Vacuum Lifting Devices for Horizontal Movement

Transcription

1 8001-H AH 8001-H2000 SO 7005-SO C-H SO A-H CSO Vacuum Lifting Devices for Horizontal Movement

2 These vacuum lifting units can be used to move horizontally stored plate material or sections. For example, we have moved glass, stone, concrete, lead blocks, aluminium plate, plastic and ceramic plate, coated chipboard, metal plate, boiler floors, and lots more besides. The surface to be lifted does not necessarily have to be smooth and flat. Even lifting of convex or concave curved material does not present any problem. We can offer units with integral or external vacuum generation. Mains electricity, battery powered or compressed air driven vacuum production oder aber druckluftbetriebene Vakuumeinheiten zur Verfügung. We also supply our unit range with twin circuit technology. Customized products pose no problem. Take advantage of the experience we ve gained in the production and application of vacuum lifting units since You can contact us at: Telephone: / Fax: / info@pannkoke.de DB#_7xxx-hori_GB.doc /2 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.de

3 Groups of Devices Vacuum Lifting Devices Type Description Description Group of Device Frame Kombi Carrying Frames without Vacuum Generation Carrying Frames with mains-operated, electrical vacuum pump Vacuum Unit mains-operated, electric Vacuum Unit 7002 Frame Venturi device Accu (Rechargeable Battery) Device Kombi Accu (Rechargeable Battery) Vacuum Unit Manipulation device Manipulation Device Kombi Carrying Frames with hand-operated vacuum pump Carrying Frames with Compressed air-operated vacuum pump (venturi jet) Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump mains-independent, electric (rechargeable batteryoperated) Vacuum Unit Carrying Frames with mains-operated, electrical vacuum pump and pneumatic drive Carrying Frames with compressed air-operated vacuum pump (venturi jet) and pneumatic drive Carrying Frames with mains-operated, electrical vacuum pump and electrical drive VT_Info_09_Gerätegruppen_GB.doc /4

4 Groups of Devices Vacuum Lifting Devices Type Description Description Group of Device Manipulation device Carrying Frames with 7035 compressed air-operated vacuum pump and electrical drive Manipulation device Carrying Frames with 7037 mains-independent, electrical (batteryoperated) vacuum pump and pneumatic drive Kombi Carrying Frames with 7041 mains-independent, electrical vacuum pump and electrical drive Kombi Vacuum Unit Venturi device Carrying Frame with mains-operated, electrical vacuum pump with 2-circuit-technique for the latest safety standard of the EC mains-operated, electric Vacuum Unit with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with Compressed air-operated vacuum pump (venturi jet) Accu (Rechargeable Battery) Device Kombi with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump 7211 VT_Info_09_Gerätegruppen_GB.doc /4

5 Groups of Devices Vacuum Lifting Devices Type Description Description Group of Device with 2-circuit-technique for the latest safety standard of the EC Accu (Rechargeable Battery) Vacuum Unit Manipulation Device Kombi Kombi mains-independent, electric (rechargeable batteryoperated) Vacuum Unit with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with compressed air-operated vacuum pump (venturi jet) and pneumatic drive with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with mains-operated, electrical vacuum pump and electrical drive with 2-circuit-technique for the latest safety standard of the EC Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump and electrical (battery-operated) drive with 2-circuit-technique for the latest safety standard of the EC Accu (Rechargeable Battery) Device Kombi Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump with 4-circuit-technique for the latest safety standard of the EC 7411 VT_Info_09_Gerätegruppen_GB.doc /4

6 Groups of Devices Vacuum Lifting Devices Type Description Description Group of Device Kombi Carrying Frames with mains-independent, electrical (batteryoperated) vacuum pump and electrical (battery-operated) drive with 4-circuit-technique for the latest safety standard of the EC 7441 VT_Info_09_Gerätegruppen_GB.doc /4

7 Possibilities of the Transport Movements Vertical Horizontal Turning tilting vertical horizontal horizontal - vertical tilting only vertical horizontal picking-up vertical horizontal horizontal vertical only via the lower edge VT_Info_03_Bewegung_GB.doc /1

8 Visit our Internet-Page

9 Table of Contents Vacuum Lifting Devices for horizontal lifting Which Device Groups are available? Table of Contents Device overview A Comparison of the Device Groups The Safety_Requirements of Vacuum Lifting Devices since within the EU Questionnaire for the Selection of a Vacuum Lifting Device 7000-xx Frame Carrying Frame without vacuum generation 7202 Vacuum Unit mains-operated, electric vacuum pump 7202-HANDY2 (2KS) 7000-H H A-H 7000-C-SO Vacuum Unit mains-operated, electric vacuum pump 7002-Standard 7212 Accu Vacuum Unit battery-supplied, electric vacuum pump 7212-HANDY HANDY xx Kombi Carrying Frame with mains-operated, electric vacuum pump (2KS) (2KS) 7012 Accu Vacuum Unit battery-supplied, electric vacuum pump 7012-Handy 7012-HANDY HANDY AX-H 7001-A-H SO SO F CSO 7001-C-H H HG IV_01_Geräteübersicht_horizontal_GB.doc /2

10 7011 Accu Device Kombi Carrying Frame with battery-supplied, electric vacuum pump Table of Contents Vacuum Lifting Devices for horizontal lifting 7005 Venturi Device Carrying Frames with compressed air-operated Vacuum Pump / Venturi Jet(s) 7011-HandyMan 7011-Combat 7011-CSO 7011-H GSK 7005-H H1/E 7005-H2/E 7005-H3/E 7005-H1/E SO CSO 7005-CSO/E 7005-H SO C-H-1000/E 7005-SO98 IV_01_Geräteübersicht_horizontal_GB.doc /2

11 Overview Vacuum Lifting Devices for horizontal lifting Device Type No of vacuum circuits ( ) 7000-A-H X 7000-C-1000 SO X 7000-H X 7000-H X 7001-A-H X 7001-AX-H X 7001-C-H X 7001-F X 7001-HG X X 7001-SO X 7001-SO X 7005-C-H-1000/E X 7005-CSO X 7005-CSO/E X 7005-H1E X 7005-H2/E X 7005-H3/E X IV_03_Geräteübersicht_horizontal_GB.doc /2

12 Overview Vacuum Lifting Devices for horizontal lifting Device Type No of vacuum circuits ( ) 7005-H3/E SO X 7005-H X 7005-SO X 7011-Combat X 7011-CSO X 7011-H X 7011-HandyMan X 8001-H X 8011-GSK X IV_03_Geräteübersicht_horizontal_GB.doc /2

