-T45A Hose Winder with hose in special length 7003-T45AS Hose Spiral approx. 5 m 7003-SP HANDY_GB.DOC subject to changes 2/2

37 Accu Vacuum Unit 7012-HANDY 2 the vacuum generation for versatile application for frames from small to mid-sized Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: approx. 27 kg Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Item-no HANDY voltage charger for battery 110 Volt 50/60 Hz 1 Ph Item-no HANDY HANDY2_GB.doc subject to changes 1/2

38 Accessories on request Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Connection Elements to the frame Hose Winder with 10 m hose 7003-T45A Hose Winder with hose in special length 7003-T45AS Hose Spiral approx. 5 m 7003-SP HANDY2_GB.doc subject to changes 2/2

39 Accu Vacuum Unit 7012-HANDY 3 the vacuum generation for versatile application for frames from small to mid-sized Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Best.-Nr HANDY3 voltage charger for battery 110 Volt 50/60 Hz 1 Ph Best.-Nr HANDY HANDY3_GB.DOC subject to changes 1/2

40 Accessories on request Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BK/DS infrared remote control SUCTION/RELEASE only outside the EC Connection Elements to the frame Hose Winder with 10 m hose 7003-T45A Hose Winder with hose in special length 7003-T45AS Hose Spiral approx. 5 m 7003-SP HANDY3_GB.DOC subject to changes 2/2

41 7202-xx mains-operated, electric vacuum pump 7212-xx battery-supplied, electric vacuum pump #TB_7202&7212_GB.doc

42 Visit our Internet-Page

43 Vacuum Unit 7202-HANDY2 2-circuit vacuum pump according to EN the vacuum generation for versatile application for frames from small to mid-sized Description 2-circuit vacuum system each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure interconnected operation possible up to 4 vacuum units Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Output: 3 m³/h Vacuum infeed connection: 9 mm Dead weight: approx. 27 kg Colour: yellow Voltage 400 Volt 50/60 Hz 3 Ph Item-no HANDY2-400 Voltage 230 Volt 50/60 Hz 1 Ph Item-no HANDY2-230 Voltage 110 Volt 50/60 Hz 1 Ph Item-no HANDY HANDY2_GB.doc subject to changes 1/2

44 Accessories on request Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-WL24 large warning lamp (flash light for collecting failures) 7202-HANDY2_GB.doc subject to changes 2/2

45 Accu Vacuum Unit 7212-HANDY2 2-circuit vacuum pump according to EN the vacuum generation for versatile application for frames from small to mid-sized Description 2-circuit vacuum system each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure interconnected operation possible up to 4 vacuum units Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: approx. 27 kg Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Item-no HANDY2 voltage charger for battery 110 Volt 50/60 Hz 1 Ph Item-no HANDY HANDY2_GB.doc subject to changes 1/2

46 Accessories on request Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: WL12 large warning lamp (flash light for collecting failures) 7212-HANDY2_GB.doc subject to changes 2/2

47 Accu Vacuum Unit 7212-HANDY 3 2-circuit vacuum pump according to EN the vacuum generation for versatile application for frames from small to mid-sized Description 2-circuit vacuum system each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure interconnected operation possible up to 4 vacuum units Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control or via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Best.-Nr HANDY3 voltage charger for battery 110 Volt 50/60 Hz 1 Ph Best.-Nr HANDY HANDY3_GB.doc subject to changes 1/2

48 Accessories on request Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: WL12 large warning lamp (flash light for collecting failures) 7212-HANDY3_GB.doc subject to changes 2/2

49 7001-xx Carrying Frames with mains-operated, electric vacuum pump #TB_7001_GB.doc

50 Visit our Internet-Page

51 Possibilities of the Transport Movements Devices for Turning & Tilting vertical horizontal turning tilting vertical horizontal horizontal - vertical #TB_Drehen&Schwenken_GB.doc /1 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.de

52 Visit our Internet-Page

53 Kombi 7001-ADS SO01 For operation on EC construction sites only permissible with mechanical holding device according to EN for vertical lifting and transporting manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system single row arrangement of suction cups suction cups fixed with movable suspension directly on the frame distance of suction cups can be adjusted all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 detachable extension available Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device or via cable remote control Suspension: Safe Working Load: Colour: crane eye at the carrying frame 300 kg yellow / partly zinked 7001-ADS_SO01_GB.doc subject to changes 1/2

54 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg frame size approx. mm 1300 x 1000 output 3.8 m³/h voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-ADS-SO voltage 110 Volt 50 Hz Item No.: 7001-ADS-SO voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-ADS-SO other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Also available as 2-circuit vacuum lifting device (Type 7201-ADS SO01) in accordance to EN / pren ADS_SO01_GB.doc subject to changes 2/2

55 Kombi 7001-DS For operation on EC construction sites only permissible with mechanical holding device according to EN for planar stabilized, vertical lifting and transporting manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups suction cups fixed with movable suspension directly on the frame distance of suction cups can be adjusted all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 detachable extension available Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device or via cable remote control Suspension: Safe Working Load: Colour: crane eye at the carrying frame 600 kg yellow / partly zinked 7001-DS_GB.doc subject to changes 1/2

