Cattani Catalogue. Suction Compressors Plant solutions Suction system care Amalgam Retention CONTENTS

Transcription

1 Cattani Catalogue Valid January 31 to June 30, 2016 Suction Compressors Plant solutions Suction system care Amalgam Retention CONTENTS Prices and availability are subject to change without notice

2 Click on an item reference to navigate to that page. Return by clicking the CONTENTS button in the bottom corner of each page. Compressors Suction Systems cont. Suction Hose & Hose Terminals AC100 range 03 AC200 range 04 AC300 range 05 AC400 range 06 AC600 range 07 AC900 & AC AC1800 & AC Compressor Accessories 10 Plant Solutions VENTO 11 Blok Jet Silent 2 12 C.A.P.S. 13 Suction Systems Magnolia Turbo SMART B 16 Tandem SMART systems 17 Multiple Turbo SMARTs in parallel 18 Maxi SMART 19 Accessories for SMART suction systems 20 Turbo Jet Modular 21 Tip Supports 22 Mobile Suction Aspi Jet range 23 Dry Suction Systems Separators 24 Dry Suction Motors 25 Micro SMART 14 Disinfection 28 Turbo SMART A 15 Suction Tips & Adaptors 29 Hose Terminals 31 Suction Hose 32 Dust Extraction Packages 33 Components 34 Suction Motors 36 Service Kits SMART suction & Compressors 37 Spare Parts Filters, Connectors & Fittings, Drain Pumps 38 Tip Supports 43 Separators, Aspi Jet, Capacitors & PCBs 45 Suction Motors 50 Compressors 53 Change Over Reconditioned units 54 Cattani NZ price list - January 30 to June 30, 2016 Contents

3 COMPRESSORS - Oil free dry air AC 100 Range COMPRESSORS: Flow = 67.5 Nl/min at 5 bar Recommended for 1 surgery H = 720 mm W = 620 mm D = 460 mm 30 litre tank 240V, 3.8 A, 0.55 kw 70 db(a) Net weight = 47 kg K-AC1000 Technical data as above. Fitted with pre-filter moisture trap with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC100E 1 Surgery Oil Free, Dry air delivery All compressors are covered by a 7 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. AC Single Cylinder Compressor AC with dryer pre filter for humid climates AC 100Q - Quiet Single Cylinder Compressor Flow = 67.5 Nl/min at 5 bar Recommended for 1 surgery H = 860 mm W = 660 mm D = 600 mm 30 litre tank 240V, 3.8 A, 0.55 kw 63 db(a) Net weight = 57 kg K-AC100Q AC 100Q - with dryer pre filter for humid climates Technical data as above. Fitted with pre-filter moisture trap with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC100Q-E page 03

4 COMPRESSORS: AC Two Cylinder Compressor Flow = 160Nl/min at 5 bar Recommended for 2-3 surgeries H = 720 mm W = 620 mm D = 460 mm 30 litre tank 240V, 7.1 A, 1.25 kw 71 db(a) Net weight = 54 kg K-AC2000 Technical data as above. Fitted with pre-filter moisture trap with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC200E 2-3 Surgeries Oil Free, Dry air delivery All compressors are covered by a 7 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. AC with dryer pre filter for humid climates AC 200Q - Quiet Two Cylinder Compressor Flow = 160 Nl/min at 5 bar Recommended for 2-3 surgeries H = 860 mm W = 660 mm D = 600 mm 30 litre tank 240V, 7.1 A, 1.25 kw 63 db(a) Net weight = 63.5 kg K-AC200Q AC 200Q - with dryer pre filter for humid climates Technical data as above. Fitted with pre-filter moisture trap with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC200Q-E COMPRESSORS - Oil free dry air AC 200 Range page 04

5 COMPRESSORS - Oil free dry air AC 300 Range COMPRESSORS Flow = 238 Nl/min at 5 bar Recommended for 3-4 surgeries H = 750 mm W = 620 mm D = 520 mm 45 litre tank 240V, 9.2 A, 1.5 kw 73.6 db(a) Net weight = 64 kg K-AC3000 Technical data as above. Fitted with pre-filter moisture trap with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC300E 3-4 Surgeries Oil Free, Dry air delivery All compressors are covered by a 7 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. AC Three Cylinder Compressor AC with dryer pre filter for humid climates AC 300Q - Quiet Three Cylinder Compressor Flow = 238 Nl/min at 5 bar Recommended for 3-4 surgeries H = 970 mm W = 710 mm D = 700 mm 45 litre tank 240V, 10.2 A, 1.5 kw - 15 A circuit required 68 db(a) Net weight = 80 kg K-AC300Q AC 300Q - with dryer pre filter for humid climates Technical data as above. Fitted with pre-filter moisture trap with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC300Q-E page 05

6 COMPRESSORS Flow = 320Nl/min at 5 bar Recommended for 5-6 surgeries H = 745 mm W = 1155 mm D = 550 mm 100 litre tank 400V, 7.2 A, 3 kw (5-Pin socket with neutral rqd) Single Phase also available (K-AC4001-P) 240V, 15.4 A, 2.4 kw - 20A circuit rqd 73 db(a) Net weight = 112 kg K-AC4000/K-AC4001-P AC with dryer pre filters for humid climates Technical data as above. Fitted with pre-filter moisture traps with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC400E/K-AC4001-PE 5-6 Surgeries Oil Free, Dry air delivery All compressors are covered by a 7 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. AC Tandem Two Cylinder Compressor AC 400Q - Quiet Tandem Two Cylinder Compressor Flow = 320 Nl/min at 5 bar Recommended for 5-6 surgeries H = 890 mm W = 1160 mm D = 650 mm 100 litre tank 400V, 7.2 A, 3 kw (5-Pin socket with neutral rqd) Single Phase also available (K-AC400Q-1P) 240V, 15.4 A, 2.4 kw - 20A circuit rqd 63.8 db(a) Net weight = 135 kg K-AC400Q/K-AC400Q-1P (Indent Item) AC 400Q - with dryer pre filters for humid climates Technical data as above. Fitted with pre-filter moisture traps with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC400Q-E/K-AC400Q-1PE (Indent Item) COMPRESSORS - Oil free dry air AC 400 Range page 06

7 COMPRESSORS - Oil free dry air AC 600 Range COMPRESSORS Flow =476 Nl/min at 5 bar Recommended for 7-8 surgeries H = 890 mm W = 1320 mm D = 590 mm 150 litre tank 400V, 7.2 A, 3 kw (5-Pin socket with neutral rqd) 74 db(a) Net weight = 137 kg K-AC6000 Technical data as above. Fitted with pre-filter moisture traps with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC600E 7-8 Surgeries Oil Free, Dry air delivery All compressors are covered by a 7 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. AC Tandem Three Cylinder Compressor AC with dryer pre filters for humid climates AC 600Q - Quiet Tandem Three Cylinder Compressor Flow = 476 Nl/min at 5 bar Recommended for 7-8 surgeries H = 1040 mm W = 1320 mm D = 770 mm 150 litre tank 400V, 7.2 A, 3 kw (5-Pin socket with neutral rqd) 70.4 db(a) Net weight = 169 kg K-AC600Q (Indent Item) AC 600Q - with dryer pre filters for humid climates Technical data as above. Fitted with pre-filter moisture traps with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC600Q-E (Indent Item) page 07

