HELIOMAT. Portions dryer with detachable drying containers. Precision plastics resins dryer with documented drying quality

Transcription

1 Gerätebau für Kunststofftechnik Patented solutions to the plastics industry Portions dryer with detachable drying s Precision plastics resins dryer with documented drying quality

2 Application Predrying station to change material quickly station for sampling Portions drying for tiny lots on injection moulding machine Clean room application with hermetically sealed material drying s Dry air/n 2 laboratory application Portions drying station The filled drying boxes are attached to the dedicated docking station each and one of the 12 possible drying programs is started. Flexible predrying station or dryer for tiny material quantities drying station is available with detachable drying s in 0,5 50 liters size. The s are hermetically sealed and can be docked to the drying station by slide system. After the drying time elapsed, the drying s can be detached and transported to the production area by means of a trolley. Basing on the modular construction, the drying station is individually selectable. The option of Micro (M) type with glass drying s (0,5-5,0 liter) or Turbo (T) level with stainless steel drying s (15-50 liter) is possible. A combined module (MT) is also available. Station 2-fold 4-fold 6-fold Container Type 2M / 2T 4M / 4T 6M / 6T Full WINsystem equipment Every single docking station is an independent dryer Dewpoint measurement optionally Plastics data base Energy efficiency control Graphic display, 10 languages selectable Maintenance-free CAN-BUS network for documentation Weekday timer per each docking station Protection against overdrying Control panel with graphic display 1 Monitoring of drying program and alarm 2 Portions drying programs A, B, C 3 User-specific drying programs P1 P9 4 Weekday timer 5 Data base with material table 6 Graphic display Conditioning of compressed air UP 2000 additional dryer

3 Functional principle Trolley After the drying time elapsed, the hermetically sealed drying s can be easily transported to the production area by means of the trolley. Processing machine The drying box, filled with dried material, can be attached to the feeding zone of an injection moulding machine by means of sliding rail. Keeping material dry while processing A steady state dryer unit is placed on the injection moulding machine. The drying box, filled with pre-dried resin, is attached by means of sliding rail. Filling of drying boxes with material The filling from a material is possible manually or using a compressed air based hopper loader, which is placed on cover.

4 Optional equipments Transport 0.5 Liter 1.0 Liter 2.5 Liter 5.0 Liter 15 Liter 30 Liter 50 Liter Trolley drying drying drying drying drying of stainless steel, optimal insulation drying of stainless steel, optimal insulation drying of stainless steel, optimal insulation for optimal transport of drying from the to the production area Dew point Conditioning of compressed air Software Mesh guard Handling Transport Container filling Discharging Dew point measuring precision dew point measurement device continuous control up to -50 C measuring system without drift errors Additional dryer HELIOCONTROL High temperature Steady state JETBOX UP 2000 conditioning of compressed air dew point up to -60 C In PC or Touch Panel version to program, control and document the dryer For glass drying s up to +185 C drying temperature mesh guard for high temperature applications as protection against contact keeping material dry while processing the drying will be attached to JETBOX by means of sliding rail Crane hook Loader Sliding rail one can hang the cover matching to stainless steel the stainless steel drying s drying s by means of the with integrated hook and transport compressed air by indoor crane loader. p rolonged sliding rail with discharge nozzle Sliding system for docking The drying s can be pulled off the docking station by means of the sliding rail system onto the form-fit aligned transport trolley with magnets and transported in the operating area convincing technical equipment. Gerätebau für Kunststofftechnik Over 20 years`experience

5 Convincing technical equipment Dew point measuring Material data base dryer is equipped with an integrated precision dew point measuring device optionally to control the dry air quality up to -50 C, thus enabling an optimal drying result. This measuring system has proved a virtual accuracy in long-time testing. Overdrying protection All important polymer types are included in this data base. The dryer will be optimally adjusted to the selected polymer type. The polymer spedific and flow rate based adjustment makes the drying precise and energy saving. It is, of course, possible to store also user-speficic polymers drying paramaters. Energy efficiency 24h service Upon receipt of notice of failure and clarification of the actual situation with HELIOS service department (Monday 8.00 Friday h), the necessary spare part will be sent to the customer by UPS within 24 h. When the set drying time has passed, the system control reduces the drying temperature and the dry air volume flow to a safe level protecting the material against thermal damaging. The dryer unit protects the material until the next taking. Weekday timer ENERGIE EFFIZIENZ G A R A N T The WINsystem dryers are spending as much compressed air and heating energy only as exactly necessary for the drying task by means of the HELIOS data base, which is optimally adjusting the dryer polymer type specifically, the HELIOS digital pneumatic with its high-precision dry air volume flow adjustment, the exact temperature control and the overdrying protection. This is why HELIOS is able to grant the energy efficiency. Software for documentation I E No need for maintenance WINsystem dryers are maintenancefree generally. Possibly requested spare parts can be easily replaced by the customers. Only the filters have to be replaced precautionary or if required. Calibration service comparison measurement of device Vergleichsmessung in Vorrichtung. Every weekday and single docking station can be easily and individually programmed with the weekday timer. WINsystem dryer units can be interlinked via CAN-BUS. It is possible to program, control and document all the drying units from a PC or IPC touch panel by means of the HELIOCONTROL software. A certified manufacturer s calibration is issued with all WINsystem dryers upon delivery to cover 2 drying temperatures, 3 drying air volume flows and 2 dew point values. This certified calibration can be later made repeatedly either locally or with HELIOS.

6 Technical data 2M Micro 2MT Micro+Turbo 2T Turbo 4M Micro 4T Turbo 6M Micro 6T Number of s Measurements (mm) length Measurements (mm) depth 495 Measurements (mm) height 1465 Total connected load (kw) 0,92 2,02 3,12 1,84 6,24 2,76 9,36 air volume flow max (m³/h) Turbo 2 x 3,6 1 x x 15 2 x 15 4 x 3,6 4 x 15 6 x 3,6 6 x 15 drying capacity max (kg)* 2 x 3 1 x 3 1 x 30 2 x 30 4 x 3 4 x 30 6 x 3 6 x 30 drying temperature max. (C ) 185 C drying system released compressed air/n 2 heating power (Watt) x x x x 1500 dew point drying medium (C ) -20 / -60** compressed air connection (bar) 6 electric connection 400V / 3Ph / * at bulk density 0,6 kg/dm³, **with an optional equipment UP /60 Hz WINsystem basic station compressed air based dry air dryer fully equipped and with patented HELIOS digital pneumatic available at each docking station dew point measuring system from +50 C to -50 C with alarm function (optionally) max. dry air volume flow 60 l/min or 250 l/min size and material based dryer settings drying temperature C 3 portions drying programs A, B, C 9 user-specific drying programs programmable drying sizes 0.5 / 1.0 / 2.5 / 5.0 l iters and 15 / 30 / 50 liter heating power 0,4 kw or 1,5 kw documentation and monitoring of all parameters and settings on LCD display monitoring of drying temperature and drying time DUE/ACTUAL as well as Programs A, B, C or user-specific programs P1 P9 monitoring of compressed air flow rate, heating power and total energy consumption event memory for 64 events certified manufacturer s calibration to cover 2 drying temperatures, 3 dry air volume flows and 2 dew point values HELIOS polymers resins data base compatible with HELIOCONTROL WINsystem, Oktober 2010 All HELIOS dryer products are covered by international patents DISCHARCHING CONVEYING DRYING Version HELIOS GmbH Hechtseestraße 8 de Rosenheim Telefon: +49 (0) / Telefax: +49 (0) / info@helios-systems.de -