56 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 6 4 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg frame size approx. mm 1300 x 1000 distance of suction cups min. approx. mm max. approx. mm structural depth approx. mm 290 output 3.8 m³/h voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-DS voltage 110 Volt 50 Hz Item No.: 7001-DS voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-DS other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-VLDS set extensions (left / right) Item No.: 7003-GTW2 suspension gear transport carriage Also available as 2-circuit vacuum lifting device (Type 7201-DS) in accordance to EN / pren DS_GB.doc subject to changes 2/2

57 7011-xx Carrying Frame with battery-supplied, electric vacuum pump #TB_7011_GB.doc

58 Visit our Internet-Page

59 Possibilities of the Transport Movements Devices for Turning & Tilting vertical horizontal turning tilting vertical horizontal horizontal - vertical #TB_Drehen&Schwenken_GB.doc /1 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.de

60 Visit our Internet-Page

61 Accu-Device Kombi 7011-ADS For operation on EC construction sites only permissible with mechanical holding device according to EN for lifting and transporting of narrow, long strips manual turning through ±90 degrees manual tilting through 90 degrees perfect for glazing of conservatories vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum single row arrangement of suction cups suction cups fixed directly on the carrying bar adjustable distance between the suction cups via movable carrying bars all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 400 kg (1.5 m) / 340 kg (2.3 m) Colour: yellow / partly zinked 7011-ADS_GB.doc subject to changes 1/2

62 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 4 safe working load at carrying bar length 1500 mm on smooth and clean surface at 60 % vacuum kg 400 at carrying bar length 2300 mm on smooth and clean surface at 60 % vacuum kg 340 dead weight approx. kg 67 structural depth approx. mm 250 vacuum infeed connection 9 mm output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7011-ADS voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7011-ADS Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BF/DS infrared remote control SUCTION/RELEASE only outside the EC Also available as 2-circuit vacuum lifting device (Type 7211-ADS) in accordance to EN / pren ADS_GB.doc subject to changes 2/2

63 Accu-Device Kombi 7011-ADS SO02 For operation on EC construction sites only permissible with mechanical holding device according to EN for lifting and transporting of narrow, long strips manual turning through ±90 degrees manual tilting through 90 degrees perfect for glazing of conservatories vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum single row arrangement of suction cups suction cups fixed directly on the carrying bar adjustable distance between the suction cups via movable carrying bars all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 400 kg Colour: yellow / partly zinked 7011-ADS_SO02_GB.doc subject to changes 1/2

64 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups rubber black abrasion possible up to 100 heat resistance number of suction cups 6 safe working load on smooth and clean surface at 60 % vacuum kg 400 dead weight approx. kg vacuum infeed connection 9 mm output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7011-ADS SO voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7011-ADS SO Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BF/DS infrared remote control SUCTION/RELEASE only outside the EC Also available as 2-circuit vacuum lifting device (Type 7211-ADS SO02) in accordance to EN / pren ADS_SO02_GB.doc subject to changes 2/2

65 Accu-Device Kombi 7011-DS For operation on EC construction sites only permissible with mechanical holding device according to EN for planar stabilized, vertical lifting and transporting manual turning through ±90 degrees manual tilting through 90 degrees the perfect equipment for warehouse and construction site vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups suction cups fixed with movable suspension directly on the frame distance of suction cups can be adjusted all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 detachable extension available Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 600 kg Colour: yellow / partly zinked 7011-DS_GB.doc subject to changes 1/2

66 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 6 4 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg frame size approx. mm 1300 x 1000 distance of suction cups min. approx. mm max. approx. mm structural depth approx. mm 290 output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7011-DS voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7011-DS other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BF/DS infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-VLDS set extensions (left / right) Item No.: 7003-GTW2 suspension gear transport carriage Also available as 2-circuit vacuum lifting device (Type 7211-DS) in accordance to EN / pren DS_GB.doc subject to changes 2/2

67 DS Range Special design of accu-device Kombi 7011-DS Accu-Device Kombi 7011-DS with suction cups 543 Accu-Device Kombi 7011-DS with suction cups Familie_DS_02_GB.doc subject to changes 1/1

68 DS Range Special design of accu-device Kombi 7011-DS Accu-Device Kombi 7011-DS SO01 with adjustable suspension eye and holding device for a counterweight Accu-Device Kombi 7011-DS SO02 with short suspension frame Familie_DS_03_GB.doc subject to changes 1/1

69 DS Range Special design of accu-device Kombi 7011-DS Accu-Device Kombi 7011-DS SO03 with support suction cups for one corner Accu-Device Kombi 7011-DS SO04 with smaller suction frame Familie_DS_04_GB.doc subject to changes 1/1

70 Visit our Internet-Page

71 Transport Carriage 7003-GTW2 for Kombi 7011-DS / 7211-DS DS_7003-GTW2_GB.doc /2

72 Transport Carriage 7003-GTW2 for Kombi 7011-DS / 7211-DS DS_7003-GTW2_GB.doc subject to changes 2/2

73 Accessories for DS-family 7003-ADS Reversion Kit Exchange Carrying Frame 4 suction cups 388 extractable carrying bar length from approx. 1.5 m to approx. 2.3 m maximum load-carrying capacity 400 kg (pushed together) and/or 340 kg (pulled apart) colour yellow ZBH_Familie_DS_GB.doc subject to changes 1/5