8 COMPRESSORS AC Triple Three Cylinder Compressor Flow = 714 Nl/min at 5 bar Recommended for up to 12 surgeries H = 1000 mm W = 1800 mm D = 810 mm 300 litre tank 400V, 11.1 A, 4.5 kw (5-Pin socket with neutral rqd) 75 db(a) Net weight = 260 kg K-AC9000 AC with dryer pre filters for humid climates Technical data as above. Fitted with pre-filter moisture traps with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC900E up to 12 & 16 Surgeries Oil Free, Dry air delivery All compressors are covered by a 7 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. AC Tandem Six Cylinder Compressor Flow = 952 Nl/min at 5 bar Recommended for up to 16 surgeries H = 1100 mm W = 1800 mm D = 880 mm 300 litre tank 400V, 19.4 A, 9 kw (5-Pin socket with neutral rqd) 81 db(a) Net weight = 303 kg K-AC1200 AC with dryer pre filters for humid climates Technical data as above. Fitted with pre-filter moisture traps with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC1200-E COMPRESSORS - Oil free dry air AC 900 & AC 1200 page 08

9 COMPRESSORS - Oil free dry air AC 1800 & AC 2400 COMPRESSORS Flow =1,428 Nl/min at 5 bar Recommended for up to 24 surgeries H = 1100 mm W = 1800 mm D = 1100 mm 300 litre tank 400V, 29.1 A, 13.5 kw (5-Pin socket with neutral rqd) 82.5 db(a) Net weight = 394 kg K-AC1800 (Indent Item) Technical data as above. Fitted with pre-filter moisture traps with auto-drain that removes a percentage of moisture prior to air reaching the drying column. K-AC1800-E (Indent Item) up to 24 & 32 Surgeries Oil Free, Dry air delivery All compressors are covered by a 7 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. AC Triple Six Cylinder Compressor AC with dryer pre filters for humid climates AC Quad Six Cylinder Compressor Flow = 1,680 Nl/min at 5 bar Recommended for up to 32 surgeries H = 2100mm W = 1550mm D = 850mm 300 litre tank 400V, 46 A, 18 kw 83.5 db(a) Net weight = 300kg K-AC2400 (Indent Item) page 09

10 COMPRESSORS: Acoustic Cover for AC100, AC200 and AC300 H = 887 mm W = 870 mm D = 700 mm Accessories Reduces noise of compressors to: AC db(a) AC db(a) AC db(a) K Bacterial Filter for compressor Filter with effciency of % of 0.01 micron particles. Filter can be autoclaved up to 20 times. Can be easily retro-fitted to Cattani compressors. Filter is fitted into the top of the dryer. (1 filter required per desiccant dryer, therefore 2 filters required for AC400 and AC600 etc). K Dryer pre filter (for humid climates) kit for compressor Fitted between the condenser and the desiccant dryer, and removes a percentage of condensation from the air before reaching the dryer. Can be easily retro-fitted to existing compressors. (1 filter required per desiccant dryer, therefore 2 filters required for AC400 and AC600 etc). K-E10000 Ventilation kits Recommendations m3/h for each kw of equipment installed. 250 & 500 kits include fan, ducting and vent cover. 800 includes fan only. L-TD2500-KIT: L-TD : L-TD8000: 250 m3/h 500 m3/h: 800 m3/h: COMPRESSORS - Oil free dry air Compressor Accessories page 10

11 PLANT SOLUTIONS Vento Vento VENTO solves the problem of limited space for plant room equipment, by having the compressor above the suction unit, thus greatly reducing the floor space required. Please refer to compressor and suction pages for each unit s specification data. Smart Vento Duo - TANDEM Smart Vento Trio AC300 Compressor & Turbo SMART B with Hydrocyclone Recommended for 3-4 Surgeries H = 1460 mm W = 700 mm D = 540 mm C-VC2A30 CUSTOM CONFIGURATIONS Our range of standard configuration VENTO units are listed here, however, custom configurations with different combinations of compressor and Turbo SMART can be produced upon request. Please contact us for further information. QUIET COMPRESSORS with ACOUSTIC hoods All of the listed units are available with the Q series of compressors (compressors with acoustic hoods). The price difference of the VENTO unit with Q compressor is the price difference between the standard and Q compressor. SPECIFICATIONS Please refer to compressor and suction pages for individual unit specifications. Smart Vento Duo - TANDEM AC400 Compressor & Tandem Turbo SMART A with Hydrocyclone Recommended for 5 Surgeries H = 1450 mm W = 1155 mm D = 550 mm 3-phase outlet (5-pin, 10A) rqd for AC400 & 2 x 10A single phase outlets rqd for Turbo SMARTs C-VTC1A4 Smart Vento Duo AC200 Compressor & Turbo SMART A with Hydrocyclone Recommended for 2-3 Surgeries H = 1400 mm W = 700 mm D = 540 mm C-VC1A20 Smart Vento Trio - TANDEM AC600 Compressor & Tandem Turbo SMART B with Hydrocyclone Recommended for up to 8 Surgeries H = 1590 mm W = 1320 mm D = 590 mm 3-phase outlet (5-pin, 10A) rqd for AC600 & 2 x 10A single phase outlets rqd for Turbo SMARTs C-VTC2A5 page 11

12 BLOK - JET Silent 2 Simple to design into a clinic with its small footprint and low noise. Must be installed inside the Clinic, with an ambient temperature no greater than 28 o C. Requires 2 x 10 Amp Single Phases power supplies. Please refer to compressor and suction pages for each unit s specification data. INDOOR PLANT ROOM SOLUTION The one enclosure cabinet houses suction and compressed air system for a 3-4 surgery application. It is designed to be installed inside the clinic, with it s small footprint and low noise level which makes incorporating it into a clinic as simple as possible. The unit is fitted with lockable castor wheels for easy positioning and servicing and lockable doors for security. External display panel shows compressor and suction status. SPECIFICATIONS Please refer to compressor and suction pages for individual unit specifications. page 12 BLOK - JET Silent 2 AC300 Compressor & Turbo SMART B with Hydrocyclone Recommended for 3-4 Surgeries H = 1935 mm W = 760 mm D = 650 mm 54 db(a) Net weight = 270 kg C-BJS400 PLANT SOLUTIONS BLOK - JET Silent 2

13 PLANT SOLUTIONS Controlled Atmosphere Protection System C.A.P.S. - Controlled Atmosphere Protection System. Designed as a stand alone outdoor plant room enclosure. Sealed, lockable, weatherproof, air conditioned, sound and heat insulated. C.A.P.S. AC200 Compressor & Turbo SMART A with Hydrocyclone Recommended for 2-3 Surgeries H = 1265 mm W = 1785 mm D = 900 mm C-CAPS1A OUTDOOR PLANT ROOM SOLUTION The one enclosure cabinet houses suction and compressed air system for either a 2 surgery or 3-4 surgery application. It is designed to be installed outside the clinic. FEATURES: pre-installed split system air conditioner lockable lid & doors powder coated steel structure gas strut assisted lid & bi-fold doors for easy service access adjustable feet for easy levelling during installation internal light smoke detector pre-cut holes (left & right) for services installation power points installed into a bulk head ready for electrician to fit off C.A.P.S. AC300 Compressor & Turbo SMART B with Hydrocyclone Recommended for 3-4 Surgeries H = 1265 mm W = 1785 mm D = 900 mm C-CAPS2A page 13

