Cata l o g u e 2011/2012 Bar Tops and Refrigerated Bar Counters

Transcription

1 Cata l o g u e 20/202 Bar Tops and Refrigerated Bar Counters worldwide patented closure system simply the Best

2 How to find us directions/street map Coming from the south......take on the highway A the exit Vechta. Follow the signs to Goldenstedt. In Goldenstedt please drive in direction of Barnstorf (Diepholz); now you are on the Barnstorfer Straße. After approx.,5 km there is the Hagolastraße on the left side. Coming from the north... take on the highway A the exit Wildeshausen/Nord, follow the signs to Goldenstedt. Please drive through Goldenstedt until you reach the crossing road Vechta-Twistringen. There you turn right and immediately left in direction of Barnstorf (Diepholz); now you are on the Barnstorfer Straße. After approx.,5 km there is the Hagolastraße on the left side. Coming from the east take the B5 (federal highway Osnabrück-Diepholz- Bremen) to Barnstorf. Follow the signs to Goldenstedt; now you are on the Barnstorfer Straße. After approx. 4,5 km there is the Hagolastraße on the right side.

3 TABLE OF CONTENTS certificate/welcome message of the general management Pages 2/ Discount Groups Register introduction/patented closure system 4/5 contact persons/telephone exchange, sales department, service department 6 general delivery and payment conditions 7 abbreviations used in this catalogue 8 keyword index 9 - classification of discount groups bar tops, First Class bar tops (HSD) bar cover tops with ribbed drainage surface and accessory (HSA) 2 A/ - A/6 A/7 - A/4 A top drip trays (HAS) built-in drip trays top side assembly (HES) built-in drip trays bottom side assembly (HUS) prism grids (HPR) prism drip plates, shelf bracket rails and shelf brackets (HPL) prism deco plates (HPD) tap columns, tap units; accessory (HSS) bar counter comparison, technical details, possible bottle indications per roll-out drawer refrigerated bar counters, plug-in, for beverage and barrel cooling, accessory refrigerated bar counters, plug-in, for the substructure (HKT-GN), for cooling of bottles, sauces, dressings and salads in GN-bowls etc.; accessory compact bar counters, refrigeration prepared (HCT-V) for beverage and barrel cooling; accessory compact bar counters, refrigeration prepared (HCT-V-GN) for cooling of beverage crates and bottles, sauces and dressings in GN-bowls, baking tins etc.; accessory neutral bar counters (HTT) non-refrigerated modules with roll-out drawers, tilting waste bins, cash registers, drawers, sink substructures etc. cocktail station (HCS), non-refrigerated modules for glasses, dishwasher racks for glasses, roll-out drawers, bottle stairs, insulated tubs for crushed ice and ice cubes; accessory warming-up cabinets (HWS) for plates, cups etc.; optional with roll-out drawers or wing doors system cooking counter (HSK), different hot plates (hobs), e. g. Ceran, induction and grill; accessory First Class (HKT) Business Class (HKT) Economy Class (HKT) Global Class (HKT) First Class (HCT-V) Business Class (HCT-V) Economy Class (HCT-V) First Class Business Class Business Class First Class Business Class B/ - B/4 /9 C/ - C/4 /9 D/ - D/8 2 E/ - E/0 E/ - E/22 E/2 - E/48 E/49 - E/62 E/6 - E/68 F/ - F/6 G/ - G/8 G/9 - G/8 G/9 - G/26 H/ - H/0 I/ - I/8 J/ - J/0 K/ - K/6 B C D E F G H I J K L/ - L/4 L barrel coolers, plug-in (HFB) waste bin coolers, plug-in (HAK) M/ - M/4 M/5 - M/8 4 M valid from April 20 NIROSTA -folding bars (HNK) mobile refrigerated bar counters (HKTM) mobile neutral bar counters catering technology accessory (HGZ) glass washing machines, ice cube machines, deep-freezing boxes copy and facsimile message for your brochure and price list requirements notes and memos N/ - N/4 N/5 - N/8 N/9 - N/2 9 O/ - O/6 7 P/ - P/4 N O P

4

5 The power and force are in the quality. F. Nietzsche Dear Customer, Simply the best! This statement reduces the largest part of our philosophy to three significant words. To offer the best is our incentive since HAGOLA has been founded. This motivation is being lived by people who are working with all their experience, enthusiasm and last but not least passion for producing these high-quality products for you. The best is not only characterized by quality but also by keeping agreed delivery times. A logistically matured system enables to guarantee the extremely short delivery times. This starts with a short-term quotation processing and ends with on-time deliveries. But to offer the best demands more. Our service partner network guarantees urgent help if a troubleshooting shall indeed be necessary due to technical problems. For offering the best to your customer, make use of our experience, competence and knowledge. Stefan Rakers Managing Director Elke Meyer Managing Director valid from April 20

6 Catalogue Bar Tops and Refrigerated Bar Counters 20/202 The extensive product groups of HAGOLA are categorized in the following catalogues: - Bar Tops and Refrigerated Bar Counters (available in German and English) - Display Cases and Cooling Tubs (available in German and English) - Stainless Steel and Brass Components (only available in German) The present catalogue is including the sections Bar Tops and Refrigerated Bar Counters. Next to our listed standard articles, also the production of nearly all custom-made designs is possible and this on account of our long experience in this business. For order please use the fax order form on page P/. In addition, you find on pages P/2 and P/ a fax request form for further information material and samples. All HAGOLA-catalogues are based on the General Delivery and Payment Conditions (refer to page 7) and all mentioned prices are on basis EXW Goldenstedt/Germany and are plus packaging charges and VAT (value-added-tax). Furthermore, please note that this catalogues cancels and replaces all former price lists and catalogues. Your HAGOLA-team valid from April 20 4

7 Worldwide, patented and unique closure system Since October 200, the worldwide unique closure system for refrigerated and climate cabinets, named HAGOLA gripping closure, is the new HAGOLA-standard and offers numerous significant advantages. Shapely and ergonomic handles either in black colour or chrome effect are always positioned at the highest point of the drawer or door fronts which provides for an easy and comfortable handling. The new gripping closure is closing nearly noiseless and reliably even when it is used very dynamically. Stylish door and drawer fronts with insulated glazing are not only offering a free and unobstructed view on the cooled merchandise but also a more beautiful visual appearance of the bar counter front. The new double-hollow-chamber-gaskets with the smooth and hygienic surfaces are very easy to clean, extremely robust and really longlasting. Due to the high insulation values in comparison to the common magnet valves that contain many wrinkles these double-hollowchamber gaskets are especially energy-saving. Start into the future with HAGOLA and let us convince you! valid from April 20 You decide for the best when you choose HAGOLA because only with the best you can demonstrate your superiority! 5

8 Abbreviations used in this catalogue A Ampère acc. to according to add. additional arr. arranged BC Business Class cap. capacity cash reg. cash register CF Cchlorofluorocarbon circ. circulating CNS chromium nickel steel comp. compartment constr. construction construct. construction DC direct current discount group DIN German Institute for Standardization (Deutsches Institut für Normung e.v.) downw. downward EC Economy Class eff. efficient f. for FC First Class GN Gastronorm HAK HAGOLA-waste bin coolers HAS HAGOLA-drip trays HCS HAGOLA-cocktail station HCT-V HAGOLA-compact counter, refrigeration prepared HD high pressure HES HAGOLA-built-in drip trays (top side assembly) HFB HAGOLA-barrel coolers HFT HAGOLA-display cases HKP HAGOLA-contact cooling plates HKT HAGOLA-refrigerated bar counters HKT-GN HAGOLA-refrigerated bar counters for the substructure (undercounter) HKTM HAGOLA-mobile refrigerated bar counters HNK HAGOLA-NIROSTA-folding bars HPD HAGOLA-prism deco plates HPL HAGOLA-prism drip plates HPR HAGOLA-prism grids HSA HAGOLA-bar cover tops HSD HAGOLA-bar tops HSK HAGOLA-system cooking counters HSS HAGOLA-tap columns HTT HAGOLA-neutral bar counters HUS HAGOLA-built-in drip trays (bottom side assembly) HWS HAGOLA-warming-up cabinets Hz Hertz illustr. illustration incl. including install. installation left. s.left side max. maximal / maximum PE polyethylene PU polyurethane PVC polyvinyl chloride refr. refrigerated refrig. refrigerated right s. right side sfc. surface surrdg. surrounding temp. temperature tilt. tilting V Volt VA Voltampere VT vaporization temperature W x H x D width x height x depth W Watt w. with w/o without 8 valid from April 20

9 Keyword Index Register Page Aadapting piece I I/0, I/2, I/6 attachment board E E/47 Bbar cover tops (HSA) A A/7 A/ bar tops A A/ A/4 bar tops (HSD) A A/ A/6 bar board E, J E/47, J/9 barrel coolers M M/ M/ barrel edge protection E, G E/62, G/7, G/8 base rails G, I G/6, G/7, G/24, I/0, I/2, I/6 basin mixer A, E A/2, E/60 beer pipe cleaning unit D D/6 blind rosette D D/5 built-in drip trays (bottom side assembly) B B/ B/ built-in drip trays (top side assembly) B B/ B/ built-in modules for deep-freezing boxes O O/5 built-in modules for glass washing machines (Hobart) O O/ built-in modules for ice cube machines (Wessamat and Hoshizaki) O O/5 Ccare product A, D, E, F, H, N A/4, D/6, E/62, F/5, H/0, N/7, N/ care spray for stainless steel A, D, E, F, H, N A/4, D/6, E/62, F/5, H/0, N/7, N/ chopping board A, E A/4, E/62 circulating air refrigeration for tap columns D D/, D/4 cleaning adapter D D/6 cleaning brush A, E, F, H, N A/, E/6, F/5, H/0, N/7, N/ CO 2 -bottles D D/7 cocktail station J J/ J/9 cold water faucets A, E, N A/2, E/60, N/ comfort control unit G, H G/6, G/7, H/0 compact bar counters G, H G/ G/25, H/ H/0 condensate evaporation G G/6, G/7, G/24 cooking counters L L/ L/ cooling unit G G/6 cylinder lock E, G, I, K E/62, E/67, G/25, I/0, I/2, I/6, K/ K/6 DDC power supply E, F, G, H E/62, F/5, G/7, H/0 valid from April 20 deep-freezing boxes O O/5 depression rinsing A, B, E A/2, B/, E/22, E/4, E/46 detachable grid E, F, G, H E/82, F/5, G/7, H/0 dispenser A A/2 dispensing units D D/6 distance base for tap cocks D D/ distance cores D D/5 downpipes for tap cocks D D/5 drain connections A, E, N A/, E/6, N/ drain hose A, B, E, N A/, B/, E/6, N/ drain set A, E, N A/, E/6, N/ drip depression rinsing A, B, E A/2, B/, E/22, E/4, E/46 9

10 Keyword Index Register Page Eelectronic control unit G, H G/6, G/7, G/24, H/0 Ffaceplates I I/0, I/2, I/6 fitting piece I I/0, I/2, I/6 folding bars N N/ N/ foot rails / hand rails J J/9 GGastronorm-refrigerated bar counters F F/ F/5 glass pressure rinser A, E A/2, E/22, E/4, E/46 glass rinsing device A, E, N A/, E/6, N/7, N/ glass washing machines O O/ O/4 grid shelf E, F, G, H E/62, F/5, G/7, G/8, G/25, H/0 Hhand rails / foot rails J J/9 hang-in rack (speed rail) J J/9 hot plates (hobs) L L/2, L/ I ice cube machines O O/5 illumination (underneath the bar board) J J/9 ingredients board J J/9 interior lighting E, F, G, H E/62, F/5, G/7, G/8, G/25, H/0 intermediate grid shelf E, F, G, H E/62, F/5, G/7, G/8, G/25, H/0 L label display E E/62 LED-lighting E E/62, E/67 locking for gripping closure E, F, G, H E/62, F/5, G/7, G/8, H/0 Mmagnet valve H H/0 manometer D, E, I D/7, E/6, I/0 mixer tap A, E A/2, E/60 mobile bar counters N N/5 N/ 0 N neutral bar counters I I/ I/8 O openings (breachs) in bar tops A, E A/4, E/62 valid from April 20

11 Keyword Index Register Page Ppanellings E E/47 panels I I/0, I/2, I/6 permanent illumination E, F, G E/62, F/5, G/7, G/8, G/25 pop-up set A, E, N A/, E/6, N/ pressure gauge D, E, I D/7, E/6, I/0 prism deco plates C C/, C/2, C/4 prism drip plates for sinks A, E A/, E/60 prism drip plates C C/ C/ prism grids C C/ C/ Rrefrigerated bar counters for the substructure F F/ F/5 refrigerated bar counters, especially for draught beer E E/5 E/46 refrigerated bar counters, plug-in versions E, F E/ F/5 ring spanner D, N D/7, N/7 rosettes for tap cocks D D/5 Sscrew couplings G G/6 sensor fitting A, E A/2, E/60 separating rods E, F, G, H E/62, F/5, G/7, G/8, G/25, H/0 shelf bracket /shelf bracket bar C C/ single lever faucet with sprinkler A, E A/2, E/60 sink substructures I I/ I/0 sink A A/ speed rail (hang-in rack) J J/9 stainless steel care spray A, D, E, F, H, N A/4, D/6, E/62, F/5, H/0, N/7, N/ stop cock A, E A/2, E/22, E/4, E/46 support rails E, F, G, H E/47, E/62, F/5, G/7, G/8, G/25, H/ Ttap cocks D D/5 tap columns D D/ D/4 tools for assembly of the basin mixer A, E A/, E/62 top drip trays B B/ B/ towel rail A, E A/, E/6 transport carts E E/6 Uundercounters F F/ F/5 valid from April 20 Wwall cupboard for glasses E E/47 warming-up cabinet K K/ K/6 waste bin box I I/6, I/22, I/29, I/5 waste bin cooler M M/5 M/7 water pressure reducer A A/2 work top (wood) E E/47

12 Classification of discount groups discount group bar tops, built-in drip trays, top drip trays HAGOLA-work tops HAGOLA-drip trays HAGOLA-drip trays (top side assembly) HAGOLA-prism deco plates HAGOLA-prism drip plates HAGOLA-prism grids HAGOLA-bar tops HAGOLA-bar cover tops HAGOLA-drip trays (bottom side assembly) Accessories discount group 6 stainless steel and brass components HAGOLA-stainless steel components HAGOLA-brass components discount group 7 accessories/trading goods HAGOLA-catering supplies (ice cube machines, glass washing machines, deep-freezing-box, accessories) discount group 2 tap columns HAGOLA-tap columns discount group 8 display cases HAGOLA-display cases (stand module) discount group bar counters HAGOLA-cocktail stations HAGOLA-compact counters HAGOLA-compact counters (refrigeration technique prepared) HAGOLA-refrigerated bar counters HAGOLA-refrigerated bar counters for the substructure (undercounter) HAGOLA-system cooking counter HAGOLA-neutral bar counters HAGOLA-warming-up cabinets Accessories discount group 4 barrel coolers, waste bin coolers HAGOLA-waste bin coolers HAGOLA-barrel coolers discount group 9 brewery articles HAGOLA-brewery articles (drip trays, folding bars, mobile bars) discount group 0 display cases HAGOLA-display cases (built-in module) Products of the discount group(s):,2,,4,7,9 are included in this catalogue.,5,8,0 are included in the separate catalogue Display Cases and Cooling Tubs. discount group 5 cooling tubs HAGOLA-contact cooling plates HAGOLA-cooling tubs HAGOLA-NIROSTA-tubs HAGOLA-showcase HAGOLA-deep-freezing tanks HAGOLA-circulating air cooling tubs 6 are included in the separate catalogue for stainless steel- and brass components Edelstahl- und Messing-Exklusiv-Programm (only available in German language). valid from April 20 2

13 HAGOLA-bar tops (HSD) First Class -bar tops Description Bar tops, available in several lengths ex warehouse, individual and custom-made bar tops on request A bar top First Class Version bar top First Class in NIROSTA (.40) brushed surface dispensing bed and drip depression incl. prism drip plates* substructure: - particle board V-00/solid wood - optional with or 2 sink(s) positioned either on left or right side - wall panel (660 mm deep) or surrounding downward edge (700 mm deep) glass pressure rinser or drip depression rinsing optional available stainless steel overflow pipe and valve as standard equipment for a sink with the dimension 00 x 500 x 00 mm safe hygienic working due to minimised distances to the sinks and to the waiter side *Prism drip plates are protected by European patent. valid from July 20 A/

14 HAGOLA-bar tops (HSD) HAGOLA-bar cover tops (HSA) First Class -bar tops Individual and custom-made bar tops on request A A/2 valid from July 20

15 HAGOLA-bar tops (HSD) First Class -bar tops Product advantages overflow pipe and valve, both in stainless steel larger working and rinsing area due to minimised distances A beer froth drains off, hygiene-safe no water markings, no sweating of the glasses no splashing, brilliant visual appearance drip depression rinsing for cleaning of the depression, no sticking of beverage residues for the mobile sector prism drip plate* sucker valid from July 20 sucker (legal registered design) for fixing the prism drip plates (only necessary for mobile sector) *Prism drip plates are protected by European patent. A/

16 HAGOLA-bar tops (HSD) First Class -bar tops Models / only available with sink on left side A 660/ / / / / / / / / Remark These First Class standard bar tops are also available with a fitted glass pressure rinser, with a drip depression rinsing, with a wall panel (660 mm deep) or surrounding downward edge (700 mm deep) or vice versa. A/4 660/ valid from July 20

17 HAGOLA-bar tops (HSD) First Class -bar tops bar tops with prism drip plates, stainless steel overflow pipe and stainless steel valve, with sink First Class -bar top 50 x 50 x 700 mm hsd57a First Class -bar top 550 x 50 x 660 mm hsd556w First Class -bar top 800 x 50 x 700 mm hsd807a2 hsd57a hsd556w hsd556w2 hsd557a hsd557a2 hsd606w hsd606w2 hsd607a hsd607a2 hsd806w hsd806w2 hsd807a hsd807a2 hsd206w hsd206w4 hsd207a hsd207a4 hsd2656w hsd2656w2 hsd2657a hsd2657a2 NIROSTA (.40) brushed surface 50 x 50 x 700 mm, surrounding downward edge, sink left side 550 x 50 x 660 mm, wall panel 7 mm, sink left side 550 x 50 x 660 mm, wall panel 7 mm, sink right side 550 x 50 x 700 mm, surrounding downward edge, sink left side 550 x 50 x 700 mm, surrounding downward edge, sink right side 600 x 50 x 660 mm, wall panel 7 mm, sink left side 600 x 50 x 660 mm, wall panel 7 mm, sink right side 600 x 50 x 700 mm, surrounding downward edge, sink left side 600 x 50 x 700 mm, surrounding downward edge, sink right side 800 x 50 x 660 mm, wall panel 7 mm, sink left side 800 x 50 x 660 mm, wall panel 7 mm, sink right side 800 x 50 x 700 mm, surrounding downward edge, sink left side 800 x 50 x 700 mm, surrounding downward edge, sink right side 200 x 50 x 660 mm, wall panel 7 mm, sink left side 200 x 50 x 660 mm, wall panel 7 mm, sink right side 200 x 50 x 700 mm, surrounding downward edge, sink left side 200 x 50 x 700 mm, surrounding downward edge, sink right side 2650 x 50 x 660 mm, wall panel 7 mm, sink left side 2650 x 50 x 660 mm, wall panel 7 mm, sink right side 2650 x 50 x 700 mm, surrounding downward edge, sink left side 2650 x 50 x 700 mm, surrounding downward edge, sink right side A bar tops with prism drip plates, stainless steel overflow pipe and stainless steel valve, with 2 sinks First Class -bar top 950 x 50 x 660 mm hsd956w hsd956w hsd956w2 hsd957a hsd957a2 hsd206w hsd206w2 hsd207a hsd207a2 hsd2506w hsd2506w2 hsd2507a hsd2507a2 hsd056w hsd056w2 hsd057a hsd057a2 NIROSTA (.40) brushed surface 950 x 50 x 660 mm, wall panel 7 mm, sink left side 950 x 50 x 660 mm, wall panel 7 mm, sink right side 950 x 50 x 700 mm, surrounding downward edge, sink left side 950 x 50 x 700 mm, surrounding downward edge, sink right side 200 x 50 x 660 mm, wall panel 7 mm, sink left side 200 x 50 x 660 mm, wall panel 7 mm, sink right side 200 x 50 x 700 mm, surrounding downward edge, sink left side 200 x 50 x 700 mm, surrounding downward edge, sink right side 2500 x 50 x 660 mm, wall panel 7 mm, sink left side 2500 x 50 x 660 mm, wall panel 7 mm, sink right side 2500 x 50 x 700 mm, surrounding downward edge, sink left side 2500 x 50 x 700 mm, surrounding downward edge, sink right side 050 x 50 x 660 mm, wall panel 7 mm, sink left side 050 x 50 x 660 mm, wall panel 7 mm, sink right side 050 x 50 x 700 mm, surrounding downward edge, sink left side 050 x 50 x 700 mm, surrounding downward edge, sink right side valid from July 20 First Class -bar top 2550 x 50 x 700 mm with work surface hsd2557a2 First Class -bar top 2550 x 50 x 660 mm with basket depression hsd2556w5 hsd2556w hsd2556w2 hsd2557a hsd2557a2 hsd2556w5 hsd2556w6 hsd2557a5 hsd2557a6 hsd006w hsd006w2 hsd007a hsd007a2 hsd006w5 hsd006w6 hsd007a5 hsd007a6 NIROSTA (.40) brushed surface, with working surface or with depression for dish washer baskets 2550 x 50 x 660 mm, wall panel 7 mm, sink left side, work surface 2550 x 50 x 660 mm, wall panel 7 mm, sink right side, work surface 2550 x 50 x 700 mm, surrdg. downw. edge, sink left s., work surface 2550 x 50 x 700 mm, surrdg. downw. edge, sink right s., work surface 2550 x 50 x 660 mm, wall panel 7 mm, sink left s., w. basket depression 2550 x 50 x 660 mm, wall panel 7 mm, sink right s., w. basket depression 2550 x 50 x 700 mm, surrdg. downw. edge, sink left s., w. basket depression 2550 x 50 x 700 mm, surrdg. downw. edge, sink right s., w. basket depression 000 x 50 x 660 mm, wall panel 7 mm, sink left side, work surface 000 x 50 x 660 mm, wall panel 7 mm, sink right side, work surface 000 x 50 x 700 mm, surrdg. downw. edge, sink left s., work surface 000 x 50 x 700 mm, surrdg. downw. edge, sink right s., work surface 000 x 50 x 660 mm, wall panel 7 mm, sink left s., w. basket depression 000 x 50 x 660 mm, wall panel 7 mm, sink right s., w. basket depression 000 x 50 x 700 mm, surrdg. downw. edge, sink left s., w. basket depression 000 x 50 x 700 mm, surrdg. downw. edge, sink right s., w. basket depression For accessories, please refer to pages A/2 - A/4 (accessory for bar tops, bar cover tops) A/5

18 HAGOLA-bar tops (HSD) First Class -bar tops bar tops with prism drip plates, stainless steel overflow pipe and stainless steel valve, with sink and installed glass pressure rinser A First Class -bar top 50 x 50 x 700 mm hsd57a2 First Class -bar top 550 x 50 x 660 mm hsd556w First Class -bar top 800 x 50 x 700 mm hsd807a4 hsd57a2 hsd556w hsd556w4 hsd557a hsd557a4 hsd606w hsd606w4 hsd607a hsd607a4 hsd806w hsd806w4 hsd807a hsd807a4 hsd206w7 hsd206w8 hsd207a7 hsd207a8 hsd2656w hsd2656w4 hsd2657a hsd2657a4 NIROSTA (.40) brushed surface 50 x 50 x 700 mm, surrounding downward edge, sink left side 550 x 50 x 660 mm, wall panel 7 mm, sink left side 550 x 50 x 660 mm, wall panel 7 mm, sink right side 550 x 50 x 700 mm, surrounding downward edge, sink left side 550 x 50 x 700 mm, surrounding downward edge, sink right side 600 x 50 x 660 mm, wall panel 7 mm, sink left side 600 x 50 x 660 mm, wall panel 7 mm, sink right side 600 x 50 x 700 mm, surrounding downward edge, sink left side 600 x 50 x 700 mm, surrounding downward edge, sink right side 800 x 50 x 660 mm, wall panel 7 mm, sink left side 800 x 50 x 660 mm, wall panel 7 mm, sink right side 800 x 50 x 700 mm, surrounding downward edge, sink left side 800 x 50 x 700 mm, surrounding downward edge, sink right side 200 x 50 x 660 mm, wall panel 7 mm, sink left side 200 x 50 x 660 mm, wall panel 7 mm, sink right side 200 x 50 x 700 mm, surrounding downward edge, sink left side 200 x 50 x 700 mm, surrounding downward edge, sink right side 2650 x 50 x 660 mm, wall panel 7 mm, sink left side 2650 x 50 x 660 mm, wall panel 7 mm, sink right side 2650 x 50 x 700 mm, surrounding downward edge, sink left side 2650 x 50 x 700 mm, surrounding downward edge, sink right side bar tops with prism drip plates, stainless steel overflow pipe and stainless steel valve, with 2 sinks and installed glass pressure rinser First Class -bar top 950 x 50 x 660 mm hsd956w hsd956w hsd956w4 hsd957a hsd957a4 hsd206w5 hsd206w6 hsd207a5 hsd207a6 hsd2506w hsd2506w4 hsd2507a hsd2507a4 hsd056w hsd056w4 hsd057a hsd057a4 NIROSTA (.40) brushed surface 950 x 50 x 660 mm, wall panel 7 mm, sink left side 950 x 50 x 660 mm, wall panel 7 mm, sink right side 950 x 50 x 700 mm, surrounding downward edge, sink left side 950 x 50 x 700 mm, surrounding downward edge, sink right side 200 x 50 x 660 mm, wall panel 7 mm, sink left side 200 x 50 x 660 mm, wall panel 7 mm, sink right side 200 x 50 x 700 mm, surrounding downward edge, sink left side 200 x 50 x 700 mm, surrounding downward edge, sink right side 2500 x 50 x 660 mm, wall panel 7 mm, sink left side 2500 x 50 x 660 mm, wall panel 7 mm, sink right side 2500 x 50 x 700 mm, surrounding downward edge, sink left side 2500 x 50 x 700 mm, surrounding downward edge, sink right side 050 x 50 x 660 mm, wall panel 7 mm, sink left side 050 x 50 x 660 mm, wall panel 7 mm, sink right side 050 x 50 x 700 mm, surrounding downward edge, sink left side 050 x 50 x 700 mm, surrounding downward edge, sink right side First Class -bar top 2550 x 50 x 700 mm with work surface hsd2557a4 First Class -bar top 2550 x 50 x 660 mm with add. basket depression hsd2556w7 A/6 hsd2556w hsd2556w4 hsd2557a hsd2557a4 hsd2556w7 hsd2556w8 hsd2557a7 hsd2557a8 hsd006w hsd006w4 hsd007a hsd007a4 hsd006w7 hsd006w8 hsd007a7 hsd007a8 NIROSTA (.40) brushed surface, with working surface or with depression for dish washer baskets 2550 x 50 x 660 mm, wall panel 7 mm, sink left side, work surface 2550 x 50 x 660 mm, wall panel 7 mm, sink right side, work surface 2550 x 50 x 700 mm, surrdg. downw. edge, sink left s., work surface 2550 x 50 x 700 mm, surrdg. downw. edge, sink right s., work surface 2550 x 50 x 660 mm, wall panel 7 mm, sink left s., w. basket depression 2550 x 50 x 660 mm, wall panel 7 mm, sink right s., w. basket depression 2550 x 50 x 700 mm, surrdg. downw. edge, sink left s., w. basket depression 2550 x 50 x 700 mm, surrdg. downw. edge, sink right s., w. basket depression 000 x 50 x 660 mm, wall panel 7 mm, sink left side, work surface 000 x 50 x 660 mm, wall panel 7 mm, sink right side, work surface 000 x 50 x 700 mm, surrdg. downw. edge, sink left s., work surface 000 x 50 x 700 mm, surrdg. downw. edge, sink right s., work surface 000 x 50 x 660 mm, wall panel 7 mm, sink left s., w. basket depression 000 x 50 x 660 mm, wall panel 7 mm, sink right s., w. basket depression 000 x 50 x 700 mm, surrdg. downw. edge, sink left s., w. basket depression 000 x 50 x 700 mm, surrdg. downw. edge, sink right s., w. basket depression For accessories, please refer to pages A/2 - A/4 (accessory for bar tops, bar cover tops) valid from July 20

19 HAGOLA-bar cover tops (HSA) bar cover tops with ribbed drainage surface Description Bar cover tops, available in several lengths ex warehouse, individual and custom-made bar tops on request A bar cover top Version bar cover top in NIROSTA (.40) brushed surface lowered bulge border as surrounding drainage groove ribbed drainage surface with column base substructure: - particle board V-00/solid wood - optional with or 2 sink(s) positioned either on left or right side - wall panel (660 mm deep) or surrounding downward edge (700 mm deep) glass pressure rinser or waste water depression optional available stainless steel overflow pipe and valve as standard equipment for a sink with the dimension 00 x 500 x 00 mm valid from July 20 A/7

20 HAGOLA-bar cover tops (HSA) bar cover tops with ribbed drainage surface Individual custom-made products on request A A/8 valid from July 20

21 HAGOLA-bar cover tops (HSA) bar cover tops with ribbed drainage surface Yesterday Today A larger work and rinsing surface Product advantages glass pressure rinser waste water depression overflow pipe and valve, both in stainless steel lowered bulge border with surrounding downward edge and drainage groove valid from July 20 larger work and rinsing area due to minimised distances, no more wiping necessary A/9

22 HAGOLA-bar cover tops (HSA) bar cover tops with ribbed drainage surface Standard bar cover tops 660/ / A 660/ / / / / / / / / / with waste water depression and glass pressure rinser Remark These bar cover tops are also available with a fitted glass pressure rinser, with a waste water depression, with a wall panel (660 mm deep) or surrounding downward edge (700 mm deep) or vice versa. A/0 valid from July 20

23 HAGOLA-cover tops (HSA) cover top with ribbed drainage surface cover tops with ribbed drainage surface and lowered bulge border, stainless steel overflow pipe and stainless steel valve cover top with ribbed drainage surface hsa806w hsa556w hsa556w2 hsa557a hsa557a2 hsa806w hsa806w2 hsa807a hsa807a2 hsa2006w hsa2006w2 hsa2007a hsa2007a2 NIROSTA (.40) brushed surface, with sink 550 x 50 x 660 mm, wall panel 7 mm, sink left side 550 x 50 x 660 mm, wall panel 7 mm, sink right side 550 x 50 x 700 mm, surrounding downward edge, sink left side 550 x 50 x 700 mm, surrounding downward edge, sink right side 800 x 50 x 660 mm, wall panel 7 mm, sink left side 800 x 50 x 660 mm, wall panel 7 mm, sink right side 800 x 50 x 700 mm, surrounding downward edge, sink left side 800 x 50 x 700 mm, surrounding downward edge, sink right side 2000 x 50 x 660 mm, wall panel 7 mm, sink left side 2000 x 50 x 660 mm, wall panel 7 mm, sink right side 2000 x 50 x 700 mm, surrounding downward edge, sink left side 2000 x 50 x 700 mm, surrounding downward edge, sink right side A cover top with ribbed drainage surface hsa206w hsa956w hsa956w2 hsa957a hsa957a2 hsa206w hsa206w2 hsa207a hsa207a2 hsa2506w hsa2506w2 hsa2507a hsa2507a2 NIROSTA (.40) brushed surface, with 2 sinks 950 x 50 x 660 mm, wall panel 7 mm, sink left side 950 x 50 x 660 mm, wall panel 7 mm, sink right side 950 x 50 x 700 mm, surrounding downward edge, sink left side 950 x 50 x 700 mm, surrounding downward edge, sink right side 200 x 50 x 660 mm, wall panel 7 mm, sink left side 200 x 50 x 660 mm, wall panel 7 mm, sink right side 200 x 50 x 700 mm, surrounding downward edge, sink left side 200 x 50 x 700 mm, surrounding downward edge, sink right side 2500 x 50 x 660 mm, wall panel 7 mm, sink left side 2500 x 50 x 660 mm, wall panel 7 mm, sink right side 2500 x 50 x 700 mm, surrounding downward edge, sink left side 2500 x 50 x 700 mm, surrounding downward edge, sink right side cover top with ribbed drainage surface and lowered bulge border, stainless steel overflow pipe and stainless steel valve, with glass pressure rinser and pour-out depression cover top with ribbed drainage surface hsa806w hsa556w hsa556w4 hsa557a hsa557a4 hsa806w hsa806w4 hsa807a hsa807a4 hsa2006w hsa2006w4 hsa2007a hsa2007a4 NIROSTA (.40) brushed surface, with sink 550 x 50 x 660 mm, wall panel 7 mm, sink left side 550 x 50 x 660 mm, wall panel 7 mm, sink right side 550 x 50 x 700 mm, surrounding downward edge, sink left side 550 x 50 x 700 mm, surrounding downward edge, sink right side 800 x 50 x 660 mm, wall panel 7 mm, sink left side 800 x 50 x 660 mm, wall panel 7 mm, sink right side 800 x 50 x 700 mm, surrounding downward edge, sink left side 800 x 50 x 700 mm, surrounding downward edge, sink right side 2000 x 50 x 660 mm, wall panel 7 mm, sink left side 2000 x 50 x 660 mm, wall panel 7 mm, sink right side 2000 x 50 x 700 mm, surrounding downward edge, sink left side 2000 x 50 x 700 mm, surrounding downward edge, sink right side valid from July 20 cover top with ribbed drainage surface hsa206w hsa956w hsa956w4 hsa957a hsa957a4 hsa206w hsa206w4 hsa207a hsa207a4 hsa2506w hsa2506w4 hsa2507a hsa2507a4 NIROSTA (.40) brushed surface, with 2 sinks 950 x 50 x 660 mm, wall panel 7 mm, sink left side 950 x 50 x 660 mm, wall panel 7 mm, sink right side 950 x 50 x 700 mm, surrounding downward edge, sink left side 950 x 50 x 700 mm, surrounding downward edge, sink right side 200 x 50 x 660 mm, wall panel 7 mm, sink left side 200 x 50 x 660 mm, wall panel 7 mm, sink right side 200 x 50 x 700 mm, surrounding downward edge, sink left side 200 x 50 x 700 mm, surrounding downward edge, sink right side 2500 x 50 x 660 mm, wall panel 7 mm, sink left side 2500 x 50 x 660 mm, wall panel 7 mm, sink right side 2500 x 50 x 700 mm, surrounding downward edge, sink left side 2500 x 50 x 700 mm, surrounding downward edge, sink right side For accessories, please refer to pages A/2 - A/4 (accessory for bar tops, bar cover tops) A/

24 bar tops, cover tops (ZSA) accessory zsakw4 zsakw9 zsakw5 cold water faucets, chrome-plated for single sink, with flushing tube/ connection hose for single sink, with flushing tube/ connection pipe with fixed spout for double sinks, with 2 flushing tubes/ connection hose A cold water faucet chrome-plated zsakw4 zsamb9 zsamb8 zsamb7 zsamb6 basin mixer, chrome-plated, height 40 mm (standard) for single sink, with flushing tube/2 connection hoses, high pressure for single sink, with flushing tube/ connection hoses, low pressure (boiler) for double sinks, with 2 flushing tubes/2 connection hoses, high pressure for double sinks, with 2 flushing tubes/ connection hoses, low pressure (boiler) basin mixer for double sinks zsamb7 zsamb zsamb2 zsamb zsamb0 basin mixer, chrome-plated, height 20 mm (low discharge) for single sink, with flushing tube/2 connection hoses, high pressure for single sink, with flushing tube/ connection hoses, low pressure (boiler) for double sinks, with 2 flushing tubes/2 connection hoses, high pressure for double sinks, with 2 flushing tubes/ connection hoses, low pressure (boiler) basin mixer for double sinks zsamb0 zsamb zsamb zsamb2 zsamb5 zsamb4 single lever faucet with sprinkler, chrome-plated not mounted, 2 connection hoses, high pressure for single sink, with angle valve + flushing tube/2 connection hoses, high pressure, mounted for double sinks, with 2 angle valves + 2 flushing tubes/2 connection hoses, high pressure, mounted for single sink, with angle valve + flushing tube/2 connection hoses, high pressure, with connection for glass pressure rinser, mounted for double sinks, with 2 angle valves + 2 flushing tubes/2 connection hoses, high pressure, with connection for glass pressure rinser, mounted sensor fitting (not illustrated) zsadiv52 for wash hand basin, chrome-plated with connection hose, Ø 48 mm, height 55 mm, 25 inclined single lever faucet with sprinkler, chrome-plated zsamb zsagd22 zsagd2 glass pressure rinser on sucker glass pressure rinser "stainless steel plate" on sucker, for supplementary installation, connection hose 000 mm long, /8" cap nut, operation pressure -,5 bar, material: NIROSTA high glossy D, diameter 05 mm glass pressure rinser "star" on sucker, for supplementary installation, connection hose 000 mm long, /8" cap nut, operation pressure -,5 bar, material: NIROSTA high glossy D, diameter 05 mm zsadiv50 zsadiv70 water pressure reducer water pressure reducer, 0-6 Bar, not mounted water pressure reducer, 0-6 Bar, mounted glass pressure rinser "star" on sucker zsagd2 A/2 zsagd6 zsagd0 zsadiv5 zsadiv5 zsadiv54 zsadiv55 stop cock/drip depression rinsing/dispenser stop cock for glass pressure rinser or drip depression rinser drip depression rinser with connection hose 000 mm (not for ribbed drainage surface) dispenser, chrome-plated, not mounted dispenser, chrome-plated, with bracket, mounted dispenser, chrome-plated, with bracket, not mounted cleaning agent for dispenser valid from July 20

25 bar tops, cover tops (ZSA) accessory pop-up waste set for single sink zsaag overflow pipe + valve zsadiv2 zsaag zsaag2 zsaag zsaag4 zsaag6 zsaag7 zsadiv2 zsadiv20 zsadiv2 zsadiv22 zsadiv2 pop-up sets, drain connections basin pop-up mixer, set for chrome-plated, sink, with siphon height and 40 drip mm depression (standard) connection, /4" pop-up set for 2 sinks, with siphon and drip depression connection, /4" drain hose 0,80 m, for drip depressions and ribbed drainage surfaces drain hose, cut to size per running metre, Ø /4", with 2 fastening clips pop-up set for sink with siphon pop-up set for 2 sinks with siphon valve for overflow pipe /4" with overflow pipe, stainless steel polished valve for overflow pipe /4" with overflow pipe, stainless steel polished, with T-piece for drip depression drain, hose nozzle " valve for overflow pipe /4" with overflow pipe, stainless steel polished, hose nozzle " valve for overflow pipe /4" with overflow pipe, stainless steel polished, with GK-coupling valve for overflow pipe /4" with overflow pipe, stainless steel polished, with T-piece for drip depression drain, with GK-coupling A zsapp zsapp2 zsapp prism drip plates for sinks 500 x 00 mm (not illustrated) without notch, sink diagonal 540 mm with notch for fitting (left side), sink diagonal 540 mm with notch for fitting (right side), sink diagonal 540 mm overflow pipe + valve, with T-piece zsadiv20 hgzsp glass rinsing appliance (not illustrated) glass rinsing appliance for the cleaning of glasses with pre and post rinsing 7 overflow pipe + valve zsadiv2 zsadiv2 cleaning brush (not illustrated) cleaning brush for drip depression-/floor drain, with Bowden cable, 00 mm long zctdiv6 towel rail (not illustrated) towel rail, not mounted, for inserting in blind panel of the sink overflow pipe + valve GK-coupling zsadiv22 overflow pipe + valve T-piece, GK-coupl. zsadiv2 tools for the assembly of basin mixers (not illustrated) zsadiv4 T-socket wrench zsadiv2 reducer from /2" to /8" for ratchet /8" zsadiv extension for a ratchet /8", 05 mm long zsadiv4 socket wrench insert, long version, mm, /8" zsadiv7 socket wrench insert, long shape, 2 mm, /8" zsadiv8 socket wrench insert, long version, mm, /8" sink, not mounted 00 x 500 x 00 mm zsaeb56 zsaeb56 zsaeb55 sink in stainless steel (.40) 00 x 500 x 00 mm, not mounted, with overflow pipe and valve both in stainless steel 400 x 400 x 00 mm, not mounted, with overflow pipe and valve both in stainless steel valid from July 20 A/

26 bar tops, cover tops (ZSA) accessory zsadiv24 zsadiv25 zsadiv26 chopping boards for drip depressions 280 x 0 x 50 mm, PE x 0 x 50 mm, PE x 0 x 50 mm, PE-500 A chopping board for drip depressions zsadiv24 zsadiv29 openings in the bar top (HSD) and (HSA) Ø 6/45/50/60/65/70/86/04 mm indication of the drilled hole when placing the order indication of the drilled hole after placing of order HAGOLAstainless steel cleaning spray hepdiv8 hepdiv8 hmediv0 stainless steel care product HAGOLA-stainless steel cleaning spray, 500 ml care product, finish for brass, 00 ml 6 6 care product Wenol finish hmediv0 A/4 valid from July 20

27 HAGOLA-built-in drip trays (HUS + HES), drip trays (HAS) built-in drip trays and drip trays Description Built-in drip trays (top or bottom side assembly) and drip trays, brilliant visual appearance (unique prism drip plate), high-gloss, hygiene-safe, easy cleaning B built-in drip tray (HUS) (bottom side assembly) built-in drip tray (HES) (top side assembly) Built-in Drip Tray (bottom side assembly) built-in drip tray (HUS) in NIROSTA (.40) brushed surface 20 mm surrounding supporting border and prism drip plate(s)*, high-gloss optional with drain on left or right side Built-in Drip Tray (top side assembly) built-in drip tray in NIROSTA (.40) brushed surface 20 mm surrounding supporting border and prism drip plate(s)*, high-gloss optional with drain on left or right side, also for quick and easy supplementary installation for flush, countersunk installation of the prism drip plates in work tops like Granite, Corian -, Varicor etc. drip tray (HAS) Drip Tray drip tray in NIROSTA (.40) brushed surface prism drip plate(s)*, high-gloss without drain deep-drawn legs valid from July 20 everywhere and immediately usable * Prism drip plates are protected by European patent. B/

28 HAGOLA-built-in drip trays (HUS + HES), drip trays (HAS) built-in drip trays and drip trays Built-in drip trays (bottom side assembly) cross section of supporting plate/ built-in drip tray (bottom side assembly) e.g. Corian plywood or particle wood sealing prism drip plate drip depression refrigerated cabinet B Built-in drip trays (top side assembly) cross section of supporting plate/built-in drip tray (top side assembly) prism drip plate chucking range up to max. 50 mm supporting plate drip depression fastening screw clip, separately enclosed Drip trays mm B/2 deep-drawn legs For dimensions please refer to page B/. valid from July 20

29 HAGOLA-built-in drip trays - bottom side (HUS) or top side (HES) assembly, top drip trays (HAS) built-in drip trays (bottom or top side assembly), top drip trays drip depression in NIROSTA (.40) brushed surface, prism drip plates high-glossy built-in drip tray (bottom side assembly) 50 x 22 x 20 mm hus052 hus052 hus052 hus0522 hus022 hus022 hus0222 built-in drip trays (bottom side assembly)* 50 x 22 x 20 mm (prism drip plate 490 x 280 mm), without drain 50 x 22 x 20 mm (prism drip plate 490 x 280 mm), with drain (left side) 50 x 22 x 20 mm (prism drip plate 490 x 280 mm), with drain (right s.) 020 x 22 x 20 mm (prism drip plate 980 x 280 mm), without drain 020 x 22 x 20 mm (prism drip plate 980 x 280 mm), with drain (left s.) 020 x 22 x 20 mm (prism drip plate 980 x 280 mm), with drain (right s.) built-in drip tray (top side assembly) 460 x 2 x 250 mm hes hes hes04625 hes04625 hes hes04646 hes0552 hes055 hes06022 hes0602 hes hes06060 hes0222 hes022 built-in drip trays (top side assembly)*, with fastening screw clips 460 x 2 x 250 mm (prism drip plate 420 x 20 mm), without drain 460 x 2 x 250 mm (prism drip plate 420 x 20 mm), with drain (left side) 460 x 2 x 250 mm (prism drip plate 420 x 20 mm), with drain (right s.) 460 x 2 x 460 mm (prism drip plate 420 x 420 mm), with drain (left side) 460 x 2 x 460 mm (prism drip plate 420 x 420 mm), with drain (right s.) 50 x 2 x 50 mm (prism drip plate 490 x 490 mm), with drain (left side) 50 x 2 x 50 mm (prism drip plate 490 x 490 mm), with drain (right s.) 600 x 2 x 20 mm (prism drip plate 560 x 280 mm), with drain (left side) 600 x 2 x 20 mm (prism drip plate 560 x 280 mm), with drain (right s.) 600 x 2 x 600 mm (prism drip plate 560 x 560 mm), with drain (left side) 600 x 2 x 600 mm (prism drip plate 560 x 560 mm), with drain (right s.) 020 x 2 x 20 mm (prism drip plate 980 x 280 mm), with drain (left s.) 020 x 2 x 20 mm (prism drip plate 980 x 280 mm), with drain (right s.) B top drip trays 420 x x 20 mm has0422 has022 has0284 has0282 has0424 has0422 has04928 has0562 has0702 drip trays, without drain 20 x x 20 mm 280 x x 40 mm 280 x x 20 mm 420 x x 40 mm 420 x x 20 mm 490 x x 280 mm 560 x x 20 mm 700 x x 20 mm drain hose for drip depressions zsaag zsaag zsaag4 zsagd0 accessories for built-in drip trays (bottom side assembly) drain hose 0,80 m, for drip depressions and ribbed drainage surfaces drain hose, cut to size per running metre, Ø /4", with 2 fastening clips drip depression rinser with connection hose 000 mm valid from July 20 * drain is overlapping 5 mm! B/

