The Dormont Blue Hose

Transcription

1 Product Showcase EXCLUSIVE! Rotation technology (patent pending) reduces stress at both hose ends The Dormont Blue Hose For Caster-mounted Commercial Gas Equipment EXCLUSIVE! Inhibits growth of bacteria, mold and mildew on the gas connector (patent pending) Construction For caster-mounted commercial cooking equipment Heavy-duty, flexible, corrugated 304 stainless steel tubing Braid Tight-weave braid prevents corrugations from stretching as equipment is moved Most Popular Products Reference Safety System TM Deluxe Gas Connector Installation Kits The Safety System is a complete gas equipment connection system specifically engineered for commercial kitchen use. This kit contains the Blue Hose with a SnapFast QD, a full port gas ball valve, restraining cable and elbows. 1675KIT48 3/4" x 48" 1675KIT36 3/4" x 36" See page 11 Safety Quik TM Quick Disconnect Protection Valve The Safety Quik is a quick disconnect protection valve that combines the one-handed QD functionality of the SnapFast QD, with a patented safety valve that protects you and your business. See pages 6-8 & 14 The Dormont Blue Hose with SnapFast QD Our most popular gas connector is the Blue Hose with the SnapFast QD. It is the gas connection workhorse of the commercial kitchen. 1675BPQR48 x 48'' gas connector with QD and restraining cable 1675BPQ48 3/4" x 48" gas connector with QD See page 11 The Supr-Swivel Multi-plane fitting Supr-Swivel s multi-plane rotation allows increased movement at either end of the connector, significantly reducing stress on the hose. The Stationary Gas Connector Our Stationary Gas Connector, with PVC Coating, provides a clean and safe alternative to black, hard pipe installations for fixed, curb-mounted & counter-top equipment. Properly sized for high BTU equipment. SnapFast TM One-handed QD SnapFast is the only one-handed Quick Disconnect (QD) design certified by CSA for commercial gas cooking equipment. The SnapFast QD is part of the exclusive Dormont Safety System. TM S50 S75 S100 S125 A50 1/2'' QD A75 QD See pages 6-7, 9-10 & NPFS48 3/4" x 48" stationary connector See page 13 A100 QD A /4'' QD See pages 9-11 & 14 3

2 BTU Flow Capacities Table of Contents The Safety System Inside Front Cover The Blue Hose Construction page 3 Product Showcase page 3 BTU Flow Capacity page 4 Selecting a Moveable Gas Connector Kit or Hose page 5 Safety Quik TM Quick Disconnect Protection Valve Assemblies Safety Quik with 2 Supr-Swivels Deluxe Gas Connector Kitspage 6 Safety Quik with 2 Supr-Swivels Hose Assemblies page 6 Safety Quik with 1 Supr-Swivel Deluxe Gas Connector Kits..page 7 Safety Quik with 1 Supr-Swivel Hose Assemblies page 7 Safety Quik Deluxe Gas Connector Kits page 8 Safety Quik Hose Assemblies page 8 SnapFast TM One-handed Quick Disconnect Assemblies SnapFast with 2 Supr-Swivels Deluxe Gas Connector Kits...page 9 SnapFast with 2 Supr-Swivels Gas Connector Assemblies...page 9 SnapFast with 1 Supr-Swivel Deluxe Gas Connector Kits....page 10 SnapFast with 1 Supr-Swivel Gas Connector Assemblies...page 10 SnapFast Deluxe Gas Connector Kits page11 SnapFast Gas Connector Assemblies page11 The Blue Hose-Moveable Gas Connectors page12 Stationary Gas Connector Kits and Hoses page13 Full Port Gas Ball Valves page14 Gas Pressure Regulators page14 Gas Connector Fittings page14 Bushings, Threaded Couplers, Elbows page14 Restraining Cables page14 Water, Steam and Combi-oven Connectors page15 Swirl Hoses page16 Warranty, Terms and Conditions page17 Codes and Certifications page17 Total Customer Commitment page18 BTU Flow Capacities Gas Connectors for Moveable Equipment 1650B, 1650BP 1/2'' 152, , , ,000 93,000 87, BQ, BPQ, BPQB, BPCF 1/2'' 98,000 87,000 77,000 68,000 60,000 55, B, 1675BP 326, , , , , , BQ, BPQ, BPQB, BPCF 260, , , , , , B, 16100BP 652, , , , , , BQ, BPQ, BPQB, BPCF 425, , , , , , B, 16125BP 1-1/4'' 1,204,000 1,075, , , , , BQ, BPQ 1-1/4'' 783, , , , , ,000 Gas Connectors for Moveable Equipment with Safety Quik and Supr-Swivel Fittings 1650BPQS, BPCFS 1/2'' 92,000 81,000 72,000 63,000 56,000 51, BPQ2S, BPCF2S 1/2'' 88,000 77,000 69,000 60,000 54,000 48, BPQS, BPCFS 242, , , , , , BPQ2S, BPCF2S 230, , , , , , BPQS, BPCFS 396, , , , , , BPQ2S, BPCF2S 377, , , , , ,000 CSA International design certifies gas connectors for a maximum operating pressure of 0.5 psig. Capacities shown, which exceed minimum ANSI requirements, are results from independent testing laboratories. Minimum required BTU capacities for gas connectors (B & BP models) are defined by ANSI Z Flow capacities for connector assemblies exclude manual shut-off valves. BTU capacities decrease when the length of the connector increases. Flow rating BTU inch W C pressure drop. 4

