Table of Contents. Component Series Racks FOR ALL YOUR AV GEAR / FULLY CUSTOMIZABLE

Transcription

1 SANUS RACKS

2 Table of Contents COMPONENT SERIES RACKS COMPONENT SERIES RACK PLUS BUNDLES...3 COMPONENT SERIES STACKABLE SKELETON RACKS...4 SANUS ECOSYSTEM SANUS ECOSYSTEM BUNDLES...7 RACK ACCESSORIES EURO SERIES RACKS EURO SERIES RACK ACCESSORIES...12 SANUS Component Series Racks FULLY CUSTOMIZABLE AV RACKS SHIP COMPLETELY ASSEMBLED AND READY TO ROCK. PACKED TO PERFORM Product packaging has been perfected to keep our racks protected so that they re in perfect condition and ready to perform upon delivery. Expertly pallet banded for sound shipping 3-piece protective corrugate wrapping prevents damage Rigid inner base pallet supports entire rack during transport so casters and feet can be safely pre-assembled Sleeve design of box makes it easy to open and repack Component Series Racks FOR ALL YOUR AV GEAR / FULLY CUSTOMIZABLE The Component Series AV racks were designed with high performance and structural integrity in mind. Heavy-gauge welded steel construction, swivel casters and height-adjustable feet ensure perfect leveling and stabilization on any surface. These solid racks come preassembled with shelves and blanking panels for the ultimate in convenience. MODEL CFR U Component Rack 70.5" Tall AV Rack Strong and sturdy construction with heavy-gauge welded steel Customizable rack includes top and bottom cable slots with covers, front and rear adjustable depth threaded rack rails, and multiple 3U removable panels Removable, quick-release side and back panels allow for easy access to components Rack comes preassembled with shelves and blanking panels to simplify ordering and installation Lockable, tempered glass front door can be placed on left or right of rack for added flexibility during installation Convection cooling system allows warm air to escape through top as cooler air is drawn in through bottom of rack, keeping AV gear at the proper temperature ENGINEERED FOR GREATNESS Our racks put your installation and organization concerns at ease. Single vent cutouts on top and bottom is easier than ever to remove Increased hole patterns on top, bottom and back panels make for easy installation of 1U, 2U and 3U devices Rearranged shelves and blanking panels create a sleek, completed look MORE ON COMPONENT SERIES RACKS ON THE NEXT PAGE 23.62" x 23.62" x 70.5" 60 x 60 x cm 23.62" x 23.62" x 67.7" 60 x 60 x cm lbs / kg 800 lbs / kg 36U (2) 1U shelf, 30 lbs/ 13.6 kg. 15"/ 381 mm deep (6) 2U shelf, 50 lbs/ 22.7 kg. 18"/ 457 mm deep s (6) 2U Blanking Panels (3) Tie Bars INTERIOR USABLE SPACE COMPONENT SERIES RACKS SANUS COMPONENT SERIES RACK ACCESSORIES 28 1