13 #TB_Sicherheitsanforderung_GB.doc Safety Requirements for Vacuum Lifting Devices

14 Visit our Internet-Page

15 Safety Requirements Safety requirements for vacuum lifting devices taken from the European Standard EN 13155:2003 This draft for safety requirements of non-fixed load lifting attachments makes some essential requirements on a vacuum lifting device, which have to be fulfilled by each load suspension device and some only by vacuum lifting devices. Also, safety requirements for grabs and tongs are defined in this draft. The title of this standard is: Krane Lose Lastaufnahmemittel Cranes Non-fixed load lifting attachments Appareils de levage à charge suspendue Equipements amovibles de prise de charge This standard is valid in all the EU countries. All new load lifting attachments brought into circulation since the must conform to this standard, this, at least, is our understanding. The forward to this standard contains the following: This document (EN 13155:2003) has been prepared by Technical Committee CEN/TC 147 Cranes - Safety, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2004, and conflicting national standards shall be withdrawn at the latest by January This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). To determine the relationship to the EC Directive, see the information in Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Section 5 lists safety requirements and or measures. Particular requirements relating to vacuum lifting devices are given under point of the standard. VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

16 Safety Requirements Requirements Vacuum lifters shall be dimensioned to hold at least a load corresponding to two times the working load limit at the end of the working range and the beginning of the danger range respectively at all intended angles of tilt. The maximum angles of tilt shall be increased in accordance with NOTE: The pressure range within which it is possible to work is termed the working range. The danger range adjoins the working range. In some vacuum lifting systems, in particular self-priming vacuum lifters, the resultant pressure decrease depends upon the weight of the load Non-self-priming vacuum lifters shall be equipped with a pressure measuring device clearly showing the working range and the danger range of the vacuum Self-priming vacuum lifters shall be equipped with an indicator showing to the operator that the end of the working range is reached The measuring device or the indicator respectively shall be fully visible for the slinger or, if there is no slinger, for the driver of the crane when in his normal working position. Solutions at Pannkoke The loading capacity of our built-in suction cups has a 2-fold safety factor at the minimum permissible depression. The suction cups 388 were tested in the Fachhochschule Kiel with both a slide-off and a pull-off test. The suction cup 388 carrys 100 kg with a 2fold safety factor. Our control vacuum meter has already been in use since the seventies and each of our vacuum lifting devices has such a control vacuum meter. The working range is marked green, the danger area red. This type of device is not manufactured by Pannkoke. Each vacuum lifting device with built-in electric vacuum generation has a control vacuum meter, an acoustical and an optical warning signal which indicates a too low partial vacuum and this since the beginning of the eighties. Rechargeable battery-operated vacuum lifting devices have been equipped since 2000 with two optical warning signals. Optionally we offer a large flash lamp as warning means and this is available for all electric operated devices with 2KS technology. Compressed air powered vacuum lifting devices have had a control vacuum meter and an acoustic warning signal since Means shall be provided to prevent the risks due to vacuum losses. This shall be: VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

17 Safety Requirements Requirements a) in the case of vacuum lifters with a vacuum pump: a vacuum reservoir with a non-return valve between the vacuum reservoir and the pump, located as close as possible to the vacuum reservoir b) in the case of vacuum lifters with Venturi-systems: a pressure reservoir tank or vacuum reservoir tank with a non-return valve between the vacuum reservoir and the Venturi system, located as close as possible to the vacuum reservoir; c) in the case of turbine vacuum lifters: a supporting battery or an additional flywheel-mass; d) in the case of self-priming vacuum lifters: a reservestroke at least equal to 5 % of the total stroke of the piston.. NOTE: Vacuum losses can occur for example, due to leaks, or in the case of non self-priming vacuum lifters, due to a power failure. Solutions at Pannkoke The carrying frame or parts of the carrying frame of our vacuum lifting devices are constructed in general as a vacuum tank. At the newer devices' type a will recognizable vacuum tank is used and it doesn't belong to the carrying parts. The tightness of the system is tested before delivery. Only devices which lose less than 5 % vacuum within 15 minutes will be delivered. With the rechargeable battery operated vacuum lifting devices there is also the fact that if the vacuum falls below a certain limit during use, the vacuum will be increased via the accumulator vacuum pump. Only compressed air powered vacuum lifting devices with a closed vacuum system have been manufactured since The carrying frame or parts of the carrying frame of our vacuum lifting devices are constructed in general as a vacuum tank. At the newer devices' type a will recognizable vacuum tank is used and it doesn't belong to the carrying parts. The tightness of the system is tested before delivery. Only devices which lose less than 5 % vacuum within 15 minutes will be delivered. This type of device is not manufactured by Pannkoke. This type of device is not manufactured by Pannkoke There shall be a device to warn automatically when the danger range is reached, if vacuum losses can not be compensated. The indication shall be optical and/or acoustic, depending upon the circumstances of use for the vacuum lifter, and in accordance with EN 981, EN 842 and EN 457; The warning device shall work even if there is a power supply failure to the vacuum lifter. NOTE: The warning device is not the pressure measuring device of or the indicator of Each vacuum lifting device with built-in electric vacuum generation has a control vacuum meter, an acoustical and an optical warning signal which indicates a too low partial vacuum and this since the beginning of the eighties. Rechargeable battery-operated vacuum lifting devices have been equipped since 2000 with two optical warning signals. Optionally we offer a large flash lamp as warning means and this is available for all electric operated devices with 2KS technology. Compressed air powered vacuum lifting devices have had a control vacuum meter and an acoustic warning signal since 2004 VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

