Unico Presentation. Abridged iseries

Transcription

1 Abridged iseries

2 Combines all the efficiencies and performance of inverter technology with all the features and benefits of The Unico System

3 Argoclima Group is a European leader in HVAC technology and applications. The headquarters and the main factory of the Argoclima Group, is located in the north of Italy, near Milan.

4 What is iseries? An Inverter Heat Pump Can be used for Air Conditioning, Heating, and Domestic Hot Water (DHW) through use of an optional de-superheater Outdoor and Indoor units can be matched to the desired configuration + =

5

6 What is iseries? SINGLE SPLIT: One Outdoor Unit and One Indoor Unit MULTISPLIT: One Outdoor Unit and up to Four Indoor Units SINGLE SPLIT One outdoor unit can be both single split and multi-split MULTISPLIT Easy installation. Every indoor unit is connected to outdoor unit with a simple flare connection.

7 FEATURES AND BENEFITS

8 Features that the market leaders in ductless air conditioning and heating do NOT have: Auxiliary Heat Lower Temperatures for Heating Operation Better defrost system, can operate when the system is in defrost mode Same outdoor unit can be used for both one to one and multi-split applications

9 Features that the market leaders in ductless air conditioning and heating do NOT have: Ability to do zoning with dampers A variety of third party thermostats Ability to cool or heat multiple rooms Ability to provide Domestic Hot Water

10 SPECIFICATIONS

11 Outdoor Units

12 Higher SEER IS30G80 with non-ducted inside units : SEER IS36G110 with non-ducted inside units: SEER IS30G80 with Unico and non-ducted SEER IS36G110 with Unico and non-ducted SEER I Series with Unico only SEER (from AHRI directory of Variable Speed Mini Duct Heat Pumps)

13

14 Wide modulation range Larger modulation means less electric consumption and more efficiency

15

16 UNIT SELECTION

17 Indoor units range IS12MPA IS24MPA U1218L-EA2TX M2430BL1-EA2 & M2430CL1-A M3036BL1-EA2 & M3036CL1-A

18 IS30G80 The Matrix

19

20 New Unico Units Unico Units U1218-1ET2AX M2430BL1-EA2 M2430CL1-A M3036BL1-EA2 M3036CL1-A Description FCU, 230V for I Series with Heat Pump Coil 2430 Module, Blower with I Series Inverter Control Board, EC Motor, 220V 2430 Module, Heat Pump Coil, I series Inverter 3036 Module, Blower with I Series Inverter Control Board, EC Motor 220V 3036 Module Heat Pump Coil, I Series Inverter

21 iseries and the Unico System Unico Presentation These Unico SDHV systems can be used in conjunction with the ISeries. U1218, M2430, M3036 Different Control Box and Coil Module SDHV

22

23 MP SERIES INDOOR UNIT

24

25

26

27

28 Remote Control

29

30

31

32 REFRIGERANT LINES

33 Refrigerant Line Circuits Refrigerant Line Circuits Labeled from 1 to 4 Hook up the first indoor unit to 1, second to 2, etc. Outdoor units have up to four circuits

34 Line Set Sizes For Size A : ¼ X 3/8 For Size B : ¼ X ½ For Size C ¼ X ½ For Size D 3/8 X 5/8

35

36

37 Unico Two Presentation Indoor Units Refrigerant Line Connections

38 Unico Size Presentation M3036 Detail

39

40 Torque Wrench Yellow Jacket Model #60650

41 Size Torque Settings (US) Tightening Torque ¼ ft./lb. 3/ ft./lb. ½ ft. lb. 5/ Ft. LB

42 LINE SET LIMITATIONS

43 Distance limits Two type of limits are to be considered: distance limits between indoor and outdoor units (Ln) and height difference limits (Hn).

44 Four Line Set Lengths Total Line Set length Longest Single Line Set Height Difference Between Indoor and Outdoor Unit Height Difference Between Indoor Units

45

46

47 Adding Refrigerant ¼ x 3/8 Line =.16 oz. per additional foot ¼ x ½ Line =.22 oz. per additional foot 3/8 x 5/8 Line =.49 oz. per additional foot

48 ELECTRICAL

49

50 Electrical Power to Unico Air Handler If you are using a Unico System (SDHV), the power is supplied to the control board on the Unico Blower Module Must be 230v single phase power

51

52 Communication Wire Must be RF shielded Ground ONE end (does not matter which end) 18/2 with ground shielded is very common All iseries Units will require a communication wire connection to the outside unit

53

54 Setting the Switches

55 Dip Switch 1 and 2

56 The IndoorB Board Includes two Fuses F1 and F2 F1 is 3.15A 250V (automotive type fuse) F2 is 100mA 250V (automotive type fuse)

57 The IndoorB Board (See installation manual) provides for: Alarm Condensate Pump Float Switch

58 Two Stage Thermostat

59

60 Unico Components Presentation of Thermostat Adapter Board Outputs C: Common S1: Stage 1 Auxiliary Heat S2: Stage 2 Auxiliary Heat S3: Stage 3 Auxiliary Heat AUX : 24V output (for hot water coil)

61

62 MMI BOARD

63 PREPARING FOR INSTALLATION

64 Refrigerant circuit GAS LINE

65

66

67 I Series Defrost

68 Intelligent Defrost and Dynamic Cold Draft Unico Presentation 1. No Cold Blow = No Cycle Losses 2. More Efficient, You never stop heating in the Defrost Mode 3. A trickle of hot gas directly from the compressor is used to prevent ice from forming

69 Cold Climate Heating I Series include two electric heaters in the outdoor unit 1. A condensate drain pan heater to prevent freezing 2. A crankcase heater to maintain oil flow in cold temperatures

70 Commissioning Report and Warranty

71 Outdoor Unit Information

72 Indoor Equipment

73 Refrigerant Lines

74 Thermostat Information

75 Optional Equipment

76