3 Component Series Racks FOR ALL YOUR AV GEAR / FULLY CUSTOMIZABLE Component Series Stackable Skeleton Racks WALL MOUNTED OPTION / OPEN DESIGN 1U SHELF 19" x 15" x 1.75" x 38.1 x 4.45 cm 30 lbs / kg 2U SHELF 19" x 18.2" x 3.5" x 46.2 x 8.89 cm 50 lbs / kg The Component Series Stackable Skeleton Racks were designed with high performance and structural integrity in mind. The open design of these racks provides versatility for a variety of height combinations and mounting solutions with no loss of RU space when stacked. The racks include screws, removable shelves and blanking panels for easy assembly in just 15 minutes. MODEL CFR U Component Rack 85" Tall AV Rack MODEL CFR U Stackable Skeleton Rack 35" Tall AV Rack MODEL CFR " x 23.62" x 84.75" 60 x 60 x cm 23.62" x 23.62" x 81" 60 x 60 x cm 27U Component Rack 240 lbs / kg 1000 lbs / kg 44U 55" Tall AV Rack (2) 1U shelf, 30 lbs/ 13.6 kg 15"/ 381 mm deep (7) 2U shelf, 50 lbs/ 22.7 kg 18"/ 457 mm deep s (7) 2U Blanking Panels (3) Tie Bars INTERIOR USABLE SPACE Modular, stackable structures can be coupled into five different height combinations: 40U, 35U, 30U, 20U, and 15U Entire structure, complete with extra screws, levelling feet, removable shelves, blanking panels, wall mounting hardware, stacking kit, shelf straps and equiptment back stops ship in one UPS box 23.62" x 23.62" x 55" 60 x 60 x cm 23.62" x 23.62" x 52.2" 60 x 60 x cm 129 lbs / kg 750 lbs / kg 27U (2) 1U shelf (6) 2U shelf (6) 2U Blanking Panel (2) Tie Bars INTERIOR USABLE SPACE Quick and easy assembly in just 15 minutes Versatile racks can be mounted directly to wall studs or concrete with included hardware, or can be used freestanding on included leveling feet MODEL CFR U Component Rack 34" Tall AV Rack Modular rack structures are SANUS EcoSystem compatible 23.62" x 23.62" x 34" 60 x 60 x cm 23.62" x 23.62" x 31.20" 60 x 60 x cm lbs / kg 500 lbs / kg 15U (2) 1U shelf (2) 2U shelf (2) 2U Blanking Panel (1) Tie Bar INTERIOR USABLE SPACE 20.40" x 20" x 35" x 50.8 x 88.9 cm WHEN WALL MOUNTED 200 lbs / 90.7 kg USING INCLUDED LEVELING FEET OR OPTIONAL CASTERS 600 lbs / kg 20U INCLUDED: (1) 1U shelf (1) 2U shelf (25) rack mount screws (4) leveling feet ON-WALL SWING OUT ACCESSORY CASTER KIT MODEL CFR U Stackable Skeleton Rack 26" Tall AV Rack CFA16SM Allows a CFR1615 or CFR1620 Component Series AV rack to mount and swivel on wall CA6CK- 4 Casters Provides smooth rolling for CFR1620 and CFR1615 Component Series AV Racks DIMENSIONS (w x d x h) 20.40" x 20" x 26.2" x 50.8 x cm WHEN WALL MOUNTED 200 lbs / 90.7 kg USING INCLUDED LEVELING FEET OR OPTIONAL CASTERS 600 lbs / kg 15U INCLUDED: (1) 1U shelf (1) 2U shelf (25) rack mount screws (4) leveling feet LOOK FOR COMPONENT SERIES RACK BUNDLES ON THE NEXT PAGE 2 SANUS COMPONENT SERIES COMPONENT RACK ACCESSORIES SERIES RACKS 28 COMPONENT SERIES STACKABLE SANUS COMPONENT SKELETON RACKS SERIES RACK ACCESSORIES 28 3

4 SANUS EcoSystem SANUS EcoSystem COMPONENT SERIES / RACK ACCESSORIES MULTI-VOLT SYSTEM SAVES SPACE AND TIME The SANUS EcoSystem is a fully customizable accessory that serves as the single power source for all low-voltage equipment in a rack. The multi-volt power supply features regulated 12 Volt DC and regulated 5 Volt DC power ports. Switches on the front control master power, as well as front and back lighting ports. A thermostat probe that controls output ports for cooling fans is included. Along with the available LED lights and fan accessories, use the power cord accessories to connect and power all other compatible low voltage devices and get rid of all those transformers. MODEL CAPT01 Multi-Volt Power Supply Light Switches Easily turn front task light and rear work light on and off Remove This From Your Rack Additional Power Front side 5V USB port, 12V always on and front light connections provide added convenience 5V USB Ports Easily connect up to three components with USB cables MODEL CALT01 MODEL CAPW03, BEFORE Always On 12V Power For network switches, routers, modems, NAS drives, media boxes, control processors, baluns, etc. 1U Task Light CAPW06, CAPW09 Power Wires Thermostat Controlled Keep components cool with available fans, which include 1U ultra quiet fan, 3U ultra quiet fan and 3U volume fan Thermostat Included thermostat kit monitors the rack temperature and automatically activates fans MODEL CALW01 Work Light, 2-Pack MODEL CAFC01 1U Component Cooling Fan Kit MODEL CAFQ01 3U High Volume Fan Kit AFTER MODEL CAFH V Lights Only Easily connect up to three components with USB cables SANUS ECOSYSTEM SANUS COMPONENT SERIES RACK ACCESSORIES 28 3U Ultra Quiet Fan Kit SANUS ECOSYSTEM SANUS COMPONENT SERIES RACK ACCESSORIES 28 5