30 B/4 valid from July 20

31 HAGOLA-prism grids (HPR), prism drip plates (HPL), prism decor plates (HPD) prism grids, prism drip plates, prism decor plates Description Prism grids, prism drip plates, prism decor plates, brilliant visual appearance (unique prism drip plate), high-gloss, hygiene-safe, easy cleaning C prism grid (HPR) prism drip plate (HPL) prism decor plate (HPD) Prism Grid* prism grid* in NIROSTA (.40), high-gloss 0 mm surrounding downward edge, for glasses etc. 4 rubberised legs Prism Drip Plate* prism drip plate* in NIROSTA (.40), high-gloss 0 mm surrounding downward edge, with finger hole, e.g. as shelves insert and replacement for HAGOLA-bar tops Prism Decor Plate* - prism decor plate* in NIROSTA (.40), high-gloss - for panellings - sets brilliant effects - modern decoration - as shelves * Prism drip plates, prism grids, prism decor plate are protected by European patent. valid from July 20 C/

32 HAGOLA-prism grids (HPR), prism drip plates (HPL), prism decor plates (HPD) prism grids, prism drip plates, prism decor plates Product examples C versatile: in this case as shelves and as wall panelling prism decor plate for panellings prism grids with rubberised legs, for the storage of glasses prism drip plate with finger hole for easy lifting prism decor plate with fastening boreholes C/2 valid from July 20

33 HAGOLA-prism grids (HPR), prism drip plates (HPL), prism deco plates (HPD) prism grids, prism drip plates, prism deco plates prism grids for glasses, with 4 gummed legs, NIROSTA (.40) high-glossy surface prism grid 280 x 40 mm hpr284 prism grid 420 x 420 mm hpr4242 hpr22 hpr284 hpr282 hpr2828 hpr54 hpr52 hpr528 hpr55 hpr424 hpr422 hpr4228 hpr425 hpr4242 hpr492 hpr4928 hpr495 hpr4942 hpr562 hpr5628 hpr565 hpr62 hpr628 prism grids 20 x 20 mm, with 0 mm surrounding downward edge 280 x 40 mm, with 0 mm surrounding downward edge 280 x 20 mm, with 0 mm surrounding downward edge 280 x 280 mm, with 0 mm surrounding downward edge 50 x 40 mm, with 0 mm surrounding downward edge 50 x 20 mm, with 0 mm surrounding downward edge 50 x 280 mm, with 0 mm surrounding downward edge 50 x 50 mm, with 0 mm surrounding downward edge 420 x 40 mm, with 0 mm surrounding downward edge 420 x 20 mm, with 0 mm surrounding downward edge 420 x 280 mm, with 0 mm surrounding downward edge 420 x 50 mm, with 0 mm surrounding downward edge 420 x 420 mm, with 0 mm surrounding downward edge 490 x 20 mm, with 0 mm surrounding downward edge 490 x 280 mm, with 0 mm surrounding downward edge 490 x 50 mm, with 0 mm surrounding downward edge 490 x 420 mm, with 0 mm surrounding downward edge 560 x 20 mm, with 0 mm surrounding downward edge 560 x 280 mm, with 0 mm surrounding downward edge 560 x 50 mm, with 0 mm surrounding downward edge 60 x 20 mm, with 0 mm surrounding downward edge 60 x 280 mm, with 0 mm surrounding downward edge C prism drip plates as shelves, with finger hole, NIROSTA (.40) high-glossy surface prism drip plate 280 x 40 mm hpl284 prism drip plate 50 x 280 mm hpl528 hpl22 hpl284 hpl282 hpl2828 hpl54 hpl52 hpl528 hpl55 hpl424 hpl422 hpl4228 hpl425 hpl4242 hpl492 hpl4928 hpl495 hpl4942 hpl562 hpl5628 hpl565 hpl62 hpl628 prism drip plates 20 x 20 mm, with 0 mm surrounding downward edge 280 x 40 mm, with 0 mm surrounding downward edge 280 x 20 mm, with 0 mm surrounding downward edge 280 x 280 mm, with 0 mm surrounding downward edge 50 x 40 mm, with 0 mm surrounding downward edge 50 x 20 mm, with 0 mm surrounding downward edge 50 x 280 mm, with 0 mm surrounding downward edge 50 x 50 mm, with 0 mm surrounding downward edge 420 x 40 mm, with 0 mm surrounding downward edge 420 x 20 mm, with 0 mm surrounding downward edge 420 x 280 mm, with 0 mm surrounding downward edge 420 x 50 mm, with 0 mm surrounding downward edge 420 x 420 mm, with 0 mm surrounding downward edge 490 x 20 mm, with 0 mm surrounding downward edge 490 x 280 mm, with 0 mm surrounding downward edge 490 x 50 mm, with 0 mm surrounding downward edge 490 x 420 mm, with 0 mm surrounding downward edge 560 x 20 mm, with 0 mm surrounding downward edge 560 x 280 mm, with 0 mm surrounding downward edge 560 x 50 mm, with 0 mm surrounding downward edge 60 x 20 mm, with 0 mm surrounding downward edge 60 x 280 mm, with 0 mm surrounding downward edge valid from July 20 hpldiv2 hpldiv hpldiv hpldiv4 shelf bracket bars and shelf brackets (not illustrated) 2 pieces shelf bracket bars, with 0 mm hole distance, not mounted, with embossing for fastening elements (screws etc.), 000 mm long 2 pieces shelf bracket bars, with 0 mm hole distance, not mounted, with embossing for fastening elements (screws etc.), 200 mm long 0 pieces shelf brackets for shelf bracket bars with top side rest, not mounted 0 pieces shelf brackets for shelf bracket bars with bottom side rest, not mounted C/

34 C HAGOLA-prism grids (HPR), prism drip plates (HPL), prism deco plates (HPD) prism grids, prism drip plates, prism deco plates prism deco plates for panellings, brilliant visual effects etc., NIROSTA (.40) high-glossy surface with 4 fastening bore holes bore hole Ø 4,5 mm prism decor plate 280 x 40 mm hpd2842 bore hole Ø 4,5 mm prism decor plate 20 x 20 mm hpd222 hpd222 hpd2842 hpd2822 hpd28282 hpd542 hpd522 hpd5282 hpd552 hpd4242 hpd4222 hpd42282 hpd4252 hpd42422 hpd4922 hpd49282 hpd4952 hpd49422 hpd5622 hpd56282 hpd5652 hpd622 hpd6282 prism decor plates with 4 fastening bore holes 20 x 20 mm, with 0 mm surrounding downward edge 280 x 40 mm, with 0 mm surrounding downward edge 280 x 20 mm, with 0 mm surrounding downward edge 280 x 280 mm, with 0 mm surrounding downward edge 50 x 40 mm, with 0 mm surrounding downward edge 50 x 20 mm, with 0 mm surrounding downward edge 50 x 280 mm, with 0 mm surrounding downward edge 50 x 50 mm, with 0 mm surrounding downward edge 420 x 40 mm, with 0 mm surrounding downward edge 420 x 20 mm, with 0 mm surrounding downward edge 420 x 280 mm, with 0 mm surrounding downward edge 420 x 50 mm, with 0 mm surrounding downward edge 420 x 420 mm, with 0 mm surrounding downward edge 490 x 20 mm, with 0 mm surrounding downward edge 490 x 280 mm, with 0 mm surrounding downward edge 490 x 50 mm, with 0 mm surrounding downward edge 490 x 420 mm, with 0 mm surrounding downward edge 560 x 20 mm, with 0 mm surrounding downward edge 560 x 280 mm, with 0 mm surrounding downward edge 560 x 50 mm, with 0 mm surrounding downward edge 60 x 20 mm, with 0 mm surrounding downward edge 60 x 280 mm, with 0 mm surrounding downward edge prism deco plates for panellings, brilliant visual effects etc., NIROSTA (.40) high-glossy surface, without fastening bore holes prism decor plate 280 x 40 mm hpd284 prism decor plate 50 x 280 mm hpd528 hpd22 hpd284 hpd282 hpd2828 hpd54 hpd52 hpd528 hpd55 hpd424 hpd422 hpd4228 hpd425 hpd4242 hpd492 hpd4928 hpd495 hpd4942 hpd562 hpd5628 hpd565 hpd62 hpd628 prism decor plates without fastening bore holes 20 x 20 mm, with 0 mm surrounding downward edge 280 x 40 mm, with 0 mm surrounding downward edge 280 x 20 mm, with 0 mm surrounding downward edge 280 x 280 mm, with 0 mm surrounding downward edge 50 x 40 mm, with 0 mm surrounding downward edge 50 x 20 mm, with 0 mm surrounding downward edge 50 x 280 mm, with 0 mm surrounding downward edge 50 x 50 mm, with 0 mm surrounding downward edge 420 x 40 mm, with 0 mm surrounding downward edge 420 x 20 mm, with 0 mm surrounding downward edge 420 x 280 mm, with 0 mm surrounding downward edge 420 x 50 mm, with 0 mm surrounding downward edge 420 x 420 mm, with 0 mm surrounding downward edge 490 x 20 mm, with 0 mm surrounding downward edge 490 x 280 mm, with 0 mm surrounding downward edge 490 x 50 mm, with 0 mm surrounding downward edge 490 x 420 mm, with 0 mm surrounding downward edge 560 x 20 mm, with 0 mm surrounding downward edge 560 x 280 mm, with 0 mm surrounding downward edge 560 x 50 mm, with 0 mm surrounding downward edge 60 x 20 mm, with 0 mm surrounding downward edge 60 x 280 mm, with 0 mm surrounding downward edge C/4 valid from July 20

35 HAGOLA-tap columns (HSS) tap columns Description Tap columns, standards with style, individual custom-made products on request D model Balken Type G model Butler Version: Balken and Hagotop Tap Columns tap columns in NIROSTA (.40): - Hagotop type G and U - Balken type A, V and G - up to 6 tap cock drilled holes, diameter 24 mm straight-lined design, thus offers additional storage space for glasses (type G) tap cock area available from 500 to 900 mm circulating air refrigeration (optional), consisting of: - fan (20 V/ W) - dividing wall for installation in the tap column (beverage cooling up to the tap cock) Version: Round-Line and New-Line tap columns: - in stainless steel, brushed surface - in chrome-plated brass - in mirror-polished brass - different diameters ( Round-Line, New-Line and Butler ) elegant design classic or modern incl. fastening set New-Line : diameter 2", " or 4", up to 2 tap cock drilled holes Round-Line : diameter or 4, up to 6 tap cock drilled holes Butler : diameter or 4, up to 4 tap cock drilled holes valid from July 20 Round Line, Butler : circulating air refrigeration (optional), consisting of: - fan (24 V/2,2 W) - DC-power supply (24 V/4,4 W) for local on-site assembly (beverage cooling up to the tap cock) A wide programme of accessories (tap cocks, pressure gauge etc.) rounds off our diversity. Individual custom-made products are available in each version. D/

36 HAGOLA-tap columns (HSS) tap columns Individual custom-made products on request: D valid from July 20 D/2

37 HAGOLA-tap columns (HSS) Hagotop Type G and Hagotop Type U Hagotop Type G -lines hsshg2 4-lines hsshg42 5-lines hsshg52 design and function with style NIROSTA (.40) brushed surface with 4 threaded rods M 0 x 50 mm and fastening nuts, up to 900 mm length of tap cock area D 6-lines hsshg (drip depression incl. prism drip plate) 560 (dispensing bed) 660 (depth of the bar top ) cut-out of bar board is not necessary Hagotop Type U 4-lines hsshu42 5-lines hsshu52 design and function with style NIROSTA (.40) brushed surface with 4 threaded rods M 0 x 50 mm and fastening nuts, up to 900 mm length of tap cock area valid from July 20 6-lines hsshu (drip depression incl. prism drip plate) 560 (dispensing bed) 660 (depth of the bar top ) cut-out of bar board is not necessary D/

38 HAGOLA-tap columns (HSS) Balken Type A and Balken Type V Balken Type A Revisionsdeckel -lines hssba 4-lines hssba4 5-lines hssba5 D reliable quality NIROSTA (.40) brushed surface with 4 threaded rods M 0 x 50 mm and fastening nuts, up to 900 mm length of tap cock area Balken Type V 6-lines hssba6 -lines hssbv 4-lines hssbv4 5-lines hssbv5 reliable quality NIROSTA (.40) brushed surface D/4 with 4 threaded rods M 0 x 50 mm and fastening nuts, up to 900 mm length of tap cock area 6-lines hssbv6 valid from July 20

39 . HAGOLA-tap columns (HSS) Balken Type G and New-Line Balken Type G -lines hssbg 4-lines hssbg4 5-lines hssbg5 additional storage space for glasses easy assembly of the pressure gauge NIROSTA (.40) brushed surface D with 4 threaded rods M 8 x 500 mm and fastening nuts New-Line model Hydra model Snake 6-lines hssbg6 Hydra 2" 2-lines Snake 2" -line the modern alternative outer diameter 50,8 mm (2 ) in mirror-polished brass, chrome-plated brass or stainless steel brushed surface valid from July 20 with fastening screws D/5

40 HAGOLA-tap columns (HSS) New-Line New-Line model Zylindra D Zylindra " -line Zylindra 4" -line Zylindra 4" 2-leitig the modern alternative outer diameter 76,2 mm ( ) and 0,6 mm (4 ) Zylindra " incl. tap cock and pressure gauge, -line in mirror-polished brass, chrome-plated brass or stainless steel brushed surface with fastening set, consisting of: pressure plate, threaded rods and fastening nuts valid from July 20 D/6

41 HAGOLA-tap columns (HSS) New-Line New-Line model Pub model T-Line Pub " -line D T-Line " 2-lines the modern alternative outer diameter 76,2 mm ( ) in mirror-polished brass, chrome-plated brass or stainless steel brushed surface valid from July 20 with fastening set, consisting of: pressure plate, threaded rods and fastening nuts D/7

42 HAGOLA-tap columns (HSS) Round-Line with maintenance access panel Round-Line " 2-lines Round-Line " -lines D Round-Line " 4-lines Round-Line 4" 4-lines Round-Line 4" 5-lines D/8 Round-Line 4" 6-lines valid from July 20

43 HAGOLA-tap columns (HSS) Butler with maintenance access panel Butler " -lines D Butler " 4-lines Butler 4" 4-lines valid from July 20 D/9

44 HAGOLA-tap columns (HSS) Round-Line with cock adapter Round-Line " 2-lines D Round-Line " -lines Round-Line " 4-lines valid from July 20 D/0

45 HAGOLA-tap columns (HSS) Round-Line with cock adapter Round-Line 4" 4-lines D Round-Line 4" 5-lines Round-Line 4" 6-lines valid from July 20 D/

46 HAGOLA-tap columns (HSS) Butler with cock adapter D Butler " -lines Butler " 4-lines valid from July 20 D/2

47 HAGOLA-tap columns (HSS) Hagotop type U and G, tap columns "Balken type A, V and G" prices without tap cocks, manometer etc. (for tap cocks, please refer to accessory) type U - NIROSTA (.40) brushed surface hsshu42 beam length 900 mm, 4 tap cock bore holes Ø 24 mm hsshu52 beam length 750 mm, 5 tap cock bore holes Ø 24 mm hsshu62 beam length 900 mm, 6 tap cock bore holes Ø 24 mm type U hsshu62 hsshg2 hsshg42 hsshg52 hsshg62 type G - NIROSTA (.40) brushed surface beam length 900 mm, tap cock bore holes Ø 24 mm beam length 600 mm, 4 tap cock bore holes Ø 24 mm beam length 750 mm, 5 tap cock bore holes Ø 24 mm beam length 900 mm, 6 tap cock bore holes Ø 24 mm type G hsshg2 circulating air cooling " zssukü zssukü circulating air cooling ventilator (220 V/8 W) with divider, installed in tap column, incl. connection cable 2 D zsshds distance base for type U/type G distance base (5 mm high) for 400 mm tap cock height 2 base zsshds hssba hssba4 hssba5 hssba6 type A - NIROSTA (.40) brushed surface beam length 500 mm, tap cock bore holes Ø 24 mm beam length 600 mm, 4 tap cock bore holes Ø 24 mm beam length 750 mm, 5 tap cock bore holes Ø 24 mm beam length 900 mm, 6 tap cock bore holes Ø 24 mm type A hssba hssbv hssbv4 hssbv5 hssbv6 type V - NIROSTA (.40) brushed surface beam length 500 mm, tap cock bore holes Ø 24 mm beam length 600 mm, 4 tap cock bore holes Ø 24 mm beam length 750 mm, 5 tap cock bore holes Ø 24 mm beam length 900 mm, 6 tap cock bore holes Ø 24 mm type V hssbv6 hssbg hssbg4 hssbg5 hssbg6 type G - NIROSTA (.40) brushed surface shelf for glasses 490 x 20 mm, tap cock bore holes Ø 24 mm shelf for glasses 60 x 20 mm, 4 tap cock bore holes Ø 24 mm shelf for glasses 700 x 20 mm, 5 tap cock bore holes Ø 24 mm shelf for glasses 840 x 20 mm, 6 tap cock bore holes Ø 24 mm valid from July 20 type G hssbg Tap cocks in special construction on request, fax no accessory each additional or individually arranged bore hole D/

48 HAGOLA-tap columns (HSS) New-Line, Round-Line and Butler prices without tap cocks, manometer etc. (for tap cocks, please refer to accessory) mirror-polished brass hssnk Snake, Ø 50,8 mm (2"), tap cock bore hole 2 hssnh2 Hydra, Ø 50,8 mm (2"), 2 tap cock bore holes 2 hssnp Pub, Ø 76,2 mm ("), tap cock bore hole 2 hssnt2 T-Line, Ø 76,2 mm ("), 2 tap cock bore holes 2 Snake 2" hssnk2 hssnk2 chrome-plated brass Snake, Ø 50,8 mm (2"), tap cock bore hole 2 hssnh22 Hydra, Ø 50,8 mm (2"), 2 tap cock bore holes 2 hssnt22 T-Line, Ø 76,2 mm ("), 2 tap cock bore holes 2 hssnz2 Zylindra, Ø 76,2 mm ("), tap cock bore hole 2 Hydra 2" hssnh22 D Pub " hssnp2 hssnk satin-brushed stainless steel Snake, Ø 50,8 mm (2"), tap cock bore hole 2 hssnh2 Hydra, Ø 50,8 mm (2"), 2 tap cock bore holes 2 hssnp Pub, Ø 76,2 mm ("), tap cock bore hole 2 hssnt2 T-Line, Ø 76,2 mm ("), 2 tap cock bore holes 2 hssnz4 Zylindra, Ø 76,2 mm ("), tap cock bore hole 2 hssnz7 Zylindra, Ø 0,6 mm (4"), tap cock bore hole 2 hssnz2 Zylindra, Ø 0,6 mm (4"), 2 tap cock bore holes 2 T-Line " hssnt22 hssnz6 hssnz5 hssnz tap column with tap cock and manometer, pipe Zylindra, Ø 76,2 mm ("), polished brass, piston tap cock with compensator and control pressure gauge Zylindra, Ø 76,2 mm ("), brushed stainless steel, piston tap cock with compensator and control pressure gauge Zylindra, Ø 76,2 mm ("), polished stainless steel, piston tap cock with compensator and control pressure gauge Zylindra " hssnz2 hssrl2 hssrl hssrl45 hssrl46 hssrl5 hssrl6 Round Line, satin-brushed stainless steel Ø 76,2 mm ("), 2 tap cock bore holes Ø 76,2 mm ("), tap cock bore holes Ø 76,2 mm ("), 4 tap cock bore holes Ø 0,6 mm (4"), 4 tap cock bore holes Ø 0,6 mm (4"), 5 tap cock bore holes Ø 0,6 mm (4"), 6 tap cock bore holes Zylindra chrome-plated " hssnz hssbl5 hssbl45 hssbl48 Butler, satin-brushed stainless steel Ø 76,2 mm ("), tap cock bore holes Ø 76,2 mm ("), 4 tap cock bore holes Ø 0,6 mm (4"), 4 tap cock bore holes zssukü4 circulating air cooling circulating air cooling for Round-Line " and 4", ventilator 24 V/2,2 W, with DC power supply 24 V/4,4 W and connection cable for the on-site assembly on one of the two tube nozzles 2 Butler " hssbl5 phase-out models, while stocks last Tap cocks in special construction on request, fax no valid from July 20 D/4

49 HAGOLA-tap columns (HSS) accessory zssnal zssnal2 down pipe für tap cocks in chromium nickel steel normal down pipe Ø 7 mm normal down pipe Ø 0 mm 2 2 down pipe zssnal zsskon zsskon zsskon5 zsskon7 tumbler tap cocks with foam possibility, thread nozzle R 5/8, with rosette and sleeve mirror-polished brass normal down pipe Ø 7 mm, 5 mm thread length normal down pipe Ø 0 mm, 5 mm thread length normal down pipe Ø 7 mm, 55 mm thread length normal down pipe Ø 0 mm, 55 mm thread length piston tap cock zsskon zsskon2 zsskon4 zsskon8 chrome-plated brass normal down pipe Ø 7 mm, 5 mm thread length normal down pipe Ø 0 mm, 5 mm thread length normal down pipe Ø 0 mm, 55 mm thread length piston tap cock zsskon zsskon9 tumbler tap cock with compensator and foam possibility, thread nozzle R 5/8, with rosette and sleeve mirror-polished brass normal down pipe Ø 0 mm, 55 mm thread length 2 D zsskon mirror-polished stainless steel normal down pipe Ø 0 mm, 55 mm thread length 2 piston tap cock zsskon zsskon zsskon2 stainless steel tap cocks, model Somweber piston tap cock, normal down pipe Ø 7 mm, 5 mm thread length piston compensator tap cock, normal down pipe Ø 0 mm, 55 mm thread length 2 2 zssdiv zssdiv4 extra charge for thread nozzles thread nozzle with nut for "-column, length: 60 mm, brass thread nozzle with nut for "-column, length: 80 mm, brass 2 2 rosette zssros2 zssros2 zssros rosettes chromium nickel steel (.40) brass polished 2 2 zssros4 zssros blind rosettes chromium nickel steel (.40) brass polished 2 2 blind rosette zssros4 zssdhü zssdhü zssdhü5 distance cores, mirror-polished brass 0 mm 20 mm 0 mm distance cores zssdhü zssdhü2 zssdhü4 zssdhü6 distance cores, chrome-plated brass 0 mm 20 mm 0 mm valid from July 20 zssdhü7 zssdhü8 zssdhü9 distance cores, satin-brushed stainless steel 0 mm 20 mm 0 mm D/5

50 HAGOLA-tap columns (HSS) accessory zssdiv2 dispensing units, not mounted -line, 4 mm beer pipe, pressure regulator, control pressure gauge, bracket f. CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps 2 cleaning adapter zssdiv2 zssdiv6 zssdiv7 2-pipes, 4 mm beer pipe, pressure regulator, control pressure gauge, interim pressurestat, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps -pipes, 4 mm beer pipe, pressure regulator, control pressure gauge, interim pressurestat, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps 2 2 zssdiv9 -pipe, 7 mm beer pipe, pressure regulator, control pressure gauge, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps 2 zssdiv0 2-pipes, 7 mm beer pipe, pressure regulator, control pressure gauge, interim pressurestat, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps 2 D CO2-bottle zssdiv5 zssdiv zssdiv8 -pipes, 7 mm beer pipe, pressure regulator, control pressure gauge, interim pressurestat, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps dispensing units, completely mounted -line, 4 mm beer pipe, pressure regulator, control pressure gauge, bracket f. CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps 2 2 HAGOLAstainless steel cleaning spray hepdiv8 zssdiv9 zssdiv20 2-pipes, 4 mm beer pipe, pressure regulator, control pressure gauge, interim pressurestat, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps -pipes, 4 mm beer pipe, pressure regulator, control pressure gauge, interim pressurestat, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps 2 2 zssdiv -pipe, 7 mm beer pipe, pressure regulator, control pressure gauge, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps 2 zssdiv4 2-pipes, 7 mm beer pipe, pressure regulator, control pressure gauge, interim pressurestat, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps 2 care product Wenol finish hmediv0 zssdiv7 -pipes, 7 mm beer pipe, pressure regulator, control pressure gauge, interim pressurestat, bracket for CO2-bottle, log book, operation manual (sign), CO2-open jawed spanner 0 mm, beer hose, hose spouts, clamps 2 zssdiv2 zssdiv8 cleaning adapter brass for stainless steel tap cock, in brass quality 2 2 zssdiv5 zssdiv2 beer connection pipe 4 mm beer pipe (500 mm long), with 2 hose spouts, premounted on the tap column 7 mm beer pipe (500 mm long), with 2 hose spouts, pre-mounted on tap column 2 2 hgzdiv7 beer pipe cleaning unit mounted cleaning unit for beverage pipes with stop cock for water inlet, admix device for taking up the cleaning tab with integrated non-return valve 2 zssdiv5 carbon dioxide bottles (CO2) CO2-bottle, 2 kg 2 hepdiv8 hmediv0 stainless steel care product HAGOLA-stainless steel cleaning spray, 500 ml care product, finish for brass, 00 ml 6 6 valid from July 20 D/6

51 HAGOLA-tap columns (HSS) accessory zssema zssema5 manometer, not mounted 0-6 bar, red line at bar, not mounted 0-0 bar, red line at 7 bar, not mounted 2 2 manometer zssema zssema4 zssema6 zssrsm zssrsm2 manometer, mounted 0-6 bar, red line at bar, mounted 0-0 bar, red line at 7 bar, mounted ring spanner ring spanner, wrench size 2 /2" for Round-Line- and Hagotop-tap columns ring spanner, wrench size 2", for Round-Line-, Butler-, Pub-, Zylindra-, T-Line- and Slim-Line-tap columns ring spanner zssrsm D valid from July 20 D/7

52 D/8 valid from July 20

53 HAGOLA-refrigerated bar counters (HKT) bar counter comparison refrigerated bar counter First Class, plug-in version refrigerated bar counter Business Class, plug-in version refrigerated bar counter Economy Class, plug-in version First Class, plug-in version Business Class, plug-in version Economy Class, plug-in version fronts in NIROSTA (.40) linen-optic surface, easy to clean fronts in NIROSTA (.40) brushed surface fronts in NIROSTA (.40) brushed surface refrigeration technology: - Danfoss-cooling unit (or similar) - automatic condensate evaporation underneath the cooling unit - circulating air evaporator incl. expansion valve technique (R4a) - comfort control unit with ST-BUS interface, switch for free application, alarm function and emergency operation - efficient refrigeration refrigeration technology: - Danfoss-cooling unit (or similar) - automatic condensate evaporation underneath the cooling unit - circulating air evaporator incl. capillary tube technique (R4a) - comfort control unit with ST-BUS interface, switch for free application, alarm function and emergency operation - solid refrigeration refrigeration technology: - Danfoss-cooling unit (or similar) - automatic condensate evaporation underneath the cooling unit - circulating air evaporator with capillary tube technique (R4a) - electronic control unit with ST-BUS interface and emergency operation - solid refrigeration E refrigerated cabinet: - deep-drawn floor tub incl. drain - integrated odour trap - interior lighting for wing door - refrigerated cabinet: - deep-drawn floor tub as collector tray - lockable refrigerated compartments (optional) compartments (optional) - lockable refrigerated compartments (optional) cooling tub cooling tub cooling tub valid from July 20 refrigerated bar counter First Class, plug-in, without bar top, with cooling tub First Class, plug-in refrigeration technology - Danfoss cooling unit (or similar) - circulating air evaporator with expansion valve technique (R 4a) refrigerated bar counter Business Class, plug-in, without bar top, with cooling tub Business Class, plug-in refrigerated cabinet and cooling tub are cryogenically connected in series refrigerated bar counter Economy Class, plug-in, without bar top, with cooling tub Economy Class, plug-in dimensions of the cooling tub: 277 x 475 x 20 mm (W x H x D) with assembly frame E/

54 HAGOLA-refrigerated bar counters (HKT) bar counter comparison Equipment First Class, Business Class, Economy Class FC BC EC First Class bar top with larger drip depression and the unique prism drip plates drain set for one or two sinks, fitted, incl. hose for the drip depression inherently stable refrigerated casing with jointless insulation refrigerated casing: inner liner NIROSTA (.40) refrigerated casing: inner liner with deep-drawn floor tub incl. drain with integrated odour-trap, connection optionally either on left or right side refrigerated casing: inner liner with deep-drawn floor tub intended as drain tray variable effective heights of the roll-out drawers within a module roll-out drawers: guidance rails, rollers and drawer tubs in NIROSTA wing door module with infinitely height-adjustable grid shelf or barrel edge protection interior lighting for wing door modules (optional) E lockable refrigerated modules (optional) wing door and drawer fronts with hollow chamber gaskets casing frame: hollow chamber profile with integrated cable duct and hollow chamber gaskets fronts in NIROSTA (.40) linen-optic surface, closed porous surface structure, easy to care fronts in NIROSTA (.40) brushed surface cooling unit with expansion valve technique (R 4a) cooling unit with capillary tube technique (R 4a) comfort control unit with digital temperature display, automatic defrosting system, sensor and emergency operation, ST-BUS interface for networking (data recording acc. to HACCP) electronic control unit with digital temperature display, automatic defrosting system, sensor and emergency operation, ST-BUS interface for networking (data recording acc. to HACCP) automatic condensate evaporation (under the cooling unit) 50 optional 790/ /64/ 74 E/2 500/600/ optional 400/500/800 depending on the equipment requests, in 50 mm steps from 450 up to 2750 mm Options of the standard refrigerated bar counter programme: widths: depending on the equipment requests, in 50 mm steps from 450 up to 2750 mm heights: 790/890 mm depths: 500/600/700 mm Please note that the following heights are additionally available: 425/525/880 mm As enhancement of the refrigerated modules, please find our neutral bar counter programme on pages I/ I/8. valid from July 20

55 When is a second circulating air evaporator necessary for the refrigerated cabinet? In case there are eight or more roll-out drawers in the complete refrigerated bar counter, a second evaporator is necessary for an optimal cooling circulation (provided that the drawers are completely filled up). Please pay attention that all refrigerated bar counters included in this catalogue are equipped with one evaporator. The second evaporator has to be taken into account from the calculatory point of view (please inquire for this). Please take from the below mentioned illustrations the refrigerated modules where an installation of two circulating air evaporators are recommended. E Example : refrigerated modules with 2 x roll-out drawers and x 2 roll-out drawers. circulating air evaporator side view valid from July 20 2 drawers E/

56 Two circulating air evaporators in refrigerated bar counters further examples Example 2.: 4 x 2 roll-out drawers circulating air evaporator 2 drawers Example 2.2: x roll-out drawers + wing door module E drawers Example.: 5 x 2 roll-out drawers circulating air evaporator 2 drawers Example.2: x roll-out drawers + 2 wing door modules E/4 drawers valid from July 20

57 7UP l 276 mm 8 mm 2 bottles Active 02 (PET) 0,75 l 26 mm 7 mm Akate (PET) l 29 mm 80 mm 2 bottles Apollinaris 0,7 l 29 mm 77 mm 2 bottles Apollinaris (PET) l 29 mm 80 mm 2 bottles Aquarel,5 l 2 mm 88 mm 6 bottles Auburg Urquelle (PET) l 04 mm 80 mm 2 bottles Barre Pilsener 0, l 29 mm 60 mm 24 bottles Beckers Bester l 08 mm 88 mm 6 bottles Becks div. 0, l 29 mm 60 mm 24 bottles Bad Pyrmonter 0,75 l 290 mm 77 mm 2 bottles Bad Pyrmonter (PET) l 04 mm 80 mm 2 bottles Blue 0, l 28 mm 60 mm 24 bottles Bionade 0, l 28 mm 60 mm 24 bottles Bitburger 0, l 29 mm 60 mm 24 bottles Bitburger 0,5 l 26 mm 67 mm 20 bottles Brinkhoff s 0, l 28 mm 60 mm 24 bottles Possible bottle indications per roll-out drawer beverage producer content bottle height approximate diameter beverage crate content width of module 450 mm width of module 550 mm with separating rods without separating rods with separating rods without separating rods construction depth construction depth construction depth construction depth 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm Coca Cola 0,5 l 285 mm 69 mm 20 bottles Coca Cola,5 l 298 mm 92 mm 0 bottles Coca Cola (PET) l 295 mm 75 mm 2 bottles E valid from July 20 Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. Brohler 0,7 l 29 mm 77 mm 2 bottles Budweiser 0, l 28 mm 60 mm 24 bottles Cab 0, l 28 mm 60 mm 24 bottles Carlsberg 0, l 28 mm 60 mm 24 bottles Carolinen 0,75 l 29 mm 77 mm 2 bottles Carolinen div. 0,7 l 29 mm 77 mm 2 bottles Carolinen (PET) l 288 mm 78 mm 2 bottles Clausthaler 0, l 28 mm 60 mm 24 bottles Coca Cola 0,2 l 206 mm 59 mm 24 bottles Coca Cola 0, l 246 mm 62 mm 24 bottles E/5

58 E Possible bottle indications per roll-out drawer E/6 width of module 450 mm width of module 550 mm with separating rods without separating rods with separating rods without separating rods construction depth construction depth construction depth construction depth beverage crate content approximate diameter bottle height beverage producer content 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm Coca Cola (PET),5 l mm 92 mm 2 bottles Christinen 0,25 l 78 mm 66 mm 24 bottles Christinen 0,75 l 6 mm 80 mm 2 bottles Christinen Carat (PET),5 l 2 mm 88 mm 6 bottles DAB 0, l 28 mm 60 mm 24 bottles Deit div. l 276 mm 8 mm 2 bottles Diebels div. 0, l 28 mm 60 mm 24 bottles Emsland 0,75 l 290 mm 77 mm 2 bottles Emsland (PET) l 04 mm 80 mm 2 bottles Emsland Sprudel div. (PET) l 276 mm 8 mm 2 bottles Erdinger 0,5 l 262 mm 67 mm 20 bottles Fanta 0,2 l 206 mm 59 mm 24 bottles Fanta 0, l 246 mm 62 mm 24 bottles Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. Fanta 0,5 l 285 mm 68 mm 20 bottles Fanta,5 l mm 92 mm 0 bottles Fanta (PET) 0,5 l 28 mm 65 mm 2 bottles Fanta (PET) l 295 mm 75 mm 2 bottles Fanta (PET),5 l mm 92 mm 0 bottles Flensburger 0, l 202 mm 70 mm 20 bottles Franziskaner 0,5 l 26 mm 67 mm 20 bottles Friedensritter Bräu 0, l 202 mm 70 mm 20 bottles Gaffel Kölsch 0, l 28 mm 60 mm 24 bottles Germania 0, l 25 mm 60 mm 24 bottles Germania Malz 0,5 l 26 mm 67 mm 20 bottles Germeta (PET) l 29 mm 80 mm 2 bottles Gerolsteiner 0,7 l 29 mm 77 mm 2 bottles Gerolsteiner 0,75 l 290 mm 77 mm 2 bottles Gerolsteiner (PET) 0,5 l 22 mm 6 mm bottles Gerolsteiner (PET) 0,7 l 282 mm 69 mm 2 bottles Gerolsteiner (PET) l 29 mm 80 mm 2 Flaschen valid from July 20

59 valid from July 20 Possible bottle indications per roll-out drawer width of module 450 mm width of module 550 mm with separating rods without separating rods with separating rods without separating rods construction depth construction depth construction depth construction depth beverage crate content approximate diameter bottle height beverage producer content 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm Gerolsteiner (PET),5 l 2 mm 88 mm 6 bottles Goldener Apfel l 276 mm 8 mm 2 bottles Graf Rudolph Quelle 0,7 l 29 mm 77 mm 2 bottles Graf Rudolph Sprudel (PET) l 276 mm 8 mm 2 bottles Graf Rudolph Quell (PET) l 04 mm 80 mm 2 bottles Granini (PET) l 252 mm 90 mm Granini (PET) 0,5 l 22 mm 64 mm Gutsherren Pils 0, l 77 mm 70 mm 20 bottles Haake Beck 0,5 l 26 mm 67 mm 20 bottles Haake Beck (Langhals) 0, l 29 mm 60 mm 24 bottles Haake Beck (Kurzhals) 0, l 77 mm 70 mm 25 bottles Hagena (Glas) 0,7 l 289 mm 76 mm 2 bottles Hasseröder 0, l 28 mm 60 mm 24 bottles Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. Harzer Grauhof 0,75 l 290 mm 77 mm 2 bottles Harzer Grauhof 0,7 l 29 mm 77 mm 2 bottles Hella (PET),5 l 2 mm 86 mm 6 bottles Heppinger 0,75 l 290 mm 77 mm 2 bottles Herforder 0, l 28 mm 60 mm 24 bottles Herforder (Kurzhals) 0, l 77 mm 70 mm 20 bottles Hohes C (PET) l 276 mm 8 mm Holsten 0, l 28 mm 60 mm 24 bottles Jever 0, l 28 mm 60 mm 24 bottles Kicos 0,7 l 29 mm 77 mm 2 bottles Kilkenny 0, l 28 mm 60 mm 24 bottles Klindworth l 08 mm 88 mm 6 bottles Kloster Andechs 0,5 l 26 mm 67 mm 20 bottles König Ludwig dunkel 0,5 l 26 mm 67 mm 20 bottles König Pilsener 0, l 28 mm 60 mm 24 bottles Köstritzer 0, l 28 mm 60 mm 24 bottles Krombacher div. 0, l 28 mm 60 mm 24 bottles Krombacher (Kurzhals) 0, l 202 mm 70 mm 20 bottles Krombacher Weizen 0,5 l 270 mm 68 mm bottles E/7 E E

60 E Possible bottle indications per roll-out drawer width of module 450 mm width of module 550 mm with separating rods without separating rods with separating rods without separating rods construction depth construction depth construction depth construction depth beverage crate content approximate diameter bottle height beverage producer content 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm Lesumer 0,7 l 29 mm 77 mm 2 bottles Lausitzer Porter Schwarzes 0,5 l 26 mm 67 mm 20 bottles Leikeim 0,5 l 268 mm 70 mm 20 bottles Lesmona div. 0,7 l 29 mm 77 mm 2 bottles Maisel s Edelhopfen 0, l 28 mm 60 mm 24 bottles Maisel s Weisse 0,5 l 26 mm 67 mm 20 bottles Medicus (PET) l 288 mm 78 mm 2 bottles Mezzo Mix 0, l 246 mm 62 mm 24 bottles Mezzo Mix l 28 mm 80 mm 2 bottles Mezzo Mix,5 l mm 92 mm 0 bottles Mixery 0, l 298 mm 60 mm 2 bottles Mönchshof 0,5 l 272 mm 69 mm 20 bottles Paulaner 0,5 l 260 mm 67 mm 20 bottles Pepsi (PET) l 276 mm 8 mm 2 bottles Pilsener Urquell 0, l 28 mm 60 mm 24 bottles Pinkus Pils 0,5 l 269 mm 69 mm 8 bottles Punica (Glas) l 278 mm 87 mm 6 bottles Prima Frucht l 08 mm 88 mm 6 bottles Radeberger 0, l 25 mm 62 mm 24 bottles Radeberger 0,5 l 268 mm 67 mm 20 bottles Rader 0,5 l 26 mm 67 mm 20 bottles Rolinck div. 0, l 28 mm 60 mm 24 bottles Schneider Weisse 0,5 l 26 mm 67 mm 20 bottles Schöfferhofer Grapefruit 0, l 28 mm 60 mm 24 bottles Schöfferhofer Weizen 0,5 l 26 mm 67 mm 20 bottles Schweppes (Glas) 0,2 l 90 mm 54 mm 24 bottles Schweppes (PET) l 29 mm 79 mm 0 bottles Sinalco (PET) l 298 mm 80 mm 2 bottles Sinalco (PET) 0,5 l 249 mm 6 mm 2 bottles Sprite 0,2 l 206 mm 59 mm 24 bottles Sprite 0, l 246 mm 62 mm 24 bottles Sprite 0,5 l 285 mm 68 mm 20 bottles valid from July 20 E/8 Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid.