74 Accessories for DS-family 7003-DS Reversion Kit Exchange Carrying Frame 6 suction cups 388 all suction cups lockable individually frame size approx x 1000 / 660 mm maximum carrying capacity 600 kg colour yellow 7003-DSG Reversion Kit Exchange Carrying Frame convex or concave curved panes minimum radius 750 mm 14 suction cups 540 carrying bar length approx m maximum carrying capacity 400 kg colour yellow ZBH_Familie_DS_GB.doc subject to changes 2/5

75 Accessories for DS-family 7003-IR2S Infrared Remote Control for suction/release 7003-BF/DS Infrared Remote Control for suction/release only outside the EC ZBH_Familie_DS_GB.doc subject to changes 3/5

76 Accessories for DS-family 7003-BK/DS Cable Remote Control for suction/release 388-Schutz protecting cap or suction cup Schutz protecting cap or suction cup 540 ZBH_Familie_DS_GB.doc subject to changes 4/5

77 Accessories for DS-family 7003-VLDS extension arms for more stabilization of large loaded goods each with suction cup 388 each approx. 750 mm long (only for 7011-DS) 7003-GTW2 transport carriage (only for 7011-DS) ZBH_Familie_DS_GB.doc subject to changes 5/5

78 Visit our Internet-Page

79 Accu-Device Kombi 7011-DS SO08 For operation on EC construction sites only permissible with mechanical holding device according to EN for planar stabilized, vertical lifting and transporting manual turning through ±90 degrees manual tilting through 90 degrees the perfect equipment for warehouse and construction site vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups suction cups fixed with movable suspension directly on the frame distance of suction cups can be adjusted all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 detachable extension available Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 250 kg Colour: yellow / partly zinked 7011-DS_SO08_GB.doc subject to changes 1/2

80 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type Suction cup surface 380 x 80 in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 9 safe working load on smooth and clean surface at 60 % vacuum kg 250 dead weight approx. kg frame size approx. mm structural depth approx. mm output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7011-DS_SO voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7011-DS_SO other frame sizes on request Accessories on request Item No.: SCH protection cap for suction cup Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BF/DS infrared remote control SUCTION/RELEASE only outside the EC 7011-DS_SO08_GB.doc subject to changes 2/2

81 Accu-Device Kombi 7011-DS3 For operation on EC construction sites only permissible with mechanical holding device according to EN for planar stabilized, vertical lifting and transporting manual turning through ±360 degrees manual or hydraulic tilting through 90 degrees vertical horizontal turning through +/- 360 degrees tilting through 90 degrees Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups all suction cups lockable individually extendable at maximum by 6 extensions maximum structural depth 230 mm ball beared turning device and lock locking at tilt device (0 to 90 ) with lock every 3 or infinitely through hydraulic cylinder tilt device at any time changeable within a few minutes Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control or via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 1000 kg Colour: yellow / partly zinked 7011-DS3_GB.doc subject to changes 1/2

82 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups rubber black - abrasion possible - up to 100 C heat resistance number of suction cups number of extension pieces: safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg 135 frame size approx. mm 2550 x x x x 630 structural depth approx. mm 230 output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7011-DS3man... with manual tilt device voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7011-DS3man... with manual tilt device voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7011-DS3hyd... with hydraulic tilt cylinder voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7011-DS3hyd... with hydraulic tilt cylinder Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-SVhyd hydraulic tilt device Item No.: 7003-SVman manual tilt device Item No.: 7003-DSKAST cable remote control SUCTION/RELEASE Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-GTGDS3 transport carriage for Kombi 7011-DS3 / 7211-DS3 Item No.: 7003-WSP rain cover for transport carriage 7003-GTGDS DS3_GB.doc subject to changes 2/2

83 Kombi 7211-DS3 Kombi 7011-DS3 Transport-Installation-Lift 7211-TML TML 7211-DS3_Pos_GB.doc /2

84 subject to changes 2/2

85 Transport Carriage 7003-GTGDS3 for Kombi 7011-DS3 / 7211-DS3 Transport Carriage 7003-GTGDS3 with Kombi 7211-DS3 and 6 extensions (back view) Transport Carriage 7003-GTGDS3 with Kombi 7211-DS3 and 6 extensions (front view) 7211-DS3_7003-GTGDS3_GB.doc /2

86 Transport Carriage 7003-GTGDS3 for Kombi 7011-DS3 / 7211-DS3 Kombi 7211-DS3 mounted on Transport Carriage 7003-GTGDS3 (side view) Transport Carriage 7003-GTGDS3 with 6 extensions (front view) 7211-DS3_7003-GTGDS3_GB.doc /2

87 Accu-Device Kombi 7011-DSG For operation on EC construction sites only permissible with mechanical holding device according to EN for planar stabilized, vertical lifting and transporting of convex and concave curved materials manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups suction cups fixed directly on the carrying bar carrying bars are turnable on bearings for minimum radius of 750 mm all suction cups lockable individually replaceable suspension bar in several lengthes available turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 400 kg Colour: yellow / partly zinked 7011-DSG_GB.doc subject to changes 1/2