14 Micro SMART: 1-2 Surgeries Inverter controlled for effcient performance. Can be simply connected in parallel to increase capacity and/or to include redundancy. SMART systems should be installed in a ventilated area, with an ambient temperature no greater than 35 o C. All SMART systems are covered by a 3 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. Micro SMART with ISO 6 Hydrocyclone Inverter control Max. flow = 916 l/min Max vacuum for continuous duty = 210 mbar Recommended for 1-2 Surgeries H = 600 mm W = 380 mm D = 350 mm 6.3 A, 1.3 kw db(a) - see accessories for reduction options Net weight = 23 kg Fitted with ISO 6 Hydrocyclone Amalgam Retention ISO Compliant Max Flow = 5.5 l/min Min Flow = 0.5 l/min C-Mh0000 ISO 6 Hydrocyclone Retro Fit Kit Amalgam Retention for Micro SMART Designed for used with Micro SMART Does not require any additional space Integrates into the same dimensions of the unit ISO Compliant Max Flow = 5.5 l/min Min Flow = 0.5 l/min C-MR6000 Accessories for SMART suction systems can be found on page 20 SUCTION SYSTEMS Micro SMART page 14

15 SALE DEPT. FAX: PURCHASING DEPT. FAX: ACCOUNTING DEPT. FAX : INFO@CATTANI.IT CODICE FISCALE E PARTITA I.V.A E.E.C. VAT IT CAPITALE SOCIALE ,00 I.V. - R.E.A REGISTRO IMPRESE PARMA N SUCTION SYSTEMS Turbo SMART A Turbo SMART A: 2-3 Surgeries (can be upgraded to 4 Surgeries at a later date) Inverter controlled for effcient performance. Can be simply connected in parallel to increase capacity and/or to include redundancy. SMART systems should be installed in a ventilated area, with an ambient temperature no greater than 35 o C. All SMART systems are covered by a 3 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. Turbo SMART A with ISO 18 Hydrocyclone Inverter control Max. flow = 1,430 l/min Max vacuum for continuous duty = 210 mbar Recommended for 2 Surgeries (can be upgraded to a 4 surgery unit with password purchase.) H = 645 mm W = 400 mm D = 330 mm 7 A, 1.45 kw 69 db(a) Net weight = 39.6 kg Fitted with ISO 18 Hydrocyclone Amalgam Retention ISO Compliant Max Flow = 18 l/min Min Flow = 0.5 l/min C-1A0000 Password - Upgrade Turbo SMART A to Turbo SMART B Simply installed by entering via the unit s keypad Requirements for order: Serial Number - found on I.D. label on chassis Generated Code - found on label on control panel C-P00000 CATTANI S.P.A. VIA NATTA, 6/A PARMA ITALY TEL Accessories for SMART suction systems can be found on page 20 page 15

16 Turbo SMART B: up to 4 Surgeries Inverter controlled for effcient performance. Can be simply connected in parallel to increase capacity and/or to include redundancy. SMART systems should be installed in a ventilated area, with an ambient temperature no greater than 35 o C. All SMART systems are covered by a 3 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. Turbo SMART B with ISO 18 Hydrocyclone Inverter control Max. flow = 1,750 l/min Max vacuum for continuous duty = 210 mbar Recommended for up to 4 Surgeries H = 645 mm W = 400 mm D = 330 mm 9 A, 1.87 kw 73.7 db(a) Net weight = 39.5 kg Fitted with ISO 18 Hydrocyclone Amalgam Retention ISO Compliant Max Flow = 18 l/min Min Flow = 0.5 l/min C-2A0000 ISO 18 Hydrocyclone Retro Fit Kit Amalgam Retention for Turbo SMART Designed for used with Turbo SMART A or B Does not require any additional space Integrates into the same dimensions of the unit ISO Compliant Max Flow = 18 l/min Min Flow = 0.5 l/min C-1h0000 Accessories for SMART suction systems can be found on page 20 SUCTION SYSTEMS Turbo SMART B page 16

17 SUCTION SYSTEMS Tandem SMART Systems Tandem SMART Systems: up to 4, 5 & 8 Surgeries Inverter controlled for effcient performance. Packaged for easy installation - includes mounting cradle and manifolding. Built in redundancy. SMART systems should be installed in a ventilated area, with an ambient temperature no greater than 35 o C. All SMART systems are covered by a 3 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. Tandem Micro SMART with ISO 6 Hydrocyclones Inverter control Total Max. flow = 1,824 l/min Max vacuum for continuous duty = 210 mbar Recommended for up to 4 Surgeries H = 600 mm W = 1030 mm D = 640 mm 2 x 6.3 A, 1.3 kw (2 x 10 A power outlets rqd) db(a) - see accessories for reduction options Net weight = 50 kg C-MhTM00 Tandem Turbo SMART A with ISO 18 Hydrocyclones Inverter control Max. flow = 2,860 l/min Max vacuum for continuous duty = 210 mbar Recommended for 5 Surgeries (can be upgraded to 2 x 4 surgery units. See accessories page for details.) H = 740 mm W = 1250 mm D = 760 mm 2 x 7 A, 1.45 kw (2 x 10 A power outlets rqd) 72 db(a) Net weight = 85 kg C-1ATM00 Accessories for SMART suction systems can be found on page 20 Tandem Turbo SMART B with ISO 18 Hydrocyclone Inverter control Max. flow = 3,500 l/min Max vacuum for continuous duty = 210 mbar Recommended for up to 8 Surgeries H = 740 mm W = 1250 mm D = 760 mm 2 x 9 A, 1.87 kw (2 x 10 A power outlets rqd) 76.7 db(a) Net weight = 85 kg C-2ATM00 page 17

18 Multi SMART Systems: up to 12, 16 & 20 Surgeries Inverter controlled for effcient performance. Packaged for easy installation - includes vertical rack with small footprint with lockable castor wheels, header tank and manifolding. Built in redundancy. SMART systems should be installed in a ventilated area, with an ambient temperature no greater than 35 o C. All SMART systems are covered by a 3 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. Multi SMART T3 with ISO 18 Hydrocyclones Inverter control Max. flow = 5,100 l/min Max vacuum for continuous duty = 210 mbar Recommended for up to 12 Surgeries H = 1660 mm W = 1000 mm D = 750 mm 3 x 9 A, 1.87 kw (3 power outlets rqd) Approx db(a) Net weight = 148 kg C-2A3V00 Multi SMART T4 with ISO 18 Hydrocyclones Inverter control Max. flow = 6,800 l/min Max vacuum for continuous duty = 210 mbar Recommended for up to 16 Surgeries H = 1660 mm W = 1300 mm D = 750 mm 4 x 9 A, 1.87 kw (4 power outlets rqd) Approx db(a) Net weight = 184 kg C-2A4V00 Accessories for SMART suction systems can be found on page 20 Multi SMART T5 with ISO 18 Hydrocyclones Inverter control Max. flow = 8,500 l/min Max vacuum for continuous duty = 210 mbar Recommended for up to 20 Surgeries H = 1660 mm W = 1600 mm D = 750 mm 5 x 9 A, 1.87 kw (5 power outlets rqd) Approx db(a) Net weight = 220 kg C-2A5V00 SUCTION SYSTEMS Multi SMART Systems page 18