3 Moveable Gas Connector Selection Guide Selecting a Dormont Safety System Deluxe Gas Connector Kit Safety System Deluxe Gas Connector Kits Include: Dormont Blue Hose with choice of exclusive Safety System fittings Safety Quik, SnapFast and Supr-Swivel (1) Valve (2) Street Elbows (1) Restraining Cable Safety Quik is a quick disconnect and valve combination fitting. No additional valve will be shipped with a kit where the Quick Disconnect Protection Valve (CF) has been selected. For each Supr-Swivel (S) selected, one elbow will be removed from the kit. 16 Diameter KIT QD device Swivels Length in inches Insert inner diameter of desired gas connector: 50 = 1/2'' 75 = 100 = 125 = 1-1/4'' Insert Dormont exclusive fitting choice for quick disconnect device CF = Safety Quik (Available in 1/2", 3/4", and 1" only) Leave Blank* = SnapFast QD Insert Supr-Swivel selection: S = One Swivel 2S = Two Swivels Leave Blank* = No Swivel Insert length of connector in inches: * Final part numbers do not contain spaces. (Sample Part Number: 1675KITCF2S48 = Deluxe Kit with Safety Quik Quick Disconnect and double Supr-Swivels for a 48'' hose) 36'' and 48'' kits are packaged in a point-of-purchase box unless otherwise specified. 24'' 36'' 48'' 60'' 72'' * Selecting a Dormont Safety System Basic Gas Connector Kit or Gas Connector Assembly 16 Diameter Coated or non-coated QD device Swivels Restraining cable Length in inches Packaging Insert inner diameter of desired gas connector: 50 = 1/2'' 75 = 100 = 125 = 1-1/4'' Insert type of gas connector: BP = Braided & PVC Coated B = Braided O nly * Final part numbers do not contain spaces. Insert Dormont exclusive fitting choice for quick disconnect device CF = Safety Quik (Available in 1/2", 3/4", and 1" only) Q = SnapFast QD Stationary connectors and kits are located on page 13. See price list for 12'' connector information. Insert Supr-Swivel selection: S = One Swivel 2S = Two Swivels Leave Blank* = No Swivel R = Restraining device Leave Blank* = No restraining device Insert length of connector in inches: 24'' 36'' 48'' 60'' 72" Insert packaging options for PVC coated 36'' & 48'' hose lengths: BX = Box Leave Blank* = Polybag Safety System Basic Gas Connector Kits Include: Dormont Blue Hose with choice * of exclusive Safety System fittings Safety Quik, SnapFast and Supr-Swivel (1) Restraining Cable (2) Street Elbows For each Supr-Swivel (S) selected, one elbow will be removed from the kit. 5

4 Gas Connectors for Moveable Equipment Deluxe Installation Kits & Hose Assemblies with Safety Quik Quick Disconnect Protection Valve & Two Supr-Swivels Technical Drawing Gas Supply End Safety Quik Quick Disconnect Protection Valve Supr-Swivel Rotation Technology Tubing Braid Rotation Technology Product Part Numbers - Order Using Part Numbers Listed Below Configuration Inside Dia. 24'' 36'' 48'' 60'' 72'' 1/2'' 1650KITCF2S KITCF2S KITCF2S KITCF2S KITCF2S72 HOSE ASSEMBLY 1650BPCF2S BPCF2S BPCF2S BPCF2S BPCF2S KITCF2S KITCF2S KITCF2S KITCF2S KITCF2S72 HOSE ASSEMBLY 1675BPCF2S BPCF2S BPCF2S BPCF2S BPCF2S KITCF2S KITCF2S KITCF2S KITCF2S KITCF2S72 HOSE ASSEMBLY 16100BPCF2S BPCF2S BPCF2S BPCF2S BPCF2S72 BTU Flow Capacity (Flow rating BTU 0.64 SP. 0.5 inch WC pressure drop) 1650BPCF2S 1/2'' 88,000 77,000 69,000 60,000 54,000 48, BPCF2S 230, , , , , , BPCF2S 377, , , , , ,000 Supr-Swivel Equipment End Approvals & Certifications Component NSF International Criteria C-2, Special Equipment and/or Devices UL 567, Pipe Connectors for Flammable and Combustible Liquids and LP-Gas ANSI Z21.69 / CSA 6.16 Connectors for Moveable Gas Appliances ANSI Z21.41 / CSA 6.9 Quick Disconnect Devices For Use With Gas Fuel ANSI Z21.15 / CGA 9.1 Manually Operated Gas Valves for Appliances, Appliance Connector Valves, and Hose End Valves ANSI Z21.90 Gas Convenience Outlets & Optional Enclosures Meets requirements of ANSI Z223.1 / NFPA 54 National Fuel Gas Code Refer to catalog page 17 for additional approvals & certifications and Dormont gas connector limited lifetime warranty Features & Specifications THE DORMONT BLUE HOSE: Tubing Annealed, 304 stainless steel (ASTM A240) Braiding Multi-strand, 304 stainless steel wire Coating (patent pending) PVC, melts at 350 F, coating will not hold a flame; blue color indicates braided connector End Fittings Carbon steel; zinc and yellow dichromate coating rotation of end fittings at both ends (patent pending) SUPR-SWIVEL : Aluminum body, brass threaded end fittings Movement linear motion, 360 spherical rotation (1/2" & 3/4" swivels) 360 linear motion, 360 spherical rotation (1" & 1-1/4'' swivels) Patent # US patent 5,178,422 and 4,615,547; Canada patent 2,079,825 THE SAFETY QUIK Quick Disconnect Protection Valve: Quick Disconnect Brass body, carbon steel safety sleeve; Flat face, push-to-connect Protection Valve quick disconnect; Full port, brass gas ball valve Thermal Shut-off Shuts off gas flow when internal temperatures exceed 350 F. Patent # US patent 5,383,492 * DELUXE KITS INCLUDE: Restraining Cable PVC coated, carbon steel, multi-strand cable and mounting hardware required for caster-mounted installations 6

5 Gas Connectors for Moveable Equipment Deluxe Installation Kits & Hose Assemblies with Safety Quik Quick Disconnect Protection Valve & One Supr-Swivel Product Part Numbers - Order Using Part Numbers Listed Below Configuration Inside Dia. 24'' 36'' 48'' 60'' 72'' 1/2'' 1650KITCFS KITCFS KITCFS KITCFS KITCFS72 HOSE ASSEMBLY 1650BPCFS BPCFS BPCFS BPCFS BPCFS KITCFS KITCFS KITCFS KITCFS KITCFS72 HOSE ASSEMBLY 1675BPCFS BPCFS BPCFS BPCFS BPCFS KITCFS KITCFS KITCFS KITCFS KITCFS72 HOSE ASSEMBLY 16100BPCFS BPCFS BPCFS BPCFS BPCFS72 BTU Flow Capacity (Flow rating BTU 0.64 SP. 0.5 inch WC pressure drop) 1650BPCFS 1/2'' 92,000 81,000 72,000 63,000 56,000 51, BPCFS 242, , , , , , BPCFS 396, , , , , ,000 Technical Drawing Gas Supply End Safety Quik Quick Disconnect Protection Valve Supr-Swivel Rotation Technology Tubing Braid Rotation Technology Equipment End Approvals & Certifications Component NSF International Criteria C-2, Special Equipment and/or Devices UL 567, Pipe Connectors for Flammable and Combustible Liquids and LP-Gas ANSI Z21.69 / CSA 6.16 Connectors for Moveable Gas Appliances ANSI Z21.41 / CSA 6.9 Quick Disconnect Devices For Use With Gas Fuel ANSI Z21.15 / CGA 9.1 Manually Operated Gas Valves for Appliances, Appliance Connector Valves, and Hose End Valves ANSI Z21.90 Gas Convenience Outlets & Optional Enclosures Meets requirements of ANSI Z223.1 / NFPA 54 National Fuel Gas Code Refer to catalog page 17 for additional approvals & certifications and Dormont gas connector limited lifetime warranty Features & Specifications THE DORMONT BLUE HOSE: Tubing Annealed, 304 stainless steel (ASTM A240) Braiding Multi-strand, 304 stainless steel wire Coating (patent pending) PVC, melts at 350 F, coating will not hold a flame; blue color indicates braided connector End Fittings Carbon steel; zinc and yellow dichromate coating rotation of end fittings at both ends (patent pending) SUPR-SWIVEL : Aluminum body, brass threaded end fittings Movement linear motion, 360 spherical rotation (1/2" & 3/4" swivels) 360 linear motion, 360 spherical rotation (1" & 1-1/4'' swivels) Patent # US patent 5,178,422 and 4,615,547: Canada patent 2,079,825 THE SAFETY QUIK Quick Disconnect Protection Valve: Quick Disconnect Brass body, carbon steel safety sleeve; Flat face, push-to-connect Protection Valve quick disconnect; Full port, brass gas ball valve Thermal Shut-off Shuts off gas flow when internal temperatures exceed 350 F. Patent # US patent 5,383,492 * DELUXE KITS INCLUDE: Elbow Malleable iron - 1 included Restraining Cable PVC coated, carbon steel, multi-strand cable and mounting hardware required for caster-mounted installations HOSE ASSEMBLIES INCLUDE: Hose assembly and (1) elbow 7

