Mazda North American Operations Irvine, CA

Size: px

Start display at page:

Download "Mazda North American Operations Irvine, CA"

Marvin Collins
6 years ago
Views:

1 Service Bulletin Mazda North American Operations Irvine, CA Subject: WRINKLES ON LEATHER SEAT SURFACE OF NEW VEHICLE Bulletin No: /16 MULTI-MODEL - WRINKLES ON LEATHER SEAT SURFACE OF NEW VEHICLE BULLETIN NOTE This bulletin supersedes the previously issued bulletin(s) listed below: The changes are noted in Red beside the change bars. Please print a copy of this bulletin for the upholstery repair specialist. Previously issued TSBs: Date issued: /12 03/23/2012 APPLICABLE MODEL(S)/VINS Mazda Mazda Mazda CX Mazda MX Mazda Mazda CX Mazda CX-9 DESCRIPTION At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure. Wrinkles on seat cushion Wrinkles on seat back Page 1 of 8 CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/ equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by do-it-yourselfers. Customers should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies, customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means, electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in writing.

2 NOTE: A qualified upholstery repair specialist is required for this repair procedure. Explain to the customer before performing the repair that the wrinkles may not be completely removed. Explain to the customer that the leather may develop some wrinkles due to aging or wear during normal use. This is normal behavior of the leather material. EQUIPMENT INFORMATION 1 Steamer - Commercial type 2 Lint-free cloths 3 Spray bottle (with water) 4 (Optional) Heat gun with variable heat control Page 2 of 8

3 REPAIR PROCEDURE There are two (2) repair methods available for this repair: COMMERCIAL STEAMER METHOD HEAT GUN METHOD This is the preferred method. This method should resolve most customer concerns. This is NOT the preferred method. Only use this method if the COMMERCIAL STEAMER METHOD is not sufficient. COMMERCIAL STEAMER METHOD Note: A qualified upholstery repair specialist is required for this repair procedure. Always follow the manufactures instructions for the steamer and heat gun. Do not apply the steamer head directly to the perforated sections of the leather seat surface (A). B - Non-perforated leather seat surface A - Perforated leather seat surface Page 3 of 8

4 1. Use a clean lint-free cloth to cover all seat belt buckles. CAUTION: Do not spray water on the seat belt buckles. Do not apply the steamer head directly on the latch anchor location buttons. Page 4 of 8

5 2. Choose one area at a time to work on. Apply the steamer head directly on the wrinkle until the upholstery material becomes warm. Move the steamer head in a outward motion (similar to ironing a shirt). Repeat until the wrinkles are removed to an acceptable level. CAUTION:Do not apply steam directly on the perforated sections of the leather seat surface. If necessary, use your hand to work out the wrinkles by applying firm pressure in a outward motion. This step can be repeated as long as the upholstery material is warm. If the upholstery material feels cool, reapply steam. 3. Repeat step #2 until the wrinkles are removed to an acceptable level. NOTE: Direct heat may be necessary to aid in the removal of some wrinkles. Refer to HEAT GUN METHOD. Page 5 of 8

6 Before After CAUTION: Do NOT keep the steamer head at the same place for a long time. Do NOT run the steamer head without a water-soaked cloth especially over seat trim beading and seat side trim area. Seat damage may occur if the caution points above are nor followed as shown below. Damaged seat side trim Damaged seat trim beading Page 6 of 8

7 HEAT GUN METHOD (optional) 1. Use a water spray bottle to pre-soak a lint-free cloth. 2. Use a heat gun with variable heat control. Set the heat range to the lowest setting. CAUTION: Do not apply direct heat on the perforated sections of the leather seat surface. Do not apply direct heat on the upholsteries stitching or beading. Do not apply direct heat on the latch anchor location buttons. Hold the heat gun at least 5 inches away from the upholstery material. Apply heat in a circular motion. Once the upholstery material reaches a warm temperature, use the pre-soaked cloth to apply firm hand pressure in a outward motion. Page 7 of 8

8 WARRANTY INFORMATION NOTE: This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair. This repair will be covered under Mazda s New Vehicle Limited Warranty term. Additional diagnostic time cannot be claimed for this repair. Warranty Type A Symptom Code 87 Damage Code Part Number Main Cause 9E Refer to EPC part number of concerned seat Quantity 0 Operation Number / Labor Hours: XXG23ARX / 0.0 Hrs. (1 seat) XXG23BRX / 0.0 Hrs. (2 seats) XXG23CRX / 0.0 Hrs. (3 seats) XXG23DRX / 0.0 Hrs. (4 & 5 seats) XXG23ERX / 0.0 Hrs. (6 seats) XXG23FRX / 0.0 Hrs. (7 seats) NOTE: Select correct labor operation number for the number of seats requiring repair. UPHOLSTERY REPAIR SHOP Cost to repair leather seats Sublet Invoice Number Sublet Type Code Sublet Amount Number from the upholstery repair shop invoice or dealer purchase order. Enter F6 Enter the upholster shop invoice amount. No mark-up allowed. Page 8 of 8

Mazda North American Operations Irvine, CA

Service Bulletin Mazda North American Operations Irvine, CA 92618-2922 Subject: AIR CONDITIONING MUSTY / MILDEW ODOR Bulletin No: 07-002/13 MULTI-MODEL - AIR CONDITIONING MUSTY / MILDEW ODOR BULLETIN NOTE