19 SUCTION SYSTEMS Maxi SMART Systems Maxi SMART: Systems for 20 + Surgeries Inverter controlled for effcient performance. Can be simply connected in parallel to increase capacity and/or to include redundancy. SMART systems should be installed in a ventilated area, with an ambient temperature no greater than 35 o C. All SMART systems are covered by a 3 YEAR WARRANTY - refer to the Cattani Warranty Statement for details. Each Maxi SMART unit is capable of providing suction for 12 surgeries if the unit is intalled on the same floor level as the dental chairs, or 15 surgeries if the unit is installed at a level lower than the dental chairs. HOWEVER, Maxi SMART is intended as a system to be connected in parallel, for example: 2 x Maxi SMART connected in parallel: for up to 30 surgeries (or 24 at the same level) 3 x Maxi SMART connected in parallel: for up to 45 surgeries (or 36 at the same level) 4 x Maxi SMART connected in parallel: for up to 60 surgeries (or 48 at the same level). Maxi SMART without Acoustic Covers Inverter control with flow target Max. flow = 5,000 l/min Max vacuum for continuous duty = 240 mbar Recommended for Surgeries (see side bar) H = 1490 mm W = 708 mm D = 1037 mm 25 A, 11.8 kw 77 db(a) Net weight = 215 kg Fitted with ISO 60 Hydrocyclone Amalgam Retention ISO Compliant Max Flow = 55 l/min Min Flow = 1.0 l/min C-3A0000 Maxi SMART with Acoustic Covers Inverter control with flow target Max. flow = 5,000 l/min Max vacuum for continuous duty = 240 mbar Recommended for Surgeries (see side bar) H = 1490 mm W = 708 mm D = 1074 mm 25 A, 11.8 kw 68 db(a) Net weight = 270 kg Fitted with ISO 60 Hydrocyclone Amalgam Retention ISO Compliant Max Flow = 55 l/min Min Flow = 1.0 l/min C-3AAC00 page 19

20 Sound reduction covers for SMART suction systems C-CM0000 Plastic cover for Micro SMART suction motor only. Reduces the noise level to 63 db(a) db(a) at speeds 60Hz - 120Hz. Plastic cover for Turbo Smart (all models). Reduces noise level by approximately 0.9 db(a). Both can be retro-fitted to existing units. Micro = C-CM0000 C-CM0000 C-C00000 Air Injector Valves C-1AIV00 EP Suction Isolation Valve 24V isolation valve, for use with all types of suction systems. Dimensions: H = 68mm W = 85mm D = 70mm C-0039C0 C-0039C0 C-0039C0-4 HEPA H14 Filter Surgeries 4 pack - C-0039C0-4 HEPA H14 Filter (90 m3/h). 65mm port connections. Mounting hardware supplied. Diameter = 200mm Height = 230mm (plus port protrusion). C Cartridge - C C C Turbo = C-C00000 Designed to be installed at the end of the suction line. Allows air to enter the suction line when it is working at a closed head, keeping fluids flowing. 2 styles available. Std = C-1AIV00 C-1AIV00 C-AAIV00 Automatic = C-AAIV00 Replacement Amalgam Containers for SMART suction systems Conversion Switch Box page 20 C CMA ECOCYLE are Cattani s recycling partner. Please contact them for pricing on replacement containers, pick up and recycling services. 24V power supply to convert the SMART s 2 wire switching system into a 3 wire system i.e. to provide 24V power to isolation & spittoon drain valves. 30 VA (1.25 Amp). Please ensure that valves that are being powered by this panel do not exceed this rating. Higher powered units available upon request. D-RZ0000 Spittoon Drain Valves C Alarm Panel D-RA Automatic valve that connects the spittoon waste to the suction system. Requires 24V AD/DC supply. Valve is activated when fluid is sensed by the electronic level sensing probes. Valve also activates suction system if not already running. Post Box - C Universal - C C C Panel to be installed in hi-vis area (i.e. reception). Lamp/s illuminate when when there is an alarm on the SMART suction system. Includes power supply for lamps and mounting plate. Highly recommended for SMART units installed in parallel. 1 lamp - D-RA lamp - D-RA2000 D-RA1000 D-RA2000 SUCTION SYSTEMS Accessories for SMART Suction Systems

21 SUCTION SYSTEMS SMART CUBE Range SMART CUBE Range: Micro SMART CUBE Turbo SMART CUBE COMING SOON page 21

22 Tip Supports Clinic staff should be made aware that some cleaning products can damage plastic components and cause them to become brittle and crack. We recommend only the use of Eco-Jet & Puli-Jet Gentle with these units. Manual Tip Support C-0011BG Three hose hanger with manual closure of terminals. Dimensions (w/o hoses or terminals): H = 126mm W = 180mm D = 85mm Black Side Entry (C-0011A0) For rear entry connection (inc filter) - Blk (C-0011B0) Grey (C-0011BG) C-0011A0/C-0011B0/C-0011BG Pneumatic Tip Support with triplex holder C-5528G0 Saliva Ejector holder Two hose hanger with automatic closure of terminals and triplex holder. Dimensions (w/o hoses or terminals): H = 118mm W = 148mm D = 105mm Black (C ) Grey (C-5528G0) White (C-5528W0) C /C-5528G0/C-5528w0 Able to be cabinet mounted or to the side of the Pneumatic Tip Support. Includes a micro switch & a range of reducers for different sized hoses. Black (C ) Grey (C-0070G0) White (C-0070W0) C /C-0070G0/C-0070w0 page 22 Pneumatic Tip Support C-0055G0 Triplex Syringe holder C-A0028G C-0070G0 C Extension segment arms Two hose hanger with automatic pneumatic closure of terminals. Dimensions (w/o) hoses or terminals): H = 118mm W = 135mm D = 105mm Black (C ) Grey (C-0055G0) White (C-0055W0) C /C-0055G0/C-0055w0 Able to be cabinet mounted or to the side of the Pneumatic Tip Support. Includes a range of reducers for different sized syringes. Black (C-A0028B) Grey (C-A0028G) White (C-A0028W) C-A0028B/C-A0028G/C-A0028w Extension arm for tip supports (available for both Manual & Pneumatic versions). Extension lengths do not include the tip support depth. Single arm extends - Min length = 50mm Max length = 270mm C Two segment arm extends - Min length = 50mm Max length = 470mm C DRY SUCTION SYSTEMS Tip Supports

23 MOBILE SUCTION Aspi Jet Range Mobile Suction: Aspi Jet The Aspi Jet 6 is an ideal back-up suction unit. The Aspi Jet is a good option where it is diffcult to get plumbing to the dental unit. Aspi Jet 6 Manual drain 4 litre canister capacity H = 750mm W = 325mm D = 420mm 60 db(a) C Aspi Jet 8 Aspi Jet 9 Automatic drain pump & cup filler Requires plumbing to waste Requires a water supply H = 750mm W = 325mm D = 420mm 60 db(a) C (Indent Item) Automatic drain pump, cup filler and spittoon Requires plumbing to waste Requires a water & air supply H = 750mm W = 325mm D = 520mm 60 db(a) C (Indent Item) page 23 Aspi Jet 7 Automatic drain pump Requires plumbing to waste H = 750mm W = 325mm D = 420mm 60 db(a) C Bacterial Filter for Aspi Jet 6 Removes bacterial & viral particles down to micron Filter should be replaced approx. every 6 months H = 225 mm Diameter = 140 mm C-E11024

24 Dry suction systems: Separators Cattani dry separators are designed for installation close to the dental unit All separators are covered by a 12 MONTH WARRANTY - refer to the Cattani Warranty Statement for details. Continuous Suction Separator Level sensing probes activate drain pump whilst suction is active Requires 24V supply voltage Multi Surgery with bracket Single Surgery with bracket Multi Surgery components only C-0016A0 C-0016B0 C-0016AB page 24 Continuous Suction Separator in Cover Level sensing probes activate drain pump whilst suction is active Mounted in a metal case with a plastic front cover Requires 24V supply voltage Multi Surgery Single Surgery C-0016C0 C-0016D0 DRY SUCTION SYSTEMS Separators