6 Gas Connectors for Moveable Equipment Deluxe Installation Kits & Hose Assemblies with Safety Quik Quick Disconnect Protection Valve Technical Drawing Gas Supply End Safety Quik Quick Disconnect Protection Valve Rotation Technology Braid Tubing Product Part Numbers - Order Using Part Numbers Listed Below Configuration Inside Dia. 24'' 36'' 48'' 60'' 72'' 1/2'' 1650KITCF KITCF KITCF KITCF KITCF72 HOSE ASSEMBLY 1650BPCF BPCF BPCF BPCF BPCF KITCF KITCF KITCF KITCF KITCF72 HOSE ASSEMBLY 1675BPCF BPCF BPCF BPCF BPCF KITCF KITCF KITCF KITCF KITCF72 HOSE ASSEMBLY 16100BPCF BPCF BPCF BPCF BPCF72 BTU Flow Capacity (Flow rating BTU 0.64 SP. 0.5 inch WC pressure drop) 1650BPCF 1/2'' 98,000 87,000 77,000 68,000 60,000 55, BPCF 260, , , , , , BPCF 425, , , , , ,000 Rotation Technology Equipment End Approvals & Certifications Component NSF International Criteria C-2, Special Equipment and/or Devices UL 567, Pipe Connectors for Flammable and Combustible Liquids and LP-Gas ANSI Z21.69 / CSA 6.16 Connectors for Moveable Gas Appliances ANSI Z21.41 / CSA 6.9 Quick Disconnect Devices For Use With Gas Fuel ANSI Z21.15 / CGA 9.1 Manually Operated Gas Valves for Appliances, Appliance Connector Valves, and Hose End Valves ANSI Z21.90 Gas Convenience Outlets & Optional Enclosures Meets requirements of ANSI Z223.1 / NFPA 54 National Fuel Gas Code Refer to catalog page 17 for additional approvals & certifications and Dormont gas connector limited lifetime warranty Features & Specifications THE DORMONT BLUE HOSE: Tubing Annealed 304, stainless steel (ASTM A240) Braiding Multi-strand, 304 stainless steel wire Coating (patent pending) PVC, melts at 350 F, coating will not hold a flame; blue color indicates braided connector End Fittings Carbon steel; zinc and yellow dichromate coating rotation of end fittings at both ends (patent pending) THE SAFETY QUIK Quick Disconnect Protection Valve: Quick Disconnect Brass body, carbon steel safety sleeve; Flat face, push-to-connect Protection Valve quick disconnect; Full port, brass gas ball valve Thermal Shut-off Shuts off gas flow when internal temperatures exceed 350 F. Patent # US patent 5,383,492 * DELUXE KITS INCLUDE: Elbow Malleable iron - 2 included Restraining Cable PVC coated, carbon steel, multi-strand cable and hardware required for caster-mounted installations HOSE ASSEMBLIES INCLUDE: Hose assembly and (1) elbow 8

7 Gas Connectors for Moveable Equipment Deluxe Installation Kits & Hose Assemblies with SnapFast QD & Two Supr-Swivels Product Part Numbers - Order Using Part Numbers Listed Below Configuration Inside Dia. 24'' 36'' 48'' 60'' 72'' DELUXE KIT * 1650KIT2S KIT2S KIT2S KIT2S KIT2S72 BASIC KIT ** 1/2'' 1650BPQ2SR BPQ2SR BPQ2SR BPQ2SR BPQ2SR72 HOSE ASSEMBLY 1650BPQ2S BPQ2S BPQ2S BPQ2S BPQ2S72 DELUXE KIT * 1675KIT2S KIT2S KIT2S KIT2S KIT2S72 BASIC KIT ** 1675BPQ2SR BPQ2SR BPQ2SR BPQ2SR BPQ2SR72 HOSE ASSEMBLY 1675BPQ2S BPQ2S BPQ2S BPQ2S BPQ2S72 DELUXE KIT * 16100KIT2S KIT2S KIT2S KIT2S KIT2S72 BASIC KIT ** 16100BPQ2SR BPQ2SR BPQ2SR BPQ2SR BPQ2SR72 HOSE ASSEMBLY 16100BPQ2S BPQ2S BPQ2S BPQ2S BPQ2S72 DELUXE KIT * 16125KIT2S KIT2S KIT2S KIT2S KIT2S72 BASIC KIT ** 1-1/4" 16125BPQ2SR BPQ2SR BPQ2SR BPQ2SR BPQ2SR72 HOSE ASSEMBLY 16125BPQ2S BPQ2S BPQ2S BPQ2S BPQ2S72 BTU Flow Capacity (Flow rating BTU 0.64 SP. 0.5 inch WC pressure drop) Technical Drawing Gas Supply End Supr-Swivel Rotation Technology Tubing Braid Rotation Technology Supr-Swivel 1650BPQ2S 1/2'' 88,000 77,000 69,000 60,000 54,000 48, BPQ2S 230, , , , , , BPQ2S 1" 377, , , , , ,000 SnapFast Quick Disconnect Equipment End Approvals & Certifications Component NSF International Criteria C-2, Special Equipment and/or Devices UL 567, Pipe Connectors for Flammable and Combustible Liquids and LP-Gas ANSI Z21.69 / CSA 6.16 Connectors for Moveable Gas Appliances ANSI Z21.41 / CSA 6.9 Quick Disconnect Devices For Use With Gas Fuel Meets requirements of ANSI Z223.1 / NFPA 54 National Fuel Gas Code Refer to catalog page 17 for additional approvals & certifications and Dormont gas connector limited lifetime warranty Features & Specifications THE DORMONT BLUE HOSE: Tubing Annealed, 304 stainless steel (ASTM A240) Braiding Multi-strand, 304 stainless steel wire Coating (patent pending) PVC, melts at 350 F, coating will not hold a flame; blue color indicates braided connector End Fittings Carbon steel; zinc and yellow dichromate coating rotation of end fittings at both ends (patent pending) THE SNAPFAST ONE HANDED QUICK DISCONNECT - QD: Quick Disconnect Brass body, carbon steel threaded end fittings, and aluminum collar Thermal Shut-off Polymer insert in QD melts when internal temperatures exceed 350 F to shut off gas flow. SUPR-SWIVEL : Aluminum body, brass threaded end fittings Movement linear motion, 360 spherical rotation (1/2" & 3/4" swivels) 360 linear motion, 360 spherical rotation (1" & 1-1/4'' swivels) Patent # US patent 5,178,422 and 4,615,547; Canada patent 2,079,825 * DELUXE KITS INCLUDE: Restraining Cable PVC coated, carbon steel, multi-strand cable Valve % full port, brass gas ball valve ** BASIC KITS INCLUDE:..The Dormont Blue Hose and restraining cable and hardware required for caster-mounted installations 9