61 valid from July 20 Possible bottle indications per roll-out drawer Modulbreite 450 mm Modulbreite 550 mm with separating rods without separating rods with separating rods without separating rods construction depth construction depth construction depth construction depth beverage crate content approximate diameter bottle height beverage producer content 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm 500 mm 600 mm 700 mm Sprite (PET) l 295 mm 75 mm 2 bottles Sprite,5 l mm 92 mm 0 bottles Staatl. Fachinger 0,75 l 09 mm 72 mm 2 bottles Steinsieker 0,75 l 290 mm 77 mm 2 bottles Stemberga 0,7 l 29 mm 77 mm 2 bottles Stemberga (PET) l 288 mm 78 mm 2 bottles St. Gero 0,75 l 290 mm 77 mm 2 bottles St. Margareten 0,75 l 290 mm 77 mm 2 bottles Vaihinger (Glas) l 270 mm 87 mm 6 bottles Veltins div. 0, l 29 mm 60 mm 24 bottles Vilsa Wasser (PET) 0,5 l 25 mm 6 mm 2 bottles Vilsa Wasser (PET) l 04 mm 80 mm 2 bottles Vilsa (PET),5 l 2 mm 88 mm 6 bottles Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. Vilsa Wasser 0,25 l 27 mm 57 mm 20 bottles Vilsa div. 0,7 l 29 mm 77 mm 2 bottles Vilsa 0,75 l 290 mm 77 mm 2 bottles Vilsa Sprudel div. (PET) l 276 mm 8 mm 2 bottles Vitamalz 0, l 29 mm 60 mm 24 bottles Vitamalz 0,5 l 262 mm 68 mm 20 bottles Vittel (PET),5 l 09 mm 8 mm 6 bottles Vivaris div. 0,7 l 29 mm 77 mm 2 bottles Vivaris Sprudel div. l 276 mm 8 mm 2 bottles Volvic (PET),5 l mm 82 mm 6 bottles Weihenstephan Weißbier 0,5 l 26 mm 67 mm 20 bottles Werretaler 0,75 l 290 mm 77 mm 2 bottles E/9 E

62 E/0 valid from July 20

63 HAGOLA-refrigerated bar counters (HKT) First Class Description Refrigerated bar counters, plug-in version, with new, worldwide patented closure system, fronts in NIROSTA (.40) linen-optic surface, individual colour- and material selection for the fronts, stylish glass fronts for the wing doors and drawers (optional), lockable refrigerated modules (optional), efficient refrigeration (expansion valve technique) E refrigerated bar counter First Class, plug-in version valid from July 20 Version bar top: - First Class in NIROSTA (.40) brushed surface - wall panel or surrounding downward edge - drip depression incl. prism drip plates* - sink and pop-up set front NIROSTA (.40) linen-optic surface refrigerated casing: - open refrigerated casing - floor and inner liner in NIROSTA (.40) - hollow chamber profile - floor drain and integrated odour trap - connection optional on left or right side - jointless insulation - base rail: 40 mm height test conditions acc. to EN ISO climate class, i.e. ambient temperature 25 C at 60 % relative air humidity temperature class M2, i.e. +7 C to - C Danfoss-cooling unit (or similar) (max. 2 C ambient temperature): - current 20 V / 50 Hz - with filter dryer - sight glass - automatic condensate evaporation underneath the cooling unit - circulating air evaporator with expansion valve technique (R 4a) and condensate tray installed in the instrument panel: - comfort control unit with digital temperature display incl. main switch and additional switch for free application - ST-BUS interface for networking (data recording acc. to HACCP) - pre-set to 6 C cold room temperature - automatic defrosting and sensor - alarm function and emergency operation * Prism drip plates are protected by European patent. E/

64 HAGOLA-refrigerated bar counters (HKT) First Class Product advantages overflow pipe and valve, both in stainless steel comfort control unit with additional switch for free application, splash-proof front side (IP 65), alarm function and emergency operation and ST-BUS interface for networking E energy-efficient hollow chamber gaskets with wrinkle-free and hygienic surfaces incl. gripping closure interior lighting for wing door modules (optional) larger working and rinsing area due to minimised distances inner liner with deep-drawn floor tub and drain with integrated odour trap, connection optional on left or right side NIROSTA (.40) linen-optic surface, easy to clean due to closed porous surface efficient refrigeration with expansion valve technique (R 4a) E/2 very easy handling due to ergonomic handles, positioned at the highest point of the fronts casing frame with foam rubber gaskets valid from July 20

65 HAGOLA-refrigerated bar counters (HKT) First Class Models / model Frankfurt model Stuttgart model Berlin 800 E model Neptun model Poseidon 550 model Dresden valid from July 20 Remark! Above mentioned bar counters are available: either with sink on left or right side, either with wall panel or downward edge model Herkules 800 E/

66 HAGOLA-refrigerated bar counters (HKT) First Class - plug-in version First Class -bar top with assembled pop-up set, cooling unit with expansion valve technique, condensate evaporation, deep-drawn floor tub, drain with integrated odour trap, comfort control, front NIROSTA (.40) linen-optic surface, casing: 600 mm depth, 890 mm height hktf5596 hktf55964 hktf5597 hktf55974 model Frankfurt 550 x 980 x 660 mm, wall panel, sink left 550 x 980 x 660 mm, wall panel, sink right 550 x 980 x 700 mm, downward edge, sink left 550 x 980 x 700 mm, downward edge, sink right Frankfurt sink right hktf55974 price reduction for model Frankfurt for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charge for model Frankfurt without bar top and pop-up set, with cooling tub, plug-in version hktf2096 hktf20964 hktf2097 hktf20974 model Neptun 200 x 980 x 660 mm, wall panel, sink left 200 x 980 x 660 mm, wall panel, sink right 200 x 980 x 700 mm, downward edge, sink left 200 x 980 x 700 mm, downward edge, sink right E Neptun sink right hktf20974 price reduction for model Neptun for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charge for model Neptun without bar top and pop-up set, with cooling tub, plug-in version hktf26596 hktf hktf26597 hktf model Dresden 2650 x 980 x 660 mm, wall panel, sink left 2650 x 980 x 660 mm, wall panel, sink right 2650 x 980 x 700 mm, downward edge, sink left 2650 x 980 x 700 mm, downward edge, sink right Dresden sink right hktf price reduction for model Dresden for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version Option: All refrigerated bar counter models are also available in 790 mm casing height (please observe the height of the barrels accordingly - if applicable only a 0-l-barrel is possible) and in addition in a total height of 950 mm. Furthermore, all refrigerated bar counter models are available in the following compartment widths: 450, 600 and 650 mm. For panellings, bar board, attachment board etc. please refer to "bar furnishings" on page E/47. For cold water faucets, mixer taps, illumination, transport carts etc. please refer to accessory for refrigerated bar counters on pages E/60 - E/62. E/8 valid from July 20

67 HAGOLA-refrigerated bar counters (HKT) Please choose your individual First Class -equipment: glass pressure rinser zsagd4 stop cock zsagd6 zsagd4 zsagd6 for the bar tops glass pressure rinser, installed in drip depression, operating pressure -,5 bar stop cock for glass pressure rinser or drip depression rinser, mounted in sink panel zsagd0 drip depression rinser with connection hose 000 mm depression rinsing zsagd0 wing door DIN left with grid shelf hctvf5586d glass door DIN left with grid shelf hctvf5586d9 hctvf5586d hctvf5586d hctvf5586d2 hctvf5586d4 hctvf5586d9 hctvf5586d0 for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm glass door DIN left, height-adjustable grid shelf, 780 mm glass door DIN right, height-adjustable grid shelf, 780 mm hctvf5586a hctvf5586a2 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvf5586a roll-out drawers hctvf5586a2 hctvf5586a4 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom hctvf5586a roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom*** E roll-out drawers hctvf5586a4 roll-out drawers hctvf5586a hctvf5586a2 hctvf5586a 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvf5586a2 roll-out drawers hctvf5586a hctvf5586a4 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom roll-out drawers hctvf5586a4 roll-out drawer/ wing door DIN left hctvf5586a8 hctvf5586a8 hctvf5586a9 roll-out drawer/ wing door DIN right zctdiv2 hctvf5586a9 top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN left, eff. height 45 mm top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN right, eff. height 45 mm extra charge for each telescopic full extension drawer instead of roll-out drawer bottle cooler for 8 bottles, top: 0 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm unten bottle freezer for 8 bottles, top: -2 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm bottle cooler/ roll-out drawer valid from July 20 E/9

68 HAGOLA-refrigerated bar counters (HKT) First Class - plug-in version First Class -bar top with assembled pop-up set, cooling unit with expansion valve technique, condensate evaporation, deep-drawn floor tub, drain with integrated odour trap, comfort control, front NIROSTA (.40) linen-optic surface, casing: 600 mm depth, 890 mm height hktf9596 hktf95964 hktf9597 hktf95974 model Stuttgart 950 x 980 x 660 mm, wall panel, 2 sinks left 950 x 980 x 660 mm, wall panel, 2 sinks right 950 x 980 x 700 mm, downward edge, 2 sinks left 950 x 980 x 700 mm, downward edge, 2 sinks right Stuttgart 2 sinks right hktf95974 price reduction for model Stuttgart for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charge for model Stuttgart without bar top and pop-up set, with cooling tub, plug-in version hktf25096 hktf hktf25097 hktf model Berlin 2500 x 980 x 660 mm, wall panel, 2 sinks left 2500 x 980 x 660 mm, wall panel, 2 sinks right 2500 x 980 x 700 mm, downward edge, 2 sinks left 2500 x 980 x 700 mm, downward edge, 2 sinks right E Berlin 2 sinks right hktf price reduction for model Berlin for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version hktdf00965 hktdf00966 hktdf00975 hktdf00976 model Poseidon, with tilting waste bin and roll-out drawer on the side 000 x 980 x 660 mm, wall panell, 2 sink left 000 x 980 x 660 mm, wall panel, 2 sinks right 000 x 980 x 700 mm, downward edge, 2 sinks left 000 x 980 x 700 mm, downward edge, 2 sinks right Poseidon 2 sinks right hktf00976 price reduction for model Poseidon for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version hktf05965 hktf05966 hktf05975 hktf05976 model Herkules 050 x 980 x 660 mm, wall panel, 2 sinks left 050 x 980 x 660 mm, wall panel, 2 sinks right 050 x 980 x 700 mm, downward edge, 2 sinks left 050 x 980 x 700 mm, downward edge, 2 sinks right E/20 Herkules 2 sinks right hktf05976 price reduction for model Herkules for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version Option: All refrigerated bar counter models are also available in 790 mm casing height (please observe the height of the barrels accordingly - if applicable only a 0-l-barrel is possible) and in addition in a total height of 950 mm. Furthermore, all refrigerated bar counter models are available in the following compartment widths: 450, 600 and 650 mm. For panellings, bar board, attachment board etc. please refer to "bar furnishings" on page E/47. For cold water faucets, mixer taps, illumination, transport carts etc. please refer to accessory for refrigerated bar counters on pages E/60 - E/62. valid from July 20

69 HAGOLA-refrigerated bar counters (HKT) Please choose your individual First Class -equipment: httfd httfd2 for the open sink substructures wing door DIN left, for sink substructure, eff. heigth 90 mm wing door DIN right, for sink substructure, eff. heigth 90 mm wing door left sink substructure httfd httfp httfz tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l waste bin drawer sink substructure httfz wing door DIN left with grid shelf hctvf5586d tilting waste bin sink substructure httfp glass door DIN left with grid shelf hctvf5586d9 hctvf5586d hctvf5586d hctvf5586d2 hctvf5586d4 hctvf5586d9 hctvf5586d0 hctvf5586a hctvf5586a2 for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm glass door DIN left, height-adjustable grid shelf, 780 mm glass door DIN right, height-adjustable grid shelf, 780 mm 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvf5586a roll-out drawers hctvf5586a2 hctvf5586a4 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom hctvf5586a roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom*** E roll-out drawers hctvf5586a4 roll-out drawers hctvf5586a hctvf5586a2 hctvf5586a 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvf5586a2 roll-out drawers hctvf5586a hctvf5586a4 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom roll-out drawers hctvf5586a4 roll-out drawer/ wing door DIN left hctvf5586a8 hctvf5586a8 hctvf5586a9 roll-out drawer/ wing door DIN rightzctdiv2 hctvf5586a9 top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN left, eff. height 45 mm top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN right, eff. height 45 mm extra charge for each telescopic full extension drawer instead of roll-out drawer bottle cooler for 8 bottles, top: 0 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm unten bottle freezer for 8 bottles, top: -2 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm bottle cooler/ roll-out drawer valid from July 20 E/2

70 HAGOLA-refrigerated bar counters (HKT) Please choose your individual First Class -equipment: zsagd4 for the bar tops glass pressure rinser, installed in drip depression, operating pressure -,5 bar glass pressure rinser zsagd4 zsagd6 stop cock for glass pressure rinser or drip depression rinser, mounted in sink panel stop cock zsagd6 zsagd0 drip depression rinser with connection hose 000 mm depression rinsing zsagd0 E E/22 valid from July 20

71 HAGOLA-refrigerated bar counters (HKT) Business Class Description Refrigerated bar counters, plug-in version, with new, worldwide patented closure system, fronts in NIROSTA (.40) brushed surface, individual colour- and material selection for the fronts, stylish glass fronts for the wing doors and drawers (optional), lockable refrigerated modules (optional), solid refrigeration (capillary tube technique) E refrigerated bar counter Business Class, plug-in version valid from July 20 Version bar top: - First Class in NIROSTA (.40) brushed surface - wall panel or surrounding downward edge - drip depression incl. prism drip plates* - sink and pop-up set front: NIROSTA (.40) brushed surface refrigerated casing: - open refrigerated casing - floor and inner liner in NIROSTA (.40) - hollow chamber profile - deep-drawn floor tub intended as drain tray - jointless insulation - base rail: 40 mm height test conditions acc. to EN ISO climate class, i.e. ambient temperature 25 C at 60 % relative air humidity temperature class M2, i.e. +7 C to - C Danfoss-cooling unit (or similar) (max. 2 C ambient temperature): - current 20 V / 50 Hz - with filter dryer - automatic condensate evaporation underneath the cooling unit - circulating air evaporator with capillary tube technique (R 4a) and condensate tray installed in the instrument panel: - comfort control unit with digital temperature display incl. main switch and additional switch for free application - ST-BUS interface for networking (data recording acc. to HACCP) - pre-set to 6 C cold room temperature - automatic defrosting and sensor - alarm function and emergency operation * Prism drip plates are protected by European patent. E/2

72 HAGOLA-refrigerated bar counters (HKT) Business Class Product advantages overflow pipe and valve, both in stainless steel comfort control unit with additional switch for free application, splash-proof front side (IP 65), alarm function, emergency operation and ST-BUS interface for networking E energy-efficient hollow chamber gaskets with wrinkle-free and hygienic surfaces incl. gripping closure interior lighting for wing door modules (optional) larger working and rinsing area due to minimised distances inner liner with deep-drawn floor tub intended as drain tray NIROSTA (.40), brushed surface solid refrigeration (capillary tube technique) E/24 very easy handling due to ergonomic handles, positioned at the highest point of the fronts casing frame with foam rubber gaskets valid from July 20

73 HAGOLA-refrigerated bar counters (HKT) Business Class Models / model Frankfurt model Stuttgart model Berlin 800 E model Neptun model Poseidon 550 model Dresden valid from July 20 Remark! Above mentioned bar counters are available: either with sink on left or right side, either with wall panel or downward edge model Herkules 800 E/25

74 HAGOLA-refrigerated bar counters (HKT) - plug-in version - Business Class calculation example Berlin 2 sinks right hktf hktb httbz zsagd0 modell Berlin 2500 x 980 x 700 mm, downward edge, 2 sinks right waste bin drawer, for sink substructure, 2 x 6,5 l drip depression rinser with connection hose 000 mm waste bin drawer sink substructure httbz depression rinsing zsagd0 wing door DIN left with grid shelf hctvb5586d roll-out drawers hctvb5586a hctvb5586d hctvb5586a hctvb5586a5 wing door DIN left, height-adjustable grid shelf, eff. height 780 mm 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom E roll-out drawers hctvb5586a5 valid from July 20 valid from July 20 E/28

75 HAGOLA-refrigerated bar counters (HKT) - plug-in version - Business Class calculation example E valid from July 20 valid from July 20 valid from July 20 E/29

76 HAGOLA-refrigerated bar counters (HKT) Business Class - plug-in First Class -bar top with assembled pop-up waste set, cooling unit with capillary tube technique, condensate evaporation, deep-drawn floor tub as drip tray, comfort control, front NIROSTA (.40) brushed surface, casing: 600 mm depth, 890 mm height hktb5596 hktb55964 hktb5597 hktb55974 model Frankfurt 550 x 980 x 660 mm, wall panel, sink left 550 x 980 x 660 mm, wall panel, sink right 550 x 980 x 700 mm, downward edge, sink left 550 x 980 x 700 mm, downward edge, sink right Frankfurt sink right hktb55974 price reduction for model Frankfurt for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charge for model Frankfurt without bar top and pop-up set, with cooling tub, plug-in version hktb2096 hktb20962 hktb2097 hktb20972 model Neptun 200 x 980 x 660 mm, wall panel, sink left 200 x 980 x 660 mm, wall panel, sink right 200 x 980 x 700 mm, downward edge, sink left 200 x 980 x 700 mm, downward edge, sink right E Neptun sink right hktb20972 price reduction for model Neptun for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charge for model Neptun without bar top and pop-up set, with cooling tub, plug-in version hktb26596 hktb hktb26597 hktb model Dresden 2650 x 980 x 660 mm, wall panel, sink left 2650 x 980 x 660 mm, wall panel, sink right 2650 x 980 x 700 mm, downward edge, sink left 2650 x 980 x 700 mm, downward edge, sink right Dresden sink right hktb price reduction for model Dresden for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version Option: All refrigerated bar counter models are also available in 790 mm casing height (please observe the height of the barrels accordingly - if applicable only a 0-l-barrel is possible) and in addition in a total height of 950 mm. Furthermore, all refrigerated bar counter models are available in the following compartment widths: 450, 600 and 650 mm. For panellings, bar board, attachment board etc. please refer to "bar furnishings" on page E/47. For cold water faucets, mixer taps, illumination, transport carts etc. please refer to accessory for refrigerated bar counters on pages E/60 - E/62. E/0 valid from July 20

77 HAGOLA-refrigerated bar counters (HKT) Please choose your individual Business Class -equipment: glass pressure rinser zsagd4 stop cock zsagd6 zsagd4 zsagd6 for the bar tops glass pressure rinser, installed in drip depression, operating pressure -,5 bar stop cock for glass pressure rinser or drip depression rinser, mounted in sink panel zsagd0 drip depression rinser with connection hose 000 mm depression rinsing zsagd0 wing door DIN left with grid shelf hctvb5586d glass door DIN left with grid shelf hctvb5586d9 hctvb5586d hctvb5586d hctvb5586d2 hctvb5586d4 hctvb5586d9 hctvb5586d0 for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm glass door DIN left, height-adjustable grid shelf, eff. height 780 mm glass door DIN right, height-adjustable grid shelf, eff. height 780 mm hctvb5586a hctvb5586a2 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvb5586a roll-out drawers hctvb5586a2 hctvb5586a4 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom hctvb5586a5 roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom E roll-out drawers hctvb5586a4 roll-out drawers hctvb5586a5 hctvb5586a2 hctvb5586a 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvb5586a2 roll-out drawers hctvb5586a hctvb5586a4 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom roll-out drawers hctvb5586a4 roll-out drawer/ wing door DIN left hctvb5586a8 hctvb5586a8 hctvb5586a9 roll-out drawer/ zctdiv2 wing door DIN right hctvb5586a9 top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN left, eff. height 45 mm top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN right, eff. height 45 mm extra charge for each telescopic full extension drawer instead of roll-out drawer bottle cooler for 8 bottles, top: 0 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm unten bottle freezer for 8 bottles, top: -2 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm bottle cooler/ roll-out drawer valid from July 20 E/

78 HAGOLA-refrigerated bar counters (HKT) Business Class - plug-in "First Class"-bar top with assembled pop-up waste set, cooling unit with capillary tube technique, condensate evaporation, deep-drawn floor tub as drip tray, comfort control, front NIROSTA (.40) brushed surface, casing: 600 mm depth, 890 mm height hktb9596 hktb95964 hktb9597 hktb95974 model Stuttgart 950 x 980 x 660 mm, wall panel, 2 sinks left 950 x 980 x 660 mm, wall panel, 2 sinks right 950 x 980 x 700 mm, downward edge, 2 sinks left 950 x 980 x 700 mm, downward edge, 2 sinks right Stuttgart 2 sinks right hktb95974 price reduction for model Stuttgart for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charge for model Stuttgart without bar top and pop-up set, with cooling tub, plug-in version E Berlin 2 sinks right hktb hktb25096 hktb hktb25097 hktb model Berlin 2500 x 980 x 660 mm, wall panel, 2 sinks left 2500 x 980 x 660 mm, wall panel, 2 sinks right 2500 x 980 x 700 mm, downward edge, 2 sinks left 2500 x 980 x 700 mm, downward edge, 2 sinks right price reduction for model Berlin for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version -.008,0 hktdb0096 hktdb00962 hktdb0097 hktdb00972 model Poseidon, with tilting waste bin and roll-out drawer on the side 000 x 980 x 660 mm, wall panel, 2 sinks left 000 x 980 x 660 mm, wall panel, 2 sinks right 000 x 980 x 700 mm, downward edge, 2 sinks left 000 x 980 x 700 mm, downward edge, 2 sinks right Poseidon 2 sinks right hktb00972 price reduction for model Poseidon for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version hktb0596 hktb05964 hktb0597 hktb05974 model Herkules 050 x 980 x 660 mm, wall panel, 2 sinks left 050 x 980 x 660 mm, wall panel, 2 sinks right 050 x 980 x 700 mm, downward edge, 2 sinks left 050 x 980 x 700 mm, downward edge, 2 sinks right E/2 Herkules 2 sinks right hktb05974 price reduction for model Herkules for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version Option: All refrigerated bar counter models are also available in 790 mm casing height (please observe the height of the barrels accordingly - if applicable only a 0-l-barrel is possible) and in addition in a total height of 950 mm. Furthermore, all refrigerated bar counter models are available in the following compartment widths: 450, 600 and 650 mm. For panellings, bar board, attachment board etc. please refer to "bar furnishings" on page E/47. For cold water faucets, mixer taps, illumination, transport carts etc. please refer to accessory for refrigerated bar counters on pages E/60 - E/62. valid from July 20

79 HAGOLA-refrigerated bar counters (HKT) Please choose your individual Business Class -equipment: httbd httbd2 for the open sink substructures wing door DIN left, for sink substructure, eff. height 90 mm wing door DIN right, for sink substructure, eff. height 90 mm wing door left sink substructure httbd httbp httbz tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l waste bin drawer sink substructure httbz wing door DIN left with grid shelf hctvb5586d tilting waste bin sink substructure httbp glass door DIN left with grid shelf hctvb5586d9 hctvb5586d hctvb5586d hctvb5586d2 hctvb5586d4 hctvb5586d9 hctvb5586d0 hctvb5586a hctvb5586a2 for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm glass door DIN left, height-adjustable grid shelf, eff. height 780 mm glass door DIN right, height-adjustable grid shelf, eff. height 780 mm 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvb5586a roll-out drawers hctvb5586a2 hctvb5586a4 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom hctvb5586a5 roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom E roll-out drawers hctvb5586a4 roll-out drawers hctvb5586a5 hctvb5586a2 hctvb5586a 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvb5586a2 roll-out drawers hctvb5586a hctvb5586a4 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom roll-out drawers hctvb5586a4 roll-out drawer/ wing door DIN left hctvb5586a8 hctvb5586a8 hctvb5586a9 roll-out drawer/ wing door DIN rightzctdiv2 hctvb5586a9 top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN left, eff. height 45 mm top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN right, eff. height 45 mm extra charge for each telescopic full extension drawer instead of roll-out drawer bottle cooler for 8 bottles, top: 0 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm unten bottle freezer for 8 bottles, top: -2 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm bottle cooler/ roll-out drawer valid from July 20 E/

80 HAGOLA-refrigerated bar counters (HKT) Please choose your individual Business Class -equipment: zsagd4 for the bar tops glass pressure rinser, installed in drip depression, operating pressure -,5 bar glass pressure rinser zsagd4 zsagd6 stop cock for glass pressure rinser or drip depression rinser, mounted in sink panel stop cock zsagd6 zsagd0 drip depression rinser with connection hose 000 mm depression rinsing zsagd0 E E/4 valid from July 20

81 HAGOLA-refrigerated bar counters (HKT) Business Class, intended for, 4 or 5 50-litres-KEG-barrels Description Refrigerated bar counters, plug-in version, with new, worldwide patented closure system, fronts in NIROSTA (.40) brushed surface, individual colour- and material selection for the fronts, stylish glass fronts for the wing doors and drawers (optional), lockable refrigerated modules (optional), solid refrigeration (capillary tube technique), intended for, 4 or 5 50-litres-KEG-barrels, especially for draught beer E valid from July 20 Version bar top: - First Class in NIROSTA (.40) brushed surface - wall panel or surrounding downward edge - drip depression incl. prism drip plates* - sink and pop-up set front: NIROSTA (.40) brushed surface refrigerated casing: - left and right wing doors - turnable centre frame - barrel edge protection - deep-drawn floor tub intended as drain tray - floor and inner liner in NIROSTA (.40) - hollow chamber profile - jointless insulation - base rail: 40 mm height test conditions acc. to EN ISO climate class, i.e. ambient temperature 25 C at 60 % relative air humidity temperature class M2, i.e. +7 C to - C refrigerated bar counter Business Class, plug-in version, intended for, 4 or 5 50-litres-KEG-barrels Danfoss-cooling unit (or similar) (max. 2 C ambient temperature): - current 20 V / 50 Hz - with filter dryer - automatic condensate evaporation underneath the cooling unit - circulating air evaporator with capillary tube technique (R 4a) and condensate tray installed in the instrument panel: - comfort control unit with digital temperature display incl. main switch and additional switch for free application - ST-BUS interface for networking (data recording acc. to HACCP) - pre-set to 6 C cold room temperature - automatic defrosting and sensor - alarm function and emergency operation * Prism drip plates are protected by European patent. E/5

82 HAGOLA-refrigerated bar counters (HKT) Business Class, intended for, 4 or 5 50-litres-KEG-barrels Product advantages easy barrel changing due to the turnable midframe comfort control unit with additional switch for free application, splash-proof front side (IP 65), alarm function, emergency operation and ST-BUS interface for networking E energy-efficient hollow chamber gaskets with wrinkle-free and hygienic surfaces incl. gripping closure interior lighting for wing door modules (optional) larger working and rinsing area due to minimised distances inner liner with deep-drawn floor tub intended as drain tray NIROSTA (.40), brushed surface solid refrigeration (capillary tube technique) R4a E/6 very easy handling due to ergonomic handles, positioned at the highest point of the fronts casing frame with foam rubber gaskets valid from July 20

83 HAGOLA-refrigerated bar counters (HKT) Business Class, intended for, 4 or 5 50-litres-KEG-barrels Models / E valid from July 20 Remark! Above mentioned bar counters are available: either with sink on left or right side, either with wall panel or downward edge. E/7

84 HAGOLA-refrigerated bar counters (HKT) - plug-in version - Business Class, barrel-cooling calculation example hktb barrel bar counter with turnable midframe 2950 x 980 x 700 mm, downward edge, sink right bar counter for, 4 or 5 x 50 l-barrels sink right hktb glass pressure rinser zsagd4 stop cock zsagd6 zsagd4 zsagd6 glass pressure rinser, installed in drip depression, operating pressure -,5 bar stop cock for glass pressure rinser or drip depression rinser, mounted in sink panel hctvb5586d hctvb5586a wing door DIN left, height-adjustable grid shelf, eff. height 780 mm 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom wing door DIN left with grid shelf hctvb5586d roll-out drawers hctvb5586a E valid from July 20 valid from July 20 E/40

85 HAGOLA-refrigerated bar counters (HKT) - plug-in version - Business Class, barrel-cooling calculation example E valid from July 20 valid from July 20 E/4

86 HAGOLA-refrigerated bar counters (HKT) Business Class - plug-in First Class -bar top with assembled pop-up waste set, cooling unit with capillary tube technique, condensate evaporation, deep-drawn floor tub as drip tray, comfort control, front NIROSTA (.40) brushed surface, casing: 600 mm depth, 890 mm height hktvb95967 hktvb95968 hktvb95977 hktvb95978 barrel bar counter with turnable midframe 950 x 980 x 660 mm, wall panel, sink left 950 x 980 x 660 mm, wall panel, sink right 950 x 980 x 700 mm, downward edge, sink left 950 x 980 x 700 mm, downward edge, sink right bar counter for x 50 l-barrels sink right hktvb95978 price reductions for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charges without bar top and pop-up set, with cooling tub, plug-in version hktvb24096 hktvb hktvb24097 hktvb barrel bar counter with turnable midframe 2400 x 980 x 660 mm, wall panel, sink left 2400 x 980 x 660 mm, wall panel, sink right 2400 x 980 x 700 mm, downward edge, sink left 2400 x 980 x 700 mm, downward edge, sink right E bar counter for or 4 50 l-barrels sink right hktvb price reductions for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version hktvb29596 hktvb hktvb29597 hktvb barrel bar counter with turnable midframe 2950 x 980 x 660 mm, wall panel, sink left 2950 x 980 x 660 mm, wall panel, sink right 2950 x 980 x 700 mm, downward edge, sink left 2950 x 980 x 700 mm, downward edge, sink right bar counter for, 4 or 5 x 50-l-barrels sink right hktvb price reductions for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version Option: All refrigerated bar counter models are also available in 790 mm casing height (please observe the height of the barrels accordingly - if applicable only a 0-l-barrel is possible) and in addition in a total height of 950 mm. Furthermore, all refrigerated bar counter models are available in the following compartment widths: 450, 600 and 650 mm. For panellings, bar board, attachment board etc. please refer to "bar furnishings" on page E/47. For cold water faucets, mixer taps, illumination, transport carts etc. please refer to accessory for refrigerated bar counters on pages E/60 - E/62. E/42 valid from July 20

87 HAGOLA-refrigerated bar counters (HKT) Please choose your individual Business Class -equipment: glass pressure rinser zsagd4 stop cock zsagd6 zsagd4 zsagd6 for the bar tops glass pressure rinser, installed in drip depression, operating pressure -,5 bar stop cock for glass pressure rinser or drip depression rinser, mounted in sink panel zsagd0 drip depression rinser with connection hose 000 mm depression rinsing zsagd0 wing door DIN left with grid shelf hctvb5586d glass door DIN left with grid shelf hctvb5586d9 hctvb5586d hctvb5586d hctvb5586d2 hctvb5586d4 hctvb5586d9 hctvb5586d0 for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm glass door DIN left, height-adjustable grid shelf, eff. height 780 mm glass door DIN right, height-adjustable grid shelf, eff. height 780 mm hctvb5586a hctvb5586a2 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvb5586a roll-out drawers hctvb5586a2 hctvb5586a4 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom hctvb5586a5 roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom E roll-out drawers hctvb5586a4 roll-out drawers hctvb5586a5 hctvb5586a2 hctvb5586a 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvb5586a2 roll-out drawers hctvb5586a hctvb5586a4 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom roll-out drawers hctvb5586a4 roll-out drawer/ wing door DIN left hctvb5586a8 hctvb5586a8 hctvb5586a9 roll-out drawer/ zctdiv2 wing door DIN right hctvb5586a9 top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN left, eff. height 45 mm top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN right, eff. height 45 mm extra charge for each telescopic full extension drawer instead of roll-out drawer bottle cooler for 8 bottles, top: 0 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm unten bottle freezer for 8 bottles, top: -2 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm bottle cooler/ roll-out drawer valid from July 20 E/4

88 HAGOLA-refrigerated bar counters (HKT) Business Class - plug-in First Class -bar top with assembled pop-up waste set, cooling unit with capillary tube technique, condensate evaporation, deep-drawn floor tub as drip tray, comfort control, front NIROSTA (.40) brushed surface, casing: 600 mm depth, 890 mm height hktvb2596 hktvb25962 hktvb2597 hktvb25972 barrel bar counter with turnable midframe 250 x 980 x 660 mm, wall panel, 2 sinks left 250 x 980 x 660 mm, wall panel, 2 sinks right 250 x 980 x 700 mm, downward edge, 2 sinks left 250 x 980 x 700 mm, downward edge, 2 sinks right bar counter for x 50 l-barrels 2 sinks right hktb25972 price reductions for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version without bar top and pop-up set, with cooling tub, plug-in version hktvb28096 hktvb hktvb28097 hktvb barrel bar counter with turnable midframe 2800 x 980 x 660 mm, wall panel, 2 sinks left 2800 x 980 x 660 mm, wall panel, 2 sinks right 2800 x 980 x 700 mm, downward edge, 2 sinks left 2800 x 980 x 700 mm, downward edge, 2 sinks right E bar counter for, 4 or 5 x 50 l-barrels 2 sinks right hktb price reductions for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version hktvb596 hktvb5964 hktvb597 hktvb5974 barrel bar counter with turnable midframe 50 x 980 x 660 mm, wall panel, 2 sinks left 50 x 980 x 660 mm, wall panel, 2 sinks right 50 x 980 x 700 mm, downward edge, 2 sinks left 50 x 980 x 700 mm, downward edge, 2 sinks right bar counter for, 4 or 5 x 50 l-barrels 2 sinks right hktb5974 price reductions for, 4 and 5 barrels for controller-ready bar counters for pre-assembled bar counters (without cooling unit and comfort control) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version Option: All refrigerated bar counter models are also available in 790 mm casing height (please observe the height of the barrels accordingly - if applicable only a 0-l-barrel is possible) and in addition in a total height of 950 mm. Furthermore, all refrigerated bar counter models are available in the following compartment widths: 450, 600 and 650 mm. For panellings, bar board, attachment board etc. please refer to "bar furnishings" on page E/47. For cold water faucets, mixer taps, illumination, transport carts etc. please refer to accessory for refrigerated bar counters on pages E/60 - E/62. E/44 valid from July 20

89 HAGOLA-refrigerated bar counters (HKT) Please choose your individual Business Class -equipment: httbd httbd2 for the open sink substructures wing door DIN left, for sink substructure, eff. height 90 mm wing door DIN right, for sink substructure, eff. height 90 mm wing door left sink substructure httbd httbp httbz tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l waste bin drawer sink substructure httbz wing door DIN left with grid shelf hctvb5586d tilting waste bin sink substructure httbp glass door DIN left with grid shelf hctvb5586d9 hctvb5586d hctvb5586d hctvb5586d2 hctvb5586d4 hctvb5586d9 hctvb5586d0 hctvb5586a hctvb5586a2 for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm glass door DIN left, height-adjustable grid shelf, eff. height 780 mm glass door DIN right, height-adjustable grid shelf, eff. height 780 mm 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvb5586a roll-out drawers hctvb5586a2 hctvb5586a4 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom hctvb5586a5 roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom E roll-out drawers hctvb5586a4 roll-out drawers hctvb5586a5 hctvb5586a2 hctvb5586a 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvb5586a2 roll-out drawers hctvb5586a hctvb5586a4 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom roll-out drawers hctvb5586a4 roll-out drawer/ wing door DIN left hctvb5586a8 Flaschenkühler/ Rollenauszug hctvb5586a8 hctvb5586a9 roll-out drawer/ zctdiv2 wing door DIN right hctvb5586a9 top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN left, eff. height 45 mm top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN right, eff. height 45 mm extra charge for each telescopic full extension drawer instead of roll-out drawer bottle cooler for 8 bottles, top: 0 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm unten bottle freezer for 8 bottles, top: -2 C cold room temperature, bottom: roll-out drawer, eff. height 400 mm valid from July 20 E/45

90 HAGOLA-refrigerated bar counters (HKT) Please choose your individual Business Class -equipment: zsagd4 for the bar tops glass pressure rinser, installed in drip depression, operating pressure -,5 bar glass pressure rinser zsagd4 zsagd6 stop cock for glass pressure rinser or drip depression rinser, mounted in sink panel stop cock zsagd6 zsagd0 drip depression rinser with connection hose 000 mm depression rinsing zsagd0 E E/46 valid from July 20

91 HAGOLAbar furnishings and equipments (HBE) bar furnishings and equipments example bar counter panelling hbetv6 hbetv2 hbetv hbetv4 hbetv5 panellings basic price of bar counter- and bar board panellings bar counter panelling per running metre, HPL-coated, with edge protection NIROSTA brushed bar counter panelling per running metre, real wood, veneered and stained bar counter panelling per running metre, frame and filling, real wood, veneered and solid stained extra price per running metre, bar counter panelling rounded, concave/ convex, veneered and stained hbebb hbebb2 hbebb bar board bar board per running metre plastic-coated, approx. 00 mm width, colour acc. to sample collection bar board per running metre varnished solid wood, approx. 00 mm width, veneered and stained extra price per running metre rounded bar board, concave/convex, veneered and stained hbegb hbegb2 hbegb attachment board glass shelf per running metre with railing, veneered and stained, colour acc. to sample collection turned column, for glass shelf, veneered and stained, colour acc. to sample collection stainless steel tube 2" (Ø 50,8 mm), approx. 650 mm long incl. 2 screw flanges, stainless steel brushed E hbegs hbegs2 hbegs hbegs4 wall cupboard for glasses glass wall cupboard per running metre plastic-coated, XXX x 700 x 50 mm, with 2 glass sliding doors, colour acc. to sample collection glass wall cupboard per running metre plastic-coated, XXX x 700 x 50 mm, open cabinet, colour acc. to sample collection extra price, rear wall per running metre mirrored, in glass wall cupboard extra price, cornice per running metre, on glass wall cupboard hbeap work top work tops, per running metre plastic-coated, XXX x x 40 mm, solid edge, colour acc. to sample collection valid from July 20 E/47

92 E/48 valid from July 20

93 HAGOLA-refrigerated bar counters (HKT) Economy Class Description Refrigerated bar counters, plug-in version, with new latches, fronts in NIROSTA (.40) brushed surface, individual colour- and material selection for the fronts, stylish glass fronts for the wing doors and drawers (optional), lockable refrigerated modules (optional), solid refrigeration (capillary tube technique), can be combined with the neutral bar counter programme of Business Class (valid for all versions) E Version refrigerated bar counter Economy Class, plug-in version bar top: Danfoss-cooling unit (or similar) - First Class in NIROSTA (.40) brushed surface (max. 2 C ambient temperature): - wall panel or surrounding downward edge - current 20 V / 50 Hz - drip depression incl. prism drip plates* - automatic condensate evaporation - sink and pop-up set underneath the cooling unit front NIROSTA - circulating air evaporator with capillary tube technique (.40) brushed surface (R 4a) and condensate tray refrigerated casing: electronic control unit with digital temperature display, - open refrigerated casing - floor and inner liner in NIROSTA automatic defrosting, sensor and emergency operation (.40) - pre-set to 6 C cold room temperature - hollow chamber profile - ST-BUS interface for networking - inner liner with smooth floor (data recording acc. to HACCP) - jointless insulation - base rail: 40 mm height * Prism drip plates are protected by European patent valid from July 20 test conditions acc. to EN ISO climate class, i.e. ambient temperature 25 C at 60 % relative air humidity temperature class M2, i.e. +7 C to - C E/49

94 HAGOLA-refrigerated bar counters (HKT) Economy Class Product advantages overflow pipe and valve, both in stainless steel electronic control unit with automatic defrosting, emergency operation and ST-BUS interface for networking E energy-efficient hollow chamber gaskets with wrinkle-free and hygienic surfaces incl. snap-fit plate interior lighting for wing door modules (optional) larger working and rinsing area due to minimised distances beer froth drains off, hygiene-safe, brilliant visual appearance NIROSTA (.40) brushed surface solid refrigeration with capillary tube technique (R 4a) E/50 very easy handling due to ergonomic handles, positioned at the highest point of the fronts casing frame with foam rubber gaskets valid from July 20

95 HAGOLA-refrigerated bar counters (HKT) Economy Class Models / model Sofia model Amsterdam E model Rom model Wien model London model Prag valid from July 20 Remark! Above mentioned bar counters are available: either with sink on left or right side, either with wall panel or downward edge. model Paris E/5

96 HAGOLA-refrigerated bar counters (HKT) - plug-in version - Economy Class calculation example hkte0596 model Paris 050 x 980 x 660 mm, wall panel, 2 sinks right Paris 2 sinks right hkte0596 httep2 zsagd4 tilting waste bin, for sink substructure, x 20 l glass pressure rinser, installed in drip depression, operating pressure -,5 bar tilting waste bin sink substructure httep2 glass pressure rinser zsagd4 hctve5586d hctve5586d wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left with grid shelf hctve5586d wing door DIN right with grid shelf hctve5586d hctve5586a hctve5586a 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom roll-out drawers hctve5586a roll-out drawers hctve5586a E E/54 valid from July 20 valid from July 20

97 HAGOLA-refrigerated bar counters (HKT) - plug-in version - Economy Class calculation example E valid from July 20 valid from July 20 E/55

98 HAGOLA-refrigerated bar counters (HKT) Economy Class - plug-in First Class -bar top with assembled pop-up waste set, cooling unit with circulating air evaporator and capillary tube technique, condensate evaporation, smooth floor, control unit, front NIROSTA (.40) brushed surface, casing: 600 mm depth, 890 mm height hkte55969 hkte5596 hkte55979 hkte5597 model Amsterdam 550 x 980 x 660 mm, wall panel, sink left 550 x 980 x 660 mm, wall panel, sink right 550 x 980 x 700 mm, downward edge, sink left 550 x 980 x 700 mm, downward edge, sink right Amsterdam sink right hkte5596 price reduction for model Amsterdam for controller-ready bar counters for pre-assembled bar counters (without cooling unit and control unit) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charge for model Amsterdam without bar top and pop-up set, with cooling tub, plug-in version hkte20969 hkte2096 hkte20979 hkte2097 model Wien 200 x 980 x 660 mm, wall panel, sink left 200 x 980 x 660 mm, wall panel, sink right 200 x 980 x 700 mm, downward edge, sink left 200 x 980 x 700 mm, downward edge, sink right E Wien sink right hkte2096 price reduction for model Wien for controller-ready bar counters for pre-assembled bar counters (without cooling unit and control unit) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charge for model Wien without bar top and pop-up set, with cooling tub, plug-in version hkte hkte26596 hkte hkte26597 model Prag 2650 x 980 x 660 mm, wall panel, sink left 2650 x 980 x 660 mm, wall panel, sink right 2650 x 980 x 700 mm, downward edge, sink left 2650 x 980 x 700 mm, downward edge, sink right Prag sink right hkte26596 price reduction for model Prag for controller-ready bar counters for pre-assembled bar counters (without cooling unit and control unit) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version -.008,0 -.27,50 extra charge for model Prag without bar top and pop-up set, with cooling tub, plug-in version Optional: All refrigerated bar counter models are available in a total height of 950 mm. For panellings, bar board, attachment board etc. please refer to "bar furnishings" on page E/47. For cold water faucets, mixer taps, illumination, transport carts etc. please refer to accessory for refrigerated bar counters on pages E/60 - E/62. E/56 valid from July 20

99 HAGOLA-refrigerated bar counters (HKT) Please choose your individual Economy Class -equipment: zsagd4 for the bar tops glass pressure rinser, installed in drip depression, operating pressure -,5 bar glass pressure rinser zsagd4 hctve5586d hctve5586d hctve5586d2 hctve5586d4 for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm wing door DIN left with grid shelf hctve5586d hctve5586d5 hctve5586d6 glass door DIN left, height-adjustable grid shelf, eff. height 780 mm glass door DIN right, height-adjustable grid shelf, eff. height 780 mm glass door DIN left with grid shelf hctve5586d5 hctve5586a hctve5586a2 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctve5586a roll-out drawers hctve5586a2 E hctve5586a hctve5586a8 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom roll-out drawers hctve5586a roll-out drawers hctve5586a8 hctve5586a5 hctve5586a6 2 roll-out drawers with glass pane, eff. heights: 400 mm top/ 00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctve5586a5 roll-out drawers hctve5586a6 hctve5586a7 zctdiv2 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom extra charge for each telescopic full extension drawer instead of roll-out drawer roll-out drawers hctve5586a7 valid from July 20 E/57

100 HAGOLA-refrigerated bar counters (HKT) Economy Class - plug-in First Class -bar top with assembled pop-up waste set, cooling unit with circulating air evaporator and capillary tube technique, condensate evaporation, smooth floor, control unit, front NIROSTA (.40) brushed surface, casing: 600 mm depth, 890 mm height hkte95969 hkte9596 hkte95979 hkte9597 model Sofia 950 x 980 x 660 mm, wall panel, 2 sinks left 950 x 980 x 660 mm, wall panel, 2 sinks right 950 x 980 x 700 mm, downward edge, 2 sinks left 950 x 980 x 700 mm, downward edge, 2 sinks right Sofia 2 sinks right hkte9596 price reduction for model Sofia for controller-ready bar counters for pre-assembled bar counters (without cooling unit and control unit) without bar top and pop-up set without bar top and pop-up set, with cooling tub, control-ready version extra charge for model Sofia without bar top and pop-up set, with cooling tub, plug-in version hkte hkte25096 hkte hkte25097 model Rom 2500 x 980 x 660 mm, wall panel, 2 sinks left 2500 x 980 x 660 mm, wall panel, 2 sinks right 2500 x 980 x 700 mm, downward edge, 2 sinks left 2500 x 980 x 700 mm, downward edge, 2 sinks right E Rom 2 sinks right hkte25096 price reduction for model Rom for controller-ready bar counters for pre-assembled bar counters (without cooling unit and control unit) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version hktde00969 hktde0096 hktde00979 hktde0097 model London, with tilting waste bin and roll-out drawer on side 000 x 980 x 660 mm, wall panel, 2 sinks left 000 x 980 x 660 mm, wall panel, 2 sinks right 000 x 980 x 700 mm, downward edge, 2 sinks left 000 x 980 x 700 mm, downward edge, 2 sinks right London 2 Becken rechts hkte0096 price reduction for model London for controller-ready bar counters for pre-assembled bar counters (without cooling unit and control unit) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version hkte05969 hkte0596 hkte05979 hkte0597 model Paris 050 x 980 x 660 mm, wall panel, 2 sinks left 050 x 980 x 660 mm, wall panel, 2 sinks right 050 x 980 x 700 mm, downward edge, 2 sinks left 050 x 980 x 700 mm, downward edge, 2 sinks right Paris 2 sinks right hkte0596 price reduction for model Paris for controller-ready bar counters for pre-assembled bar counters (without cooling unit and control unit) without bar top and pop-up set without bar top and pop-up set, with cooling tub, plug-in version without bar top and pop-up set, with cooling tub, control-ready version E/58 Optional: All refrigerated bar counter models are available in a total height of 950 mm. For panellings, bar board, attachment board etc. please refer to "bar furnishings" on page E/47. For cold water faucets, mixer taps, illumination, transport carts etc. please refer to accessory for refrigerated bar counters on pages E/60 - E/62. valid from July 20

101 HAGOLA-refrigerated bar counters (HKT) Please choose your individual Economy Class -equipment: zsagd4 for the bar tops glass pressure rinser, installed in drip depression, operating pressure -,5 bar glass pressure rinser zsagd4 htted htted4 for the open sink substructures wing door DIN left, for sink substructure, eff. height 760 mm wing door DIN right, for sink substructure, eff. height 760 mm wing door DIN right sink substructure htted4 httez2 waste bin drawer, for sink substructure, 2 x 6,5 l waste bin drawer sink substructure httez2 httep2 tilting waste bin, for sink substructure, x 20 l tilting waste bin sink substructure httep2 wing door DIN left with grid shelf hctve5586d glass door DIN left with grid shelf hctve5586d5 hctve5586d hctve5586d hctve5586d2 hctve5586d4 hctve5586d5 hctve5586d6 for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm glass door DIN left, height-adjustable grid shelf, eff. height 780 mm glass door DIN right, height-adjustable grid shelf, eff. height 780 mm E hctve5586a hctve5586a2 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctve5586a roll-out drawers hctve5586a2 hctve5586a hctve5586a8 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom roll-out drawers hctve5586a roll-out drawers hctve5586a8 hctve5586a5 hctve5586a6 2 roll-out drawers with glass pane, eff. heights: 400 mm top/ 00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom valid from July 20 roll-out drawers hctve5586a5 roll-out drawers hctve5586a7 roll-out drawers hctve5586a6 hctve5586a7 zctdiv2 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom extra charge for each telescopic full extension drawer instead of roll-out drawer E/59