25 DRY SUCTION SYSTEMS Dry Suction Motors Uni Jet 75 - for 1 surgery Max Vacuum for continuous operation = 130 mbar H = 275 mm W = 232 mm D = 246 mm Single phase A kw 62 db(a) Must be fitted with motor overload or warranty may be void C Tecno Jet - for up to 3 surgeries Max Vacuum for continuous operation = 140 mbar H = 320 mm W = 310 mm D = 310 mm Single phase A kw 64 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C Flux Jet - for up to 4 surgeries Max Vacuum for continuous operation = 150 mbar H = 350 mm W = 340 mm D = 410 mm Single phase A kw 68.5 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C Medio Jet (3-phase only) - for up to 7 surgeries Max Vacuum for continuous operation = 175 mbar H = 420 mm W = 400 mm D = 335 mm 3 phase A kw 76 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C-A00150 Uni Jet 75 2V - for 1 surgery Max Vacuum for continuous operation = 270 mbar H = 275 mm W = 246 mm D = 491 mm Single phase A kw 64 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C-0023V0 Tecno Jet 2V - for up to 3 surgeries Max Vacuum for continuous operation = 235 mbar H = 320 mm W = 310 mm D = 550 mm Single phase A kw 65 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C-0069V0 Flux Jet 2V (3-phase only) - for up to 4 surgeries Max Vacuum for continuous operation = 230 mbar H = 350 mm W = 340 mm D = 590 mm 3 phase A kw 72 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C-014V00 Medio Jet 2V (3-phase only) - for up to 7 surgeries Max Vacuum for continuous operation = 245 mbar H = 420 mm W = 400 mm D = 705 mm 3 phase A kw 77 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C-A0015V page 25

26 Uni Jet 75 in cover - for 1 surgery Max Vacuum for continuous operation = 130 mbar H = 330 mm W = 320 mm D = 280 mm Single phase A kw 58 db(a) Must be fitted with motor overload or warranty may be void C Control Panels for suction motors including thermal overload Includes off delay timer to avoid rapid stop/starting of the motor H = 400 mm W = 300 mm D = 170 mm For Uni Jet (single phase) C For Tecno Jet (single phase) C For Flux Jet (single phase) C For all 3 phase models C Uni Jet 75 in cover including control - for 1 surgery Vacuum Relief Valves Max Vacuum for continuous operation = 130 mbar H = 330 mm W = 320 mm D = 280 mm Single phase A kw 58 db(a) C Limits Max Vacuum so as not to overload the suction motor For Tecno Jet C-A31080 For Flux Jet C For Flux Jet 2V - also opens thermally if unit overheats C For Medio Jet C-A15490 For Medio Jet 2V C-A1549V DRY SUCTION SYSTEMS Dry Suction Motors and Accessories page 26

27 DRY SUCTION SYSTEMS Silencers and hepa Filters Dry Suction Systems: Silencer for Uni Jet Reduces noise by approx. 2 db(a) L = 400 mm Diameter = 80 mm 30mm ports C Silencer for Tecno Jet & Flux Jet Silencer for Medio Jet Reduces noise by approx. 2 db(a) L = 440 mm Diameter = 160 mm 50mm ports C Reduces noise by approx. 2 db(a) L = 265 mm Diameter = 90 mm 50mm ports C-S2S000 Silencers and HEPA Filters page 27 Bacterial Filter for Uni Jet Removes bacterial & viral particles down to 0.01 micron Filter should be replaced approx. every 6 months Can reduce suction performance H = 225 mm Diameter = 140 mm C-E11024 HEPA H14 Filter Surgeries HEPA H14 Filter (90 m3/h) H = 230 mm Diameter = 200 mm (plus port protrusion) 65mm port connections. C HEPA H14 Filter Surgeries C replacement cartridge HEPA H14 Filter (188 m3/h) H = 460 mm Diameter = 200 mm (plus port protrusion) 65mm port connections. C C replacement cartridge

28 Suction Care Products: Disinfection Consumable products recommended for Cattani Suction Systems Puli-Jet Gentle Disinfectant Pulse Cleaner Commercial grade disinfectant designed for semi- wet, wet and dry suction systems. 1 ltr makes 33 doses (30ml of Puli-Jet Gentle to 2.5 ltrs of warm water). Available in 1 ltr bottles. Item Code Qty M single M pk M pk M pk Used to automatically aspirate disinfectant through the suction system. It aspirates air and fluids to create turbulance for effective disinfection. Item Code Qty C single C pk C pk Eco-Jet 1 Spray ml Eco-Jet 1 is a commercial grade disinfectant with a low alcohol content and pleasant odour. Item Code Qty M single M pk M pk M pk Antifoaming disinfectant tablets Reduces foam in suction systems created by blood and mucus, as well as releasing a disinfectant throughout the working day. Recommended to use one tablet per surgery, per day. Each single pack contains 50 tablets. Item Code Qty M single M pk Lubri-Jet Silicone Lubricant Drops Eco-Jet 1 - Refill 5 lt Silicone based lubricant in a handy dropper bottle. Ideal for lubricating rubber o-rings. Each single pack contains 4 bottles. Item Code Qty M Eco-Jet 1 is a commercial grade disinfectant with a low alcohol content and pleasant odour. 5 lt refill bottle for Eco-Jet Spray. Item Code Qty M single M pk SUCTION CARE PRODUCTS Disinfection page 28

29 Suction Tips and Adaptors Suction Tips and Adaptors are autoclavable to 135 o C High Volume Evacuator (HVE) Tip #20 High Volume Evacuator (HVE) Tip #17 HVE suction tip (to fit 17mm hose terminal) for high volume air flow to evacuate water sprays and airborne particles before they can escape the oral cavity. Each single pack contains 3 suction tips. Item Code C-T20000 C-T20X00 C-T20X68 Qty single 34 pk 68 pk HVE suction tip (to fit 11mm hose terminal) for high volume air flow to evacuate water sprays and airborne particles before they can escape the oral cavity. Each single pack contains 3 suction tips. Item Code C-T17000 C-T17X00 C-T17X68 Qty single 34 pk 68 pk High Volume Evacuator (HVE) Tip #22 Surgical Suction Tip #21 SUCTION TIPS and ADAPTORS HVE suction tip (to fit 17mm hose terminal) for high volume air flow to evacuate water sprays and airborne particles before they can escape the oral cavity. Each single pack contains 3 suction tips. Item Code C-T22000 C-T22X00 C-T22X68 Qty single 34 pk 68 pk High Volume Evacuator (HVE) Tip #11 HVE suction tip (to fit 17mm hose terminal) for high volume air flow to evacuate water sprays and airborne particles before they can escape the oral cavity. Each single pack contains 3 suction tips. Item Code C-T11000 C-T11X00 C-T11X68 Qty single 34 pk 68 pk Surgical tip (to fit 11mm hose terminal) with smaller diameter for more precise evacuation of fluids from the oral cavity. Each single pack contains 3 suction tips. Item Code C-T21000 C-T21X00 C-T21X68 Surgical Suction Tip #9 Qty single 34 pk 68 pk Surgical tip (to fit 11mm hose terminal) with smaller diameter for more precise evacuation of fluids from the oral cavity. Each single pack contains 3 suction tips. Item Code C-T90000 C-T9X000 C-T9X680 Qty single 34 pk 68 pk page 29

30 Suction Tips and Adaptors Suction Tips and Adaptors are autoclavable to 135 o C Funnel spittoon Fits into either the 11mm or 17mm hose terminal. Item Code Qty C single C pk Cleaning brush - Large Designed for scrubbing the internal surface of large suction tips prior to autoclaving. Item Code Qty C single C pk SUCTION TIPS and ADAPTORS Adaptor for saliva ejector Cleaning brush - Small Adapts most saliva ejector tips to either the 11mm or 17mm hose terminal. Designed for scrubbing the internal surface of small suction tips prior to autoclaving. Item Code Qty C single C pk Item Code Qty C single C pk Reducer Reduces the internal bore diametre of the 17mm hose terminal to 11mm for fitment of 11mm suction tips. Item Code Qty C single C pk page 30