8 Gas Connectors for Moveable Equipment Deluxe Installation Kits & Hose Assemblies with SnapFast QD & One Supr-Swivel Technical Drawing Gas Supply End Supr-Swivel Rotation Technology Tubing Braid Rotation Technology SnapFast Quick Disconnect Equipment End Product Part Numbers - Order Using Part Numbers Listed Below Configuration Inside Dia. 24'' 36'' 48'' 60'' 72'' DELUXE KIT * 1650KITS KITS KITS KITS KITS72 BASIC KIT ** 1/2'' 1650BPQSR BPQSR BPQSR BPQSR BPQSR72 HOSE ASSEMBLY 1650BPQS BPQS BPQS BPQS BPQS72 DELUXE KIT * 1675KITS KITS KITS KITS KITS72 BASIC KIT 1675BPQSR BPQSR BPQSR BPQSR BPQSR72 HOSE ASSEMBLY 1675BPQS BPQS BPQS BPQS BPQS72 DELUXE KIT * 16100KITS KITS KITS KITS KITS72 BASIC KIT ** 16100BPQSR BPQSR BPQSR BPQSR BPQSR72 HOSE ASSEMBLY 16100BPQS BPQS BPQS BPQS BPQS72 DELUXE KIT * 16125KITS KITS KITS KITS KITS72 BASIC KIT ** 1-1/4" 16125BPQSR BPQSR BPQSR BPQSR BPQSR72 HOSE ASSEMBLY 16125BPQS BPQS BPQS BPQS BPQS72 BTU Flow Capacity (Flow rating BTU 0.64 SP. 0.5 inch WC pressure drop) 1650BPQS 1/2'' 92,000 81,000 72,000 63,000 56,000 51, BPQS 242, , , , , , BPQS 1" 396, , , , , ,000 Approvals & Certifications Component 10 NSF International Criteria C-2, Special Equipment and/or Devices UL 567, Pipe Connectors for Flammable and Combustible Liquids and LP-Gas ANSI Z21.69 / CSA 6.16 Connectors for Moveable Gas Appliances ANSI Z21.41 / CSA 6.9 Quick Disconnect Devices For Use With Gas Fuel Meets requirements of ANSI Z223.1 / NFPA 54 National Fuel Gas Code Refer to catalog page 17 for additional approvals & certifications and Dormont gas connector limited lifetime warranty Features & Specifications THE DORMONT BLUE HOSE: Tubing Annealed, 304 stainless steel (ASTM A240) Braiding Multi-strand, 304 stainless steel wire Coating (patent pending) PVC, melts at 350 F, coating will not hold a flame; blue color indicates braided connector End Fittings Carbon steel; zinc and yellow dichromate coating rotation of end fittings at both ends (patent pending) THE SNAPFAST ONE HANDED QUICK DISCONNECT QD: Quick Disconnect Brass body, carbon steel threaded end fittings, and aluminum collar Thermal Shut-off Polymer insert in QD melts when internal temperatures exceed 350 F to shut off gas flow. SUPR-SWIVEL : Aluminum body, brass threaded end fittings Movement linear motion, 360 spherical rotation (1/2" & 3/4" swivels) 360 linear motion, 360 spherical rotation (1" & 1-1/4'' swivels) Patent # US patent 5,178,422 and 4,615,547; Canada patent 2,079,825 * DELUXE KITS INCLUDE: Elbow Malleable iron - 1 included Restraining Cable PVC coated, carbon steel, multi-strand cable Valve % full port, brass gas ball valve ** BASIC KITS INCLUDE:..The Dormont Blue Hose and restraining cable and hardware required for caster-mounted installations HOSE ASSEMBLIES INCLUDE: Hose assembly and (1) elbow

9 Deluxe Installation Kits & Hose Assemblies with SnapFast QD Gas Connectors for Moveable Equipment Product Part Numbers - Order Using Part Numbers Listed Below Configuration Inside Dia. 24'' 36'' 48'' 60'' 72'' DELUXE KIT * 1650KIT KIT KIT KIT KIT72 BASIC KIT ** 1/2'' 1650BPQR BPQR BPQR BPQR BPQR72 HOSE ASSEMBLY 1650BPQ BPQ BPQ BPQ BPQ72 DELUXE KIT * 1675KIT KIT KIT KIT KIT72 BASIC KIT ** 1675BPQR BPQR BPQR BPQR BPQR72 HOSE ASSEMBLY 1675BPQ BPQ BPQ BPQ BPQ72 DELUXE KIT * 16100KIT KIT KIT KIT KIT72 BASIC KIT ** 16100BPQR BPQR BPQR BPQR BPQR72 HOSE ASSEMBLY 16100BPQ BPQ BPQ BPQ BPQ72 DELUXE KIT * 16125KIT KIT KIT KIT KIT72 BASIC KIT ** 1-1/4" 16125BPQR BPQR BPQR BPQR BPQR72 HOSE ASSEMBLY 16125BPQ BPQ BPQ BPQ BPQ72 BTU Flow Capacity (Flow rating BTU 0.64 SP. 0.5 inch WC pressure drop) Technical Drawing Gas Supply End Braid Tubing Rotation Technology SnapFast Quick Disconnect 1650BPQ 1/2'' 98,000 87,000 77,000 68,000 60,000 55, BPQ 260, , , , , , BPQ 1" 425, , , , , , BPQ 1-1/4" 783, , , , , ,000 Equipment End Approvals & Certifications Component NSF International Criteria C-2, Special Equipment and/or Devices ANSI Z21.69 / CSA 6.16 Connectors for Moveable Gas Appliances ANSI Z21.41 / CSA 6.9 Quick Disconnect Devices For Use With Gas Fuel Meets requirements of ANSI Z223.1 / NFPA 54 National Fuel Gas Code Refer to catalog page 17 for additional approvals & certifications and Dormont gas connector limited lifetime warranty Features & Specifications THE DORMONT BLUE HOSE: Tubing Annealed, 304 stainless steel (ASTM A240) Braiding Multi-strand, 304 stainless steel wire Coating (patent pending) PVC, melts at 350 F, coating will not hold a flame; blue color indicates braided connector End Fittings Carbon steel; zinc and yellow dichromate coating rotation of end fittings at both ends (patent pending) THE SNAPFAST ONE HANDED QUICK DISCONNECT QD: Quick Disconnect Brass body, carbon steel threaded end fittings, and aluminum collar Thermal Shut-off Polymer insert in QD melts when internal temperatures exceed 350 F, to shut off gas flow * DELUXE KITS INCLUDE: Elbow Malleable iron - 2 included Restraining Cable PVC coated, carbon steel, multi-strand cable Valve % full port, brass gas ball valve ** BASIC KITS INCLUDE: The Dormont Blue Hose and restraining cable and hardware required for caster-mounted installations 11