18 Safety Requirements Requirements Solutions at Pannkoke In case of power failure, the vacuum lifter shall be able to hold the load for 5 minutes. This is not necessary in no-go areas and this is not necessary for turbine vacuum lifters if all the following conditions are met: the operator maintains control of the load through steering handles which ensures that the operator is outside the danger zone in case of the load falling; in addition to clause a warning device shall be activated as soon as the power fails; the manufacturer shall prohibit lifting of the geometric centre of the suction pads above 1.8 m by marking and instructions for use. Since 2000, we have only manufactured vacuum lifting devices with one or more closed vacuum circuits (see ). The tightness of the system is tested before delivery. Only devices which lose less than 5 % vacuum within 15 minutes will be delivered For vacuum lifters intended to be used in a building area a secondary positive holding device is required or there shall be two vacuum reserves each fitted with non-return valves. Each vacuum reserve shall be connected to a separate set of suction pads. Each set of suction pads shall fulfil the requirement of the clause The releasing of the load shall be actuated by a two action control. This is not necessary if the release of the load is not possible until the load has been put down or in no-go areas. All units in the 7201, 7211 or 7411 ranges have two independent vacuum circuits and are suitable for building site use. The conversion to point means that each vacuum circuit must be able to support the nominal load with 2-fold safety. This is only necessary for devices which are to be used on a building site. Each vacuum circuit requires the same monitoring functions as a device with only one vacuum circuit. When using a single circuit vacuum lifting device on a building site, an additional locking-fit support device must be used, which must be able to support the nominal load by itself at all times with the required degree of safety in every position. For example, this can be resolved by using brackets or a load strap up until the time of use. All of these measures fail only in an actual dangerous activity and the operator is then hard pressed to explain how the working of his safety measure conforms to the standard, when an accident has already occurred. For electrical lifting devices this is achieved by using a mushroom button (such as an emergencyoff switch). It has to be turned for changing. The mushroom-shaped key is in a housing with edge protection and with that the actuating element is protected by the surrounding mechanical protection. A protective shield is built around the hand valve(s) to prevent an unintentional actuation. Since 2004, compressed air powered devices have only been supplied with single-hand twofold actuation Controls for tilting or turning movements shall be hold- VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

19 Safety Requirements Requirements to-run type. Solutions at Pannkoke The shape of the suction pad shall be matched to that of the intended load(s). If more than one suction pad is used in conjunction with a lifting beam, the layout and working load limit of the suction pads shall be matched to that of the intended load(s). The share of the load which can foreseeable be imposed on each suction pad shall not exceed its working load limit taking account of the rigidity of both the load and the vacuum lifter. Under item 7 there are special requirements concerning user information. Under item vacuum lifting devices there are special requirements concerning the user information. A) Checking of the vacuum level; B) Measures to be taken as soon as the warnings are actuated; C) Checking of the condition of the vacuum connections and hoses; D) Checking of the condition of the suction pads. Also the minimum marking is clearly described under point This minimum marking has to be on a durable label: a) Identification of manufacturer (or authorized representative or importer); b) Type c) Serial number; d) Dead weight e) Year of construction f) Carrying capacity in kg g) CE-mark. VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

20 Safety Requirements Requirements which go beyond the safety draft of the CEN/TC 151/WG 13/SG A1. This working group has the following title: Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory Requirements The vacuum shall have redundancy so that if part of the systems fails then the remaining part of it shall be capable of supporting the actual load. Solutions at Pannkoke For our new devices with 2-circuit-vacuum-system (2KS) this is the case for electric as well as for compressed-air operated vacuum lifting devices Systems shall be provided to control and monitor vacuum losses comprising: a) In the case of vacuum lifters with a vacuum pump a reserve vacuum tank of minimum volume of at least twice the total evacuated volume of the system. b) In the case of vacuum lifters with injector venturi, every injector shall be equipped with a non return valve For raw glass either guarding on the rear of the frame with handles or guide handles alone shall be fitted and arranged in a way which protects the operator from falling glass. No guarding is required for small plates (maximum dimension less than 2M), provided the distance from the sucker cup edge of the glass is less than the distance the guide handles are from he glass It shall be possible to guide vacuum lifters using both hands, even if the operator has to simultaneously operate a hoist. The carrying frame or parts of the carrying frame of our vacuum lifting devices are constructed in general as a vacuum tank. At the newer devices' type a will recognizable vacuum tank is used and it doesn't belong to the carrying parts. The tightness of the system is tested before delivery. Only devices which lose less than 5 % vacuum within 15 minutes will be delivered. With the rechargeable battery operated vacuum lifting devices there is also the fact that if the vacuum falls below a certain limit during use, the vacuum will be increased via the accumulator vacuum pump. Behind the venturi jet (injector) is a non-return valve and then a vacuum tank. At 2KS System is for each vacuum circuit a vacuum tank with non-return valve available. Is available optionally on request for the corresponding glass size. Is available optionally on request for the corresponding glass size. VT_Info_15_Sicherheitsanforderungen_2004_GB.doc /6

21 #TB_Fragebogen_GB.doc Questionnaire Vacuum Handling Technique

22 Visit our Internet-Page

23 Questionnaire: Vacuum Handling Technique Company (company stamp) Person in charge: Phone: Fax: With our vacuum equipment devices you can lift, hold and transport many different materials such as glass, synthetics, concrete, sheets, plastic coated and gastight chip board, stone etc. The surface can be planed and in some cases curved or beaded. It is also possible to work with materials up to 330 degrees Celsius. 1. Material to be lifted: 2. Condition of the surface gastight [ ] yes [ ] no Surface temperature: C damp [ ] yes [ ] no dusty [ ] yes [ ] no Surface plane [ ] yes [ ] no radius: [ ] smooth [ ] rough [ ] 3. Weight of the transport load: 4. Max. dimensions of the transport load (length x width x thickness): 5. Min. dimensions of the transport load (length x width x thickness): 6. How shall the transport load be moved? [ ] horizontal [ ] vertical [ ] horizontal and vertical 7. Which manipulating possibilites are preferred? [ ] tilting by 90 [ ] turning by 90 [ ] 8. How shall the manipulating movement be executed? [ ] manual [ ] electrical [ ] pneumatic [ ] 9. How is the transport load being stored? [ ] standing [ ] lying [ ] in a rack [ ] in a case [ ] VT_01_Fragebogen_für_Vakuumhebegeräte_GB.doc /2

24 Questionnaire: Vacuum Handling Technique 10. Where shall the transport load be transported? [ ] within the factory [ ] on the site [ ] open-air ground [ ] 11. Which load suspension device is available? [ ] craneway [ ] column crane [ ] mobile crane [ ] fork stacker [ ] 12. Which suspension will you prefer? [ ] steel cable sling [ ] suspension eye [ ] crane hook for kg 13. Which power supply is available and/or requested? [ ] current voltage: V frequency: Hz phases: [ ] Rechangeable battery-operation (possible to some extent) [ ] Compressed air bar 14. How shall the connection to the power supply be executed: hose winder, cable lap winder, length etc.? 15. How shall the vacuum be generated? [ ] built-in vacuum pump [ ] external vacuum pump [ ] venturi jet [ ] 16. How long must the vacuum be held? 17. Should the device be dismountable (for transport and/or storage)? [ ] no [ ] yes how? 18. Do you need a remote control? [ ] no [ ] yes ( ) at the guide handle of the device ( ) in the hand --- how long? m 19. Should the suction cups be individually lockable? [ ] no [ ] yes 20. Is the surface easily soiled? [ ] insensitive [ ] the suction cups may not leave marks (non-abrasive) VT_01_Fragebogen_für_Vakuumhebegeräte_GB.doc /2