31 Suction Hose and Hose Terminals Hose Terminals are autoclavable to 135 o C Suction hose is NOT autoclavable. Hose terminal - Large - 17mm Suction hose, terminal & hose end connector - Large - 17mm C-11014G Item Code Qty Colour C single black C pk black C-11014G single grey C-11014G pk grey C-11014W single white C-11014W pk white C-11017S-00G 1.5m length of suction hose with terminal and hose end. Available in silicone or spiral hose. Item Code Type Colour C spiral black C-11017G spiral grey C-11017B silicone black C-11017S-00G silicone grey Hose terminal - Small - 11mm Suction hose, terminal & hose end connector - Small - 11mm SUCTION hose and hose TERMINALS C-11015G Item Code Qty Colour C single black C pk black C-11015G single grey C-11015G pk grey C-11015W single white C-11015W pk white Slide closer for hose terminal Internal slide for hose terminal. One colour for all hose terminals. Item Code C-11014F C-11015F Size 17mm 11mm C-11018S-00G Hose end connector 1.5m length of suction hose with terminal and hose end. Available in silicone or spiral hose. Item Code Type Colour C spiral black C-11018G spiral grey C-11018B silicone black C-11018S-00G silicone grey Item Code Size Colour C mm black C mm grey C mm white C mm black C mm grey C mm white page 31

32 Suction Hose NOTE: If a 25m roll is required, please add FR to end of the item code. Silicone Hose Item Code Size Colour C-11012B 17mm black C-11012S-00G 17mm grey C-11012W 17mm white C-11013B 11mm black C-11013S-00G 11mm grey C-11013W 11mm white 25m roll any any Spiral Hose - large sizes Item Code Size Colour C-H mm black C-H40G00 40mm grey 25m roll 40mm any C-H mm grey C-H mm black C-H mm black SUCTION TIPS and ADAPTORS Spiral Hose - small sizes Item Code Size Colour C mm black C-11012G 17mm grey C mm black C-11013G 11mm grey C-H mm black C-H14G00 14mm grey 25m roll any any Heat Resistant Hose for suction or exhaust air Semi-flexible, heavy duty hose which is capable of withstanding high exhaust air temperatures. Item Code Size Colour C-H40HR0 40mm black C-H50HR0 50mm black C-H60HR0 60mm black Spiral Hose - medium sizes Item Code Size Colour C-H mm black C-H20G00 20mm grey C-H mm black C-H25G00 25mm grey C-H mm black C-H30G00 30mm grey 25m roll any any Heat Resistant Hose for exhaust air only Flexible hose which is capable of withstanding high exhaust air temperatures. Item Code Size Colour C-H30EHR 30mm black C-H40EHR 40mm black C-H50EHR 50mm black page 32

33 DUST EXTRACTION Packages Dust Extraction: Packages The dust extraction kits are for small to medium sized labs, and are supplied with short lengths of flexible suction hose to connect components to PVC pipe work system, which should be installed betwen the suction motor and dust extraction points. All kits are supplied with a manual motor starter, which includes thermal overload protection. The motor starter has an on-off switch which can be used to activate and deactivate the suction motor. There are 4 different sized kits available (each with a different capacity suction motor), which are listed below. For each sized kit, there are three different options of extraction point: a1 - Standard Work Peg a2 - High Flow Work Peg (with adjustable height) a3 - Telescopic Arm Single point kit - with suction motor at MAX 3-4 m distance Includes: 1 x Uni Jet suction motor, 1 x dust filter bag (40mm ports), 1 x thermal overload and 2m of flexible suction hose. Kit with 1 x a1 - standard work peg C-DA0000 Kit with 1 x a2 - high flow work peg C-DB0000 Kit with 1 x a3 - telescopic arm C-DC0000 Single point kit - with suction motor at MAX 8-10 m distance Includes: 1 x Tecno Jet suction motor, relief valve, 1 x dust filter bag (40mm ports), 1 x thermal overload and 2m of flexible suction. Kit with 1 x a1 - standard work peg C-D1A000 Kit wtih 1 x a2 - high flow work peg C-D1B000 Kit with 1 x a3 - telescopic arm C-D1C000 a1 a2 a3 2 point kit Includes: 1 x Flux Jet suction motor, relief valve, 2 x dust filter bags (50mm ports), 1 x thermal overload and 4m of flexible suction hose. Kit with 2 x a1 - standard work pegs C-D2A000 Kit with 2 x a2 - high flow work pegs C-D2B000 Kit with 2 x a3 - telescopic arms C-D2C000 3 point kit - 3 phase only Includes: 1 x Medio Jet suction motor (3 phase), relief valve, 3 x dust filter bag (50mm ports), 1 x thermal overload, and 6m of flexible suction hose. Kit with 3 x a1 - standard work pegs C-D3A000 Kit with 3 x a2 - high flow work pegs C-D3B000 Kit with 3 x a3 - telescopic arms C-D3C000 page 33

34 Dust Extraction: Components Standard Work peg extraction point Consists of work peg and transparent shell. Supplied with bracket for mounting to bench. 30mm port connection. C-A01350 High flow work peg extraction point Consists of adjustable height work peg, 2 interchangeable covers and bracket for mounting to bench. 40mm port connection. C-A01340 Telescopic arm extraction point Consists of 360o swivel bench mount, 2 forked articulations, telescopic tube, transparent hood and blanking plug. 30mm port connection. C-A01380 Dust filter bag container page 34 Houses replaceable dust filter bag with indicator for full or blocked bag. Includes mounting bracket. Available with following port sizes: 30 mm (C-A01360) 40 mm (C-A01370) 50 mm (C-A01375) C-A01360/C-A01370/C-A01375 Motorised suction isolation valve for dust extraction Arm rests Suction isolation valve operates on 24 V. Requires a connection to a switch to open and close the valve to the suction line according to user demand. C-12020D Firm rubber arm rests that insert into under-bench mounts which are supplied C-A Short C-A Long DUST EXTRACTION Components

35 DUST EXTRACTION Components Dust Extraction: Components Dust Separators require a compressed air connection for the automatic pneumatic cleaning function. Dust Separators require suction motor/s and control panel for a complete central system. Dust Extraction Sheild Kit E D F C-A01630 Dust Separator for 7 points Dust collects in a disposable plastic bag in the base of the separator, which unclips & drops out for access to change the bag when full. Max air fllow = 700 m3/h (11,670 l/min) Auto pneumatic filter cleaning (compressed air supply rqd) H = 1275 mm W = 505 mm D = 590 C SMART Dust Extractor for 4 points 2 suction motors with inverter control Max. flow = 360 m3/h (6,000 l/min) H = 950 mm W = 1000 mm D = 950 mm Auto pneumatic filter cleaning (compressed air supply rqd) 5.8 A, 1.3 kw 65.6 db(a) Net weight = 100 kg C Dust Separator for 4 points Dust collects in a disposable plastic bag in the base of the separator, which unclips & drops out for access to change the bag when full. Max air fllow = 200 m3/h (3,300 l/min) Auto pneumatic filter cleaning (compressed air supply rqd) H = 900 mm W = 580 mm D = 550 C Dust Separator for 14 points Dust collects in a disposable plastic bag in the base of the separator, which unclips & drops out for access to change the bag when full. Max air fllow = 1,500 m3/h (25,000 l/min) Auto pneumatic filter cleaning (compressed air supply rqd) H = 1950 mm W = 650 mm D = 700 C page 35