102 HAGOLA-refrigerated bar counters (HKT) accessories f. First Class -, Business Class - and Economy Class -refr. bar counters zsakw4 zsakw5 cold water faucets, chrome-plated for single sink, with flushing tube/ connection hose for double sinks, with 2 flushing tubes/ connection hose cold water faucet chrome-plated zsakw4 zsamb9 zsamb8 zsamb7 zsamb6 basin mixer, chrome-plated, height 40 mm (standard) for single sink, with flushing tube/2 connection hoses, high pressure for single sink, with flushing tube/ connection hoses, low pressure (boiler) for double sinks, with 2 flushing tubes/2 connection hoses, high pressure for double sinks, with 2 flushing tubes/ connection hoses, low pressure (boiler) basin mixer for double sinks zsamb7 E zsamb zsamb2 zsamb zsamb0 basin mixer, chrome-plated, height 20 mm (low discharge) for single sink, with flushing tube/2 connection hoses, high pressure for single sink, with flushing tube/ connection hoses, low pressure (boiler) for double sinks, with 2 flushing tubes/2 connection hoses, high pressure for double sinks, with 2 flushing tubes/ connection hoses, low pressure (boiler) basin mixer for double sinks zsamb0 single lever faucet with sprinkler, chrome-plated zsamb zsamb zsamb zsamb2 zsamb5 zsamb4 single lever faucet with sprinkler, chrome-plated not mounted, 2 connection hoses, high pressure for single sink, with angle valve + flushing tube/2 connection hoses, high pressure, mounted for double sinks, with 2 angle valves + 2 flushing tubes/2 connection hoses, high pressure, mounted for single sink, with angle valve + flushing tube/2 connection hoses, high pressure, with connection for glass pressure rinser, mounted for double sinks, with 2 angle valves + 2 flushing tubes/2 connection hoses, high pressure, with connection for glass pressure rinser, mounted zsadiv52 sensor fitting for wash hand basin, chrome-plated with connection hose, Ø 48 mm, height 55 mm, 25 inclined prism drip plate for sinks zsapp zsapp zsapp2 zsapp prism drip plates for sinks 500 x 00 mm without notch, sink diagonal 540 mm with notch for fitting (left side), sink diagonal 540 mm with notch for fitting (right side), sink diagonal 540 mm E/60 valid from July 20

103 HAGOLA-refrigerated bar counters (HKT) accessories f. First Class -, Business Class - and Economy Class -refr. bar counters pop-up waste set for single sink zsaag overflow pipe + valve zsadiv2 overflow pipe + valve, with T-piece zsadiv20 zsaag zsaag2 zsaag zsaag4 zsadiv2 zsadiv20 zsadiv2 zsadiv22 zsadiv2 zctag4 zctag5 zctag8 zctag9 hgzsp zsadiv2 pop-up waste sets, drain connections pop-up set for sink, with siphon and drip depression connection, /4" pop-up set for 2 sinks, with siphon and drip depression connection, /4" drain hose 0,80 m, for drip depressions and ribbed drainage surfaces drain hose, cut to size per running metre, Ø /4", with 2 fastening clips valve for overflow pipe /4" with overflow pipe, stainless steel polished valve for overflow pipe /4" with overflow pipe, stainless steel polished, with T-piece for drip depression drain, hose nozzle " valve for overflow pipe /4" with overflow pipe, stainless steel polished, hose nozzle " valve for overflow pipe /4" with overflow pipe, stainless steel polished, with GK-coupling valve for overflow pipe /4" with overflow pipe, stainless steel polished, with T-piece for drip depression drain, with GK-coupling supply connection for mobile bar counter with sink, completely mounted on the side of the counter in a Gastronorm-bowl supply connection for mobile bar counter with 2 sinks, completely mounted on the side of the counter in a Gastronorm-bowl supply connection f. mobile bar counter with sink, mounted underneath the counter at the retaining plate, with connection for floor drain ("First Class -refr. bar counters) supply connection f. mobile bar counter with sink, mounted underneath the counter at the retaining plate, without connection for floor drain ("Business Class -refr. bar counters) glass rinsing appliance glass rinsing appliance for the cleaning of glasses with pre and post rinsing cleaning brush cleaning brush for drip depression-/floor drain, with Bowden cable, 00 mm long E overflow pipe + valve zsadiv2 zssema4 zssema6 manometer, mounted 0-6 bar, red line at bar, mounted 0-0 bar, red line at 7 bar, mounted 2 2 overflow pipe + valve GK-coupling zsadiv22 overflow pipe + valve T-piece, GK-coupl. zsadiv2 zctdiv6 zctfa zctfa4 zctfa zctfa2 zctva0 zctva zctva2 towel rail towel rail, not mounted, for inserting in blind panel of the sink transport carts, heavy-weight rollers with swivel brake transport cart with 4 steerable rollers, suitable up to 2000 mm bar counter length transport cart with 6 steerable rollers, suitable up to 000 mm bar counter length connecting cross bar with 2 steerable rollers, mounted connecting cross bar with 2 steerable rollers, not mounted outer panelling, NIROSTA (.40) linen-optic surface left side wall right side wall rear wall, per compartment valid from July 20 supply connection for mobile bar counter zctag4 zctva4 zctva5 zctva6 outer panelling, NIROSTA (.40) brushed surface left side wall right side wall rear wall, per compartment E/6

104 HAGOLA-refrigerated bar counters (HKT) accessories f. First Class -, Business Class - and Economy Class -refr. bar counters zsadiv4 zsadiv2 zsadiv zsadiv4 zsadiv8 tools for the assembly of basin mixers T-socket wrench reducer from /2" to /8" for ratchet /8" extension for a ratchet /8", 05 mm long socket wrench insert, long version, mm, /8" socket wrench insert, long version, mm, /8" E grid shelf with clamp left zctrm4 intermediate grid shelf behind midframe zctrl detachable grid zctrl2 zctrl zctrl2 zctrm4 zctrm5 zctfs2 zctdiv zctbl5 zctbl6 zctdiv zctbl zctbl2 zctas zctas8 zctas2 zctas4 additional grids and accessory parts intermediate grid shelf behind midframe, 0 mm width, for 600 mm casing depth detachable grid, 0 mm high, for 600 mm casing depth grid shelf with clamp left, with shelf bracket, mounted in 550/600 mm compartment grid shelf with clamp right, with shelf bracket, mounted in 550/600 mm compartment barrel edge protection for wing door compartment 550 mm width, mounted PVC-separating rod, 47 mm long, for roll-out drawer 550 mm width interior lighting 24 V, incl. cable, bulb and DC power supply, connection left interior lighting 24 V, incl. cable, bulb and DC power supply, connection right direct current supply 20 V, 2 V - 5 VA/24 V - 45 VA, for interior lighting permanent illumination 20 V, for 790/890 mm height, connection left permanent illumination 20 V, for 790/890 mm height, connection right 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 890 mm support rail, not mounted, f. 600 mm casing depth 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 890 mm, f. GN-bowls support rail, not mounted, f. 600 mm casing depth, f. Gastronormbowls chopping board for drip depressions zsadiv24 zsadiv24 zsadiv25 zsadiv26 zctdiv2 chopping boards for drip depressions 280 x 0 x 50 mm, PE x 0 x 50 mm, PE x 0 x 50 mm, PE-500 label display for handles label clips, to affix on handles, transparent surface, 0 pieces, length: 70 mm HAGOLAstainless steel cleaning spray hepdiv8 zctdb zctdb2 zctdb zctdb4 zctdb5 zctdb6 zctdb7 openings in the refrigerated casing with plastic frame and accessory nominal-ø 40 mm, frame edge Ø 00 mm nominal-ø 50 mm, frame edge Ø 0 mm nominal-ø 60 mm, frame edge Ø 0 mm nominal-ø 75 mm, frame edge Ø 0 mm nominal-ø 00 mm, frame edge Ø 50 mm nominal-ø 5 mm, frame edge Ø 70 mm counterpart sleeve to frame, nominal-ø 00 mm labe clips to affix on handles zctdiv2 zsadiv29 zctdiv26 zctdiv27 zctdiv9 zctdiv40 zctdiv28 openings in the bar top (HSD) and (HSA) Ø 6/45/50/60/65/70/86/04 mm indication of the drilled hole when placing the order indication of the drilled hole after placing of order LED-illumination LED-lighting, white, for wing door compartment, cable exit on left side* LED-lighting, white, for wing door compartment, cable exit on right side* LED-lighting, white, for drawer compartment, cable exit on left side* LED-lighting, white, for drawer compartment, cable exit on right side* transformer for LED-lighting, up to max. compartments plastic frame for opening 40 mm zctdb E/62 zctdiv42 zctdiv9 hepdiv8 hmediv0 locking devices for fronts gripping closure locking for wing door- and roll-out drawer front ("First Class - and "Business Class -refr. bar counters) cylinder lock for wing door- or roll-out drawer front ("Economy Class -refr. bar counters) stainless steel care product HAGOLA-stainless steel cleaning spray, 500 ml care product, finish for brass, 00 ml *Due to the installed illumination, the effective height is reduced by 0 mm! 6 6 valid from July 20

105 HAGOLA-refrigerated bar counters (HKT) Global Class Description Refrigerated bar counters, plug-in version, stylish design, new flexible scope for design considering the international standards and requirements E refrigerated bar counter Global Class, plug-in version Version integrated worktop in stainless steel (.406), brushed surface fronts in stainless steel (.406), brushed surface refrigerated casing: - open refrigerated casing - floor and inner liner in stainless steel (.406), untreated surface - hollow chamber gaskets - jointless insulation - legs: 20 mm, height-adjustable - outer casing: galvanised steel sheet Danfoss-cooling unit (or similar) (max. 2 C ambient temperature) - current 20 V / 50 Hz / 2,0 A - cooling unit with filter dryer circulating-air evaporator (24 V DC-power supply) with capillary tube technique (R 4a) and condensate tray electronic control unit with integrated main switch, pre-set to 6 C cold room temperature, - ST-BUS interface for networking (data recording acc. to HACCP) valid from July 20 test conditions acc. to EN ISO climate class, i.e. ambient temperature 25 C at 60 % relative air humidity temperature class M2, i.e. +7 C to - C E/6

106 HAGOLA-refrigerated bar counters (HKT) Global Class Product advantages easy and hygienic cleaning of the wrinkle-free hollow chamber gasket, no space for bacteria nests circulating air evaporator (24 V DC-power supply), solid refrigeration with capillary tube technique (R 4a) E form follows function ergonomically optimal position of the handles (at the highest point) throughout the total width quick product identification due to the glass fronts (entire overview) flexible colouring of the stainless steel fronts E/64 further combination possibilities valid from July 20

107 HAGOLA-refrigerated bar counters (HKT) Global Class Dimensions model Toulouse E model Palermo valid from July 20 model Sevilla E/65

108 HAGOLA-refrigerated bar counters (HKT) Global Class, plug-in version Worktop in stainless steel (.406) brushed surface, cooling unit with circulating-air evaporator and capillary tube technique, control unit with automatic defrosting, smooth floor, front in stainless steel (.406) brushed surface, casing: mm front/660 mm depth, 860/880 mm height hktg0286 hktg02864 model Toulouse 020 x 880 x 660 mm, plug-in version, cooling unit on left side 020 x 880 x 660 mm, plug-in version, cooling unit on right side Toulouse connection right hktg02864 hktg5286 hktg52864 model Palermo 520 x 880 x 660 mm, plug-in version, cooling unit on left side 520 x 880 x 660 mm, plug-in version, cooling unit on right side Palermo connection right hktg52864 hktg20286 hktg model Sevilla 2020 x 880 x 660 mm, plug-in version, cooling unit on left side 2020 x 880 x 660 mm, plug-in version, cooling unit on right side E Sevilla connection right hktg20286 wing door DIN left with grid shelf hctg5086d wing door DIN left with glass pane hctg5086d5 hctg5086d hctg5086d hctg5086d2 hctg5086d4 hctg5086d5 hctg5086d6 wing door DIN left (barrel compartm.) hctg5086d2 hctg5086a hctg5086a2 roll-out drawers hctg5086a hctg5086a hctg5086a9 hctg5086a0 hctg5086a6 hctg5086f hctg5086f hctg5086f4 front stainless steel (.406) brushed sfc. individual equipment for the open refrigerated compartments wing door DIN left, with grid shelf, effective height 750 mm wing door DIN right, with grid shelf, effective height 750 mm wing door DIN left, barrel compartment, effective height 750 mm wing door DIN right, barrel compartment, effective height 750 mm wing door DIN left with glass pane and grid shelf, eff. height 750 mm wing door DIN right with glass pane and grid shelf, eff. height 750 mm 2 roll-out drawers, effective heights 5 mm top/5 mm bottom 2 roll-out drawers, effective heights 05 mm top/65 mm bottom 2 roll-out drawers, effective heights 65 mm top/05 mm bottom hctg5086a5 roll-out drawer, effective height 05 mm hctg5086a8 2 roll-out drawers w. glass pane, eff. heights 5 mm top/ 5 mm bottom 2 roll-out drawers w. glass pane, eff. heights 05 mm top/ 65 mm bottom 2 roll-out drawers, effective heights 65 mm top/05 mm bottom roll-out drawer with glass pane, effective height 05 mm bottle insert for 8 bottles top: bottle insert, bottom: roll-out drawer, effective height 65 mm top: bottle insert, bottom: roll-out drawer with glass pane, effective height 65 mm valid from July 20 roll-out drawers with glass pane hctg5086a9 roll-out drawer with glass pane hctg5086a6 zctdiv25 zctdiv26 zctdiv27 zctdiv9 zctdiv40 zctdiv28 accessory cylinder lock for wing door- and roll-out drawer front ("Global Class -refr. bar counters) LED-lighting, white, for wing door compartment, cable exit on left side* LED-lighting, white, for wing door compartment, cable exit on right side* LED-lighting, white, for drawer compartment, cable exit on left side* LED-lighting, white, for drawer compartment, cable exit on right side* transformer for LED-lighting, up to max. compartments *Due to the installed illumination, the effective height is reduced by 0 mm! E/67

109 E/68 valid from July 20

110 HAGOLA-refrigerated bar counters (HKT) undercounter Description Refrigerated bar counters, plug-in version, with new, worldwide patented closure system, fronts in NIROSTA (.40) brushed surface, optional available: efficient refrigeration (expansion valve technique) or solid refrigeration (capillary tube technique) refrigerated bar counter for the substructure, plug-in version F Version refrigerated bar counter for the substructure in NIROSTA (.40) brushed surface front NIROSTA (.40), brushed surface refrigerated casing: - open refrigerated casing - floor and inner liner in NIROSTA (.40) - hollow chamber profile - deep-drawn floor tub as drain tray - jointless insulation - base rail: 40 mm height test conditions acc. to EN ISO 295-2, climate class, i.e. ambient temperature 25 C at 60 % relative air humidity; temperature class M2, i.e. +7 C to - C Danfoss-cooling unit (or similar) (max. 2 C ambient temperature): - current: 20 V / 50 Hz - with filter dryer - automatic condensate evaporation below the cooling unit - circulating air evaporator with expansion valve technique (R 4a) or with capillary tube technique (R 4a) and condensate tray control unit: - comfort control unit with digital temperature display incl. main switch and additional switch for free application - ST-BUS interface for networking (data recording acc. to HACCP) - pre-set to 6 C cold room temperature - automatic defrosting system and sensor - alarm function and emergency operation valid from July 20 F/

111 HAGOLA-refrigerated bar counters (HKT) undercounter Product advantages energy-efficient hollow chamber gaskets with wrinkle-free and hygienic surfaces incl. gripping closure comfort control unit with additional switch for free application, splash-proof front side (IP 65), alarm function, emergency operation and ST-BUS interface for networking F very easy handling due to ergonomic handles, positioned at the highest point of the fronts inner liner with deep-drawn floor tub as drain tray casing frame with foam rubber gaskets Please choose your cooling system according to your requirements: F/2 efficient refrigeration with expansion valve technique (R 4a) solid refrigeration with capillary tube technique (R 4a) valid from July 20

112 HAGOLA-refrigerated bar counters (HKT) undercounter F valid from July 20 F/

113 HAGOLA-refrigerated bar counters (HKT) Business Class - plug-in cooling unit with expansion valve technique, condensate evaporation, deep-drawn floor tub as drain tray, comfort control unit, front NIROSTA (.40) brushed surface, casing: 600 mm depth, 525 mm height hktvb056 hktvb0562 open casing with 40 mm base rail, 560 mm total height 00 x 565 x 600 mm, machine compartment DIN left 00 x 565 x 600 mm, machine compartment DIN right 00 mm width machine compartment DIN left hktvb056 hktvb7556 hktvb x 565 x 600 mm, machine compartment DIN left 750 x 565 x 600 mm, machine compartment DIN right 750 mm width machine compartment DIN left hktvb7556 hktvb22056 hktvb x 565 x 600 mm, machine compartment DIN left 2200 x 565 x 600 mm, machine compartment DIN right 2200 mm width machine compartment DIN left hktvb22056 F cooling unit with capillary tube technique, condensate evaporation, deep-drawn floor tub as drip tray, comfort control, front NIROSTA (.40) brushed surface, casing: 600 mm depth, 525 mm height hktvb056 hktvb0564 open casing with 40 mm base rail, 560 mm total height 00 x 565 x 600 mm, machine compartment DIN left 00 x 565 x 600 mm, machine compartment DIN right 00 mm width machine compartment DIN left hktvb056 hktvb7556 hktvb x 565 x 600 mm, machine compartment DIN left 750 x 565 x 600 mm, machine compartment DIN right 750 mm width machine compartment DIN left hktvb7556 hktvb22056 hktvb x 565 x 600 mm, machine compartment DIN left 2200 x 565 x 600 mm, machine compartment DIN right 2200 mm width machine compartment DIN left hktvb22056 F/4 valid from July 20

114 HAGOLA-refrigerated bar counters (HKT) Please choose your individual equipment: wing door DIN left with grid shelf hctvf4556d hctvf4556d hctvf4556d2 hctvf4556a hctvf4556a2 hctvf4556a4 First Class front NIROSTA (.40) linen-optic surface individual equipment of the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height, NH 45 mm wing door DIN right, height-adjustable grid shelf, eff. height, NH 45 mm roll-out drawer, eff. height 400 mm telescopic full extension drawer, eff. height 400 mm 2 telescopic full extension drawers for GN-bowls /, up to eff. height 00 mm top/00 mm bottom wing door DIN right with grid shelf hctvf4556d2 roll-out drawer hctvf4556a hctvb4556d hctvb4556d2 hctvb4556a hctvb4556a2 hctvb4556a4 Business Class front NIROSTA (.40) brushed surface individual equipment of the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height, NH 45 mm wing door DIN right, height-adjustable grid shelf, eff. height, NH 45 mm roll-out drawer, eff. height 400 mm telescopic full extension drawer, eff. height 400 mm 2 telescopic full extension drawers for GN-bowls /, up to eff. height 00 mm top/00 mm bottom telescopic full ext. drawers hctvf4556a4 grid shelf with clamp left zctrm6 intermediate grid shelf behind midframe zctrl detachable grid zctrl2 zctrm zctrm2 zctrm zctrl zctrl2 zctdiv0 zctbl5 zctbl6 zctbl zctbl2 zctdiv zctas9 zctas8 zctdb zctdb2 zctdb zctdb4 zctdb5 zctdb6 zctdb7 zsadiv2 additional grids and accessory parts grid shelf w. clamp left, w. shelf bracket, mounted in 450/600 mm comp. grid shelf w. clamp right, w. shelf bracket, mounted in 450/600 mm comp, grid shelf w/o clamp, w. shelf bracket, mounted in 450/600 mm comp. intermediate grid shelf behind midframe, 0 mm width, for 600 mm casing depth detachable grid, 0 mm high, for 600 mm casing depth PVC-separating rod, 7 mm long, for roll-out drawer 450 mm wide interior lighting 24 V, incl. cable, bulb and DC power supply, connection left interior lighting 24 V, incl. cable, bulb and DC power supply, connection right permanent illumination 20 V, for 525 mm height, connection left permanent illumination 20 V, for 525 mm height, connection right direct current supply 20 V, 2 V - 5 VA/24 V - 45 VA, for interior lighting 2 support and 2 adjusting rails, mounted, for 600 mm casing depth, construction height 525 mm support rail, not mounted, f. 600 mm casing depth openings in the refrigerated casing with plastic frame and accessory nominal-ø 40 mm, frame edge Ø 00 mm nominal-ø 50 mm, frame edge Ø 0 mm nominal-ø 60 mm, frame edge Ø 0 mm nominal-ø 75 mm, frame edge Ø 0 mm nominal-ø 00 mm, frame edge Ø 50 mm nominal-ø 5 mm, frame edge Ø 70 mm counterpart sleeve to frame, nominal-ø 00 mm cleaning brush cleaning brush for drip depression-/floor drain, with Bowden cable, 00 mm long F valid from July 20 plastic frame for opening 40 mm zctdb locking device for fronts zctdiv42 gripping closure locking for wing door- and roll-out drawer front ("First Class - and "Business Class -refr. bar counters) hepdiv8 hmediv0 stainless steel care product HAGOLA-stainless steel cleaning spray, 500 ml care product, finish for brass, 00 ml 6 6 F/5

115 F/6 valid from July 20

116 HAGOLA-compact bar counters (HCT-V) First Class, refrigeration prepared Description Compact bar counters, refrigeration prepared, inner liner with deep-drawn floor tub and drain with integrated odour trap, connection optional on left or right side, efficient refrigeration (expansion valve technique) compact bar counter First Class, refrigeration prepared Version compact bar counter: - refrigeration prepared - intended for the connection to on-site building s facilities - installed circulating air evaporator with expansion valve technique (R 4a) and condensate tray - assembled refrigerating lines - floor drain and integrated odour trap refrigerated casing with centre frame(s): - open refrigerated casing - deep-drawn floor tub and inner liner in NIROSTA (.40) - hollow chamber profile - outer casing in galvanised steel connection of the refrigerating lines and floor drain optional on left or right side jointless insulation base rail: 40 mm height front NIROSTA (.40) linen-optic surface test conditions acc. to EN ISO 295-2, climate class, i.e. ambient temperature 25 C at 60 % relative air humidity; temperature class M2, i.e. +7 C to - C G valid from July 20 G/

117 HAGOLA-compact bar counters (HCT-V) First Class, refrigeration prepared Product advantages energy-efficient hollow chamber gaskets with wrinkle-free and hygienic surfaces incl. gripping closure interior lighting (option) NIROSTA (.40) linen-optic surface, easy to care due to a closed-porous surface inner liner with deep-drawn floor tub and drain with integrated odour trap, connection optional on left or right side G very easy handling due to ergonomic handles, positioned at the highest point of the fronts efficient refrigeration with expansion valve technique (R 4a) G/2 casing frame with foam rubber gaskets valid from July 20

118 HAGOLA-compact bar counters (HCT-V) First Class, refrigeration prepared 80/90 790/ G valid from July 20 Important remark! In case of a refrigerated cabinet containing several roll-out drawers, a second evaporator is required in order to achieve an optimal circulation of the air (refer to page E/ E/4). G/

119 HAGOLA-compact bar counters (HCT-V) First Class, refrigeration prepared installed circulating air evaporator (expansion valve technique), mounted refrig. lines conducted out on left or right side, deep-drawn floor tub, drain with integrated odour trap, casing: 600 mm depth, 790 mm height 550 mm length hctfv hctfv hctfv open casing with 40 mm base rail, 80 mm total height 550 x 790 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 20 W** 550 x 790 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 20 W** 00 mm length hctfv0076 hctfv0076 hctfv x 790 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 240 W** 00 x 790 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 240 W** 650 mm length hctfv65076 hctfv65076 hctfv x 790 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 0 W** 650 x 790 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 0 W** 2200 mm length hctfv hctfv hctfv x 790 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 450 W** 2200 x 790 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 450 W** 2750 mm length hctfv hctfv hctfv x 790 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 570 W** 2750 x 790 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 570 W** G installed circulating air evaporator (expansion valve technique), mounted refrig. lines conducted out on left or right side, deep-drawn floor tub, drain with integrated odour trap, casing: 600 mm depth, 890 mm height 550 mm length hctfv open casing with 40 mm base rail, 90 mm total height hctfv x 890 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 20 W** hctfv x 890 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 20 W** 00 mm length hctfv0086 hctfv0086 hctfv x 890 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 240 W** 00 x 890 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 240 W** 650 mm length hctfv65086 hctfv65086 hctfv x 890 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 0 W** 650 x 890 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 0 W** 2200 mm length hctbv hctfv hctfv x 890 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 450 W** 2200 x 890 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 450 W** G/ mm length hctbv hctfv x 890 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 570 W** hctfv x 890 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 570 W** ** refrigerating capacity in Watt at -0 C VT For illuminations, control units, DC-power supply etc., please refer to "accessory" on pages G/6 - G/7 valid from July 20

120 HAGOLA-compact bar counters (HCT-V) Please choose your individual First Class -equipment: wing door DIN left with grid shelf hctvf5576d glass door DIN left with grid shelf hctvf5576d9 hctvf5576d hctvf5576d hctvf5576d2 hctvf5576d4 hctvf5576d9 hctvf5576d0 construction height 790 mm Front NIROSTA (.40) linen-optic surface individual equipment for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 680 mm wing door DIN right, height-adjustable grid shelf, eff. height 680 mm wing door DIN left, height-adjustable grid shelf, eff. height 680 mm wing door DIN right, height-adjustable grid shelf, eff. height 680 mm glass door DIN left, height-adjustable grid shelf, eff. height 680 mm glass door DIN right, height-adjustable grid shelf, eff. height 680 mm hctvf5576a2 hctvf5576a hctvf5576a2 hctvf5576a 2 roll-out drawers, eff. heights: 250 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/00 mm bottom 2 roll-out drawers, eff. heights: 50 mm top/250 mm bottom roll-out drawers, eff. heights: 90 mm top/90 mm centre/75 mm bottom*** roll-out drawers hctvf5576a2 roll-out drawers hctvf5576a hctvf5576a5 hctvf5576a6 hctvf5576a7 2 roll-out drawers with glass pane, eff. heights: 50 mm top/250 mm bottom 2 roll-out drawers with glass pane, eff. heights: 250 mm top/50 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/00 mm bottom roll-out drawers hctvf5576a5 roll-out drawers hctvf5576a7 roll-out drawer/ wing door DIN left hctvf5576a8 roll-out dawer/ wing door DIN right hctvf5576a9 hctvf5576a8 hctvf5576a9 zctdiv2 top: roll-out drawer, eff. height: 250 mm, bottom: wing door DIN left, eff. height 65 mm top: roll-out drawer, eff. height: 250 mm, bottom: wing door DIN right, eff. height 65 mm extra charge for each telescopic full extension drawer instead of roll-out drawer wing door DIN left with grid shelf hctvf5586d glass door DIN left with grid shelf hctvf5586d9 hctvf5586d hctvf5586d hctvf5586d2 hctvf5586d4 hctvf5586d9 hctvf5586d0 construction height 890 mm Front NIROSTA (.40) linen-optic surface individual equipment for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm glass door DIN left, height-adjustable grid shelf, 780 mm glass door DIN right, height-adjustable grid shelf, 780 mm G roll-out drawers hctvf5586a roll-out drawers hctvf5586a2 hctvf5586a hctvf5586a2 hctvf5586a4 hctvf5586a 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom*** hctvf5586a2 hctvf5586a hctvf5586a4 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom valid from July 20 roll-out drawers hctvf5586a2 roll-out drawer/ wing door DIN left hctvf5586a8 roll-out drawers hctvf5586a roll-out drawer/ wing door DIN right hctvf5586a9 hctvf5586a8 hctvf5586a9 zctdiv2 top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN left, eff. height 45 mm top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN right, eff. height 45 mm extra charge for each telescopic full extension drawer instead of roll-out drawer * barrel heights must be observed accordingly; where applicable only 0 l barrel possible *** not possible at 550 mm casing length G/5

121 HAGOLA-compact bar counters (HCT-V) First Class - accessory for the arrangement of an individual refrigerated bar counter hkafs hkafs5 electronic control units for HCT-V, with adapting piece, control-ready assembled electronic control unit type 42, with 60 mm faceplate, NIROSTA (.40) linen-optic surface, construction height 790 mm electronic control unit type 42, with 60 mm faceplate, NIROSTA (.40) linen-optic surface, construction height 890 mm elektronische Steuerung hkafs5 hkafs4 hkafs6 electronic control units for HCT-V, with magnetic valve and adapting piece, control-ready assembled electronic control unit type 42, with 60 mm faceplate, NIROSTA (.40) linen-optic surface, construction height 790 mm electronic control unit type 42, with 60 mm faceplate, NIROSTA (.40) linen-optic surface, construction height 890 mm comfort control type 0 hkasm6 hkasm6 hkasm8 electronic control units for HCT-V, with adapting piece, control-ready assembled comfort control unit type 0, with digital temperature display, alarm function, main switch and additional switch for free application, ST-BUS interface comfort control unit type 2, double control, with digital temperature display, alarm function, independent on-/off-key, w. automatic defrosting, 2 sensors and 2 magnetic valves, ST-BUS interface G cooling unit hkakl2 hkakl hkakl2 hkakl hkakl4 hkakl5 Danfoss-cooling unit (or similar), mounted type TL5/20 W, for or 2 refrig. comp., w. filter dryer, f. refrigerant R4a, intended for expansion valve technique type FR 8.5/72 W, for refrig. comp., w. pressure switch, filter dryer and sight glass, f. refrigerant R4a, intended for expansion valve technique type SC 0/45 W, f. 4 or 2 x 2 refrig. comp., resp. 5 or x 2 x refrig. comp., w. pressure switch, filter dryer and sight glass, f. refrigerant R4a, intended for expansion valve technique type SC 2/605 W, f. 6 or 2 x refrig. comp., w. pressure switch, filter dryer and sight glass, f. refrigerant R4a, intended for expansion valve technique type SC 5/724 W, f. 7 or x and x 4 refrig. comp., w. pressure switch, filter dryer and sight glass, f. refrigerant R4a, intended for expansion valve technique screw coupling hkadiv7 automatic condensate evaporation hkadiv9 automatic condensate evaporation with NIROSTA (.40) condensate tray, installed below the cooling unit hkadiv7 screw couplings screw couplings, mounted base rail 0 x 40 mm zctso zctdiv7 installation costs Running Meters Assembly of the individual modules to one unit in manufacturer s workshop according to customer s requirements zctso base rails/compact base 2 base rails 0 x 40 mm, aluminium, mounted per running metre hkw04727 hkw048 cooling tubs with hole plate cooling tub 472 x 274 mm, without temperature barrier cooling tub 480 x 0 mm, without temperature barrier 5 5 For universal control units, opening (breachs), care products etc., please refer to "accessory" on page H/0. G/6 valid from July 20

122 HAGOLA-compact bar counters (HCT-V) First Class - accessory for the arrangement of an individual refrigerated bar counter grid shelf with clamp left zctrm4 intermediate grid shelf behind midframe zctrl detachable grid zctrl2 zctrm4 zctrm5 zctrm6 zctrl zctrl2 zctfs2 zctdiv zctbl5 zctbl6 zctdiv zctbl zctbl2 zctas zctas zctas8 zctas2 zctas zctas4 additional grids and accessory parts for 600 mm casing depth grid shelf with clamp left, with shelf bracket, mounted in 550/600 mm compartment grid shelf with clamp right, with shelf bracket, mounted in 550/600 mm compartment grid shelf without clamp, with shelf bracket, mounted in 550/600 mm compartment intermediate grid shelf behind midframe, 0 mm width, for 600 mm casing depth detachable grid, 0 mm high, for 600 mm casing depth barrel edge protection for wing door compartment 550 mm width, mounted PVC-separating rod, 47 mm long, for roll-out drawer 550 mm width interior lighting 24 V, incl. cable, bulb and DC power supply, connection left interior lighting 24 V, incl. cable, bulb and DC power supply, connection right direct current supply 20 V, 2 V - 5 VA/24 V - 45 VA, for interior lighting permanent illumination 20 V, for 790/890 mm height, connection left permanent illumination 20 V, for 790/890 mm height, connection right 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 790 mm 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 890 mm support rail, not mounted, f. 600 mm casing depth 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 890 mm, f. GN-bowls 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 790 mm, f. GN-bowls support rail, not mounted, f. 600 mm casing depth, f. GN-bowls locking device for fronts zctdiv42 gripping closure locking for wing door- and roll-out drawer front ("First Class - and "Business Class -refr. bar counters) G valid from July 20 G/7

123 G/8 valid from July 20

124 HAGOLA-compact bar counters (HCT-V) Business Class, refrigeration prepared Description Compact bar counters, refrigeration prepared, inner liner with deep-drawn floor tub as drain tray, efficient refrigeration (expansion valve technique) compact bar counter Business Class, refrigeration prepared Version compact bar counter: - refrigeration prepared - intended for the connection to on-site building s facilities - installed circulating air evaporator with expansion valve technique (R 4a) and condensate tray - assembled refrigerating lines - condensate hose, conducted out of the counter refrigerated casing with centre frame(s): - open refrigerated casing - floor and inner liner in NIROSTA (.40) - hollow chamber profile - outer casing in galvanised steel - deep-drawn floor tub as drain tray - connection of the refrigerating lines and condensate hose optional on left or right side jointless insulation base rail: 40 mm height front: NIROSTA (.40) brushed surface test conditions acc. to EN ISO 295-2, climate class, i.e. ambient temperature 25 C at 60 % relative air humidity; temperature class M2, i.e. +7 C to - C G valid from July 20 G/9

125 HAGOLA-compact bar counters (HCT-V) Business Class, refrigeration prepared Product advantages energy-efficient hollow chamber gaskets with wrinkle-free and hygienic surfaces incl. gripping closure inner liner with deep-drawn floor tub as drain tray G NIROSTA (.40) brushed surface very easy handling due to ergonomic handles, positioned at the highest point of the fronts efficient refrigeration with expansion valve technique (R 4a) casing frame with foam rubber gaskets G/0 valid from July 20

126 HAGOLA-compact bar counters (HCT-V) Business Class, refrigeration prepared especially for draught beer 80/90 790/890 80/90 790/ /74 600/ /74 600/ G valid from July Important remark! In case of a refrigerated cabinet containing several roll-out drawers, a second evaporator is required in order to achieve an optimal circulation of the air (refer to page E/ E/4). G/

127 HAGOLA-compact bar counters (HCT-V) Business Class, refrigeration prepared installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, deep-drawn floor tub as drain tray, casing: 600 mm depth, 790 mm height 550 mm length hctbv hctbv hctbv open casing with 40 mm base rail, 80 mm total height 550 x 790 x 600 mm, refrig. and condensate lines left, refrig. cap. 20 W** 550 x 790 x 600 mm, refrig. and condensate lines right, refrig. cap. 20 W** 00 mm length hctbv0076 hctbv0076 hctbv x 790 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** 00 x 790 x 600 mm, refrig. and condensate lines right, refrig. cap. 240 W** 650 mm length hctbv65076 hctbv65076 hctbv x 790 x 600 mm, refrig. and condensate lines left, refrig. cap. 0 W** 650 x 790 x 600 mm, refrig. and condensate lines right, refrig. cap. 0 W** 2200 mm length hctbv hctbv hctbv x 790 x 600 mm, refrig. and condensate lines left, refrig. cap. 450 W** 2200 x 790 x 600 mm, refrig. and condensate lines right, refrig. cap. 450 W** G 2750 mm length hctbv hctbv hctbv x 790 x 600 mm, refrig. and condensate lines left, refrig. cap. 570 W** 2750 x 790 x 600 mm, refrig. and condensate lines right, refrig. cap. 570 W** for taking up GN-bowls, with installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out at the side, deep-drawn floor tub as drain tray, casing: 600 mm depth, 790 mm height mm length hctbv hctbv hctbv open casing with 40 mm base rail, 80 mm total height x 790 x 600 mm, refrig. and condensate lines right, refrig. cap. 240 W** x 790 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** hctbv hctbv x 790 x 600 mm, refrig. and condensate lines right, refrig. cap. 240 W** 900 x 790 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** 900 mm length hctbv G/2 50 mm length hctbv mm length hctbv50762 ** refrigerating capacity in Watt at -0 C VT hctbv x 790 x 600 mm, refrig. and condensate lines right, refrig. cap. 0 W** hctbv x 790 x 600 mm, refrig. and condensate lines left, refrig. cap. 0 W** For illuminations, control units, DC-power supply etc., please refer to "accessory" on pages G/7-G/8. valid from July 20

128 HAGOLA-compact bar counters (HCT-V) Please choose your individual Business Class -equipment: wing door DIN left with grid shelf hctvb5576d glass door DIN left with grid shelf hctvb5576d9 hctvb5576d hctvb5576d hctvb5576d2 hctvb5576d4 hctvb5576d9 hctvb5576d0 construction height 790 mm front NIROSTA (.40) brushed surface individual equipment for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 680 mm wing door DIN right, height-adjustable grid shelf, eff. height 680 mm wing door DIN left, barrel edge protection, eff. height 680 mm* wing door DIN right, barrel edge protection, eff. height 680 mm* glass door DIN left, height-adjustable grid shelf, eff. height 680 mm glass door DIN right, height-adjustable grid shelf, eff. height 680 mm hctvb5576a2 hctvb5576a hctvb5576a hctvb5576a 2 roll-out drawers, eff. heights: 250 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/00 mm bottom 2 roll-out drawers, eff. heights: 50 mm top/250 mm bottom roll-out drawers, eff. heights: 90 mm top/90 mm centre/75 mm bottom*** roll-out drawers hctvb5576a2 roll-out drawers hctvb5576a hctvb5576a5 hctvb5576a6 hctvb5576a7 2 roll-out drawers with glass pane, eff. heights: 50 mm top/250 mm bottom 2 roll-out drawers with glass pane, eff. heights: 250 mm top/50 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/00 mm bottom roll-out drawers hctvb5576a5 roll-out drawers hctvb5576a7 roll-out drawer/ wing door DIN left hctvb5576a8 roll-out drawer/ wing door DIN right hctvb5576a9 hctvb5576a8 hctvb5576a9 zctdiv2 top: roll-out drawer, eff. height: 250 mm, bottom: wing door DIN left, eff. height 65 mm top: roll-out drawer, eff. height: 250 mm, bottom: wing door DIN right, eff. height 65 mm extra charge for each telescopic full extension drawer instead of roll-out drawer hctvb4576d for holding GN-bowls front NIROSTA (.40) brushed surface individual equipment for the open refrigerated compartments wing door DIN left, with 6 support rails for GN-bowls, eff. height 680 mm G wing door DIN left hctvb4576d hctvb4576d4 wing door DIN right, with 6 support rails for GN-bowls, eff. height 680 mm wing door DIN right hctvb4576d4 hctvb4576a0 telescopic full-ext. drawers, f. 2 x GN-bowls /, 200 mm top and bottom telescopioc full ext. drawers f. 2 x GN-bowls / hctvb4576a0 hctvb4576a9 telescopic full-ext. drawers, f. x GN-bowls /, 50 mm top, centre and bottom valid from July 20 telescopic full ext. drawers for x GN-bowls / hctvb4576a9 * barrel heights must be observed accordingly; where applicable only 0 l barrel possible *** not possible at 550 mm casing length G/

129 HAGOLA-compact bar counters (HCT-V) Business Class, refrigeration prepared installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, deep-drawn floor tub as drain tray, casing: 600 mm depth, 890 mm height 550 mm length hctbv open casing with 40 mm base rail, 90 mm total height hctbv x 890 x 600 mm, refrig. and condensate lines left, refrig. cap. 20 W** hctbv x 890 x 600 mm, refrig. and condensate lines right, refrig. cap. 20 W** 00 mm length hctbv0086 hctbv x 890 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** hctbv x 890 x 600 mm, refrig. and condensate lines right, refrig. cap. 240 W** 650 mm length hctbv65086 hctbv x 890 x 600 mm, refrig. and condensate lines left, refrig. cap. 0 W** hctbv x 890 x 600 mm, refrig. and condensate lines right, refrig. cap. 0 W** 2200 mm length hctbv hctbv x 890 x 600 mm, refrig. and condensate lines left, refrig. cap. 450 W** hctbv x 890 x 600 mm, refrig. and condensate lines right, refrig. cap. 450 W** G 2750 mm length hctbv hctbv x 890 x 600 mm, refrig. and condensate lines left, refrig. cap. 570 W** hctbv x 890 x 600 mm, refrig. and condensate lines right, refrig. cap. 570 W** especially for beer barrels, installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, deep-drawn floor tub as drain tray, front NIROSTA (.40) brushed surface, casing: 600 mm depth, 890 mm height 500 mm length for x 50-l-barrels with turnable midframe hctvbv50086 casing with turnable frame, with 40 mm base rail, 90 mm total height 500 x 890 x 600 mm, refrig. and condensate lines left, hctvbv50086 refrig. cap. 0 W** 500 x 890 x 600 mm, refrig. and condensate lines right, hctvbv refrig. cap. 0 W** 950 mm length for l-barrels with turnable midframe hctvbv x 890 x 600 mm, refrig. and condensate lines left, hctvbv95086 refrig. cap. 450 W** 950 x 890 x 600 mm, refrig. and condensate lines right, hctvbv refrig. cap. 450 W** 2500 mm length for l-barrels with turnable midframe hctvbv x 890 x 600 mm, refrig. and condensate lines left, hctvbv refrig. cap. 540 W** 2500 x 890 x 600 mm, refrig. and condensate lines rights, hctvbv refrig. cap. 540 W** ** refrigerating capacity in Watt at -0 C VT For illuminations, control units, DC-power supply etc., please refer to "accessory" on pages G/7-G/8. G/4 valid from July 20

130 HAGOLA-compact bar counters (HCT-V) Please choose your individual Business Class -equipment: wing door DIN left with grid shelf hctvb5586d glass door DIN left with grid shelf hctvb5586d9 construction height 890 mm front NIROSTA (.40) brushed surface individual equipment for the open refrigerated compartments hctvb5586d wing door DIN left, height-adjustable grid shelf, eff. height 780 mm hctvb5586d wing door DIN right, height-adjustable grid shelf, eff. height 780 mm hctvb5586d2 wing door DIN left, barrel edge protection, eff. height 780 mm hctvb5586d4 wing door DIN right, barrel edge protection, eff. height 780 mm hctvb5586d9 glass door DIN left, height-adjustable grid shelf, eff. height 780 mm hctvb5586d0 glass door DIN right, height-adjustable grid shelf, eff. height 780 mm roll-out drawers hctvb5586a roll-out drawers hctvb5586a2 hctvb5586a hctvb5586a2 hctvb5586a4 hctvb5586a5 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom hctvb5586a2 hctvb5586a hctvb5586a4 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom roll-out drawers hctvb5586a2 roll-out drawers hctvb5586a roll-out drawer/ wing door DIN left hctvb5586a8 roll-out drawer/ wing door DIN right hctvb5586a9 hctvb5586a8 hctvb5586a9 zctdiv2 top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN left, eff. height 45 mm top: roll-out drawer, eff. height: 00 mm, bottom: wing door DIN right, eff. height 45 mm extra charge for each telescopic full extension drawer instead of roll-out drawer G valid from July 20 G/5

131 HAGOLA-compact bar counters (HCT-V) Business Class, refrigeration prepared installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, deep-drawn floor tub as drain tray, casing: 700 mm depth, 890 mm height 00 mm length hctbv0087 open casing with 40 mm base rail, 90 mm total height hctbv x 890 x 700 mm, refrig. and condensate lines left, refrig. cap. 240 W** hctbv x 890 x 700 mm, refrig. and condensate lines right, refrig. cap. 240 W** hctbv x 890 x 700 mm, refrig. and condensate lines left, refrig. cap. 0 W** hctbv x 890 x 700 mm, refrig. and condensate lines right, refrig. cap. 0 W** 650 mm length hctbv65087 hctbv x 890 x 700 mm, refrig. and condensate lines left, refrig. cap. 0 W** hctbv x 890 x 700 mm, refrig. and condensate lines right, refrig. cap. 0 W** 2200 mm length hctbv hctvb5587d hctvb5587d2 construction height 890 mm front NIROSTA (.40) brushed surface individual equipment for the open refrigerated compartments wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm G wing door DIN left hctvb5587d hctvb5587d hctvb5587d4 hctvb5587a2 wing door DIN left, eff. height 780 mm* wing door DIN right, eff. height 780 mm* 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom roll-out drawers hctvb5587a2 hctvb5587a 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom roll-out drawers hctvb5587a hctvb5587a hctvb5587a5 hctvb5587a4 hctvb5587a6 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom 2 telescopic full ext. drawers, eff. heights: 00 mm top/400 mm bottom 2 telescopic full ext. drawers, eff. heights: 50 mm top/50 mm bottom 2 telescopic full ext. drawers, eff. heights: 400 mm top/00 mm bottom roll-out drawers hctvb5587a zctdiv2 extra charge for each telescopic full extension drawer instead of roll-out drawer telescopic full ext. drawers hctvb5587a4 * for hole plates please refer to accessory ** refrigerating capacity in Watt at -0 C VT For illuminations, control units, DC-power supply etc., please refer to "accessory" on pages G/7-G/8. G/6 valid from July 20