88 suitable for lifting material properties surface gas-tight smooth convex and concave curved radius minimum 750 mm e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 540 diameter in action approx. mm 200 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups safe working load on smooth and clean surface at 60 % vacuum kg number of longitudinal carrying bars 2 length of the cross carrying bars approx. mm dead weight approx. kg output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7011-DSG voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7011-DSG other frame sizes on request Accessories on request Item No.: 540-SCHUTZ protection cap for suction cup 540 Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BF/DS infrared remote control SUCTION/RELEASE only outside the EC Also available as 2-circuit vacuum lifting device (Type 7211-DSG) in accordance to EN / pren DSG_GB.doc subject to changes 2/2

89 7211-xx Carrying Frame with battery-supplied, electric vacuum pump #TB_7211_GB.doc

90 Visit our Internet-Page

91 Possibilities of the Transport Movements Devices for Turning & Tilting vertical horizontal turning tilting vertical horizontal horizontal - vertical #TB_Drehen&Schwenken_GB.doc /1 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.de

92 Visit our Internet-Page

93 Accu-Device Kombi 7211-ADS Umb Retrofittung for operation on construction sites within the EC according to EN for lifting and transporting of narrow, long strips manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees after retrofitting corresponds the device the following description increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups fixed suction cup spacing all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 400 kg Colour: yellow / partly zinked 7211-ADS_Umb_GB.doc subject to changes 1/2

94 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 2 x 8 2 x 3 safe working load on smooth and clean surface at 60 % vacuum at EC construction sites kg in-plant kg dead weight approx. kg output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-ADS_Umb voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7211-ADS_Umb other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BK/2K cable remote control SUCTION/RELEASE Item No.: 7003-IR2S/2K infrared remote control SUCTION/RELEASE Item No.: 7003-BF/2K infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-GTW2 suspension gear transport carriage 7211-ADS_Umb_GB.doc subject to changes 2/2

95 Accu-Device Kombi 7211-DS Umb Retrofittung for operation on construction sites within the EC according to EN for planar stabilized, vertical lifting and transporting manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees after retrofitting corresponds the device the following description increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups adjustable distance between the suction cups (up to 6 suction cups) not adjustable distance between the suction cups (at more than 6 suction cups) all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 600 kg (in-plant) 400 kg (at EC construction site) Colour: yellow / partly zinked 7211-DS_Umb_GB.doc subject to changes 1/2

96 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 2 x4 2 x 3 safe working load on smooth and clean surface at 60 % vacuum at EC construction sites kg 400 in-plant kg 600 dead weight approx. kg frame size approx. mm 1000 x 1300 structural depth approx. mm output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-DS_Umb voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7211-DS_Umb other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BK/2K cable remote control SUCTION/RELEASE Item No.: 7003-IR2S/2K infrared remote control SUCTION/RELEASE Item No.: 7003-BF/2K infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-GTW2 suspension gear transport carriage 7211-DS_Umb_GB.doc subject to changes 2/2

97 Accu-Device Kombi 7211-ADS Developed for operation on the construction site within the EC according to EN for lifting and transporting of narrow, long strips manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system single row arrangement of suction cups fixed suction cup spacing all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 240 / 350 kg Colour: yellow / partly zinked 7211-ADS_GB.doc subject to changes 1/2

98 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements, plastic and ceramic plates, coated boards suction cup type 540 diameter in action approx. mm 200 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 2 x 6 safe working load on smooth and clean surface at 60 % vacuum at EC construction sites kg 240 in-plant kg 350 dead weight approx. kg output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-ADS voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7211-ADS other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BK/2K cable remote control SUCTION/RELEASE Item No.: 7003-IR2S/2K infrared remote control SUCTION/RELEASE Item No.: 7003-BF/2K infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-WL large warning lamp (flash light for collecting failures) 7211-ADS_GB.doc subject to changes 2/2

99 Accu-Device Kombi 7211-DS4 Developed for operation on the construction site within the EC according to EN for planar stabilized, vertical lifting and transporting manual turning through ±360 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 360 degrees tilting through 90 degrees Description increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to the standards EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure acoustic signal indicates insufficient vacuum power failure monitoring system multiple row arrangement of suction cups extendable at maximum by 6 extensions maximum structural depth 230 mm ball beared turning device and lock locking at tilting device (0 to 90 ) guide bow holder for crane switch Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) separately battery charger for charging over night no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device Suspension: crane eye at the carrying frame Safe Working Load: 600 kg Colour: yellow / partly zinked 7211-DS4_GB.doc subject to changes 1/2

100 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups rubber black - abrasion possible - up to 100 C heat resistance number of suction cups 2 x 6 2 x 5 2 x 4 2 x 3 number of extension pieces: safe working load on smooth and clean surface at 60 % vacuum at EC construction sites kg in-plant kg dead weight approx. kg frame size approx. mm 2270 x x x x 860 structural depth approx. mm 230 output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-DS voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7211-DS Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-GTGDS4 transport carriage for Kombi 7011-DS4 / 7211-DS4 Item No.: 7003-WSP4 rain cover for transport carriage 7003-GTGDS DS4_GB.doc subject to changes 2/2