36 Dust Extraction: Suction Motors Suction motors must be fitted with appropriate vacuum relief valve and motor over load protection or warranty may be void. Uni Jet 75 Tecno Jet Flux Jet Max flow 1,250 l/min for 1 work position fitted max 3-4 metres away H = 275 mm W = 232 mm D = 246 mm Single phase A kw 62 db(a) Must be fitted with motor overload or warranty may be void C Max flow 2,000 l/min for one work position fitted 8-10 metres away H = 320 mm W = 310 mm D = 310 mm Single phase A kw 68 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C Max flow 3,300 l/min for 3 work positions H = 350 mm W = 340 mm D = 410 mm Single phase A kw 68.5 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C Medio Jet (3 phase only) Uni Jet 500 (3 phase only) page 36 Max flow 9,500 l/min for up to 6 work positions H = 585 mm W = 530 mm D = 530 mm 3 phase A kw (Heavy duty motor control rqd) 78 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C Uni Jet 1000 (3 phase only) Max flow 5,000 l/min for 4 work positions H = 420 mm W = 400 mm D = 335 mm 3 phase A kw 76 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C-A00150 Max flow 20,000 l/min for up to 12 work positions. H = 625 mm W = 570 mm D = 645 mm 3 phase A kw (Heavy duty motor control rqd) 82 db(a) Must be fitted with vacuum relief valve and motor overload or warranty may be void C DUST EXTRACTION Suction Motors

37 SERVICE KITS for SMART Suction and Compressors Service kits - For SMART Suction and Compressors: Each spare parts kit is supplied with a service checklist and instructions. Turbo SMART service kit Kit includes: Separator non-return valve assy + retainers Complete inlet filter assy Separator recirculation valve diagphragm Set of o-rings 0.5m of 40mm heat resistant suction hose Suction motor bearings and seal C-1SK000 Hydrocyclone service kits Kits includes: K-SK2000 Set of o-rings (18 in total) Replacement flexible hoses & fastening zip ties Bottle of Lubri-Jet drops ISO- 5.5 Service Kit - Micro SMART C-MhSK00 ISO- 18 Service Kit - Turbo SMART C-1hSK00 Compressor service kits Kits includes: Set of air intake filters (1 per cylinder) & rubber cap Desicaant dryer outlet filter & o-ring Replacement motor start capacitor 1 - Cylinder Compressor Service Kit K-SK Cylinder Compressor Service Kit K-SK Cylinder Compressor Service Kit K-SK3000 page 37

38 In-line filter Bracket for 0040 filter Filter element for 0040 In-line filter with 25mm port connections. Includes filter element. This filter is also the inlet filter of Turbo Jet 1 and 2 Modular. C Mounting bracket for in-line filter (C ). L-shaped bracket designed to be able to mount filter in a vertical or horizontal position. N-40hB00 Filter element for in-line filter (C ) and Turbo Jet 1 & 2 Modular inlet filter. C : C : single 6 pack page 38 Complete filter (element and housing) for SMART suction units Complete inlet filter for SMART suction units. Micro - C Turbo - C Maxi - C C C C Filter element for manual tip support (0011B) & Aspi Jet range C : C : single 6 pack Air filter for Maxi Canister separator & Aspi Jets C : C : single 10 pack C : 100 pack SPARE PARTS Filters

39 SPARE PARTS PARTS Filters Inlet filter for Maxi Canister separator & Aspi Jet 7, 8 & 9 Inlet filter for Maxi Canister separator which are also installed in Aspi Jets 7, 8 and 9. C Air inlet filter for Compressors K : K : K : single 10 pack 50 pack Filter for pneumatic tip support (0055) Filter element for all pneumatic tip support units. C page 39 Filter for spittoon Dust filter bag - 5 micron C-A01280: Dust filter bag - 1 micron Manufactured to fit different brand dental chair spittoon bowls. To suit Adec and Anthos: C To suit Planmeca: C To suit Sirona: C single C-A : 10 pack C-A : 50 pack For the filtration of fine dust. Fits in all dust filter bag containers. C-A01440

40 Filter for Pneumatic Manifold page 40 Inlet filter element for Turbo Tecno and Turbo Flux modular O-rings O-rings O-rings O-ring for manual tip support (0011B) manifold Heat resistant o-ring for small hose end O-ring for Turbo SMART inlet filter C : Filter element used for Cattani Pneumatic Manifold (fitted in some Italian Dental chairs, i.e. Anthos) single C : 20 pack O-ring for small hose end C : single C : 20 pack C C hR: C hR-20: O-ring for large hose end C : C : single 20 pack single 20 pack Heat resistant o-ring for large hose end C hR: C hR-20: single 20 pack There are 2 different sizes used for different models - 35 mm diameter and 45 mm diameter. C : C : C : 35 mm 45 mm single C : 20 pack: O-ring for ISO 18 Hydrocyclone amalgam container C : single C : 20 pack SPARE PARTS Filters & O-rings

41 SPARE PARTS Hose Connectors and fittings Straight hose connectors Elbow hose connectors 32mm I.D. female coupling to tapered spigot for flexible suction hose. 20 mm (C-3922C0) 25 mm (C-3922B0) 30 mm (C-3922A0) C-3922C0/C-3922B0/C-3922A0: single C-3922C0-10/C-3922B0-10/C-3922A0-10: 10 pack 32mm I.D. female coupling to tapered spigot for flexible suction hose. 25 mm (C-3923B0) 30 mm (C-3923A0) C-3923B0/C-3923A0: single C-3923B0-10/C-3923A0-10: 10 pack Hose connector for motorised suction isolation valve Fits into the motorised suction isolation valve with tapered spigot for flexible suction hose. 30 mm (C ) 40 mm (C ) C /C page 41 Coupling connector - 32mm 32mm O.D. male joining coupling with o-rings. C-0040D0: Mounted connectors - flange fitting with captive nuts For 2 hose tip support (0011B) & Aspi Jets C For Turbo Jet 1 & 2 Modular in cover C single C-0040D0-10: 10 pack Adaptor for EP Suction Isolation Valve Reduction bush - glues into 40mm DWV pipe (pipe may need to be heated to fit the bush). Reduces internal diameter to 32mm to accept EP Suction Isolation Valve or coupling connector - 32mm (C-0040D0). F-AEP400

42 Drain pump and housing for Continuous Suction Separator C Drain pump ONLY for Continuous Suction Separator C Drain Pump for Aspi Jet 7, 8 and 9 C Drain pump for Mono Jet C C Magnetic Drain Pump C M page 42 SPARE PARTS Drain Pumps

43 SPARE PARTS Manual Tip Support 001A and 0011B Highlighted items are parts for the C0011B. Order codes for hose terminals and hose & terminal kits - see page 31. Order codes for suction hose - see page 32. NB: Standard suction hose used on this tip support is spiral. n.a.s. = not available separately No. Item Code Black Grey Description 1 C Hose connector 30mm for 0011A 2 C Mounting bracket for 0011A 4 C C-1117G0 Reducer 5 C Micro switch for 0011 switched hanger 6 C C-1118G0 Activating pin for mm terminal 7 C C-1119G0 Activating pin for mm terminal 8 C C-604G00 Switched hanger complete with switches 9 C C G Suction hose manifold for 0011A (inc. elbow) 10 C Filter element for manual tip support 0011B 11 C * O-ring for manual tip support (0011B) manifold 12 C C-1132G0 Suction hose manifold for 0011B (& Aspi) 13 C * O-ring for 11mm hose end connector 14 C * O-ring for 17mm hose end connector 15 C C Hose & terminal end connector 17mm 16 C C Hose & terminal end connector 11mm NOT SHOWN: C HR* C HR* * See page 40 for Bulk Prices on o-rings Heat resis. o-ring for 11mm hose & terminal end connector Heat resis. o-ring for 17mm hose & terminal end connector n.a.s. n.a.s. n.a.s. n.a.s. n.a.s G N n.a.s page 43