132 HAGOLA-compact bar counters (HCT-V) Business Class - accessory for the arrangement of an individual refrigerated bar counter hkabs hkabs5 electronic control units for HCT-V, with adapting piece, control-ready assembled electronic control unit type 42, with 60 mm faceplate, NIROSTA (.40) brushed surface, construction height 790 mm electronic control unit type 42, with 60 mm faceplate, NIROSTA (.40) brushed surface, construction height 890 mm elektronische Steuerung hkabs5 hkabs4 hkabs6 electronic control units for HCT-V, with magnetic valve and adapting piece, control-ready assembled electronic control unit type 42, with 60 mm faceplate, NIROSTA (.40) brushed surface, construction height 790 mm electronic control unit type 42, with 60 mm faceplate, NIROSTA (.40) brushed surface, construction height 890 mm comfort control type 0 hkasm6 hkasm6 electronic control units for HCT-V, with adapting piece, control-ready assembled comfort control unit type 0, with digital temperature display, alarm function, main switch and additional switch for free application, ST-BUS interface cooling unit hkakl6 hkakl2 hkakl6 hkakl7 Danfoss-cooling unit (or similar), mounted type TL5/20 W, for or 2 refrig. comp. (disk evaporator version), current: 20 V/50 Hz/,8 A, w. filter dryer, f. refrigerant R 4a, intended f. capillary tube technique type FR 8.5 GX NO/72 W, f. refrig. comp., current: 20 V/50 Hz/,8 A, w. filter dryer, f. refrigerant R 4a, intended f. capillary tube technique type SC 0 GX NO/45 W, f. 4 refrig. comp., current: 20 V/50 Hz/ 2,7 A, w. filter dryer, f. refrigerant R 4a, intended f. capillary tube technique G base rail 0 x 40 mm zctso automatic condensate evaporation hkadiv9 automatic condensate evaporation with NIROSTA (.40) condensate tray, installed below the cooling unit zctdiv7 installation costs Running Meters Assembly of the individual modules to one unit in manufacturer s workshop according to customer s requirements zctso base rails/compact base 2 base rails 0 x 40 mm, aluminium, mounted per running metre valid from July 20 cooling tubs with hole plate hkw048 cooling tub 480 x 0 mm, without temperature barrier 5 hkw04727 cooling tub 472 x 274 mm, without temperature barrier 5 For universal control units, opening (breachs), care products etc., please refer to "accessory" on page H/0. G/7

133 HAGOLA-compact bar counters (HCT-V) Business Class - accessory for the arrangement of an individual refrigerated bar counter zctrm zctrm2 additional grids and accessory parts for 600 mm or 700 mm casing depth grid shelf w. clamp left, w. shelf bracket, mounted in 450/600 mm comp. grid shelf w. clamp right, w. shelf bracket, mounted in 450/600 mm comp, zctrm grid shelf w/o clamp, w. shelf bracket, mounted in 450/600 mm comp. G grid shelf with clamp left zctrm4 intermediate grid shelf behind midframe zctrl detachable grid zctrl2 zctrm4 zctrm5 zctrm6 zctrl zctrl2 zctrm zctrm4 zctrm5 zctrl zctdiv0 zctdiv zctfs2 zctbl5 zctbl6 zctdiv zctbl zctbl2 zctas zctas zctas5 zctas7 zctas8 zctas2 zctas zctas4 grid shelf with clamp left, with shelf bracket, mounted in 550/600 mm compartment grid shelf with clamp right, with shelf bracket, mounted in 550/600 mm compartment grid shelf without clamp, with shelf bracket, mounted in 550/600 mm compartment intermediate grid shelf behind midframe, 0 mm width, for 600 mm casing depth detachable grid, 0 mm high, for 600 mm casing depth hole plate with clamp left, with shelf bracket, mounted in 550/700 mm BC-compartment hole plate with clamp right, with shelf bracket, mounted in 550/700 mm BC-compartment hole plate without clamp, with shelf bracket, mounted in 550/700 mm BC-compartment intermediate grid shelf behind midframe, 0 mm width, for 700 mm casing depth PVC-separating rod, 7 mm long, for roll-out drawer 450 mm wide PVC-separating rod, 47 mm long, for roll-out drawer 550 mm width barrel edge protection for wing door compartment 550 mm width, mounted interior lighting 24 V, incl. cable, bulb and DC power supply, connection left interior lighting 24 V, incl. cable, bulb and DC power supply, connection right direct current supply 20 V, 2 V - 5 VA/24 V - 45 VA, for interior lighting permanent illumination 20 V, for 790/890 mm height, connection left permanent illumination 20 V, for 790/890 mm height, connection right 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 790 mm 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 890 mm 2 support rails and 2 adjusting rails, mounted, f. 700 mm casing depth, construction height 890 mm, support rail, not mounted, for 700 mm casing depth support rail, not mounted, f. 600 mm casing depth 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 890 mm, f. GN-bowls 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 790 mm, f. GN-bowls support rail, not mounted, f. 600 mm casing depth, f. GN-bowls locking device for fronts zctdiv42 gripping closure locking for wing door- and roll-out drawer front ("First Class - and "Business Class -refr. bar counters) G/8 valid from July 20

134 HAGOLA-compact bar counters (HCT-V) Economy Class, refrigeration prepared Description Compact bar counters, refrigeration prepared, inner liner with smooth floor, efficient refrigeration (expansion valve technique) compact bar counter Economy Class, refrigeration prepared Version compact bar counter: - refrigeration prepared - intended for the connection to on-site building s facilities - installed circulating air evaporator with expansion valve technique (R 4a) and condensate tray - assembled refrigerating lines - condensate hose, conducted out of the counter refrigerated casing with centre frame(s): - open refrigerated casing - floor and inner liner in NIROSTA (.40) - hollow chamber profile - outer casing in galvanised steel - smooth floor - connection of the refrigerating lines and condensate hose optional on left or right side jointless insulation base rail: 40 mm height front: NIROSTA (.40) brushed surface test conditions acc. to EN ISO 295-2, climate class, i.e. ambient temperature 25 C at 60 % relative air humidity; temperature class M2, i.e. +7 C to - C G valid from July 20 G/9

135 HAGOLA-compact bar counters (HCT-V) Economy Class, refrigeration prepared Product advantages energy-efficient hollow chamber gaskets with wrinkle-free and hygienic surfaces incl. snap-fit plate very easy handling due to ergonomic handles, positioned at the highest point of the fronts G NIROSTA (.40) brushed surface efficient refrigeration with expansion valve technique (R 4a) casing frame with foam rubber gaskets G/20 valid from July 20

136 HAGOLA-compact bar counters (HCT-V) Economy Class, refrigeration prepared /64 500/ G valid from July 20 Important remark! In case of a refrigerated cabinet containing several roll-out drawers, a second evaporator is required in order to achieve an optimal circulation of the air (refer to page E/ E/4). G/2

137 HAGOLA-compact bar counters (HCT-V) "Economy Class", refrigeration prepared installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, smooth floor, casing: 500 mm depth, 890 mm height 00 mm length hctev0085 open casing with 40 mm base rail, 90 mm total height hctev x 890 x 500 mm, refrig. and condensate lines left, refrig. cap. 240 W** hctev x 890 x 500 mm, refrig. and condensate lines right, refrig. cap. 240 W** 650 mm length hctev65085 hctev x 890 x 500 mm, refrig. and condensate lines left, refrig. cap. 0 W** hctev x 890 x 500 mm, refrig. and condensate lines right, refrig. cap. 0 W** 2200 mm length hctev hctev x 890 x 500 mm, refrig. and condensate lines left, refrig. cap. 450 W** hctev x 890 x 500 mm, refrig. and condensate lines right, refrig. cap. 450 W** G installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, smooth floor, casing: 600 mm depth, 890 mm height 00 mm length hctev0086 open casing with 40 mm base rail, 90 mm total height hctev x 890 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** hctev x 890 x 600 mm, refrig. and condensate lines right, refrig. cap. 240 W** hctev x 890 x 600 mm, refrig. and condensate lines left, refrig. cap. 0 W** hctev x 890 x 600 mm, refrig. and condensate lines right, refrig. cap. 0 W** 650 mm length hctev65086 hctev x 890 x 600 mm, refrig. and condensate lines left, refrig. cap. 450 W** hctev x 890 x 600 mm, refrig. and condensate lines right, refrig. cap. 450 W** 2200 mm length hctev ** refrigerating capacity in Watt at -0 C VT For illuminations, control units, DC-power supply etc., please refer to "accessory" on pages G/24-G/24. G/22 valid from July 20

138 HAGOLA-compact bar counters (HCT-V) Please choose your individual Economy Class -equipment: hctve5585d hctve5585d2 hctve5585d hctve5585d4 500 mm depth front NIROSTA (.40) brushed surface individual equipment for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff.height 780 mm wing door DIN right, height-adjustable grid shelf, eff.height 780 mm wing door DIN left, barrel edge protection, eff.height 780 mm wing door DIN right, barrel edge protection, eff.height 780 mm wing door DIN left with grid shelf hctve5585d hctve5585d5 hctve5585d6 glass door DIN left, height-adjustable grid shelf, eff.height 780 mm glass door DIN right, height-adjustable grid shelf, eff.height 780 mm glass door DIN left with grid shelf hctve5585d6 hctve5585a2 hctve5585a hctve5585a hctve5585a8 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom roll-out drawers hctve5585a2 roll-out drawers hctve5585a hctve5585a5 hctve5585a6 hctve5585a7 zctdiv2 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom extra charge for each telescopic full extension drawer instead of roll-out drawer roll-out drawers hctve5585a5 wing door DIN left with grid shelf hctve5586d roll-out drawers hctve5585a7 hctve5586d hctve5586d hctve5586d2 hctve5586d4 600 mm Tiefe front NIROSTA (.40) brushed surface individual equipment for the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 780 mm wing door DIN right, height-adjustable grid shelf, eff. height 780 mm wing door DIN left, barrel edge protection, eff. height 780 mm wing door DIN right, barrel edge protection, eff. height 780 mm G hctve5586d5 hctve5586d6 glass door DIN left, height-adjustable grid shelf, eff. height 780 mm glass door DIN right, height-adjustable grid shelf, eff. height 780 mm glass door DIN left with grid shelf hctve5586d5 hctve5586a2 hctve5586a hctve5586a hctve5586a8 2 roll-out drawers, eff. heights: 00 mm top/400 mm bottom 2 roll-out drawers, eff. heights: 50 mm top/50 mm bottom 2 roll-out drawers, eff. heights: 400 mm top/00 mm bottom roll-out drawers, eff. heights: 207 mm top/207 mm centre/250 mm bottom valid from July 20 roll-out drawers hctve5586a2 roll-out drawers hctve5586a5 roll-out drawers hctve5586a roll-out drawers hctve5586a7 hctve5586a5 hctve5586a6 hctve5586a7 zctdiv2 2 roll-out drawers with glass pane, eff. heights: 400 mm top/00 mm bottom 2 roll-out drawers with glass pane, eff. heights: 00 mm top/400 mm bottom 2 roll-out drawers with glass pane, eff. heights: 50 mm top/50 mm bottom extra charge for each telescopic full extension drawer instead of roll-out drawer G/2

139 HAGOLA-compact bar counters (HCT-V) "Economy Class - accessory for the arrangement of an individual refrigerated bar counter electronic control units for HCT-V, with adapting piece, control-ready assembled hkabs5 electronic control unit type 42, with 60 mm faceplate, NIROSTA (.40) brushed surface, construction height 890 mm elektronische Steuerung hkabs5 electronic control units for HCT-V, with adapting piece, control-ready assembled hkasm4 electronic control unit type 9, mounted in protective housing, with automatic defrosting and PTC-sensor, ST-BUS interface control unit type 9 hkasm4 hkakl2 hkakl6 hkakl7 Danfoss-cooling unit (or similar), mounted type TL5/20 W, for or 2 refrig. comp. (disk evaporator version), current: 20 V/50 Hz/,8 A, w. filter dryer, f. refrigerant R 4a, intended f. capillary tube technique type FR 8.5 GX NO/72 W, f. refrig. comp., current: 20 V/50 Hz/,8 A, w. filter dryer, f. refrigerant R 4a, intended f. capillary tube technique type SC 0 GX NO/45 W, f. 4 refrig. comp., current: 20 V/50 Hz/ 2,7 A, w. filter dryer, f. refrigerant R 4a, intended f. capillary tube technique G cooling unit hkakl6 automatic condensate evaporation hkadiv9 automatic condensate evaporation with NIROSTA (.40) condensate tray, installed below the cooling unit zctdiv7 installation costs Running Meters Assembly of the individual modules to one unit in manufacturer s workshop according to customer s requirements base rail 0 x 40 mm zctso zctso base rails/compact base 2 base rails 0 x 40 mm, aluminium, mounted per running metre hkw04727 hkw048 cooling tubs with hole plate cooling tub 472 x 274 mm, without temperature barrier cooling tub 480 x 0 mm, without temperature barrier 5 5 For universal control units, opening (breachs), care products etc., please refer to "accessory" on page H/0. G/24 valid from July 20

140 HAGOLA-compact bar counters (HCT-V) "Economy Class - accessory for the arrangement of an individual refrigerated bar counter grid shelf with clamp left zctrm4 intermediate grid shelf behind midframe zctrl detachable grid zctrl2 zctrm7 zctrm20 zctrm2 zctrl20 zctrm4 zctrm5 zctrm6 zctrl zctrl2 zctdiv zctbl5 zctbl6 zctdiv zctbl zctbl2 zctas zctas8 zctas2 zctas4 additional grids and accessory parts for 500 mm or 600 mm casing depth grid shelf with clamp left, with shelf bracket, mounted in 550/500 mm EC-compartment grid shelf with clamp right, with shelf bracket, mounted in 550/500 mm EC-compartment grid shelf without clamp, with shelf bracket, mounted in 550/500 mm EC-compartment detachable grid, 0 mm high, for 500 mm casing depth grid shelf with clamp left, with shelf bracket, mounted in 550/600 mm compartment grid shelf with clamp right, with shelf bracket, mounted in 550/600 mm compartment grid shelf without clamp, with shelf bracket, mounted in 550/600 mm compartment intermediate grid shelf behind midframe, 0 mm width, for 600 mm casing depth detachable grid, 0 mm high, for 600 mm casing depth PVC-separating rod, 47 mm long, for roll-out drawer 550 mm width interior lighting 24 V, incl. cable, bulb and DC power supply, connection left interior lighting 24 V, incl. cable, bulb and DC power supply, connection right direct current supply 20 V, 2 V - 5 VA/24 V - 45 VA, for interior lighting permanent illumination 20 V, for 790/890 mm height, connection left permanent illumination 20 V, for 790/890 mm height, connection right 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 890 mm support rail, not mounted, f. 600 mm casing depth 2 support rails and 2 adjusting rails, mounted, f. 600 mm casing depth, construction height 890 mm, f. GN-bowls support rail, not mounted, f. 600 mm casing depth, f. GN-bowls locking device for fronts zctdiv9 cylinder lock for wing door- or roll-out drawer front ("Economy Class -refr. bar counters) G valid from July 20 G/25

141 G/26 valid from July 20

142 HAGOLA-compact bar counters (HCT-V) undercounter, refrigeration prepared Description Compact bar counters, refrigeration prepared, with new, worldwide patented closure system, inner liner with deep-drawn floor tub as drain tray or with floor drain and integrated odour trap, efficient refrigeration compact bar counter for the substructure, refrigeration prepared First Class refrigerated bar counter for the substructure (undercounter) front: NIROSTA (.40) linen-optic surface Business Class refrigerated bar counter for the substructure (undercounter) front: NIROSTA (.40) brushed surface H valid from July 20 refrigerated casing with centre frame(s): - open refrigerated casing - floor and inner liner in NIROSTA (.40) - hollow chamber profile - outer casing in galvanised steel - deep-drawn floor with floor drain and integrated odour trap connection of the refrigerating lines and floor drain optional on left or right side jointless insulation base rail: 40 mm height circulating air evaporator with expansion valve technique (R 4a) and condensate tray refrigerated casing with centre frame(s): - open refrigerated casing - floor and inner liner in NIROSTA (.40) - hollow chamber profile - outer casing in galvanised steel - deep-drawn floor tub as drain tray connection of the refrigerating lines and floor drain optional on left or right side jointless insulation base rail: 40 mm height circulating air evaporator with expansion valve technique (R 4a) and condensate tray NIROSTA is a registered trademark of ThyssenKrupp Nirosta H/

143 HAGOLA-compact bar counters (HCT-V) undercounter, refrigeration prepared Product advantages energy-efficient hollow chamber gaskets with wrinkle-free and hygienic surfaces incl. gripping closure very easy handling due to ergonomic handles, positioned at the highest point of the fronts interior lighting (option) First Class : inner liner with deep-drawn floor tub and drain with integrated odour trap, connection optional on left or right side H efficient refrigeration with expansion valve technique (R 4a) Business Class : inner liner with deep-drawn floor tub as drain tray H/2 casing frame with foam rubber gaskets NIROSTA is a registered trademark of ThyssenKrupp Nirosta valid from July 20

144 HAGOLA-compact bar counters (HCT-V) undercounter, refrigeration prepared First Class / Business Class casing: 600 mm depth, 525 mm height 465/ /525 First Class / Business Class casing: 600/700 mm depth, 425/525 mm height / / /700 64/ H valid from July 20 NIROSTA is a registered trademark of ThyssenKrupp Nirosta H/

145 HAGOLA-compact bar counters (HCT-V) First Class / Business Class - undercounter, refrigeration prepared First Class installed circulating air evaporator (expansion valve technique), mounted refrig. lines conducted out on left or right side, deep-drawn floor tub, drain with integrated odour trap, casing: 600 mm depth, 525 mm height hctfv hctfv open casing with 40 mm base rail, 565 mm total height 900 x 525 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 240 W** 900 x 525 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 240 W** 900 mm width hctfv hctfv5056 hctfv x 525 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 240 W** 50 x 525 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 240 W** 50 mm width hctfv506 hctfv80056 hctfv x 525 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 240 W** 800 x 525 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 240 W** 800 mm width hctfv80056 H "Business Class installed circulating air evaporator (expansion valve technique), mounted refrig. lines conducted out on left or right side, deep-drawn floor tub as drain tray, casing: 600 mm depth, 525 mm height 900 mm width hctbv open casing with 40 mm base rail, 565 mm total height hctbv x 525 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 240 W** hctbv x 525 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 240 W** 50 mm width hctbv5056 hctbv x 525 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 240 W** hctbv x 525 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 240 W** ** refrigerating capacity in Watt at -0 C VT For illuminations, control units, DC-power supply etc., please refer to "accessory" on page H/0. H/4 800 mm width hctbv80056 hctbv x 525 x 600 mm, drain, refrig. and condensate lines left, refrig. cap. 240 W** hctbv x 525 x 600 mm, drain, refrig. and condensate lines right, refrig. cap. 240 W** NIROSTA is a registered trademark of ThyssenKrupp Nirosta valid from July 20

146 HAGOLA-compact bar counters (HCT-V) Please choose your individual equipment: hctvf4556d First Class front NIROSTA (.40) linen-optic surface individual equipment of the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height, NH 45 mm wing door DIN left with grid shelf hctvf4556d hctvf4556d2 wing door DIN right, height-adjustable grid shelf, eff. height, NH 45 mm wing door DIN right with grid shelf hctvf4556d2 hctvf4556a hctvf4556a2 hctvf4556a4 roll-out drawer, eff. height 400 mm telescopic full extension drawer, eff. height 400 mm 2 telescopic full extension drawers for GN-bowls /, up to eff. height 00 mm top/00 mm bottom telescopic full ext. drawers hctvf4556a4 wing door DIN left with grid shelf hctvb4556d hctvb4556d Business Class front NIROSTA (.40) brushed surface individual equipment of the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height, NH 45 mm H hctvb4556d2 wing door DIN right, height-adjustable grid shelf, eff. height, NH 45 mm wing door DIN right with grid shelf hctvb4556d2 hctvb4556a hctvb4556a2 roll-out drawer, eff. height 400 mm telescopic full extension drawer, eff. height 400 mm roll-out drawer hctvb4556a valid from July 20 telescopic full ext. drawers hctvb4556a4 hctvb4556a4 2 telescopic full extension drawers for GN-bowls /, up to eff. height 00 mm top/00 mm bottom NIROSTA is a registered trademark of ThyssenKrupp Nirosta H/5

147 HAGOLA-compact bar counters (HCT-V) Business Class - undercounter, refrigeration prepared installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, deep-drawn floor tub as drain tray, casing: 600 mm depth, 525 mm height open casing with 40 mm base rail, 565 mm total height hctbv x 525 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** hctbv x 525 x 600 mm, refrig. and condensate lines right, refrig. cap. 240 W** 00 mm width hctbv0056 hctbv x 525 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** hctbv x 525 x 600 mm, refrig. and condensate lines right, refrig. cap. 240 W** 650 mm width hctbv65056 especiall for baking tins 400/600 mm, installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, deep-drawn floor tub as drain tray, casing: 700 mm depth, 525 mm height H 00 mm width hctbv0057 open casing with 40 mm base rail, 565 mm total height hctbv x 525 x 700 mm, refrig. and condensate lines left, refrig. cap. 240 W** hctbv x 525 x 700 mm, refrig. and condensate lines right, refrig. cap. 240 W** hctbv x 525 x 700 mm, refrig. and condensate lines left, refrig. cap. 240 W** hctbv x 525 x 700 mm, refrig. and condensate lines right, refrig. cap. 240 W** 650 mm width hctbv65057 ** refrigerating capacity in Watt at -0 C VT For illuminations, control units, DC-power supply etc., please refer to "accessory" on page H/0. H/6 NIROSTA is a registered trademark of ThyssenKrupp Nirosta valid from July 20

148 HAGOLA-compact bar counters (HCT-V) Please choose your individual equipment: hctvb5556d Business Class front NIROSTA (.40) brushed surface individual equipment of the open refrigerated compartments wing door DIN left, height-adjustable grid shelf, eff. height 45 mm wing door DIN left hctvb5556d hctvb5556d2 wing door DIN right, height-adjustable grid shelf, eff. height 45 mm wing door DIN right hctvb5556d2 hctvb5556a hctvb5556a2 roll-out drawer, eff.height 400 mm telescopic full extension drawer, eff. height 400 mm roll-out drawer hctvb5556a wing door DIN left for baking tins hctvf5557d hctvf5557d hctvf5557d2 hctvf5557a hctvf5557a hctvf5557a2 hctvf5557a4 First Class front NIROSTA (.40) linen-optic surface individual equipment of the open refrigerated compartments wing door DIN left, eff. height 45 mm* wing door DIN right, eff. height 45 mm* roll-out drawer, eff. height 400 mm roll-out drawer with glass pane, eff. height 400 mm telescopic full extension drawer, eff. height 400 mm 2 telescopic full extension drawers, eff. height 65 mm top/65 mm bottom H wing door DIN right for baking tins hctvf5557d2 roll-out drawer hctvf5557a hctvb5557d hctvb5557d2 hctvb5557a hctvb5557a hctvb5557a2 hctvb5557a4 zctas zctas7 Business Class front NIROSTA (.40) brushed surface individual equipment of the open refrigerated compartments wing door DIN left, eff.height 45 mm* wing door DIN right, eff.height 45 mm* roll-out drawer, eff. height 400 mm roll-out drawer with glass pane, eff. height 400 mm telescopic full ext. drawer, eff. height 400 mm 2 telescopic full ext. drawers, eff. heights 65 mm top/65 mm bottom support rails 2 support rails and 2 adjusting rails, mounted, f. 700 mm casing depth, construction height 525 mm (for holding baking tins) support rail, not mounted, f. 700 mm casing depth (for holding baking tins) valid from July 20 roll-out drawer hctvf5557a * for hole plates please refer to accessory NIROSTA is a registered trademark of ThyssenKrupp Nirosta H/7

149 HAGOLA-compact bar counters (HCT-V) "First Class - for the substructure, refrigeration prepared "First Class installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, deep-drawn floor tub, drain with integrated odour trap, casing: 600 mm depth, 425 mm height hctfv hctfv open casing with 40 mm base rail, 465 mm total height 900 x 425 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** 900 x 425 x 600 mm, refrig. and condensate lines right, refrig. cap. 240 W** 900 mm width hctfv hctfv5046 hctfv x 425 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** 50 x 425 x 700 mm, refrig. and condensate lines right, refrig. cap. 240 W** 50 mm width hctfv5046 hctfv80046 hctfv x 425 x 600 mm, refrig. and condensate lines left, refrig. cap. 240 W** 800 x 425 x 600 mm, refrig. and condensate lines right, refrig. cap. 240 W** 800 mm width hctfv80046 H especially for baking tins 400/600 mm, installed circulating air evaporator (expansion valve technique), assembled refrigerating lines and condensate drain conducted out on left or right side, deep-drawn floor tub as drain tray, casing: 700 mm depth, 425 mm height 00 mm width hctfv0047 hctfv0047 hctfv00472 open casing with 40 mm base rail, 465 mm total height 00 x 425 x 700 mm, refrig. and condensate lines left, refrig. cap. 240 W** 00 x 425 x 700 mm, refrig. and condensate lines right, refrig. cap. 240 W** hctfv65047 hctfv x 425 x 700 mm, refrig. and condensate lines left, refrig. cap. 240 W** 650 x 425 x 700 mm, refrig. and condensate lines right, refrig. cap. 240 W** 650 mm width hctfv65047 ** refrigerating capacity in Watt at -0 C VT For illuminations, control units, DC-power supply etc., please refer to "accessory" on page H/0. H/8 NIROSTA is a registered trademark of ThyssenKrupp Nirosta valid from July 20

150 HAGOLA-compact bar counters (HCT-V) Please choose your individual equipment: hctvf4546d hctvf4546d2 hctvf4546a hctvf4546a2 First Class front NIROSTA (.40) linen-optic surface individual equipment of the open refrigerated compartments wing door DIN left, eff. height 5 mm wing door DIN right, eff. height 5 mm roll-out drawer, eff. height 00 mm telescopic full ext. drawer, eff. height 00 mm wing door DIN left hctvf4546d wing door DIN right hctvf4546d2 hctvb4546d hctvb4546d2 hctvb4546a hctvb4546a2 Business Class front NIROSTA (.40) brushed surface individual equipment of the open refrigerated compartments wing door DIN left, eff. height 5 mm wing door DIN right, eff. height 5 mm roll-out drawer, eff. height 00 mm telescopic full ext. drawer, eff. height 00 mm roll-out drawer hctvf4546a wing door DIN left hctvf5547d hctvf5547d hctvf5547d2 hctvf5547a hctvf5547a2 hctvf5547a First Class front NIROSTA (.40) linen-optic surface individual equipment of the open refrigerated compartments wing door DIN left, eff. height 5 mm* wing door DIN right, eff. height 5 mm* roll-out drawer, eff. height 00 mm roll-out drawer with glass pane, eff. height 00 mm telescopic full extension drawer, eff. height 00 mm H valid from July 20 wing door DIN right hctvf5547d2 roll-out drawer hctvf5547a roll-out drawer hctvf5547a2 hctvb5547d hctvb5547d2 hctvb5547a hctvb5547a2 hctvb5547a zctas zctas7 * for hole plates please refer to accessory Business Class front NIROSTA (.40) brushed surface individual equipment of the open refrigerated compartments wing door DIN left, eff. height 5 mm* wing door DIN right, eff. height 5 mm* roll-out drawer, eff. height 00 mm roll-out drawer, eff. height 00 mm telescopic full extension drawer, eff. height 00 mm support rails 2 support rails and 2 adjusting rails, mounted, f. 700 mm casing depth, construction height 525 mm (for holding baking tins) support rail, not mounted, f. 700 mm casing depth (for holding baking tins) NIROSTA is a registered trademark of ThyssenKrupp Nirosta H/9

151 HAGOLA-compact bar counters (HCT-V) accessory zctrm zctrm2 additional grids and accessory parts for 600 mm or 700 mm casing depth grid shelf w. clamp left, w. shelf bracket, mounted in 450/600 mm comp. grid shelf w. clamp right, w. shelf bracket, mounted in 450/600 mm comp, H intermediate grid shelf behind midframe zctrl detachable grid zctrl2 comfort control type 0 hkasm6 glass pressure rinser zsagd4 zctrm zctrl zctrl2 zctrm zctrm4 zctrm5 zctrl zctdiv0 zctdiv zctbl5 zctbl6 zctbl zctbl2 zctdiv zctas9 zctas zctas8 zctas7 hkasm6 hkasm8 hkasm44 hkasm grid shelf w/o clamp, w. shelf bracket, mounted in 450/600 mm comp. intermediate grid shelf behind midframe, 0 mm width, for 600 mm casing depth detachable grid, 0 mm high, for 600 mm casing depth hole plate with clamp left, with shelf bracket, mounted in 550/700 mm BC-compartment hole plate with clamp right, with shelf bracket, mounted in 550/700 mm BC-compartment hole plate without clamp, with shelf bracket, mounted in 550/700 mm BC-compartment intermediate grid shelf behind midframe, 0 mm width, for 700 mm casing depth PVC-separating rod, 7 mm long, for roll-out drawer 450 mm wide PVC-separating rod, 47 mm long, for roll-out drawer 550 mm width interior lighting 24 V, incl. cable, bulb and DC power supply, connection left interior lighting 24 V, incl. cable, bulb and DC power supply, connection right permanent illumination 20 V, for 520 mm height, connection left permanent illumination 20 V, for 520 mm height, connection right direct current supply 20 V, 2 V - 5 VA/24 V - 45 VA, for interior lighting 2 support and 2 adjusting rails, mounted, for 600 mm casing depth, construction height 525 mm 2 support rails and 2 adjusting rails, mounted, f. 700 mm casing depth, construction height 525 mm (for holding baking tins) support rail, not mounted, f. 600 mm casing depth support rail, not mounted, f. 700 mm casing depth (for holding baking tins) electronic control units for HCT-V comfort control unit type 0, with digital temperature display, one programmable switch and main switch comfort control unit type 2, double control, with digital temperature display, magnet valves and main switch electronic control type 42, with digital temperature display, with automatic defrosting and sensor, vertical installation comfort control type 60, triple control, with digital temperature display, main switch and magnet valves hkasm4 electronic control type 6, triple control, with digital temperature display hkadiv0 hkadiv25 magnet valve for multiple control, with pressostat, mounted magnet valve for multiple control, with pressostat, not mounted basin mixer for double sinks zsamb7 zctdb zctdb2 zctdb zctdb4 zctdb5 zctdb6 zctdb7 openings in the refrigerated casing with plastic frame nominal-ø 40 mm, frame edge Ø 00 mm nominal-ø 50 mm, frame edge Ø 0 mm nominal-ø 60 mm, frame edge Ø 0 mm nominal-ø 75 mm, frame edge Ø 0 mm nominal-ø 00 mm, frame edge Ø 50 mm nominal-ø 5 mm, frame edge Ø 70 mm counterpart sleeve to frame, nominal-ø 00 mm zsadiv2 cleaning brush cleaning brush for drip depression-/floor drain, with Bowden cable, 00 mm long care product Wenol finish hmediv0 H/0 locking device for fronts zctdiv42 gripping closure locking for wing door- and roll-out drawer front ("First Class - and "Business Class -refr. bar counters) hepdiv8 hmediv0 stainless steel care product HAGOLA-stainless steel cleaning spray, 500 ml care product, finish for brass, 00 ml NIROSTA is a registered trademark of ThyssenKrupp Nirosta 6 6 valid from July 20

152 HAGOLA-neutral bar counters (HTT) neutral bar counters Description Neutral bar counters, completely in NIROSTA (.40) or casing in plastic-coated decor plate, as programme enhancement to refrigerated bar counters or warming-up cabinets neutral bar counter, open module, casing in NIROSTA neutral bar counter, sink substructure, casing in plastic-coated decor plate Version: casing: NIROSTA (.40) brushed surface or 9 mm plastic-coated decor plate V00, with surrounding 2 mm strong softline-edge front: NIROSTA (.40) linen-optic surface or brushed surface choice of modules: - open modules for GN-bowls, dishwasher racks, intermediate shelves - modules with wing doors, roll-out drawers, drawers, tilting waste bins, waste bin drawer, drawers with cutlery- or coin trays, electrical cash registers, drawers for coffee grounds - special modules for beverage containers (e.g. non-alcoholic beverages), sink substructures or high capacity waste bin box (self-extinguishing) open modules and modules with wing door in NIROSTA - finish with deep-drawn beadings as supporter for intermediate shelves and GN-bowls easy cleaning high hygiene standard I valid from July 20 Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/

153 HAGOLA-neutral bar counters (HTT) neutral bar counters Product advantages designer handle smooth casing frame jointless internal sides and surfaces in NIROSTA brushed surface lockable drawers/roll-out drawers (optional) full-extension drawers for dishwasher racks 400 x 400 mm 500 x 500 mm I drawer tubs in NIROSTA (.40) waste bin drawer incl. stowage compartment drawer with cutlery- or coin trays tilting waste bin (full casing height) I/2 electric drawer for all common cash register systems and cash registers deep-drawn beadings as supporter for intermediate shelves or GN-bowls valid from July 20

154 HAGOLA-neutral bar counters (HTT) First Class, sink substructure, construction height 525 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth httbh4056o sink substructures open, casing: plastic-coated decor plate 400 x 525 x 600 mm (wxhxd), open sink substructure httbh4056o machine compartment DIN left httfm9 httbn4056o sink substructures open, casing: NIROSTA (.40) 400 x 525 x 600 mm (wxhxd), open sink substructure httbn4056o machine compartment DIN left httfm9 httfm9 httfm0 front mounted on sink substructure machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 I valid from July 20 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact bases and adapting pieces, please refer to "accessory for sink substructures" on page I/0. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/

155 HAGOLA-neutral bar counters (HTT) First Class, sink substructure, construction height 790 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth httfh4076o httfh5076o httfh8076o sink substructures open, casing: plastic-coated decor plate 400 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open 500 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open 800 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open sink substructure httfh4076o machine compartment DIN left httfm httfn4076o httfn5076o httfn8076o sink substructures open, casing: NIROSTA (.40) 400 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open 500 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open 800 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open httfh4076o2 httfh5076o2 non-refrigerated bar counters with drawer, bottom: open, casing: plastic-coated decor plate 400 x 790 x 600 (wxhxd), top: drawer, bottom: open 500 x 790 x 600 (wxhxd), top: drawer, bottom: open I sink substructure httfn4076o2 machine compartment DIN left httfm sink substructure httfn8076o wing door DIN left httfd tilting waste bin httfp httfn4076o2 httfn5076o2 httfd httfd2 httfp httfz httfa httfm httfm2 httfm httfm4 httfm httfm2 httfm httfm4 non-refrigerated bar counters with drawer, bottom: open, casing: NIROSTA (.40) 400 x 790 x 600 (wxhxd), top: drawer, bottom: open 500 x 790 x 600 (wxhxd), top: drawer, bottom: open front mounted on sink substructure, for compartment widths: 400/800 mm wing door DIN left, for sink substructure, eff. heigth 90 mm wing door DIN right, for sink substructure, eff. heigth 90 mm tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l roll-out drawer, for sink substructure, eff. height 95 mm machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 wing door DIN left sink substructure httfd roll-out drawer sink substructure httfa2 waste bin drawer sink substructure httfz I/4 tilting waste bin sink substructure httfp2 machinecompartment door DIN left httfm5 httfd httfd4 httfp2 httfz2 httfa2 httfm5 httfm6 httfm7 httfm8 httfm5 httfm6 httfm7 httfm8 front mounted on sink substructure, for compartment width: 500 mm wing door DIN left, for sink substructure, eff. heigth 90 mm wing door DIN right, for sink substructure, eff. heigth 90 mm tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l roll-out drawer, for sink substructure, eff. height 95 mm machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact bases and adapting pieces, please refer to "accessory for sink substructures" on page I/0. valid from July 20

156 HAGOLA-neutral bar counters (HTT) First Class, sink substructure, construction height 890 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth httfh4086o2 httfh5086o2 httfh8086o2 httfn4086o2 httfn5086o2 httfn8086o2 sink substructure httfh4086o2 machine compartment DIN left httfm httfh4086o httfh5086o httfn4086o httfn5086o sink substructures open, casing: plastic-coated decor plate 400 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open 500 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open 800 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open sink substructures open, casing: NIROSTA (.40) 400 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open 500 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open 800 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open non-refrigerated bar counters with drawer, bottom: open, casing: plastic-coated decor plate 400 x 890 x 600 (wxhxd), top: drawer, bottom: open 500 x 890 x 600 (wxhxd), top: drawer, bottom: open non-refrigerated bar counters with drawer, bottom: open, casing: NIROSTA (.40) 400 x 890 x 600 (wxhxd), top: drawer, bottom: open 500 x 890 x 600 (wxhxd), top: drawer, bottom: open valid from July 20 sink substructure httfn4086o machine compartment DIN left httfm sink substructure httfn8086o2 wing door DIN left httfd tilting waste bin httfp wing door DIN left sink substructure httfd roll-out drawer tilting waste bin sink substructure sink substructure httfa2 httfp2 waste bin drawer sink substructure httfz machinecompartment door DIN left httfm5 httfd httfd2 httfp httfz httfa httfm httfm2 httfm httfm4 httfm httfm2 httfm httfm4 httfd httfd4 httfp2 httfz2 httfa2 httfm5 httfm6 httfm7 httfm8 httfm5 httfm6 httfm7 httfm8 front mounted on sink substructure, for compartment widths: 400/800 mm wing door DIN left, for sink substructure, eff. heigth 90 mm wing door DIN right, for sink substructure, eff. heigth 90 mm tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l roll-out drawer, for sink substructure, eff. height 95 mm machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 front mounted on sink substructure, for compartment width: 500 mm wing door DIN left, for sink substructure, eff. heigth 90 mm wing door DIN right, for sink substructure, eff. heigth 90 mm tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l roll-out drawer, for sink substructure, eff. height 95 mm machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact bases and adapting pieces, please refer to "accessory for sink substructures" on page I/0. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/5 I

157 HAGOLA-neutral bar counters (HTT) Business Class, sink substructure, construction height 525 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth httbh4056o sink substructures open, casing: plastic-coated decor plate 400 x 525 x 600 mm (wxhxd), open sink substructure httbh4056o machine compartment DIN left httfm9 httbn4056o sink substructures open, casing: NIROSTA (.40) 400 x 525 x 600 mm (wxhxd), open sink substructure httbn4056o machine compartment DIN left httfm9 httbm9 httbm0 front mounted on sink substructure machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 I Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact bases and adapting pieces, please refer to "accessory for sink substructures" on page I/0. I/6 valid from July 20

158 HAGOLA-neutral bar counters (HTT) Business Class, sink substructure, construction height 790 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth httbh4076o httbh5076o httbh8076o sink substructures open, casing: plastic-coated decor plate 400 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open 500 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open 800 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open sink substructure httbh4076o machine compartment DIN left httbm httbn4076o httbn5076o httbn8076o sink substructures open, casing: NIROSTA (.40) 400 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open 500 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open 800 x 790 x 600 mm (wxhxd), top: combi sink panel, bottom: open httbh4076o2 httbh5076o2 non-refrigerated bar counters with drawer, bottom: open, casing: plastic-coated decor plate 400 x 790 x 600 (wxhxd), top: drawer, bottom: open 500 x 790 x 600 (wxhxd), top: drawer, bottom: open sink substructure httbn4076o2 machine compartment DIN left httbm httbn4076o2 httbn5076o2 non-refrigerated bar counters with drawer, bottom: open, casing: NIROSTA (.40) 400 x 790 x 600 (wxhxd), top: drawer, bottom: open 500 x 790 x 600 (wxhxd), top: drawer, bottom: open sink substructure httbn8076o wing door DIN left httbd tilting waste bin httbp httbd httbd2 httbp httbz httba httbm httbm2 httbm httbm4 httbm httbm2 httbm httbm4 front mounted on sink substructure, for compartment widths: 400/800 mm wing door DIN left, for sink substructure, eff. height 90 mm wing door DIN right, for sink substructure, eff. height 90 mm tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l roll-out drawer, for sink substructure, eff. height 95 mm machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 I valid from July 20 wing door DIN left sink substructure httbd roll-out drawer sink substructure httba2 waste bin drawer sink substructure httbz tilting waste bin sink substructure httbp2 machine compartment door DIN left httbm5 httbd httbd4 httbp2 httbz2 httba2 httbm5 httbm6 httbm7 httbm8 httbm5 httbm6 httbm7 httbm8 front mounted on sink substructure, for compartment width: 500 mm wing door DIN left, for sink substructure, eff. height 90 mm wing door DIN right, for sink substructure, eff. height 90 mm tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l roll-out drawer, for sink substructure, eff. height 95 mm machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact bases and adapting pieces, please refer to "accessory for sink substructures" on page I/0. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/7

159 HAGOLA-neutral bar counters (HTT) Business Class, sink substructure, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth httbh4086o2 httbh5086o2 httbh8086o2 sink substructures open, casing: plastic-coated decor plate 400 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open 500 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open 800 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open sink substructure httbh4086o2 machine compartment DIN left httbm httbn4086o2 httbn5086o2 httbn8086o2 sink substructures open, casing: NIROSTA (.40) 400 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open 500 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open 800 x 890 x 600 (wxhxd), top: combi sink panel, bottom: open httbh4086o httbh5086o non-refrigerated bar counters with drawer, bottom: open, casing: plastic-coated decor plate 400 x 890 x 600 (wxhxd), top: drawer, bottom: open 500 x 890 x 600 (wxhxd), top: drawer, bottom: open I sink substructure httbn4086o machine compartment DIN left httbm sink substructure httbn8086o2 wing door DIN left httbd tilting waste bin httbp wing door DIN left sink substructure httbd roll-out drawer sink substructure httba2 waste bin drawer sink substructure httbz I/8 tilting waste bin sink substructure httbp2 machine compartment door DIN left httbm5 httbn4086o httbn5086o httbd httbd2 httbp httbz httba httbm httbm2 httbm httbm4 httbm httbm2 httbm httbm4 httbd httbd4 httbp2 httbz2 httba2 httbm5 httbm6 httbm7 httbm8 httbm5 httbm6 httbm7 httbm8 non-refrigerated bar counters with drawer, bottom: open, casing: NIROSTA (.40) 400 x 890 x 600 (wxhxd), top: drawer, bottom: open 500 x 890 x 600 (wxhxd), top: drawer, bottom: open front mounted on sink substructure, for compartment widths: 400/800 mm wing door DIN left, for sink substructure, eff. height 90 mm wing door DIN right, for sink substructure, eff. height 90 mm tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l roll-out drawer, for sink substructure, eff. height 95 mm machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 front mounted on sink substructure, for compartment width: 500 mm wing door DIN left, for sink substructure, eff. height 90 mm wing door DIN right, for sink substructure, eff. height 90 mm tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l roll-out drawer, for sink substructure, eff. height 95 mm machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for TL 5 - SC 2 machine compartment door DIN left, for sink substructure, intended for SC 5 - SC 2 machine compartment door DIN right, for sink substructure, intended for SC 5 - SC 2 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact bases and adapting pieces, please refer to "accessory for sink substructures" on page I/0. valid from July 20

160 HAGOLA-neutral bar counters (HTT) "Economy Class", sink substructure, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth htteh4086o htteh8086o sink substructures open, casing: plastic-coated decor plate 400 x 890 x 600 mm (wxhxd), open 800 x 890 x 600 mm (wxhxd), open sink substructure htteh4086o machine compartment DIN left httem htten4086o htten8086o sink substructures open, casing: NIROSTA (.40) 400 x 890 x 600 mm (wxhxd), open 800 x 890 x 600 mm (wxhxd), open sink substructure htten4086o machine compartmen DIN left httem htted htted4 httep2 httez2 httem httem2 front mounted on sink substructure, for compartment widths: 400/800 mm wing door DIN left, for sink substructure, eff. height 760 mm wing door DIN right, for sink substructure, eff. height 760 mm tilting waste bin, for sink substructure, x 20 l waste bin drawer, for sink substructure, 2 x 6,5 l machine compartment door DIN left, for sink substructure machine compartment door DIN right, for sink substructure I valid from July 20 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact bases and adapting pieces, please refer to "accessory for sink substructures" on page I/0. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/9