10 Gas Connectors for Moveable Equipment The Dormont Blue Hose Technical Drawing Product Part Numbers - Order Using Part Numbers Listed Below Rotation Technology Configuration Inside Dia. 24'' 36'' 48'' 60'' 72'' HOSE ONLY 1/2'' 1650BP BP BP BP BP72 HOSE ONLY 1675BP BP BP BP BP72 HOSE ONLY 16100BP BP BP BP BP72 HOSE ONLY 1-1/4'' 16125BP BP BP BP BP72 Braid Tubing BTU Flow Capacity (Flow rating BTU 0.64 SP. GR@ 0.5 inch WC pressure drop) 1650BP 1/2'' 152, , , ,000 93,000 87, BP 326, , , , , , BP 652, , , , , , BP 1-1/4'' 1,204,000 1,075, , , , ,000 Rotation Technology Approvals & Certifications Component NSF International Criteria C-2, Special Equipment and/or Devices ANSI Z21.69 / CSA 6.16 Connectors for Moveable Gas Appliances Meets requirements of ANSI Z223.1 / NFPA 54 National Fuel Gas Code Refer to catalog page 17 for additional approvals & certifications and Dormont gas connector limited lifetime warranty Features & Specifications THE DORMONT BLUE HOSE: Tubing Annealed, 304 stainless steel (ASTM A240) Braiding Multi-strand, 304 stainless steel wire Coating (patent pending) PVC, melts at 350 F, coating will not hold a flame; blue color indicates braided connector End Fittings Carbon steel; zinc and yellow dichromate coating; male x male rotation of end fittings at both ends (patent pending) 12

11 Stationary Gas Connector Kits and Hoses with Gas Connectors for Stationary Equipment Product Part Numbers - Order Using Part Numbers Listed Below Configuration Inside Dia. 24'' 36'' 48'' 60'' 72'' KIT 1/2'' 1650NPKIT NPKIT NPKIT NPKIT NPKIT72 HOSE ONLY 1650NPFS NPFS NPFS NPFS NPFS72 KIT 1675NPKIT NPKIT NPKIT NPKIT NPKIT72 HOSE ONLY 1675NPFS NPFS NPFS NPFS NPFS72 KIT 16100NPKIT NPKIT NPKIT NPKIT NPKIT72 HOSE ONLY 16100NPFS NPFS NPFS NPFS NPFS72 KIT 1-1/4" 16125NPKIT NPKIT NPKIT NPKIT NPKIT72 HOSE ONLY 16125NPFS NPFS NPFS NPFS NPFS72 BTU Flow Capacity (Flow rating BTU 0.64 SP. 0.5 inch WC pressure drop) 1650NPFS 1/2'' 152, , , ,000 93,000 87, NPFS 326, , , , , , NPFS 652, , , , , , NPFS 1-1/4'' 1,204,000 1,075, , , , ,000 Technical Drawing Flared End Fitting MIP Tubing Flared End Fitting FIP Approvals & Certifications Component NSF International Criteria C-2, Special Equipment and/or Devices ANSI Z21.24 / CSA 6.10 Connectors for Gas Appliances Meets requirements of ANSI Z223.1 / NFPA 54 National Fuel Gas Code Refer to catalog page 17 for additional approvals & certifications and Dormont gas connector limited lifetime warranty Features & Specifications THE DORMONT STATIONARY HOSE: Tubing Annealed, 304 stainless steel (ASTM A240) Coating (patent pending) PVC, melts at 350 F, coating will not hold a flame; yellow color indicates non-braided connector End Fittings Carbon steel; zinc and yellow dichromate coating; flared design; male x female KITS INCLUDE: Elbow Malleable iron Valve % full port brass gas ball valve Selecting a Dormont Safety System Stationary Gas Connector Kit Dormont Stationary Gas connectors are ideal for connecting Stationary gas cooking equipment that is: Mounted on fixed legs Curb-mounted Counter-top 16 Diameter NP KIT or Hose only Length in inches Packaging Insert inner diameter of desired gas connector: 50 = 1/2'' 75 = 100 = 125 = 1-1/4'' Insert configuration: KIT = Complete kit with full port gas valve & elbow FS = Stationary Hose Only Insert length of connector in inches: 24'' 36'' 48'' 60'' 72'' FOR HOSES ONLY: Insert packaging options for 36'' & 48'' hose lengths: BX = Box Leave Blank* = Polybag * * Final part numbers do not contain spaces. (Sample Part Number: 1675NPSF48BX = stationary connector, 48'' length in a box) 13