101 Kombi 7211-DS DS4_Pos_GB.doc /2

102 7211-DS4_Pos_GB.doc subject to changes 2/2

103 Accu-Device Kombi 7211-DS2 Developed for operation on the construction site within the EC according to EN for planar stabilized, vertical lifting and transporting manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups fixed distance between the suction cups (at more than 6 suction cups) adjustable distance between suction cups (up to 6 suction cups) all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 600 kg Colour: yellow / partly zinked 7211-DS2_GB.doc subject to changes 1/2

104 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements, plastic and ceramic plates, coated boards suction cup type 388 Diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 2 x 6 2 x 4 2 x 3 safe working load on smooth and clean surface at 60 % vacuum at EC construction sites kg in-plant kg dead weight approx. kg frame size approx. mm structural depth approx. mm output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-DS voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7211-DS other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BK/2K cable remote control SUCTION/RELEASE Item No.: 7003-IR2S/2K infrared remote control SUCTION/RELEASE Item No.: 7003-BF/2K infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-GTW2 suspension gear transport carriage Item No.: 7003-WL large warning lamp (flash light for collecting failures) 7211-DS2_GB.doc subject to changes 2/2

105 -0,6-0,4-0,8-0,2-1,0 0 bar Pannkoke Lösen -0,6 Lösen -0,4-0,2 0-0,4-0,6-0,2-0,8 0-1,0 bar Pannkoke -0,4-0,6-0,2-0,8 0-1,0 bar Pannkoke Kombi 7211-DS2 255 A B B -0,8-1,0 bar Pannkoke min. 620 max B A A B B A A A B A B DS2_Pos_GB.doc /2

106 Kombi 7211-DS ,6-0,4-0,8-0,2 0 0 bar Pannkoke A -0,8-1,0 bar Pannkoke A B A B 1000 Lösen 1000 B B -0,4-0,6-0,2-1,0 A A B B A ,6-0,4-0,8-0,4-0,6-0,2-1,0-0,2 0 0 bar Pannkoke -0,8-1,0 bar Pannkoke B A B B A A Lösen A B B A Lö se n B A DS2_Pos_GB.doc Address: Haendelweg 5 D Luebeck subject to changes Germany Phone: Fax: /2 Internet: info@pannkoke.de

107 Transport Carriage 7003-GTW2 for Kombi 7011-DS / 7211-DS DS_7003-GTW2_GB.doc /2

108 Transport Carriage 7003-GTW2 for Kombi 7011-DS / 7211-DS DS_7003-GTW2_GB.doc subject to changes 2/2

109 Accu-Device Kombi 7211-DSG2 Developed for operation on the construction site within the EC according to EN for planar stabilized, vertical lifting and transporting of convex and concave curved materials manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups suction cups fixed directly on the carrying bar carrying bars are turnable on bearings for minimum radius of 750 mm all suction cups lockable individually replaceable suspension bar in several lengthes available turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 400 kg Colour: yellow / partly zinked 7211-DSG2_GB.doc subject to changes 1/2

110 suitable for lifting material properties surface gas-tight smooth convex and concave curved radius minimum 750 mm e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 540 diameter in action approx. mm 200 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 2 x 8 2 x 12 safe working load on smooth and clean surface at 60 % vacuum kg number of longitudinal carrying bars 2 length of the cross carrying bars approx. mm dead weight approx. kg output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-DSG voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7211-DSG other frame sizes on request Accessories on request Item No.: 540-SCHUTZ protection cap for suction cup 540 Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BF/DS infrared remote control SUCTION/RELEASE only outside the EC 7211-DSG2_GB.doc subject to changes 2/2

111 Accu-Device Kombi 7211-DS3 Developed for operation on the construction site within the EC according to EN for planar stabilized, vertical lifting and transporting manual turning through ±360 degrees manual or hydraulic tilting through 90 degrees vertical horizontal turning through +/- 360 degrees tilting through 90 degrees Description increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to the standards EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups all suction cups lockable individually extendable at maximum by 6 extensions maximum structural depth 230 mm ball beared turning device and lock locking at tilt device (0 to 90 ) with lock every 3 or infinitely through hydraulic cylinder tilt device at any time changeable within a few minutes Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control or via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 1000 kg Colour: yellow / partly zinked 7211-DS3_GB.doc subject to changes 1/2

112 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups rubber black - abrasion possible - up to 100 C heat resistance number of suction cups number of extension pieces: safe working load on smooth and clean surface at 60 % vacuum at EC construction sites kg in-plant kg dead weight approx. kg 135 frame size approx. mm 2550 x x x x x x 630 structural depth approx. mm 230 output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-DS3man... with manual tilt device voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7211-DS3man... with manual tilt device voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-DS3hyd... with hydraulic tilt cylinder voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7211-DS3hyd... with hydraulic tilt cylinder Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-SVhyd hydraulic tilt device Item No.: 7003-SVman manual tilt device Item No.: 7003-DSKAST cable remote control SUCTION/RELEASE Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-GTGDS3 transport carriage for Kombi 7011-DS3 / 7211-DS3 Item No.: 7003-WSP rain cover for transport carriage 7003-GTGDS3 Item No.: 7003-WL large warning lamp (flash light for collecting failures) DS3_GB.doc subject to changes 2/2

