Manual. Electro Plus. Use and Installation ELECTRIC TOWEL HEATER

Size: px

Start display at page:

Download "Manual. Electro Plus. Use and Installation ELECTRIC TOWEL HEATER"

Magnus Dawson
6 years ago
Views:

1 Manual Use and Installation Electro Plus ELECTRIC TOWEL HEATER ISTR_BAEPLS Rev. 0/0/0

2 THESE INSTRUCTIONS MUST BE FOLLOWED CORRECTLY TO ENSURE THE RADIATOR SAFETY. THEREFORE, IT IS STRONGLY RECOMMENDED TO READ THEM PRIOR TO INSTALLATION AND KEEP THEM FOR FUTURE REFERENCE. IF YOU ARE UNSURE OF THE RADIATOR INSTALLATION, ASK FOR ASSISTANCE FROM A QUALIFIED TECHNICIAN. Function Stand-by mode LCD displays only the decimal dot symbol blinking, no temperature regulation, load output is olways OFF. Push Stand-by button to power up thermostat Clock mode LCD displays Clock mode symbol, current time and day, and display current daily program with time slot blinking. The temperature regulated is function of daily program, to change TH and TL temperatures switch between modes using function button Confort mode LCD displays Comfort symbol and TH temperature. To change temperature of comfort use or push buttons. The temperature regulated in the room is TH Night mode LCD displays Night symbol and TL temperature. To change temperature of comfort use or push buttons. The temperature regulated in the room is TL

3 Function Antifreeze mode LCD displays Antifreeze symbol and the antifreeze temperature regulated to.0 C Remote mode (CLASS II product) LCD displays the Remote icon and the remote icon depending from remote command. (Example with TH = 0 C) ECO: LCD displays night icon and TH -.0 C temperature Night: LCD displays night icon and TH -. C temperature. Antifreeze: LCD displays Antifreeze icon and.0 C temperature ECO: LCD displays night icon and TH -.0 C temperature. Stop: LCD displays and the heating is disabled

4 Function Forced mode LCD displays H and activate load full power for hours Clock programming mode In clock mode push button until hours digit start blinking. Use mode button to select hours, minute and days. Use or to modify. After second of inactivity return to Clock mode

5 Function Daily program set-up function In Clock mode, push standby + function button until time start blinking. Use function button to select the day of week to program Use to set the time slot to TH and jump to next time slot, and to set the time slot to TL and jump to next time slot. Pushing for seconds, activate copy function, the actual daily schedule for the next day, and display it. After second of inactivity return to clock mode

6 Function Keyboard lock function Push and at he same time for seconds enable/disable keyboard lock function Fault mode LCD displays Err on, temperature Sensor fault or Daily program memory error. Please contact customer service

7 Safet y instructions Should damages be caused from breach of these regulations, the manufacturer s guarantee shall be invalidated. Do not use the appliance outdoors. Your appliance is intended for domestic use. It may not be used for other purposes. If the appliance has been dropped, has been damaged or does not function correctly, do not use it and ensure that the appliance power supply has been disconnected (fuse or switch). Do not dismantle the appliance. A poorly-repaired appliance can cause risks for the user. Contact your retailer for any problem. If the power lead has been damaged, it must be replaced by the manufacturer, after-sales service or another professional to avoid all danger. This appliance is not suitable for use by people (including children) with reduced physical, sensory or mental capacities, or by people without specific experience and knowledge, without prejudice to their being able to make use, through a person responsible for their safety, of monitoring or preliminary instructions on the appliance use. Children should be monitored to ensure that they do not play with the appliance. Warning: In order to avoid any hazard to young children, it is recommended to install the unit so that the lower radiant bar is at least 00 mm above the floor. Preparing to install Before connecting the radiator, disconnect the power supply using the general switch. This radiator is a class II appliance. As such, it may be installed in all rooms of the house, including in protection volumes and of a bathroom (IP). The heating appliance must be installed in such a way that the switches and other control devices cannot be touched by someone in the bath or shower (in compliance with standard NF C-00). The radiator must not be installed beneath a socket. The radiator must be installed at least cm away from all obstacles (shelves, curtains, furniture, etc.). The power circuit of this appliance must include an allpole circuit breaking device (in compliance with standard NF C-00). Volume Volume 0 cm cm Volume 0 cm 0 cm Control panel 00 cm

8 Power supply and electrical connections The power supply connection must be performed by a qualified professional technician. In accordance with the rules in force, the power of the towel heater must be protected by an RCD of 0 ma and an overcurrent protection device, suitable to the characteristics of the connection line. Before using the appliance the first time, check that the voltage used corresponds to that specified on the appliance. This radiator is a class II appliance (double electrical insulation). Earth connection is prohibited. Connection of the three wires must take place in an electrical junction box compliant with current regulations. È vietato utilizzare una spina per il collegamento ad una presa. The pilot wire must be disconnected if not in use. Alimentazione monofase 0 V~ 0Hz : Single-phase power supply 0 V~ ±0% 0Hz: Blue wire: Neutral Brown wire: Live Black wire: Pilot Wire Fixing to the wall Important: Observe a minimum of 0 mm between the bottom of the towel heater and the floor. L NO Part number A H L L BAEPLS BAEPLS BAEPLS BAEPLS H Units expressed in millimeters. A L 8

9 Fixing description Ø 0 A A 9

10 Range and dimensions Part number Power (white) Power (chrome) Height with thermostat Width Depth Number of tubes Number of towelholder slots BAEPLS W - mm 00 mm 80 mm BAEPLS W 00 W 988 mm 00 mm 80 mm 8 BAEPLS000 0 W 00 W mm 00 mm 80 mm BAEPLS W 0 W 8 mm 00 mm 80 mm 0 Width Height with thermostat Depth 0

11 Technical specifications Power supply: 0V AC +0% -0% 0 Hz. Storage temperature: from -0 C to +0 C. Safety: Class II according to EN0-, protection class IP. heating body: steel. Thermostat: Class II according to EN0-. Maximum power 000 W, resistive load. IP: the control box must be properly tightened (tightening torque required: from 0, to 0, Nm) and fitted with the original joint. Electronic PID (proportional plus integral plus derivative control) temperature regulation using a microprocessor. -order pilot wire. Set-point temperature adjustment from 8 a 0 C. Manufacturer: DELTACALOR The symbol on the product indicates the obligation to dispose of it, at the end of its working life, with a specialised collection centre, in compliance with Directive WEEE 00/9/EC. Should you choose to replace it, you may return the old appliance to the distributor. This product is not ordinary household waste. By disposing of the product appropriately at the end of its working life, we can protect the environment and limit use of its natural resources. Declaration of conformity: We hereby declare, under our own responsibility, that the products presented in these instructions comply with all basic requirements of the Low Voltage Directives 00/9/EC and EMC 00/08/EC and RoHS 00/9/EC.

12 DELTACALOR s.r.l. Via Mazzini 80 Calolziocorte Lecco ITALY

INSTALLATION AND MAINTENANCE MANUAL BLITZ FD_

INSTALLATION AND MAINTENANCE MANUAL IST 03 F 017-01 BLITZ FD_ Aluminium electric radiators with heat transfer fluid GB Dear customer, Thank you for choosing our product. Read this manual carefully before