12 Safety System Gas Connector Accessories The Dormont Safety System includes the gas connection accessories needed to make safe and proper gas equipment installations. Restraining Cables & Mounting Hardware 100% Full Port Gas Ball Valves - Straight Valves FIP x FIP RDC24 RDC36 RDC48 RDC60 Description For 24" Connectors For 36" Connectors For 48" Connectors For 60" and 72" Connectors 038FV 050FV 075FV 100FV 125FV 150FV Description 3/8" FIP x 3/8" FIP 1/2" FIP x 1/2" FIP 3/4" FIP x 3/4" FIP 1" FIP x 1" FIP 1-1/4'' FIP x 1-1/4'' FIP 1-1/2" FIP x 1-1/2'' FIP Fittings - For Use With Dormont Gas Connectors Only NOTE: For use with old-style, flared moveable gas connectors and Safety System Stationary Gas Connectors Description Designed For Connector Series /2" (15/16" - 16 thread) x 1/2" MIP (tapped 3/8") /2" (15/16" - 16 thread) x 3/4" MIP (tapped 1/2") /2" (15/16" - 16 thread) x 1/2" FIP /2" (15/16" - 16 thread) x 3/4" FIP /4" Flare x 3/4" MIP (tapped 1/2") /4" Flare x 3/4" FIP Flare x 1" MIP (tapped 3/4") Flare x 1" FIP /4'' Flare x 1-1/4'' MIP (tapped 1") /4'' Flare x 1-1/4'' FIP Safety Quik Quick Disconnect Protection Valve CF-50 CF-75 CF-100 1/2'' SnapFast One-handed Quick Disconnect A50 A75 A100 A125 Supr-Swivel Multi-plane Fitting S50 S75 S100 S125 1/2'' 1-1/4'' with 1/2'' adapter 1-1/4'' LP Gas Pressure Regulators Natural Gas Pressure Regulators Elbows 90 Street Elbow - Male x Female Bushings Pipe BTU Inlet Outlet Size Capacity Pressure Pressure RV47LLP-22 3/8'' 125,000 1/2 PSIG 8" - 12" wc R48P /2'' 250,000 1/2 PSIG 5" - 12" wc R48P ,000 1/2 PSIG 5" - 12" wc RV61LLP-52 1" 2,500,000 1 PSIG 5" - 12" wc RV61LLP /4" 2,500,000 1 PSIG 5" - 12" wc Pipe BTU Inlet Outlet Size Capacity Pressure Pressure RV47LNG-22 3/8'' 125,000 1/2 PSIG 3" - 6" wc R48N /2'' 250,000 1/2 PSIG 3" - 6" wc R48N ,000 1/2 PSIG 3" - 6" wc RV61LNG-52 2,500,000 1 PSIG 4" - 8" wc RV61LNG /4'' 2,500,000 1 PSIG 4" - 8" wc RV81LNG /2'' 4,500,000 1 PSIG 3" - 8" wc Convertible Gas Pressure Regulators (Natural or LP Gas) Pipe BTU Inlet Outlet Size Capacity Pressure Pressure RV47CL-33 3/8'' 125,000 1/2 PSIG 4" - 10" wc RV48CL-32 1/2'' 250,000 1/2 PSIG 5" - 10" wc RV48CL ,000 1/2 PSIG 5" - 10" wc 050SE 1/2" 075SE 3/4" 100SE 1" 125SE 1-1/4'' Description /4" M NPT x 1/2" F NPT " M NPT x 3/4" F NPT /4'' M NPT x 1" F NPT 90 Elbow - Female x Female 050E 1/2" 075E 3/4" 100E 1" 125E 1-1/4'' Threaded Couplers 050C 1/2" NPS 075C 3/4" NPS 100C 1" NPS 14

13 Water & Steam Connectors PVC Coated and Non-Coated Connectors Dormont flexible stainless steel water connectors are designed for use with commercial cooking equipment requiring a water source for operation. Applications include, but are not limited to, utility distribution systems, steam kettles, steam tables, and combi-ovens. Coated water connectors have exclusive (patent pending.) NOTE: All flared fittings on water, steam and combi-connectors are NSF approved nickel-plated brass or nickel-plated carbon steel. * To order the connectors listed below, add the appropriate length in inches to the end of the part number. Available lengths: 24", 36", 48", 60", or 72". Braided, PVC Coated Water Connectors with Quick Disconnect BP2Q Series: Stainless steel corrugated hose with braid and a permanent PVC coating, fitted with a solid brass, two-way quick disconnect coupling. Please order connector part number specific for HOT (H) or COLD (C) water. Braided Water Connectors with Quick Disconnect B2Q Series: Stainless steel corrugated hose with braid fitted with a solid brass, twoway quick disconnect coupling. ADD TO END OF PART NO. ADD TO END OF PART NO. W25B2Q 1/4'' W25BP2QC 1/4'' W37B2Q 3/8'' W25BP2QH 1/4'' W50B2Q 1/2" W37BP2QC 3/8'' W75B2Q W37BP2QH 3/8'' W100B2Q W50BP2QC 1/2" W50BP2QH 1/2" W75BP2QC W75BP2QH W100BP2QC W100BP2QH Steam Connectors with Quick Disconnect Steam Connectors without Quick Disconnect Braided, PVC Coated Water Connectors without Quick Disconnect BP Series: Stainless steel corrugated hose with braid and a smooth permanent PVC coating. Please order connector part number specific for HOT (H) or COLD (C) water. ADD TO END OF PART NO. W25BPC 1/4'' W25BPH 1/4'' W37BPC 3/8'' W37BPH 3/8'' W50BPC 1/2" W50BPH 1/2" W75BPC W75BPH W100BPC W100BPH Combi-connectors available in 48 or 60 only Braided Water Connectors without Quick Disconnect B Series: Stainless steel corrugated hose with braid and nickel-plated brass fittings on both ends. ADD TO END OF PART NO. W25B 1/4'' W37B 3/8'' W50B 1/2" W75B W100B BIP2Q Series: Stainless steel corrugated hose with braid, covered with orange insulating sleeve, heat shield, and a solid brass two-way quick disconnect coupling. ADD TO END OF PART NO. H50BIP2Q 1/2" H75BIP2Q H100BIP2Q 1" BIP Series: Stainless steel corrugated hose with braid, covered with orange insulating sleeve, heat shield. ADD TO END OF PART NO. H50BIP 1/2" H75BIP H100BIP 1" Note: Combi-connectors are available in 48" and 60" lengths only. To order, add 48 or 60 to the end of the part number. 3/4" hose BIB fitting fits standard garden hose thread. Select part numbers specific for HOT (H) or COLD (C) water lines. Combi-connectors with Quick Disconnect Description CMB37BP2QC* 3/8'' 3/4" HOSE BIB x 3/8'' QD - For Cold Water CMB37BP2QH* 3/8'' 3/4" HOSE BIB x 3/8'' QD - For Hot Water * add 48 or 60 to the end of the part number. Combi-connectors without Quick Disconnect Description CMB37BPC* 3/8'' 3/4" HOSE BIB x 3/8'' MIP - For Cold Water CMB37BPH* 3/8'' 3/4" HOSE BIB x 3/8'' MIP - For Hot Water * add 48 or 60 to the end of the part number. NOTE: Quick Disconnect fittings are not attached to the connector at the factory. 2 - Way Quick Disconnect for Water Connectors 2 - Way coupling shuts off water at the equipment and supply W25QD 1/4'' W37QD 3/8'' W50QD 1/2" W75QD W100QD 15