25 7000-xx Carrying Frames without vacuum generation #TB_7000_GB.doc

26 Visit our Internet-Page

27 Frame 7000-H1 For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system control vacuum meter on the device suction cups fixed directly on the frame Vacuum Generation external vacuum generation necessary e. g. via a Pannkoke Compound Pump 7002-COMP2 in the craneway horizontal Control Means SUCTION/RELEASE via hand valve at the device or via remote control of the vacuum generation Suspension: Safe Working Load: Colour: crane eye at the carrying frame 130 kg yellow / partly zinked 7000-H1_GB.doc subject to changes 1/2

28 suitable for lifting material properties gas-tight surface smooth e. g. glass, plastic and ceramic plates, sheets metal, coated boards, gypsum plaster boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 1 safe working load on smooth and clean surface at 60 % vacuum kg 130 dead weight approx. kg vacuum infeed connection 9 mm Item No.: 7005-H1 Further dimensions and designs on request 7000-H1_GB.doc subject to changes 2/2

29 Frame 7000-H150 For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system control vacuum meter on the device single row arrangement of suction cups suction cups fixed directly on the carrying bar fixed suction cup spacing Vacuum Generation external vacuum generation necessary e. g. via a Pannkoke Compound Pump 7002-COMP2 in the craneway horizontal Control Means SUCTION/RELEASE via hand valve at the device or via remote control of the vacuum generation Suspension: Safe Working Load: Colour: crane eye at the carrying frame 150 kg yellow / partly zinked 7000-H150_GB.doc subject to changes 1/2

30 suitable for lifting material properties gas-tight surface smooth curved e. g. glass, plastic and ceramic plates, sheets metal, coated boards, gypsum plaster boards suction cup type diameter in action approx. mm x quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 2 length of carrying frame approx. mm 1000 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg vacuum infeed connection 9 mm Item No.: 7005-H Further dimensions and designs on request 7000-H150_GB.doc subject to changes 2/2

31 Frame 7000-A-H For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system control vacuum meter on the device single row arrangement of suction cups suction cups fixed with movable suspension directly to the carrying bar distance of suction cups can be adjusted Vacuum Generation external vacuum generation necessary e. g. via a Pannkoke Compound Pump 7002-COMP2 in the craneway horizontal Control Means SUCTION/RELEASE via hand valve at the device or via remote control of the vacuum generation Suspension: Safe Working Load: Colour: crane eye at the carrying frame 1000 kg yellow 7000-A-H_GB.doc subject to changes 1/2

32 suitable for lifting material properties gas-tight surface smooth e. g. glass sheets, plastic and ceramic plates, coated boards, sheets metal, gypsum plaster boards suction cup type / /37 diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups length of carrying frame approx. mm safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg vacuum infeed connection quick release coupling 9 mm Item No.: 7000-A-H Special Design on request 7000-A-H_GB.doc subject to changes 2/2

33 Frame 7000-C-1000 SO01 For operation on EC construction sites only permissible with mechanical holding device according to for horizontal lifting and transporting Description 1-circuit vacuum system control vacuum meter on the device multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cups fixed with movable suspension directly to the cross carrying bar distance of suction cups can be adjusted modular device construction vertical transport approx. 75 Vacuum Generation external vacuum generation necessary e. g. via a Pannkoke Compound Pump 7002-COMP2 in the craneway Control Means SUCTION/RELEASE via hand valve at the device or via remote control of the vacuum generation horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 1000 kg yellow / partly zinked 7000-C-1000_SO01_GB.doc subject to changes 1/2

34 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, insulation glass units, plastic and ceramic plates, coated boards suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant length of carrying frame approx. mm longitudinal-carrying bar length max. approx. mm number of the cross carrying bars length of the cross carrying bars approx. mm number of suction cups safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg vacuum infeed connection 9 mm Item No.: 7000-C Special Design on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup C-1000_SO01_GB.doc subject to changes 2/2

35 7002-xx mains-operated, electric vacuum pump 7012-xx battery-supplied, electric vacuum pump #TB_7002&7012_GB.doc

36 Visit our Internet-Page

37 Standard Pump 7002-Standard Standard Pump for installation to machines, stacking devices etc. Description 1-circuit vacuum system the vacuum circuit has a 20 l vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Mean: ON/OFF SUCTION/RELEASE via hand valve at the device Installation vertically, horizontally or hanging possible Colour: yellow 7002-Standard_GB.DOC subject to changes 1/2

38 assembly dimension length approx. mm 650 width approx. mm 220 height approx. mm 510 dead weight approx. kg 35 vacuum infeed connection 9 mm outout approx. 7.0 m³/h voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7002-Standard special voltage on request 7002-Standard_GB.DOC subject to changes 2/2 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.de

39 Accu Vacuum Unit 7012-Handy the vacuum generation for versatile application for frames from small to mid-sized Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: approx. 27 kg Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Item-no HANDY voltage charger for battery 110 Volt 50/60 Hz 1 Ph Item-no HANDY HANDY_GB.DOC subject to changes 1/2

40 Accessories on request Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BK/DS infrared remote control SUCTION/RELEASE only outside the EC Connection Elements to the frame Hose Winder with 10 m hose 7003-T45A Hose Winder with hose in special length 7003-T45AS Hose Spiral approx. 5 m 7003-SP HANDY_GB.DOC subject to changes 2/2

41 Accu Vacuum Unit 7012-HANDY 2 the vacuum generation for versatile application for frames from small to mid-sized Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: approx. 27 kg Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Item-no HANDY voltage charger for battery 110 Volt 50/60 Hz 1 Ph Item-no HANDY HANDY2_GB.doc subject to changes 1/2

42 Accessories on request Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Connection Elements to the frame Hose Winder with 10 m hose 7003-T45A Hose Winder with hose in special length 7003-T45AS Hose Spiral approx. 5 m 7003-SP HANDY2_GB.doc subject to changes 2/2