161 HAGOLA-neutral bar counters (HTT) accessory for sink substructures base rail 20 x 20 mm zctso base rail 0 x 40 mm zctso base rails/compact base zctso pair of base rails 20 x 20 mm, aluminium, mounted per running metre zctso pair of base rails 0 x 40 mm, aluminium, mounted per running metre zctso8 pair of base rails 60 x 50 mm, aluminium, mounted per running metre zctso4 compact base, blind panel Tacon black, 00 mm high, with adjustable legs from 85 to 50 mm height, per running metre zctso6 compact base, blind panel covered w. NIROSTA (.40) linen-optic surface, 00 mm high, w. adjustable legs from 85 to 50 mm height, per running metre zctso5 compact base, blind panel covered w. NIROSTA (.40) brushed surface, 00 mm high, w. adjustable legs from 85 to 50 mm height, per running metre zctso7 compact base, blind panel covered w. aluminium (stainless steel optics), 00 mm high, w. adjustable legs from 85 to 50 mm height, per running metre zctpg24 zctpg0 adapting pieces for construction height 520 mm "First Class" straight faceplate, 00 x 520 mm (wxh), NIROSTA (.40) linen-optic surface straight faceplate, with cut-out for control unit type 42, 60 x 520 mm (WxH), NIROSTA (.40) linen-optic surface compact base 00 mm high zctso6 zctpg0 zctpg zctpg27 adapting pieces for construction height 790 mm "First straight faceplate, 00 x 790 mm (wxh), NIROSTA Class" (.40) linen-optic surface straight faceplate, 50 x 790 mm (wxh), NIROSTA (.40) linen-optic surface straight faceplate, with cut-out for control unit type 42, 60 x 790 mm (WxH), NIROSTA (.40) linen-optic surface zctpg4 zctpg5 zctpg28 adapting pieces for construction height 890 mm "First straight faceplate, 00 x 890 mm (wxh), NIROSTA Class" (.40) linen-optic surface straight faceplate, 50 x 890 mm (wxh), NIROSTA (.40) linen-optic surface straight faceplate, with cut-out for control unit type 42, 60 x 890 mm (WxH), NIROSTA (.40) linen-optic surface I straight faceplate with cut-out for control unit type 42 zctpg25 zctpg2 zctpg29 adapting pieces for construction height 520 mm "Business Class" straight faceplate, 00 x 520 mm (wxh), NIROSTA (.40) brushed surface straight faceplate, with cut-out for control unit type 42, 60 x 520 mm (WxH), NIROSTA (.40) brushed surface adapting pieces for construction height 790 mm "Business Class" zctpg2 straight faceplate, 00 x 790 mm (wxh), NIROSTA (.40) brushed surface zctpg zctpg25 straight faceplate, 50 x 790 mm (wxh), NIROSTA (.40) brushed surface straight faceplate, with cut-out for control unit type 42, 60 x 790 mm (WxH), NIROSTA (.40) brushed surface zctpg6 zctpg7 adapting pieces for construction height 890 mm "Business Class" and "Economy Class" straight faceplate, 00 x 890 mm (wxh), NIROSTA (.40) brushed surface straight faceplate, 50 x 890 mm (wxh), NIROSTA (.40) brushed surface zctpw angle faceplate 90, 00 x 00 x 890 mm, NIROSTA (.40) brushed surface zctpg26 straight faceplate, with cut-out for control unit type 42, 60 x 890 mm (WxH), NIROSTA (.40) brushed surface zssema4 zssema6 manometer, mounted 0-6 bar, red line at bar, mounted 0-0 bar, red line at 7 bar, mounted 2 2 zctdiv4 zctdiv7 locking devices for fronts cylinder lock for wing door- and roll-out drawer front (sink substructures) cylinder lock for machine compartment door front (sink substructures) I/0

162 HAGOLA-neutral bar counters (HTT) First Class, construction height 790 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth non-refrigerated bar counter wing door DIN left httfn5076d7 httfh076d httfh076d2 httfh4076d5 httfh4076d6 httfh5076d7 httfh5076d8 httfh5576d httfh5576d4 httfh6076d httfh6076d2 non-refrigerated bar counters with wing doors, casing: plastic-coated decor plate 00/790, installation compartment, wing door DIN left, eff. height 660 mm 00/790, installation compartment, wing door DIN right, eff. height 660 mm 400/790, wing door DIN left with intermediate shelf, eff. height 660 mm 400/790, wing door DIN right with intermediate shelf, eff. height 660 mm 500/790, wing door DIN left with intermediate shelf, eff. height 660 mm 500/790, wing door DIN right with intermediate shelf, eff. height 660 mm 550/790, wing door DIN left with intermediate shelf, eff. height 660 mm 550/790, wing door DIN right with intermediate shelf, eff. height 660 mm 600/790, wing door DIN left with intermediate shelf, eff. height 660 mm 600/790, wing door DIN right with intermediate shelf, eff. height 660 mm non-refrigerated bar counter wing door DIN right httfn4076d6 non-refrigerated bar counter 2 roll-out drawers httfh4076a0 httfn076d httfn076d2 httfn4076d5 httfn4076d6 httfn5076d7 httfn5076d8 httfn5576d httfn5576d4 httfn6076d httfn6076d2 httfh4076a0 httfh4076a8 httfh4076a9 httfh5076a2 httfh5076a httfh5076a4 httfh5076a5 httfh5076a non-refrigerated bar counters with wing doors, casing: NIROSTA (.40) 00/790, installation compartment, wing door DIN left, eff. height 660 mm 00/790, installation compartment, wing door DIN right, eff. height 660 mm 400/790, wing door DIN left with intermediate shelf, eff. height 680 mm 400/790, wing door DIN right with intermediate shelf, eff. height 680 mm 500/790, wing door DIN left with intermediate shelf, eff. height 680 mm 500/790, wing door DIN right with intermediate shelf, eff. height 680 mm 550/790, wing door DIN left with intermediate shelf, eff. height 680 mm 550/790, wing door DIN right with intermediate shelf, eff. height 680 mm 600/790, wing door DIN left with intermediate shelf, eff. height 680 mm 600/790, wing door DIN right with intermediate shelf, eff. height 680 mm non-refrigerated bar counters with roll-out drawers, casing: plastic-coated decor plate 400/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 20 mm bottom 400/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 40 mm bottom 400/790, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 0 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 40 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 245 mm top, 60 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 0 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 20 mm bottom 500/790, roll-out drawers (one upon the other), eff. heights 95 mm top, 75 mm centre, 75 mm bottom I valid from July 20 non-refrigerated bar counter 2 roll-out drawers httfn5076a4 httfn4076a0 httfn4076a8 httfn4076a9 httfn5076a httfn5076a2 httfn5076a httfn5076a4 httfn5076a7 non-refrigerated bar counters with roll-out drawers, casing: NIROSTA (.40) 400/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 20 mm bottom 400/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 40 mm bottom 400/790, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 0 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 40 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 245 mm top, 60 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 0 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 20 mm bottom 500/790, roll-out drawers (one upon the other), eff. heights 95 mm top, 75 mm centre, 75 mm bottom Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/

163 HAGOLA-neutral bar counters (HTT) First Class, construction height 790 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth httfh4076a httfh4076a2 httfh5076a6 httfh5076a7 non-refrigerated bar counters with roll-out drawer and wing door, casing: plastic-coated decor plate 400/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN left, eff. height 405 mm 400/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN right, eff. height 405 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN left, eff. height 405 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN right, eff. height 405 mm top: roll-out drawer bottom: wing door DIN left httfh5076a6 httfn4076a httfn4076a2 httfn5076a5 httfn5076a6 non-refrigerated bar counters with roll-out drawer and wing door, casing: NIROSTA (.40) 400/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN left, eff. height 420 mm 400/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN right, eff. height 420 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN left, eff. height 420 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN right, eff. height 420 mm non-refrigerated bar counter roll-out drawer/wing door DIN left httfn4076a httfh4076p httfh4076p4 httfh4076a httfh5076p httfh5076p4 httfh5076a8 non-refrigerated bar counters with tilting waste bin and other components, casing: plastic-coated decor plate 400/790, tilting waste bin 5 l, in total casing height 400/790, top: tilt. waste bin 20 l, bottom: roll-out drawer, eff. height 20 mm 400/790, top: roll-out drawer, eff. height 95 mm, bottom: tilt. waste bin 20 l 500/790, tilting waste bin 46 l, in total casing height 500/790, top: tilt. waste bin 26 l, bottom: roll-out drawer, eff. height 20 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: tilt. waste bin, 26 l I top: roll-out drawer bottom: tiliting waste bin httfn4076a httfn4076p httfn4076p4 httfn4076a httfn5076p httfn5076p4 httfn5076a8 non-refrigerated bar counters with tilting waste bin and other components, casing: NIROSTA (.40) 400/790, tilting waste bin 5 l, in total casing height 400/790, top: tilt. waste bin 20 l, bottom: roll-out drawer, eff. height 20 mm 400/790, top: roll-out drawer, eff. height 95 mm, bottom: tilt. waste bin 20 l 500/790, tilting waste bin 46 l, in total casing height 500/790, top: tilt. waste bin 26 l, bottom: roll-out drawer, eff. height 20 mm 500/790, top: roll-out drawer, eff. h. 95 mm, bottom: tilt. waste bin 26 l cutlery drawer/drawer (top) wing door DIN right (bottom) httfh4076b9 I/2 httfh4076b0 httfh4076b7 httfh4076b8 httfh4076b9 httfh5076b2 httfh5076b httfh5076b4 httfh5076b5 non-refrigerated bar counters with drawer for cutlery and drawers, casing: plastic-coated decor plate 400/790, top: drawer with cutlery tray, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 250 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 250 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 250 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 250 mm 500/790, top: cutlery drawer with cutlery tray, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. valid from July 20

164 HAGOLA-neutral bar counters (HTT) First Class, construction height 790 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth cutlery drawer/drawer (top) roll-out drawer (bottom) httfn5076b2 httfn4076b0 httfn4076b7 httfn4076b8 httfn4076b9 httfn5076b2 httfn5076b httfn5076b4 httfn5076b5 non-refrigerated bar counters with drawer for cutlery and drawers, casing: NIROSTA (.40) 400/790, top: drawer with cutlery tray, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 270 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 270 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 270 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 270 mm 500/790, top: drawer with cutlery tray, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm Euro httfh4076b6 httfh5076b non-refrigerated bar counters with drawers, casing: plastic-coated decor plate 400/790, drawers (one upon the other), eff. heights: 65 mm (top), 80 mm (centre) and 25 mm (bottom) 500/790, drawers (one upon the other), eff. heights: 65 mm (top), 80 mm (centre) and 25 mm (bottom) non-refrigerated bar counter drawers httfh4076b6 httfn4076b6 httfn5076b non-refrigerated bar counters with drawers, casing: NIROSTA (.40) 400/790, drawers (one upon the other), eff. heights: 65 mm (top), 80 mm (centre), 25 mm (bottom) 500/790, drawers (one upon the other), eff. heights: 65 mm (top), 80 mm (centre), 25 mm (bottom) non-refrigerated bar counter cash register drawer httfh5076g httfh4076g httfh4076g2 httfh4076g httfh4076g4 httfh5076g httfh5076g2 httfh5076g httfh5076g4 non-refrigerated bar counters w. cash register drawer and other components, casing: plastic-coated decor plate 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 250 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 250 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 250 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 250 mm I valid from July 20 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/

165 HAGOLA-neutral bar counters (HTT) First Class, construction height 790 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth cash register drawer (top)/drawer (centre) roll-out drawer (bottom) httfn4076g httfn4076g httfn4076g2 httfn4076g httfn4076g4 httfn5076g httfn5076g2 httfn5076g httfn5076g4 non-refrigerated bar counters w. cash register drawer and other components, casing: NIROSTA (.40) 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 270 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 270 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 270 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 270 mm I top: electric cash register bottom: waste bin drawer httfh4076k httfh4076k0 httfh4076k httfh4076k2 httfh4076k httfh4076k9 httfh5076k httfh5076k2 httfh5076k httfh5076k4 httfh5076k5 non-refrigerated bar counters with electric cash register drawer for cash register systems and further components, casing: plastic-coated decor plate 400/790, top: electric cash register drawer, bottom: tilting waste bin 20 l 400/790, top: electric cash register drawer, bottom: waste bin drawer 2 x 6,5 l 400/790, top: el. cash register drawer, bottom: wing door DIN right, eff. height 400 mm 400/790, top: el. cash register drawer, bottom: wing door DIN left, eff. height 400 mm 400/790, top: electric cash register drawer, bottom: roll-out drawer, eff. height 40 mm 500/790, top: electric cash register drawer, bottom: roll-out drawer, eff. height 40 mm 500/790, top: electric cash register drawer, bottom: tilting waste bin 26 l 500/790, top: electric cash register drawer, bottom: waste bin drawer 2 x 22 l 500/790, top: el. cash register drawer, bottom: wing door DIN right, eff. height 400 mm 500/790, top: el. cash register drawer, bottom: wing door DIN left, eff. height 400 mm top: electric cash reg. drawer bottom: wing door DIN right httfh5076k4 electric cash register drawer (top) tilting waste bin (bottom) httfn5076k2 httfn4076k0 httfn4076k httfn4076k2 httfn4076k httfn4076k9 httfn5076k httfn5076k2 httfn5076k httfn5076k4 httfn5076k5 non-refrigerated bar counters with electric cash register drawer for cash register systems and further components, casing: NIROSTA (.40) 400/790, top: electric cash register drawer, bottom: tilting waste bin 20 l 400/790, top: electric cash register drawer, bottom: waste bin drawer, 2 x 6,5 l 400/790, top: el. cash register drawer, bottom: wing door DIN right, eff. height 420 mm 400/790, top: el. cash register drawer, bottom: wing door DIN left, eff. height 420 mm 400/790, top: el. cash register drawer, bottom: roll-out drawer, eff. height 40 mm 500/790, top: el. cash register drawer, bottom: roll-out drawer, eff. height 40 mm 500/790, top: electric cash register drawer, bottom: tilting waste bin 26 l 500/790, top: electric cash register drawer, bottom: waste bin drawer 2 x 22 l 500/790, top: el. cash register drawer, bottom: wing door DIN right, eff. height 420 mm 500/790, top: el. cash register drawer, bottom: wing door DIN left, eff. height 420 mm Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. valid from July 20 I/4

166 HAGOLA-neutral bar counters (HTT) First Class, construction height 790 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth drawer for coffee grounds (top) tilting waste bin (bottom) httfn4076s6 httfh4076s5 httfh4076s6 httfh4076s7 httfh4076s8 httfh4076s9 httfh5076s httfh5076s2 httfh5076s httfh5076s4 httfh5076s5 non-refrigerated bar counters with drawer for coffee grounds and further components, casing: plastic-coated decor plate 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 20 l 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 6,5 l 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 400 mm 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 400 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 26 l 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 22 l 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 400 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 400 mm drawer for coffee grounds (top) wing door DIN left (bottom) httfn4076s9 top: drawer f. coffee grounds bottom: roll-out drawer httfn4076s5 httfn4076s5 httfn4076s6 httfn4076s7 httfn4076s8 httfn4076s9 httfn5076s httfn5076s2 httfn5076s httfn5076s4 httfn5076s5 non-refrigerated bar counters with drawer for coffee grounds and further components, casing: NIROSTA (.40) 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 20 l 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 6,5 l 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 420 mm 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 420 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 26 l 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 22 l 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 420 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 420 mm I waste bin drawer incl. storage compartment (top) httfh5076z httfh4076z httfh4076z2 httfh5076z httfh5076z2 non-refrigerated bar counters with waste bin drawer and further components, casing: plastic-coated decor plate 400/790, waste bin drawer 2 x 6,5 l incl. storage compartment (top), eff. height 225 mm 400/790, top: roll-out drawer, eff. height 95 mm, bottom: waste bin drawer 2 x 6,5 l 500/790, waste bin drawer 2 x 22 l incl. storage compartment (top), eff. height 225 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: waste bin drawer 2 x 22 l valid from July 20 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/5

167 HAGOLA-neutral bar counters (HTT) First Class, construction height 790 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth waste bin drawer incl. storage comp. httfn4076z httfn4076z httfn4076z2 httfn5076z httfn5076z2 httoh httoh httoh httoh non-refrigerated bar counters with waste bin drawer and further components, casing: NIROSTA (.40) 400/790, waste bin drawer 2 x 6,5 l incl. storage compartment (top), eff. height 225 mm 400/790, top: roll-out drawer, eff. height 95 mm, bottom: waste bin drawer 2 x 6,5 l 500/790, waste bin drawer 2 x 22 l incl. storage compartment (top), eff. height 225 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: waste bin drawer 2 x 22 l open modules, casing: plastic-coated decor plate 400/790, open module with intermediate shelf, eff. height 660 mm 500/790, open module with intermediate shelf, eff. height 660 mm 550/790, open module with intermediate shelf, eff. height 660 mm 600/790, open module with intermediate shelf, eff. height 660 mm httbn httbn40760 httbn httbn httbn50760 httbn httbn httbn httbn open modules, casing: NIROSTA (.40) 400/790, open module with intermediate shelf, eff. height 680 mm 400/790, open module for Gastronorm-bowls, eff. height 680 mm 500/790, open module with intermediate shelf, eff. height 680 mm 500/790, open module with drawer casings without front, eff. heights x 220 mm 500/790, open module, intended for dish washer baskets, eff. height 680 mm 550/790, open module with intermediate shelf, eff. height 680 mm 600/790, open module with drawer casings without front, eff. heights x 220 mm 600/790, open module with intermediate shelf, eff. height 680 mm 600/790, open module, intended for dish washer baskets, eff. height 680 mm I high capacity waste bin self-extinguishing httfn4576g7 httfn4576g6 httfn4576g7 high capacity waste bin, casing: NIROSTA (.40), (self-extinguishing) 450/790, with wing door DIN left (bottom) 450/790, with wing door DIN right (bottom) Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. I/6 valid from July 20

168 HAGOLA-neutral bar counters (HTT) First Class, construction height 890 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth non-refrigerated bar counter wing door DIN left httfn5086d7 httfh086d httfh086d2 httfh4086d5 httfh4086d6 httfh5086d7 httfh5086d8 httfh5586d httfh5586d4 httfh6086d httfh6086d2 non-refrigerated bar counters with wing doors, casing: plastic-coated decor plate 00/890, installation compartment, wing door DIN left, eff. height 760 mm 00/890, installation compartment, wing door DIN right, eff. height 760 mm 400/890, wing door DIN left with intermediate shelf, eff. height 760 mm 400/890, wing door DIN right with intermediate shelf, eff. height 760 mm 500/890, wing door DIN left with intermediate shelf, eff. height 760 mm 500/890, wing door DIN right with intermediate shelf, eff. height 760 mm 550/890, wing door DIN left with intermediate shelf, eff. height 760 mm 550/890, wing door DIN right with intermediate shelf, eff. height 760 mm 600/890, wing door DIN left with intermediate shelf, eff. height 760 mm 600/890, wing door DIN right with intermediate shelf, eff. height 760 mm neutral bar counter wing door DIN right httfn4086d6 httfn086d httfn086d2 httfn4086d5 httfn4086d6 httfn5086d7 httfn5086d8 httfn5586d httfn5586d4 httfn6086d httfn6086d2 non-refrigerated bar counters with wing doors, casing: NIROSTA (.40) 00/890, installation compartment, wing door DIN left, eff. height 660 mm 00/890, installation compartment, wing door DIN right, eff. height 660 mm 400/890, wing door DIN left with intermediate shelf, eff. height 780 mm 400/890, wing door DIN right with intermediate shelf, eff. height 780 mm 500/890, wing door DIN left with intermediate shelf, eff. height 780 mm 500/890, wing door DIN right with intermediate shelf, eff. height 780 mm 550/890, wing door DIN left with intermediate shelf, eff. height 780 mm 550/890, wing door DIN right with intermediate shelf, eff. height 780 mm 600/890, wing door DIN left with intermediate shelf, eff. height 780 mm 600/890, wing door DIN right with intermediate shelf, eff. height 780 mm non-refrigerated bar counter 2 roll-out drawers (one upon the other) httfh5086a2 httfh4086a0 httfh4086a8 httfh4086a9 httfh5086a2 httfh5086a httfh5086a4 httfh5086a0 httfh5086a non-refrigerated bar counters with roll-out drawers, casing: plastic-coated decor plate 400/890, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 0 mm bottom 400/890, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 40 mm bottom 400/890, 2 roll-out drawers (one upon the other), eff. heights 45 mm top, 60 mm bottom 500/890, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 40 mm bottom 500/890, 2 roll-out drawers (one upon the other), eff. heights 45 mm top, 60 mm bottom 500/890, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 0 mm bottom 500/890, roll-out drawers (one upon the other), eff. heights: 60 mm (top), 75 mm (centre), 0 mm (bottom) 500/890, roll-out drawers (one upon the other), eff. heights: 295 mm (top), 75 mm (centre), 75 mm (bottom) I valid from July 20 neutral bar counter 2 roll-out drawers (stacked) httfn4086a8 non-refrigerated bar counters with roll-out drawers, casing: NIROSTA (.40) httfn4086a0 400/890, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 0 mm bottom httfn4086a8 400/890, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 40 mm bottom httfn4086a9 400/890, 2 roll-out drawers (one upon the other), eff. heights 45 mm top, 60 mm bottom httfn5086a2 500/890, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 40 mm bottom httfn5086a 500/890, 2 roll-out drawers (one upon the other), eff. heights 45 mm top, 60 mm bottom httfn5086a4 500/890, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 0 mm bottom httfn5086a0 500/890, roll-out drawers (one upon the other), eff. heights 60 mm (top), 75 mm (centre), 0 mm (bottom) httfn5086a 500/890, roll-out drawers (one upon the other), eff. heights 295 mm (top), 75 mm (centre), 75 mm (bottom) Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/7

169 HAGOLA-neutral bar counters (HTT) First Class, construction height 890 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth roll-out drawer (top) wing door DIN left (bottom) httfh5086a5 httfh4086a httfh4086a2 httfh5086a5 httfh5086a6 httfn4086a httfn4086a2 httfn5086a5 httfn5086a6 non-refrigerated bar counters with roll-out drawer and wing door, casing: plastic-coated decor plate 400/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN left, eff. height 405 mm 400/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN right, eff. height 405 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN left, eff. height 405 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN right, eff. height 405 mm non-refrigerated bar counters with roll-out drawer and wing door, casing: NIROSTA (.40) 400/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN left, eff. height 420 mm 400/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN right, eff. height 420 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN left, eff. height 420 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN right, eff. height 420 mm top: roll-out drawer bottom: wing door DIN right httfn4086a2 httfh4086p httfh4086p4 httfh4086a httfh5086p httfh5086p4 httfh5086a7 non-refrigerated bar counters with tilting waste bin and other components, casing: plastic-coated decor plate 400/890, tilting waste bin 5 l, in total casing height 400/890, tilting waste bin 20 l, bottom: roll-out drawer, eff. height 0 mm 400/890, top: roll-out drawer, eff. height 295 mm, bottom: tilt. waste bin 20 l 500/890, tilting waste bin 46 l, in total casing height 500/890, tilting waste bin 26 l, bottom: roll-out drawer, eff. height 0 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: tilt. waste bin 26 l I top: roll-out drawer bottom: tiltg. waste bin httfn4086a httfn4086p httfn4086p4 httfn4086a httfn5086p httfn5086p4 httfn5086a7 non-refrigerated bar counters with tilting waste bin and other components, casing: NIROSTA (.40) 400/890, tilting waste bin 5 l, in total casing height 400/890, tilting waste bin 20 l, bottom: roll-out drawer, eff. height 0 mm 400/890, top: roll-out drawer, eff. height 295 mm, bottom: tilt. waste bin 20 l 500/890, tilting waste bin 46 l, in total casing height 500/890, tilting waste bin 26 l, bottom: roll-out drawer, eff. height 0 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: tilt. waste bin 26 l Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. I/8 valid from July 20

170 HAGOLA-neutral bar counters (HTT) First Class, construction height 890 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth cutlery drawer/drawer (top) wing door DIN left (bottom) httfh4086b8 httfh4086b0 httfh4086b7 httfh4086b8 httfh4086b9 httfh5086b2 httfh5086b httfh5086b4 httfh5086b5 non-refrigerated bar counters with drawer for cutlery and drawers, casing: plastic-coated decor plate 400/890, top: drawer with cutlery tray, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 50 mm 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing dor DIN right, eff. height 50 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: drawer, eff. height 60 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 50 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 50 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each cutlery drawer/drawer (top) roll-out drawer (bottom) httfh5086b2 httfn4086b0 httfn4086b7 httfn4086b8 httfn4086b9 httfn5086b2 httfn5086b httfn5086b4 httfn5086b5 non-refrigerated bar counters with drawer for cutlery and drawers, casing: NIROSTA (.40) 400/890, top: drawer with cutlery tray, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 70 mm 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 70 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 70 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 70 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each top: cutlery drawer/centre: drawerg bottom: wing door DIN left httfn4086b8 httfh4086b6 httfh5086b non-refrigerated bar counters with 4 drawers, casing: plastic-coated decor plate 400/890, 4 drawers (one upon the other), eff. heights: 40 mm (top), 55 mm each (centre) and 55 mm (bottom) 500/890, 4 drawers (one upon the other), eff. heights: 40 mm (top), 55 mm each (centre) and 55 mm (bottom) I non-refrigerated bar counter 4 drawers httfn4086b6 httfn4086b6 httfn5086b non-refrigerated bar counters with 4 drawers, casing: NIROSTA (.40) 400/890, 4 drawers (one upon the other), eff. heights: 40 mm (top), 55 mm each (centre) and 55 mm (bottom) 500/890, 4 drawers (one upon the other), eff. heights: 40 mm (top), 55 mm each (centre) and 55 mm (bottom) valid from July 20 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/9

171 HAGOLA-neutral bar counters (HTT) First Class, construction height 890 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth cash register drawer/drawer (top) roll-out drawer (bottom) httfn4086g httfh4086g httfh4086g2 httfh4086g httfh4086g4 httfh5086g httfh5086g2 httfh5086g httfh5086g4 non-refrigerated bar counters with cash register drawer and other components, casing: plastic-coated decor plate 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 50 mm 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 50 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 50 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 50 mm top: cash reg. drawer/ centre: drawerg bottom: wing door DIN left httfh4086g httfn4086g httfn4086g2 httfn4086g httfn4086g4 httfn5086g httfn5086g2 httfn5086g httfn5086g4 non-refrigerated bar counters w. cash register drawer and other components, casing: NIROSTA (.40) 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 70 mm 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 70 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 70 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 70 mm I top: cash reg. drawer bottom: drawer httfn5086g2 electric cash register drawer (top)/drawer roll-out drawer (bottom) httfh5086k httfh4086k0 httfh4086k httfh4086k2 httfh4086k httfh4086k9 httfh5086k httfh5086k2 httfh5086k httfh5086k4 httfh5086k5 non-refrigerated bar counters with electric cash register drawer for cash register systems and further components, casing: plastic-coated decor plate 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: tilting waste bin 20 l 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: waste bin drawer 2 x 6,5 l 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN right, eff. height 400 mm 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN left, eff. height 400 mm 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: roll-out drawer, eff. height 40 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: roll-out drawer, eff. height 40 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: tilting waste bin 26 l 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: waste bin drawer 2 x 22 l 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN right, eff. height 400 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN left, eff. height 400 mm Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. valid from July 20 I/20

172 HAGOLA-neutral bar counters (HTT) First Class, construction height 890 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth electric cash register drawer/ drawer (top) roll-out drawer (bottom) httfn5086k httfn4086k0 httfn4086k httfn4086k2 httfn4086k httfn4086k9 httfn5086k httfn5086k2 httfn5086k httfn5086k4 httfn5086k5 non-refrigerated bar counters with electric cash register drawer for cash register systems and further components, casing: NIROSTA (.40) 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: tilting waste bin 20 l 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: waste bin drawer 2 x 6,5 l 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN right, eff. height 420 mm 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN left, eff. height 420 mm 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: roll-out drawer, eff. height 40 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: roll-out drawer, eff. height 40 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: tilting waste bin 26 l 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: waste bin drawer 2 x 22 l 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN right, eff. height 420 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN left, eff. height 420 mm top: electric cash reg. drawer centre: drawer bottom: waste bin drawer httfn5086k drawer for coffee grounds (top) tilting waste bin (bottom) httfn4086s httfh4086s0 httfh4086s httfh4086s2 httfh4086s httfh4086s4 httfh5086s httfh5086s2 httfh5086s httfh5086s4 httfh5086s5 non-refrigerated bar counters with drawer for coffee grounds and further components, casing: plastic-coated decor plate 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 20 l 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 6,5 l 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 400 mm 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 400 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 26 l 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 22 l 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 400 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 400 mm I valid from July 20 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/2

173 HAGOLA-neutral bar counters (HTT) First Class, construction height 890 mm fronts: NIROSTA (.40) linen-optic surface, casing: 9 mm plastic-coated decor plate V00, with surrounding 2 mm thick softline-edge or NIROSTA (.40) brushed surface, 600 mm depth drawer for coffee grounds (top) tilting waste bin (bottom) httfn4086s httfn4086s0 httfn4086s httfn4086s2 httfn4086s httfn4086s4 httfn5086s httfn5086s2 httfn5086s httfn5086s4 httfn5086s5 non-refrigerated bar counters with drawer for coffee grounds and further components, casing: NIROSTA (.40) 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 20 l 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 6,5 l 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 420 mm 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 420 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 26 l 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 22 l 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 420 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 420 mm waste bin drawer incl. storage compartment (top) httfh5086z httfh4086z httfh4086z2 httfh5086z httfh5086z2 httfn4086z httfn4086z2 httfn5086z httfn5086z2 non-refrigerated bar counters with waste bin drawer and further components, casing: plastic-coated decor plate 400/890, waste bin drawer 2 x 6,5 l incl. storage comp. (top), eff. h. 25 mm 400/890, top: roll-out drawer, eff. h. 295 mm, bottom: waste bin drawer 2 x 6,5 l 500/890, waste bin drawer 2 x 22 l incl. storage comp. (top), eff. h. 25 mm 500/890, top: roll-out drawer, eff. h. 295 mm, bottom: waste bin drawer 2 x 22 l non-refrigerated bar counters with waste bin drawer and further components, casing: NIROSTA (.40) 400/890, waste bin drawer 2 x 6,5 l incl. storage comp. (top), eff. h. 25 mm 400/890, top: roll-out drawer, eff. h. 295 mm, bottom: waste bin drawer 2 x 6,5 l 500/890, waste bin drawer 2 x 22 l incl. storage comp. (top), eff. h. 25 mm 500/890, top: roll-out drawer, eff. h. 295 mm, bottom: waste bin drawer 2 x 22 l I httoh httoh httoh httoh open modules, casing: plastic-coated decor plate 400/890, open module with intermediate shelf, eff. height 760 mm 500/890, open module with intermediate shelf, eff. height 760 mm 550/890, open module with intermediate shelf, eff. height 760 mm 600/890, open module with intermediate shelf, eff. height 760 mm high capacity waste bin self-extinguishing httfn4586g7 httbn httbn40860 httbn httbn httbn httbn httbn httbn httbn httbn open modules, casing: NIROSTA (.40) 400/890, open module with intermediate shelf, eff. height 780 mm 400/890, open module, eff. height 780 mm, for Gastronorm-bowls 400/890, open module with drawer casings without front, eff. h. x 255 mm 500/890, open module with intermediate shelf, eff. heights 780 mm 500/890, open module with drawer casings without front, eff. h. x 255 mm 500/890, open module, intended for dish washer baskets, eff. height 780 mm 550/890, open module with intermediate shelf, eff. height 780 mm 600/890, open module with drawer casings without front, eff. h. x 255 mm 600/890, open module with intermediate shelf, eff. height 780 mm 600/890, open module, intended for dish washer baskets, eff. height 780 mm I/22 httfn4586g6 httfn4586g7 high capacity waste bin, casing: NIROSTA (.40), (self-extinguishing) 450/890, with wing door DIN left (bottom) 450/890, with wing door DIN right (bottom) Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/2. valid from July 20

174 HAGOLA-neutral bar counters (HTT) accessory for neutral bar counters "First Class" base rail 20 x 20 mm zctso base rail 0 x 40 mm zctso base rails/compact base zctso pair of base rails 20 x 20 mm, aluminium, mounted per running metre zctso pair of base rails 0 x 40 mm, aluminium, mounted per running metre zctso8 pair of base rails 60 x 50 mm, aluminium, mounted per running metre zctso4 compact base, blind panel Tacon black, 00 mm high, with adjustable legs from 85 to 50 mm height, per running metre zctso6 compact base, blind panel covered with NIROSTA (.40) linen-optic surface, 00 mm high, with adjustable legs from 85 to 50 mm height, per running metre zctso5 compact base, blind panel covered with NIROSTA (.40) brushed surface, 00 mm high, with adjustable legs from 85 to 50 mm height, per running metre zctso7 compact base, blind panel covered with aluminium (stainless steel optics), 00 mm high, with adjustable legs from 85 to 50 mm height, per running metre compact base 00 mm high zctso6 adapting pieces for construction height 790 mm zctpg0 straight faceplate, 00 x 790 mm (wxh), NIROSTA (.40) linen-optic surface zctpg straight faceplate, 50 x 790 mm (wxh), NIROSTA (.40) linen-optic surface zctpg27 straight faceplate, with cut-out for control unit type 42, 60 x 790 mm (WxH), NIROSTA (.40) linen-optic surface adapting pieces for construction height 890 mm zctpg4 straight faceplate, 00 x 890 mm (wxh), NIROSTA (.40) linen-optic surface zctpw2 angle fitting panel 90, 00 x 00 x 890 mm, NIROSTA (.40) linenoptic surface zctpg28 straight faceplate, with cut-out for control unit type 42, 60 x 890 mm (WxH), NIROSTA (.40) linen-optic surface straight faceplate with cut-out for control unit type 42 zctpg27 zctdiv5 zctdiv6 locking devices for fronts cylinder lock for wing door- and roll-out drawer front (neutral bar counter) cylinder lock for drawer front (neutral bar counter) I valid from July 20 Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/2

175 HAGOLA-neutral bar counters (HTT) Business Class, construction height 790 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth non-refrigerated bar counter wing door DIN right httbh5076d8 httbh076d httbh076d2 httbh4076d5 httbh4076d6 httbh5076d7 httbh5076d8 httbh5576d httbh5576d4 httbh6076d httbh6076d2 non-refrigerated bar counters with wing doors, casing: plastic-coated decor plate 00/790, installation compartment, wing door DIN left, eff. height 660 mm 00/790, installation compartment, wing door DIN right, eff. height 660 mm 400/790, wing door DIN left with intermediate shelf, eff. height 660 mm 400/790, wing door DIN right with intermediate shelf, eff. height 660 mm 500/790, wing door DIN left with intermediate shelf, eff. height 660 mm 500/790, wing door DIN right with intermediate shelf, eff. height 660 mm 550/790, wing door DIN left with intermediate shelf, eff. height 660 mm 550/790, wing door DIN right with intermediate shelf, eff. height 660 mm 600/790, wing door DIN left with intermediate shelf, eff. height 660 mm 600/790, wing door DIN right with intermediate shelf, eff. height 660 mm non-refrigerated bar counter wing door DIN left httbn5076d7 httbn076d httbn076d2 httbn4076d5 httbn4076d6 httbn5076d7 httbn5076d8 httbn5576d httbn5576d4 httbn6076d httbn6076d2 non-refrigerated bar counters with wing doors, casing: NIROSTA (.40) 00/790, installation compartment, wing door DIN left, eff. height 660 mm 00/790, installation compartment, wing door DIN right, eff. height 660 mm 400/790, wing door DIN left with intermediate shelf, eff. height 680 mm 400/790, wing door DIN right with intermediate shelf, eff. height 680 mm 500/790, wing door DIN left with intermediate shelf, eff. height 680 mm 500/790, wing door DIN right with intermediate shelf, eff. height 680 mm 550/790, wing door DIN left with intermediate shelf, eff. height 680 mm 550/790, wing door DIN right with intermediate shelf, eff. height 680 mm 600/790, wing door DIN left with intermediate shelf, eff. height 680 mm 600/790, wing door DIN right with intermediate shelf, eff. height 680 mm I non-refrigerated bar counter 2 roll-out drawers (stacked) httbh4076a0 httbh4076a0 httbh4076a8 httbh4076a9 httbh5076a httbh5076a2 httbh5076a httbh5076a4 httbh5076a7 non-refrigerated bar counters with roll-out drawers, casing: plastic-coated decor plate 400/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 20 mm bottom 400/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 40 mm bottom 400/790, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 0 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 40 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 245 mm top, 60 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 0 mm bottom 500/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 20 mm bottom 500/790, roll-out drawers (one upon the other), eff. heights 95 mm (top), 75 mm (centre), 75 mm (bottom) non-refrigerated bar counter 2 roll-out drawers httbn5076a4 I/24 non-refrigerated bar counters with roll-out drawers, casing: NIROSTA (.40) httbn4076a0 400/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 20 mm bottom httbn4076a8 400/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 40 mm bottom httbn4076a9 400/790, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 0 mm bottom httbn5076a 500/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 40 mm bottom httbn5076a2 500/790, 2 roll-out drawers (one upon the other), eff. heights 245 mm top, 60 mm bottom httbn5076a 500/790, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 0 mm bottom httbn5076a4 500/790, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 20 mm bottom httbn5076a7 500/790, roll-out drawers (one upon the other), eff. heights 95 mm (top), 75 mm (centre), 75 mm (bottom) Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. valid from July 20

176 HAGOLA-neutral bar counters (HTT) Business Class, construction height 790 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth roll-out drawer (top) wing door DIN left (bottom) httbh5076a5 httbh4076a httbh4076a2 httbh5076a5 httbh5076a6 non-refrigerated bar counters with roll-out drawer and wing door, casing: plastic-coated decor plate 400/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN left, eff. height 405 mm 400/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN right, eff. height 405 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN left, eff. height 405 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN right, eff. height 405 mm httbn4076a httbn4076a2 httbn5076a5 httbn5076a6 non-refrigerated bar counters with roll-out drawer and wing door, casing: NIROSTA (.40) 400/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN left, eff. height 420 mm 400/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN right, eff. height 420 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN left, eff. height 420 mm 500/790, top: roll-out drawer, eff. height 95 mm, bottom: wing door DIN right, eff. height 420 mm top: roll-out drawer bottom: wing door DIN left httbn4076a httbh4076p httbh4076p4 httbh4076a httbh5076p httbh5076p4 httbh5076a8 non-refrigerated bar counters with tilting waste bin and other components, casing: plastic-coated decor plate 400/790, tilting waste bin 5 l, in total casing height 400/790, top: tilt. waste bin 20 l, bottom: roll-out drawer, eff. height 20 mm 400/790, top: roll-out drawer, eff. height 95 mm, bottom: tilt. waste bin 20 l 500/790, tilting waste bin 46 l, in total casing height 500/790, top: tilt. waste bin 26 l, bottom: roll-out drawer, eff. height 20 mm 500/790, top: roll-out drawer, eff. h. 95 mm, bottom: tilt. waste bin 26 l non-refrigerated bar counter tiltg. waste bin httbn5076p httbn4076p httbn4076p4 httbn4076a httbn5076p httbn5076p4 httbn5076a8 non-refrigerated bar counters with tilting waste bin and other components, casing: NIROSTA (.40) 400/790, tilting waste bin 5 l, in total casing height 400/790, top: tilt. waste bin 20 l, bottom: roll-out drawer, eff. h. 20 mm 400/790, top: roll-out drawer, eff. h. 95 mm, bottom: tilt. waste bin 20 l 500/790, tilting waste bin 46 l, in total casing height 500/790, top: tilt. waste bin 26 l, bottom: roll-out drawer, eff. h. 20 mm 500/790, top: roll-out drawer, eff. h. 95 mm, bottom: tilt. waste bin 26 l I valid from July 20 top: cutlery drawer/drawer bottom: roll-out drawer httbh5076b2 httbh4076b0 httbh4076b7 httbh4076b8 httbh4076b9 httbh5076b2 httbh5076b httbh5076b4 httbh5076b5 non-refrigerated bar counters with drawer for cutlery and drawers, casing: plastic-coated decor plate 400/790, top: drawer with cutlery tray, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 250 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm bottom: wing door DIN right, eff. height 250 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 250 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 250 mm 500/790, top: drawer with cutlery tray, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/25

177 HAGOLA-neutral bar counters (HTT) Business Class, construction height 790 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth cutlery drawer/drawer (top) roll-out drawer (bottom) httbn5076b2 httbn4076b0 httbn4076b7 httbn4076b8 httbn4076b9 httbn5076b2 httbn5076b httbn5076b4 httbn5076b5 non-refrigerated bar counters with drawer for cutlery and drawers, casing: NIROSTA (.40) 400/790, top: cutlery drawer with cutlery tray, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 270 mm 400/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 270 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 270 mm 500/790, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 270 mm 500/790, top: drawer with cutlery tray, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm non-refrigerated bar counter drawers httbh4076b6 httbh4076b6 httbh5076b non-refrigerated bar counters with drawers, casing: plastic-coated decor plate 400/790, drawers (one upon the other), eff. heights: 65 mm (top), 80 mm (centre), 25 mm (bottom) 500/790, drawers (one upon the other), eff. heights: 65 mm (top), 80 mm (centre), 25 mm (bottom) httbn4076b6 httbn5076b non-refrigerated bar counters with drawers, casing: NIROSTA (.40) 400/790, drawers (one upon the other), eff. heights: 65 mm (top), 80 mm (centre), 25 mm (bottom) 500/790, drawers (one upon the other), eff. heights: 65 mm (top), 80 mm (centre), 25 mm (bottom) I non-refrigerated bar counter drawers httbn5076b non-refrigerated bar counter cash register drawer httbh5076g httbh4076g httbh4076g2 httbh4076g httbh4076g4 httbh5076g httbh5076g2 httbh5076g httbh5076g4 non-refrigerated bar counters w. cash register drawer and other components, casing: plastic-coated decor plate 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 250 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 250 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 250 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 250 mm Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. I/26 valid from July 20

178 HAGOLA-neutral bar counters (HTT) Business Class, construction height 790 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth cash register drawer (top) / drawer (centre) roll-out drawer (bottom) httbn4076g httbn4076g httbn4076g2 httbn4076g httbn4076g4 httbn5076g httbn5076g2 httbn5076g httbn5076g4 non-refrigerated bar counters w. cash register drawer and other components, casing: NIROSTA (.40) 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 270 mm 400/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 270 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 260 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 65 mm, centre: drawer, eff. height 80 mm, bottom: drawer, eff. height 25 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 270 mm 500/790, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 270 mm valid from July 20 top: electr. cash reg. drawer bottom: waste bin drawer httbh4076k top: electric cash reg. drawer bottom: wing door DIN right httbh5076k4 top: electric cash reg. drawer bottom: roll-out drawer httbn4076k9 httbh4076k0 httbh4076k httbh4076k2 httbh4076k httbh4076k9 httbh5076k httbh5076k2 httbh5076k httbh5076k4 httbh5076k5 httbn4076k0 httbn4076k httbn4076k2 httbn4076k httbn4076k9 httbn5076k httbn5076k2 httbn5076k httbn5076k4 httbn5076k5 non-refrigerated bar counters with electric cash register drawer for cash register systems and further components, casing: plastic-coated decor plate 400/790, top: electric cash register drawer, bottom: tilting waste bin 20 l 400/790, top: electric cash register drawer, bottom: waste bin drawer 2 x 6,5 l 400/790, top: el. cash register drawer, bottom: wing door DIN right, eff. height 400 mm 400/790, top: el. cash register drawer, bottom: wing door DIN left, eff. height 400 mm 400/790, top: electric cash register drawer, bottom: roll-out drawer, eff. height 40 mm 500/790, top: electric cash register drawer, bottom: roll-out drawer, eff. height 40 mm 500/790, top: electric cash register drawer, bottom: tilting waste bin 26 l 500/790, top: electric cash register drawer, bottom: waste bin drawer 2 x 22 l 500/790, top: el. cash register drawer, bottom: wing door DIN right, eff. height 400 mm 500/790, top: el. cash register drawer, bottom: wing door DIN left, eff. height 400 mm non-refrigerated bar counters with electric cash register drawer for cash register systems and further components, casing: NIROSTA (.40) 400/790, top: electric cash register drawer, bottom: tilting waste bin 20 l 400/790, top: electric cash register drawer, bottom: waste bin drawer 2 x 6,5 l 400/790, top: el. cash register drawer, bottom: wing door DIN right, eff. height 420 mm 400/790, top: el. cash register drawer, bottom: wing door DIN left, eff. height 420 mm 400/790, top: electric cash register drawer, bottom: roll-out drawer, eff. height 40 mm 500/790, top: electric cash register drawer, bottom: roll-out drawer, eff. height 40 mm 500/790, top: electric cash register drawer, bottom: tilting waste bin 26 l 500/790, top: electric cash register drawer, bottom: waste bin drawer 2 x 22 l 500/790, top: el. cash register drawer, bottom: wing door DIN right, eff. height 420 mm 500/790, top: el. cash register drawer, bottom: wing door DIN left, eff. height 420 mm Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/27 I