44 Order codes for hose terminals and hose & terminal kits - see page 31. Order codes for suction hose - see page 32. NB: Standard suction hose used on this tip support is silicone. No. Item Code Black Grey Description 1 C C-5502G0 Top cover for C Activating pin KIT for 0055 inc o-ring & seal 3 (supplied with C ) Seal - activating pin (not available sep.) 4 (supplied with C ) O-ring - activating pin (not available sep.) 5 C C-5517G0 Blanking cap for C Diaphragm lid - LVE (11mm) side 7 C Locking bar for 0055 micro switch 8 C Micro switch to suit C Diaphragm lid - HVE (17mm) side 10 C Diaphragm for C Switch cable fastener for C C-5518G0 Body for C C-11014G Hose terminal large - 17mm 14 C HR* Heat resis. o-ring for 17mm hose connector 15 C C Hose end connector 17mm 16 C-11012B C-11012S-00G 17mm Silicone suction hose 17 C C-11015G Hose terminal small - 11mm 18 C HR* Heat resis. o-ring for 11mm hose connector 19 C C Hose end connector 11mm 20 C-11013B C-11013S-00G 11mm Silicone suction hose 21 C C-5512G0 Filter lid for C Seal for 0055 filter lid 23 C-5518T0 C-5518TG Threaded insert for 0055 filter cap 24 C O-ring for 0055 threaded insert 25 C Filter element for pneum. tip support C C-5516G0 Suction hose connector 25mm for C Mounting bracket for 0055 * See page 40 for Bulk Prices on o-rings page 44 SPARE PARTS Pneumatic Tip Support 0055

45 SPARE PARTS Continuous Suction/Mini Separator No. Item Code Description 1 C o lid for Cont. Suct./Mini Separator 2 C o lid for Cont. Suct./Mini Separator 3 C Probe cover for Cont. Suct./Mini Separator (90o lid) 4 C Probe PCB for Cont. Suct./Mini Separator (90o lid) 5 C O-ring for Cont. Suct./Mini Separator lid 7 C Seal for Cont. Suct./Mini Separator lid 8 C-3923A0 Elbow hose connector 30mm 9 C-3922A0 Straight hose connector 30mm 10 C Probe cover for Cont. Suct./Mini Separator (180o lid) 11 C Probe PCB for Cont. Suct./Mini Separator (180o lid) 12 C-3922B0 Straight hose connector 25mm 13 C-3923B0 Elbow hose connector 25mm NOT SHOWN: C-6812B0 C-AC4500 Plastic enclosure for AC45 PCB AC45 PCB for Cont. Suct. Separator * See page 41 for Bulk Prices on hose connectors page 45 TROVA-Find * * * ** * TROVA-Find ** * * 90 o Inlet/Outlet lids (1) are used on Continuous Suction/Mini Separators in cover. ** 180 o Inlet/Outlet lids (2) are used on Continuous Suction/Mini Separators without cover.

46 TROVA-Find B 2 E F A No. Item Code Description 1 C Rubber clamps for all Cattani separator lids 2 C Tank for Cont. Suct./Mini Separator 3 C O-ring for base of all Cattani separator tanks 4 C Rubber drain valve assy for all Cattani separator tanks 5 C Breather outlet - Cont. Suct. non-return 6 C Breather valve - Cont. Suct. non-return 7 C O-ring for Cont. Suct. non-return inlet 8 C Outlet elbow - Cont. Suct. non-return 9 C O-ring - waste outlet Cont. Suct. non-return 10 C * O-ring - base of Cont. Suct. non-return unit 11 C Rubber flap valve - non-return 12 C Inlet flange connector - Cont. Suct. non-return 13 C C Retaining clip for non-return flap valve (211600) 14 C Housing for Cont. Suct. drain pump 15 C O-ring for Cont. Suct. drain pump 16 C Drain pump ONLY for Cont. Suct. Separator 17 C Drain pump & housing for Cont. Suct. Separator 18 C Non-return & breather assy - Cont. Suct. Separator * See page 40 for Bulk Prices for o-rings SPARE PARTS Continuous Suction/Mini Separator page 46

47 SPARE PARTS Continuous Suction/Mini Separator No. Item Code Description 1 C Diaphragm for recirculating valve 3 C Cover for recirculating valve 4 C Spring for T.SMART sep. recirc. valve 5 C Actuating pin for T.SMART sep. recirc. valve 6 C T.SMART centrifugal sep. body 7 C O-ring for T.SMART Inlet filter housing 8 C Complete inlet filter for T.SMART 9 C Retainer plate T.SMART sep. waste non-return valve 10 C Waste outlet elbow (for units with ISO-18) 11 C Retainer plate for T.SMART sep. waste outlet fitting 12 C Waste outlet connector (for units without ISO-18) 13 C C Retaining clip for non-return flap valve (211600) 14 C Rubber flap valve - non-return (T.SMART emerg. waste) 15 C Rubber flap non-return valve for T.SMART waste 16 C O-ring for T.SMART waste non-return assy. to body 17 C T.SMART waste non-return valve assy. 18 C O-ring for T.SMART waste non-return assy. to outlet 19 C O-ring for T.SMART sep. air outlet fitting 20 C Elbow hose fitting for T.SMART sep. air outlet 21 C Separation cone for T.SMART 22 C Impeller for T.SMART sep. 24 C O-ring for T.SMART sep. base 25 C T.SMART sep. base 26 C Fan cover for T.SMART sep. motor 27 C Cooling fan for T.SMART sep. motor 31 B RS Bearing (cooling fan end) 32 C Motor rotor 33 C Motor junction block cover 34 C Motor stator 35 B-60042R-SC3 Bearing (turbine end) 37 C Lip seal for rotor TURBO-SD (*) M ~ M 3~ TURBO-COMPACT M 3~ A Codice ricambi Spare parts item No. B C D V Hz A Codice ricambi Spare parts item No. B C D V Hz B C A page 47

48 No. Item Code Description 1 C Separator air filter 2 C-3923A0 Elbow hose connector 30mm 3 C O -ring for Aspi Jet 6 inlet elbow 4 C Separator lid for Aspi Jet 6 5 C Seal for Aspi Jet 6 lid 6 C Stainless steel top for Aspi Jet 6 7 C Rubber clamps for all Cattani separator lids 8 C Pin for door safety switch 9 C Separator canister for Aspi Jet 6 10 C Door handle - Aspi Jet 6 11 C Support base for Aspi Jet 6 canister 12 C Rubber elbow for Uni Jet 13 C Uni Jet 75 suction motor 14 C Door safety switch 15 C PCB for Aspi 6 16 C-604G00 Table support (grey) complete with switches 17 C-1132G0 Suction hose manifold (grey) for 0011B (& Aspi) 18 C Inlet filter element for 0011B (& Aspi) 19 C Mounted hose connector 20 C * O-ring for 0011B hose manifold 21 C Plastic vent grille for Aspi Jet cabinets 22 C Castor wheel for Aspi (each) 23 C Main switch for Aspi Jet * See page 40 for Bulk Prices for o-rings SPARE PARTS Aspi Jet 6 page 48