113 Kombi 7211-DS3 Kombi 7011-DS3 Transport-Installation-Lift 7211-TML TML 7211-DS3_Pos_GB.doc /2

114 subject to changes 2/2

115 Transport Carriage 7003-GTGDS3 for Kombi 7011-DS3 / 7211-DS3 Transport Carriage 7003-GTGDS3 with Kombi 7211-DS3 and 6 extensions (back view) Transport Carriage 7003-GTGDS3 with Kombi 7211-DS3 and 6 extensions (front view) 7211-DS3_7003-GTGDS3_GB.doc /2

116 Transport Carriage 7003-GTGDS3 for Kombi 7011-DS3 / 7211-DS3 Kombi 7211-DS3 mounted on Transport Carriage 7003-GTGDS3 (side view) Transport Carriage 7003-GTGDS3 with 6 extensions (front view) 7211-DS3_7003-GTGDS3_GB.doc /2

117 Accu-Device Kombi 7211-DSG3 Developed for operation on the construction site within the EC according to EN for planar stabilized, vertical lifting and transporting of convex and concave curved materials manual turning through ±360 degrees manual or hydraulic tilting through 90 degrees vertical horizontal turning through +/- 360 degrees tilting through 90 degrees Description increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to the standards EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups distance of suction cups can be adjusted carrying bars are turnable on bearings for minimum radius of 2000 mm ball beared turning device and lock locking at tilt device (0 to 90 ) with lock every 3 or infinitely through hydraulic cylinder tilt device at any time changeable within a few minutes Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control or via infrared remote control Suspension: crane eye at the carrying frame Safe Working Load: 400 kg Colour: yellow / partly zinked 7211-DSG3_GB.doc subject to changes 1/2

118 suitable for lifting material properties gas-tight surface smooth - convex or concave bending - radius minimum 2000 mm e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 540 diameter in action approx. mm 200 quality of suction cups rubber black - abrasion possible - up to 100 C heat resistance number of suction cups 2 x 11 safe working load on smooth and clean surface at 60 % vacuum at EC construction sites kg 400 in-plant kg 600 dead weight approx. kg 135 frame size approx. mm 2300 x 1280 structural depth approx. mm output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-DSG3man with manual tilt device voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7211-DSG3hyd with hydraulic tilt cylinder Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-SVhyd hydraulic tilt device Item No.: 7003-SVman manual tilt device Item No.: 7003-DSKAST cable remote control SUCTION/RELEASE Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-WL large warning lamp (flash light for collecting failures) 7211-DSG3_GB.doc subject to changes 2/2

119 7005-xx Carrying Frames with compressed air-operated vacuum pump / venturi jet(s) #TB_7005_GB.doc

120 Visit our Internet-Page

121 Possibilities of the Transport Movements Devices for Turning & Tilting vertical horizontal turning tilting vertical horizontal horizontal - vertical #TB_Drehen&Schwenken_GB.doc /1 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.de

122 Visit our Internet-Page

123 Venturi Device 7005-ADS 1-Circuit Vacuum Lifting Device for the use outside the EC for lifting and transporting of narrow, long strips manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve control vacuum meter on the device single row arrangement of suction cups suction cups fixed directly on the carrying bar adjustable distance between the suction cups via movable carrying bars all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary Control Means air pressure ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device Suspension: crane eye at the carrying frame Safe Working Load: 400 kg (1.5 m) / 340 kg (2.3 m) Colour: yellow / partly zinked 7005-ADS_GB.doc subject to changes 1/2

124 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 4 safe working load at carrying bar length 1500 mm on smooth and clean surface at 60 % vacuum kg 400 at carrying bar length 2300 mm on smooth and clean surface at 60 % vacuum kg 340 dead weight approx. kg air pressure connection quick release coupling 9 mm Item No.: 7005-ADS Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Also available as 2-circuit vacuum lifting device (Type 7205-ADS) in accordance to EN / pren Also available with a power failure monitoring system for the use within the EC ADS_GB.doc subject to changes 2/2

125 Venturi Device 7005-ADS/E 1-circuit vacuum lifting device according to EN for lifting and transporting of narrow, long strips manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve power failure monitoring system control vacuum meter on the device single row arrangement of suction cups suction cups fixed directly on the carrying bar adjustable distance between the suction cups via movable carrying bars all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 RELEASE-function with overpressure for short cycle intervals Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary Control Means air pressure ON/OFF directly at the device SUCTION via a touch valve RELEASE via two touch valves Suspension: crane eye at the carrying frame Safe Working Load: 400 kg (1.5 m) / 340 kg (2.3 m) Colour: yellow / partly zinked 7005-ADSE_GB.doc subject to changes 1/2

126 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 4 safe working load at carrying bar length 1500 mm on smooth and clean surface at 60 % vacuum kg 400 at carrying bar length 2300 mm on smooth and clean surface at 60 % vacuum kg 340 dead weight approx. kg air pressure connection quick release coupling 9 mm Item No.: 7005-ADS/E Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Also available as 2-circuit vacuum lifting device (Type 7205-ADS) in accordance to EN / pren ADSE_GB.doc subject to changes 2/2