179 HAGOLA-neutral bar counters (HTT) Business Class, construction height 790 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth top: drawer f. coffee grounds with GN-bowl bottom: roll-out drawer httbh5076s httbh4076s5 httbh4076s6 httbh4076s7 httbh4076s8 httbh4076s9 httbh5076s httbh5076s2 httbh5076s httbh5076s4 httbh5076s5 non-refrigerated bar counters with drawer for coffee grounds and further components, casing: plastic-coated decor plate 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 20 l 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 6,5 l 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 400 mm 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 400 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 26 l 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 22 l 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 400 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 400 mm I drawer for coffee grounds (top) tilting waste bin (bottom) httbn4076s6 drawer for coffee grounds (top) wing door DIN left (bottom) httbn4076s9 httbn4076s5 httbn4076s6 httbn4076s7 httbn4076s8 httbn4076s9 httbn5076s httbn5076s2 httbn5076s httbn5076s4 httbn5076s5 non-refrigerated bar counters with drawer for coffee grounds and further components, casing: NIROSTA (.40) 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 20 l 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 6,5 l 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 420 mm 400/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 420 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 26 l 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 22 l 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 420 mm 500/790, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 420 mm httbh4076z httbh4076z2 httbh5076z httbh5076z2 non-refrigerated bar counters with waste bin drawer and further components, casing: plastic-coated decor plate 400/790, waste bin drawer 2 x 6,5 l incl. storage comp. (top), eff. h. 225 mm 400/790, top: roll-out drawer, eff. h. 95 mm, bottom: waste bin drawer 2 x 6,5 l 500/790, waste bin drawer 2 x 22 l incl. storage comp. (top), eff. h. 225 mm 500/790, top: roll-out drawer, eff. h. 95 mm, bottom: waste bin drawer 2 x 22 l waste bin drawer incl. storage compartment (top) httbh5076z httbn4076z httbn4076z2 httbn5076z httbn5076z2 non-refrigerated bar counters with waste bin drawer and further components, casing: NIROSTA (.40) 400/790, waste bin drawer 2 x 6,5 l incl. storage comp. (top), eff. h. 225 mm 400/790, top: roll-out drawer, eff. h. 95 mm, bottom: waste bin drawer 2 x 6,5 l 500/790, waste bin drawer 2 x 22 l incl. storage comp. (top), eff. h. 225 mm 500/790, top: roll-out drawer, eff. h. 95 mm, bottom: waste bin drawer 2 x 22 l Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. I/28

180 HAGOLA-neutral bar counters (HTT) Business Class, construction height 790 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth httoh httoh httoh httoh open modules, casing: plastic-coated decor plate 400/790, open module with intermediate shelf, eff. height 660 mm 500/790, open module with intermediate shelf, eff. height 660 mm 550/790, open module with intermediate shelf, eff. height 660 mm 600/790, open module with intermediate shelf, eff. height 660 mm open module with intermediate shelf httoh open module with intermediate shelf httoh httbn httbn40760 httbn httbn httbn50760 httbn httbn httbn httbn open modules, casing: NIROSTA (.40) 400/790, open module with intermediate shelf, eff. height 680 mm 400/790, open module for Gastronorm-bowls, eff. height 680 mm 500/790, open module with intermediate shelf, eff. height 680 mm 500/790, open module with drawer casings without front, eff. h. x 220 mm 500/790, open module, intended for dish washer baskets, eff. h. 680 mm 550/790, open module with intermediate shelf, eff. height 680 mm 600/790, open module with drawer casings without front, eff. h. x 220 mm 600/790, open module with intermediate shelf, eff. height 680 mm 600/790, open module, intended for dish washer baskets, eff. h. 680 mm httbn4576g6 httbn4576g7 high capacity waste bin, casing: NIROSTA (.40), (self-extinguishing) 450/790, with wing door DIN left (bottom) 450/790, with wing door DIN right (bottom) high-capacity waste bin self-extinguishing httbn4576g7 I valid from July 20 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/29

181 HAGOLA-neutral bar counters (HTT) Business Class, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth non-refrigerated bar counter wing door DIN right httbh6086d2 httbh086d httbh086d2 httbh4086d5 httbh4086d6 httbh5086d7 httbh5086d8 httbh5586d httbh5586d4 httbh6086d httbh6086d2 non-refrigerated bar counters with wing doors, casing: plastic-coated decor plate 00/890, installation compartment, wing door DIN left, eff. height 760 mm 00/890, installation compartment, wing door DIN right, eff. height 760 mm 400/890, wing door DIN left with intermediate shelf, eff. height 760 mm 400/890, wing door DIN right with intermediate shelf, eff. height 760 mm 500/890, wing door DIN left with intermediate shelf, eff. height 760 mm 500/890, wing door DIN right with intermediate shelf, eff. height 760 mm 550/890, wing door DIN left with intermediate shelf, eff. height 760 mm 550/890, wing door DIN right with intermediate shelf, eff. height 760 mm 600/890, wing door DIN left with intermediate shelf, eff. height 760 mm 600/890, wing door DIN right with intermediate shelf, eff. height 760 mm httbn086d httbn086d2 httbn4086d5 httbn4086d6 httbn5086d7 httbn5086d8 httbn5586d httbn5586d4 httbn6086d httbn6086d2 non-refrigerated bar counters with wing doors, casing: NIROSTA (.40) 00/890, installation compartment, wing door DIN left, eff. height 760 mm 00/890, installation compartment, wing door DIN right, eff. height 760 mm 400/890, wing door DIN left with intermediate shelf, eff. height 780 mm 400/890, wing door DIN right with intermediate shelf, eff. height 780 mm 500/890, wing door DIN left with intermediate shelf, eff. height 780 mm 500/890, wing door DIN right with intermediate shelf, eff. height 780 mm 550/890, wing door DIN left with intermediate shelf, eff. height 780 mm 550/890, wing door DIN right with intermediate shelf, eff. height 780 mm 600/890, wing door DIN left with intermediate shelf, eff. height 780 mm 600/890, wing door DIN right with intermediate shelf, eff. height 780 mm I non-refrigerated bar counter wing door DIN left httbn5086d7 non-refrigerated bar counter 2 roll-out drawers on top of each other httbh5086a2 non-refrigerated bar counters with roll-out drawers, casing: plastic-coated decor plate httbh4086a0 400/890, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 0 mm bottom httbh4086a8 400/890, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 40 mm bottom httbh4086a9 400/890, 2 roll-out drawers (one upon the other), eff. heights 45 mm top, 60 mm bottom 500/890, 2 roll-out drawers (one upon the other), eff. heights 295 mm httbh5086a2 top, 40 mm bottom httbh5086a 500/890, 2 roll-out drawers (one upon the other), eff. heights: 45 mm (top), 60 mm (bottom) httbh5086a4 500/890, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 0 mm bottom httbh5086a0 500/890, roll-out drawers (one upon the other), eff. heights 60 mm (top), 75 mm (centre), 0 mm (bottom) httbh5086a 500/890, roll-out drawers (one upon the other), eff. heights 295 mm (top), 75 mm (centre), 75 mm (bottom) non-refrigerated bar counter 2 roll-out drawers httbn4086a0 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. I/0 non-refrigerated bar counters with roll-out drawers, casing: NIROSTA (.40) httbn4086a0 400/890, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 0 mm bottom httbn4086a8 400/890, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 40 mm bottom httbn4086a9 400/890, 2 roll-out drawers (one upon the other), eff. heights 45 mm top, 60 mm bottom httbn5086a2 500/890, 2 roll-out drawers (one upon the other), eff. heights 295 mm top, 40 mm bottom httbn5086a 500/890, 2 roll-out drawers (one upon the other), eff. heights 45 mm top, 60 mm bottom httbn5086a4 500/890, 2 roll-out drawers (one upon the other), eff. heights 95 mm top, 0 mm bottom httbn5086a0 500/890, roll-out drawers (one upon the other), eff. heights 60 mm (top), 75 mm (centre), 0 mm (bottom) httbn5086a 500/890, roll-out drawers (one upon the other), eff. heights 295 mm (top), 75 mm (centre), 75 mm (bottom) valid from July 20

182 HAGOLA-neutral bar counters (HTT) Business Class, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth roll-out drawer (top) wing door DIN left (bottom) httbh5086a5 httbh4086a httbh4086a2 httbh5086a5 httbh5086a6 httbn4086a httbn4086a2 httbn5086a5 httbn5086a6 non-refrigerated bar counters with roll-out drawer and wing door, casing: plastic-coated decor plate 400/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN left, eff. height 405 mm 400/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN right, eff. height 405 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN left, eff. height 405 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN right, eff. height 405 mm non-refrigerated bar counters with roll-out drawer and wing door, casing: NIROSTA (.40) 400/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN left, eff. height 420 mm 400/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN right, eff. height 420 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN left, eff. height 420 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: wing door DIN right, eff. height 420 mm top: roll-out drawer bottom: wing door DIN right httbn4086a2 httbh4086p httbh4086p4 httbh4086a httbh5086p httbh5086p4 httbh5086a7 non-refrigerated bar counters with tilting waste bin and other components, casing: plastic-coated decor plate 400/890, tilting waste bin 5 l, in total casing height 400/890, tilting waste bin 20 l, bottom: roll-out drawer, eff. h. 0 mm 400/890, top: roll-out drawer, eff. h. 295 mm, bottom: tilting waste bin 20 l 500/890, tilting waste bin 46 l, in total casing height 500/890, tilting waste bin 26 l, bottom: roll-out drawer, eff. h. 0 mm 500/890, top: roll-out drawer, eff. h. 295 mm, bottom: tilting waste bin 26 l roll-out drawer (top) tilting waste bin (bottom) httbh5086a7 httbn4086p httbn4086p4 httbn4086a httbn5086p httbn5086p4 httbn5086a7 non-refrigerated bar counters with tilting waste bin and other components, casing: NIROSTA (.40) 400/890, tilting waste bin 5 l, in total casing height 400/890, tilting waste bin 20 l, bottom: roll-out drawer, eff. h. 0 mm 400/890, top: roll-out drawer, eff. h. 295 mm, bottom: tilt. waste bin 20 l 500/890, tilting waste bin 46 l, in total casing height 500/890, tilt. waste bin 26 l, bottom: roll-out drawer, eff. h. 0 mm 500/890, top: roll-out drawer, eff. h. 295 mm, bottom: tilt. waste bin 26 l valid from July 20 cutlery drawer/drawer (top) wing door DIN right (bottom) httbh4086b8 httbh4086b0 httbh4086b7 httbh4086b8 httbh4086b9 httbh5086b2 httbh5086b httbh5086b4 httbh5086b5 non-refrigerated bar counters with drawer for cutlery and drawers, casing: plastic-coated decor plate 400/890, top: drawer with cutlery tray, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 50 mm 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 50 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 50 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 50 mm 500/890, top: cutlery drawer with cutlery tray, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/

183 HAGOLA-neutral bar counters (HTT) Business Class, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth top: cutlery drawer with tray bottom: x drawer httbn4086b0 httbn4086b0 httbn4086b7 httbn4086b8 httbn4086b9 httbn5086b2 httbn5086b httbn5086b4 httbn5086b5 non-refrigerated bar counters with drawer for cutlery and drawers, casing: NIROSTA (.40) 400/890, top: drawer with cutlery tray, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 70 mm 400/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 70 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 70 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 70 mm 500/890, top: drawer with cutlery tray, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each non-refrigerated bar counter 4 drawers httbh5086b httbh4086b6 httbh5086b non-refrigerated bar counters with 4 drawers, casing: plastic-coated decor plate 400/890, 4 drawers (one upon the other), eff. heights: 40 mm (top), 55 mm each (centre) and 55 mm (bottom) 500/890, 4 drawers (one upon the other), eff. heights: 40 mm (top), 55 mm each (centre) and 55 mm (bottom) httbn4086b6 httbn5086b non-refrigerated bar counters with 4 drawers, casing: NIROSTA (.40) 400/890, 4 drawers (one upon the other), eff. heights: 40 mm (top), 55 mm each (centre) and 55 mm (bottom) 500/890, 4 drawers (one upon the other), eff. heights: 40 mm (top), 55 mm each (centre) and 55 mm (bottom) I non-refrigerated bar counter 4 drawers httbn4086b6 cash register drawer/drawer (top) roll-out drawer (bottom) httbh4086g httbh4086g httbh4086g2 httbh4086g httbh4086g4 httbh5086g httbh5086g2 httbh5086g httbh5086g4 non-refrigerated bar counters with cash register drawer and other components, casing: plastic-coated decor plate 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 50 mm 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 50 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 50 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 50 mm Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. I/2 valid from July 20

184 HAGOLA-neutral bar counters (HTT) Business Class, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth cash register drawer/drawer (top) roll-out drawer (bottom) httbn4086g httbn4086g httbn4086g2 httbn4086g httbn4086g4 httbn5086g httbn5086g2 httbn5086g httbn5086g4 non-refrigerated bar counters w. cash register drawer and other components, casing: NIROSTA (.40) 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 400/890, top: cash register drawer with coin insert, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 70 mm 400/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 70 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: roll-out drawer, eff. height 60 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, bottom: x drawer, eff. height 55 mm each 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN left, eff. height 70 mm 500/890, top: cash reg. drawer w. coin insert, eff. height 40 mm, centre: drawer, eff. height 55 mm, bottom: wing door DIN right, eff. height 70 mm valid from July 20 electric cash register drawer/ drawer (top) roll-out drawer (bottom) httbh5086k top: electric cash reg. drawer centre: drawer bottom: waste bin drawer httbh5086k electric cash register drawer/ drawer (top) roll-out drawer (bottom) httbn5086k httbh4086k0 httbh4086k httbh4086k2 httbh4086k httbh4086k9 httbh5086k httbh5086k2 httbh5086k httbh5086k4 httbh5086k5 httbn4086k0 httbn4086k httbn4086k2 httbn4086k httbn4086k9 httbn5086k httbn5086k2 httbn5086k httbn5086k4 httbn5086k5 non-refrigerated bar counters with electric cash register drawer for cash register systems and further components, casing: plastic-coated decor plate 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: tilting waste bin 20 l 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: tilting waste bin 2 x 6,5 l 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN right, eff. height 400 mm 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN left, eff. height 400 mm 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: roll-out drawer, eff. height 40 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: roll-out drawer, eff. height 40 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: tilting waste bin 26 l 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: waste bin drawer 2 x 22 l 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN right, eff. height 400 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN left, eff. height 400 mm non-refrigerated bar counters with electric cash register drawer for cash register systems and further components, casing: NIROSTA (.40) 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: tilting waste bin 20 l 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: waste bin drawer 2 x 6,5 l 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, ottom: wing door DIN right, eff. height 420 mm 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN left, eff. height 420 mm 400/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: roll-out drawer, eff. height 40 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: roll-out drawer, eff. height 40 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: tilting waste bin 26 l 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: waste bin drawer 2 x 22 l 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN right, eff. height 420 mm 500/890, top: electric cash register drawer, centre: drawer, eff. height 45 mm, bottom: wing door DIN left, eff. height 420 mm Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/ I

185 HAGOLA-neutral bar counters (HTT) Business Class, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth drawer for coffee grounds (top) tilting waste bin (bottom) httbh4086s httbh4086s0 httbh4086s httbh4086s2 httbh4086s httbh4086s4 httbh5086s httbh5086s2 httbh5086s httbh5086s4 httbh5086s5 non-refrigerated bar counters with drawer for coffee grounds and further components, casing: plastic-coated decor plate 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 20 l 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 6,5 l 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 400 mm 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 400 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 26 l 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 22 l 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 400 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 400 mm I top: drawer f. coffee grounds, with GN-bowl bottom: wing door DIN left httbh5086s5 drawer for coffee grounds (top) tilting waste bin (bottom) httbn4086s httbn4086s0 httbn4086s httbn4086s2 httbn4086s httbn4086s4 httbn5086s httbn5086s2 httbn5086s httbn5086s4 httbn5086s5 non-refrigerated bar counters with drawer for coffee grounds and further components, casing: NIROSTA (.40) 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 20 l 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 6,5 l 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 420 mm 400/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 420 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: roll-out drawer, eff. height 40 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: tilting waste bin 26 l 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: waste bin drawer 2 x 22 l 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN right, eff. height 420 mm 500/890, top: drawer for coffee grounds with GN-bowl 2/, 200 mm depth, bottom: wing door DIN left, eff. height 420 mm waste bin drawer incl. storage compartment (top) httbh5086z Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. I/4 httbh4086z httbh4086z2 httbh5086z httbh5086z2 httbn4086z httbn4086z2 httbn5086z httbn5086z2 non-refrigerated bar counters with waste bin drawer and further components, casing: plastic-coated decor plate 400/890, waste bin drawer 2 x 6,5 l incl. storage comp. (top), eff. h. 25 mm 400/890, top: roll-out drawer, eff. h. 295 mm, bottom: waste bin drawer 2 x 6,5 l 500/890, waste bin drawer 2 x 22 l incl. storage comp. (top), eff. h. 25 mm 500/890, top: roll-out drawer, eff. h. 295 mm, bottom: waste bin drawer 2 x 22 l non-refrigerated bar counters with waste bin drawer and further components, casing: NIROSTA (.40) 400/890, waste bin drawer 2 x 6,5 l incl. storage comp. (top), eff. h. 25 mm 400/890, top: roll-out drawer, eff. h. 295 mm, bottom: waste bin drawer 2 x 6,5 l 500/890, waste bin drawer 2 x 22 l incl. storage comp. (top), eff. h. 25 mm 500/890, top: roll-out drawer, eff. height 295 mm, bottom: waste bin drawer 2 x 22 l valid from July 20

186 HAGOLA-neutral bar counters (HTT) Business Class, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: 9 mm plastic-coated decor plate V00, surrounding 2 mm softline edge or NIROSTA (.40) brushed surface, 600 mm depth httoh httoh httbh httoh open modules, casing: plastic-coated decor plate 400/890, open module with intermediate shelf, eff. height 760 mm 500/890, open module with intermediate shelf, eff. height 760 mm 550/890, open module with intermediate shelf, eff. height 760 mm 600/890, offenes Modul für Einbaugeräte (mit Frontblenden) open module with intermediate shelf httoh httbn httbn40860 httbn httbn httbn httbn httbn httbn httbn httbn open modules, casing: NIROSTA (.40) 400/890, open module with intermediate shelf, eff. height 780 mm 400/890, open module, eff. height 780 mm, for Gastronorm-bowls 400/890, open module with drawer casings without front, eff. h. x 255 mm 500/890, open module with intermediate shelf, eff. heights 780 mm 500/890, open module with drawer casings w/o. front, eff. h. x 255 mm 500/890, open module, intended for dish washer baskets, eff. height 780 mm 550/890, open module with intermediate shelf, eff. height 780 mm 600/890, open module with drawer casings without front, eff. h. x 255 mm 600/890, open module with intermediate shelf, eff. height 780 mm 600/890, open module, intended for dish washer baskets, eff. h. 780 mm open module with intermediate shelf httbn httbn4586g6 httbn4586g7 high capacity waste bin, casing: NIROSTA (.40), (self-extinguishing) 450/890, with wing door DIN left (bottom) 450/890, with wing door DIN right (bottom) I valid from July 20 Remarks: All non-refrigerated bar counters are also available in 500 and 700 mm depth. For base rails, compact base and adapting pieces, please refer to "accessory for neutral bar counters" on page I/6. Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/5

187 HAGOLA-neutral bar counters (HTT) accessory for neutral bar counters Business Class base rail 20 x 20 mm zctso base rail 0 x 40 mm zctso zctso zctso zctso8 zctso4 zctso6 zctso5 zctso7 accessory pair of base rails 20 x 20 mm, aluminium, mounted per running metre pair of base rails 0 x 40 mm, aluminium, mounted per running metre pair of base rails 60 x 50 mm, aluminium, mounted per running metre compact base, blind panel Tacon black, 00 mm high, with adjustable legs from 85 to 50 mm height, per running metre compact base, blind panel covered w. NIROSTA (.40) linen-optic surface, 00 mm high, w. adjustable legs from 85 to 50 mm height, per running metre compact base, blind panel covered with NIROSTA (.40) brushed surface, 00 mm high, with adjustable legs from 85 to 50 mm height, per running metre compact base, blind panel covered with aluminium (stainless steel optics), 00 mm high, with adjustable legs from 85 to 50 mm height, per running metre compact base 00 mm high zctso6 adapting pieces for construction height 790 mm zctpg2 straight faceplate, 00 x 790 mm (wxh), NIROSTA (.40) brushed surface zctpg straight faceplate, 50 x 790 mm (wxh), NIROSTA (.40) brushed surface zctpg25 straight faceplate, with cut-out for control unit type 42, 60 x 790 mm (WxH), NIROSTA (.40) brushed surface adapting pieces for construction height 890 mm zctpg6 straight faceplate, 00 x 890 mm (wxh), NIROSTA (.40) brushed surface zctpw angle faceplate 90, 00 x 00 x 890 mm, NIROSTA (.40) brushed surface zctpg26 straight faceplate, with cut-out for control unit type 42, 60 x 890 mm (WxH), NIROSTA (.40) brushed surface straight faceplate with cut-out for control unit type 42 zctpg25 zctdiv5 zctdiv6 locking devices for fronts cylinder lock for wing door- and roll-out drawer front (neutral bar counter) cylinder lock for drawer front (neutral bar counter) I I/6 valid from July 20

188 HAGOLA-neutral bar counters (HTT) First Class, construction height 790 mm for soft drink containers fronts: NIROSTA (.40) linen-optic surface, casing: NIROSTA (.40), 600 mm depth httfn8076d7 httfn0076d2 httfn076d2 tube framework racks for soft drink containers with closed wing door, with 40 mm base rail, 80 mm total height 800/790, wing door DIN left and DIN right 000/790, wing door DIN left and DIN right 00/790, wing door DIN left and DIN right soft drink container httfn8076d7 httfn8076d6 httfn0076d httfn076d httafg httafg2 httafg tube framework racks for soft drink container with air supply and deaeration,with 40 mm base rail, 80 mm total height 800/790, wing door DIN left and DIN right 000/790, wing door DIN left and DIN right 00/790, wing door DIN left and DIN right floor tub, not mounted for 800 mm width for 000 mm width for 00 mm width httafg7 httafg8 httafg9 floor tub, fixed for 800 mm width for 000 mm width for 00 mm width soft drink container with air supply and deaeration httfn8076d6 httafgrw httafgrw2 httafgrw rear wall cassette, welded-in for 800 mm width for 000 mm width for 00 mm width httafgsw sidewall cassettes, welded-in sidewall cassette, left or right side welded-in First Class, construction height 890 mm for soft drink containers fronts: NIROSTA (.40) linen-optic surface, casing: NIROSTA (.40), 600 mm depth soft drink container httfn8086d7 httfn8086d7 httfn0086d2 httfn086d2 httfn8086d6 httfn0086d httfn086d tube framework racks for soft drink container with closed wing door, with 40 mm base rail, 90 mm total height 800/890, wing door DIN left and DIN right 000/890, wing door DIN left and DIN right 00/890, wing door DIN left and DIN right tube framework racks for soft drink container with air supply and deaeration, with 40 mm base rail, 90 mm total height 800/890, wing door DIN left and DIN right 000/890, wing door DIN left and DIN right 00/890, wing door DIN left and DIN right I httafg httafg2 httafg floor tub, not mounted for 800 mm width for 000 mm width for 00 mm width valid from July 20 soft drink container with air suply and deaeration httfn8086d6 httafg7 httafg8 httafg9 httafgrw4 httafgrw5 httafgrw6 httafgsw floor tub, fixed for 800 mm width for 000 mm width for 00 mm width rear wall cassette, welded-in for 800 mm width for 000 mm width for 00 mm width sidewall cassettes, welded-in sidewall cassette, left or right side welded-in Technical and pricewise modifications reserved. Our known General Conditions of Delivery and Payment are valid. I/7

189 HAGOLA-neutral bar counters (HTT) Business Class, construction height 790 mm for soft drink containers fronts: NIROSTA (.40) brushed surface, casing: NIROSTA (.40), 600 mm depth httbn8076d7 httbn0076d2 httbn076d2 tube framework racks for soft drink containers with closed wing door, with 40 mm base rail, 80 mm total height 800/790, wing door DIN left and DIN right 000/790, wing door DIN left and DIN right 00/790, wing door DIN left and DIN right soft drink container httbn8076d7 httbn8076d6 httbn0076d httbn076d tube framework racks for soft drink container with air supply and deaeration,with 40 mm base rail, 80 mm total height 800/790, wing door DIN left and DIN right 000/790, wing door DIN left and DIN right 00/790, wing door DIN left and DIN right httafg httafg2 httafg floor tub, not mounted for 800 mm width for 000 mm width for 00 mm width soft drink container with air supply and deaeration httbn8076d6 httafg7 httafg8 httafg9 httafgrw httafgrw2 httafgrw floor tub, fixed for 800 mm width for 000 mm width for 00 mm width rear wall cassette, welded-in for 800 mm width for 000 mm width for 00 mm width httafgsw sidewall cassettes, welded-in sidewall cassette, left or right side welded-in Business Class, construction height 890 mm for soft drink containers fronts: NIROSTA (.40) brushed surface, casing: NIROSTA (.40), 600 mm depth I soft drink container httbn8086d7 httbn8086d7 httbn0086d2 httbn086d2 httbn8086d6 httbn0086d httbn086d tube framework racks for soft drink container with closed wing door, with 40 mm base rail, 90 mm total height 800/890, wing door DIN left and DIN right 000/890, wing door DIN left and DIN right 00/890, wing door DIN left and DIN right tube framework racks for soft drink container with air supply and deaeration, with 40 mm base rail, 90 mm total height 800/890, wing door DIN left and DIN right 000/890, wing door DIN left and DIN right 00/890, wing door DIN left and DIN right httafg httafg2 httafg floor tub, not mounted for 800 mm width for 000 mm width for 00 mm width soft drink container with air supply and deaeration httbn8086d6 I/8 httafg7 httafg8 httafg9 httafgrw4 httafgrw5 httafgrw6 httafgsw floor tub, fixed for 800 mm width for 000 mm width for 00 mm width rear wall cassette, welded-in for 800 mm width for 000 mm width for 00 mm width sidewall cassettes, welded-in sidewall cassette, left or right side welded-in valid from July 20

190 HAGOLA-cocktail station (HCS) cocktail station Description Cocktail station, full-length work top (no joints containing dirt), substructure in modular construction, complete in NIROSTA (.40) brushed surface cocktail station, like model Florida (without decoration, GN-bowls and shelves) Version (like a. m. illustration) work top: - NIROSTA (.40) brushed surface - drip depression incl. prism drip plate* and chopping board - installed glass pressure rinser - insulated tub (placed underneath) with hole plate and partition (to divide ice cubes and crushed ice) - waste water sink incl. stainless steel inset - wall panel (660 mm depth) or with surrounding downward edge (700 mm depth) ingredients board for 5 x GN-bowls /9, 00 mm deep and additional storage space for bottles, inclined, 40 substructure, complete in NIROSTA (.40) - open modules with faceplate (top) - speed rail (hang-in rack) as storage space for blender and bottles - bottle stairs (top) with open compartment (bottom) * Prism drip plates are protected by European patent. J valid from July 20 J/

191 HAGOLA-cocktail station (HCS) cocktail station Different versions HAGOLA offers six basic models in Business Class allowing for incredible bar counter design flexibility when combined. 660/ model Hawaii model Georgia J model Arizona J/2 model Florida valid from July 20

192 4 HAGOLA-cocktail station (HCS) cocktail station Different versions and accessories 660/ model California Accessories model Virginia speed rail (hang-in rack), e.g. for positioning the blender speed rail (hang-in rack), e.g. as storage space for bottles J additional speed rail (hang-in rack), e.g. as storage space for bottles ingredients board (to be placed on the work top), having a 5 inclination, intended for GN-bowls valid from July 20 ingredients board (to be placed on the work top), having a 40 inclination, intended for GN-bowls and bottles (GN-bowls are not within the scope of delivery! Please refer to Accessory.) J/

193 HAGOLA-cocktail station (HCS) Business Class, construction height 790 mm fronts: NIROSTA (.40) brushed surface, casing: NIROSTA (.40) model "Hawaii" without Gastronormbowls hcsb0587 hcsb0586 hcsb0587 model "Hawaii" 050 x 880 x 660 mm, wall panel, work top, drip depression with prism drip plates and chopping board, glass pressure rinser, insulated tub (placed underneath) with divider, ingredients board, open module with 2 speed rails (hang-in racks) 050 x 880 x 700 mm, downward edge, work top, drip depression with prism drip plates and chopping board, glass pressure rinser, insulated tub (placed underneath) with divider, ingredients board, open module with 2 speed rails (hang-in racks) model "Georgia" without Gastronormbowls hcsb05862 hcsb05862 hcsb05872 model "Georgia" 050 x 880 x 660 mm, wall panel, work top, insulated tub (placed underneath) with sliding cover, hole plates and dividers, ingredients board, open module with 2 speed rails (hang-in racks) 050 x 880 x 700 mm, downward edge, work top, insulated tub (placed underneath) with sliding cover, hole plates and dividers, ingredients board, open module with 2 speed rails (hang-in racks) J model "Arizona" without Gastronorm-bowls hcsb5586 hcsb5586 hcsb5587 model "Arizona" 550 x 880 x 660 mm, wall panel, work top, insulated tub (placed underneath) with sliding cover, hole plate and divider, sink 200 mm deep with punched insert, drip depression with prism drip plates, chopping board and glass pressure rinser, ingredients board, two open modules with 2 speed rails (hang-in racks) and bottle stairs 550 x 880 x 700 mm, downward edge, work top, insulated tub (placed underneath) with sliding cover, hole plate and divider, sink 200 mm deep with punched insert, drip depression with prism drip plates, chopping board and glass pressure rinser, ingredients board, two open modules with 2 speed rails (hang-in racks) and bottle stairs model "Florida" without Gastronormbowls hcsb J/4 hcsb hcsb model "Florida" 2050 x 880 x 660 mm, wall panel, work top with drip depression and prism drip plates, chopping board, glass pressure rinser, insulated tub (placed underneath) with divider, sink with punched insert, ingredients board, open modules with 2 speed rails (hang-in racks), bottle stairs 2050 x 880 x 700 mm, downward edge, work top with drip depression and prism drip plates, chopping board, glass pressure rinser, insulated tub (placed underneath) with divider, sink with punched insert, ingredients board, open modules with 2 speed rails (hang-in racks), bottle stairs For speed rails, ingredients board etc. please refer to "accessory for cocktail stations" on page J/9. valid from July 20

194 HAGOLA-cocktail station (HCS) Business Class, construction height 790 mm fronts: NIROSTA (.40) brushed surface, casing: NIROSTA (.40) model "Virginia" without Gastronorm-bowls hcsb0586 hcsb0586 hcsb0587 model "Virginia" 050 x 880 x 660 mm, wall panel, work top, drip depression with prism drip plates, insulated tub (placed underneath) with sliding cover, hole plate and dividers, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, ingredients board and storage surface for bottles, module with full extension drawers, 4 open modules with speed rails (hang-in racks), tilting waste bin and bottle stairs 050 x 880 x 700 mm, downward edge, work top, drip depression with prism drip plates, insulated tub (placed underneath) with sliding cover, hole plate and dividers, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, ingredients board and storage surface for bottles, module with full extension drawers, 4 open modules with speed rails (hang-in racks), tilting waste bin and bottle stairs model "California without Gastronorm-bowls hcsb05862 hcsb05862 hcsb05872 model "California" 050 x 880 x 660 mm, wall panel, work top, insulated tub (placed underneath) with sliding cover, hole plate and divider, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with unched insert, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, insulated tub (placed underneath) with sliding cover, hole plate and divider, 2 ingredients boards, open modules with 4 speed rails (hang-in racks) and bottle stairs 050 x 880 x 700 mm, downward edge, work top, insulated tub (placed underneath) with sliding cover, hole plate and divider, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, insulated tub (placed underneath) with sliding cover, hole plate and divider, 2 ingredients boards, open modules with 4 speed rails (hang-in racks) and bottle stairs J httee2 httbd5 httbd6 httba httba4 httbz httbp front NIROSTA (.40) brushed surface for neutral bar counters 500/000 x 790/890 x 600 mm individual equipment for the open compartments shelf wing door DIN left wing door DIN right roll-out drawer, eff. height 95 mm full extension drawer, eff. height 95 mm waste bin drawer, 2 x 6 l tilting waste bin 20 l valid from July 20 For speed rails, ingredients board etc. please refer to "accessory for cocktail stations" on page J/9. J/5

195 HAGOLA-cocktail station (HCS) Business Class, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: NIROSTA (.40) model "Hawaii" without Gastronormbowls hcsb0597 hcsb0596 hcsb0597 model "Hawaii" 050 x 980 x 660 mm, wall panel, work top with drip depression, chopping board, glass pressure rinser, insulated tub (placed underneath) with divider, ingredients board, open module with 2 speed rails (hangin racks) 050 x 980 x 700 mm, downward edge, work top with drip depression, chopping board, glass pressure rinser, insulated tub (placed underneath) with divider, ingredients board, open module with 2 speed rails (hang-in racks) model "Georgia" without Gastronormbowls hcsb05962 hcsb05962 hcsb05972 model "Georgia" 050 x 980 x 660 mm, wall panel, work top, insulated tub (placed underneath) with sliding cover, hole plates and dividers, ingredients board, open module with 2 speed rails (hang-in racks) 050 x 980 x 700 mm, downward edge, work top, insulated tub (placed underneath) with sliding cover, hole plates and dividers, ingredients board, open module with 2 speed rails (hang-in racks) model "Arizona" without Gastronormbowls hcsb5596 hcsb5596 hcsb5597 model "Arizona" 550 x 980 x 660 mm, wall panel, work top, insulated tub (placed underneath) with sliding cover, hole plate and divider, sink 200 mm deep with punched insert, drip depression with prism drip plates, chopping board and glass pressure rinser, ingredients board, 2 open modules with 2 speed rails (hang-in racks) and bottle stairs 550 x 980 x 700 mm, downward edge, work top, insulated tub (placed underneath) with sliding cover, hole plate and divider, sink 200 mm deep with punched insert, drip depression with prism drip plates, chopping board and glass pressure rinser, ingredients board, 2 open modules with 2 speed rails (hang-in racks) and bottle stairs J model "Florida" without Gastronormbowls hcsb hcsb hcsb model "Florida" 2050 x 980 x 660 mm, wall panel, work top with drip depression, chopping board, glass pressure rinser, insulated tub (placed underneath) with divider, pour-out sink with insert, ingredients board, open modules with 2 speed rails (hang-in racks), bottle stairs 2050 x 980 x 700 mm, downward edge, work top with drip depression, chopping board, glass pressure rinser, insulated tub (placed underneath) with divider, pour-out sink with insert, ingredients board, open modules with 2 speed rails (hang-in racks), bottle stairs For speed rails, ingredients board etc. please refer to "accessory for cocktail stations" on page J/9. J/6 valid from July 20

196 HAGOLA-cocktail station (HCS) Business Class, construction height 890 mm fronts: NIROSTA (.40) brushed surface, casing: NIROSTA (.40) model "Virginia" without Gastronormbowls hcsb0596 hcsb0596 hcsb0597 model "Virginia" 050 x 980 x 660 mm, wall panel, work top, drip depression with prism drip plates, insulated tub (placed underneath) with sliding cover, hole plate and dividers, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, ingredients board and storage surface for bottles, module with full extension drawers, 4 open modules with speed rails (hang-in racks), tilting waste bin and bottle stairs 050 x 980 x 700 mm, downward edge, work top, drip depression with prism drip plates, insulated tub (placed underneath) with sliding cover, hole plate and dividers, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, ingredients board and storage surface for bottles, module with full extension drawers, 4 open modules with speed rails (hang-in racks), tilting waste bin and bottle stairs model "California" without Gastronormbowls hcsb05962 hcsb05962 hcsb05972 model "California" 050 x 980 x 660 mm, wall panel, work top, insulated tub (placed underneath) with sliding cover, hole plate and divider, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, insulated tub (placed underneath) with sliding cover, hole plate and divider, 2 ingredients boards, open modules with 4 speed rails (hang-in racks) and bottle stairs 050 x 980 x 700 mm, downward edge, work top, insulated tub (placed underneath) with sliding cover, hole plate and divider, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, drip depression with prism drip plates, chopping board and installed glass pressure rinser, sink 200 mm deep with punched insert, insulated tub (placed underneath) with sliding cover, hole plate and divider, 2 ingredients boards, open modules with 4 speed rails (hang-in racks) and bottle stairs J httee2 httbd5 httbd6 httba httba4 httbz httbp front NIROSTA (.40) brushed surface for neutral bar counters 500/000 x 790/890 x 600 mm individual equipment for the open compartments shelf wing door DIN left wing door DIN right roll-out drawer, eff. height 95 mm full extension drawer, eff. height 95 mm waste bin drawer, 2 x 6 l tilting waste bin 20 l valid from July 20 For speed rails, ingredients board etc. please refer to "accessory for cocktail stations" on page J/9. J/7

197 HAGOLA-cocktail station (HCS) "Business Class, construction height 790/890 mm with designer handles fronts: NIROSTA (.40) brushed surface, casing: NIROSTA (.40) open module with blender rack httbn5076o httbn5076o httbn5076o4 httbn5076o5 httbn httbn httbn0076o2 httbn0076o5 httbn0076o6 httbn0076o httbn0076o httbn0076o4 neutral bar counters "Business Class", construction height 790 mm 500/790, top: w. blender rack, bottom: open 500/790, top: sink faceplate, bottom: open 500/790, top: bottle stairs, bottom: open 500/790, open module with intermediate shelf, eff. height 680 mm 500/790, open module with drawer casings w/o. front, eff. h. x 220 mm 000/790, top: bottle stairs, bottom: left/right open 000/790, top: bottle stairs, bottom: open with shelf left/right 000/790, top: bottle stairs, bottom: left open, right: shelf 000/790, top: sink faceplate, bottom: left/right open 000/790, top: sink faceplate, bottom: left shelf, with wall, right open 000/790, top: sink faceplate, bottom: left open, with wall, right shelf open module with sink faceplate httbn5076o4 top: bottle stairs/ bottom: open httbn5076o5 httbn5086o httbn5086o4 httbn5086o5 httbn httbn httbn0086o2 httbn0086o5 httbn0086o6 httbn0086o httbn0086o httbn0086o4 neutral bar counters "Business Class", construction height 890 mm 500/890, top: w. blender rack, bottom: open 500/890, top: sink faceplate, bottom: open 500/890, top: bottle stairs, bottom: open 500/890, open module with intermediate shelf, eff. height 780 mm 500/890, open module with drawer casings w/o. front, eff. h. x 255 mm 000/790, top: bottle stairs, bottom: left/right open 000/890, top: bottle stairs, bottom: open with shelf left/right 000/890, top: bottle stairs, bottom: left open, right: shelf 000/890, top: sink faceplate, bottom: left/right open 000/890, top: sink faceplate, bottom: left shelf, with wall, right open 000/890, top: sink faceplate, bottom: left open, with wall, right shelf J top: bottle stairs/ bottom: open httbn0076o2 httee2 httbd5 httbd6 httba httba4 httbz httbp front NIROSTA (.40) brushed surface for neutral bar counters 500/000 x 790/890 x 600 mm individual equipment for the open compartments shelf wing door DIN left wing door DIN right roll-out drawer, eff. height 95 mm full extension drawer, eff. height 95 mm waste bin drawer, 2 x 6 l tilting waste bin 20 l top: sink faceplate/ bottom: open httbn0076o J/8 top: sink faceplate/ bottom: shelf (left), with wall, open (right) httbn0076o For speed rails, ingredients board etc. please refer to "accessory for cocktail stations" on page J/9. valid from July 20

198 accessory for cocktail station (HCS) accessory barboard per running metre with front panelling zcsdiv4 zcsdiv8 zcsdiv4 zcsdiv7 zcsdiv8 zcsdiv9 zcsdiv20 zcsdiv5 zcsdiv6 zsagn9 zsaag8 accessory basic version for barboard with front panelling, dimensions: acc. to drawing barboard with front panelling per running metre, dimensions: acc. to drawing illumination, mounted underneath the barboard, per running metre speed rail (hang-in rack), 480 x 220/ x 200 mm, as rack for a blender speed rail (hang-in rack), 480 x 220/66 x 00 mm, as bottle rack additional speed rail (hang-in rack), 480 x 02/66 x 00 mm, as bottle rack ingredients board, inclined (5 ), 452 x 54/00 x 200 mm, without Gastronorm-bowls ingredients board, inclined (40 ), 900 x 56 x 288 mm, without Gastronorm-bowls GN /9, 0,9 liter pop-up set with non-return valve and siphon for cooling tubs/sinks, for preventing microbial re-contaminaton, /4" ingredients board (5 ) 452 x 54/00 x 200 mm zcsdiv5 speed rail (hang-in rack) for a blender 480 x 220/ x 200 mm zcsdiv8 zcsdiv9 zcsdiv0 zcsdiv zcsdiv2 zcsdiv zcsdiv4 zcsdiv5 zcsdiv6 zcsdiv7 hand rails/foot rails in stainless steel brushed surface, Ø ½" (8, mm) handrail for model "Hawaii", with handrail bracket (top), tube, length: 600 mm handrail for model "New York", with handrail bracket (top), tube, length: 600 mm handrail for model "Florida", with handrail bracket (top), tube, length: 600 mm handrail for model "Hawaii", with handrail bracket (bottom), tube, length: 600 mm handrail for model "New York", with handrail bracket (bottom), tube, length: 600 mm handrail for model "Florida", with handrail bracket (bottom), tube, length: 600 mm footrail for model "Hawaii", tubes, length: 050 mm footrail for model "New York", tubes, length: 050 mm footrail for model "Florida", tubes, length: 050 mm J valid from July 20 J/9

199 J/0 valid from July 20

200 HAGOLA-warming-up cabinets (HWS) coffee station Caliente Description Warming-up cabinet consisting of: insulated casing, inside and outside in NIROSTA (.40), optional with roll-out drawer or wing door, drawer for coffee grounds incl. knock-bar, drawer for cutlery, tilting waste bin coffee station Caliente, plug-in version (without decoration) Version work top in NIROSTA (.40) brushed surface - with wall panel (560/660 mm deep) or with surrounding downward edge (600/700 mm deep) front NIROSTA (.40) linen-optic surface or brushed surface substructure in NIROSTA (.40) Above mentioned illustration from left to right: plug-in warming-up cabinet - insulated casing, inside and outside in NIROSTA (.40) - plug-in connection 20 V / 50 Hz, heating capacity 500 Watt circulating air - illuminated main switch and infinitely adjustable thermostat from 0 C to 80 C - 4 full-extension drawers without floor, intended for dish washer racks 400 x 400 mm or 500 x 500 mm (optional available) neutral counter - with drawer for cutlery incl. cutlery tray, drawer and wing door neutral counter - with drawer for coffee grounds and tilting waste bin base rail: 40 mm height K valid from July 20 K/

201 980 HAGOLA-warming-up cabinets (HWS) coffee station Caliente Perfect to the last detail! for perfectly pre-warmed tableware plenty of stowage place everything is kept handy integrates everywhere next to the guidance rails, even the drawer rollers are made of stainless steel /600/660/ / / K full-extension drawer for cups, plates, glasses or for dishwasher racks (400 x 400 mm or 500 x 500 mm, optional available) K/2 illuminated main switch, adjustable from 0 C to 80 C drawer for coffee grounds incl. knock bar valid from July 20

202 HAGOLA-warming-up cabinets (HWS) First Class -warming-up cabinets, construction height 790 mm fronts: NIROSTA (.40) linen-optic surface casing (inside and outside): made of NIROSTA (.40), insulated, 500 mm and 600 mm depth coffee station with downw. edge 50 x 880 x 600 mm hwsf086 hwsf085 hwsf086 hwsfn5075a hwsfn5075a2 coffee station "Caliente", plug-in, 500 mm depth, adjustable from 0 to 80 C 50 x 880 x 560 mm, work top with wall panel, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin 50 x 880 x 600 mm, work top with downward edge, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin warming-up cabinets, plug-in, 500 mm depth, for dish washer baskets 400 x 400 mm, adjustable from 0 to 80 C 500/790, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/205 mm 500/790, full ext. drawers (one upon the other), w/o floor, eff. h. 95/70/70 mm warming-up cabinet eff. height 60/70/205 mm hwsfn5075a hwsfn5075a hwsfn5075a4 hwsfn5075a5 hwsfn5075a6 hwsfn5075d hwsfn5075d2 universal warming-up cabinets, 500 mm depth, plug-in, adjustable from 0 to 80 C 500/790, roll-out drawers, eff. heights 295/05 mm 500/790, roll-out drawers, eff. heights 245/55 mm 500/790, roll-out drawers, eff. heights 95/405 mm 500/790, roll-out drawers, eff. heights 95/205 mm 500/790, wing door DIN left, eff. height 680 mm, with grid shelf 500/790, wing door DIN right, eff. height 680 mm, with grid shelf universal-warming-up cabinet eff. heights 245/55 mm hwsfn5075a4 coffee station with downw. edge 50 x 880 x 700 mm hwsf087 hwsf0862 hwsf087 hwsfn5076a hwsfn5076a2 coffee station "Caliente", plug-in, 600 mm depth, adjustable from 0 to 80 C 50 x 880 x 660 mm, work top with wall panel, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin 50 x 880 x 700 mm, work top with downward edge, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin warming-up cabinets, plug-in, 600 mm depth, for dish washer baskets 400 x 400 mm, adjustable from 0 to 80 C 500/790, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/205 mm 500/790, full ext. drawers (one upon the other), w/o floor, eff. h. 95/70/70 mm warming-up cabinet eff. heights 60/70/205 mm hwsfn5076a universal warming-up cabinet eff. heights 245/55 mm hwsfn5076a4 hwsfn5076a hwsfn5076a4 hwsfn5076a5 hwsfn5076a6 hwsfn5076d hwsfn5076d2 hwsfn6076a hwsfn6076a2 hwsfn6076a hwsfn6076a4 hwsfn6076a5 hwsfn6076a6 hwsfn6076d hwsfn6076d2 universal warming-up cabinets, 600 mm depth, plug-in, adjustable from 0 to 80 C 500/790, roll-out drawers, eff. heights 295/05 mm 500/790, roll-out drawers, eff. heights 245/55 mm 500/790, roll-out drawers, eff. heights 95/405 mm 500/790, roll-out drawers, eff. heights 95/205 mm 500/790, wing door DIN left, eff. height 680 mm, with grid shelf 500/790, wing door DIN right, eff. height 680 mm, with grid shelf warming-up cabinets, plug-in, 600 mm depth, for dish washer baskets 500 x 500 mm, adjustable from 0 to 80 C 600/790, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/205 mm 600/790, full ext. drawers (one upon the other), w/o floor, eff. h. 95/70/70 mm universal warming-up cabinets, 600 mm depth, plug-in, adjustable from 0 to 80 C 600/790, roll-out drawers, eff. heights 295/05 mm 600/790, roll-out drawers, eff. heights 245/55 mm 600/790, roll-out drawers, eff. heights 95/405 mm 600/790, roll-out drawers, eff. heights 95/205 mm 600/790, wing door DIN left, eff. height 680 mm, with grid shelf 600/790, wing door DIN right, eff. height 680 mm, with grid shelf K valid from July 20 universal warming-up cabinet wing door DIN left hwsfn5076d locking devices for fronts zctdiv29 cylinder lock for wing door- and roll-out drawer front (warming-up cabinets) For drawers for coffee grounds, drawers for cutlery etc. please refer to: non-refrigerating bar counters on pages I/ - I/6. Remarks: Diswasher racks for the drawers are optional available. When placing the order, please indicate the exit of the cables (left or right)! K/