14 Swirl Hoses for Water Connections The Dormont Swirl Hose is a durable, retractable, NSF certified polyurethane hose. It is designed to connect water fed appliances and liquid dispensing equipment to the water supply. The unique design makes equipment installation quick and easy and provides many advantages over traditional coiled copper tubing water supply lines. The Dormont SWIRL Hose Ice Machine Coffee Machine The Force in Commercial and Institutional Plumbing For information regarding Power Force, Dormont s complete line of commercial pre-rinse units and faucets, contact our Customer Service Department. Specifications and Configurations Maximum Operating Temperature = 160 F Maximum Operating Pressure = 100 PSIG All SWIRL Hose Assemblies include a brass elbow & 72 Series SWIRL Hoses come with a Male Adapter x Female Elbow Series SWIRL Hoses comes with a Male Adapter x Male Elbow 3. Coffee machine kits include Male NPT Adapter x Female Flare Fitting To order the SWIRL Hose water connectors listed below, add the appropriate length in inches to the end of the part number. Available lengths: 48", 72", 96", and 144". Swirl Assemblies (Fixed Male x Swivel Female) /4" /8" /2" ADD TO END OF PART NO. Brass Fittings Description /4" M. NPT x 1/4" F. Flare /4" M. NPT x 3/8" F. Flare Swirl Assemblies (Fixed Male x Quick Disconnect) /4" /8" /2" ADD TO END OF PART NO. Coffee Machine Kits (Male NPT x Female Flared) Description /4" M. NPT x 1/4" F. Flare /4" M. NPT x 3/8" F. Flare ADD TO END OF PART NO. Swirl Hose Elbows (Male x Female) Description /4" M. NPT x 1/4" F. Flare /8" M. NPT x 3/8" F. Flare /2" M. NPT x 1/2" M.NPT 2 - Way Brass Swirl Quick Disconnect Dormont 2 - Way Brass Quick Disconnect prevents backflow of water from the equipment /4" /8" /2" 16

15 Terms and Conditions 1. ACCEPTANCE. If this writing differs in any way from the terms and conditions of Buyer s order or if this writing is construed as an acceptance or as a confirmation acting as an acceptance, then Seller s acceptance is EXPRESSLY MADE CONDITIONAL ON BUYER S ASSENT TO ANY TERMS AND CONDITIONS CONTAINED HEREIN THAT ARE DIFFERENT FROM OR ADDITIONAL TO THOSE CONTAINED IN BUYER S WRITING. Further, this writing shall be deemed notice of objection to such terms and conditions of Buyer. If this writing is construed as the offer, acceptance hereof is EXPRESSLY LIMITED TO THE TERMS AND CONDITIONS CONTAINED HEREIN. In any event, Buyer s acceptance of the goods shall manifest Buyer s assent to Seller s terms and conditions. No addition to or modification of these items will be effective unless set forth in writing and agreed to by Seller. 2. WARRANTIES AND REMEDIES. A. Warranty. Seller warrants to Buyer that it holds and will pass marketable title to the commercial gas connectors sold hereunder. Seller further warrants to Buyer that Seller s commercial gas connector will be free from defects in material and workmanship causing gas leakage during the life of the equipment to which the commercial gas connector is originally connected or installed. Seller warrants to Buyer that the items and components manufactured by Seller other than commercial gas connectors will be free from defects in material and workmanship for a period of five (5) years from tender of delivery to Buyer. For items not manufactured by Seller, the only warranty extended is that of the manufacturer or supplier, if any. B. Exclusions and Conditions. Seller's obligations with respect to the express warranties and remedies contained herein are conditioned on the following: (i) Seller s liability and Buyer s exclusive remedy is expressly limited to Seller s replacement of the defective gas connector or other goods at Seller s cost (excluding labor and freight); it being understood such replacement will be made only upon return of the defective item in accordance with Seller s shipping instructions and return authorization and subject to with Seller s inspection; (ii) Buyer shall not assign its rights under these express warranties and any attempted assignment shall render such warranties, but not any disclaimers or limitations, void and the gas connector and other goods shall be sold AS IS; and (iii) all commercial gas connectors and other goods shall be carefully inspected for damage by Buyer upon receipt, be installed by individuals trained and certified as professionals with respect to such installation, and be installed, used, repaired and maintained by Buyer in accordance with local codes or regulations, standards set by American National Standard Institute and/or CSA International Standards. The commercial gas connectors and other goods shall be warranted in conjunction with the original installation only and the express warranties and remedies contained herein shall not apply to, and shall be void and of no further force or effect upon, damage and/or failure of the commercial gas connectors and other goods caused by or resulting from shipping; improper or unauthorized handling, installation, alteration or repair; misuse, abuse or other occurrences or conditions other than normal use thereof; application or conformity to local codes or regulations not previously made known to Seller; or accident or other casualty. 3. DISCLAIMER OF IMPLIED WARRANTIES. SELLER GIVES NO WARRANTIES EXCEPT THOSE EXPRESSLY CONTAINED HEREIN. SELLER DISCLAIMS ALL OTHER WARRANTIES IMPLIED BY LAW, USAGE OF THE TRADE, COURSE OF DEALING OR COURSE OF PERFORMANCE INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 4. LIMITATIONS OF LIABILITY. The following limitations of Seller s liability are acknowledged by the parties to be fair and reasonable and shall apply to any act or omission hereunder, and to any breach of this contract of which these terms and conditions form a part. A. Disclaimer of Damages. IN NO EVENT SHALL SELLER BE LIABLE FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR INCENTAL DAMAGES WHETHER ARISING UNDER CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY. Such damages include but are not limited to loss of profits, loss of use of the goods, damage to property, and claims of third parties. Some states do not allow the exclusion or limitation of incidental or consequential damages, or any limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. B. Notice and Time of Claims (i) Buyer agrees to check and inspect all products against shipping papers and for damage or shortage upon receipt of goods at destination; (ii) Every claim for loss, damage in transit, or other cause visible upon inspection shall be made with carrier. Claims for shortage must be made within five (5) days of receipt; (iii) The parties expressly waive the statute of limitations and agree that any legal proceeding for any breach of this contract shall be waived unless held within two (2) years after the accrual of the cause of action thereof. 5. Terms. Net 30 Days. Interest on accounts overdue more than thirty (30) days will be charged 2% per month or the highest rate permitted by law, whichever is lower. Buyer shall be liable for any collection costs or attorneys fees incurred as a result of Buyer s failure to comply with this Agreement. 6. Shipping Terms. Prepaid and allowed on $1000 net and over. Under $1000 net, shipments shall be F.O.B. Factory, customer is responsible for all freight charges. The above shall apply only to shipments within the continental United States of America unless otherwise indicated by Seller. The method of shipment and carrier shall be selected by Seller Title and all risks of loss or damage shall pass to Buyer upon delivery to carrier. 7. Returns. No returns are to be made to Dormont Manufacturing Company without first obtaining a return authorization number. Absolutely no returns will be accepted or credited without this prior approval. Returns may be subject to a 25% restocking charge plus any transportation charges incurred. 8. Taxes. The Buyer will pay, or reimburse Seller if it pays, any and all taxes or tariffs or any other similar charges imposed upon this contract, the goods covered hereby or the delivery or use or resale thereof. 9. Applicable Law. All questions arising hereunder shall be interpreted and resolved in accordance with the Commercial Code of the Commonwealth of Pennsylvania without regard to its conflict of law provisions and excluding the United Nations Convention on the International Sale of Goods. 10. Prices subject to change. Minimum Order. $75.00 net. Orders Below Minimum may be subject to a $25.00 handling fee. Dormont Commercial Gas Connector Limited Lifetime Warranty Dormont warrants to the original purchaser that its commercial gas connector will not leak under normal use for the life of the appliance to which it is connected. In the unlikely event of a gas connector leak, Dormont will provide you with a new commercial gas connector to replace the non-performing one. Safety System Global Design Certifications In many international markets, design certification to the ANSI Standard is accepted for gas connector installations. However, in some markets, other national requirements exist. In these areas, Dormont works to earn the required certifications. Dormont has worked with international standards boards to help author gas connector standards. We assist government agencies and utilities to understand the properties of natural and LP gas and requirements of gas appliances. USA CR Swivel Connectors for use with Connectors for Moveable Gas Appliances. ANSI Z21.15/CGA 9.1 Manually Operated Gas Valve for Appliances,Appliance Connector Valves and Hose End Valves. ANSI Z223.1/NFPA 54 National Fuel Gas Code. ANSI Z21.69/CSA 6.16 Metal Connectors for Moveable Gas Appliances. A.G.A. Rqmt. No ANSI Z21.41/CSA 6.9 CANADA Requirement for Gas Convenience Outlets. Quick Disconnect devices for use with gas fuel. Design certified to ANSI/U.L. 567, Pipe Connectors for Flammable and Combustible Liquids and LP-Gas. For use with natural gas and propane. National Sanitation Foundation Criteria C-2 special equipment. (On PVC coated models only.) Approved by the Commonwealth of Massachusetts Board of State Examiners of Plumbers & Gas Fitters. Commonwelth of Massachusetts code requirements Connector length may not exceed 36'' Lever handle valves (ref. page 14) are not permitted; please call for alternate valve selection The products depicted in this catalog are moveable gas appliance connectors that are designe certified to ANSI Z They are not gas hoses. CAN/C.G.A. B149.1 Natural Gas and Propane Installation Code. City of New York MEA # E Active Industry Involvement Dormont plays an active role in the growth and development of the foodservice industry, working closely with companies in all sectors, to promote the safe, efficient use of gas cooking equipment. Dormont is a supporter of: North American Association of Food Equipment Manufacturers Gas Appliance Manufacturing Association Foodservice Consultants Society International Commercial Food Equipment Service Association Foodservice Equipment Distributors Association Marketing Agents for the Foodservice Industry 17