127 Venturi Device 7005-DS 1-Circuit Vacuum Lifting Device for the use outside the EC for planar stabilized, vertical lifting and transporting manual turning through ±90 degrees manual tilting through 90 degrees vertical horizontal turning through +/- 90 degrees tilting through 90 degrees Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve control vacuum meter on the device multiple row arrangement of suction cups suction cups fixed with movable suspension directly on the frame distance of suction cups can be adjusted all suction cups lockable individually turning device (-90 /0 /+90 ) with ball bearing turning bolt and locking device tilting device (0 to 90 ) with locking device every 15 detachable extension available Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary Control Means air pressure ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device Suspension: Safe Working Load: Colour: crane eye at the carrying frame 600 kg yellow / partly zinked 7005-DS_GB.doc subject to changes 1/2

128 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 6 4 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg frame size approx. mm 1300 x 1000 air pressure connection quick release coupling 9 mm Item No.: 7005-DS Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Also available as 2-circuit vacuum lifting device (Type 7205-DS) in accordance to EN / pren Also available with a power failure monitoring system for the use within the EC DS_GB.doc subject to changes 2/2

129 #TB_Verglasungsgeräte_GB.doc Glazing Device

130 Visit our Internet-Page

131 Transport- Installation-Lift 7211-TML Developed for operation on the construction site within the EC according to EN vertical turning through +/- 360 degrees tilting through maximum 90 degrees installation lift with vacuum lifting device for planar stabilized, vertical lifting and transporting manual turning through ±360 degrees manual tilting through +20 / -50 degrees Description easily moveable Transport-Installation-Lift for transport of plates on solid ground height and inclination adjustable lifting up motion via hand hydraulic pump safety value for let down motion increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to the standards EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups extendable at maximum by 6 extensions ball beared turning device and lock locking at tilting device (+20 to -50 ) with locking device every 3 Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control or via infrared remote control Safe Working Load: 300 / 500 kg Colour: red / yellow / partly zinked 7211-TML_GB.doc subject to changes 1/2

132 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups rubber black - abrasion possible - up to 100 C heat resistance number of suction cups number of extension pieces: safe working load on smooth and clean surface at 60 % vacuum at EC construction sites kg 300 / / / in-plant kg 300 / / / / / 400 dead weight approx. kg 340 suction frame size approx. mm 2550 x 2550 x 1360 x x x maximum lifting height approx. mm 2000 dimensions of device length: 1300 / width: height: 1560 transport width with large plate approx. mm 1020 voltage charger for battery 230 Volt (or 110 Volt) 50/60 Hz 1Ph Item No.: 7211-TML-300- maximum carrying capacity 300 kg Item No.: 7211-TML-500- maximum carrying capacity 500 kg 10-VL6 10-VL4 08-VL0 06-VL0 04-VL0 Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-DSKAST cable remote control SUCTION/RELEASE Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-WL large warning lamp (flash light for collecting failures) 7211-TML_GB.doc subject to changes 2/2

133 Transport-Installation-Lift 7211-TML unloading from a glass rack with 5 inclination low height of front rollers turning of a plate 3 x 2m turning of a plate 3 x 2m 7211-TML_Fotos_01_GB.doc /2

134 Transport-Installation-Lift 7211-TML 2000 mm the maximum inclination depends on the height of stroke and the size of the transport load maximum lifting height approx mm adjustable inclination of pillar and suction frame 1020 mm transport position width approx mm 7211-TML_Fotos_01_GB.doc /2

135 Transport-Installation-Lift 7211-TML possible when using an adequate counter weight transport position width approx mm 2000 mm maximum lifting height approx mm possible when using an adequate counter weight 7211-TML_Fotos_02_GB.doc /2

136 Transport-Installation-Lift 7211-TML possible when using an adequate counter weight unloading from a glass rack 7211-TML_Fotos_02_GB.doc /2

137 Transport-Installation-Lift 7211-TML 7211-TML_Pos_GB.doc /2

138 Transport-Installation-Lift 7211-TML 7211-TML_Pos_GB.doc subject to changes 2/2

139 Kombi 7211-DS3 Kombi 7011-DS3 Transport-Installation-Lift 7211-TML TML 7211-DS3_Pos_GB.doc /2

140 subject to changes 2/2

141 Glazing Unit Elefant For operation on EC construction sites only permissible with mechanical holding device according to Assembling Crane with built-in vacuum pump for rechargeable battery operation vacuum frame stepless adjustable in the inclination and manual turnable through 300 degrees Description Crane via 2 rack and 2 guide rolls movable manually hydraulically adjustable in the height dismountable for transport Vacuum Frame stepless adjustable in the inclination via hand spindle turning device and locking suction cups fixed directly on the frame maximum loading capacity: 600 kg vertical turning through max. 300 degrees Accumulator Pump 7012-HANDY is detachable 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control ELEFANT_GB.doc subject to changes 1/2