203 HAGOLA-warming-up cabinets (HWS) First Class -warming-up cabinets, construction height 890 mm fronts: NIROSTA (.40) linen-optic surface casing (inside and outside): made of NIROSTA (.40), insulated, 500 mm and 600 mm depth coffee station with downw. edge 50 x 980 x 600 mm hwsf096 warming-up cabinet eff. heights 5/45/45/45 mm hwsfn5085a hwsf095 hwsf096 hwsfn5085a hwsfn5085a2 hwsfn5085a hwsfn5085a4 hwsfn5085a5 hwsfn5085a6 hwsfn5085d hwsfn5085d2 coffee station "Caliente", plug-in, 500 mm depth, adjustable from 0 to 80 C 50 x 980 x 560 mm, work top with wall panel, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin 50 x 980 x 600 mm, work top with downward edge, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin warming-up cabinets, plug-in, 500 mm depth, for dish washer baskets 400 x 400 mm, adjustable from 0 to 80 C 500/890, full extension drawers (one upon the other), without floor, eff. heights 5/45/45/45 mm 500/890, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/05 mm 500/890, full ext. drawers (one upon the other), w/o floor, eff. h. 295/70/70 mm universal warming-up cabinets, 500 mm depth, plug-in, adjustable from 0 to 80 C 500/890, roll-out drawers, eff. heights 45/55 mm 500/890, roll-out drawers, eff. heights 295/405 mm 500/890, roll-out drawers, eff. heights 95/05 mm 500/890, wing door DIN left, eff. height 780 mm, with grid shelf 500/890, wing door DIN right, eff. height 780 mm, with grid shelf universal warming-up cabinet wing door DIN left hwsfn5085d coffee station with downw. edge 50 x 980 x 700 mm hwsf097 hwsf0962 hwsf097 hwsfn5086a hwsfn5086a2 hwsfn5086a coffee station "Caliente", plug-in, 600 mm depth, adjustable from 0 to 80 C 50 x 980 x 660 mm, work top with wall panel, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin 50 x 980 x 700 mm, work top with downward edge, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin warming-up cabinets, plug-in, 600 mm depth, for dish washer baskets 400 x 400 mm, adjustable from 0 to 80 C 500/890, full extension drawers (one upon the other), without floor, eff. heights 5/45/45/45 mm 500/890, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/05 mm 500/890, full ext. drawers (one upon the other), w/o floor, eff. h. 295/70/70 mm K warming-up cabinet eff. heights 5/45/45/45 mm hwsfn5086a universal warming-up cabinet eff. heights 45/55 mm hwsfn5086a4 hwsfn5086a4 hwsfn5086a5 hwsfn5086a6 hwsfn5086d hwsfn5086d2 hwsfn6086a hwsfn6086a2 hwsfn6086a universal warming-up cabinets, 600 mm depth, plug-in, adjustable from 0 to 80 C 500/890, roll-out drawers, eff. heights 45/55 mm 500/890, roll-out drawers, eff. heights 295/405 mm 500/890, roll-out drawers, eff. heights 95/05 mm 500/890, wing door DIN left, eff. height 780 mm, with grid shelf 500/890, wing door DIN right, eff. height 780 mm, with grid shelf warming-up cabinets, plug-in, 600 mm depth, for dish washer baskets 500 x 500 mm, adjustable from 0 to 80 C 600/890, full extension drawers (one upon the other), without floor, eff. heights 5/45/45/45 mm 600/890, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/05 mm 600/890, full ext. drawers (one upon the other), w/o floor, eff. h. 295/70/70 mm universal warming-up cabinet wing door DIN left hwsfn5086d K/4 hwsfn6086a4 hwsfn6086a5 hwsfn6086a6 hwsfn6086d hwsfn6086d2 universal warming-up cabinets, 600 mm depth, plug-in, adjustable from 0 to 80 C 600/890, roll-out drawers, eff. heights 45/55 mm 600/890, roll-out drawers, eff. heights 295/405 mm 600/890, roll-out drawers, eff. heights 95/05 mm 600/890, wing door DIN left, eff. height 780 mm, with grid shelf 600/890, wing door DIN right, eff. height 780 mm, with grid shelf locking devices for fronts zctdiv29 cylinder lock for wing door- and roll-out drawer front (warming-up cabinets) For drawers for coffee grounds, drawers for cutlery etc. please refer to: non-refrigerating bar counters (HTT) Remarks: Diswasher racks for the drawers are optional available. When placing the order, please indicate the exit of the cables (left or right)! valid from July 20

204 HAGOLA-warming-up cabinets (HWS) Business Class -warming-up cabinets, construction height 790 mm fronts: NIROSTA (.40) brushed surface casing (inside and outside): made of NIROSTA (.40), insulated, 500 mm and 600 depth coffee station with downw. edge 50 x 880 x 600 mm hwsb086 hwsb085 hwsb086 hwsbn5075a hwsbn5075a2 coffee station "Caliente", plug-in, 500 mm depth, adjustable from 0 to 80 C 50 x 880 x 560 mm, work top with wall panel, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin 50 x 880 x 600 mm, work top with downward edge, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin warming-up cabinets, plug-in, 500 mm depth, for dish washer baskets 400 x 400 mm, adjustable from 0 to 80 C 500/790, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/205 mm 500/790, full ext. drawers (one upon the other), w/o floor, eff. h. 95/70/70 mm warming-up cabinet eff. heights 60/70/205 mm hwsbn5075a universal warming-up cabinets, 500 mm depth, plug-in, adjustable from 0 to 80 C hwsbn5075a 500/790, roll-out drawers, eff. heights 295/05 mm hwsbn5075a4 500/790, roll-out drawers, eff. heights 245/55 mm hwsbn5075a5 500/790, roll-out drawers, eff. heights 95/405 mm hwsbn5075a6 500/790, roll-out drawers, eff. heights 95/205 mm hwsbn5075d 500/790, wing door DIN left, eff. height 680 mm, with grid shelf hwsbn5075d2 500/790, wing door DIN right, eff. height 680 mm, with grid shelf universal warming-up cabinet eff. heights 245/55 mm hwsbn5075a4 coffee station with downw. edge 50 x 880 x 700 mm hwsb087 hwsb0862 hwsb087 hwsbn5076a hwsbn5076a2 coffee station "Caliente", plug-in, 600 mm depth, adjustable from 0 to 80 C 50 x 880 x 660 mm, work top with wall panel, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin 50 x 880 x 700 mm, work top with downward edge, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for utlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin warming-up cabinets, plug-in, 600 mm depth, for dish washer baskets 400 x 400 mm, adjustable from 0 to 80 C 500/790, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/205 mm 500/790, full ext. drawers (one upon the other), w/o floor, eff. h. 95/70/70 mm warming-up cabinets eff. heights 60/70/205 mm hwsbn5076a hwsbn5076a hwsbn5076a4 hwsbn5076a5 hwsbn5076a6 hwsbn5076d hwsbn5076d2 universal warming-up cabinets, 600 mm depth, plug-in, adjustable from 0 to 80 C 500/790, roll-out drawers, eff. heights 295/05 mm 500/790, roll-out drawers, eff. heights 245/55 mm 500/790, roll-out drawers, eff. heights 95/405 mm 500/790, roll-out drawers, eff. heights 95/205 mm 500/790, wing door DIN left, eff. height 680 mm, with grid shelf 500/790, wing door DIN right, eff. height 680 mm, with grid shelf hwsbn6076a hwsbn6076a2 warming-up cabinets, plug-in, 600 mm depth, for dish washer baskets 500 x 500 mm, adjustable from 0 to 80 C 600/790, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/205 mm 600/790, full ext. drawers (one upon the other), w/o floor, eff. h. 95/70/70 mm K universal warming-up cabinet eff. heights 245/55 mm hwsbn5076a4 hwsbn6076a hwsbn6076a4 hwsbn6076a5 hwsbn6076a6 hwsbn6076d hwsbn6076d2 universal warming-up cabinets, 600 mm depth, plug-in, adjustable from 0 to 80 C 600/790, roll-out drawers, eff. heights 295/05 mm 600/790, roll-out drawers, eff. heights 245/55 mm 600/790, roll-out drawers, eff. heights 95/405 mm 600/790, roll-out drawers, eff. heights 95/205 mm 600/790, wing door DIN left, eff. height 680 mm, with grid shelf 600/790, wing door DIN right, eff. height 680 mm, with grid shelf valid from July 20 universal warming-up cabinet wing door DIN left hwsbn5076d locking devices for fronts zctdiv29 cylinder lock for wing door- and roll-out drawer front (warming-up cabinets) For drawers for coffee grounds, drawers for cutlery etc. please refer to: non-refrigerating bar counters (HTT) Remarks: Diswasher racks for the drawers are optional available. When placing the order, please indicate the exit of the cables (left or right)! K/5

205 HAGOLA-warming-up cabinets (HWS) Business Class -warming-up cabinet, construction height 890 mm fronts: NIROSTA (.40) brushed surface casing (inside and outside): made of NIROSTA (.40), insulated, 500 mm and 600 depth coffee station with downw. edge 50 x 980 x 600 mm hwsb096 warming-up cabinet eff. heights 5/45/45/45 mm hwsbn5085a coffee station "Caliente", plug-in, 500 mm depth, adjustable from 0 to 80 C 50 x 980 x 560 mm, work top with wall panel, warming-up cabinet with hwsb095 full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin 50 x 980 x 600 mm, work top with downward edge, warming-up cabinet hwsb096 with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin warming-up cabinets, plug-in, 500 mm depth, for dish washer baskets 400 x 400 mm, adjustable from 0 to 80 C hwsbn5085a 500/890, full extension drawers (one upon the other), without floor, eff. heights 5/45/45/45 mm hwsbn5085a2 500/890, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/05 mm hwsbn5085a 500/890, full ext. drawers (one upon the other), w/o floor, eff. h. 295/70/70 mm hwsbn5085a4 hwsbn5085a5 hwsbn5085a6 hwsbn5085d hwsbn5085d2 universal warming-up cabinets, 500 mm depth, plug-in, adjustable from 0 to 80 C 500/890, roll-out drawers, eff. heights 45/55 mm 500/890, roll-out drawers, eff. heights 295/405 mm 500/890, roll-out drawers, eff. heights 95/05 mm 500/890, wing door DIN left, eff. height 780 mm, with grid shelf 500/890, wing door DIN right, eff. height 780 mm, with grid shelf universal warming-up cabinet eff. heights 45/55 mm hwsbn5085a4 hwsb0962 hwsb097 coffee station "Caliente", plug-in, 600 mm depth, adjustable from 0 to 80 C 50 x 980 x 660 mm, work top with wall panel, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin 50 x 980 x 700 mm, work top with downward edge, warming-up cabinet with full extension drawers (without floors) for dish washer baskets, module with drawer for cutlery/drawer and wing door, module with drawer for coffee grounds/tilting waste bin coffee station with downw. edge 50 x 980 x 700 mm hwsb097 hwsbn5086a hwsbn5086a2 hwsbn5086a warming-up cabinets, plug-in, 600 mm depth, for dish washer baskets 400 x 400 mm, adjustable from 0 to 80 C 500/890, full extension drawers (one upon the other), without floor, eff. heights 5/45/45/45 mm 500/890, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/05 mm 500/890, full ext. drawers (one upon the other), w/o floor, eff. h. 295/70/70 mm K warming-up cabinet eff. heights 5/45/45/45 mm hwsbn5086a universal warming-up cabinet eff.heights 45/55 mm hwsbn5086a4 K/6 hwsbn5086a4 hwsbn5086a5 hwsbn5086a6 hwsbn5086d hwsbn5086d2 hwsbn6086a hwsbn6086a2 hwsbn6086a universal warming-up cabinets, 600 mm depth, plug-in, adjustable from 0 to 80 C 500/890, roll-out drawers, eff. heights 45/55 mm 500/890, roll-out drawers, eff. heights 295/405 mm 500/890, roll-out drawers, eff. heights 95/05 mm 500/890, wing door DIN left, eff. height 780 mm, with grid shelf 500/890, wing door DIN right, eff. height 780 mm, with grid shelf warming-up cabinets, plug-in, 600 mm depth, for dish washer baskets 500 x 500 mm, adjustable from 0 to 80 C 600/890, full extension drawers (one upon the other), without floor, eff. heights 5/45/45/45 mm 600/890, full ext. drawers (one upon the other), w/o floor, eff. h. 60/70/05 mm 600/890, full ext. drawers (one upon the other), w/o floor, eff. h. 295/70/70 mm universal warming-up cabinets, 600 mm depth, plug-in, adjustable from 0 to 80 C hwsbn6086a4 600/890, roll-out drawers, eff. heights 45/55 mm hwsbn6086a5 600/890, roll-out drawers, eff. heights 295/405 mm hwsbn6086a6 600/890, roll-out drawers, eff. heights 95/05 mm hwsbn6086d 600/890, wing door DIN left, eff. height 780 mm, with grid shelf hwsbn6086d2 600/890, wing door DIN right, eff. height 780 mm, with grid shelf universal warming-up cabinet wing door DIN left hwsbn5086d zctdiv29 locking devices for fronts cylinder lock for wing door- and roll-out drawer front (warming-up cabinets) For drawers for coffee grounds, drawers for cutlery etc. please refer to: non-refrigerating bar counters on pages I/ - I/6. Remarks: Diswasher racks for the drawers are optional available. When placing the order, please indicate the exit of the cables (left or right)! valid from July 20

206 HAGOLA-system cooking counter (HSK) Cookie Description Several hot plates, e.g. Ceran, induction or grill (optional), ingredients board (intended for GN-bowls), modular construction, almost infinite number of combination possibilities, speed rail (hang-in rack) e.g. as storage space for vinegar or oil bottles system cooking counter Cookie Version: work top: - in NIROSTA (.40) brushed surface - 2 deep-drawn depressions incl. chopping board - cut-out for the hot plate - surrounding downward edge (700 mm deep) substructure in NIROSTA (.40) from left to right: - open modules with shelf 500 mm - 2 speed rails (hang-in racks) as storage space for bottles - 2 modules with roll-out drawer and faceplate (top) double power socket, 20 V L valid from July 20 L/

207 HAGOLA-system cooking counter (HSK) Cookie plenty of stowage place everything is kept handy modular construction remarkable details e.g. an ingredients board for GN-bowls and multi-functional speed rails (hang-in racks) e.g. as storage space for vinegar or oil bottles Hot Plate Options: Different models for individual demands. L Ceran-Hot-Plate (built-in version) dimensions: 288 x 50 mm (width x height) cut-out dimensions: 270 x 500 mm article-no.: hgzkf4 L/2 Induction-Hot-Plate (built-in version) dimensions: 288 x 50 mm (width x depth) cut-out dimensions: 270 x 500 mm article-no.: hgzkf5 valid from July 20

208 HAGOLA-system cooking counter (HSK) Cookie, First Class / Business Class, construction height 790/890 mm fronts: NIROSTA (.40) linen-optic/brushed surface - different hobs, e.g. Ceran, induction and grill - modular construction, nearly inexhaustible combination possibilities hskf25087 hskf25097 cooking counter "Cookie", "First Class, fronts: NIROSTA (.40) linen-optic surface 2550 x 970 x 700 mm, work top with depression for chopping board, cutout for hob, open modules with shelf, 2 modules with roll-out drawers and speed rails (hang-in racks) 2550 x 070 x 700 mm, work top with depression for chopping board, cut-out for hob, open modules with shelf, 2 modules with roll-out drawers and speed rails (hang-in racks) mobile cooking counter with cut-out for hob (without Ceran hot plate) hskf25097 hskb25087 hskb25097 cooking counter "Cookie", "Business Class, fronts: NIROSTA (.40) brushed surface 2550 x 970 x 700 mm, work top with depression for chopping board, cut-out for hob, open modules with shelf, 2 modules with roll-out drawers and speed rails (hang-in racks) 2550 x 070 x 700 mm, work top with depression for chopping board, cut-out for hob, open modules with shelf, 2 modules with roll-out drawers and speed rails (hang-in racks) Ceran-hob hgzkf4 hgzkf4 hgzkf5 accessory Ceran hot plate, mounted with 2 cycle heating zones and touch control sensors, electronic temperature automatic, with residual heat display, timer - 99 minutes, connection: 400 W, cut-out dimension: 270 x 500 mm (wxh), dimensions: 288 x 50 x 80 mm induction hote plate, mounted, for induction-capable cookware, immediate power transmission, power boost function, no heating-up time, 2 power stages, pot identification, connection: 700 W, cut-out dimension: 270 x 500 mm (wxh), dimensions: 288 x 50 x 80 mm 7 7 L valid from July 20 * prices without decoration L/

209 L/4 valid from July 20

210 HAGOLA-barrel coolers (HFB) barrel coolers for Euro-KEG- or DIN-KEG-barrels Description Barrel coolers, plug-in version, complete in NIROSTA (.40) or inner floor in NIROSTA (.40), galvanised casing barrel cooler, plug-in version Version plug-in version with or 2 wing doors intended for 4, 6 or 8 Euro-KEG-/DIN-KEG-barrels incl. legs cooling unit, optional positioned on left or right side or on the top options: - galvanised casing and deep-drawn floor in NIROSTA (.40) - casing and deep-drawn floor in NIROSTA (.40) compact cooling unit, flanged on top or on left or right side: - 46 Watt (max. 2 C ambient temperature) - current: 20 V/50 Hz - automatic condensate evaporation - integrated circulating air evaporator with condensate tray control unit, preset to 6 C cold room temperature 45 mm thick elements, jointless insulation only short assembly time necessary due to centred turn fasteners M lockable wing doors that can be easily removed valid from July 20 M/

211 HAGOLA-barrel coolers (HFB) barrel coolers for Euro-KEG- or DIN-KEG-barrels plug-in compact cooling unit with automatic condensate evaporation solid stainless steel hinges, doors can be easily removed solid floor in NIROSTA (.40) due to special embossing method for Euro-KEG- or DIN-KEG-barrels element construction (45 mm thickness), short assembly time centred turn fasteners for 4 barrels* * The lateral casing of the cooling unit is available as accessory. ** The casing of the cooling unit for the galvanised versions of barrel coolers is available as accessory (for the stainless steel versions, the casing is included as standard) for 4 barrels** for 6 barrels** for 8 barrels** M M/2 special model, decorative, visible barrel cooling valid from July 20

212 HAGOLA-barrel coolers (HFB) plug-in version with or 2 wing doors for 4, 6 or 8 Euro-KEG-/DIN-KEG-barrels barrel cooler for 4 barrels hfb4v hfb4v hfb4v2 hfb4v hfb6v hfb6v2 hfb6v hfb8v hfb8v2 hfb8v plug-in barrel coolers, galvanised casing, floor NIROSTA (.40) 50 x 990 x 970 mm (wxhxd), cooling unit left, for 4 barrels 50 x 990 x 970 mm (wxhxd), cooling unit right, for 4 barrels 00 x 05 x 970 mm (wxhxd), cooling unit top, for 4 barrels 790 x 990 x 970 mm (wxhxd), cooling unit left, for 6 barrels 790 x 990 x 970 mm (wxhxd), cooling unit right, for 6 barrels 450 x 05 x 970 mm (wxhxd), cooling unit top, for 6 barrels 2240 x 990 x 970 mm (wxhxd), cooling unit left, for 8 barrels 2240 x 990 x 970 mm (wxhxd), cooling unit right, for 8 barrels 900 x 05 x 970 mm (wxhxd), cooling unit top, for 8 barrels barrel cooler for 6 barrels hfb6n hfb4n hfb4n2 hfb4n hfb6n hfb6n2 hfb6n hfb8n hfb8n2 hfb8n plug-in barrel coolers, casing and floor NIROSTA (.40) 50 x 990 x 970 mm (wxhxd), cooling unit left, for 4 barrels 50 x 990 x 970 mm (wxhxd), cooling unit right, for 4 barrels 00 x 290 x 970 mm (wxhxd), cooling unit top, for 4 barrels 790 x 990 x 970 mm (wxhxd), cooling unit left, for 6 barrels 790 x 990 x 970 mm (wxhxd), cooling unit right, for 6 barrels 450 x 290 x 970 mm (wxhxd), cooling unit top, for 6 barrels 2240 x 990 x 970 mm (wxhxd), cooling unit left, for 8 barrels 2240 x 990 x 970 mm (wxhxd), cooling unit right, for 8 barrels 900 x 290 x 970 mm (wxhxd), cooling unit top, for 8 barrels hkakf hkakf4 hkakf7 hkakf6 hkadiv24 hkabk compact cooling unit as alternate device installation position right, 46 W, for 2 x 20-l- or 2 x 240-l-barrel coolers installation position left, 46 W, for 2 x 20-l- or 2 x 240-l-barrel coolers installation position top, 660 W, R 4a, galvanised version, mech. control installation position top, 480 W, R 404a, galvanised version, electr. control panelling of the attached cooling unit, 62 x 526 x 467 mm, NIROSTA (.40) brushed cooling unit for beer line cooling, refrigerant R 4a, 60 W at -0 C VT M valid from July 20 Remarks: Please obeserve that the barrel coolers are delivered in dismantled condition. M/

213 M/4 valid from July 20

214 HAGOLA-waste bin coolers (HAK) waste bin coolers Description Waste bin cooler, plug-in version, complete in NIROSTA (.40) or floor in NIROSTA (.40), galvanised casing waste bin cooler, plug-in version Version plug-in version with or 2 wing doors intended for x and 2x 20 litres waste bins or for x and 2x 240 litres waste bins compact cooling unit, optional positioned on left or right side options: - galvanised casing and floor in NIROSTA (.40) - casing and floor in NIROSTA (.40) 45 mm thick elements, jointless insulation only short assembly time necessary due to centred turn fasteners lockable wing doors that can be easily removed lateral guidance rail incl. stop on rear side for positioning the waste bins ramp for easy loading insertion flap, made of impact-proof plastic compact cooling unit: - 45 Watt (max. 2 C ambient temperature) - current: 20 V / 50 Hz - automatic condensate evaporation - integrated circulating air evaporator (R 4a) with condensate tray control unit, preset to 5 C cold room temperature M valid from July 20 M/5

215 HAGOLA-waste bin coolers (HAK) waste bin coolers plug-in version insertion flap for max. 2 x 240 litre waste bins plug-in compact cooling unit with automatic condensate evaporation solid stainless steel hinges, doors can be easily removed smooth floor in NIROSTA (.40), easy to clean loading ramp element construction (45 mm thickness), short assembly time centred turn fasteners * casing of the cooling unit is available as accessory for x 20 litres waste bins* for 2 x 20 litres waste bins* M M/6 for x 240 litres waste bins* for 2 x 240 litres waste bins* valid from July 20

216 HAGOLA-waste bin cooler (HAK) plug-in, with wing doors, with loading ramp waste bin cooler for x 20-l-waste bin hakn4 hakv4 hakv2 hakv hakv hak2v4 hak2v2 hak2v hak2v Abfall-Kühler, Korpus verzinkt, Boden NIROSTA (.40) 055 x 75 x 760 mm (wxhxd), cooling unit left, for x 20-l-waste bin 055 x 75 x 760 mm (wxhxd), cooling unit right, for x 20-l-waste bin 55 x 5 x 970 mm (wxhxd), cooling unit left, for x 240-l-waste bin 55 x 5 x 970 mm (wxhxd), cooling unit right, for x 240-l-waste bin 655 x 75 x 760 mm (wxhxd), cooling unit left, for 2 x 20-l-waste bins 655 x 75 x 760 mm (wxhxd), cooling unit right, for 2 x 20-l-waste bins 890 x 5 x 970 mm (wxhxd), cooling unit left, for 2 x 240-l-waste bins 890 x 5 x 970 mm (wxhxd), cooling unit right, for 2 x 240-l-waste bins waste bin cooler for 2 x 20-l-waste bins hak2n4 hakn4 hakn2 hakn hakn hak2n4 hak2n2 hak2n hak2n Abfall-Kühler, Korpus und Boden NIROSTA (.40) 055 x 75 x 760 mm (wxhxd), cooling unit left, for x 20-l-waste bin 055 x 75 x 760 mm (wxhxd), cooling unit right, for x 20-l-waste bin 55 x 5 x 970 mm (wxhxd), cooling unit left, for x 240-l-waste bin 55 x 5 x 970 mm (wxhxd), cooling unit right, for x 240-l-waste bin 655 x 75 x 760 mm (wxhxd), cooling unit left, for 2 x 20-l-waste bins 655 x 75 x 760 mm (wxhxd), cooling unit right, for 2 x 20-l-waste bins 890 x 5 x 970 mm (wxhxd), cooling unit left, for 2 x 240-l-waste bins 890 x 5 x 970 mm (wxhxd), cooling unit right, for 2 x 240-l-waste bins hkakf hkakf4 hkadiv24 compact cooling unit as alternate device installation position right, 46 W, for 2 x 20-l- or 2 x 240-l-barrel coolers installation position left, 46 W, for 2 x 20-l- or 2 x 240-l-barrel coolers panelling of the attached cooling unit, 62 x 526 x 467 mm, NIROSTA (.40) brushed hkawr hkawr2 winter regulation for cooling unit winter activity control for cooling unit, with oil sump heater incl. thermostat, heating capacity 45 Watt winter activity control for cooling unit, pump-down-control, incl. pressostat and magnet valve, heating capacity 45 Watt 4 4 M valid from July 20 M/7

217 M/8 valid from July 20

218 HAGOLA-NIROSTA folding bars (HNK) folding bars Description NIROSTA folding bars, flexible and everywhere ready for operation NIROSTA folding bar with separate bar top NIROSTA folding bar with integrated work top Version: separate bar top bar cover top (HSA): - in NIROSTA (.40) brushed surface with surrounding bulge border - options: without sink with sink with 2 sinks with ribbed surface substructure: - jointless pressure foaming with galvanized steel lamination Version: integrated work top work top: - welded stainless steel frame with inserted plastic-coated plywood on both sides - optional without sink or with removable sink pedestal: - 40 x 20 mm stainless steel tubes with white plastic panel on sides stable and solid connection of the work top with the pedestal tilting (90 ) side walls space saving storage pedestal: - 40 x 20 mm stainless steel tubes with white plastic panel on sides tilting (90 ) side walls space saving storage N valid from July 20 N/

219 HAGOLA-NIROSTA folding bars (HNK) folding bars Folding bars with separate bar top Folding bars with integrated work top (compact plates) locking of the work top in built-up condition locking of the side walls in folded condition N N/2 locking of the work top valid from July 20

220 HAGOLA-NIROSTA -folding bar (HNK) folding bars with tube framework rack and white filling hnkr0097 hnkr20097 hnkr folding bars with separate bar top 000 x 970 x 700 mm, with 2 sinks centrical 2000 x 970 x 700 mm, with ribbed drainage surface and sink left 2000 x 970 x 700 mm, with ribbed drainage surface folding bar 2 sinks centrical hnkr0097 hnkr00972 hnkr20097 folding bars with integrated bar top (compact plates) 000 x 970 x 700 mm, sink centrical 2000 x 970 x 700 mm 9 9 with ribbed drainage surface and sink left hnkr20097 folding bar with ribbed drainage surface hnkr zsaag zsaag2 zsaag zsaag4 zsadiv2 zsadiv20 zsadiv2 zsadiv22 zsadiv2 pop-up waste sets, drain connections pop-up waste set for sink, with siphon and drip depression connection, /4" pop-up waste set for 2 sinks, with siphon and drip depression connection, /4" drain hose 0,80 m, for drip depressions and ribbed drainage surfaces drain hose, cut to size per running metre, Ø /4", with 2 fastening clips valve for overflow pipe /4" with overflow pipe, stainless steel polished valve for overflow pipe /4" with overflow pipe, stainless steel polished, with T-piece for drip depression drain, hose nozzle " valve for overflow pipe /4" with overflow pipe, stainless steel polished, hose nozzle " valve for overflow pipe /4" with overflow pipe, stainless steel polished, with GK-coupling valve for overflow pipe /4" with overflow pipe, stainless steel polished, with T-piece for drip depression drain, with GK-coupling zsakw4 zsakw5 cold water faucets, chrome-plated for single sink, with flushing tube/ connection hose for double sinks, with 2 flushing tubes/ connection hose folding bar sink centrical hnkr00972 folding bar with work top hnkr20097 N valid from July 20 N/

221 N/4 valid from July 20

222 HAGOLA-mobile refrigerated bar counters (HKTM) mobile bars for x 50 litres KEG-barrel Description Mobile refrigerated bar counters, combined space and continuous flow refrigeration, barrel compartment with separate bottle shelf for 0x -litre bottles mobile refrigerated bar counter valid from July 20 Version bar top First Class : - in NIROSTA (.40) brushed surface - surrounding downward edge - drip depression with prism drip plates* and column base - sink and pop-up set front, side walls and guest side in NIROSTA (.40) brushed surface refrigerated bar counter: - 4 heavy weight rollers, with shift lock - machine compartment door DIN left - insulated partition wall - refrigerated module 650 mm width, wing door DIN right with barrel edge protection, intended for x 50-litre-barrel - separate, lateral bottle shelf for 0x litre bottles - fixing chain for CO 2 -bottle - integrated central connection for water supply/ water drainage and power supply - smooth floor - jointless insulation flanged cooling unit: - Danfoss-cooling unit (or similar), max. 2 C ambient temperature, 72 Watt at 0 C VT - integrated circulating air technique with continuous flow refrigeration (R 4a) - current 20 V/50 Hz - filter dryer - automatic condensate evaporation - control unit with digital temperature display - ST-BUS interface for networking (data recording acc. to HACCP) - preset to 6 C cold room temperature * Prism drip plates are protected by European patent. N/5 N

223 4 HAGOLA-mobile refrigerated bar counters (HKTM) mobile refrigerated bar counters NIROSTA -bar top with lowered bulge border prism drip plates tap column Zylindra incl. tumbler tap cock with compensator, pressure gauge and beer pipe unit glass pressure rinser stainless steel overflow pipe with stainless steel valve and assembled drain connection front and panelling in NIROSTA (.40) brushed surface flanged compact cooling unit, plug-in version with continuous flow refrigeration CO 2 -bottle incl. fixing chain and pressure reducer barrel compartment with separate, lateral bottle shelf for 0x litre bottles water drainage /4 (hose connection) 040 water supply /2 (hose connection) power supply 20 V/50 Hz N valid from July Individual panelling N/6

224 HAGOLAmobile refrigerated bar counters (HKTM) mobile bars for one 50-l-KEG-barrel, with integrated space and continuous flow cooling hktm5072 hktm507 mobile bar basic equipment, without column bore hole complete with beer-pipe-unit, CO2-bottle, tap column 9 9 mobile bar basic equipment hktm5072 mobile bar complete with beer-pipe-unit hktm507 zssdiv6 zssdiv5 hssnz hgzsp zssrsm accessory beer-pipe-unit, -pipe, with pressure regulator, bracket for CO2-bottle, operating log book, clamps, hose nozzles, operation manual (sign), CO2-open jawed spanner, beer hose, CO2-hose CO2-bottle, 2 kg Zylindra, Ø 76,2 mm ("), chrome-plated brass, piston tap cock with compensator and control pressure gauge glass rinsing appliance for the cleaning of glasses with pre and post rinsing ring spanner, wrench size 2 /2" for Round-Line- and Hagotop-tap columns zsadiv2 cleaning brush for depression drain cleaning brush for drip depression-/floor drain, with Bowden cable, 00 mm long Zylindra chrome-plated hssnz hgzsp glass rinsing appliance glass rinsing appliance for the cleaning of glasses with pre and post rinsing 7 glass rinsing appliance hgzsp hepdiv8 hmediv0 stainless steel care product HAGOLA-stainless steel cleaning spray, 500 ml care product, finish for brass, 00 ml 6 6 N valid from July 20 N/7

225 N/8 valid from July 20

226 HAGOLA-mobile neutral bar counters mobile neutral bar counters for 2x 50 litre KEG-barrels Description mobile neutral bar counter valid from July 20 Version bar top First Class : - in NIROSTA (.40) brushed surface - surrounding downward edge - drip depression with prism drip plates* - sink and pop-up set front in NIROSTA (.40) brushed surface, side walls and guest side in Kömacell neutral bar counter: - 6 heavy weight rollers, with shift lock - stainless steel framework - machine compartment door DIN left with removable faceplate - partition towards the sink substructure - neutral bar counter, wing door DIN left incl. cleat, wing door DIN right with lock (fitted from the top) - floor in reinforced stainless steel - storage box for the dispensing log book (log book not in scope of delivery) - bracket and chain for CO 2 -bottle (bottle not in scope of delivery) - integrated connections for water drainage and water supply (stop valve for the water drainage) and mounted power socket (optional) * Prism drip plates are protected by European patent. N/9 N

227 4 HAGOLA-mobile neutral bar counters mobile neutral bar counters integrated connections and mounted power socket (optional) 06,5 577,5 600 storage box for the dispensing log book (log book not in scope of delivery) bracket and chain for CO 2 - bottle (bottle not in scope of delivery) Individual promotion foils on request N N/0 valid from July 20

228 HAGOLA-mobile neutral bar counters mobile bars hrgm6007 mobile neutral bar counters 600 x 880 x 600 mm, bar top with prism drip plates, sink and pop-up set, machine compartment door DIN left with upper faceplate, neutral bar counter with lockable wing door DIN left/right mobile bar counter hrgm6007 hrgdiv hrgdiv2 accessory water supply and -drain for mobile bar counter with sink, incl. power socket, complete assembled varnishing of the filling plate, available colours acc. to RAL-list, per square metre zsadiv2 cleaning brush for depression drain cleaning brush for drip depression-/floor drain, with Bowden cable, 00 mm long glass rinsing appliance hgzsp glass rinsing appliance for the cleaning of glasses with pre and post rinsing 7 glass rinsing appliance hgzsp hepdiv8 hmediv0 stainless steel care product HAGOLA-stainless steel cleaning spray, 500 ml care product, finish for brass, 00 ml 6 6 N valid from July 20 N/

229 N/2 valid from July 20

230 HAGOLA-catering technology accessory (HGZ) technical overview of the available built-in devices glass washing machines glass washing machine HOBART PREMAX GCP-/2, PROFI GCHK-N/2N glass washing machine HOBART PREMAX GP-70/7, PROFI GXHK-70N glass washing machine HOBART PROFI GX-70 N glass washing machine Winterhalter UC-S glass washing machine Winterhalter UC-M valid from July 20 O Technical and pricewise modifications reserved! Our known General Conditions of Delivery and Payment are valid O/

231 HAGOLA-catering technology accessory (HGZ) technical overview of the available built-in devices glass washing machines glass washing machine Fagor LVC-2 B ice cube machines glass washing machine Meiko FV ice cube machine Wessamat LE 2 ice cube machine Wessamat LE ice cube machine Hoshizaki IM-0 CLE/CLE-25 deep-freezing box ice cube machine Hoshizaki IM-45* CLE/CLE-25 * There is no standard built-in module available for this machine. The legs can be dismounted O deep-freezing box Helsinki B O/2 Technical and pricewise modifications reserved! Our known General Conditions of Delivery and Payment are valid valid from July 20

232 HAGOLAcatering technology accessory (HGZ) glass washer, net-prices (trade discounts not possible) glash washing machine Winterhalter UC-M hgzgs5 water demineralisation unit "VE-5K" hgzwe hgzgs26 hgzgs27 hgzgs2 hgzgs hgzgs28 hgzgs29 hgzgs0 hgzgs hgzdiv8 glass washer HOBART PROFI GCHK-N, connection 400 Volt, for glass basket size 400 x 400 mm PROFI GCHK-2N, connection 400 Volt, for glass basket size 400 x 400 mm, with installed reservoir PREMAX GCP-, connection 400 Volt, for glass basket size 400 x 400 mm, with Vapostop, avoids the escape of steam during opening the door PREMAX GCP-2, connection 400 Volt, for glass basket size 400 x 400 mm, with Vapostop, avoids the escape of steam during opening the door, with installed reservoir PROFI GXHK-70N, connection 400 Volt, for glass basket size 500 x 500 mm, with rinse aid programme/cold PROFI GX-70N, connection 400 Volt, for glass basket size 500 x 500 mm, with rinse aid programme/aqua-plus PREMAX GP-70, connection 400 Volt, for glass basket size 500 x 500 mm, with Vapostop, avoids the escape of steam during opening the door PREMAX GP-7, connection 400 Volt, for glass basket size 500 x 500 mm, with Vapostop, avoids the escape of steam during opening the door, with installed reservoir conversion charges lump sum rate for a conversion of a glass washer from E-connection 400 V to 20 V N N N N N N N N N hgzgs4 hgzgs7 hgzgs5 hgzgs8 glass washer Winterhalter UC-S, connection 20 Volt, glass basket size 400 x 400 mm UC-S, connection 20 Volt, with cold water post rinse programme, glass basket size 400 x 400 mm UC-M, connection 400 Volt, glass basket size 500 x 500 mm UC-M, connection 20 Volt, with cold water post rinse programme, glass basket size 500 x 500 mm N N N N hgzgs2 glass washer Fagor LVC-2 B, connection 20 Volt N hgzgs22 hgzgs2 hgzgs24 hgzgs25 glass washer Meiko FV-28, connection 20 Volt, for glass basket size 400 x 400 mm FV-28, connection 400 Volt, for glass basket size 400 x 400 mm FV-28 GiO, connection 20 Volt, with reverse-osmosis system, for glass basket size 400 x 400 mm FV-28 GiO, connection 400 Volt, with reverse-osmosis system, for glass basket size 400 x 400 mm N N N N hgzwe hgzdiv5 hgzdiv dish washer accessory water demineralisation unit VE-5K, incl. connection fitting lump sum rate for installation, instruction and start-up of glass washer UC-M/UC-S lump sum rate for installation, introduction and start-up of HOBART-glass washers N N N valid from July 20 built-in modules as tube framework in NIROSTA (.40) httbn x 890 x 600 mm, for HOBART PREMAX GCP, PROFI GC HK httbn x 790 x 600 mm, for HOBART PREMAX GCP, PROFI GC HK httbn x 890 x 600 mm, for HOBART PREMAX GP, PROFI GX HK httbn x 890 x 600 mm, for HOBART PROFI GX-70N httbn x 790 x 600 mm, for HOBART PROFI GX-70N httbn x 790 x 600 mm, for Winterhalter US-S httbn x 890 x 600 mm, for Winterhalter UC-S httbn x 790 x 600 mm, for Winterhalter UC-M httbn x 890 x 600 mm, for Winterhalter UC-M httbn x 890 x 600 mm, for Fagor LVC-2 B httbn x 790 x 600 mm, for Fagor LVC-2 B httbn x 790 x 600 mm, for Meiko FV 28 httbn x 890 x 600 mm, for Meiko FV 28 httbn x 890 x 600 mm, for MEIKO FV 28 GiO with osmosis-system *If applicable, please take into account the needed space for detergent bins and for the water demineralisation unit etc. O Technical and pricewise modifications reserved! Our known General Conditions of Delivery and Payment are valid O/

233 HAGOLAcatering technology accessory (HGZ) glass washing machines work top with basket depression hap0606h hap0606h hap0607a hap0706h hap0707a hgzdiv6 work tops with depression for glass washer baskets NIROSTA (.40) 600 x 50 x 660 mm, upright edge 7 mm 600 x 50 x 700 mm, downward edge 50 mm 700 x 50 x 660 mm, upright edge 7 mm 700 x 50 x 700 mm, downward edge 50 mm accessory lump sum rate for assembly of one built-in device in a non-refrigerating compartment 7 O valid from July 20 O/4 Technical and pricewise modifications reserved! Our known General Conditions of Delivery and Payment are valid

234 HAGOLAcatering technology accessory (HGZ) ice cube machines/deep-freezing box, net-prices are not eligible for discount ice cube machine "Wessamat LE 2" hgzeb5 hgzeb5 hgzeb6 hgzeb hgzeb2 hgzeb hgzeb4 ice cube maker Wessamat LE 2, daily capacity up to 24 kg Wessamat LE, daily capacity up to 5 kg Hoshizaki IM-0CLE, daily capacity up to 28 kg Hoshizaki IM-0CLE-25, daily capacity up to 24 kg Hoshizaki IM-45CLE, daily capacity up to 44 kg Hoshizaki IM-45CLE-25, daily capacity up to 9 kg N N N N N N ice cube machine "Wessamat LE " hgzeb6 ice cube machine "Hoshizaki IM-0CLE" hgzeb httbh httbh50860 httbh httbh60860 httbh50760 httbh50860 httbn50760 httbn50860 httbn60760 httbn httbn httbn hgztb hgztb4 built-in modules, casing in MB-TEX-plate, blind panels NIROSTA (.40) 500 x 790 x 600 mm, for Wessamat LE x 890 x 600 mm, for Wessamat LE x 790 x 600 mm, for Wessamat LE 600 x 890 x 600 mm, for Wessamat LE 500 x 790 x 600 mm, for Hoshizaki IM-0CLE/IM-0CLE x 890 x 600 mm, for Hoshizaki IM-0CLE/IM-0CLE-25 built-in modules as tube framework racks, casing and faceplates in NIROSTA (.40) 500 x 790 x 600 mm, for Wessamat LE x 890 x 600 mm, for Wessamat LE x 790 x 600 mm, for Wessamat LE 600 x 890 x 600 mm, for Wessamat LE 500 x 790 x 600 mm, for Hoshizaki IM-0CLE/IM-0CLE x 890 x 600 mm, for Hoshizaki IM-0CLE/IM-0CLE-25 deep-freezing boxes "Helsinki B", brown "Helsinki B", white N N httbh httbh built-in modules, casing in MB-TEX-plate, blind panel NIROSTA (.40) 600 x 790 x 600 mm, for "Helsinki B", blind panels brushed surface 600 x 890 x 600 mm, for "Helsinki B", blind panels brushed surface ice cube machine "Hoshizaki IM-45CLE" hgzeb httbn httbn built-in modules as tube framework racks, casing and faceplates in NIROSTA (.40) 600 x 790 x 600 mm, for Helsinki B, brushed faceplates 600 x 890 x 600 mm, for Helsinki B, brushed faceplates built-in module for LE 2 casing MB-Tex-plate httbh50860 hgztf hgztf2 hgztf hgztf4 hgztf9 hgztf hgztf0 hgztf2 NIROSTA (.40) panelling for wing door f. deep-freezg. box "Helsinki B", NIROSTA (.40) brushed sfc., mounted f. deep-freezg. box "Helsinki B", NIROSTA (.40) brushed sfc., not mounted f. deep-freezg. box "Helsinki B", NIROSTA (.40) linen-optic sfc., mounted f. deep-freezg. box "Helsinki B", NIROSTA (.40) linen-optic sfc., not mounted NIROSTA (.40) upper front panelling f. deep-freezg. box Helsinki B, NIROSTA (.40) brushed sfc., mounted f. deep-freezg. box Helsinki B, NIROSTA f. deep-freezg. box Helsinki B, NIROSTA (.40) brushed sfc., not mounted (.40) linen-optic sfc., mounted f. deep-freezg. box Helsinki B, NIROSTA (.40) linen-optic sfc., not mounted "Helsinki B", white hgztb4 hgzdr hgzdr2 hgzvr hgzub accessory for deep-freezing boxes set of plastic decor frames, for "Helsinki B", four pieces, white set of plastic decor frames, for "Helsinki B", four pieces, brown interlock for "Helsinki B", mounted conversion from wing door DIN right (standard) to DIN left hgzdiv6 accessory lump sum rate for assembly of one built-in device in a non-refrigerating compartment 7 valid from July 20 built-in module for "Helsinki B", version MB-tex httbh Technical and pricewise modifications reserved! Our known General Conditions of Delivery and Payment are valid O/5 O