:45 Pagina 53 Press Fitting

Transcription

1 Press Fitting

2 Press Fitting Press Fit Machines RP 10-S Electro-hydraulic Unit For fast, safe and efficient pressed joints from 12mm to 108mm. Extremely Fast The electro-hydraulic press action allows better control over the crimping process than is possible with conventional units. Once a crimping cycle is started, the machine will lock-on and automatically complete the process without relying on the operator to keep the switch depressed. This ensures consistent, repeatable Press Fit integrity. Integral hydraulic pump. Automatic cycle control. Piston automatically retracts to initial position once cycle is completed. Only a few seconds crimping time. Gain more time - work more efficiently RIDGID Press Fit machines are built to last with tried and tested technology and deliver impressive performance, enabling system conform and secure connections to be produced in a matter of seconds. These tools feature the newest in Press Fit technology and deliver the durability you expect from a RIDGID tool. RIDGID Press Fit tools are suitable for most common Press Fit systems. Consistent controlled performance Unlike some other Press Fit machines, the RIDGID RP 10-S is equipped with a unique monitoring system that ensures every single crimping action is accurately made to the tolerances set by the leading manufacturers of press fittings. This monitoring system incorporates an acoustic signal to inform the operator if the pressure rate is outside the required settings. Pressure sensor with low pressure alarm. Built-in cycle counter. Acoustic service indication at 20,000 cycles. Automatic service shutdown after 22,000 cycles. 5m electric cable. Protective hand guard. Tough, impact-resistant, double insulated body. Professional 700W motor. Durability The RP 10-S is one of the best and advanced units available today and is suitable with most common used Press Fit systems. Economic efficiency of 100,000 cycles. Microprocessor control. Precision valve control prevents overpressure. Large filter in oil circuit for reliability. Ergonomically balanced design. Pressure relief valve. Technical Specifications Model: RP 10-S. Motor: 230V, 700W, 3.3A. Capacity: 12mm to 108mm for systems requiring 32kN. Crimping Force: Minimum 32kN. Sound pressure level: 74dB(A). Sound Power level: 87dB(A). Weight without jaw: 5.70kg. Operating Temperature: -5 C to +50 C. Cat. Capacity Description Weight No. mm kg RP 10-S Case V Machine RP 10-S Case V Machine mm Viega Jaws RP 10-S Case V Machine mm Viega Jaws Metal Carrying Case

3 - be more in control. Press Fit Machines Press Fitting Cycle counter with acoustic service indicator. Pressure relief valve. Pressure monitoring with low or high pressure alarm. Head can be rotated 90 right or left. Safety lock. Must be turned 180 to remove jaw. Jaw mounting compatible with most jaw types and brands. RIDGID jaws A range of RIDGID 12 to 54mm jaws suitable for Viega and other V-type systems. Complete range available per single jaw, per convenient kit or as a complete package of 3 jaws together with the Press Fit machines. Original RIDGID branded jaws for VIEGA Profipress and Sanpress systems. Cat. Capacity Description Weight No. mm kg mm Viega Jaw mm Viega Jaw mm Viega Jaw mm Viega Jaw mm Viega Jaw mm Viega Jaw mm Viega Jaw mm Viega Jaw mm Viega Jaw Set (in Plastic Case) 8.40 With the investment of a RIDGID Press Fit machine you are sure to have consistent, controlled and system conform connections. RIDGID Press Fit machines are suitable for use with several systems such as: VIEGA, MAPRESS, GEBERIT, COMAP, FRANKISCHE, HENCO, IBP, SANHA, VSH, It is recommended to follow the guidelines and instructions of the system suppliers when using Press Fit technology. 55