142 vacuum frame and assembling crane suitable for lifting material properties gas-tight surface smooth e. g. glass, plastic boards, ceramic plates, sheets metal, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 6 safe working load on smooth and clean surface at 60 % vacuum kg 600 outer distance from cup to cup approx. mm 750 x 750 working height centre vacuum frame minimum approx. mm maximum approx. mm total width approx. mm 1280 total length approx. mm 1820 Also available as 2-circuit vacuum lifting device (Type Elefant 2KS) in accordance to EN / pren Accumulator Pump 7012-HANDY vacuum infeed connection 9 mm output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph with 7012-Handy voltage charger for battery 110 Volt 50/60 Hz 1Ph with 7012-Handy-110 ELEFANT_GB.doc subject to changes 2/2

143 Glazing Unit Giraffe For operation on EC construction sites only permissible with mechanical holding device according to mounting lift with vacuum lifting device for roof glazing stepless adjustable in the inclination from minus 6 to plus 94 degrees manual turning through ±100 degrees possible Description Mounting Lift movable manually via guide rolls adjustable in the height, available either manually or electrically dismountable for transport mounting lift can also be used without carrying frame vertical Carrying Frame stepless adjustable in the inclination via hand hydraulic pump with safety valve turning device with clamping device turning through +/- 100 degrees tilting through max. 90 degrees carrying frame ±60 degrees tiltable around the beam suction cups are fixed directly on the extentable carrying bars vacuum infeed via hose winder the carrying frame can be removed easily for the transport Safe Working Load: 200 kg combinable with Accumulator Pump 7012-HANDY Giraffe_GB.doc subject to changes 1/2

144 vacuum frame and mounting lift suitable for lifting material properties gas-tight surface smooth e. g. glass, plastic boards, ceramic plates, sheets metal, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 3 safe working load on smooth and clean surface at 60 % vacuum kg 200 outer distance from cup to cup minimum approx. mm 1000 maximum approx. mm 2300 working height centre vacuum frame minimum approx. mm maximum approx. mm needed working area width approx. mm 2000 depth 2200 approx. mm total height (retracted) approx. mm 2040 total width for the transport approx. mm 1000 total height for the transport approx. mm 2200 dead weight approx. kg 260 weight of the carrying frame approx. kg 70 weight of the mounting lift approx. kg 190 Giraffe_GB.doc subject to changes 2/2

145 Accu-Device Kombi 7011-F1200SO for Crane Manipulator For operation on EC construction sites only permissible with mechanical holding device according to EN add-on unit for crane manipulator for planar stabilized, vertical lifting and transporting turning and tilt motions hydraulic controllable via the manipulator detailed description on request design according to your requirement vertical horizontal Turning Tilting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups suction cups fixed with movable suspension directly on the frame distance of suction cups can be adjusted all suction cups lockable individually distance of suction cups can be adjusted modular device construction Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Safe Working Load: 1200 kg Colour: yellow / partly zinked 7011-F1200SO_GB.doc subject to changes 1/2

146 Also available as 2-circuit vacuum lifting device (Type 7211-F1200SO) in accordance to EN / pren F1200SO_GB.doc subject to changes 2/2

147 Accu-Device Balance For operation on EC construction sites only permissible with mechanical holding device according to EN for planar stabilized, vertical glazing also under overhanging roofs angle of inclination adjustable via movable counter weight with built-on moving gear for rechargeable battery operation Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups suction cups fixed with movable suspension directly on the frame distance of suction cups can be adjusted modular device construction Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control vertical Suspension: Safe Working Load: Colour: crane string 1200 kg yellow / partly zinked Balance_GB.doc subject to changes 1/2

148 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups safe working load on smooth and clean surface at 60 % vacuum kg frame size approx. kg dead weight approx. kg output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: Balance voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: Balance other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BF/DS infrared remote control SUCTION/RELEASE Also available as 2-circuit vacuum lifting device (Type Balance 2KS) in accordance to EN / pren Balance_GB.doc subject to changes 2/2

149 Accu-Device Balance 2KS Developed for operation on the construction site within the EC according to EN for planar stabilized, vertical glazing also under overhanging roofs angle of inclination adjustable via movable counter weight with built-on moving gear for rechargeable battery operation Description increased safety via 2 independent vacuum circuits each vacuum circuit is designed with 2-fold safety acording to EN & pren & pren each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups suction cups fixed with movable suspension directly on the frame distance of suction cups can be adjusted all suction cups lockable individually modular device construction vertical Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Suspension: Safe Working Load: Colour: crane string 1200 kg yellow / partly zinked Balance_2KS_GB.doc subject to changes 1/2

150 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, sealed units, window and curtain walling elements suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 2 x 4 2 x 8 2 x 12 safe working load on smooth and clean surface at 60 % vacuum kg frame size approx. kg dead weight approx. kg output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: Balance 2KS voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: Balance 2KS other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 7003-BF/DS infrared remote control SUCTION/RELEASE Item No.: 7003-WL large warning lamp (flash light for collecting failures) Balance_2KS_GB.doc subject to changes 2/2

151 Vacuum Pump 7002-COMP in the crane rail Vacuum Pump 7002-COMP in the crane rail Frame 7000-A Kombi 7001-AS Manipulation Device 7025-MS Load testing of an individual suction cup Frame 7000-A Vacuum Lifting Units Servicing by the Specialist