43 Accu Vacuum Unit 7012-HANDY 3 the vacuum generation for versatile application for frames from small to mid-sized Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control optional via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Best.-Nr HANDY3 voltage charger for battery 110 Volt 50/60 Hz 1 Ph Best.-Nr HANDY HANDY3_GB.DOC subject to changes 1/2

44 Accessories on request Item No.: 7003-BK/DS cable remote control SUCTION/RELEASE Item No.: 7003-IR2S infrared remote control SUCTION/RELEASE Item No.: 7003-BK/DS infrared remote control SUCTION/RELEASE only outside the EC Connection Elements to the frame Hose Winder with 10 m hose 7003-T45A Hose Winder with hose in special length 7003-T45AS Hose Spiral approx. 5 m 7003-SP HANDY3_GB.DOC subject to changes 2/2

45 7202-xx mains-operated, electric vacuum pump 7212-xx battery-supplied, electric vacuum pump #TB_7202&7212_GB.doc

46 Visit our Internet-Page

47 Vacuum Unit 7202-HANDY2 2-circuit vacuum pump according to EN the vacuum generation for versatile application for frames from small to mid-sized Description 2-circuit vacuum system each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure interconnected operation possible up to 4 vacuum units Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Output: 3 m³/h Vacuum infeed connection: 9 mm Dead weight: approx. 27 kg Colour: yellow Voltage 400 Volt 50/60 Hz 3 Ph Item-no HANDY2-400 Voltage 230 Volt 50/60 Hz 1 Ph Item-no HANDY2-230 Voltage 110 Volt 50/60 Hz 1 Ph Item-no HANDY HANDY2_GB.doc subject to changes 1/2

48 Accessories on request Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: 7003-WL24 large warning lamp (flash light for collecting failures) 7202-HANDY2_GB.doc subject to changes 2/2

49 Accu Vacuum Unit 7212-HANDY2 2-circuit vacuum pump according to EN the vacuum generation for versatile application for frames from small to mid-sized Description 2-circuit vacuum system each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure interconnected operation possible up to 4 vacuum units Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: approx. 27 kg Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Item-no HANDY2 voltage charger for battery 110 Volt 50/60 Hz 1 Ph Item-no HANDY HANDY2_GB.doc subject to changes 1/2

50 Accessories on request Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: WL12 large warning lamp (flash light for collecting failures) 7212-HANDY2_GB.doc subject to changes 2/2

51 Accu Vacuum Unit 7212-HANDY 3 2-circuit vacuum pump according to EN the vacuum generation for versatile application for frames from small to mid-sized Description 2-circuit vacuum system each vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter 2 completely closed vacuum circuits prevent loss of vacuum at power failure interconnected operation possible up to 4 vacuum units Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device optional via cable remote control or via infrared remote control Output: 1.5 m³/h Vacuum infeed connection: 9 mm Dead weight: Colour: yellow voltage charger for battery 230 Volt 50/60 Hz 1 Ph Best.-Nr HANDY3 voltage charger for battery 110 Volt 50/60 Hz 1 Ph Best.-Nr HANDY HANDY3_GB.doc subject to changes 1/2

52 Accessories on request Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Item No.: WL12 large warning lamp (flash light for collecting failures) 7212-HANDY3_GB.doc subject to changes 2/2

53 7001-xx Carrying Frames with mains-operated, electric vacuum pump #TB_7001_GB.doc

54 Visit our Internet-Page

55 Possibilities of the Transport Movements only horizontal horizontal #TB_horizontal_GB.doc /1 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.com

56 Visit our Internet-Page

57 Kombi 7001-AX-H For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system single row arrangement of suction cups suction cups fixed directly on the carrying bar fixed suction cup spacing Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply horizontal Control Means SUCTION/RELEASE via hand valve at the device or via cable remote control Suspension: Safe Working Load: Colour: crane eye at the carrying frame 300 kg yellow / partly zinked 7001-AX-H_GB.doc subject to changes 1/2

58 suitable for lifting material properties gas-tight surface smooth e. g. tubes, profiles, narrow sheet strips etc. suction cup type Diameter / area in action approx. mm x x 80 quality of suction cups rubber black abrasion possible up to 100 heat resistance longitudinal-carrying bar length max. approx. mm number of suction cups 3 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 3.8 m³/h voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-AX-H voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-AX-H voltage 110 Volt 50/60 Hz 1 Ph Item No.: 7001-AX-H Special Design and Special Voltage on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: SCH protection cap for suction cup AX-H_GB.doc subject to changes 2/2

59 Kombi 7001-A-H-1000 For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system single row arrangement of suction cups suction cups fixed with movable suspension directly to the carrying bar distance of suction cups can be adjusted modular device construction Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 1000 kg yellow / partly zinked 7001-A-H-1000_GB.doc subject to changes 1/2

60 suitable for lifting material properties gas-tight surface smooth e. g. tubes, profiles, narrow sheet strips etc. suction cup type diameter in action approx. mm x 80 quality of suction cups black rubber abrasion possible up to 100 C heat resistant length of carrying frame approx. mm longitudinal-carrying bar length max. approx. mm number of suction cups safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 3.8 m³/h voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-A-H voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-A-H voltage 110 Volt 50/60 Hz 1 Ph Item No.: 7001-A-H Special Design and Special Voltage on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: SCH protection cap for suction cup Also available as 2-circuit vacuum lifting device (Type 7201-A-H-1000) in accordance to EN / pren A-H-1000_GB.doc subject to changes 2/2

61 Kombi 7001-SO18 For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting of sheet metal plates with sparing etc. Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system 12 individual suction cups with self shut-off guide bow holder for crane switch Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 200 kg yellow 7001-SO18_GB.doc subject to changes 1/2

62 suitable for lifting material properties gas-tight surface smooth e. g. plastic and ceramic plates, coated boards, metal sheets suction cup type single suction cup size in action approx. mm 120 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 12 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 3.8 m³/h voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-SO18... voltage 110 Volt 50 Hz Item No.: 7001-SO voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-SO other frame sizes on request 7001-SO18_GB.doc subject to changes 2/2

63 Kombi 7001-SO17 For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system replaceable sponge rubber suction cup different sizes of sponge rubber suction cups available guide bow holder for crane switch Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply horizontal Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device Suspension: Safe Working Load: Colour: crane eye at the carrying frame 500 kg yellow 7001-SO17_GB.doc subject to changes 1/2