5 Rack Accessories COMPONENT & STACKABLE SKELETON RACK ACCESSORIES Rack Accessories COMPONENT & STACKABLE SKELETON RACK ACCESSORIES Rack accessories allow you to build your own rack or add to a current rack for a customizable solution to meet your exact needs. BLANKING PANELS POWER ACCESSORIES Fits Component Series AV Racks CASBP1 1U Steel Flat Blanking Panel CASBP2 2U Steel Flat Blanking Panel CASBP3 3U Steel Flat Blanking Panel CAPC01 Rack Mount Surge Protector and Power Conditioner CAPT01 Multi-Volt Power Supply CAPS27 Vertical Power Strip CAPS12 Vertical Surge Protector and Power Conditioner SHELVES AND DRAWERS CAVBP1 1U Flanged Steel Vent Panel CAVBP2 2U Flanged Steel Vent Panel CAVBP3 3U Flanged Steel Vent Panel SMALL PARTS PANEL KITS Fits CFR2144, CFR2136, CFR2127, and CFR2115 CASPK CASH21, CASH22, CASH23 1U, 2U, 3U Vented Shelf SCREWS CADR2 2U Economy Sliding Drawer CADR4 4U Economy Sliding Drawer CASS10 Shelf Stops Create easily accessible and secure storage space for small AV components on the side CAGK Ganging Kit CALK Side Panel Lock and Keys (2) CASC Extra Screws CASC Extra Screws CASC25 25 Extra Screws TIE BARS, WIRE TIES & LACING STRIPS CATBL210 19" L-Shaped Tie Bars CATB010-B1 Offset Tie Bar CACT100 Wire Ties CALS45 Lacing Strips 8 SANUS COMPONENT SERIES RACK RACK ACCESSORIES ACCESSORIES 28 RACK ACCESSORIES SANUS COMPONENT SERIES RACK ACCESSORIES 289

6 Euro Series Racks MODULAR DESIGN / CUSTOMIZABLE Euro Series Accessories The Euro Series AV racks create a clean, modern look while featuring a modular design that can easily be expanded to fit any AV system. Wire management clips secure loose cables for an organized appearance, and adjustable casters ensure the units are always stable and aligned, even on uneven surfaces. MODEL EFAV40 AV Base and Shelves Fully customizable modular design Solid steel construction provides strength and support Open design allows airflow to keep components cool MODEL EFAP21 Pull-Out Base 40.50" x 20.45" x 22.87" x x cm TOP SHELF DIMENSIONS 40.5" x 20.5" x cm TOP SHELF CAPACITY 125 lbs / kg Includes clips to secure loose cables MIDDLE SHELF DIMENSIONS 40.5" x 20.5" x cm MIDDLE SHELF CAPACITY 125 lbs / kg BOTTOM SHELF DIMENSIONS 40.5" x 20.5" x cm BOTTOM SHELF CAPACITY 125 lbs / kg 22.5" x 22" x 3.8" 57.1 x 55.9 x 9.6 cm SHELF SIZE 22.5" x 20.5" 57.1 x 52.1 Works with EFAS expansion shelf and select Euro Series accessories MODEL EFA31 Audio Rack 22.48" x 20.52" x 30.59" 57.1 x x 77.7 cm TOP SHELF DIMENSIONS 22.48" x 20.5" 57.1 x cm TOP SHELF CAPACITY 80 lbs / kg MIDDLE SHELF DIMENSIONS 22.48" x 20.5" 57.1 x cm MIDDLE SHELF CAPACITY 80 lbs / kg BOTTOM SHELF DIMENSIONS 22.48" x 20.5" 57.1 x cm BOTTOM SHELF CAPACITY 80 lbs / kg MODEL EFP18, EFP12, EFP5 Extended-Height Pillars for audio base (model EFAB) or video stand (model EFAV) EFP18 includes rack rail conversion kit (4 pillars and two rack rail wraps) MODEL EFAVB AV Base & Shelf MODEL EFAVS Audio Expansion Shelf EFP18 EFP12 EFP5 40.5" x 20.45" x 14.18" x x cm TOP SHELF DIMENSIONS 40.50" x 20.45" x cm TOP SHELF CAPACITY 125 lbs / 56.6 kg 40.5" x 20.52" x 5.46" x x cm 125 lbs / 56.6 kg EFR12 Rack rail conversion kit CK2 Caster Kit EFWMC Wire Management Clips MODEL EFAS AV Shelf MODEL EFAB Audio Base 22.48" x19.47" x 8.71" 57.1 x x cm 80 lbs / 36.2 kg 22.48" x 19.48" x 8.71" 57.1 x x cm 125 lbs / 56.6 kg For use with Euro Accessory Model EFP12 10 SANUS COMPONENT SERIES RACK EURO ACCESSORIES SERIES RACKS 28 EURO SERIES ACCESSORIES SANUS COMPONENT SERIES RACK ACCESSORIES 28 11

7 SANUS products are proudly designed and engineered in the USA. We strive to offer you safe products that provide a joyful experience while also enhancing your lifestyle. Visit for details LEARN MORE m.sanus.com SanusSystems SanusSystems Sanus 2015 Milestone AV Technologies, a Pritzker Group Company. All Rights Reserved. SANUS and the SANUS Logo are registered trademarks of Milestone. All other brand names or marks are used for identification purposes and are trademarks of Milestone. All patents are protected under existing designations. Other patents pending. All information and designs contained are proprietary property of Milestone AV and may not be reproduced without express written consent of Milestone AV Technologies. info@sanus.com PHONE FAX