16 Total Customer Commitment TQM We ve built our reputation on an unmatched level of product quality. Our connectors are manufactured using state-of-the-art equipment that ensures consistent high quality products. We are the only full-line gas connector manufacturer that is ISO 9001 certified. This provides our customers with an independent verification of the quality standards and procedures to which we adhere at our manufacturing facility. Access Dormont 7 days a week, 24 hours a day! Our website features a complete product catalog and price list, with an interactive connector selector to help you choose the proper gas connector for your application. We also offer the latest industry news, as well as the ability to contact Dormont experts who are ready to answer your questions. us anytime at info@dormont.com. Electronic Catalog & Quotation Programs Dormont actively participates in the leading industry services that provide electronic information as an additional support service for our customers. Electronic Ordering Electronic Data Interchange (EDI) saves time, improves accuracy and lowers costs for you. Dormont has full EDI capabilities to help you get your program in place. For full details, call our Customer Service Team at. Thank You for Choosing Dormont! Over 50 years ago, well before other brands existed, the stainless steel gas connector was invented and sold by Dormont. Since then, Dormont has manufactured the highest quality, safest, and longest lasting stainless steel gas connectors in the industry. We have committed ourselves to making every connector as if it were to be installed in our own kitchen. With over 50 million connectors installed worldwide, Dormont has the proven experience that you can rely on. We offer the highest quality connectors, an unsurpassed level of customer service, innovative new products, and creative marketing programs. On behalf of everyone at Dormont, I would like to thank you for choosing Dormont as the supplier of your gas connection needs. Evan Segal, President Guiding Principles TRUST We have worked diligently to earn our reputation as the experts in the connection business. We believe in assisting standards bodies in authoring product certifications and leading the industry in ensuring the safest applications possible. QUALITY Quality is the number one priority at Dormont. We are committed to continuous improvement and are dedicated to providing the safest, strongest, longest lasting gas connectors available. INTEGRITY We believe in treating our customers, vendors, and employees with respect and dignity. We value honesty and trustworthiness in all matters and expect it everyday in every transaction. LEADERSHIP We believe in delivering unsurpassed service: providing engineering, design, and technical assistance. We are dedicated to ship your order quickly and accurately and support you with marketing and merchandising assistance to help you grow your business. PASSION People don t care how much you know until they know how much you care! Passionate care of our customers is a core value that founder Jerry Segal has instilled in every Dormont associate. It is a key focus in all our activities. Dormont s Quick Ship 24 program allows you to get what you need, when you need it. We will ship your order for popular Dormont products to any single designated location in the continental United States, within 24 hours. The following conditions apply: Orders for Quick Ship products* will ship within 24 hours of receipt of a purchase order, or the next business day. Orders must ship to a single location in the continental United States Dormont reserves the right to limit quantities All current shipping policies and minimums apply Next day air delivery is available for an additional fee Quick Ship must be clearly marked on the order Available to Dormont customers in good credit standing * Qualifying Quick Ship Products (xx indicates all diameters available- 1/2", 3/4", 1", and 1-1/4") 1675KITCF48 (pg. 8) 16xxKIT48 (pg. 11) 16xxKITS48 (pg. 10) 16xxKIT2S48 (pg. 9) 16xxBP48 (pg. 12) 16xxBPQ48 (pg.11) A50, A75, A100, A125 (pg. 14) All restraining cables (pg. 14) 18