64 suitable for lifting material properties gas-tight surface smooth e. g. plastic and ceramic plates, coated boards, metal sheets, checker plates, stone plates suction cup type suction cup size in action approx. mm quality of suction cups number of suction cups 1 safe working load on smooth and clean surface black rubber abrasion possible up to 100 C heat resistant at 60 % vacuum kg dead weight approx. kg output 3.8 m³/h voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-SO17... I II III IV voltage 110 Volt 50 Hz Item No.: 7001-SO17... I-110 II-110 III-110 IV-110 voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-SO17... I-400 II-400 III-400 IV-400 other frame sizes on request 7001-SO17_GB.doc subject to changes 2/2

65 Kombi 7001-F01 For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups suction cups fixed directly on the frame fixed suction cup spacing all suction cups lockable individually guide bow holder for crane switch Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 1000 kg yellow 7001-F01_GB.doc subject to changes 1/2

66 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 4 length of carrying frame approx. mm width of carrying frame approx. mm safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 3.0 m³/h voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-F voltage 110 Volt 50 Hz Item No.: 7001-F voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-F other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup 540 Also available as 2-circuit vacuum lifting device (Type 7201-F01) in accordance to EN / pren F01_GB.doc subject to changes 2/2

67 Kombi 7001-CSO For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cups fixed with movable suspension directly to the cross carrying bar distance of suction cups can be adjusted all suction cups lockable individually guide bow holder for crane switch Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply horizontal Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control Suspension: 4-fold crane string Safe Working Load: 400 kg Colour: yellow / partly zinked 7001-CSO_GB.doc subject to changes 1/2

68 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups longitudinal carrying bar length approx. mm length of the cross carrying bars approx. mm number of the cross carrying bars safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 3.0 m³/h voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-CSO voltage 110 Volt 50 Hz Item No.: 7001-CSO voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-CSO other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup 540 Also available as 2-circuit vacuum lifting device (Type 7201-CSO) in accordance to EN / pren CSO_GB.doc subject to changes 2/2

69 Kombi 7001-C-H-1000 For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cups fixed with movable suspension directly to the cross carrying bar distance of suction cups can be adjusted all suction cups lockable individually modular device construction Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Means SUCTION/RELEASE via cable remote control horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 1000 kg yellow / partly zinked 7001-C-H-1000_GB.doc subject to changes 1/2

70 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type 388 Diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant length of carrying frame approx. mm longitudinal-carrying bar length max. approx. mm number of the cross carrying bars length of the cross carrying bars approx. mm number of suction cups safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 3.8 m³/h voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-C-H voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-C-H voltage 110 Volt 50/60 Hz 1 Ph Item No.: 7001-C-H Special Design and Special Voltage on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Also available as 2-circuit vacuum lifting device (Type 7201-C-H-1000) in accordance to EN / pren C-H-1000_GB.doc subject to changes 2/2 Address: Haendelweg Luebeck Germany Phone: info@pannkoke.de

71 Kombi 8001-H2000 For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cups fixed with movable suspension directly to the cross carrying bar distance of suction cups can be adjusted all suction cups lockable individually Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 2000 kg yellow / partly zinked 8001-H2000_GB.doc subject to changes 1/2

72 suitable for lifting material properties gas-tight surface smooth e. g. glass sheets, plastic and ceramic plates, coated boards, sheets metal, gypsum plaster boards suction cup type / /37 diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups length of carrying frame approx. mm width of the device approx. mm number of the cross carrying bars safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 6.0 m³/h voltage 400 Volt 50/60 Hz 3 Ph Item No.: 8001-H Special Design and Special Voltage on request 8001-H2000_GB.doc subject to changes 2/2

73 Kombi 7001-HG For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting of convex and concave curved materials Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum power failure monitoring system multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cup mounted flexibly on the cross carrying bar with chains each individual chain length adjustable distance of suction cups can be adjusted all suction cups lockable individually modular device construction Vacuum Generation built-in low maintenance vacuum pump (dry running system) for mains supply horizontal Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control Suspension: Safe Working Load: Colour: crane eye at the carrying frame 500 kg yellow / partly zinked 7001-HG_GB.doc subject to changes 1/2

74 suitable for lifting material properties surface gas-tight smooth convex and concave curved radius minimum 1000 mm e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type 535 diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant length of carrying frame approx. mm longitudinal-carrying bar length max. approx. mm number of the cross carrying bars length of the cross carrying bars approx. mm number of suction cups safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 3.8 m³/h voltage 400 Volt 50/60 Hz 3 Ph Item No.: 7001-HG voltage 230 Volt 50/60 Hz 1 Ph Item No.: 7001-HG voltage 110 Volt 50/60 Hz 1 Ph Item No.: 7001-HG Special Design and Special Voltage on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup HG_GB.doc subject to changes 2/2 Address: Haendelweg Luebeck Germany Phone: info@pannkoke.de

75 7011-xx Carrying Frame with battery-supplied, electric vacuum pump #TB_7011_GB.doc

76 Visit our Internet-Page

77 Possibilities of the Transport Movements only horizontal horizontal #TB_horizontal_GB.doc /1 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.com

78 Visit our Internet-Page

79 Accu-Device Kombi 7011-HandyMan For construction site transport near to the ground only for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure acoustic signal indicates insufficient vacuum suction cup exchangeable modular device construction guide bow Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) plug-in connection for charging unit for charging overnight no cable - no hose horizontal Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device Suspension: Safe Working Load: Colour: crane eye at the carrying frame 160 kg blue 7011-HandyMan_GB.doc subject to changes 1/2

80 suitable for lifting material properties gas-tight surface smooth, coarse e. g. metal sheets, metal ingots, stone plates, stone blocks, border stones etc. suction cup type Suction cup surface x 800 in action approx. mm quality of suction cups black rubber abrasion possible safe working load on smooth and clean surface kg dead weight without extension and guide bows approx. kg with extension and guide bows approx. kg output 1.9 m³/h charging voltage 230 Volt 50 Hz Item No.: 7011-HandyMan Special Design on request Accessories on request Item No.: HandyMan S Item No.: HandyMan S Item No.: HandyMan S exchange suction cup for 150 kg exchange suction cup for 100 kg exchange suction cup for border stones 7011-HandyMan_GB.doc subject to changes 2/2

81 Accu-Device Kombi 7011-Combat For construction site transport near to the ground only for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure acoustic signal indicates insufficient vacuum suction cup exchangeable modular device construction guide bow Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) plug-in connection for charging unit for charging overnight no cable - no hose horizontal Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device Suspension: Safe Working Load: Colour: crane eye at the carrying frame 485 kg blue 7011-Combat_GB.doc subject to changes 1/2