4 Press Fitting Press Fit Machines RP 300 Electro-hydraulic Unit The RP 300 electro-hydraulic pressing machine is a perfect addition to the RIDGID range of Press Fit machines. The Press Fit process is carried out in a few seconds. Built to last with tried and tested technology it again delivers an impressive performance. Technical specifications Model: RP 300. Motors: 230V, 600W, 2.8A 110V, 600W, 5.6A. Capacity: 12 to 108mm for systems requiring 32kN. Crimping force: minimum 32kN. Sound pressure level: 85dB(A). Sound power level: 98 db(a). Weight without jaw: 5.5kg. Operating temperature: -5 C to +50 C. Features for safety, reliability and efficiency Excellent handling and optimal ergonomics. Pressure relief valve reduces oil pressure at once and the piston is brought back to its starting position. Jaw pin closure safety feature prevents start if retaining bolt is not completely inserted. Fully automatic press operation with return to start position. Compatibility The RIDGID RP 300 (Von Arx Typ II) is compatible when using original system jaws for: VIEGA systems up to 108mm. MAPRESS systems up to 54mm. GEBERIT MEPLA systems up to 63mm. Cat. Model Description Weight No. No. kg RP 300 Case + 230V Machine RP 300 Case + 230V Machine mm Viega Jaws RP 300 Case + 230V Machine mm Viega Jaws RP 300 Case + 110V Machine RP 300 Case + 110V Machine mm Viega Jaws RP 300 Case + 110V Machine mm Viega Jaws Metal Carrying Case

5 Press Fit Machines Press Fitting RP 300-B Electro-hydraulic Battery Powered Unit The RIDGID RP 300-B electro-hydraulic battery powered Press Fit machine provides the necessary room to maneuver thanks to its lightweight, compact design and construction. With a high power battery and a rotating head it is ideal to work in tight spaces without a power cord getting in the way. Compatibility The RIDGID RP 300-B (Von Arx Typ III) is compatible when using original system jaws for: VIEGA systems up to 108mm. MAPRESS systems up to 54mm. GEBERIT MEPLA systems up to 63mm. The RIDGID RP 300-B monitors functions to guarantee perfect press operations. Condition and event are shown on the LED display. Additionally, incorrect press operations are indicated by acoustic alert (beep signal). Monitored are Jaw pin closure. Pressing time. Oil temperature. Battery capacity. Service interval. Features and benefits Fully automatic press operation with return to start position. Acoustic service indication at 20,000 cycles. Automatic service shutdown after 22,000 cycles. Jaw pin closure safety feature. Head can be rotated 90. Technical specifications Model: RP 300-B. Motor: 14.4V, 350W, 2.6Ah. Capacity: 12 to 108mm for systems requiring 32kN. Crimping force: minimum 32kN. Sound pressure level: 76dB(A). Weight incl. battery: 4.7kg. Operating temperature: -5 C to +50 C. Cat. Model Description Weight No. No. kg RP 300-B Case + Machine + Battery + Charger RP 300-B Case + Machine + Battery + Charger mm Viega Jaws RP 300-B Case + Machine + Battery + Charger mm Viega Jaws V Battery Charger for 14.4V Battery Plastic Carrying Case 4.50 See page 58 for LED display info. 57

6 Press Fitting Press Fit Machines RP 10-B Electro-hydraulic Battery Powered Unit The RIDGID RP 10-B battery powered Press Fit machine makes perfectly pressed joints quickly and efficiently, from 12mm to 108mm. Technical specifications Model: RP 10-B. Battery: 24V, 350W, 1.7Ah. Capacity: 12mm to 108mm for systems requiring 32kN. Crimping force: minimum 32kN. Weight with battery: 5.8kg. Operating temperature: -5 C to +50 C. Sound pressure level: 85dB(A). Sound power level: 98dB(A). The RIDGID RP 10-B monitors functions to guarantee perfect press operations. Condition and event are shown on the LED display. Additionally, incorrect press operations are indicated by acoustic alert (beep signal). The RP 10-B has following benefits Fully automatic press operation with return to start position. Acoustic service indication at 20,000 cycles. Automatic service shutdown after 22,000 cycles. Jaw pin closure safety feature. Head can be rotated 90. The pressure relief valve reduces oil pressure at once and the piston is brought back to its starting position. High power 24V battery. Monitored are Jaw pin closure. Pressing time. Oil temperature. Battery capacity. Service interval. Cat. Model Description Weight No. No. kg RP 10-B Case + Machine + Battery RP 10-B Case + Machine + Battery + Charger RP 10-B Case + Machine + Battery + Charger mm Viega Jaws RP 10-B Case + Machine + Battery + Charger mm Viega Jaws V Battery Charger for 24V Battery Metal Carrying Case Machine status signals ON/OFF switch prevents unintentional start of the machine. Green LED indicates that the machine is switched on and ready to begin a press cycle. Yellow LED indicates servicing is required. Red LED indicates a problem with the machine or jaw pin not completely inserted. An acoustic warning signal indicates that a press cycle has not been performed correctly.