82 suitable for lifting material properties gas-tight surface smooth, coarse e. g. metal sheets, metal ingots, stone plates, stone blocks, border stones etc. suction cup type diameter in action approx. mm x 800 quality of suction cups black rubber abrasion possible safe working load on smooth and clean surface at 60 % vacuum kg dead weight without suction cup 29 output 3.4 m³/h charging voltage 230 Volt 50 Hz Item No.: 7011-Combat Special Design Accessories on request Item No.: Combat-HG Item No.: Combat-VL Item No.: Combat S Item No.: Combat S Item No.: Combat S Item No.: Combat S on request guide bows extension between device and suction cup exchange suction cup for 485 kg exchange suction cup for 300 kg exchange suction cup for 130 kg exchange suction cup for border stones 7011-Combat_GB.doc subject to changes 2/2

83 Accu-Device Kombi 7011-CSO For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cups fixed with movable suspension directly to the cross carrying bar distance of suction cups can be adjusted all suction cups lockable individually guide bow holder for crane switch Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose horizontal Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Suspension: Safe Working Load: Colour: 4-fold crane string 400 kg yellow / partly zinked 7011-CSO_GB.doc subject to changes 1/2

84 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups longitudinal carrying bar length approx. mm length of the cross carrying bars approx. mm number of the cross carrying bars safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7011-CSO voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7011-CSO other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup 540 Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Also available as 2-circuit vacuum lifting device (Type 7211-CSO) in accordance to EN / pren CSO_GB.doc subject to changes 2/2

85 Accu-Device Kombi 7011-H2000 For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cups fixed with movable suspension directly to the cross carrying bar distance of suction cups can be adjusted all suction cups lockable individually modular device construction guide bow holder for crane switch Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose horizontal Control Means ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device or via cable remote control optional via infrared remote control Suspension: Safe Working Load: Colour: crane eye at the carrying frame 2000 kg yellow / partly zinked 7011-H2000_GB.doc subject to changes 1/2

86 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups length of carrying frame approx. mm width of the device approx. mm number of the cross carrying bars safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 1.5 m³/h voltage charger for battery 230 Volt 50 Hz Item No.: 7011-H voltage charger for battery 110 Volt 50 Hz Item No.: 7011-H Special Design and Special Voltage on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup 540 Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Also available as 2-circuit vacuum lifting device (Type 7211-H2000) in accordance to EN / pren H2000_GB.doc subject to changes 2/2

87 Accu-Device Kombi 8011-GSK For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting with a fork lifter horizontal Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups modular device construction Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Suspension: Safe Working Load: Colour: acceptance shoe for the fork lifter's fork 1000 kg yellow 8011-GSK_GB.doc subject to changes 1/2

88 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type /37 diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups safe working load on smooth and clean surface at 60 % vacuum kg output 1.5 m³/h voltage charger for battery 230 Volt 50 Hz Item No.: 8011-GSK voltage charger for battery 110 Volt 50 Hz Item No.: 8011-GSK Special Design and Special Voltage on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup 540 Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC 8011-GSK_GB.doc subject to changes 2/2

89 7005-xx Carrying Frames with compressed air-operated vacuum pump / venturi jet(s) #TB_7005_GB.doc

90 Visit our Internet-Page

91 Possibilities of the Transport Movements only horizontal horizontal #TB_horizontal_GB.doc /1 Address: Haendelweg 5 D Luebeck Germany Phone: info@pannkoke.com

92 Visit our Internet-Page

93 Venturi Device 7005-H150 1-Circuit Vacuum Lifting Device for the use outside the EC for horizontal lifting and transporting Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve control vacuum meter on the device single row arrangement of suction cups suction cups fixed with movable suspension directly on the frame distance of suction cups can be adjusted suction cups are spring-mounted Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary horizontal Control Means air pressure ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device Suspension: Safe Working Load: Colour: crane eye at the carrying frame 200 kg yellow / partly zinked 7005-H150_GB.doc subject to changes 1/2

94 suitable for lifting material properties gas-tight surface smooth curved e. g. glass, plastic and ceramic plates, sheets metal, coated boards, gypsum plaster boards suction cup type diameter in action approx. mm x quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 2 length of carrying frame approx. mm 1000 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg air pressure connection quick release coupling 9 mm Item No.: 7005-H other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup 540 Item No.: SCH protection cap for suction cup Also available with a power failure monitoring system for the use within the EC H150_GB.doc subject to changes 2/2

95 Venturi Device 7005-H1/E 1-circuit vacuum lifting device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve power failure monitoring system control vacuum meter on the device Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary Control Means air pressure ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 250 kg yellow / partly zinked 7005-H1E_GB.doc subject to changes 1/2

96 suitable for lifting material properties gas-tight surface smooth e. g. glass, plastic and ceramic plates, sheets metal, coated boards, gypsum plaster boards suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 1 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg 8 8 air pressure connection quick release coupling 9 mm Item No.: 7005-H1/E other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup H1E_GB.doc subject to changes 2/2

97 Venturi Device 7005-H2/E 1-circuit vacuum lifting device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve power failure monitoring system control vacuum meter on the device Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary Control Means air pressure ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 200 kg yellow / partly zinked 7005-H2E_GB.doc subject to changes 1/2

98 suitable for lifting material properties gas-tight surface smooth e. g. glass, plastic and ceramic plates, sheets metal, coated boards, gypsum plaster boards suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 2 carrying bar length approx. mm 1200 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg air pressure connection quick release coupling 9 mm Item No.: 7005-H2/E other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup H2E_GB.doc subject to changes 2/2

99 Venturi Device 7005-H3/E 1-circuit vacuum lifting device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve power failure monitoring system control vacuum meter on the device Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary Control Means air pressure ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 300 kg yellow / partly zinked 7005-H3E_GB.doc subject to changes 1/2

100 suitable for lifting material properties gas-tight surface smooth e. g. glass, plastic and ceramic plates, sheets metal, coated boards, gypsum plaster boards suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 3 safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg air pressure connection quick release coupling 9 mm Item No.: 7005-H3/E other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup H3E_GB.doc subject to changes 2/2

101 Venturi Device 7005-H1/E SO01 1-circuit vacuum lifting device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve power failure monitoring system control vacuum meter on the device different sizes of sponge rubber suction cups available Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary horizontal Control Means air pressure ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device Suspension: Safe Working Load: Colour: crane eye at the carrying frame 200 kg yellow / partly zinked 7005-H3ESO01_GB.doc subject to changes 1/2

102 suitable for lifting material properties gas-tight surface smooth e. g. plastic and ceramic plates, coated boards, metal sheets, checker plates, stone plates suction cup type 528 suction cup surface in action approx. mm 500 x 500 quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups 1 safe working load on smooth and clean surface at 60 % vacuum kg 200 dead weight approx. kg 28 air pressure connection quick release coupling 9 mm Item No.: 7005-H1/E SO01... other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup H3ESO01_GB.doc subject to changes 2/2

103 Accu-Device Kombi 7011-CSO For operation on EC construction sites only permissible with mechanical holding device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system the vacuum circuit has a vacuum tank with nonreturn valve, vacuum switch and control vacuum meter completely closed vacuum circuit prevents loss of vacuum at power failure warning lamp and acoustic signal indicate insufficient vacuum multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cups fixed with movable suspension directly to the cross carrying bar distance of suction cups can be adjusted all suction cups lockable individually guide bow holder for crane switch Vacuum Generation built-in low maintenance rechargeable battery vacuum pump (dry running system) for rechargeable battery and line operation without change-over built-in accumulator charger for charging over night no change of rechargeable battery necessary no cable - no hose horizontal Control Means ON/OFF directly at the device SUCTION/RELEASE via cable remote control optional via infrared remote control Suspension: Safe Working Load: Colour: 4-fold crane string 400 kg yellow / partly zinked 7011-CSO_GB.doc subject to changes 1/2

104 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups longitudinal carrying bar length approx. mm length of the cross carrying bars approx. mm number of the cross carrying bars safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg output 1.5 m³/h voltage charger for battery 230 Volt 50/60 Hz 1Ph Item No.: 7011-CSO voltage charger for battery 110 Volt 50/60 Hz 1Ph Item No.: 7011-CSO other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup 540 Item No.: DSFUS2 infrared remote control SUCTION/RELEASE Item No.: 7003-DSFUST infrared remote control SUCTION/RELEASE only outside the EC Also available as 2-circuit vacuum lifting device (Type 7211-CSO) in accordance to EN / pren CSO_GB.doc subject to changes 2/2

105 Venturi Device 7005-CSO/E 1-circuit vacuum lifting device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve power failure monitoring system control vacuum meter on the device multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cups fixed with movable suspension directly to the cross carrying bar distance of suction cups can be adjusted all suction cups lockable individually RELEASE-function with overpressure for short cycle intervals guide bow holder for crane switch Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary Control Means air pressure ON/OFF directly at the device SUCTION via a touch valve RELEASE via two touch valves horizontal Suspension: Safe Working Load: Colour: 4-fold crane string 400 kg yellow / partly zinked 7005-CSOE_GB.doc subject to changes 1/2

106 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type diameter in action approx. mm quality of suction cups black rubber abrasion possible up to 100 C heat resistant number of suction cups longitudinal carrying bar length approx. mm length of the cross carrying barsapprox. m number of the cross carrying bars safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg air pressure connection quick release coupling 9 mm Item No.: 7005-CSO/E other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Item No.: 540-SCHUTZ protection cap for suction cup 540 Also available as 2-circuit vacuum lifting device (Type 7205-CSO) in accordance to EN / pren CSOE_GB.doc subject to changes 2/2

107 Venturi Device 7005-C-H-1000/E 1-circuit vacuum lifting device according to EN for horizontal lifting and transporting Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve power failure monitoring system control vacuum meter on the device multiple row arrangement of suction cups cross carrying bars adjustable via cross clamps in longitudinal and vertical direction suction cups fixed with movable suspension directly to the cross carrying bar distance of suction cups can be adjusted all suction cups lockable individually RELEASE-function with overpressure for short cycle intervals guide bow holder for crane switch Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary Control Means air pressure ON/OFF directly at the device SUCTION via a touch valve RELEASE via two touch valves horizontal Suspension: Safe Working Load: Colour: crane eye at the carrying frame 1000 kg yellow / partly zinked 7005-C-H-1000E_GB.doc subject to changes 1/2

108 suitable for lifting material properties gas-tight surface smooth e. g. glass panes, plastic and ceramic plates, coated boards, metal sheets suction cup type 388 diameter in action approx. mm 300 quality of suction cups black rubber abrasion possible up to 100 C heat resistant length of carrying frame approx. mm longitudinal-carrying bar length max. approx. mm number of the cross carrying bars length of the cross carrying bars approx. mm number of suction cups safe working load on smooth and clean surface at 60 % vacuum kg dead weight approx. kg air pressure connection quick release coupling 9 mm Item No.: 7005-C-H other frame sizes on request Accessories on request Item No.: 388-SCHUTZ protection cap for suction cup 388 Also available as 2-circuit vacuum lifting device (Type 7205-C-H-1000) in accordance to EN / pren C-H-1000E_GB.doc subject to changes 2/2

109 Venturi Device 7005-SO98 1-Circuit Vacuum Lifting Device for the use outside the EC for horizontal lifting and transporting Description 1-circuit vacuum system completely closed vacuum circuit prevents loss of vacuum at compressed air failure vacuum tank with nonreturn valve control vacuum meter on the device Vacuum Generation via built-in suction jet (Venturi) for operation at least 6 bars compressed air are necessary with water separator with 40 l vacuum reserve for quick suction process and more safety at failure of the compressed air supply horizontal Control Means air pressure ON/OFF directly at the device SUCTION/RELEASE via hand valve at the device Suspension: Safe Working Load: Colour: 4-fold crane string 1000 kg yellow 7005-SO98_GB.doc subject to changes 1/2

110 suitable for lifting material properties gas-tight surface smooth, coarse e. g. metal sheets, metal ingots, stone plates, stone blocks etc. Area in action approx. mm 400 x 800 safe working load on smooth and clean surface at 60 % vacuum kg 1000 dead weight approx. kg air pressure connection 9 mm Item No.: 7005-SO98 other dimensions for the device on request Also available with a power failure monitoring system for the use within the EC SO98_GB.doc subject to changes 2/2

111 Vacuum Pump 7002-COMP in the crane rail Vacuum Pump 7002-COMP in the crane rail Frame 7000-A Kombi 7001-AS Manipulation Device 7025-MS Load testing of an individual suction cup Frame 7000-A Vacuum Lifting Units Servicing by the Specialist